Indira Gandhi Nahar Project Tender

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finish :20 mm thick.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sadal/loi. (Only for colour changing only.)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :One or more coats on Old Work.

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete.

Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead :Of area 3 square meter and below.

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200 mm × 300 mm in walls, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Providing and fixing 1st quality MAT finished ceramic tile size 300×300 mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).

Providing and fixing external grade board solid core single/ Double leaf flush door shutters IS: 2202 (Part-II)1996 marked using Phenol formal dehyderesin in glue both sides with approved stainless steel fittings complete as per annexure A :35 mm thick :Commercial Veneer both side.

P & F Toilet Paper Holder with rod of approved quality/make :C.P. brass heavy & Superior quality

P & F lst quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc. complete.WVC Flat Back size 430×260×350 mm./ Wall corner 340×410×265 type liped front.

Providing and fixing Superior quality CP Brass fittings of approved make complete as per direction of EI :Pillar Cock 15 mm nominal size.

Providing and fixing Superior quality CP Brass fittings of approved make complete as per direction of EI :Two way Bib Cock 15 mm nominal size.

Providing and fixing Superior quality CP Brass fittings of approved make complete as per direction of EI :Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete.

Providing and fixing Superior quality CP Brass fittings of approved make complete as per direction of EI :600 mm long towel rail.

Providing and fixing Superior quality CP Brass fittings of approved make complete as per direction of EI :Soap dish.

P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. :C.P. Inlet connection 15 mm Brass (IS : 8931 marked).

Renewal of old putty of glass panes (length).

Renewing glass panes with wooden fillets wherever necessary : 4mm thick plain glass panes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Coupler 75 mm dia.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Double Tee with Door 75 mm dia.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single Bend w/o Door 87.5° 75 mm dia.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes :Type A 75 mm diameter

020501 Short point (up to 3 mtr.)020501.2 Group 1

020701 On board020701.2 Group 1

072200 P & F socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc. as required. 072200.2 Group - 1

060221 30 A / 40 A rating060221.4 Group 3

040500 Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required.040500.2 Group 1

12.5 Providing & Fixing of IP20 SMD Mid Power LED batten typeintegrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , Power Consumption of 18W/20W ,system lumen efficacy is greater than equal to 120 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD is less than 10% ,p.f. is greater than equal to 0.95, CRI is greater than 80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000 Degree K / 4000 Degree K / 5700 Degree K/6000 Degree K/6500 Degree K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure A attacheded with this BSR.4 12.5.1 LED Tube shape fixture 18/20 W (polycarbonate Base) CH E17 E170201

Providing & Fixing of IP40 LED Surface/ Recessed / suspendedmounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency is greater than 85% , with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of is greater than equal to 120 lm/Watt ,THD is less than 10 % , p.f. is greater than equal to 0.95,CRI greater than 80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000 Degree K / 4000Degree K / 5700 Degree K /6000 Degree K/6500 Degree K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure A attacheded with this BSR. Recessed mounting 36 Watt LED light fixture 2 feet X 2 feet with acrylic / prismatic front cover CH E17 item E170911

171300 P & F of capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required.171301 400 mm sweep(Oscillating type)171301.2 Group - 1

040101 1 x 1.5 sq.mm040101.2 Group 1