Department Of Local Bodies Tender

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size).

Filling with locally available river sand at all levels including watering ramming consolidating and dressing complete including cost of sand.

Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m.

Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts.

Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Arches, domes, vaults upto 6 m span

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix)

Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion).

Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand)

Applying Birla / JK white cement based over cement plaster surface for making even surface.

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm).

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Neat cement punning

Supplying and fixing machine cut dressed 75 mm Pink sand stone (Bansi Paharpur) dasa/ coping with ornamental shape having moulding and "PAN Shape" engraving as per required pattern with engraving depth of 5 mm (average) in single piece of length 90 cm to be laid on cement mortar 1:4 (12 to 20mm thick) including pointing with admixture of pigment matching with the stone shade.

Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required.

Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12mm diameter anchoring steel bar 45 cm long fixed in each stone and supported on and including with bricks cove of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade: With bricks

Providing and fixing bansi paharpur stone ornamental stone chattri corisisting of base pillars, pillars, arch, chajja base carving work, assembling various componests of chattri and fixing the chattri to prepared base with jointing and pointing with white cement pigment matching with stone shade etc. complete as per approved drawing and direction of engineer in charges (elevation enclodes) (size of chattri 0.80mt x 0.80mtr & height 0.9mts will be considered from top of base plate to top of dome cap.

Providing & fixing & installation "Lion" statues (including 2 figure as per enclosing drawing) made by the specified artis administration, in accordance with architect of the project cost of statue, including transportation & installation complete in all respect (made of cement concrete and wire reinforcement with fibre polly resin marble dust) as per attached drawing and direction of engineer in charge contractor shall prepare prototype modle before execution statue work shall be started after fanalisation of model size of statue shall be about 5 ft in length, 2 0 ft in width and 2.5 ft height sizes may be very by 1 ft in length or as per direction of engineer in charge and consultant at the time of execution.

Metallic paint is a thermoplatic-acrylic solbvent-based paint which ca be applied onto cement statues to provide a metallic effect finng remove all loose powdery residues, loose chalk, dust and foreign matter, repair craks uneven surface with multi purpose joint compound or suitable fillers, smoothen the putt/filler areas with sand paper, surface to be painted must be cleaned thoroughly and ry, it must be free from dirt, grease and toher foireing matters, allow all surface to dry completely prior to painting avoid painting when the mointure contant and alkalinity of the walls are still high, (recommeded panting specification requers the moisture contant of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9) sopot prime with Hydro primer and Aquatec 1900 red oxide primer, Is is formulated for easy application by roller and bursh providing across the substrate, giving a somooth finish