Ground Water Department Tender

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: One or more coats on old work.

Providing and applying white cement based putty over plasteres surface to prepare the surface even and smooth complete

Providing and fixing IS:3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc, complete.

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 :1992 Marked ) of approved quality /make (i) 110mm dia

(ii) 75mm dia

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings Type B for sciland waste discharge system (IS:13592 :1992 Marked ) of approved quality /make Bend 87.5 Dg. 110 mm dia Bend 87.5 Dg. 110 mm dia

WC connector 110mm dia

Nahni trap with jali 4" 110mm dia

Providing and laying in position cement concrete including curing , compaction etc. complete in specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:4:8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Cement concreate flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc. complete but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20mm thick nominal size aggregate

Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mmx 6.0 mm and opening of size 102mm x 99 mm to aluminum window/ vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Powder coating Aluminium (minimum thickness of powder coating 50 micron)

Colour washing of all shades to give an even shade including all scaffolding Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/ loi. ( only for colour changing)

P & F Ist quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc. in different sizes (thickness minimum 10mm) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc. complete. Size 600 mm x 600 mm.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item with float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) as per IS:2835

Providing and fixing 1st quality MAT finished ceremic tile size 300X300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. Laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS: 13753 & IS: 15622 of size 200mm X 300mm in walls, floors, steps, pillars etc. Laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the complete (excluding the cost of cement plaster on walls and pillars).

P & F indian type white glazed vitreous china 1st quality W.C. Orissa pan (IS: 2556 Mark) with 100mm viterous china P or S trap including cutting and making good the wall and floor: Size 580X440 mm.

Providing and fixing aluminum work for doors, windows, ventilators and partition with extruded buit up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap. at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling, C.P. brass/stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer in-charge. (Glazing and paneling to be paid for separately). For fixed portion (i) Powder coating Aluminium (minimum thickness of powder coating 50 micron)

(ii) For shutters buitup standard tubular sections of openable doors, windows & ventilators including providing and fixing hinges/ rollers etc and making provision for fixing of fittings wherever required. (lockes shall be paid for separately). Powder coating Aluminium (minimum thickness of powder coating 50 micron)

wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding. Two or more coats on new work including prepration of base with primer, putty, lippy etc complete in all respect.

Dismantling tile work in floors and rots laid in cement mortar including stacking of serviceable material and disposal of unserviceabe material within 50 meter lead: For thickness of tiles 10mm to 25mm.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping surface and priming coat with cement primer.

Providing and fixing vertical Blinds, headrails shall be oriented aluminium alloy 50 mm vide x 18 mm high the thickness shall be made of high grade polymer and shall be housed in side the headrail, which shall transfer motion from chain tilter to tilt road. chain tilter shall be made of plastic bead of diameter 4.5 mm through which 2 mm thick polyster code passes. Tilt rod shall be extruded aluminium having 3 key ways. Runner shall be moulded plastic and shall have to plastic wheels mounted on plastic exles to enable runner to slide unhindered in headrail. Luver shall be made of fabric 100 mm colour fast and shall have protective scotchgard coating to resist stains and dust. bottom mechanism consist bottom weight made of powder coated galvanizes steel for maximum corrosion resistance. the bottom weight shall be attached with bottom.

P&F WVC wash basin (1st quality IS:2556 Mark) of approved make with C.I. Brackets duly painted, 1 No. 15mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. Brass waste coupling of approved make, 25 mm G.I. Waste pipe complete including cutting & making good the wall: Size 510 mm X400 mm

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead:

P & F inlet connection (Angle Valves) Superior quality, of approved make for wash basin, Gyser etc. C.P. Inlet connection 15mm brass (IS : 8931 marked)

P & F jet spray for water closet with C.P. Copper tube flange of approved make.

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish: 20mm thick.

Providing and laying in position cement concrete including curing , compaction etc. complete in specified grade excluding the cost of centering and shuttering- All work up to plinth level. M 10 grade Nominal Mix 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

P & F Looking mirrors with P.V.C. Frame of approved make as per direction of engineer-in-charge Size 500 mm X400 mm

P & F towel rail or ring of approved quality/make: C.P. Brass towel rail with brackets 600X20mm

P & F bib cock (IS:8931 Mark) superior quality of approved make: C.p. Brass bib cock, 15mm nominal bore.

P & F PVC Storage Tank ISI marked (IS:12701) indicating the BIS license No.) of approved make with cover, 25mm diia 1M long G.I. Over-flow pipe & 25 cm. Long wash out pipe with plug & socket, including making connection etc. Complete of approved design: 750 litre capacity

Providing and fixing Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes as per 15450 :2004 U.V. Stablised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80 oC including all special fittings of composite material (engineering plastic blend and brass inserts whenever required) e.g. elbows, tees, reducers, couplers connectors etc. with clamps at 1.00 metre spacing. this include the cost of cutting chases and including testing of joints complete as per engineer in charge.Internal work-Exposed on wall (i) 1620 (20mm OD) pipe

(ii) 2025 (25mm OD) pipe

Providing and fixing 14 mm thick Acoustical with fine fissured tiles/Mineral fibre high density tiles with butt edges false ceiling tiles of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanized @ 170 gsm/sqm.) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of lenght 600 mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x030 mm and laying false c3eiling tiles of approved textrue in the grid including, whereverm requried, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke delectors etc. main "T" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge. (The tiles hould of 90% RH avg. NCR 0.55 light reflectance. 80% thermal conductiveity K = 0.052-02057 w/m k colour white. Fire performance class 0/classI(BS 476) with warranty against sag

Providing and fixing wall paneling using soft wood frame of size 50x25mm @ 600mm c/c in both direction duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using : 12mm thick one side laminated board Practical board ( Phenol bonded)

PART - B : ELECTRICAL WORKS Wiring of Twin control light with 1.50 sq.mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq.mm. nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kv grade (IS : 694) of approved make in surface / recessed ISI marked medium duty PVC conduit & its accessories, round tiles, Hot dipped Galvanized M.S. modular box of 20 SWG with earth terminal terminal, 6 A two way Modular switch, modular plate with grid plate, screws, making connections, testing etc. as required. (i) Short point (up to 3 mtr) Gr. 1

(ii) Medium point (up to 6 mtr.) Gr. 1

(iii) Long point (up to 10 mtr) Gr.1

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required Gr. 1 (i) 2 x 2.5 sq.mm. + 1x1.50 sq.mm Gr. I

(ii)2x4.0 sq.mm.+1x2.5 sq.mm.

P&F Recessed/Surface mounting heavy duty horizontal type sheet steel Distribution board phosphatised/powder painted complete with suitable rating copper bus bar, shorting link, neutral link, earth link and din bar,masking sheet, conforming to IS 13032 & IS 8623 including making internal DB terminations with copper lugs, testing etc. as required (i) Double door(Three phase) 6 way Gr-1

Supplying and fixing of power plug point Modular accessories on Hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet making connection, testing, etc. as required Gr. 1

P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required

P & F ISI marked 6 amp surface bakelite batten/ angle holder including making connection testing etc. as required

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828 (1996)/conforming to IEC 60898 in existing board/sheets including making connections , testing etc. as required. (i) Single Pole MCB 6 A to 32 A rating Gr. 1

P & F of IP 20 LED Recessed/ surface mounted, Round / Square Non dimmable downlight die- cast aluminium housing & Heat sink for heat dissipation, high purity reflector wth external driver having efficiency 85 % and in compliance to IEC standards. Power Consumption of = 7w/ 10w/ 15w / 18w with ~ 500 / 750 / 1100 / 1250 lumens, system lumen efficacy of 70 lm/ watt output suitable to replace 1 x 18 w / 2 x 18w / 2 x 26w CFL Downlight, life time of 50000 Burning hours with 70 % of initial lumen maintaned. CCT 30000 k, 40000 k & 60000 k fixture shall be CE compliance LED downlight 9 / 10 w Gr.1 Recessed Mounting

S & F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required (i) 25 mm dia

(ii) 20 mm dia

P & F capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the helps of anchor bolts including making connection testing etc. as required. 400 mm sweep (oscillating types)

P & F Fluorscent tube rod in existing fixture as required. Flourscent powder coated (Minimum 3 star rating) 36/40 watts

P&F 240/415 V isolator conforming to IS: 13947-lll/IEC 60947-3 on existing board/sheet including making connections , testing etc. as required. Four pole Isolater 63 A rating

Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm. nominal size FR PVC insulated unsheatehed flexible copper earth conductor 1.1 kv grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit & it's accessories, hot dipped Galvanized M.S. modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. (i) on Board

P & F strip type flourescent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint)/(extruded non corrosive UV resist EP channel) complete with accessories (Low loss Copper Choke,starter, starter seat)/Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube) 1 x 36 Watts with OCCB

P&F of IP20 LED ceiling / recessed / suspended mounting light fixture made from CRCA sheet steel housing, hight purity / transmisivity diffuser for uniform light distribution. High efficiency driver electronics having efficiency 85% and in compliance to IEC standards (Integral with light fixture). Power Consumption of 40W / 50W / 60W~ 3000/3300/4200 lumens, System lumen efficacy of 70 - 80 lm/Watt output suitable for 2x36WFTL / 2x36W CEL light fixtures, life time of 50000 burning hours with 70% initial lumens maintained. CCT 30000 K, 40000K & 60000 K. Fixtures shall be CE compliance. Recess Mounting 36W LED light fixture 2'x2' with acrylic / prismatric front cover.

SITC of air Cooled split type Air conditioner complete with indoor (IDU), outdoor unit(ODU) with stand surface/conceeled copper refrigerant piping with insulation(EP Foam pipe section) upto 3mtr. (IDU to ODU) copper power cable upto 4 mtr(IDU TO ODU) are 22 refrigerant remote suitable for 400/230v +10% off 50Hz 1/3 phasde AC supply capable of performing cooling dehumidification, air circulation of following capacity with scroll/ reciprocating/ rotary compressor as specified: hi Wall/Ceiling Wall split 1.5 TR with 5 star rating of BEE