Border Security Force Tender

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (a) 2 X 16 sq. mm (22 mm)

(b) 2 X 25 sq. mm (22 mm)

(c) 3.5 X 35 sq. mm (32 mm)

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. (a) Above 4.5 meter and upto 6.5 meter

Providing and making steel pole collar with cement concrete (01 cement : 3 coarse sand : 6 stone aggregate 20 mm) of specified size and shape including form work, plastering if required, curing etc. as required. (volume of pole/ pipe not to be deducted)

Supplying and embedding of 32 mm dia dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent /LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering upto 35 Sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct / along pole / loose for connections etc as required .(a) Upto 35 sq. mm

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. In all kinds of soil (for foudation of pole)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : Cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required 50 mm dia

Supplying & erection of 7 meter long Hot-dip Glavanised Octagonal security light poles with top 70 mm dia and bottom 130 mm dia made of 3 mm thick H T sheet Steel conforming to grade S 355 complete with G I base plate of size 220 mm (L) X 220 mm (B) X 12 mm thickness welded at the bottom of pole complete with 4 Nos 20 mm dia 700 mm long foundation bolts with double nut at top , washers, etc along with 1.0 meter long single side cross arm outer dia 42 mm confroming to EN 8 grade, including supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe for cable entry (from bottom of foundation to top of foundation for cable entry ), with inbuilt / Vandal resistance,weathproof electrical junction box having terminal blocks for looping in /looping out of cables, 6 A 'C' series MCB, din rail, connectors etc mounted on bakelite sheet for flush door having locking arrangement etc. as required as per manufacurer specification as mentined in NIT make crompton/Surya/utkarash or as per the direction/approved of Engg incharge

Supplying and fixing of 6 mtr long 65 mm dia G I pipe pole (medium duty), welded on G.I base plate of size 150 mmX150mmX06mm thick belded with GI pipe at bottom,earthing etc as required at site. Make Jindal/TATA/ Parkash Surya/ Hindustan or as per the direction/approved of Engg incharge

Supplying & fixing of PVC loop box having outside dia (295 x 255 x 120)mm and inside dia (250 x 200 x 100)mm with openable door fixed on hinged at right side of box along with 6 amp, 10 KA SP MCB mounted on din rail, and 30 Amp 4 way Bakelite connector double row black terminal fitted inside the box for the cable connection, accessories etc. mounted on G.I Pole etc as required. Make Sintex product code- GSB 2520 or equivalent in Hensel.

Installation testing and commissioning of 70 watt LED street light on existing bracket fixed on 07 mtr octagonal Pole including wiring with 3 x 1.5 Sq.mm FRLS Single core PVC insulated copper conductor (from loop box box to LED fitting), & making connection of LED street light luminaire etc. as required as per the direction/approval of Engg in charge.

Installation testing and commissioning of 30 watt LED street light on existing 06-07 mtr G.I Pole including including connection, testing etc as required as per direction of Engg in Charge

Rewiring of 6.0 Mtr long Street/Security light pole with 3x1.5 Sq. mm FRLS single core PVC insulated Copper wire including connection from loop end box to LED lights etc as required.

SITC of cubical type out door joint box having size 450 mmx 450 mmx 200 mm having doors on both side fabricated with 2.0 mm thick CRCA sheet mounted on 35 mm x 35 mm x 5 mm angle iron frame, having 600 mm long 04 nos leg stand erected in cement concrete 1 :3 :6 (1 cement :3 coarse sand : 6 graded stone 40 mm nominal size) foundation i/c excavation 30 Cm below the ground. The legs paint with primer and balck paint as required and consisting of following accessories. 04 nos aluminium bus bar strip suitable for 200 Amp current carrying capacity having size and also suitable space for Incoming and outgoing cable.

Fabrication supply installation testing and commissioning of outdoor type feeder piller, double door made out of 2.03 mm thick CRCA powdered coated sheet of size 600 mm (height) x 500 mm (width) x 200 mm deep having 200 amps, 04 nos insulated aluminium bus bars and to accommodate following accessories, front & back openable door, R-Y-B LED indicators and P & F of internal connection with suitable size of copper wires, following accessories & angle iron frame of size 500 mm x 200 mm with 600 mm long legs made out of 35mm x 35 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. (CPRI Approved builder) i) 63 Amps, 4 pole, 415 volts, 50 Hz MCCB make L&T/ Havells//Siemns/ABB - 1 No ii) 32 Amp, DP, MCB, 10 KA Breaking Capacity, C curve, 240 /415 V, 50 Hz make L&T/ Havells/Siemns/ABB- 04 Nos iii) Digital Multifunction meter (VAF + PF) make L&T Cat no. WC411011OOOO or equivalent in AE/Siemns- 01 Nos iv) Indicating lamp (LED type) 22.5 mm 230 volt AC Red, Yellow and blue make L&T/Havells/ simens- 03 nos v) CT Ratio (Amp) 100/05, accuracy class 1, burden 05 VA - make L&T/AE/Trinity -03 nos or as per the direction/approved of Engg incharge

Add GST difference Multification factor (0.0633) on DSR Items on Rs. 1395635.73