Forest Department Tender

Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in : Cement Mortar 1:4 ( 1-Cement : 4-Sand). Total work - 1.55 cum

Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. SLAB S-1 total work = 3.18 sqm

Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix S-1 total work = 1.29 cum

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) Slab = Top 22.120 kg, Bottam 23.226 kg total work 45.346 kg

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) 1501 Cm2 to 3600 Cm2 Tiles

Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work= 11.20 mtr

Supplying and fixing at site, single piece solid stone element/statue/sculpture made out by carving work in first class (Superior class) BANSWARA-WHITE Marble stone free from cracks, flaws & stains etc. with additional/required carving work on stone element for Cladding/Arches/Pillar/ Jali/Chataries/Dassa/Chajja/ Dome/Flooring including Planning, developing, making base, carving work (Up-to 25 mm deep carving work), polishing, all loading-unloading, transportation, scaffolding all heights, hoisting, installation with all required T&P (including white cement, pigment, Chemical, SS clamps and fasteners of approved brand etc.), fixing over/on base/surface as per shape -size & placement of approved drawing , finishing, surface treatment etc. covering properly till the date of opening/inauguration of site etc. The stone should be pre/post -treated with suitable chemical polish for maintaining original colour and Ceramic surface treatment to be done to avoid surface staining & effect of external weather condition, pollution & dust etc. Proto type model of element/statue/ sculpture (fiber glass or plaster of Paris) may also be required of same shape, size and detailing, for which nothing be paid extra. Preferably, the single piece stone block shall be used for the particular element/statue/ sculpture but if not possible, material from the same block/lot of stone, shall only be used for similarity & fine n hair line pasting/jointing shall be done with suitable material in such a way so that joint(s) be not visible from front site. Complete job in all respect including in-lay work if required, as per approved design & drawing under approval of project consultant, appointed for the project & as per directions of Engineer-In-Charge. (Theme, concept plan, schematic arrangement, other relevant details and drawings of element/statue /sculpture are enclosed .The final drawing shall be provided after award of the work.) Note: Payment shall be made in Sqm, largest O/O dimension of a finished product (element/statue/sculpture). Other masonry, concreting, steel reinforcement plastering etc. required shall be paid extra but metallic items such as copper/bronze/gunmetal pipes, nozzles etc of approved make etc., conduiting for water pipe line, electric line etc. or hole of desired shape n size, required for fixing/installation or structurally etc. in any element shall be inclusive in the rate. 50 mm to 75 mm Thick TIGER = 5.60 SQM