Jaipur Development Authority Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 1,68,76,040Document Cost
₹ 5,000Tender Fee
₹ 2,500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_JDAJP_445341_1Tender No
JDA_EETW1_2024_25_NIB_4Tender Authority
Jaipur Development Authority ViewPurchaser Address
-Website
http://jda.urban.rajasthan.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Granular courses
3382.08
682
2306580.61
... More
Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.
In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.
-
-
-
... More
Depth upto 1.5 m
33003.14
169
5577530.15
... More
Add extra for over all depth of excavation above 1.5 m and upto 3.0 over item no 4.9.1.1
10674.94
25
272211
... More
Add extra for over all depth of excavation above 3.0 m and upto 4.5 m over item no 4.9.1.1
300.43
54
16373.44
... More
Add extra for over all depth of excavation above 4.5 m and upto 6.0 m over item no 4.9.1.1
50.43
88
4437.84
... More
Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301.
For all type of soil
29215.14
171
4995788.94
... More
CARRIAGE OF MATERIALS (By Mechanical Means)
Remarks : The rates will be applicable to net quantities after deduction of percentage for voids mentioned in the specification under subhead "Carriage of Materials"Carriage of Materials by mechanical transport including loading,unloading and stacking ::
-
-
-
... More
Earth (Rate for Lead 5 Km)
50918.34
88
4530713.89
... More
Stone, boulders, gravelly material (Rate for Lead 5 Km)
9506.1
83
796040.81
... More
Providing, laying and compacting plain/ reinforced cement concrete of specified grade in foundation/ levelling course/ pile cap using concrete mixer and vibrater complete including cost of form work, as per drawing and technical specifications and as per clause 1100, 1500,1700,2100 of MoRT&H specification including all scaffolding material, labour, machinery.
-
-
-
... More
PCC Grade M -15
2271.1
3840
8721020.16
... More
PCC Grade M -20
54
4310
232740
... More
Providing, laying and compacting design mix plain/ reinforced cement concrete of specified grade in foundation/ leveling course/ pile cap using batching plant, transit mixer and concrete pump and vibrater including cost of form work, complete as per drawing and technical specifications as per clause 1100, 1500,1700,2100 of MoRT&H specification including all material, labour, machinery, and maintenance of diversion.
-
-
-
... More
PCC Grade M -20
64.8
4580
296784
... More
RCC Grade M -20
291.6
4640
1353024
... More
RCC Grade M-25
32
5010
160320
... More
RCC Grade M -30
101.7
5020
510534
... More
RCC Grade M -35
6289.38
5100
32075858.4
... More
Providing and laying structural plain/ reinforced cement concrete (design mix) of specified grade in substructure at all levels using batching plant, transit mixer, concrete pump and vibrater including cost of form work complete as per drawing and clause 1500, 1700 and 2200 of MoRT&H specification including all scaffolding, material, labour, machinery etc.
-
-
-
... More
RCC Grade M-25
2831.39
5460
15459389.4
... More
RCC Grade M-30
107.22
5480
587571.08
... More
Providing and laying structural Reinforced cement concrete (design mix) of specified grade using batching plant, transit mixer, concrete pump and vibrater in approach slab, friction slab, edge beam, footpath and kerb as per approved drawing and specification as directed by the Engineer as per clause 1500 &1700 of MoRT&H specification including all scaffolding, material, labour, machinery etc
RCC M-35
1338.12
6340
8483680.8
... More
Bored cast-in-situ R.C.C. pile with design mix concrete using batching plant, transit mixer and concrete pump, excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m. as per clause 1100, 1600 & 1700 of MoRT&H Specification including all material, labour and machinery. 1200 mm dia pile RCC Grade M -35 (Design mix)
7260
9850
71511000
... More
Providing and laying structural plain/ reinforced cement concrete (design mix) of specified grade in substructure at all levels using batching plant, transit mixer, concrete pump and vibrater including cost of form work complete as per drawing and clause 1500, 1700 and 2200 of MoRT&H specification including all scaffolding, material, labour, machinery etc.
RCC Grade M -40
4949.58
5620
27816628.36
... More
Providing and constructing of Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with specified grade concrete using batching plant, transit mixer, concrete pump and vibrator with 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design and dimensions in the approved drawing and at locations directed by the Engineer, all as specified as per clause 809 of MoRT&H specification including all material, labour scaffolding etc.
RCC Grade M-40
653.11
6170
4029688.7
... More
Providing and laying structural reinforced/ prestressed cement concrete (design mix) of specified grade using batching plant, transit mixer, concrete pump and vibrater in superstructure at all levels including cost of steel form work complete as per clause 1500, 1600 and 1700 of MoRT&H specification including all scaffolding, material, labour, machinery etc.
RCC/PSC Grade M -45
For Solid Slab and Cross Girders Superstructure
3306.4
6340
20962576
... More
Providing, precasting, transportation and placing in position at all level precast pre/post-tensioned specified grade girders as per drawing and clause 1800 & 2300 of MoRT&H specifications (excluding cost of reinforcement, HTS strands and pre-stressing) including all material, labour, machinery (suitable crane).
RCC M -45
3447.84
9450
32582088
... More
Providing and laying reinforced cement concrete wearing coat M-30 grade at any level including formwork and reinforcement @ 75kg/cum complete as per drawing and technical specification and as per clause 2702 of MoRT&H Specification including all material, labour, machinary etc.
328.8
9720
3195936
... More
Providing and laying TMT bar reinforcement at any level in foundation/ pile/ pile cap complete as per drawing and clause 1600 of MoRT&H Specification including all material, labour and machinery.
1538.18
64600
99366428
... More
Supplying, fitting and placing TMT bar reinforcement in sub structure/ superstructure at all level complete as per drawing and clause 1600 & 2200 of MoRT&H Specification including all material, labour, machinery etc.
2352.77
65700
154576923.3
... More
Providing and laying High tensile steel wires/ strands at any level including all accessories for stressing, stressing operations and grouting complete as per drawing, technical specification and as per clause 1800 of MoRT&H Specification.
186
147900
27509400
... More
Supplying, fitting and fixing in position true to line and level Elastomeric Bearing conforming to IRC:83 (Part-II) section IX and clause 2005 of MoRT&H specification complete including all accessories as per drawing and technical specification and as per clause 2000 & 2200 of MoRT&H Specification including all scaffolding, material, labour, machinery etc
366300
-
274725
... More
Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRT&H Specifications complete as per drawing and approved technical specifications and as per clause 2000 & 2200 of MoRT&H Specification including all scaffolding,material, labour, machinery etc.
79200
308
24393600
... More
"Fabrication, Welding, Riveting, olting by HSFG bolts wherever required, supply, transportation to site, Assembling, Launching, Erecting of steel girder spans as per drawings and specifications approved by Railway and department for composite construction i.e.
(Steel +RCC) of superstructure of the Road Over Bridge with contractor’s own mild steel confirming to IS: 2062 Grade 250(B) with all welds, rivets, nuts bolts rivet materials, weld materials, HSFG bolts, service bolts, with other ancillary steel structures fixed to the girder where necessary in proper level and alignment and as per technical specifications etc. with contractor’s own materials,fabrication, machinery, templates, fixtures, equipments tools and plants, transportation to site, skilled/ unskilled labour, excise duty.,Octroi, sales tax and other taxes, all leads and lifts, descent, loading,unloading, crossing one or more Railway track if required etc.complete and as per technical specifications. The rate shall also be inclusive of cold straightening of deformed and bent girder parts before their assembly. The structural steel to be used should be manufactured by SAIL/ RINL/ TISCO/ ESSAR/ JINDAL only. For Painting prior approval for superior brand/ make of the paint should be taken from engineer in charge."
"The rate shall be inclusive of supply, erection and dismantling of staging and scaffolding and other temporary arrangements required for the purpose of assembly, erection and launching of girders. The rate shall also be inclusive of cold straightening of deformed and bent girder parts before/after their assembly."
"Metalising girder/ girder component such as cross girder, top chord channels, bracing etc of BG new steel girder as directed by engineer with epoxy paint spray not less than two layers after preparing surface by sand/grit blasting as per provision laid in Appendix VI of IRS B-1179 code ( latest alteration) including one coat wash primer one coat epoxy zinc crome primer and two coat of epoxy paint with approved paint conforming to IS specification for fabrication & erection of steel girder bridge ( RS B 1-79) as corrected up to date with contractor’s own materials, tools, plants, labour, handling, rehandling if any including all lead, lifts descents, crossing of track/ obstruction etc. complete in all respectand as per direction of the engineer.
Note:1. The fabrication of girders must be got done from RDSO
approved firms only.
2. For Payment purpose, nominal weight of the girder as per drawing will only be considered.
300000
136
40800000
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
143510.23
88
12700655.71
... More
Providing, laying and fixing of strip seal expansion joint catering to maximum horizontal movement upto 70 mm complete as per approved drawings and as per clause 2600 of MoRT&H specifications to be installed by manufacturer's authorized representative ensuring to compliance to manufacturer's instruction for installation including preparing the edges of bridge, welding to exposed reinforcement, concreting with design mix of grade of bridge or M-35 whichever is richer including all material, labour, machinery etc complete.
456.8
9060
4138608
... More
Providing and fixing G.I. Pipes railing of 80 mm dia. (Class B) over brackets of 16 mm thick MS plate with 200 mm at bottom & 120 mm at top with 200 mm height welded to 16 m thick MS Plates of size 200 X 175 anchored with 400 mm long 4-12 mm dia.steel bars at the top of RCC crash barrier @1.0m c/c including fixing arrangement as per the drawing, clause 800 of MoRTH specification and as per the direction of the Engineer.
2179.12
1170
2549570.4
... More
Providing and erecting Drainage Spouts with 0.15m long GI pipe 150mm dia and GI bolt 10mm dia with Galvanised MS flat clamp complete as per drawing and Technical specification as per clause 2705 of MoRT&H specifications including all material, labour, machinery etc.
274
862
236188
... More
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.
187.68
394
73945.92
... More
Providing structural steel liner upto 10mm thickness for curbs,steining for wells and piles including fabricating and setting out as per detailed drawing as per clause 1200 & 1900 of MoRT&H specification including all material, labour and machinery.
92.16
71600
6598656
... More
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRT&H specifications with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification including all material, labour, machinery as per clause 710.1.4 of IRC:78 and clause 2200 of MoRT&H specification.
3297.36
1150
3791964
... More
Designing, providing and erection of Precast RCC facia panels of minimum thickness 180mm made with M-35 Grade concrete batching plant, transit mixer, concrete pump and vibrater for retaining earth with all elements and accessories including reinforcing element, complete as per approved drawing and clause 3100 of MoRT&H specifications including all material, labour, machinery etc. (Scope of work includes designing, getting approval, casting in yard including reinforcement, curing, storing, transporting, lifting, placing in position, erection with all necessary fasteners etc complete).
2537.6
4620
11723712
... More
Providing, placing and compacting to desired density approved backfill material in layers as per approved methodology including testing for reinforced fill portion and random fill portion in the approaches between the Reinforced Soil (RS) Wall panels as per approved drawings as per clause 3103 of MoRT&H specification The soil should be predominately coarse grained not more than 10% of particle should pass 75 micron sieve The item shall be measured and paid for the finished volume of backfill and sub-grade placed in position excluding the volume of filter media at base and behind the RS walls.
23084.64
383
8841417.12
... More
Providing, laying, spreading and compacting of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per MoRT&H specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. For grading-II material
12139.32
1050
12746286
... More
Providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (WMM) base course comprising of graded stone aggregate and granular material conforming to MORT&H specifications (Table 400-II) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per MoRT&H specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion.
14115.5
1300
18350150
... More
Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per MoRD Specification Clause 502.
Low porosity
54831.6
31
1727195.4
... More
Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per MoRD Specification Clause 502.
Medium porosity
4692
36
168912
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) sqm using emulsion pressure distributor at the rate of 0.30 to 0.35 kg per sqm on the prepared non-bituminous surfaces (cement concrete pavement) cleaned with Hydraulic broom as per MoRD Specification Clause 503
Tack Coat
9800.48
12
123486.05
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) sqm using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRD Specification Clause 503.
Tack Coat
73312.33
9
659810.97
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRD Specification Clause 503.
Tack Coat
59523.6
10
642854.88
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per MoRD Specification Clause 503.
Tack Coat
16000
10
172800
... More
Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specifications Clause 507 complete in all respects.
for Grading II ( 19 mm nominal size )
7651.8
2722
20832036.39
... More
Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 509 complete in all respects
for Grading-II (13 mm nominal size) Bitumen (VG-30)
6429.06
2934
18862862.04
... More
Providing and laying 25 mm thick bitumen mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 (including cost of anti-stripping compound wherever required) @ 14-17% (by weight) as per job mix formula, coarse aggregate as per Table 500-32, fine aggregate as per Table 500-31 and lime stone powder as filler, prepared by using mastic cooker and laid to required level and grade after cleaning the surface, including providing antiskid surface with bitumen precoated finegrained hard stone chipping of 13.2 mm nominal size @ 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces not less than 100 degree Centigrade, protruding 1 mm to 4 mm over mastic surface, all complete including all material, labour, machinery, lighting, guarding and maintenance of diversion complete as per clause 515 of MoRT&H specification.
14992.48
544
8155909.12
... More
Plie load testing on single vertical piles in accordance with IS 2911 (Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per direction of Engineer and as per clause 1100 of MoRT&H specification including all labour, material,machinery.
-
-
-
... More
Initial and routine vertical load test
1500
303
454500
... More
Lateral load test
100
6050
605000
... More
Non destructive Integrated testing of cast-in-situ pile using pile deriving analyzer or equivalent as detailed in specification and as approved by Engineer.
244
1650
402600
... More
Load testing of one or more spans of bridge as selected by the Engineer as per approved load test procedure following relevant IS/IRC/Railway codes with contractor’s labour, deflection measuring instruments, loading materials, recoding and analyzing the load testing results including all lead & lift, etc. complete as required. The rates are all inclusive and will be paid after load test is finished and girder is cleared of the kentledges /loading material etc. The load shall be 1.25 times the stipulated design load Based on Design load
& not span (Load = 200 T)
-
-
-
... More
For span design load upto 100 MT.
2
220000
440000
... More
Extra for increase of 100 MT or part thereof in the span load capacity upto 800 MT.
4
27500
110000
... More
Providing weep holes in brick/ stone masonry/ Plain/ Reinforced concrete abutment, wing wall/ return wall with following dia AC pipe, extending through the full width of the structure with slope of 1V : 20H towards drawing face complete as per drawing, technical specifications and clause 2205 of MoRT&H Specification including all scaffolding, material, labour, machinery etc. 150 mm Dia
2232.64
122
272381.47
... More
Providing and fixing reinforced concrete precast kerb stone or dand R.Mtr of M-20 grade cement concrete 120 cm long having 4 Nos. bars of 8 mm dia hysd and stirrups 6 Nos of 6 mm dia as per IS with in built provision of interlocking of jointing and lifting compaction of reinforced concrete by mechanical and table vibrators jointing at site with cement mortar 1:4 complete in all respect as directed by Engineer incharge on: 100 mm thick cement concrete 1:4:8 (1 Cement : 4 Coarse sand : 8 stone aggregate 20 mm thick nominal size) including excavation of earth and cutting of BT road cutting of WBM road etc. and disposal of surplus material with all lead and lift. The size of kerb shall be (11.5+16.5)/2*30+(16.5*7.5)
2000
617
1234000
... More
Painting two coats on specified surface with synthetic enamel paint of approved brand and shade, after thorough cleaning and necessary filling to give even shade as per clause 803 of MoRT&H Specification including all material, labour.
On new plastered concrete surface
14007.47
83
1162620.18
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade
New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm)
44771.2
90
4051793.6
... More
P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.
160 mm dia
2080
225
468000
... More
Providing and fixing of precast concrete interlocking tiles of desired shape of M 30 grade manufactured from fully computerized automatic stationery hydraulic viebro pressed machine and fully computerized automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. Tensile splitting strength, abrasion and braking load etc. as per BS 6717:2001, Grey cement.
80mm thick
3400
541
1839400
... More
Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for 'AA' class loading as per IRC specifications including the effect of impact, EQ etc. complete on firm base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal sizes. The work includes required safety measures, construction of drain for diversion of flowing water, cost of design of RCC Precast Box and its proof checking from IIT/MNIT Jaipur etc. complete in all respect as per specifications
Size 1.00 M x 1.00 M
3000
10600
31800000
... More
Construction of solid block masonry of M20 grade solid concrete block having nominal size 400 mm x 200 mm x 200
mm in cement mortar 1:3 upto plinth level with all lead & lift.
75
6291
471825
... More
Plastering with cement mortar (1:3) on Brick/stone work in substructure/ super structure at any height complete as per clause 1312 of MoRT&H specification including all material, labour, scaffolding etc.
20 mm plaster on stone work
304.36
171
52045.56
... More
Providing and fixing CLOSE timbering in foundation, trenches etc at all depth including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).
3000
122
366000
... More
Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP4 class (with s/s ends) IS: 458 - 2003 (amended up to date) marked and pipes from 300 mm and upto 1800 mm manufactured through vertical casting process at all depths with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets, lubricants) as per drawing, sectional testing of the sewer pipe line (including cost and conveyance of water to site) etc., complete as per specification and / or as directed by Engineer.
300 mm internal diameter
500
973
486500
... More
Providing granular bedding having width = outer dia of pipe (Bc) + 500mm, thickness below pipe = 0.25Bc or 100mm (whichever is higher) and haunching = 0.5Bc, with graded hard crusher broken stone of 100% passing through 20mm sheive, 20 to 50 % passing through 10mm sheive and 100 % retain on 6.3mm sheive, laying in layers of thickness 10/15cm including ramming, consolidation etc complete for all type of pipes of following sizes as per drawing and or as directed by Engineer.
300 mm internal diameter
500
164
82000
... More
Providing, fixing and constructing of pre-cast RCC M-40 grade circular manholes with internal dia 1.20m and up to specified depth having pre-cast RCC M-40 grade conical piece 0.69m top dia, 1.2m bottom dia, 0.92m total height (0.631m cone height), 125mm wall thickness with inbuilt manhole cover frame on top and circular ring on bottom, required no of pre-cast RCC M-40 grade circular ring of dia 1.2m, height 300/ 225/ 150mm and wall thickness 125mm including concreting PCC M-10 grade (1:4:8) for 150mm thick, 1.4m dia foundation, PCC M20 for 1.3m dia benching and channel portion and up to top level of sewer pipe etc complete with curing compaction and form work, supplying and fixing heavy duty SFRC manhole cover as per IS 12592 (Part I and II) complete in all respect including shuttering, reinforcement steel, testing for water tightness and fixing ferro-cement foot steps complete in all respect (including the cost of manhole cover and frame) as per specification and the direction of the Engineer.(Note:- Excavation of earth work and road cutting for manhole will be measured and paid separately) Providing and fixing pre-cast RCC M-40 grade circular ring of dia 1.2m, height 300/225/150mm for constructing extra depth of manhole for depth beyond 0.92m as per drawing and direction of Engineer.
-
-
-
... More
Pre-cast RCC M-40 grade circular manholes 0.92 mtr deep to invert with pre-cast conical piece, 1 no pre-cast circular ring, Cast-in-situ PCC M-10 grade foundation, PCC M15 grade benching and channel portion
12
15400
184800
... More
Providing and fixing pre-cast RCC M-40 grade circular ring of dia 1.2m, height 300/225/150mm for constructing extra depth of manhole for depth beyond 0.92m as per drawing and direction of Engineer.
36
3870
139320
... More
Providing, fixing and constructing of pre-cast RCC M-40 grade circular manholes with internal dia 1.50m and up to specified depth having pre-cast RCC M-40 grade conical piece 0.69m top dia, 1.5m bottom dia, 1.22m total height (0.931m cone height), 125mm wall thickness with inbuilt manhole cover frame on top and circular ring on bottom, required no of pre-cast RCC M-40 grade circular ring of dia 1.5m, height 300/ 225/ 150mm and wall thickness 125mm including concreting PCC M-10 grade (1:4:8) for 150mm thick, 1.7m dia foundation, PCC M20 for 1.6m dia benching and channel portion and up to top level of sewer pipe etc complete with curing compaction and form work, supplying and fixing heavy duty SFRC manhole cover as per IS 12592 (Part I and II) complete in all respect including shuttering, reinforcement steel, testing for water tightness and fixing ferro-cement foot steps complete in all respect (including the cost of manhole cover and frame) as per specification and the direction of the Engineer.(Note:- Excavation of earth work and road cutting for manhole will be measured and paid separately)
-
-
-
... More
Pre-cast RCC M-40 grade circular manholes 1.22 mtr deep to invert with pre-cast conical piece, 1 no pre-cast circular ring, Cast-in-situ PCC M-10 grade foundation, PCC M15 grade benching and channel portion
12
20300
243600
... More
Providing and fixing pre-cast RCC M-40 grade circular ring of dia 1.5m, height 300/225/150mm for constructing extra depth of manhole for depth beyond 1.22m as per drawing and direction of Engineer.
27.36
4530
123940.8
... More
Providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.
4773.88
803
3833424.84
... More
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 3 metre long and size 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including all material, labour.
-
-
-
... More
90 cm equilateral triangle
35
4130
144550
... More
60 cm circular
25
3660
91500
... More
90 cm high octagon
15
6390
95850
... More
Providing and fixing “SWISS” type bollard 134cm height made out of 1.25mm thick M.S. sheet welded in conical section having upper dia 15cm and lower dia 20cm with another attachment of mandatory 7mm thick plate and fixed with the help of 7cm long, 30cm dia chrome plated MS tube, this part is fixed on the body with another attachment of a cap 30x7cm, whole body is painted in black stove enamel and mandatory plate in azure blue with one compulsory keep left arrow with 10mm border reflective strip each of 7.5cm on body complete in all respect including all material, labour, diversion.
10
1480
14800
... More
SITC of Crystal control Solar Road warning Blinker system with solar panel module with 300mm LED Module of minimum 190 Nos., Blinker Units, Charging circuit, suitable SMF Rechargeable Battery (12 Volt), including wiring, connections etc. complete in all respect
6
13100
78600
... More
Providing and fixing CAT’s eye made of aluminium alloy size 75x100x22mm having 21 biconvex lenses embedded in circular disk of AS plastic on each side on road surface complete including all material, labour, diversion.
4500
195
877500
... More
Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting 2 mm thick framed to angle iron 40x40x5mm with area exceeding 0.9 sqm supported on two nos mild steel angle iron post 75 mm x 75 mm x 6 mm, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including all material, labour.
180
9650
1737000
... More
Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings.
30
1080
32400
... More
Providing and fixing SOLAR DELINATOR made of ms pipe of 48/63 mm, dia upper top of iron cage 1 Meter Pole Energy: green led warning strobe light 3.2 Volt 600 mAh Illumination: 4 High Intensity Super Bright LEDs Cover Material: PC Function: flash- stable -close 6 Hour Sun Charged: Operates 60 Hours (Flash Mode) Photocontrol: Automatic on at Dusk; Off at Dawn IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification. The delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, dia of ms pipe 48/63 MM DIA and shall extend not more than 50 mm below the ground while being installed
50
1548
77400
... More
Providing & Fixing of Hydrose LED Kerb stone of size 500mm X X 150 mm 200mm and curb angle of 45 degrees having load carry capacity upto 800kg Led Strip & Connectors to be plastic coated in order to prevent exposure from moisture/water LED strip Length 465mm at an operation voltage of 36Volts with 22 no led in each strip with built in provision of interlocking of jointing and lifting compaction by placing 2 foundation rods in 1st & 5th leg of the curb stone & connecting male female wires between the blocks jointing at site with cement mortar 1:4 complete in all respect as directed by Engineer incharge on: 100 mm thick cement concrete 1:4:8 (1 Cement : 4 Coarse sand : 8 stone aggregate 20 mm thick nominal size) including
excavation of earth and cutting of BT road cutting of WBM road etc. and disposal of surplus material with all lead and lift.
250
4761
1190250
... More
Providing & Fixing Black Cadappa Cobble (4" X 4" x 3") Stone flooring work dressed stone (4" X 4") 3" thick in honed finished with pattern as per approved design over 25-50mm thick base in CM 1:6 including pointing with cement sand mortar 1:2 (1 cement :2 sand) match the shade of stone with joint. The cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and adhesive etc complete in all respect as per direction of Enginner in charge
500
2160
1080000
... More
Providing cutting, hoisting and fixing in position including fabrication of 4mm thick aluminium composite panel sheet (ACP) made of two aluminium sheet of 0.50mm thick each having a distance of 3.00mm filled with rubber polymer to the entire satisfaction of engineer in charge confirming to various concerned ASTM standards includes nuts and bolts/ riveting
As Per Order No. JDA/Ex. En. (TA to Dir. Engg. -I)/2021-22/D-99 Dated 30/11/2021 Approved by Dir.Engg-I.
206.4
1180
243552
... More
Supplying and fixing of micro prismatic retro reflective sheeting confirming to type XI of ASTM D4956, shall be pressure fixed to the full face of the ACP sheet as back ground sheet (in approved colour) and the top layer will be overlaid with electro cut transparent film of approved make and colour to create the desired road sign including cutting, cleaning and pasting etc. Complete as per design, drawing and direction of engineer in charge. (Payment shall be made for flat area of sheet), Make 3M/Avery Dennison or equrvalent as approved by EIC, Confirming to type XI of ASTM D4956
As Per Order No. JDA/Ex. En. (TA to Dir. Engg. -I)/2021-22/D-99 Dated 30/11/2021 Approved by Dir.Engg-I.
206.4
4620
953568
... More
Supplying & Installation of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg jested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There should be current losses of less than 20 micro-amperes at 2.4 V in sleep-charging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm X 100 mm X 100 mm. Also the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy rasin based adhesive as per manufacture’s recommendation and complete as directed by the engineer. (manufactured from 3M or equivalent)
200
2151
430200
... More
Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP4 class (with s/s ends) IS: 458 - 2003 (amended up to date) marked and pipes from 300 mm and pto 1800 mm manufactured through vertical casting process at all depths with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets, lubricants) as per drawing, sectional testing of the sewer pipe line (including cost and conveyance of water to site) etc., complete as per specification and / or as directed by Engineer.
900 mm internal diameter
500
5670
2835000
... More
P & Fixing M.S. sheet on existing angle iron frame by means of nuts and bolts and making required no. of holes for fixing accessories including two coat of red oxide paint and two coats of enamel paint etc. as required.
1.6 mm thick
2450
792
1940400
... More
Brick masonry work in cement mortar with mechanical mixer with First class bricks (min. 10.5 Mpa) in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 & 1300 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering.
In cement mortar 1:3 (1 cement : 3 coarse sand)
0.44
4480
1948.8
... More
SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.
150 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively
5.0 HP, 3-Ø, (32-52)Mtr, (400-167)LPM
Complete Rate Group-I
8
17725
141804.8
... More
Supply & fixing of PVC threaded casing pipes for Tube well (IS 12818:1992) of 3mtr. Each for depth up to 1200 ft. Plain and strainer Casing CS for Depth upto 400ft.
175mm dia
Complete Rate Group-I
320
661
211712
... More
P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required.
1.5 Sq.mm 3 core flat / Round
Complete Rate Group-1
300
47
14160
... More
SITC of Silent DG Set (As per CPCB norms) complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator shall be self regulated with standard Alternator Protection( Over voltage , over speed & under voltage, under speed warning & shutdown). Engine shall have residential silencer, up to 3 M exhaust piping , electronic / Mechanical governor, Manual & electric Start ,Batteries, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mmCRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet & filled with 100mm thick glass wool(96Kg/m3)/Foam. as per IS 8183 the doors of 100 mm thick and fabricated from 1.6mm CRCA sheet packed with accoustic material, canopy fixed with axial flow fan , All doors/ opening are sealed with neoprene/EPDN gaskets. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 degree centigrade. All controls for operation of DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring & control system, MCCB, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter, Ind.lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level shall be less than 75 dBA at a distance of 1 Mtrs. duly certified by authorised agency etc. complete in all respect of following capacity :
Radiator Cooled & Turbo Charged /AC
62.5 KVA at 0.8 pf 415V 50Hz 3-?
Complete Rate Group-I
1
545400
545400
... More
Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:
Cement Mortar 1:6 ( 1-Cement : 6-Sand).
Complete Rate Group-I
12
2043
24518.4
... More
Supply and fixing of oil / Air break DOL / Star Delta Starter made out of sheet steel powder coated enclosure with single phasing protection, ON / OFF push buttons, etc. complete in all respect suitable for following rating motors.
Fully Automatic Star/ Delta Starter
3.0 HP to 10.0 HP
Complete Rate Group-I
8
3648
29184
... More
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling
earth,compaction of earth, making necessary connection, testing etc. as required of size.
10.0 Sq.mm
2 core
Complete Rate Armoured
2500
109
274000
... More
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling
earth,compaction of earth, making necessary connection, testing etc. as required of size.
16.0 Sq.mm
4 core
Complete Rate Armoured
8600
142
1224640
... More
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling
earth,compaction of earth, making necessary connection, testing etc. as required of size.
185.0 Sq.mm
3.5 core
Complete Rate Armoured
5600
733
4108160
... More
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
25.0 Sq.mm
3.5 core
Complete Rate Armoured
1200
166
199680
... More
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
3.5 x 185.0 sq.mm
Complete Rate
90
316
28440
... More
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
2 x 10.0 sq.mm
Complete Rate
580
44
25520
... More
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
3.5 x 25.0 sq.mm
Complete Rate
42
91
3830.4
... More
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
4 x 16.0 sq.mm
Complete Rate
300
86
25920
... More
P & Laying XLPE insulated IS:7098/II/85 of Group1 and approved make H.T.cable for working voltage 11 K.V.Earthed direct in ground including excavation of 30cmx100cm size trench, 25cm layer of river sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary
connection testing etc.as required of size.
3 core 70.0 Sq.mm
Complete Rate Group 1
500
603
301600
... More
P & Laying XLPE insulated IS:7098/II/85 of Group1 and approved make H.T.cable for working voltage 11 K.V.Earthed direct in ground including excavation of 30cmx100cm size trench, 25cm layer of river sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary
connection testing etc.as required of size.
3 core 185.0 Sq.mm
Complete Rate Group 1
4800
1012
4861440
... More
P & Laying XLPE insulated IS:7098/II/85 of Group1 and approved make H.T.cable for working voltage 33 K.V.Earthed direct in ground including excavation of 30cmx120cm size trench, 25cm layer of river sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary
connection testing etc.as required of size.
3 core 300.0 Sq.mm
Complete Rate Group 1
3000
1988
5966400
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of Group1 and approved make suitable for XLPE insulated 11 KV / 33 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes .
11 KV End Termination Kit Indoor type
3 core 120/150/185/225 Sq.mm
Complete Rate Group 1
39
4000
156000
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of Group1 and approved make suitable for XLPE insulated 11 KV / 33 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes .
11 KV End Termination Kit Outdoor type
3 core 120/150/185/225 Sq.mm
Complete Rate Group 1
26
5200
135200
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of Group1 and approved make suitable for XLPE insulated 11 KV / 33 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes .
11 KV Straight Through Joint Kit
3 core 120/150/185/225 Sq.mm
Complete Rate Group 1
19
12000
228000
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of Group1 and approved make suitable for XLPE insulated 11 KV / 33 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes .
33 KV End Termination Kit Outdoor type
3 core 240/400 Sq.mm
Complete Rate Group 1
10
8085
80851.2
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of Group1 and approved make suitable for XLPE insulated 11 KV / 33 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes .
33 KV Straight Through Joint Kit
3 core 240/400 Sq.mm
Complete Rate Group 1
20
24229
484588.8
... More
Supply and installation of spike of M.S. rod 20mm dia 3.0mtr. long for earthing of (tower/pole) drive into earth by mechnical means sturcture connection the spike with cross arm top hamper PCC pole, lattics tower to earth etc. complete as per technical specification of DISCOM
Complete Rate Group I
94
520
48880
... More
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
8 SWG G.I. ( Hot Dipped ) Wire
Complete Rate group-I
436
7
3139.2
... More
S & Laying following size‘ B ‘ class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required
125 mm dia.
Complete Rate group-I
100
740
74000
... More
Supply and erection of GI stay set as per Discom specification complete with long stay rod with anchor plate including stay clamps turn buckle and G.I stay wire tightened through strain insulator, in cement concrete 1:3:6 including excavation of pit-re-filling etc as reqd.
Stay set of dia 16mm,1.8m long stay rod and anchor plate 300x300x6.4mm
Complete Rate Group 1
4
628
2512
... More
SITC of Cutting back up surface up to 2 Mtr. Depth by digging by Bogi including all layers of crust for laying pipe line etc. and making good to original condition (excluding cost of bitumen)
9500
288
2736000
... More
SITC of 11 KV, 400/630 A, 20kA / 3 sec, Out door, Extensible type Ring main unit (RMU) in suitable RCC foundation with 2 no. Load break switch & 1 no. VCB / SF6 circuit breaker with over load, Earth fault, short circuit relay, copper bus bar, earthing switch, mechanical ON / OFF / Earth indication,
Voltage presence indicator, Ring core protection CT 2.5 VA, 10P10 as per transformer rating, Shunt trip coil, Anti reflex operating handle, right angle boots etc. as required.
Complete Rate Group-I
13
331648
4311424
... More
P/F testing and commissining of kiosk type weather proof distri (a) P/F of 1 No Kanife switch 200 Amp. with U cantrats studs, (b) P/F of 10 No. connecting 63 Amp. MCB group-I (c) P/F of 10 No. connecting strips of 63 Amp. 4 pole. (d) Bakelite sheet 9.0mm thick and size 3x2 feet (e) PVC copper wire of 10sqmm flexible connecting to bus bar t (f) Copper bas bar deuble and D type of size 25x5 sqm. strip. (g) Base plate with provission of cable glands of size 185 sqm. (h) Provision of cable clamps at sides of box.
28
17820
498960
... More
Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , Painting etc. as required.
Complete Rate Group-I
6000
67
403200
... More
Supply and fixing of piller box made of 2 mm thick powder coated CRCA sheet of 415 volts 3 phase 4 wire triple pole and neutral type, complete in all respect as required. Including knife switch of 400 amp. rating , HRC fuses with copper one piece U contacts base, brass studs and nuts, copper busbar for main and interconnection, MS angle frame of 50 x 50 x 6 mm grouted with C.C. of M-10 grade to achieve the height of 1.5 feet above the road level suitable for four outgoing.
Complete Rate Group 1
5
34000
170000
... More
Providing and fixing of single pole mounted structure set for isolator as per Discom specification complete in all respect with nuts and bolts as required MS flat 50 x 6mm, MS angle 65 x 65 x6mm, MS channel 100 x 50 x 6mm. ( Excluding cost of pole ).
Complete Rate Group 1
1
1908
1908
... More
Supply and fixing double pole structure for 11/0.4 Kv substation as per Discom specification complete in all respect as required including nuts and bolts etc (excluding the cost of poles) made of MS channel of 4 nos 100 x 50 x 6mm and 4 nos 75 x 40 x 6mm and MS flat 50 x 6mm as per Discom specifications.
Complete Rate Group 1
1
7656
7656
... More
Dismentling/Removing of power line materials collecting from site and depositing the same with AEN office/ store. Refilling pits in compaction, leveling etc. GI wire, stay wire etc. shall be bounded in the shape of coils, if any material is damaged during Dismentling/ transportation replacing/repairing shall be on the part of contractor
L.T. Cable above 35Sqmm
300
31
9300
... More
Dismentling/Removing of power line materials collecting from site and depositing the same with AEN office/ store. Refilling pits in compaction, leveling etc. GI wire, stay wire etc. shall be bounded in the shape of coils, if any material is damaged during Dismentling/ transportation replacing/repairing shall be on the part of contractor
PCC Pole
10
155
1550
... More
Dismentling/Removing of power line materials collecting from site and depositing the same with AEN office/ store. Refilling pits in compaction, leveling etc. GI wire, stay wire etc. shall be bounded in the shape of coils, if any material is damaged during Dismentling/ transportation replacing/repairing shall be on the part of contractor
ACSR Dog conductor
900
1
900
... More
Dismentling/Removing of power line materials collecting from site and depositing the same with AEN office/ store. Refilling pits in compaction, leveling etc. GI wire, stay wire etc. shall be bounded in the shape of coils, if any material is damaged during Dismentling/ transportation replacing/repairing shall be on the part of contractor
Other steel items
200
1
250
... More
Dismentling/Removing of power line materials collecting from site and depositing the same with AEN office/ store. Refilling pits in compaction, leveling etc. GI wire, stay wire etc. shall be bounded in the shape of coils, if any material is damaged during Dismentling/ transportation replacing/repairing shall be on the part of contractor
11KV cross arm
10
12
123
... More
Dismentling/Removing of power line materials collecting from site and depositing the same with AEN office/ store. Refilling pits in compaction, leveling etc. GI wire, stay wire etc. shall be bounded in the shape of coils, if any material is damaged during Dismentling/ transportation replacing/repairing shall be on the part of contractor
11 KV Top Hampars
10
10
100
... More
Dismentling/Removing of power line materials collecting from site and depositing the same with AEN office/ store. Refilling pits in compaction, leveling etc. GI wire, stay wire etc. shall be bounded in the shape of coils, if any material is damaged during Dismentling/ transportation replacing/repairing shall be on the part of contractor
11KV pin insulators
30
3
105
... More
Dismentling/Removing of power line materials collecting from site and depositing the same with AEN office/ store. Refilling pits in compaction, leveling etc. GI wire, stay wire etc. shall be bounded in the shape of coils, if any material is damaged during Dismentling/ transportation replacing/repairing shall be on the part of contractor
LT Pillar Box
9
800
7200
... More
Dismentling/Removing of power line materials collecting from site and depositing the same with AEN office/ store. Refilling pits in compaction, leveling etc. GI wire, stay wire etc. shall be bounded in the shape of coils, if any material is damaged during Dismentling/ transportation replacing/repairing shall be on the part of contractor
11/0 4 KV transformer
5
530
2650
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.
3 x 2.5 sq.mm
Complete Rate Group 1
1800
48
86400
... More
P & F in position frame made out of M.S. angle (riveted or welded) finished with two coats of red oxide and enamel paint including cutting, welding, holes etc.of following sizes as required.
50mm x 50mm x 6mm
Complete Rate Group 1
60
250
15024
... More
P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.
Single pole MCB
6 A to 32 A rating
Complete Rate Group 1
170
120
20536
... More
P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nut and bolts as required.
6.4 mm thick
Complete Rate Group 1
5
712
3564
... More
SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from
CPRI approved fabricator)
Complete Rate Group 1
50
2201
110080
... More
Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves.
Electrolytic grade Aluminium bus bar
Complete Rate Group 1
10
336
3360
... More
SF of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required.
Red/yellow/Green colour
Complete Rate Group 1
16
120
1920
... More
P & F of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of mechanical interlocking, auuxilary contacts, Din rail mounting type including making connections, testing etc. as required.
4 pole Power contactors with following AC 1 Rating
100 Amp
Complete Rate Group 1
5
4595
22976
... More
SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having
positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required.
With Thermal Magnetic release up to 100 Amp , 16 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
Complete Rate Group 1
5
4640
23200
... More
SITC of quick make and quick break 3 pole current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push ( test ) to trip, including making connections with lugs & spreaders, etc. as required.
With Thermal Magnetic release up to 100 Amp , 16 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
Complete Rate Group 1
30
3400
102000
... More
P&F of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and AC1 rating of 16-20 amperes including making connection, programming etc. as required
One day & week reserve (digital type )
Complete Rate Group 1
4
4596
18387.2
... More
Supply and erection of GI Octagonal / Conical pole of following length and dimension as per table E-10 with base plate on the cement concrete foundation of M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS: 1367 P III ). The pole shall have a weatherproof flush door and locking
arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning.
Octagonal MS Poles made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. (See Table E - 10 for specs.)
8 Mtr.
Complete Rate Group 1
170
9840
1672800
... More
P & F of IP 65 protected LED Street Light Luminaire on existing brackets. Fixture made of powder coated single piece pressure die cast aluminium housing with heat dissipation fins on housing with UV stablized PC/ Toughened glass cover and lens/ reflector. Input power (including driver loss) range from 20-25W/30-40W/80-90W/ 110-120W with luminous Efficacy 80 Lumen/W (warm white) & 85 lumen/W (cool white) (As per LM79). LEDs of Cree/Nichia/OSram/Philips make is to be used at 1W/2W per LED, CRI 70 and CCT 2700 K - 6500K. The integral SMPS based electronic driver must have efficiency 85%, Power factor 0.95, THD 20% and input Voltage range of 90-270 VAC at 50 Hz. System life of 25000 Burning
Hours with 70% of initial Lumens maintained. Fixtures must be in compliance with IS/CE Standards. Approved make : Philips, Bajaj, Surya
IP - 65 Protected LED Street Light Luminaire
LED Street Light fixture 110-120 Watt
Complete Group-1
260
18920
4919200
... More
P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia.
90 / 76 mm
Complete Rate
3000
120
360000
... More
P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia.
160 / 136 mm
Complete Rate
2000
236
472000
... More
Supply, Erection and Fixing of hot dipped galvanised Overhang (48.3 X 3.25 mm) with cap (400 x 88.9 / 114.3 x 3.25 mm) over the existing poles
Single arm overhang
Complete Rate Group 1
325
712
231400
... More
S & F of Street light bracket made out from following size of ‘ B ‘ class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.
32 mm Dia.
Complete Rate Group 1
70
328
22960
... More
SITC of high mast lighting system (as per CP3-TR7/1996 of ILE, UK) consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm, mast head frame assembly with full cover, aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, suitable ropes (AISI 316, 7 / 19 costruction ), EPR insulated PCP sheathed trailing cable, outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required. The mast is constructed
from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. ( See table E - 13 for specs.)
16.0 Mtr HM (in 2 section)
Complete Rate Group 1
2
212000
424000
... More
P & F of IP 65 protected LED Flood Light Luminaire made of single piece powder coated pressure die cast/Extruded Aluminium housing with heat dissipation fins on housing, Toughened glass cover with suitable lens on LEDs to achieve various beam angles. Input power (including driver loss) not more than 40W/60W/ 90W/120W/160W with luminous Efficacy 80 Lumen/W (WARM WHITE) & 85 Lumens / w (cool white) (As per LM79). Appropriate beam angle lens 45?/60?/80?/70?x140? (High Mast) to be used as per requirement. LEDs of Cree/Nichia/Osram/Philips make is to be used at 1W/2W, CRI 70 and CCT 2700 K - 6500K. The integral SMPS based electronic driver must have efficiency 85%, Power factor 0.95, THD 20% and input Voltage range of 90-270 VAC at 50 Hz. System life of 25000 Burning Hours with 70% of initial Lumens maintained. Fixtures must be in compliance with IS/CE Standards. Approved make : Philips, Bajaj.
High Power LED Flood Light 160W
Complete Group-1
74
21120
1562880
... More
Supply & Erection of lattice structure of height 12.8 mtr in alignment, including excavation of pit and Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement, river sand and 12 mm to 20 graded blast crusher broken in pit/ found cement plaster upto 0.50mtr. from top to bottom in 1:3:6 ratio and paint of tower of approved make two coat of red oxide paint and one coat of aluminium paint before installation and one coat of paint after irrection work completed as per technical specifications & drawing of DISCOM.
Complete Rate Group 1
4
33800
135200
... More
Add extra over item of Composite Steel Girder (RUIDP SOR item no. 14.16)) for using IS: 2062 Grade 350(B) grade steel instead of IS: 2062 Grade 250(B)
300000
6
1800000
... More
Launching of railway's relieving girder of overall length upto 12 to 22 metre after removing track, ballast, excavation earth on properly prepared wooden / cc/ steel cribs supports as per the approved scheme of launching, Railway drawing and specifications, by contractor's own tools, plants, machineries, labour, equipments etc. The work includes fixing of track i.e. wooden/Steel channel sleepers, rails & fittings as per railway specifications and standards on the relieving girder and necessary adjustments in the longitudinal and cross levels including lifing & packing at approaches of girders after insertion of the relieving girder in track to maintain safety of trains on the relieving girder and its approaches. Note:- (1) R H Girders, sleepers, rails & fittings will be provided by railway. (2) Rates are inclusive for preparation of Railways wooden/ CC/ steel crib support for placing/ Launching of girder with contractors own tools, plants, materials, machinery, labour, equipment etc. as directed by engineer incharge. (3) Rates are inclusive of raising of track if any before launching of relieving girder at the location of subway and meeting the approaches on either side in suitable gradient with in block period.
60
6200
372000
... More
Delaunching of Railway's 12 to 22 m long reliving girder from bridges and stacking at suitable location as per direction of engineer in charge, with contractor's labour, trailer, cranes, derricks, tools and plants, equipments, consumables etc. complete as per specifications, special conditions and detailed scope of work furnished in the tender and as directed by the Engineer in charge. Note: - The rate shall be inclusive of dismantling of track fixed on girder with fitting & dismantling of sleeper crib assembly with fitings & stacking at suitable place as directed by engineer incharge.
60
3100
186000
... More
Removal of BG track assembly of required length, during traffic block in straight/ curve laid on LWR/ SWR/single rail with 60Kg/52Kg rails on PSC sleepers with spacing upto 1660 sleeper per KM density with the help of contractor's road crane including cutting of rails with abrasive disc cutter & drilling of holes along with chamfering wherever required, leading and stacking them near site without damaging the BG track assembly with contractor labour, tools, plants, equipments etc. including handling, re-handling, crossing of track, Nallahs and any other obstructions without disturbing center line and level pegs as per direction of site engineer in charge.
45
4000
180000
... More
Insertion of already assembled BG track in existing track alignment during traffic block or otherwise with the help of contractor's road crane over bank or as directed by Engineer in charge at site in straight/curve, including cutting of rails with abrasive disc cutter & drilling of holes along with chamfering wherever required, squaring of sleepers, ensuring correct sleeper spacing,gauge, alignment, longitudinal and cross levels including removing of kinks of rails including one katcha packing to bring the track to good geometry as per IRPWM fit for 20 kmph including tightening/ recouping of all sleeper's fittings and fastening etc. as a complete job with contractor's labour, tools, plants, equipments etc. including handling, re-handling, crossing of track, Nallahs and any other obstructions as per site condiiton and direction of site engineer in charge. The rate shall include preparation of formation for laying of track including leveling & grading and nothing extra will be paid on this account
45
4000
180000
... More
"Design and casting of precast single/twin RCC box with or without common web section including thrust bed for RUB/ROB/Canal works with weigh batching/using RMC of Specified grade controlled concrete and pushing in correct position and alignment below Railway track/Road by jacking by 'Box pushing technique"" as per approved drawing for vent way of any size with or without surcharge in all types of soils including shoring/strutting whenever required and disposal of surplus earth away from vent way upto a maximum lead of 1 Km including de-watering if required, under traffic conditions of Electrified/Non-Electrified sections, fixing of drag sheets, wearing coat as per approved drawing of M 20 Grade or above concrete, including footpaths/cable ducts with kerbs/crash barriers if required, parapet walls on both sides, including cast in-situ plaques for inscribing particulars of bridge foundation of size 450X450X50mm on bridge abutments/returns, casting of bridge number plaques in situ of overall size 750X720X400mm, drainage arrangements in box portion as per approved drawing/scheme, provision of cutting edges, providing and fixing electrical conduit pipes, junction boxes of approved dimension and quality, all fittings wherever required,mobilization operations, generator of required capacity for power supply, lighting, arrangements, other safety measures like protection of track/road traffic etc., during execution of work if required, with all contractors material, cement, Ready Mixed Concrete (if required), reinforcement steel, structural steel, shuttering, labour, tools and plants, machinery, and any other material required for execution of work in all respect with all lead and lift, transportation and as directed by Engineer in-charge. Note: (1) The rate includes all items of work/supplies for complete job in all respects except cost of Reinforced cement concrete, cement, reinforcement & shuttering of (i) main RCC Box and (ii) Thrust Bed only which shall be paid extra under relevant item of USSOR. (2) If soft rock ·or hard rock is encountered in place of soil,difference between the respective rates of excavation for quantity of soft rock or hard rock and soil shall be paid extra under relevent items"
514.95
10874
5600045.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%