Jaipur Development Authority Tender

Removing and Refixing of Pre cast Kerb stone obtained from site and fixing at as per direction of engineer-in-charge over 100 mm thick C.C. 1:4:8 and jointing of kerbs with cement morter 1:4 including cost of loading unloading transporting and curing complete in all respect as per direction of Engineer-in-charge.

Supply & fixing of M-20 grade precast cement concrete Kerb or Dand upto 60 cm length over 20 mm thick base of cement mortar 1:6 including jointing earth work, painting & jointing with cement mortar 1:4 of size (20 x 25) / 2 x 30 cm

SAND STONE FLOORING Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color: Grey cement natural colour 4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm 6) Abrasion: As per BS: 6717:2001

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRD specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6

Earth, Sand, Lime, Morrum manure or sludge For 20 Km.

Making Gola garden kangoora and ornamental lining work as per approved Jaipur style pattern on wall surface etc including all material, scaffolding, T&P etc

Providing and fixing SOLAR DELINATOR made of ms pipe of 48/63 mm, dia upper top of iron cage 1 Meter Pole Energy: green led warning strobe light 3.2 Volt 600 mAh Illumination: 4 High Intensity Super Bright LEDs Cover Material: PC Function: flash- stable -close 6 Hour Sun Charged: Operates 60 Hours (Flash Mode) Photocontrol: Automatic on at Dusk; Off at Dawn IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification. The delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, dia of ms pipe 48/63 MM DIA and shall extend not more than 50 mm below the ground while being installed

Painting work in single colour with (Red/White drawing flowers, and leaves, bail, buta) with exterior paint upto 3 ft height including of all materials etc as per direction of engineer incharge

PAINTING Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Building Rubbish Stone metal (Grit and ballast etc.) For 20 Km.

Rubbing and Cleaning work on existing sandstone work including all cutting , treatments cleaning with soap stone blades and application of non erosive soluble compounds without disturbing any existing carving complete in all respect including scaffholding and as per the directions of enginner in charge

CEMENT PLASTER Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick.