Bharat Electronics Limited Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 2,46,803Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_BEL_96427_1Tender No
19555/3/16/PnS/PK-JodhpurTender Authority
Bharat Electronics Limited ViewPurchaser Address
-Website
http://http://www.bel-india.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
333
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms & lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
686
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials All kinds of soil
50
-
-
... More
Supplying good earth (to be brought from outside and got approved) including transportation to site, filling in the parking area and other low lying areas of the site, spreading and levelling to the required grade/level in layers not exc. 20 cms. In depth, breaking clods, watering and consolidating each deposited layer by using 8 Ton capacity road roller OMC as per requirement etc., complete. (Note: The quantity of earth supplied and filled shall be computed by taking initial levels of the ground and final levels of the compacted fill ).
10000
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
2000
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
982
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size).
58
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size).
34
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
2
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
81
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level Concrete of M30 grade with minimum cement content of 350 kg /cum
108
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All works above plinth level upto floor V level Concrete of M30 grade with minimum cement content of 350 kg /cum
99
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
2
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
257
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
648
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
225
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
61
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
75
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide
73
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges
3
-
-
... More
Making groove in plastered surface or moulding in CM 1:6 (1 cement :6 coarse aggregate) including curing, labour etc complete as directed by Engineer in charge.
258
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum
19
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum
8
-
-
... More
Providing Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more ( Basic price of Reinforcement Steel is considered as Rs 65.00 per Kg)
27948
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coats of Synthetic enamel painting all complete (Basic price of Structural Steel to be considered is Rs 70 per Kg)
8174
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
12
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in ll shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
45
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
13
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
13
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand)
6
-
-
... More
Providing and fixing 4mm thick aluminium composite panels of for external wall and column cladding as per drawing with necessary steel/wooden scaffolding in combination of solid / metallic colours including necessary frame work of size 50mmx50mmx2mm provided in vertical direction and horizontal direction complete Aluminium composit panel should consistof 3 mm thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5 mm thick aluminium sheet making a total panel thickness of 4mm. The surface will be finished with PVdF based coating on exterior surfaces and service coating on reverse side would be Polyester paint. The system shall be fixed using GI brackets or aluminium brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufacturer’s specification.Seating shall be done, using weather sealant of Dow corning 789 make with Baker rod etc complete. (Note:Shop drawing/fabrication drawing shall be furnished for approval before starting of the work. The area of ACP cladding as seen in elevation shall be measured for payment. Rate shall be inclusive of all other materials, necessry hardware, scaffolding, aluminium framework as per requirement and as per the specifications/drawing.)
50
-
-
... More
Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. 18mm thick
50
-
-
... More
Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer,cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-
24
-
-
... More
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)
10
-
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
5
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
38
-
-
... More
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
76
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
19
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5° 110 mm bend
8
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe (Plain) 110 mm Shoe
8
-
-
... More
Providing and fixing not less than 0.5 mm thick Track deck 1000mm wide Hi-Rib- 100 Galvalume high tensile cold rolled steel roofing sheets of Taurus blue or any other approved colour and in required lengths having a yield strength of 550 M Pa as per AS 1397 having Galvalume coating class AZ 150 (minimum 150 gm. per Sq. meter total zinc- aluminum alloy coating on both sides). The sheets shall be fixed to the purlins with suitable over laps in longitudinal and lateral directions and by providing Self fit fasteners along with EPDM washers and Polysulphide sealant as per manufacturers specifications including rain water gutters as per drawing,ridges, eaves etc. (Note- Actual area of sheets as laid only will be measured for payment.)
207
-
-
... More
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
549
-
-
... More
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
181
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)
109
-
-
... More
6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
194
-
-
... More
Providing and fixing GI hexagonal (Chiken) mesh in 2 layer on the old brick masonry work including necessary nails for fixing etc. all as specified and or as directed etc., complete.
47
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
387
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
587
-
-
... More
Lettering with black Japan paint of approved brand and manufacture
6300
-
-
... More
Providing and applying Two or more coats of Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, wall surfaces to be prepared by scraping away any loose particles, dust, etc., by washing and scrubbing and 1 coat of primer approved by manufacturer. The wall surfaces are smoothened by 2 to 3 coat of putty of approved make and smoothened surfaces by sandpapered to achieve a smooth finish and two or more coats of Plastic emulsion paint are applied as per manufacturer specification.The rate shall include for finishing the painting to obtain an even and uniform shade as directed by the Engineer-in-charge
282
-
-
... More
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. For door/ window/ clerestory window
4
-
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in-charge.
5
-
-
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (Basic price considered for interlocking pavers is Rs. 440 per sqm )
706
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
23
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes
69
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes
137
-
-
... More
Providing and fixing circular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes.
10000
-
-
... More
Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long, weighing not less than 99 gms
5
-
-
... More
Providing and laying Double Flanged Puddle flange (screwed / welded) Centrifugally (Spun) Cast Iron/DI etc complete
8
-
-
... More
Providing and fixing 100mm dia PVC soil waste and vent pipe ( including specials) conforming to IS:13592 of SWR quality of 6kg /cm2 pressure including all fittings, like EG : Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement by application of leak proof adhesive like FRP paste including cutting holes in walls and floors and making good.
4
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. The gaps between window and masonary shall be covered and filled with approved quality silicon sealent. (Glazing, paneling to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
49
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
37
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
8
-
-
... More
Supplying and applying single component, elastomeric 100% pure polyurethane coating, which is free from bitumen & tar and meets the requirement as per ASTM C 836-18, having elongation of 400% (As per ASTM D412), Tensile strength greater than 2MPa (As per ASTM D 412), Tear strength greater than 15 N/mm (As per ASTM D 624), Water Vapor Permeability greater than 25 gm/m2/day (As per ISO 9932:91), Adhesion to concrete more than 1.5 N/mm2 (As per ASTM D4541), Resistant to plant roots as per UNE CN/TS 14416, applied with a total consumption of 2.3 Kg/Sqm to achieve a minimum of 1.5 mm system DFT to satisfy the requirements of LAM as per ASTM C898, including reinforcing the coating with 45gsm glass fibre mesh at all corners and change in directions. The coating shall be continued to the entire horizontal area and should be terminated at 300mm above FFL over the vertical surface as per manufacturers specification and methodology. The system includes base preparation of cleaning, brushing and removal of flacky materials, grouting the porous area with cementitious grout, proper coving between slab and wall junctions and priming the surface with high moisture insensitive epoxy primer applied with a total consumption of 200 gms/Sqm, followed by application of polyurethane coating in two coats. Approved Makes: Dr. Fixit, BASF, SIKA Mode of Measurement : Actual area Treated as per direction of Engineer-In-Charge. (Note: The work shall be got done through a professional agency).The water proofing work shall carry a guarantee to the effect that the structure will remain water and leak proof for 5 years from the date of handing over the building after completing the water proofing treatment.)
246
-
-
... More
Supplying and applying an M20 grade concrete screed including saw cuting (approx 6mm W x 10 mm D) at 3MX4M panels and filling the groove with PU sealant, and making angle fillet of 100mmX100mm using M20 grade concrete at the corners.etc., complete as directed by Engineer in charge.
11
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal and vertical surface one coat @1.10 kg per sqmcrystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal and vertical surface one coat @1.10 kg per sqm
472
-
-
... More
Providing and Fixing of stainless steel (304grade) board of size 4'x4' fixed on 1"x1" stainless steel pipe structure on two legs of size 2"dia and 10 feet long. Writing on single side of board with two Retro Tapes(3m quality or equivalent), white and blue including cutting, fixing,etc. complete on board as per design approved by EIC.
3
-
-
... More
Providing and Fixing of stainless steel (304grade) board of size 8'x8' fixed on 2"x2" stainless steel pipe structure on two legs of size 4"dia and 15 feet long. Writing on single side of board with two Retro Tape(3m quality or equivalent) white and blue including cutting, fixing,etc. complete on board as per design approved by EIC.
1
-
-
... More
Providing and Fixing Name plate of Rowmark sheet(Silver or Golden) with Engraving done on it and fixed on Black Acrylic sheet of 3mm thickness writing as per design approved by EIC.
3
-
-
... More
Providing and supplying chair having MS chrome plated frame for the long life and durability, high density foam leatherite upholster nylon shoes to avoid floor damage with PP handles
2
-
-
... More
Providing and supplying MS steel slotted angle racks of height 96 inch, width 36 inch and depth 15 inch with seven shelves making six equal compartments. Shelve made of heavy duty M.S. sheet, Each shelve double bend in four sides M.S. angle of 14 gauge (37 to 39) x (37 to 39) x 3 mm is to be used with nut and bolts of 6 mm Hex head should be used for fixing shelves. Our sheet cutting is done mechanically to achieve clean edges and consistent cutting. All the bending is done to precision angles. The manufacturing is undertaken using Dies/Zigs and fixtures so as to achieve interchangeability, precision and a superb workmanship. Rack fully powder coated painted, complete with rubber shoes.
20
-
-
... More
Providing and supplying Office table of size 4’ x 2 ½’ x2 ½’. Frame made of 1” square 14 gauge pipe. Top of commercial board covered with sunmica, teak wood beading & melamine polish. Complete with three drawers, drawer moving on M.S. heavy duty channel and locking facility. Our sheet cutting is done mechanically to achieve clean edges and consistent cutting. All the bending is done to precision angles. The manufacturing is undertaken using Dies/Zigs and fixtures so as to achieve interchangeability, precision and a superb workmanship. M.S. Welding wherever required is done by MIG welding process to minimize distortion and for the deep penetration of the weld. All the steel components would be pre treated for de-greasing, de-rusting, after this frame fully powder coated painted and complete with rubber shoes for easy use on uneven surfaces as well.
5
-
-
... More
Providing and supplying Meshed seat and back chair, Frame made of heady duty M.S. round pipe welded with seat and back. . Our sheet/pipe cutting is done mechanically to achieve clean edges and consistent cutting. All the bending is done to precision angles. The manufacturing is undertaken using Dies/Zigs and fixtures so as to achieve nterchangeability, precision and a superb workmanship. M.S. Welding wherever required is done by MIG welding process to minimize distortion and for the deep penetration of the weld. All the steel components would be pre treated for de-greasing, de-rusting, after this frame fully powder coated painted and complete with rubber shoes for easy use on uneven surfaces as well.
6
-
-
... More
Supply of 7 mtr Tubular Pole bottom dia-150mm length-2.4 mtr, middle dia- 110mm length-2.4 mtr and top dia- 65mm length-2.2 mtr with Base plate 300X300X6 including synthetic enamel paint of two coats, National Flag 4x6 Ft. (Shiny Knitted polyster 160 GSM)
2
-
-
... More
Providing and fixing 3D alphabets on the marble stone in Golden yellow colour or any other colour approved by Engineer In Charge
12
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
... More
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. Water bound macadam
8
-
-
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
6
-
-
... More
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
23
-
-
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Cement concrete prepared with batch mixing machine
10
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 200 mm dia R.C.C. pipe
100
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia R.C.C. pipe
85
-
-
... More
Supplying of all the required materials & Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable including surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
20
-
-
... More
Supplying of all the required materials & Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required.
6
-
-
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm size
40
-
-
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm size
80
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq.mm
30
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 2.5 sq.mm
300
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 4 sq.mm
100
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 6 sq.mm
10
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm size
5
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm size
5
-
-
... More
Supplying and fixing 20 mm dia GI flexible pipe along with all ancillaries and accessories like coupler etc. as required.
2
-
-
... More
Supply and laying of 20mm steel wire reinforced corrugated flexible PVC conduit along with accessories as required
4
-
-
... More
Supply and fixing of oversized PVC cover on junction box with screws as directed by EIC
4
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
1
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
4
-
-
... More
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
2
-
-
... More
Design, fabrication, supply, installation, testing and commissioning of FIRE PUMP PANEL conforming to relevent standard and as per detailed technical specification with components as per enclosed single line diagram suitable for 440Volts, 50Hz, 3phase, 4wire AC supply. In general the panel shall be as below.
The panel shall be of modular type, floor mounting, free standing, vermin proof, indoor/outdoor duty, made out of CRCA sheet steel with powder coated painting having aluminium busbars, DMC/ SMC/ FRP insulators etc with copper cables for interconnections as shown in drawing & DTS. Incomer feeders (2 nos) shall have MCCBs of appropriate rating with interlocking, digital metering, protection systems, SPDs, LED indication lamps with back up fuse/MCBs etc as applicable and as shown in drawing.
The outgoing feeders shall have MCCBs/ MCBs/ Motor Starters/ Soft starters of appropriate rating along with LED indication lamps etc as applicable and as shown in the drawing. The item includes providing of required fixing accessories such as grouting bolt-nuts, C-channel base/ MS stand, welding, coupling of already laid cables/conduits and associated civil works complete as directed by EIC. Note:- Please refer drawing/SLD and DTS for complete Panel details. GA drawing of the panel is to be approved from the EIC before commencement of fabrication.
1
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), TPNDB Double door
1
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral MCB.
1
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
12
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
2
-
-
... More
Supplying and fixing 20A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
-
-
... More
Supplying & fixing of suitable IP-55 grade box enclosure along with one number of 16A SP switch & 6A/16A socket (switch-socket) including installation of the same by providing required acessories.
2
-
-
... More
Supplying & fixing of suitable IP-65 grade box enclosure along with one number of 16A DP MCB (10ka, C-curve) including installation of the same by providing required acessories.
2
-
-
... More
Supplying of below mentioned specification LED luminaire & fixing of the same as recess in false ceiling by providing required down rod/ chainlinks/ pipe, clamps, screws/ anchor bolt-nuts, washers etc., making electrical connections, earthing etc., as directed by engineer-in-charge. Type :- LED Street light luminaire Mounting :- Wall mounting with swan neck type GI pipe.
Body: IP-65/ IP-66 with pressure die cast housing.
Input power :- Minimum 30Watts.
Efficacy: Minimum 110 Lm/w
Ref model :- Bajaj NEXO 36L WH PO PC SD
2
-
-
... More
Supplying of below mentioned specification LED luminaire & fixing of the same as recess in false ceiling by providing required down rod/ chainlinks/ pipe, clamps, screws/ anchor bolt-nuts, washers etc., making electrical connections, earthing etc., as directed by engineer-in-charge. Type :- LED Industrial batten luminaire Mounting :- Wall/ ceiling mounting type.
Body: PC housing & diffuser weatherproof, IP-65
Input power :- Minimum 20Watts.
Efficacy: Minimum 110 Lm/w
Ref model :- Bajaj- BIPC 20W LED (2ft WH)
12
-
-
... More
Supplying of below mentioned specification LED luminaire & fixing of the same as recess in false ceiling by providing required down rod/ chainlinks/ pipe, clamps, screws/ anchor bolt-nuts, washers etc., making electrical connections, earthing etc., as directed by engineer-in-charge. Type :- LED Industrial batten luminaire Mounting :- Wall/ ceiling mounting type.
Body: PC housing & diffuser weatherproof, IP-65
Input power :- Minimum 40Watts.
Efficacy: Minimum 110 Lm/w
Ref model :- Bajaj BIPC 40W LED XE (4ft WH)
6
-
-
... More
Supplying of below mentioned specification LED luminaire & fixing of the same in the ceiling/Wall surface by providing required, clamps screws/ anchor bolt-nuts, washers, TW guttas etc., making electrical connections, earthing etc., as directed by engineer-in-charge
Type: IP-65 Bulk head luminaire
Mounting type :- Surface mounting
Body :- Pressure die cast housing
Rated power :- 9watts or 10 Watts
Ref model :-Bajaj BIBWP 10W LED
6
-
-
... More
Supplying, installation, testing and commissioning of 375 mm sweep, single phase, heavy duty metal body exhaust fan with mesh cover/ automated shutters, accessories, suitable size bolt & nuts/ screws, including making wall opening and plastering, electrical connections, earthing etc., complete as directed by EIC. The electrical connections shall be made by providing suitable size PVC insulated flexible copper cable from already provided ceiling rose .
2
-
-
... More
Supplying & Laying of following size LT power cable with Aluminium conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (A2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments, including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3.5C X 70 Sq mm size.
300
-
-
... More
Supplying & Laying of following size LT power cable with Aluminium conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (A2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments, including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3.5C X 50 Sq mm size.
65
-
-
... More
Supplying & Laying of following size LT power cable with Copper conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3C X 16 Sq mm size
60
-
-
... More
Supplying & Laying of following size LT power cable with Copper conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3C X 6 Sq mm size.
75
-
-
... More
Supplying & Laying of following size LT power cable with Aluminium conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (A2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 4C X 6 Sq mm size.
150
-
-
... More
Supplying and making end termination of 3C x 16 sqmm Copper Cable with Copper Lugs and double compression brass gland at one end of cable as directed by EIC.
4
-
-
... More
Supplying and making end termination of 3C x 6 sqmm Copper Cable with tinned Copper Lugs and double compression brass gland at one end of cable as directed by EIC.
6
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade at one end as required. 3½ X 70 sq. mm (38mm)
6
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade at one end as required. 3½ X 50 sq. mm (35mm)
2
-
-
... More
Excavation for cable trenches in normal soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering, levelling and disposal of surplus excavated soil as directed, within a lead of 50 metres etc.
65
-
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) inside already made trench as required. 150 mm dia
2
-
-
... More
Supplying and making cable route marker with reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 75 cm X 45 cm X 20cm (thickness) including inscription duly engraved & handle as required.
10
-
-
... More
Supplying and laying of approved quality and make well burnt bricks breadthwise on top along the already laid cable/sand inside the trench as directed by the Engineer -in charge. (Approx. 09 nos of bricks will be required per Mtr)
250
-
-
... More
Supplying and spreading of clean & dry river sand /M-2 sand all around the already laid cable in the trench as directed by EIC.
20
-
-
... More
Cutting/Breaking of concrete road/flooring to a required width and depth suitable by machine/manually for laying of pipe/cable. The work includes refilling of excavated earth after the pipes/cables have been laid, laying of available stone , borders, watering, ramming and providing of 150mm thickness1:2:4 cement concrete( PCC).The surface shall be rough plastered suitable for movement of vehicles and required curing to be done. Removed debries shall be cleared from the site immediately as directed. (Note: Excavation and refilling below PCC slab & stone borders shall be measured and paid separately)
1
-
-
... More
Supplying of all the required materials & making of Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required including associated civil works . (Note: Earth excavation for pit will be measured & paid separete item.)
4
-
-
... More
Supplying and fixing of 25 mm X 5 mm G.I strip on surface or in recess as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
50
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness
10
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness
1
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness
1
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness
30
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness
1
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness
1
-
-
... More
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump of capacity not less than 2280 lpm at 70 m Head suitable for automatic operation and consisting of following, complete in all respects, as required :
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
Note: 1) The head of the pump is selected in a manner so as to give a minimum 5.25 kgf/cm2 pressure at the highest/farthest point. 2) The Pump flow rate and head indicated above is for reference only, the contractor shall design and indicate the actual size, if higher size units are required.
1
-
-
... More
Supplying, installation, testing and commissioning of Diesel engine driven main fire pump of capacity not less than 2280 lpm at 70 m Head suitable for automatic operation and consisting of following, complete in all respects, as required :
(a) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
(b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, MS (Class C) exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (c) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.
Note: The head of the pump is selected in a manner so as to give a minimum 5.25 kgf/cm2 pressure at the highest/farthest point.
Note:
1) Diesel engine Pump shall have double walled Diesel tank of capacity 8 hours (minimum) engine run time+ 5% for expansion+5% for volume of fire tank along with supply and return piping from engine, air vent, over flow, drain, filling, magnetic level switch etc. as per specification.
2) The pump shall be provided with safety control panel, 2 Nos. of batteries of adequate rating with battery leads & stand, battery charger etc as per specification.
3) The head of the pump is selected in a manner so as to give a minimum 5.25 kgf/cm2 pressure at the highest/farthest point. 4) The Pump flow rate and head indicated above is for reference only, the contractor shall design and indicate the actual size, if higher size units are required.
1
-
-
... More
Supplying, installation, testing and commissioning of Electric driven pressurisation pump of capacity not less than 180 lpm at 70 m Head suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
(a) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
(b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.
(c) M.S.fabricated Common base plate, coupling, coupling
guard, foundation bolts etc. as required.
Note: 1) The Pump flow rate and head indicated above is for reference only, the contractor shall design and indicate the actual size, if higher size units are required.
1
-
-
... More
Supplying, installation, testing and commissioning of 200 mm dia double flanged sluice valve of rating PN 1.6 with rising spindle type, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 for Fire Sump suction line and discharge header line.
3
-
-
... More
Supplying, installation, testing and commissioning of 150 mm dia double flanged sluice valve of rating PN 1.6 with rising spindle type, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 for Electric and Diesel Fire Main Pumps suction line and discharge line.
6
-
-
... More
Supplying, installation, testing and commissioning of 80 mm dia double flanged sluice valve of rating PN 1.6 with rising spindle type, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 for Jockey pump suction line.
1
-
-
... More
Supplying, installation, testing and commissioning of 65 mm dia double flanged sluice valve of rating PN 1.6 with rising spindle type, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 for Jockey pump discharge line.
1
-
-
... More
Supplying, installation, testing and commissioning of 200 mm dia butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095.
2
-
-
... More
Supplying, installation, testing and commissioning of 150 mm dia butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095.
1
-
-
... More
Supplying, installation, testing and commissioning of 100 mm dia butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095.
1
-
-
... More
Supplying, installation, testing and commissioning of 80 mm dia butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 .
1
-
-
... More
Supplying, installation, testing and commissioning of 150 mm dia stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange for Electric and Diesel Fire Pumps suction line and discharge line.
2
-
-
... More
Supplying, installation, testing and commissioning of 80 mm dia stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange for Jockey pump suction line.
1
-
-
... More
Supplying, installation, testing and commissioning of 150 mm dia non-return valve confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required for Electric and Diesel Fire Pumps discharge line.
2
-
-
... More
Supplying, installation, testing and commissioning of 65 mm dia non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required for Jockey pump discharge line.
1
-
-
... More
Supplying, installation, testing and commissioning of 150 mm dia. SS 304 expansion bellows (of at least PN1.6 rating) with control unit and matching carbon steel flanges, gaskets, nuts, bolts and washers for Electric and Diesel Fire Pumps suction line.
4
-
-
... More
Supplying, installation, testing and commissioning of 80 mm dia. SS 304 expansion bellows (of at least PN 1.6 rating) with control unit and matching carbon steel flanges, gaskets, nuts, bolts and washers for Jockey pump suction line.
1
-
-
... More
Supplying, installation, testing and commissioning of 65 mm dia. SS 304 expansion bellows (of at least PN 1.6 rating) with control unit and matching carbon steel flanges, gaskets, nuts, bolts and washers for Jockey pump discharge line.
1
-
-
... More
Supplying, installation, testing and commissioning of air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
1
-
-
... More
Supplying, installation, testing and commissioning of pressure switch range upto 16Bar and adjustable differential range upto 3 Bar in M.S. pipe line including connection etc. all as specified and/or directed etc., complete.for fire fighting system.
3
-
-
... More
Supplying, installation, testing and commissioning of Gun Metal Ball valve (drain valve) of 25 mm dia. with fittings as specified and/or directed etc complete.,
3
-
-
... More
Supplying, installation, testing and commissioning of automatic air vent with 25 mm ball valve with fittings all as specified and/or directed etc., complete
3
-
-
... More
Supplying, installation, testing and commissioning of dia dial type pressure guage of PN 1.6 complete with necessary SS fittings, brass/ SS isolating valves all as specified and/or directed etc complete
8
-
-
... More
Supplying, installation, testing and commissioning of GSM Auto dialer with Display enclosed in a metal box and suitable power supply adapter
3
-
-
... More
Supplying, installation, testing and commissioning of Float and chord level Indicator
2
-
-
... More
Supplying, installation, testing and commissioning of vane type flow switch with retard adjustment suitable for 200 mm dia pipe UL Listed/ FM appoved
1
-
-
... More
Supply, Installation, testing and commissioning of Flow meter (Electro Magnetic type) of rating PN16, outdoor type, on discharge pipeline to measure domestic water (TDS in range of upto 2500 ppm) flow 0 to 150 m3/hr and suitable to 150 mm dia pipe with necessary fittings, flanges all as specified and/or directed etc., complete.
1
-
-
... More
Providing, laying, testing & commissioning of 200 mm dia under ground heavy duty GI pipe (Thickness 6.35mm) conforming to IS 3589/IS 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and in-ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/ asphalt tape as per IS 10221, refilling the trench etc.as required.
Note: 1) The pipe shall be suitable for underground application, necessary protection shall be provided. 2) The exavation, refilling and support structure for laying the pipe underground shall be measured and paid under relavent item of SOQR.
220
-
-
... More
Providing, laying, testing & commissioning of 200 mm dia (wall thickness 6.35 mm) above ground 'C' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.
200
-
-
... More
Providing, laying, testing & commissioning of 150 mm dia above ground 'C' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.
50
-
-
... More
Providing, laying, testing & commissioning of 100 mm dia above ground 'C' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.
20
-
-
... More
Providing, laying, testing & commissioning of 80 mm dia above ground 'C' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.
90
-
-
... More
Providing, laying, testing & commissioning of 80 mm dia above ground 'C' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets with min. 4 mm thick Anti corrosive pipe protection bituminous tape etc. with suitable support required for underground pipe.
20
-
-
... More
Providing, laying, testing & commissioning of 65 mm dia (wall thickness 6.3 mm) above ground 'C' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.
10
-
-
... More
Providing, laying, testing & commissioning of 50 mm dia above ground 'C' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.
10
-
-
... More
Providing, laying, testing & commissioning of 40 mm dia above ground 'C' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.
10
-
-
... More
Providing, laying, testing & commissioning of 25 mm dia above ground 'C' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.
20
-
-
... More
Supplying and fixing Single headed gunmetal external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal.
6
-
-
... More
Supplying and fixing single headed gunmetal internal hydrant valve with instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required.
5
-
-
... More
Supplying and fixing Gun Metal 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required
22
-
-
... More
Supplying and fixing of 40 m long first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following asrequired.
(i) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585.
(ii) 20 mm nominal internal dia gun metal globe valve &nozzle.
(iii) Drum and brackets for fixing the equipmets on wall.
(iv) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
5
-
-
... More
Supplying & fixing 63 mm dia gunmetal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required.
11
-
-
... More
Supply, installation, testing and commissioning of fire brigade connection of 4 way fire briage breeching inlet having cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for 150 mm pipe connection conforming to IS 904 as required, complete in all respect as per technical specification.
1
-
-
... More
Supplying, installing, testing and commissioning of Hose cabinet for yard hydrant comprising of the Weather proof outdoor type lockable hose cabinet of Size 600(H) x 750(L) x 250(D) mm made of 14 SWG CRCA MS Sheet with 2 doors and 4 mm thick glazed glass with water proof rubber beading, rain protection hood. it shall be in red out side and white inside with two coats of enamel paint over a coat of primer . "HOSE CABINET NO.." shall be painted on the inner face of the glass in 50 mm size block letter. Cost shall include the cost of break glass box containing the key of the cabinet. NOTE: Structural steel support with appropriate anti-corrosive paint and concrete foundation will be paid under relevant item of SOQR.
6
-
-
... More
Supplying, erecting, testing and commissioning of Hose cabinet for Landing Hydrants comprising of the Indoor Type wall mounted lockable hose cabinet of size 900(W) mm x 1350 (H)mm x 450(D) mm made of 14 SWG CRCA MS Sheet with 2 doors and 4 mm thick glazed glass with water proof rubber beading. it shall be in red out side and white inside with two coats of enamel paint over a coat of primer . "HOSE CABINET NO.." shall be painted on the inner face of the glass in 50 mm size block letter. Cost shall include the cost of break glass box containing the key of the cabinet. Size of Cabinet shall be suitable to house 2 nos of 15M RRL Hose and 1 nos of Branch nozzle, 1 nos of first aid hose reel and 1 no of internal hydrant valve.
5
-
-
... More
Supply, installation, testing and commissioning of wall mounted Propeller exhaust air fan of capacity 3500 CFM & static pressure of 15 mm suitable for outdoor application. Fan shall be statically and dynamically balanced. The exhaust air fan shall be supplied with outlet GI cowl piece and protective wire mesh, MS brackets / supports, all as specified and / or directed etc., complete.
2
-
-
... More
Obtaining NOC & Fire License/ Approval of the Proposed Fire Hydrant system from Department of State Govt. as per the direction of Engineer in charge. The quoted price also includes complete services from the contractor for liasoning works such as filling necessary applications, submission of forms for approval to the Fire approval authorities depositing the fees and other amounts as required getting the premises installations, inspected and approval and all other formalities required till the approval is obtained All the expenses and department charges incurred shall be borne by the contractor. Only remittance to Government fees on Demand will be borne and reimbursed by BEL against proof of Challan/Receipt of fee and proof of bank transaction.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%