Indira Gandhi Nahar Project Tender

Design, Drawing, fabrication, supply, erection, testing and commissioning of Vertical lift sliding type gate with frame consisting of skin plate, sealing frame, stiffeners, horizontal and vertical girders, guide, stainless steel flat/Brass flat, rivets, wedges, lifting rods etc., with all accessories as per relevant IS code including frame & gate complete set for Canal Cross, Escape, Head regulator /Tank head regulator including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, seal fixing, tools and tackles etc., applying two coat of zinc rich epoxy primer to give dry film thickness of 70+/-5 microns and finish coat (two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150+/-5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials. Desc / Location: X- REGULATOR GATE 2 NOS. AND HEAD REGULATOR GATE 1 NOS. AT SBS

Supply of water seal musical hollow knot type for canal gate having size 125x12x45 mm as per IS 11855 specification. Desc / Location: FOR X-REGULATOR GATE 2 NOS. RD 1458 AND HEAD REGULATOR GATE SBS 1 NO.

Supply of water seal Flat type for canal gate having size 100x12 mm as per IS 11855 specification. Desc / Location: FOR X-REGULATOR GATE 2 NOS. RD 1458 AND HEAD REGULATOR GATE SBS 1 NO.