Food Craft Institute Tender

Chairs wooden upholstered 1. Teak wood structure 2. Total height:800mm, depth:457, width:457, Height of seat from base: 457 3. Seat to be foamed and uphostered of 40 mm thick Kurlon foam. 4. Leg : 38x50 mm

Side board 4x1.5x48h 1. Overall size (LxWxH):1220x457x914mm 2. Splash guard: 127 3. 2 Open cages of 304 x114x127 on the RHS 4. Teak wood structure 5. 18 mm dense ply board of ISI mark 303grade covered with postform mica. 6. 3 drawers with lock and handle: Lx HxD-609x 203x457 7. 2 shelves in the RHS with single partition. Size of one shelf-LxHxD: 609x 304x457 8. 2 shelves in the RHS with single partition.Size of one shelf-LxHxD: 609x 304x457, dulycovered with lockable door and handle. 9. Baze cloth inside the drawers and itspartition 10. Caster Wheels of 76 mm on one side (width side) 11. GC=76 mm

FOLDING BUFFET TABLE (RECTANGULAR) 1. Size: 1800X760X760 2. 18 mm dense ply board of ISI mark 303 grade for the top without lamination and plain wooden beading. 3. Supported by 25 mm MS steel 202 square pipe 18 swg 4. Powder coated

Back bar with display 1. Main Structure: teak wood 2. Covered by 18 mm dense plywood with post form mica on all sides 3. PVC beading on the edges. 4. Back side dimension :height 2438x width 2133 5. Table size(LxBxH):2133x 487x914, edges 50 on rhs and Lhs, 6. Lockable Drawers-3 nos on the upper front side, height 304. 7. Drawer on the lower front side- 3 nos :height , with a partition in the middle,height till the base covered, lockable doors 8. Blaze cloth a inside the drawers 9. White .8 mm mica on the lower drawers 10. Table top with 12 mm toughened glass duly 11. dimension: three partitions 480 mm widthvertically on both sides , middle partition=944 mm 12. Depth of partition: 152 13. Side partitions are again partitioned with 18mm glass – 3 equal partitions 14. Middle partition at a height of 508 from thebase made up of 18 mm glass 15. Supporters to be used for supporting the glass should be of stainless steel. 16. Inner wall of the showcase to be fixed with 6 mm mirror glass Canopy/hood 17. To extend to 914 mm from the wall halfoval shape with border edges of 152mm 18. Inner walls fitted with white coloured micaof .8 mm 19. LED Spot lamps provision ;10 nos 20. Glass hangers :06 nos (u shaped)

BAR STOOL WITH HANDLE AND BACK REST 1. Overall height of the chair: LxBxH: 427x427x1220 2. 202 SWG SS frame work 3 inch dia. main tube with circular base having rubber padding 3. Foot rest at a height of 304 from base, protruding outside 4. Seat height : 838 mm 5. Back rest height: 28 6. Seat with 2 mm dense ply wood with 50 mm cushion

Sofa set 1800x600mm 1. Three seater- 1800mm-(W) x 800mm (D) x 720mm (H) and seat height 380mm, Arm height 510mm 2. Sofa structure is to be made of 45 x 28mm finished teak wood section, the structure shall be provided with flat helical spring. 3. Seat : Sofa seats is t6 be made with 90mm thick 40 density foam with toping of 20mm 4. super soft foam. 5. Back : Back is to be made with 45mm thick 32 density foam with toping of 20mm super soft foam. 6. Arm : Arm shall be made of 95 x 28mm wood section front back and top. Sidefacing wooden ply of 75 x 25mm section is to be provided. Side arms are to be provided with 20mm thick 28 density foam cushion on both side. 7. Sofa front : Sofa front is to be covered with 20mm thick 28 density foam. 8. Tapestry : Good quality tapestry of market rate approx. 400/- per meter is to be used on sofa sets as per approved colour. 9. Wood : Defect free teak wood. 10. Polish : Malemine of approved colour.

Coffee Table 900x450mm

Table (for Principal office) 2400x900mm Overall size : 2100 Lx 1050 W x 750 H (mm) (Light semi-circular) 1. Structure: ply ISI 303 grade 2. Top : Covered with 18mm thick ply 303 grade ISI duly laminated with bull nose finish on length wise of top edge. 3. PVC beading on all the edges of 2 mm thick. Mobile pedestal : 4. Made of 18mm plywood duly laminated with postform finish. 5. Three vertical lockable drawers on the RHS of matching colour duly run on telescopic channel of Ebco make Returning Unit : 1. Size 900 Lx 400 W x 700H mm made of 18 mm ply board with top 1.5 mm mica 2. One drawer and cabinet on one side with keyboard tray run on telescopic channel drawer & cabinet , Ebco make 3. Front panel shall be membrane finish with multipurpose lock and back side of RTU laminated. 4. Glass Top : 8 mm duly polished

Executive Chair (For Principal office) 24”x24”x42”

VIP Chairs Over all Dimension : W535xD595xH820mm 1. Seat height 460mm. Seat size: 420 x 420mm approx. 2. Back size: 420(W) x 270mm (H) approx. 3. Material: The seat and back shall be made up of l0 mm thick hot pressed water commercial plywood, upholstered with fabric and moulded polyurethane foam (4Omm thick with density 40-50). 4. Tubular Frame: The main frame shall be cantileve type reinforced at the bends to give cushioning effect and added strength and made of dia 25mm x 1.8mm to 2.0mm MS tube. 5. Tubular Armrest: Shall be made in twin tube form and made from dia 16mm x 1.6mm MS tube. 6. Finish: All steel components shall be Epoxy powder coated after seven tanks anti corrosion; retreatment of surface

Office tables Size-LxWxH: 1800x900x750 1. Structure made of 18 mm ISI make Ply 303 grade 2. Covered on three sides by 18 mm dense anti-termite plywood , with 2 mm thick PVC beadings 3. 3 vertical lockable drawers on both sides 4. Key board tray of Ebco make 5. Provision of computer cable hole on LHS

Office chairs 460x460x900mm 1. Seat Height:- 450mm 2. Seat Size:- 430 x 450mm Back size :430 x 170mm - netted 3. The structure to be made with 25 mm tubular MS steel pipes with powder coating 4. PVC/ Plastic handle 5. Seat cushion 70 mm and back 45 mm 6. Legs with nylon bullets

File index drawer H1320*W460*D620mm

Computer tables 900x600mm 1. Wall sided table : 610x7620 mm and 610 x 4572 mm (wall mounting) 2. Central table : 915x4572 mm two tables with a 152 mm height partition in lengthwise in the centre 3. Tables to be made with dense plywood of 18 mm 4. Slide drawer at equal distances of 762 mm for placing key board 5. Foot rest shelf at height of 152 mm from the surface 6. Wooden beading on all the sides 7. Postform mica on all the sides 8. Provision of holes for wires for each computer

Computer chairs Seat Material : FABRIC Back Material : NYLON MESH Seating Height : 17" H Back Size : Total Height : Overall Dimension : 24

Three seater steel chair 1800x600mm

Podium 1. Size:(L x B x H): 609x508x1067+6-3" glass tower with inclination 2. Made from 18mm dense plywood of ISI mark 303 grade covered on all sides with postform mica. Having 12mm Toughened glass shelf of 8 mm from top inclined towards back side. Inclination of 64 mm 3. College logo on the front side embossed on the SS sheet . 4. LOGO Size: 450mm x 450mm. Wheels of 2 inch on the widthk side of the Podium. 5. A single shelf of height 304 mm 6. Colour : Brown

Steel cup board Specification: - Size: H1850*W900*D400mm - Color:Customized Color - Specific Use: Filing Cabinet - Material: stainless steel - Thickness: 0.4-1.2mm

Filing cabinet 4 drawer 22" Deep 4-Drawer Letter-Size Commercial Vertical File • Commercial vertical 4 drawer letter filing cabinet • Letter Size • Precision steel ball-bearings provide the ultimate in smooth and quiet drawer performance • High-side drawers accept hanging file folders

Store keeper table 1200X900 mm.

Chair

File Rack

Slotted angle racks 18”x36”x78”

Receiving platform

Aluminum platform

Storage bin Specification mm: DxH : 315 x450 1. 18 SWG, SS304 2. 350 mm fine perforation in the middle of the wall

Onion potato storage bin

Catalogue System

Librarian chair & Table 1200x600mm

Rotary Magazine Stand 1. SS 304 16 swg pwdr finish 2. 75-80 racks magazine holder 3. 360 degree rotation 4. Compartment size (WxDxH)220x25x184 5.Polished edges 6.Heavy base

Library Book Shelves Overall Size LxBxH: 1900x838x330 1. MS Sheet of 22 gauge 2. Door 20 guage with glass and lock 3. Rack opening – pull and fix upwards 4. Name plate display on each Door rack 5.Door handle 6. Duly pwdr coated 7. Silver white color

News Paper Stand Specification:1900x750mm 1. SS304. 18swg 2. Legs of 16swg 50mm

Magazine Stand Specification:1900x750mm 1. SS 304. 18 swg 2. Legs of 16 swg 50mm

Chair for student 1. Dimensions(mm):475W x 495D x 857H 2. Poly-plastic 3. Without handle

Library Tables Size:1800x900x760 1. Structure made of 202 MS rectangular pipe of 40x40 mm of 18 mm gauge 2. Topped with 18 mm dense water plywood of ISI mark 303 covered with postform mica and.8 mm belew the topof white color 3. PVC beading of 2 mm thickness 4. Adjustable nylone feet

White Board (1200x900 mm) 1. Size- 6x4 =4 nos (Class rooms) 3x4 =4 nos ( BTK,QTK,Larder, Library) 2. With fixed duster/marker stand

Teacher’s Platform(Wooden)

Teacher’s Chair

Teacher’s Table Size-LxWxH: 1500x900x750 1. Structure made of 18 gauge MS rectangular pipe of 50x25 mm 2. Covered on three sides by 18 mm dense anti-termite plywood , with 2 mm thick PVC 3. One lockable drawers on the right hand side of Ebco / Godrej make

Chairs with under shelve with writing board facility Width:20.5 in. Depth:28.75 in. Height:31 in. Weight:18 lbs. Connecting Device:Optional Desktop Edge Type:Self-edge Desktop Finish:High-Pressure Laminate Desktop Surface:13.5"W X 22"D X .625" Thick Frame Finish:Powder Coated Frame Specs:18-gauge Steel, .875" Dia Full-Size Back:Yes Glides:Heavy-Duty Glides Green Certification:MAS Certified LEED & CHPS Handing:Right and Left Handed Meets ANSI-BIFMA:Yes Pen Groove:No Qty of U-braces:2 Replaceable Leg Glides:Yes Seat Height:17" Seat Material:Steel Seat Size:15.25"W X 16"D Tablet Arm:Included Usage:8 Hours A Day V-shaped stability plugs:Yes Warranty:Limited Lifetime Weight Capacity:s480 Lbs.

Steel almirah with four shelves Size:- 600x1200x2100 mm

COLLAPSIBLE WIRE MESH STEEL BINS Size : 40 ½’’ x 34 ½’’ x 32’’ overall Height 900x900x660 1. Half drop gates on both 900 sides 2. Thick Wire mesh (9 gauge)-4sides 3. Sheet Metal Floor on Tubing Base Structure 4. Steel bin with Standard Zinc-Galv plated finish 5. Inter stackable with all other 900x900 Series standard steel Bins