Medical Health And Family Welfare Department Tender

Dismantling of flooring with care including stacking of serviceable material and disposal of unserviceable material with in 50 mtr. Lead for :Lime concrete flooring upto 15cm thick

Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height.In flats, tees, angles and channels.

Providing and fixing of precast concrete interlocking blocks of M 30 grade 80mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks:Add extra over item no. 11.57.1 for 80 mm thick blocks

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size).

Providing and fixing 1st quality standard White / Ivory Glazed Tiles ISI marked [IS : 13753] of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).Catgory-I : Kajaria, Johnson, Somani make etc.

Providing and fixing 1st quality MAT finished ceremic tile size 300 x 300 mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile of Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of the complete (excluding the cost of cement plaster). Add extra over item No. 7.3, 7.4 & 7.5 for using Joint Free Tiles size above 300 x 300 mm

Providing and fixing factory made polyvinyl chloride (PVC) Door frame manufactured by M/s Rajshri of the size 50x47mm with a wall thickness of 5mm made out of extruded 5mm, made out of extruded 5mm PVC foam sheet, mitre cut at two corners and jointing with 2 nos. of 150mm long brackets of 15x15mm M.S. Square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. square tube of 19gauge, EPDM rubber gasket weather seal to be providing through out the frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasterners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum 2 nos. for horizontal member etc. complete as per manufacture specifications and direction of Engineer- in-charge.

Providing and 30mm thick Rajshri Brand factory made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sizes of 19mm for styles & 15mm x 15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame shall be covered with 5mm thick heat moulded "Rajshri" PVC 'C' Channel of size 30x50mm forming styles and 5mm thick, 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side & 10mm (5mmx2) thick, 20mm wide cross sheets as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rail with 30mm wide x 5mm thick PVC sheet beading on either side the jointed together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacture's specification & drawing (For W.C. & Bathroom shutters). including all door fittings such as Hinges, L-drop, Handles, Locking bolts etc. as per approved of Engineer-in-charge

Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint : M.S. Sheet 22 S.W.G

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil.

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 cm thick wall in : Cement Mortar 1 : 6 (1-Cement : 6-Sand).

Random rubble dry stone Kharanja under floor.

Providing & laying Chequerred terrazo tiles of approved make 22 mm thick with marble chips of size upto 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28 mm thick bed of CM 1 : 4 : Dark shade using ordinary cement.

25mm thick fine dressed and machine grinded surface stone flooring over 20mm (Av.) thick base in cement in CM 1:6 with joints finished flush with:Red sand stone.

Repair to cement plaster in cement mortar 1 : 6 (1 cement : 6 fine sand) including removal of old plaster in regular shape and white or colour washing

P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked) grade-I Black for EWC.

P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.

P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231PVC with PVC bend as per IS : 7231

P & F bib cock (IS: 8931 mark) superior quality of approved make C.P. Brass bib cock, 15 mm nominal bore

Providing and fixing Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make.C.P. brass concealed half turn 25 mm nominal bore

Providing and fixing Indian Type white glazed vitreous china 1st quality W.C. Orissa pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor.Size 530 x 410 mm

P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor

Providing and fixing Full -way Valve (IS : 778 Mark) or wheel valve of approved make.

Gun Metal 15 mm nominal bore

Gun Metal 25 mm nominal bore

Providing and fixing Inlet Connection (Angle, Valves) Superior quality, of approved make.for wash basin Gyser etc. C.P. Inlet connection 15 mm.Brass (IS: 8931 marked)

Providing and fixing Polyethylene - Aluminimum - Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply with all compression type composite internal seal fittings (e.g. elbows, tees, reducers, couplers connectors etc.) including trenching & refilling the same etc. (External work)

1216 (16mm OD) pipe

2025 (25mm OD) pipe

Providing and fixing PVC Storage tank confirming to IS : (12701 marked indicating the BIS license No) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. Long wash out pipe with plug & socket, including making connection etc. complete of approved design. 500 Litres capacity

Hoisting Charges for each floor.

P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Mini stall size 455x385x350mm.

P & F WVC Wash Basin (1st quality IS : 2556 mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P.Pillar cock (IS : 8934 mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 450 mm x 300 mm

P& F waste Pipe with all fitting, P.V.C with PVC nut 32 mm

P & F Grating of approved quality/make: Stainless Steel Sheet size 125mm dia.