Bhiwadi Integrated Development Authority Tender

Double arm overhang

P&F of IP65 protected LED Street Light Luminaire on existing bracket. Fixture made of power coated single piece pressure dia cast aluminum with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (from 45W onwards) and should be secondary lens on each LED. The system lavelLuminaire efficacy =100 with High Power LEDs of CREE/NICHIA/OSRAM/PHILIPS/SEOUL Make is to be used. The LED Driver shall be BIS certified and Input Voltage AC 110 to 270 V AC with Input Frequency 50Hz+3% Power factor 0.95 Driver Efficiency 85%, THD (I)10% Humidity 10% to 90% RH working Temp – 20C to 50C. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% initial lumens maintained, Rendering index 75%. Surge protection shall be min5 KV internal and min 10 KV external. Manufactures word Mark/Name Engraved/Embossed on die cast housing to allow traceability/authenticity till life of fixture. Fixtures shall be CE complained. LED Street Light fixture 120 Watt. (Group-1)

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 x 1.5 sq.mm (Group-1)

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. Single pole MCB 0.5 A to 5 A rating (Group-1)

P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. (Armoured) (Group-1)

10.0 Sq.mm 4 core

35.0 Sq.mm 3.5 core

Add @ 350/- p.m. if Cable laid through Vernier Machine

Supply and installation of spike of M.S. rod 20mm dia 3.0mtr. long for earthing of (tower/pole) drive into earth by mechnical means sturcture connection the spike with cross arm top hamper PCC pole, lattics tower to earth etc. complete as per technical specification of DISCOM

S & Laying following size' B ' class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required 80 mm dia.

P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 75 mm dia

S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.

8 SWG G.I. ( Hot Dipped ) Wire

20mm x 3mm G.I. ( Hot Dipped ) Strip

SITC of high mast lighting system (as per CP3-TR7/1996 of ILE, UK) consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm, mast head frame assembly with full cover, aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, suitable ropes (AISI 316, 7 / 19 costruction ), EPR insulated PCP sheathed trailing cable, outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. ( See table E - 13 of Electric BSR 2013 for specs.) 20.0 Mtr Hm (in 2 section) (Group-1)

P & F of IP-65 protected high power LED flood light system with Pressure diecast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED fixture supplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85% and in compliance to IEC standards/BIS certified. The system level Luminaire efficacy =100 with High power LEDs of CREE/NICHIA/OSRAM/PHILIPS/SEOUL make is to be used. LED driver input voltage AC 110 to 270 V AC with auto resetting safety Cut-off. Input Frequency 50Hz+3% power factor0.95 Driver efficiency 85% control gear integral design, THD (I) 10% Electrical connector must be provided surge protection min =5KV internal and 10KV external in 80W onwords, humidity 10% to 90% RH working temp 20-C to 50C. LED luminaire specification: Life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintenance. Manufactures word mark/name engraved/embossed on die cast housing to allow traceability/authenticity till lift of fixture. Fixtures shall be CE complained. High Power LED Flood light 160W (Group-1)