GAIL India Limited Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 1,86,467Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_GAIL_213518_1Tender No
GAIL/CNP/JPR24SM182/2024-25Tender Authority
GAIL India Limited ViewPurchaser Address
-Website
http://etenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
The Scope of work for surface dressing includes complete removal of trees/vegetation/herbs/algae/waste etc. to prepare the surface /ground for proper work/PCC/RCC. All the waste/ scrap/ unusable materials are to be disposed off beyond 2 KM from Gail site. Any tools, tackles, material, labour, etc. required are included in this SOR
500
-
16890
Scope of work includes supply and laying of position cement concrete/RCC of specified grade in ratio of
1:2:4 or 1:1.5:3 or any other specified mix by EIC (1 cement : 2/1.5 coarse sand : 4/3 graded stone
aggregate 20 mm nominal size) below and upto plinth levels and above plinth levels upto 5th floor.
The scope also include proper compaction of loose soil prior to the laying of concrete with proper shape
and size as per drawing details or/and as directed by the EIC/SIC/Site engineer. Disposal of scrap
/unusable material beyond 2 KM from GAIL Site shall also be in the scope of this SOR. Any tools,
tackles, material, labour, etc. required are included in this SOR. The cost of centring and shuttering is not
included in this item
20
-
176763.6
Scope of work includes supply and laying of position cement concrete of specified grade in ratio of 1:3:6
or 1:4:8 or as specified by the EIC (1 cement : 3/4 coarse sand : 6/8 graded stone aggregate 40
mm nominal size) below and upto plinth levels and above plinth levels upto 5th floor. The scope also
include proper compaction of loose soil prior to the laying of PCC with proper shape and size as per
drawing details or/and as directed by the EIC/SIC/Site engineer. Disposal of scrap /unusable material
beyond 2 KM from GAIL Site shall also be in the scope of this SOR. Any tools, tackles, material, labour,
etc. required are included in this SOR. The cost of centring and shuttering is not included in this item.
15
-
113868.9
The scope includes Providing Centering and shuttering including strutting, propping, bracers, etc. and removal of form for :Suspended floors, roofs, landings, balconies and access, platform, Shelves (Cast in situ),ground, Foundations footings, bases of Columns etc. at all levels as directed by EIC/SIC/Site Engineer. Shuttering oil must be used on shuttering material during casting work. Any tools, tackles, material, labour, etc. required are included in this SOR.
20
-
7390.8
BRICK WORK IN Foundation & superstructure : Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :With Modular bricks. Bricks shall be free from cracks and flaws and nodules of free lime. Bricks shall have smooth rectangular faces with sharp corners. Bricks shall be uniform in colour. The Scope also includes cost of transportation of the bricks from manufacturer to the GAIL Site.
10
-
93775.8
The scope includes Providing and laying "Half brick masonry with bricks of class designation 75 or better in foundation and plinth & superstructure in Cement mortar 1:4 (1 cement: 4 coarse sand)" FPS non modular bricks. Bricks shall be free from cracks and flaws and nodules of free lime. Bricks shall have smooth rectangular faces with sharp corners. Bricks shall be uniform in colour. The Scope also includes cost of transportation of the bricks from manufacturer to the GAIL Site.
20
-
24435.6
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings. The scope includes Providing and fixing of Granite/Stone as directed by EIC/SIC/Site engineer which shall be minimum 18 mm thick gang saw cut, mirror polished, remoulded and prepolished ,machine cut for platform, window sills ,facias and similar locations of required size, shade , colour & texture as approved by EIC/SIC/Site Engineer, Joints treated with white cement with the matching pigment , epoxy touch-ups, including rubbing ,curing, moulding & polishing to edges to give high gloss finish etc. complete at all levels, including mortar bed 1:4 in required thickness as per site. Any tools, tackles, material, labour, etc. required are included in this SOR. Further, if required at site for the moulding/buffing/ polishing, same shall be done as per EIC/SIC/Site Engineer directions without any additional cost implication. Flamed finish granite stone slab of colour South black, Rajasthan Black, Jet Black, Cherry Red, Elite Brown, Cat Eye etc as approved by EIC/SIC/Site Site Engineer .
50
-
155394
The scope includes Providing and fixing of Marble as directed by EIC/SIC/Site engineer which shall be minimum 18 mm thick gang saw cut, mirror polished, remoulded and prepolished ,machine cut for platform, window sills ,facias and similar locations of required size, shade , colour & texture as approved by EIC/SIC/Site Engineer, Joints treated with white cement with the matching pigment , epoxy touch-ups, including rubbing ,curing, moulding & polishing to edges to give high gloss finish etc. complete at all levels, including mortar bed 1:4 in required thickness as per site. Any tools, tackles, material, labour, etc. required are included in this SOR. Further, if required at site for the moulding/buffing/polishing, same shall be done as per EIC/SIC/Site Engineer directions without any additional cost implication. Makrana white marble, RajNagar Plain white marble, Udaipur green marble, Zebra Black marble, Ambaji White marble as directed by the EIC/SIC/Site Engineer.
5
-
15836.7
Providing wood work in frames : Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs orwith dash fasteners of required dia & length . Sal wood, teak wood, Mahogany, Sagwan as directed by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR
0.5
-
64032.51
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding qualityconforming to IS : 2046 Type S, including cost of adhesive of approved quality. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR 1 mm thick.
5
-
4584
CUP BOARD SHUTTER : Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, sliding channel etc all complete as per direction of the Engineer-in-Charge. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR
20
-
47584.8
Providing and fixing wire gauge laminated veneer lumber shutters conformingto IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63mm as per IS :1568, for doors, windows and clerestory windows fixing with butthinges of required size with necessary screws, as per directions of Engineerin-charge: 30 mm thick shutters. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR. The scope includes providing Door shutters with SS Jali (Wire Gauge) as per design approved by EIC/SIC/Site Engineer with handle on both sides, hinges, 2 Latchs, Stopper, Hydraulic Auto closure etc. all necessary accesories as directed by EIC/SIC/Site Engineer
2
-
5826.84
Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.
5
-
7758.3
The Scope of work for Steel Structure includes providing and fixing of Steel Structure various section as per drawing and/or as directed by EIC/SIC/Site Engineer all Complete including straightening, cutting, bending, placing in position, binding, riveting, bolting, welding, hoisting, fixing etc. as per drawing/ directions provided by EIC/SIC/Site engineer. The scope also includes to remove all loose particles for and apply primer to get smooth finish for all steel structure section. Any tools, tackles, material, labour, etc. required are included in this SOR. Approved make of Steel: TATA, JSW, JINDAL, MANGALAM, and SAIL.
500
-
55830
The scope includes supply of Steel Reinforcement for RCC work including straightening, cutting
bending, placing in position, C/W/G etc. all complete at all levels as directed by EIC/SIC/Site Engineer
using TMT bars of grade Fe-500D or better of size as directed by EIC/SIC/Site Engineer. Approved
Make: TATA Tiscon, JSW Neosteel, SAIL, Kamdhenu Nxt, Jindal Panther. Any tools, tackles, material,
labour, etc. required are included in this SOR.
200
-
21516
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40 mm nominal size, well rammed andconsolidated and grouted with fine sand, including finishing the top smooth. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR.
100
-
81798
The scope includes Providing and fixing of 1st quality ceramic glazed tiles (stain resistive) conforming to IS:15622 , of approved make (i.e., Kajaria, Somany, Cera, Hind ware, Asian Granito, Nitco) in all colours ,shades of any size between 600x600mm / 300x600mm / 395x395mm / 300x450mm as approved by EIC/SIC/Site Engineer, on walls, in skirting, risers of steps & daos, over 12 mm bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. The scope also includes proper stacking of serviceable items at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR.
30
-
33681.6
The scope includes proper raking & hacking of the wall surface to make it suitable for plastering and then preparation of 1:6 (1 cement: 6 fine sand) ratio or better cement mixture as directed by EIC/SIC/Site Engineer and applying the plaster which shall be minimum 12 mm thick. Further, post plastering, proper curing has to be done minimum twice a day for minimum seven days. The scope also includes proper stacking of serviceable items at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR.
250
-
84600
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. The scope includes cleaning & preparation of the surface for painting. Further The scope includes minor crack repairing, hole filling of walls/ projection/any exterior surface etc using putty/white cement/matching pigment including applying additional coats wherever required to achieve even shade and colour - minimum Two coats or more coats (if required for even shade). Any tools, tackles, material, labour, etc. required are included in SOR.
4000
-
535680
The Scope Includes Removing dry,oil or water bound distemper, white or colour wash or any paint (which may be emulsion, acrylic, putty, Enamel etc. any type of paint) by scrapping and sand papering and preparing the surface smooth including necessary minor repairs with putty etc. complete Rate is inclusive of necessary scaffolding, labour and all materials required to complete the work. Any tools, tackles, material, labour, etc. required are included in this SOR.
4000
-
100080
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work
2000
-
218040
Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)
500
-
51930
The scope includes Demolishing /Dismantling of existing brick work including its PCC,CC, Plaster, other such items etc. as directed by EIC/SIC/Site Engineer. The scope also includes proper stacking of serviceable items such as bibcocks, sink etc. at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR.
15
-
22312.8
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material. The scope also includes Demolishing /Dismantling of existing Tile, marble, granite, Kota Stone, any other stone up to 25 mm thickness etc. in floors, walls, cabinets and roofs including removal of its cement mortar/PCC etc. and preparation of the surface to make it suitable for fresh plastering/new tiles/stone/marble/granite etc. fixing as directed by EIC/SIC/Site Engineer. The scope also includes proper stacking of serviceable items such as tiles/marble/granite (without cracks) etc. at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR
5
-
14233.8
Scope of work for Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm).This items will be use in existing windows and doors, also as per requirment given by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR
10
-
3708
Toughened glass of nominal thickness 8 mm (weight not less than 20.00 kg/sqm). Providing 8 mm thick toughened glass edge/Glass door with diamond polish & smooth finish. The edges must be chamfered/tappered/buffered as per the requirement to ensure safety. Any tools, tackles, material, labour, etc. required are included in this SOR
15
-
11304
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. Any tools, tackles, material, labour, etc. required are included in this SOR
20
-
35595.6
Scope of work for Factory made 30 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of sheet glass using 10 kg/ sqm glass panes as per drawing andnecessary accessories and screws etc included in this rate. As per instruction of EIC/SIC Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR
5
-
9720
Scope of work for Painting with aluminium paint of approved brand and manufacture to. Two or more coats on new work as per instruction of EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR. The paint shall be done using spray machine or manually as asked by EIC/SIC/Site Engineer. No additional amount shall be paid for deployment of the spray machine.
10
-
1457.4
The scope includes Demolishing /Dismantling of RCC including cutting/demolishing of its reinforcement bars., PCC, Plaster,etc. as directed by EIC/SIC/Site Engineer. The scope also includes proper stacking of serviceable items such as bibcocks, sink etc. at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR.
3
-
8382.78
The scope includes Providing and fixing SS soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms or Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms as asked by EIC/SIC/Site Engineer. The scope also includes dismantling of old fittings, dish holder, soap holder/container, SS plates and its accesories and other accesories etc. as asked by EIC/SIC/Site engineer. All usable items shall be stacked at designated location and unusable / scrap/waste material shall be disposed off beyond 2 km from GAIL Premises. Any tools, tackles, material, labour, etc required are included in this SOR.
5
-
580.5
Providing and fixing toilet paper holder : C.P. brass/SS as asked by EIC . Any tools, tackles, material, labour, etc required are included in this SOR.
10
-
8169.6
Floor painting with floor enamel paint Two or more coats of approved brand and manufacture of required colour to give an even shade as asked by EIC. Any tools, tackles, material, labour, etc required are included in this SOR. Make: Asian, Berger, Nerolac
20
-
3154.8
Aluminium work : Providing and fixing aluminium work for doors , windows ventilators and partitions with extruded built up standard tabular sections /appropriate Z sections and other sections of approved make conforming of IS:733 and IS:1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitred and jointed mechanically for glazing/panelling including cleat angle. Aluminium snap beading for glazing/panelling, C. P. Brass/Stainless Stekk screws, all complete as per architectural drawings amd the direction of EIC. (Glazing and panelling to be paid for separately) For shutters of doors, windows & Ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket requried (Fittings shall be paird for separately). Powder Coated Aluminium (minimum thickness of powder coating 50 microns). For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). Any tools, tackles, material, labour, etc required to complete the job with proper finishing and as per satisfaction of GAIL EIC/SIC/Site Engineer are included in this SOR.
100
-
52074
Floor Spring : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logoembossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness. Any tools, tackles, material, labour, etc required are included in this SOR.
10
-
29386.2
Providing and fixing of Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thick. The scope includes cutting, jointing, screwing etc of theparticle board as directed by EIC/SIC/Site engineer. Any accesories required such as adhesive, brackets, nails, screws, cleats etc are included in the scope. Any tools, tackles, material, labour, etc required are included in this SOR.
20
-
12000
EPDM Gasket for uPVC window/door/glass doors : Providing and changing rubber for glass doors and windows as per required size. Any tools, tackles, material, labour, etc required are included in this SOR.
100
-
1800
The scope includes Cleaning of terrace/loft water storage tank (inside & outside surface area) of 1000 litre capacity or more as decided by EIC (for more than 1000 litre, suitable measurement corrosponding to the ratio shall be paid) at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer in- Charge. (The old date already written on tank should be removed with paint remover or black paint) (If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). All non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc required to complete the job as directed by EIC/SIS/Site Engineer are included in this SOR.
40
-
21480.8
The scope includes Cleaning of terrace/loft water storage tank (inside & outside surface area) of 500 litre capacity or more as decided by EIC (for more than 500 litre, suitable measurement corrosponding to the ratio shall be paid.) at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer in- Charge. (The old date already written on tank should be removed with paint remover or black paint) (If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). All non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc required to complete the job as directed by EIC/SIS/Site Engineer are included in this SOR.
40
-
15622.4
PVC Pipe 75 mm dia single socket pipes : Supply & installation of rigid PVC pipes of Approved make including jointing the pipe and fittings with suitable solvent as per manufacturer specifications, laying the pipes under floors , walls including necessary support clamps, scaflolding , making holes in walls , cutting pipes to required length testing the installed pipes including all required sockets, tees, bends shoes traps etc.Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. The scope includes supply and fixing of any part/accesories which are required to complete the job as directed by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR.
100
-
25560
PVC Pipe 110 mm dia single socket pipes : Supply & installation of rigid PVC pipes of Approved make make including jointing the pipe and fittings with suitable solvent as per manufacturer specifications, laying the pipes under floors , walls including necessary support clamps, scaflolding , making holes in walls , cutting pipes to required length testing the installed pipes including all required sockets, tees, bends shoes traps etc.Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. The scope includes supply and fixing of any part/accesories which are required to complete the job as directed by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR.
100
-
38370
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.With float glass panes of 4.0 mm thickness (weight notless than 10kg/sqm). Any tools, tackles, material, labour, etc. required are included in this SOR
10
-
12237.6
Repair of aluminum doors : Repair & maintenance of aluminium doors (Pivot and floor spring) for smooth opening & closing of door. The scope includes replacement/repairing of the rubber /Neoprin gasket , door handles, magnets, locks, latches etc as asked by EIC/SIC/Site Engineer. The scope includes checking and resolviong the allignment of the aluminium door. Any tools, tackles, material, labour, etc. required are included in this SOR
20
-
5858.6
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Any tools, tackles, material, labour, etc. required are included in this SOR
15
-
15413.4
Grinding/budding and Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. All as per approval and instructions of the Engineer-in-charge. Any tools, tackles, material, labour, etc. required are included in this SOR
20
-
10008
The Scope includes preparation of surface and Providing and laying vitrified and/or Anti-skid tiles (Double charged) in size, colour & shade as approved by EIC/SIC/Site Engineer with water absorption less than 0.08% and conforming to IS: 15622, of approved make (i.e., Kajaria, Somany, Cera, Hindware, Asian Granito, Nitco), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete. Any tools, tackles, material, labour, etc. required are included in this SOR.
70
-
123186
Providing and Fixing of CP brass bib cock/ stop cock/ angle cock /Pillar cock/2-way bibcock of approved quality 15 mm nominal size. The scope includes removal/dismantling of old taps/ bibcocks/ valves/ fittings etc. and supplying and installation of bib cock/ stop cock/ angle cock /Pillar cock/2-way bibcock of approved make, model and quality i.e., Jaquar, Hindware, Kohler, Cera in SS/Silver/ chrome finish as directed by EIC/SIC/Site Engineer. Wall mounted/Washbasin mount etc as asked by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
7327.1
The scope includes removal/dismantling of old taps/bibcocks/valves/ fittings etc. and supplying and installation of CP brass/SS long body bib cock of approved make, model and quality i.e., Jaquar , Hindware , Kohler , Cera in SS/Silver/chrome finish as directed by EIC/SIC/Site Engineer. Wall mounted/Washbasin mount etc as asked by EIC/SIC/Site Engineer. The weight of long body bib cock shall not be less than 690 grams and bore size shall not be less than 15 mm. Further, its length from wall/entry bore to centre point of exit bore shall not be less than 140 mm. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
9559.5
Supplying of CP Brass Mixer TAP. The mixer tap must be along body tap/ swine neck with length not less than 145 mm from fixture to centre of outlet hole. The weight of mixer tap shall not be less than 690 grams. The mixer bore size shall not be less than 15 mm. The SOR also includes painting of accessories/ fittings and brackets, cutting and making good the walls wherever required. Approved make Jaquar, Hindware, Kolher, Cera, Somany. Any tools, tackles, material, labour, etc. required are included in this SOR.
5
-
15669.65
The scope includes Providing and fixing minimum 8 mm dia C.P. brass / S.S. Jet with flexible tube of minimum 1 metre long with S.S. triangular plate to European/Indian type W.C. of quality and make as approved by Engineer - in - Charge. Make: Jaquar, Hindware, Cera, Kohler, Somany. Any connecting pipes, fittings, SS Tubes etc. accessories are included in this scope. The scope also includes dismantling of any previously installed health faucets. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed of beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
11394.8
The Scope Includes Providing and fixing of Table Top/Counter Top / Hanging/ pedastrial / Under Counter/Oval shape/rectangular shape/square shape/elliptical/circular etc. White Vitreous China Wash basin of size 550x400 mm or other size as per direction of EIC, of approved make, model and quality (Jaquar, Kohler, Hindware, Cera) along with Long body CP Brass/SS basin mixer of approved Make, Model and quality (Jaquar, Hindware, Kohler, Cera), C.I. Brackets, SS fittings, pipes, bottle trap, other accessories which are required for complete installation for final usage as per direction of EIC/SIC/Site engineer. The design & shape of washbasin (Table Top/Counter Top/Hanging/pedastrial/Under Counter/Oval shape/rectangular shape/square shape/elliptical/circular etc.) shall be approved by EIC/SIC/Site engineer prior to the execution of job. Also the design/shape/model of the mixer tap shall be approved by EIC/SIC/Site Engineer prior to the start of job. The mixer tap must be along body tap/ swine neck with length not less than 145 mm from fixture to centre of outlet hole. The weight of mixer tap shall not be less than 690 grams. The mixer bore size shall not be less than 15 mm. The SOR also includes painting of accessories/ fittings and brackets, cutting and making good the walls wherever required.
2
-
8142.84
The Scope includes Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Make: Jaquar, Hindware, Cera, Kohler, Somany. Any connecting pipes, fittings, SS Tubes etc. accessories are included in this scope. The scope also includes dismantling of any previously installed WC Pan. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
2
-
9241.56
Supply & installation Toilet Flush Tank (Standard) White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings as asked bye EIC. Make: Jaquar, Hindware, Cera, Kohler, Somany
4
-
5520
Providing and fixing dry cladding upto 10 metre heights with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and sizeupto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant asper Architectural drawing and direction of Engineer-in-charge.(The steel frame work, stainless steel cramps and pins etc. shall be paidfor separately).As per site requirment(Red sand stone/White sand stone)
3
-
8854.92
The scope includes Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes externally, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of EIC/SIC/Site Engineer. The scope also includes dismantling and proper disposal of old pipes wherever required as per direction of EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR. (For 25 mm nominal outer dia. Pipes).
50
-
22239
The scope includes Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes externally, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of EIC/SIC/Site Engineer. The scope also includes dismantling and proper disposal of old pipes wherever required as per direction of EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR. (For 50 mm nominal outer dia. Pipes).
50
-
48711
The scope incudes supply and installation of Polyethylene water storage tank with cover and suitable locking arrangement along with inlet and outlet valve of approved make (Sintex, plasto, astral, supreme) and as directed by Engineer in-charge. Any valves/pipes/tubes/fittings/latch/locks, etc accesories required are included in this scope. The scope also includes dismantling of old tanks and its accesories as asked by EIC/SIC/Site engineer. All usable items shall be stacked at designated location and unusable / scrap/waste material shall be disposed off beyond 2 km from GAIL Premises. Any tools, tackles, material, labour, etc required are included in this SOR.
2000
-
23280
Providing and fixing Square shape up to 450x450 mm precast R.C.C. manhole cover/Precast MS/Iron manhole cover with frame - Light Duty cover capable of withstanding 2.5MT/25kN of load. Any tools, tackles, material, labour, etc required are included in this SOR.
20
-
13800
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Any tools, tackles, material, labour, etc required are included in this SOR.
2
-
1078.92
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete for wooden doors. Any tools, tackles, material, labour, etc required are included in this SOR.
10
-
8685.6
The scope includes Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour &60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Complete all as per direction of Engineer-in-Charge. The scope also includes doing PCC wherever required or as per direction of EIC/SIC/Site engineer prior laying of the paver blocks for providing hardness to the soil surface. Any tools, tackles, material, labour, etc. required are included in this SOR.
100
-
90840
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. Any tools, tackles, material, labour, etc. required are included in this SOR.
5
-
4931.7
Random rubble masonry with hard stone in substructure below plinth and superstructure above plinth
level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse
sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement
mortar 1:6 (1 cement : 6 coarse sand). Any tools, tackles, material, labour, etc. required are included in
this SOR.
10
-
99308.4
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including cutting, welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side of waistslab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). Any tools, tackles, material, labour, etc. required are included in this SOR.
20
-
14694
Supplying and fixing of Brass/SS curtain rod 25 mm dia 1.25 mm thick along with necessary brackets/braces, screws, bulbs, nut/bolts, clips, J-Hooks, and all accessories etc. as directed by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR.
20
-
4560
Providing and fixing Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Any tools, tackles, material, labour, etc. required to complete the job as per satisfaction of EIC/SIC/Site Engineer are included in this SOR.
10
-
24462.6
Providing and fixing Aluminium/SS hanging and wooden floor door stopper with twin rubber & stopper of approved quality. Any tools, tackles, material, labour, etc. required to complete the job as per satisfaction of EIC/SIC/Site Engineer are included in this SOR.
50
-
3000
The scope includes Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Any Screws, fittings, etc. accessories are included in this scope. The scope also includes dismantling of any previously installed mirrors. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
5
-
8466.9
The Scope Includes Cleaning of existing surface using scrapper, wire brush, amrey paper, Sand paper, buffing machine etc. to remove existing painting/putty/loose materials etc. and then Providing & Applying Plaster of Paris punning minimum 2 mm thick (nominal) on walls & minimum 2 mm thick on ceiling and directed by EIC/SIC/Site Engineer. The scope also includes levelling and smooth finishing of the surface by rubbing post applying the POP/Putty. Further, post applying the POP/Putty, the scope also includes application of 01 coat of primer without any additional cost implication. Every step shall be checked by GAIL Site engineer/SIC. In case any defect/flaws observed, Rectification of the same shall be done by contractor without any additional cost implication to GAIL. Any tools, tackles, material, labour, etc. required are included in this SOR.
200
-
51432
Providing & fixing glass panes with putty and glazing clips in steel/aluminium/wooden doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes with proper finishing as per satisfaction of EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
11283.6
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. Any tools, tackles, material, labour, etc. required are included in this SOR.
100
-
70266
Providing Hydraulic Excavator of 1 cum bucket (JCB) along with its operator to carry out job as directed by EIC/SIC/Site Engineer.
10
-
9600
Providing Tractor with trolley with minimum 100 CFT (approx 3 cubic meter) capacity to carry out job as directed by EIC/SIC/Site Engineer. The tractor trolley shall be used on requirement of GAIL when GAIL wishes to shift any material/waste to other place. It is important to note that any waste material/scrap as declared by EIC/SIC/Site Engineer must be disposed off beyond 2 KM range from GAIL Premises. The cost of labour for loading of material/scrap/waste is included in the item and shall not be paid separately. Further one day shall be measured when minimum 4 rounds are completed by the trolley i.e, minimum 12 cubic meter of soil/waste/scrap is disposed off/removed from GAIL Premises. Suitably ratioed measurement shall be done if less scrap/less rounds are completed due to any reason. Decision of EIC shall be final in case of any conflict and shall be binding to the contractor. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
14400
The scope includes completely emptying the soak pit / septic tank / chambers / manholes / sewer line using suction jetting machine. Post emptying the sewer waste, the soak pit / septic tank / chambers / manholes / sewer line should be cleaned with fresh water with jet pressure. The scope includes cleaning of the lines if the lines are chocked. 1 man day shall be measured/counted when all the soak pits, chambers, septic tank, manholes, sewer lines as directed or asked by EIC/SIC/Site engineer of either GAIL Vihar colony Abu Road or IPS Abu Road or both are cleaned as mentioned above. Measurements shall not be done according to the number of rounds/total days taken by machine/tanker. Decision of EIC/SIC shall be final and binding in this regard. All wastage shall be disposed off beyond 5 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
4
-
192000
The scope includes deployment of resources for misc. /unforeseen works as per the requirement raised by GAIL EIC/SIC/Site Engineer which cannot be measured. The resources deployed shall carry all required tools and tackles for the assigned work for which they are deployed. Under this scope, if any material is required separately for the work assigned, other than the tools and tackles, same shall be provided separately. The resource deployment shall be as follows: Deployment of skilled resource/mason/carpenter/plumber etc. as detailed above as per requirement of GAIL
200
-
179760
The scope includes deployment of resources for misc. /unforeseen works as per the requirement raised by GAIL EIC/SIC/Site Engineer which cannot be measured. The resources deployed shall carry all required tools and tackles for the assigned work for which they are deployed. Under this scope, if any material is required separately for the work assigned, other than the tools and tackles, same shall be provided separately. The resource deployment shall be as follows: Deployment of unskilled resource/helper/beldar etc. as detailed above as per requirement of GAIL
250
-
193500
Miscellaneous Extra jobs which are not covered in the above mentioned scope of work and which may be required in future any unexpected or contigent nature of job
120000
-
120000
AMC CIVIL AT GAIL VIHAR ABU ROAD
-
-
-
The Scope of work includes the complete job of earth work with Excavation jobs by manual/mechanical/Hydraulic means in all type of soil/rocks/surface/land etc. minimum 300 mm deep or as per drawing or as directed by EIC/SIC/Site Engineer .The scrap generated and the excavated soil/extra unusable items/stones shall be removed from the site & disposed off beyond 2KM. of GAIL site. Any tools, tackles, material, labour, etc. required are included in this SOR
50
-
12327
EARTh FILLING: Filling available excavatred earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20 Cm in depth. Consolidating each deposited layer by ramming and watering lead upto 50 M and lift upto 1. 5 M.
15
-
4571.1
The Scope of work for surface dressing includes complete removal of trees/vegetation/herbs/algae/waste etc. to prepare the surface /ground for proper work/PCC/RCC. All the waste/ scrap/ unusable materials are to be disposed off beyond 2 KM from Gail site. Any tools, tackles, material, labour, etc. required are included in this SOR
200
-
6756
Scope of work includes supply and laying of position cement concrete/RCC of specified grade in ratio of
1:2:4 or 1:1.5:3 or any other specified mix by EIC (1 cement : 2/1.5 coarse sand : 4/3 graded stone
aggregate 20 mm nominal size) below and upto plinth levels and above plinth levels upto 5th floor.
The scope also include proper compaction of loose soil prior to the laying of concrete with proper shape
and size as per drawing details or/and as directed by the EIC/SIC/Site engineer. Disposal of scrap
/unusable material beyond 2 KM from GAIL Site shall also be in the scope of this SOR. Any tools,
tackles, material, labour, etc. required are included in this SOR. The cost of centring and shuttering is not
included in this item
20
-
176763.6
Scope of work includes supply and laying of position cement concrete of specified grade in ratio of 1:3:6
or 1:4:8 or as specified by the EIC (1 cement : 3/4 coarse sand : 6/8 graded stone aggregate 40
mm nominal size) below and upto plinth levels and above plinth levels upto 5th floor. The scope also
include proper compaction of loose soil prior to the laying of PCC with proper shape and size as per
drawing details or/and as directed by the EIC/SIC/Site engineer. Disposal of scrap /unusable material
beyond 2 KM from GAIL Site shall also be in the scope of this SOR. Any tools, tackles, material, labour,
etc. required are included in this SOR. The cost of centring and shuttering is not included in this item.
20
-
151825.2
The scope includes Providing Centering and shuttering including strutting, propping, bracers, etc. and removal of form for :Suspended floors, roofs, landings, balconies and access, platform, Shelves (Cast in situ),ground, Foundations footings, bases of Columns etc. at all levels as directed by EIC/SIC/Site Engineer. Shuttering oil must be used on shuttering material during casting work. Any tools, tackles, material, labour, etc. required are included in this SOR.
30
-
11086.2
BRICK WORK IN Foundation & superstructure : Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :With Modular bricks. Bricks shall be free from cracks and flaws and nodules of free lime. Bricks shall have smooth rectangular faces with sharp corners. Bricks shall be uniform in colour. The Scope also includes cost of transportation of the bricks from manufacturer to the GAIL Site.
10
-
93775.8
The scope includes Providing and laying "Half brick masonry with bricks of class designation 75 or better in foundation and plinth & superstructure in Cement mortar 1:4 (1 cement: 4 coarse sand)" FPS non modular bricks. Bricks shall be free from cracks and flaws and nodules of free lime. Bricks shall have smooth rectangular faces with sharp corners. Bricks shall be uniform in colour. The Scope also includes cost of transportation of the bricks from manufacturer to the GAIL Site.
30
-
36653.4
Random rubble masonry with hard stone in substructure below plinth and superstructure above plinth
level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse
sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement
mortar 1:6 (1 cement : 6 coarse sand). Any tools, tackles, material, labour, etc. required are included in
this SOR.
2
-
19861.68
The scope includes Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour &60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Complete all as per direction of Engineer-in-Charge. The scope also includes doing PCC wherever required or as per direction of EIC/SIC/Site engineer prior laying of the paver blocks for providing hardness to the soil surface. Any tools, tackles, material, labour, etc. required are included in this SOR.
150
-
136260
The scope includes Providing and fixing of Marble as directed by EIC/SIC/Site engineer which shall be minimum 18 mm thick gang saw cut, mirror polished, remoulded and prepolished ,machine cut for platform, window sills ,facias and similar locations of required size, shade , colour & texture as approved by EIC/SIC/Site Engineer, Joints treated with white cement with the matching pigment , epoxy touch-ups, including rubbing ,curing, moulding & polishing to edges to give high gloss finish etc. complete at all levels, including mortar bed 1:4 in required thickness as per site. Any tools, tackles, material, labour, etc. required are included in this SOR. Further, if required at site for the moulding/buffing/polishing, same shall be done as per EIC/SIC/Site Engineer directions without any additional cost implication. Makrana white marble, RajNagar Plain white marble, Udaipur green marble, Zebra Black marble, Ambaji White marble as directed by the EIC/SIC/Site Engineer.
15
-
47510.1
Providing wood work in frames : Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs orwith dash fasteners of required dia & length . Sal wood, teak wood, Mahogany, Sagwan as directed by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR
1
-
128065.02
Providing & fixing ISI marked FLUSH DOOR: Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR
10
-
22583.4
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR
1 mm thick.
30
-
27504
The scope includes Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Choukhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 grams) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e., depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Any Screws, fittings, latch, locks, and etc. accessories required are included in this scope The scope also includes dismantling of any previously installed doors/choukhat as directed by EIC/SIC/Site engineer. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR. (Frame size 45 x 70 mm)
150
-
113805
The scope includes Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Choukhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 grams) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e., depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Any Screws, fittings, latch, locks, and etc. accessories required are included in this scope The scope also includes dismantling of any previously installed doors/choukhat as directed by EIC/SIC/Site engineer. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR. (Frame size 65 x 100 mm)
150
-
180027
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type 30 mm thick door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Certificate from manufacture clearly mentioning the above parameters shall be submitted to EIC/SIC/Site engineer. Any Screws, fittings, latch, locks, door handle etc. accessories required are included in this scope. The scope also includes dismantling of any previously installed doors/choukhat as directed by EIC/SIC/Site engineer. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
40
-
189792
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second class teak wood. Any tools, tackles, material, labour, etc. required are included in this SOR.
20
-
71959.2
CUP BOARD SHUTTER : Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, sliding channel etc all complete as per direction of the Engineer-in-Charge. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR
15
-
35688.6
Providing and fixing of Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thick. The scope includes cutting, jointing, screwing etc of theparticle board as directed by EIC/SIC/Site engineer. Any accesories required such as adhesive, brackets, nails, screws, cleats etc are included in the scope. Any tools, tackles, material, labour, etc required are included in this SOR.
50
-
30000
The Scope of work for Steel Structure includes providing and fixing of Steel Structure various section as per drawing and/or as directed by EIC/SIC/Site Engineer all Complete including straightening, cutting, bending, placing in position, binding, riveting, bolting, welding, hoisting, fixing etc. as per drawing/directions provided by EIC/SIC/Site engineer. The scope also includes to remove all loose particles for and apply primer to get smooth finish for all steel structure section. Any tools, tackles, material, labour, etc. required are included in this SOR. Approved make of Steel: TATA, JSW, JINDAL, MANGALAM, and SAIL.
150
-
16749
The scope includes supply of Steel Reinforcement for RCC work including straightening, cutting bending, placing in position, C/W/G etc. all complete at all levels as directed by EIC/SIC/Site Engineer using TMT bars of grade Fe-500D or better of size as directed by EIC/SIC/Site Engineer. Approved Make: TATA Tiscon, JSW Neosteel, SAIL, Kamdhenu Nxt, Jindal Panther. Any tools, tackles, material, labour, etc. required are included in this SOR.
100
-
10758
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40 mm nominal size, well rammed andconsolidated and grouted with fine sand, including finishing the top smooth. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR.
50
-
40899
The scope includes Providing and fixing of 1st quality ceramic glazed tiles (stain resistive) conforming to IS:15622 , of approved make (i.e., Kajaria, Somany, Cera, Hind ware, Asian Granito, Nitco) in all colours ,shades of any size between 600x600mm / 300x600mm / 395x395mm / 300x450mm as approved by EIC/SIC/Site Engineer, on walls, in skirting, risers of steps & daos, over 12 mm bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. The scope also includes proper stacking of serviceable items at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR.
50
-
56136
The scope includes proper raking & hacking of the wall surface to make it suitable for plastering and then preparation of 1:6 (1 cement: 6 fine sand) ratio or better cement mixture as directed by EIC/SIC/Site Engineer and applying the plaster which shall be minimum 12 mm thick. Further, post plastering, proper curing has to be done minimum twice a day for minimum seven days. The scope also includes proper stacking of serviceable items at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR
50
-
16920
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm)
on existing cement paint surface. The scope includes cleaning & preparation of the surface for painting. Further The scope includes minor crack repairing, hole filling of walls/projection/any exterior surface etc using putty/white cement/matching pigment including applying additional coats wherever required to achieve even shade and colour - minimum Two coats or more coats (if required for even shade). Any tools, tackles, material, labour, etc. required are included in this SOR.
1500
-
200880
The Scope Includes Removing dry,oil or water bound distemper, white or colour wash or any paint (which may be emulsion, acrylic, putty, Enamel etc. any type of paint) by scrapping and sand papering and preparing the surface smooth including necessary minor repairs with putty etc. complete Rate is inclusive of necessary scaffolding, labour and all materials required to complete the work. Any tools, tackles, material, labour, etc. required are included in this SOR.
3000
-
75060
Wall painting with plastic emulsion paint of approved brand and
manufacture to give an even shade: One or more coats on old work
1500
-
163530
Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)
800
-
83088
The scope includes Demolishing /Dismantling of existing brick work including its PCC, CC, Plaster, other such items etc. as directed by EIC/SIC/Site Engineer. The scope also includes proper stacking of serviceable items such as bibcocks, sink etc. at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
14875.2
Dismantling dressed stone work ashlar face stone work, marble work or
precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material. The scope also includes Demolishing /Dismantling of existing Tile, marble, granite, Kota Stone, any other stone up to 25 mm thickness etc. in floors, walls, cabinets and roofs including removal of its cement mortar/PCC etc. and preparation of the surface to make it suitable for fresh plastering/new tiles/stone/marble/granite etc. fixing as directed by EIC/SIC/Site Engineer. The scope also includes proper stacking of serviceable items such as tiles/marble/granite (without cracks) etc. at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR
3
-
4346.1
Scope of work for Float glass panes of nominal thickness 4 mm (weight not less
than 10 kg/sqm).This items will be use in existing windows and doors, also as per requirment given by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR
30
-
11124
Toughened glass of nominal thickness 8 mm (weight not less than 20.00 kg/sqm). Providing 8 mm thick toughened glass edge/Glass door with diamond polish & smooth finish. The edges must be chamfered/tappered/buffered as per the requirement to ensure safety. Any tools, tackles, material, labour, etc. required are included in this SOR
5
-
3768
Aluminium work : Providing and fixing aluminium work for doors , windows ventilators and partitions with extruded built up standard tabular sections /appropriate Z sections and other sections of approved make conforming of IS:733 and IS:1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitred and jointed mechanically for glazing/panelling including cleat angle. Aluminium snap beading for glazing/panelling, C. P. Brass/Stainless Stekk screws, all complete as per architectural drawings amd the direction of EIC. (Glazing and panelling to be paid for separately) For shutters of doors, windows & Ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket requried (Fittings shall be paird for separately). Powder Coated Aluminium (minimum thickness of powder coating 50 microns). For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). Any tools, tackles, material, labour, etc required to complete the job with proper finishing and as per satisfaction of GAIL EIC/SIC/Site Engineer are included in this SOR.
30
-
15622.2
Floor Spring : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logoembossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness. Any tools, tackles, material, labour, etc required are included in this SOR.
5
-
14693.1
Providing and changing rubber for glass doors and windows as per required size. Any tools, tackles, material, labour, etc required are included in this SOR.
20
-
2929
35 KL water Tanks Cleaning: Cleaning for required chemical(potassium paramagnet) and as per EIC Instruction of township underground tank 35 KL litre capacity. The scope includes Cleaning of UG water storage tank of 35 KL capacitty as decided by EIC with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer in- Charge. (The old date already written on tank should be removed with paint remover or black paint) (If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). All non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc required to complete the job as directed by EIC/SIS/Site Engineer are included in this SOR.
4
-
7811.28
The scope includes Cleaning of terrace/loft water storage tank (inside & outside surface area) of 2000 litre capacity or more as decided by EIC (for more than 2000 litre, suitable measurement corrosponding to the ratio shall be paid) at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer in- Charge. (The old date already written on tank should be removed with paint remover or black paint) (If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). All non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc required to complete the job as directed by EIC/SIS/Site Engineer are included in this SOR.
56
-
38275.44
The scope includes Cleaning of terrace/loft water storage tank (inside & outside surface area) of 1000 litre capacity or more as decided by EIC (for more than 1000 litre, suitable measurement corrosponding to the ratio shall be paid) at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer in- Charge. (The old date already written on tank should be removed with paint remover or black paint) (If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). All non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc required to complete the job as directed by EIC/SIS/Site Engineer are included in this SOR.
48
-
25776.96
The scope includes Cleaning of terrace/loft water storage tank (inside & outside surface area) of 500 litre capacity or more as decided by EIC (for more than 500 litre, suitable measurement corrosponding to the ratio shall be paid) at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer in- Charge. (The old date already written on tank should be removed with paint remover or black paint) (If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). All non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc required to complete the job as directed by EIC/SIS/Site Engineer are included in this SOR.
112
-
43743.84
PVC Pipe 75 mm dia single socket pipes : Supply & installation of rigid PVC pipes of Approved make including jointing the pipe and fittings with suitable solvent as per manufacturer specifications, laying the pipes under floors , walls including necessary support clamps, scaflolding , making holes in walls , cutting pipes to required length testing the installed pipes including all required sockets, tees, bends shoes traps etc.Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. The scope includes supply and fixing of any part/accesories which are required to complete the job as directed by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR.
50
-
12780
PVC Pipe 110 mm dia single socket pipes : Supply & installation of rigid PVC pipes of Approved make make including jointing the pipe and fittings with suitable solvent as per manufacturer specifications, laying the pipes under floors , walls including necessary support clamps, scaflolding , making holes in walls , cutting pipes to required length testing the installed pipes including all required sockets, tees, bends shoes traps etc.Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. The scope includes supply and fixing of any part/accesories which are required to complete the job as directed by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR.
100
-
38370
Scope of work for Painting with aluminium paint of approved brand and manufacture to. Two or more coats on new work as per instruction of EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR. The paint shall be done using spray machine or manually as asked by EIC/SIC/Site Engineer. No additional amount shall be paid for deployment of the spray machine.
100
-
14574
Providing and fixing wire gauge laminated veneer lumber shutters conformingto IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63mm as per IS :1568, for doors, windows and clerestory windows fixing with butthinges of required size with necessary screws, as per directions of Engineerin-charge: 30 mm thick shutters. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR. The scope includes providing Door shutters with SS Jali (Wire Gauge) as per design approved by EIC/SIC/Site Engineer with handle on both sides, hinges, 2 Latchs, Stopper etc. all necessary accesories as directed by EIC/SIC/Site Engineer
50
-
85800
The scope includes Demolishing /Dismantling of RCC including cutting/demolishing of its reinforcement bars., PCC, Plaster,etc. as directed by EIC/SIC/Site Engineer. The scope also includes proper stacking of serviceable items such as bibcocks, sink etc. at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR.
2
-
5588.52
The scope includes Providing and fixing SS soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms or Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms as asked by EIC/SIC/Site Engineer. The scope also includes dismantling of old fittings, dish holder, soap holder/container, SS plates and its accesories and other accesories etc. as asked by EIC/SIC/Site engineer. All usable items shall be stacked at designated location and unusable / scrap/waste material shall be disposed off beyond 2 km from GAIL Premises. Any tools, tackles, material, labour, etc required are included in this SOR.
20
-
2322
Providing and fixing toilet paper holder : C.P. brass/SS as asked by EIC . Any tools, tackles, material, labour, etc required are included in this SOR.
12
-
9803.52
Polishing on wood work with ready mixed wax polish of approved brand and manufacture :New/old Work. Any tools, tackles, material, labour, etc required are included in this SOR.
50
-
9849
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.With float glass panes of 4.0 mm thickness (weight notless than 10kg/sqm). Any tools, tackles, material, labour, etc. required are included in this SOR
10
-
12237.6
Repair of aluminum doors : Repair & maintenance of aluminium doors (Pivot and floor spring) for smooth opening & closing of door. The scope includes replacement/repairing of the rubber /Neoprin gasket , door handles, magnets, locks, latches etc as asked by EIC/SIC/Site Engineer. The scope includes checking and resolviong the allignment of the aluminium door. Any tools, tackles, material, labour, etc. required are included in this SOR
10
-
2929.3
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Any tools, tackles, material, labour, etc. required are included in this SOR
10
-
10275.6
Grinding/budding and Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. All as per approval and instructions of the Engineer-in-charge. Any tools, tackles, material, labour, etc. required are included in this SOR
50
-
25020
The Scope includes preparation of surface and Providing and laying vitrified and/or Anti-skid tiles (Double charged) in size, colour & shade as approved by EIC/SIC/Site Engineer with water absorption less than 0.08% and conforming to IS: 15622, of approved make (i.e., Kajaria, Somany, Cera, Hindware, Asian Granito, Nitco), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete. Any tools, tackles, material, labour, etc. required are included in this SOR.
215
-
365495.7
The Scope Includes Providing and fixing of Table Top/Counter Top / Hanging/ pedastrial / Under Counter/Oval shape/rectangular shape/square shape/elliptical/circular etc. White Vitreous China Wash basin of size 550x400 mm of approved make, model and quality (Jaquar, Kohler, Hindware, Cera) along with Long body CP Brass/SS basin mixer of approved Make, Model and quality (Jaquar, Hindware, Kohler, Cera), C.I. Brackets, SS fittings, pipes, bottle trap, other accessories which are required for complete installation for final usage as per direction of EIC/SIC/Site engineer. The design & shape of washbasin (Table Top/Counter Top/Hanging/pedastrial/Under Counter/Oval shape/rectangular shape/square shape/elliptical/circular etc.) shall be approved by EIC/SIC/Site engineer prior to the execution of job. Also the design/shape/model of the mixer tap shall be approved by EIC/SIC/Site Engineer prior to the start of job. The mixer tap must be along body tap/ swine neck with length not less than 145 mm from fixture to centre of outlet hole. The weight of mixer tap shall not be less than 690 grams. The mixer bore size shall not be less than 15 mm. The SOR also includes painting of accessories/ fittings and brackets, cutting and making good the walls wherever required.
20
-
60524.4
Providing and fixing Stainless Steel A Isis 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl depth 200 mm. The SOR also includes painting of accessories/ fittings and brackets, cutting and making good the walls wherever required. Any tools, tackles, material, labour, etc. required are included in this SOR.
2
-
8010.84
The Scope includes Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Make: Jaquar, Hindware, Cera, Kohler, Somany. Any connecting pipes, fittings, SS Tubes etc. accessories are included in this scope. The scope also includes dismantling of any previously installed WC Pan. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
2
-
13875.24
The Scope includes Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard approved make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with approved make ISI marked white solid plastic seat and lid. Make: Jaquar, Hindware, Cera, Kohler, Somany. Any connecting pipes, fittings, SS Tubes etc. accessories are included in this scope. The scope also includes dismantling of any previously installed WC Pans. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
5
-
32560.8
Supply and installation Toilet Flush Tank (Standard) White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings as asked bye EIC/SIC/Site Engineer. Make: Jaquar, Hindware, Cera, Kohler, Somany
5
-
6900
The scope includes Providing and fixing SS towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 grams. Make: Jaquar, Hindware, Cera, Kohler, Somany. Any Screws, fittings, etc. accessories are included in this scope. The scope also includes dismantling of any previously installed towel rails. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
5
-
3441.6
Providing and fixing CP BRASS/ SS/ PTMT Waste Coupling as asked by EIC/SIC/Site Engineer for wash basin and sink, of approved make, quality and colour.Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms. Any tools, tackles, material, labour, etc. required are included in this SOR.
30
-
3708
The scope includes Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes externally, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of EIC/SIC/Site Engineer. The scope also includes dismantling and proper disposal of old pipes wherever required as per direction of EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR. (25 mm nominal outer dia. Pipes).
50
-
22239
The scope includes Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes externally, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of EIC/SIC/Site Engineer. The scope also includes dismantling and proper disposal of old pipes wherever required as per direction of EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR. (50 mm nominal outer dia. Pipes).
20
-
19484.4
The scope incudes supply and installation of Polyethylene water storage tank with cover and suitable locking arrangement along with inlet and outlet valve of approved make (Sintex, plasto, astral, supreme) and as directed by Engineer in-charge. Any valves/pipes/tubes/fittings/latch/locks, etc accesories required are included in this scope. The scope also includes dismantling of old tanks and its accesories as asked by EIC/SIC/Site engineer. All usable items shall be stacked at designated location and unusable / scrap/waste material shall be disposed off beyond 2 km from GAIL Premises. Any tools, tackles, material, labour, etc required are included in this SOR.
3000
-
34920
Providing and fixing Square shape up to 450x450 mm precast R.C.C. manhole cover/Precast MS/Iron manhole cover with frame - Light Duty cover capable of withstanding 2.5MT/25kN of load. Any tools, tackles, material, labour, etc required are included in this SOR.
10
-
6900
Providing and fixing Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Any tools, tackles, material, labour, etc. required to complete the job as per satisfaction of EIC/SIC/Site Engineer are included in this SOR.
5
-
12231.3
Providing and fixing Aluminium hanging and wooden floor door stopper with twin rubber & stopper of approved quality. Any tools, tackles, material, labour, etc. required to complete the job as per satisfaction of EIC/SIC/Site Engineer are included in this SOR.
30
-
1440
The scope includes Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Make: Jaquar, Hindware, Cera, Kohler, Somany. Any Screws, fittings, etc. accessories are included in this scope. The scope also includes dismantling of any previously installed mirrors. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
16933.8
The Scope Includes Cleaning of existing surface using scrapper, wire brush, amrey paper, Sand paper, buffing machine etc. to remove existing painting/putty/loose materials etc. and then Providing & Applying Plaster of Paris punning minimum 2 mm thick (nominal) on walls & minimum 2 mm thick on ceiling and directed by EIC/SIC/Site Engineer. The scope also includes levelling and smooth finishing of the surface by rubbing post applying the POP/Putty. Further, post applying the POP/Putty, the scope also includes application of 01 coat of primer without any additional cost implication. Every step shall be checked by GAIL Site engineer/SIC. In case any defect/flaws observed, Rectification of the same shall be done by contractor without any additional cost implication to GAIL. Any tools, tackles, material, labour, etc. required are included in this SOR.
100
-
25716
The scope includes Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rail plugs etc., complete. Any Screws, fittings, etc. accessories are included in this scope. The scope also includes dismantling of any previously installed shelfs. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
30
-
33917.4
Providing and Fixing of CP brass bib cock/ stop cock/ angle cock /Pillar cock/2-way bibcock of approved quality 15 mm nominal size. The scope includes removal/dismantling of old taps/bibcocks/valves/ fittings etc. and supplying and installation of bib cock/ stop cock/ angle cock /Pillar cock/2-way bibcock of approved make, model and quality i.e., Jaquar, Hindware, Kohler, Cera in SS/Silver/chrome finish as directed by EIC/SIC/Site Engineer. Wall mounted/Washbasin mount etc as asked by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR.
25
-
18317.75
The scope includes removal/dismantling of old taps/bibcocks/valves/ fittings etc. and supplying and installation of CP brass/SS long body bib cock of approved make, model and quality i.e., Jaquar , Hindware , Kohler , Cera in SS/Silver/chrome finish as directed by EIC/SIC/Site Engineer. Wall mounted/Washbasin mount etc as asked by EIC/SIC/Site Engineer. The weight of long body bib cock shall not be less than 690 grams and bore size shall not be less than 15 mm. Further, its length from wall/entry bore to centre point of exit bore shall not be less than 140 mm. Any tools, tackles, material, labour, etc. required are included in this SOR.
20
-
19119
The scope includes supply and installation of overhead shower complete with all brand new fittings etc. Make/Model Jaquar , Hindware, CERA , Somany, Kohler . Any connecting pipes, fittings, SS Tubes etc. accessories are included in this scope. The scope also includes dismantling of any previously installed faucets/shower and accessories. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed of beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
15469.6
Supplying of CP Brass Mixer TAP. The mixer tap must be along body tap/ swine neck with length not less than 145 mm from fixture to centre of outlet hole. The weight of mixer tap shall not be less than 690 grams. The mixer bore size shall not be less than 15 mm. The SOR also includes painting of accessories/ fittings and brackets, cutting and making good the walls wherever required. Approved make Jaquar, Hindware, Kolher, Cera, Somany. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
31339.3
The scope includes Providing and fixing minimum 8 mm dia C.P. brass / S.S. Jet with flexible tube of minimum 1 metre long with S.S. triangular plate to European/Indian type W.C. of quality and make as approved by Engineer - in - Charge. Make: Jaquar, Hindware, Cera, Kohler, Somany. Any connecting pipes, fittings, SS Tubes etc. accessories are included in this scope. The scope also includes dismantling of any previously installed health faucets. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed of beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
10853.5
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete for wooden doors. Any tools, tackles, material, labour, etc required are included in this SOR.
10
-
9810
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarsesand) and a coat of neat cement, rounding the edges and making andfinishing the outlet complete. Any tools, tackles, material, labour, etc required are included in this SOR.
20
-
6398.4
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. Any tools, tackles, material, labour, etc. required are included in this SOR.
70
-
49186.2
Providing Hydraulic Excavator of 1 cum bucket (JCB) along with its operator to carry out job as directed by EIC/SIC/Site Engineer.
5
-
4800
The scope includes completely emptying the soak pit / septic tank / chambers / manholes / sewer line using suction jetting machine. Post emptying the sewer waste, the soak pit / septic tank / chambers / manholes / sewer line should be cleaned with fresh water with jet pressure. The scope includes cleaning of the lines if the lines are chocked. 1 man day shall be measured/counted when all the soak pits, chambers, septic tank, manholes, sewer lines as directed or asked by EIC/SIC/Site engineer of either GAIL Vihar colony Abu Road or IPS Abu Road or both are cleaned as mentioned above. Measurements shall not be done according to the number of rounds/total days taken by machine/tanker. Decision of EIC/SIC shall be final and binding in this regard. All wastage shall be disposed off beyond 5 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
1
-
48000
The scope includes deployment of resources for misc. /unforeseen works as per the requirement raised by GAIL EIC/SIC/Site Engineer which cannot be measured. The resources deployed shall carry all required tools and tackles for the assigned work for which they are deployed. Under this scope, if any material is required separately for the work assigned, other than the tools and tackles, same shall be provided separately. The resource deployment shall be as follows: Deployment of skilled resource/mason/carpenter/plumber etc. as detailed above as per requirement of GAIL
200
-
179760
The scope includes deployment of resources for misc. /unforeseen works as per the requirement raised by GAIL EIC/SIC/Site Engineer which cannot be measured. The resources deployed shall carry all required tools and tackles for the assigned work for which they are deployed. Under this scope, if any material is required separately for the work assigned, other than the tools and tackles, same shall be provided separately. The resource deployment shall be as follows: Deployment of unskilled resource/helper/beldar etc. as detailed above as per requirement of GAIL
250
-
193500
Miscellaneous Extra jobs which are not covered in the above mentioned scope of work and which may be required in future any unexpected or contigent nature of job.
100000
-
120000
AMC CIVIL AT SV/IP STATIONS UNDER ABU ROAD
-
-
-
The Scope of work includes the complete job of earth work with Excavation jobs by manual/mechanical/Hydraulic means in all type of soil/rocks/surface/land etc. minimum 300 mm deep or as per drawing or as directed by EIC/SIC/Site Engineer .The scrap generated and the excavated soil/extra unusable items/stones shall be removed from the site & disposed off beyond 2KM. of GAIL site. Any tools, tackles, material, labour, etc. required are included in this SOR
50
-
12327
EARTh FILLING: Filling available excavatred earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20 Cm in depth. Consolidating each deposited layer by ramming and watering lead upto 50 M and lift upto 1. 5 M.
50
-
15237
The Scope of work for surface dressing includes complete removal of trees/vegetation/herbs/algae/waste etc. to prepare the surface /ground for proper work/PCC/RCC. All the waste/ scrap/ unusable materials are to be disposed off beyond 2 KM from Gail site. Any tools, tackles, material, labour, etc. required are included in this SOR
1000
-
33780
Scope of work includes supply and laying of position cement concrete/RCC of specified grade in ratio of
1:2:4 or 1:1.5:3 or any other specified mix by EIC (1 cement : 2/1.5 coarse sand : 4/3 graded stone
aggregate 20 mm nominal size) below and upto plinth levels and above plinth levels upto 5th floor.
The scope also include proper compaction of loose soil prior to the laying of concrete with proper shape
and size as per drawing details or/and as directed by the EIC/SIC/Site engineer. Disposal of scrap
/unusable material beyond 2 KM from GAIL Site shall also be in the scope of this SOR. Any tools,
tackles, material, labour, etc. required are included in this SOR. The cost of centring and shuttering is not
included in this item
10
-
88381.8
Scope of work includes supply and laying of position cement concrete of specified grade in ratio of 1:3:6
or 1:4:8 or as specified by the EIC (1 cement : 3/4 coarse sand : 6/8 graded stone aggregate 40
mm nominal size) below and upto plinth levels and above plinth levels upto 5th floor. The scope also
include proper compaction of loose soil prior to the laying of PCC with proper shape and size as per
drawing details or/and as directed by the EIC/SIC/Site engineer. Disposal of scrap /unusable material
beyond 2 KM from GAIL Site shall also be in the scope of this SOR. Any tools, tackles, material, labour,
etc. required are included in this SOR. The cost of centring and shuttering is not included in this item.
15
-
113868.9
The scope includes Providing Centering and shuttering including strutting, propping, bracers, etc. and removal of form for :Suspended floors, roofs, landings, balconies and access, platform, Shelves (Cast in situ),ground, Foundations footings, bases of Columns etc. at all levels as directed by EIC/SIC/Site Engineer. Shuttering oil must be used on shuttering material during casting work. Any tools, tackles, material, labour, etc. required are included in this SOR
50
-
18477
BRICK WORK IN Foundation & superstructure : Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :With Modular bricks. Bricks shall be free from cracks and flaws and nodules of free lime. Bricks shall have smooth rectangular faces with sharp corners. Bricks shall be uniform in colour. The Scope also includes cost of transportation of the bricks from manufacturer to the GAIL Site.
10
-
93775.8
The scope includes Providing and laying "Half brick masonry with bricks of class designation 75 or better in foundation and plinth & superstructure in Cement mortar 1:4 (1 cement: 4 coarse sand)" FPS non modular bricks. Bricks shall be free from cracks and flaws and nodules of free lime. Bricks shall have smooth rectangular faces with sharp corners. Bricks shall be uniform in colour. The Scope also includes cost of transportation of the bricks from manufacturer to the GAIL Site.
50
-
61089
Providing wood work in frames : Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs orwith dash fasteners of required dia & length . Sal wood, teak wood, Mahogany, Sagwan as directed by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required to complete the job as directed by EIC/SIC/Site Engineer are included in this SOR
0.5
-
64032.51
The scope includes Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Choukhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 grams) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e., depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Any Screws, fittings, latch, locks, and etc. accessories required are included in this scope The scope also includes dismantling of any previously installed doors/choukhat as directed by EIC/SIC/Site engineer. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR. (For Frame size 45 x 70 mm)
25
-
18967.5
The scope includes Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Choukhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 grams) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e., depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Any Screws, fittings, latch, locks, and etc. accessories required are included in this scope The scope also includes dismantling of any previously installed doors/choukhat as directed by EIC/SIC/Site engineer. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR. (For Frame size 65 x 100 mm)
25
-
30004.5
The scope includes Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type 30 mm thick door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Certificate from manufacture clearly mentioning the above parameters shall be submitted to EIC/SIC/Site engineer. Any Screws, fittings, latch, locks, door handle etc. accessories required are included in this scope. The scope also includes dismantling of any previously installed doors/choukhat as directed by EIC/SIC/Site engineer. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
47448
Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.
5
-
7758.3
The Scope of work for Steel Structure includes providing and fixing of Steel Structure various section as per drawing and/or as directed by EIC/SIC/Site Engineer all Complete including straightening, cutting, bending, placing in position, binding, riveting, bolting, welding, hoisting, fixing etc. as per drawing/directions provided by EIC/SIC/Site engineer. The scope also includes to remove all loose particles for and apply primer to get smooth finish for all steel structure section. Any tools, tackles, material, labour, etc. required are included in this SOR. Approved make of Steel: TATA, JSW, JINDAL, MANGALAM, and SAIL.
100
-
11166
The scope includes supply of Steel Reinforcement for RCC work including straightening, cutting bending, placing in position, C/W/G etc. all complete at all levels as directed by EIC/SIC/Site Engineer using TMT bars of grade Fe-500D or better of size as directed by EIC/SIC/Site Engineer. Approved Make: TATA Tiscon, JSW Neosteel, SAIL, Kamdhenu Nxt, Jindal Panther. Any tools, tackles, material, labour, etc. required are included in this SOR.
150
-
16137
The scope includes proper raking & hacking of the wall surface to make it suitable for plastering and then preparation of 1:6 (1 cement: 6 fine sand) ratio or better cement mixture as directed by EIC/SIC/Site Engineer and applying the plaster which shall be minimum 12 mm thick. Further, post plastering, proper curing has to be done minimum twice a day for minimum seven days. The scope also includes proper stacking of serviceable items at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR.
200
-
67680
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. The scope includes cleaning & preparation of the surface for painting. Further The scope includes minor crack repairing, hole filling of walls/projection/any exterior surface etc using putty/white cement/matching pigment including applying additional coats wherever required to achieve even shade and colour - minimum Two coats or more coats (if required for even shade). Any tools, tackles, material, labour, etc. required are included in this SOR.
2000
-
267840
The Scope Includes Removing dry,oil or water bound distemper, white or colour wash or any paint (which may be emulsion, acrylic, putty, Enamel etc. any type of paint) by scrapping and sand papering and preparing the surface smooth including necessary minor repairs with putty etc. complete Rate is inclusive of necessary scaffolding, labour and all materials required to complete the work. Any tools, tackles, material, labour, etc. required are included in this SOR.
4500
-
112590
Wall painting with plastic emulsion paint of approved brand and
manufacture to give an even shade: One or more coats on old work
2500
-
272550
Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)
200
-
20772
The scope includes Demolishing /Dismantling of existing brick work including its PCC,CC, Plaster, other such items etc. as directed by EIC/SIC/Site Engineer. The scope also includes proper stacking of serviceable items such as bibcocks, sink etc. at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
14875.2
Aluminium work : Providing and fixing aluminium work for doors , windows ventilators and partitions with extruded built up standard tabular sections /appropriate Z sections and other sections of approved make conforming of IS:733 and IS:1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitred and jointed mechanically for glazing/panelling including cleat angle. Aluminium snap beading for glazing/panelling, C. P. Brass/Stainless Stekk screws, all complete as per architectural drawings amd the direction of EIC. (Glazing and panelling to be paid for separately) For shutters of doors, windows & Ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket requried (Fittings shall be paird for separately). Powder Coated Aluminium (minimum thickness of powder coating 50 microns). Any tools, tackles, material, labour, etc. required are included in this SOR.
100
-
55956
The scope includes Demolishing /Dismantling of RCC including cutting/demolishing of its reinforcement bars., PCC, Plaster,etc. as directed by EIC/SIC/Site Engineer. The scope also includes proper stacking of serviceable items such as bibcocks, sink etc. at the designated place and disposal/removal of other scrap/unserviceable material out of the Gail Premises beyond 2 Kilometre range. Any tools, tackles, material, labour, etc. required are included in this SOR.
5
-
13971.3
The scope includes Providing and fixing SS soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms or Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms as asked by EIC/SIC/Site Engineer. The scope also includes dismantling of old fittings, dish holder, soap holder/container, SS plates and its accesories and other accesories etc. as asked by EIC/SIC/Site engineer. All usable items shall be stacked at designated location and unusable / scrap/waste material shall be disposed off beyond 2 km from GAIL Premises. Any tools, tackles, material, labour, etc required are included in this SOR.
20
-
2322
Floor painting with floor enamel paint Two or more coats of approved brand and manufacture of required colour to give an even shade as asked by EIC. Any tools, tackles, material, labour, etc required are included in this SOR. Make: Asian, Berger, Nerolac
100
-
15774
The scope includes Cleaning of terrace/loft water storage tank (inside & outside surface area) of 1000 litre capacity or more as decided by EIC (for more than 1000 litre, suitable measurement corrosponding to the ratio shall be paid) at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer in- Charge. (The old date already written on tank should be removed with paint remover or black paint) (If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). All non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc required to complete the job as directed by EIC/SIS/Site Engineer are included in this SOR.
10
-
5370.2
The scope includes Cleaning of terrace/loft water storage tank (inside & outside surface area) of 500 litre capacity or more as decided by EIC (for more than 500 litre, suitable measurement corrosponding to the ratio shall be paid) at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer in- Charge. (The old date already written on tank should be removed with paint remover or black paint) (If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). All non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc required to complete the job as directed by EIC/SIS/Site Engineer are included in this SOR.
10
-
3905.7
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.With float glass panes of 4.0 mm thickness (weight notless than 10kg/sqm). Any tools, tackles, material, labour, etc. required are included in this SOR
30
-
36712.8
Repair of aluminum doors : Repair & maintenance of aluminium doors (Pivot and floor spring) for smooth opening & closing of door. The scope includes replacement/repairing of the rubber /Neoprin gasket , door handles, magnets, locks, latches etc as asked by EIC/SIC/Site Engineer. The scope includes checking and resolviong the allignment of the aluminium door. Any tools, tackles, material, labour, etc. required are included in this SOR
20
-
5858.6
Providing and Fixing of CP brass bib cock/ stop cock/ angle cock /Pillar cock/2-way bibcock of approved quality 15 mm nominal size. The scope includes removal/dismantling of old taps/bibcocks/valves/ fittings etc. and supplying and installation of bib cock/ stop cock/ angle cock /Pillar cock/2-way bibcock of approved make, model and quality i.e., Jaquar, Hindware, Kohler, Cera in SS/Silver/chrome finish as directed by EIC/SIC/Site Engineer. Wall mounted/Washbasin mount etc as asked by EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
7327.1
The scope includes removal/dismantling of old taps/bibcocks/valves/ fittings etc. and supplying and installation of CP brass/SS long body bib cock of approved make, model and quality i.e., Jaquar , Hindware , Kohler , Cera in SS/Silver/chrome finish as directed by EIC/SIC/Site Engineer. Wall mounted/Washbasin mount etc as asked by EIC/SIC/Site Engineer. The weight of long body bib cock shall not be less than 690 grams and bore size shall not be less than 15 mm. Further, its length from wall/entry bore to centre point of exit bore shall not be less than 140 mm. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
9559.5
The scope includes Providing and fixing minimum 8 mm dia C.P. brass / S.S. Jet with flexible tube of minimum 1 metre long with S.S. triangular plate to European/Indian type W.C. of quality and make as approved by Engineer - in - Charge. Make: Jaquar, Hindware, Cera, Kohler, Somany. Any connecting pipes, fittings, SS Tubes etc. accessories are included in this scope. The scope also includes dismantling of any previously installed health faucets. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed of beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
10
-
10853.5
The Scope includes Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard approved make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with approved make ISI marked white solid plastic seat and lid. Make: Jaquar, Hindware, Cera, Kohler, Somany. Any connecting pipes, fittings, SS Tubes etc. accessories are included in this scope. The scope also includes dismantling of any previously installed WC Pans. All usable materials shall be stacked at a designated place and non-usable items/scrap shall be disposed off beyond 2 km of GAIL Premises. Any tools, tackles, material, labour, etc. required are included in this SOR.
5
-
33243.3
Supply and installation Toilet Flush Tank (Standard) White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings as asked bye EIC/SIC/Site Engineer. Make: Jaquar, Hindware, Cera, Kohler, Somany. Any tools, tackles, material, labour, etc. required are included in this SOR
10
-
13800
Providing and fixing suspended False Ceiling largely in Glass Fiber Reinforced Gypsum board and partly in plaster of paris. (Plaster of Paris shall be used in moulded and curved surfaces). Gyp board suspended ceiling includes providing and fixing GI grade 175 (120 g / m 2) perimeter channels (20 x 30 x 27 x 0. 50mm thick) along-with perimeter of the ceiling, screw fixed to brick wall / partition / RCC work with the help of nylon sleeves & screws, at 610mm centers. Then suspending G. I grade 175 (120 g / m 2) intermediate channels (45 x 15 x 15 x 0. 9mm thick) and fixing to the intermediate channels with help of connecting clips & in direction perpendicular to the intermediate channels at 457mm centers. Not less than 12. 5mm taper edge Gyp board (confirming to I. S. - 2095 - 1982) shall be then screw fixed to the ceiling section with 25mm drywall screws at 230mm centers. Screw fixing to be done mechanically either with screw driver or drilling machine with suitable attachment. Boards to be jointed & finished so as to have a flush look which includes filling & finishing the taper & squared edges of the board with jointing compound and fiber tape. Any tools, tackles, material, labour, etc. required are included in this SOR
30
-
41254.2
The scope includes Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes externally, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of EIC/SIC/Site Engineer. The scope also includes dismantling and proper disposal of old pipes wherever required as per direction of EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR. (For 25 mm nominal outer dia. Pipes).
50
-
22239
The scope includes Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes externally, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of EIC/SIC/Site Engineer. The scope also includes dismantling and proper disposal of old pipes wherever required as per direction of EIC/SIC/Site Engineer. Any tools, tackles, material, labour, etc. required are included in this SOR. (For 50 mm nominal outer dia. Pipes).
50
-
48711
The scope includes Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour &60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Complete all as per direction of Engineer-in-Charge. The scope also includes doing PCC wherever required or as per direction of EIC/SIC/Site engineer prior laying of the paver blocks for providing hardness to the soil surface. Any tools, tackles, material, labour, etc. required are included in this SOR.
70
-
63588
Providing and fixing Aluminium hanging and wooden floor door stopper with twin rubber & stopper of approved quality. Any tools, tackles, material, labour, etc. required to complete the job as per satisfaction of EIC/SIC/Site Engineer are included in this SOR.
100
-
2400
The Scope Includes Cleaning of existing surface using scrapper, wire brush, amrey paper, Sand paper, buffing machine etc. to remove existing painting/putty/loose materials etc. and then Providing & Applying Plaster of Paris punning minimum 2 mm thick (nominal) on walls & minimum 2 mm thick on ceiling and directed by EIC/SIC/Site Engineer. The scope also includes levelling and smooth finishing of the surface by rubbing post applying the POP/Putty. Further, post applying the POP/Putty, the scope also includes application of 01 coat of primer without any additional cost implication. Every step shall be checked by GAIL Site engineer/SIC. In case any defect/flaws observed, Rectification of the same shall be done by contractor without any additional cost implication to GAIL. Any tools, tackles, material, labour, etc. required are included in this SOR.
100
-
25716
Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge. Any tools, tackles, material, labour, etc. required are included in this SOR.
50
-
324429
The scope includes deployment of resources for misc. /unforeseen works as per the requirement raised by GAIL EIC/SIC/Site Engineer which cannot be measured. The resources deployed shall carry all required tools and tackles for the assigned work for which they are deployed. Under this scope, if any material is required separately for the work assigned, other than the tools and tackles, same shall be provided separately. The resource deployment shall be as follows: Deployment of skilled resource/mason/carpenter/plumber etc. as detailed above as per requirement of GAIL
50
-
44940
The scope includes deployment of resources for misc. /unforeseen works as per the requirement raised by GAIL EIC/SIC/Site Engineer which cannot be measured. The resources deployed shall carry all required tools and tackles for the assigned work for which they are deployed. Under this scope, if any material is required separately for the work assigned, other than the tools and tackles, same shall be provided separately. The resource deployment shall be as follows: Deployment of unskilled resource/helper/beldar etc. as detailed above as per requirement of GAIL
100
-
77400
Miscellaneous Extra jobs which are not covered in the above mentioned scope of work and which may be required in future any unexpected or contigent nature of job.
75000
-
90000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%