Amber Development And Management Authority Tender

S & F following sizes (dia.) of ISI marked MMS (IS:9537P-III) vergin material PVC conduit as per PWD specification for electrical Works along with its accessories (IS:3419) as required in recess including cutting the wall, covering condu it and making good the same as required. All relative and latest acceptance tests reports by any NABL accredited lab for the conduit shall be submitted before execution & All as per pre approved by Engineer incharge. For additional technical parameters of products/work, refer Annexure "A" attached with this BSR . 25 mm

S&F following sizes of ISI marked ( IS:14927 P - II ) UPVC casing capping as per PWD specification for electrical works along with all accessories like coupler, inner, outer, elbow, square box, tee end cap etc. on surface with screws, expansion fasteners all as per pre approved by engineer in charge, making connections, testing etc. complete as required. For additional technical parameters of products/work, refer Annexure "A" attached with this BSR. 20 mm x 12 mm

Supply, Installation, Testing and Commissioning of Wall mounted ISO 9001:2015 & 14001 or higher level certified company made Communication enclosure (Rack) of Minimum 500 MM Depth with made from CRCA & hot dip powder coated, front sturdy sheet steel frame folded from one piece and welded with minimum 5mmtoughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19" angles with wall mounting provision on wall. Accessories like: 1 No of 19" 1U Horizontal Cable manager, 2 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19" 1U, mountable socket strips with 6 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with fastner of suitable capcity etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .