All India Council For Technical Education Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 2,42,420Document Cost
₹ 1,000Tender Fee
₹ 1,000
Summary
Nit06(civil)2019-20 Smsa Banswara For Svgms Cheench (bagidora)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_SSAR_170969_1Bid Award Id
ViewTender No
NIT06(CIVIL)2019-20SMSA BANSWARA for SVGMS CHEENCHTender Authority
All India Council For Technical Education ViewPurchaser Address
-Website
http://https://www.aicte-india.org/reports/overview/Sarva-Shiksha-Abhiyan
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
TECHNICAL DOCUMENT AS PER NIT REQUIREMTN WITH SOREAL AND SIGN BY CONTRACTOR
BOQ Items
... More
Supply & Stacking good earth at site complete including loading unloading & transportaton etc. A Good
547.49
-
135
... More
Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
73.15
-
3502
... More
Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8 (1 cement:4 Coarse sand :8 gradeed stone aggregate 40 mm nominal size).
120.35
-
2964
... More
Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).'
4.49
-
4045
... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. FOR DPC WORK
M20 grade Nominal Mix / Design Mix
163.17
-
4877
... More
Lintel Beam : Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix
32.57
-
5081
... More
Slab & Beams: Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix
160.35
-
5081
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for foundation, footings, strap beam, raft, base of column etc
521.47
-
104
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
1288.42
-
206
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for columns, pillers, posts,and struts etc
586.38
-
195
... More
P/F reinforcement for RCC work including straightening,cutting, bending, placing in position and binding (including cost of binding wire) all complete upto floor five leveTMT bars (Conforming of relevent IS Code).
40916
-
71
... More
Brick masonary with Ist Class Designation 75 in superstructure above plinth level upto floor Vth level in all shapes and sizes in Cement mortar 1:6 ( 1 Cement :6 Coarse sand) (Add extra over respective items all type of bricks for using clay fly ash bricks
93.57
-
3366.1
... More
Half Brick masonry in foundation & plinth using bricks of designation 75 Cement mortar 1 : 4 (1 cement :4 coarse sand) Add extra over item no 5.8 for half brick masonry in superstructure up to third storey including cost of nominal hoopreiformcent (2 Nos. 6 mm dia M.S. bar at every forth course)
615.17
-
428
... More
Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in cement mortat 1:6 (1-Cement: 6- Sand)
211.08
-
1925
... More
Add extra for Random Rubble stone masonry with hard stone in Wall upto 30cm. and less thickness.
52.31
-
126
... More
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS : 15622 of size 200mm x 300mm in walls, floors steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar.)Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.
Category KAjaria/Jhonson/Somani make etc.
193.73
-
1125
... More
Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
Category B : Bell/Orient/Thar make etc.
59.49
-
915
... More
Extra for using size above 400x400 size MAT finish tiles in place of 300mm x 300mm size.
193.73
-
-
... More
Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.South Zed Black Above 3601 Cm2 Slabs
8.31
-
5162
... More
Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick . Commercial Veneer both side
34.34
-
1798
... More
Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : For external teak wood lipping on flush door 40 mm x 6 mm
34.34
-
77
... More
Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured).
23.31
-
118.5
... More
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.
5
-
847
... More
Providing and fixing Aluminium curtain rails with rooler stop ends rail and bracket n pelements .
16.4
-
324
... More
Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile B
102.14
-
407
... More
Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry : Size 100 x 75mm.
46.96
-
145
... More
Providing and fixing M.S. sheet 1 mm thick single leaf door shutter in angle iron frame 35X35X5mm suitabilly diagonally braced with 25X3mm flat iron above and below lock rail of size 50X5mm beading extra including all fittings as peer direction of engg. incharge but excluding cost of chowkhats including two coats of anit- corrosive red oxide primer paint. MS sheet 22 SWG add extra for double leaf shtters.
2.52
-
1824
... More
Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).
with 75 mm opening when closed
5.75
-
3302
... More
Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge
-
-
-
... More
PartlyFixed & Partly Openable
60.34
-
2426
... More
Window fixed.
50.37
-
1595
... More
Providing brass handles/peg stays and fittings in place of oxidized fitting
60.34
-
80
... More
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.
60.34
-
583
... More
Providing and fixing Square bars or other flat welded to window, ventilatiors etc.
1013.1
-
80
... More
Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
49.88
-
4112
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
215.43
-
39
... More
Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete.
16
-
135
... More
Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge.
665.14
-
650
... More
Polished Blue Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm 25 mm thick slab
857.92
-
693
... More
Polished Blue Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. For area of each slab upto 901 sqm to 2001 Sqcm 25 mm thick slab
76.44
-
687
... More
Add extra over item no. 11.15 to 11.18 for terrazo flooring on stair case treads not exceeding 30cm in width including cost of forming of nosing etc.
16.83
-
23
... More
Random rubble dry stone kharanja under floor .
187.86
-
540
... More
Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8 (1 cement:4 Coarse sand :8 gradeed stone aggregate 40 mm nominal size). Light shade using shade cement.
39.6
-
2964
... More
Providing and laying of interlocking concret block pavement having thickness 80mm as per drawings and Technical specification Clause 1504.
558
-
514
... More
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick.
1062.97
-
102
... More
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 12mm thick.
1529.98
-
79
... More
6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)
707.57
-
113
... More
Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design
168.44
-
6.3
... More
Applying Birla/JK white cement based putty over cement plastered surface for making even surfce New Plastered Surface (three or more coats)
3142.27
-
176
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
2237.55
-
60.5
... More
Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safety provision PERKY FINE TEXTURD -Roller Finish av. thickness 400 to 500 microns.
904.72
-
187
... More
Applying priming coat : With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood.
68.68
-
27
... More
Painting with ready mix paint of approved brand and manufacture in all shades to given an even shade Two or more coats on new work
747.93
-
38
... More
Lettering with black Japan paint of approved brand and manufacture.
1500
-
1.85
... More
Providing and fixing anodized aluminum work (Anodizing to be got done from approved Anodizer) for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion
23.34
-
456
... More
For shutters of openable door, windows & ventilators including providing & fixing hinges/rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Add 10% extra over item no 16.1 for work done in curved/cirular shape.
32
-
594
... More
Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides.
1.4
-
1244
... More
Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With glass panes of 5.0 mm thickness ( weight not less than 13.75 kg/sqm) as per IS 2835
2.31
-
955
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. Confirming IS 6315 such as sandhu/Amar or equivalent make
2
-
1857
... More
Providing and fixing brass locks without handle for Aluminum door, of approved quality, make a desing as directed by Engineer In charge
1
-
433
... More
Providing and fixing to existing door frames.: 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15 mm x15mm , top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing.(For W.C.and bathroom door shutter).
12.6
-
3480
... More
Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
30.96
-
4000
... More
Providing and fixing Pre cast Reinforcement Cement concrete Chattari at terrace of the building 1st floor , The chhatri shall be made precast Reinforcement cement concrete by using the reinforcement and applying carving, graving and Nakashi work of superior quality as shown in the drawing. The chattri shall be have four side part of size 1000x1100 mm above the square portion of chhatri the round gumbad shall be of 1000 mm diameter and the height of gumbad shall be of 730 mm and above round gumbad a spike of cement precast concrete 320 mm . The total height of chhatri from bottom to top of spike shall be of 25370 mm. The chhatri shall be projected at junction of gumbad al around 210 mm. The work shall be carried out as per given drawing. The rates are inclussive of all items involved in the item of work and placining in position etc all complete as per drawing and direction of Engineer in charge .
6
-
28696
... More
Providing and Fixing Pre Cast Reinforcement Cement Concrete ARCH (Mehrab) of average thickness 50 mm and the height shall be of 975 mm as per the drawing. The work shall apply of Craving and Nakashi work of superior quality as shown in the drawing . The rates are inclussive of cement concreting, centering , shuttering, reinforcement ,plastering the surface with cement plaster 1:3 (1 Cement : 3 Fine Sand) and including fixing in position etc all complete as per drawing and direction of Engineer in Charge .
44.9
-
3556
... More
PART-B (Sanitary Work) Based on BSR PWD - 2015, Circle Banswara
-
-
-
... More
P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.
8
-
1781
... More
P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor
1
-
1486
... More
P&F water closet seat covers with brass hinges complete: solid PVC (IS 2548 marked) grade-I white for EWC.
1
-
834
... More
P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:
-
-
-
... More
PVC with PVC bend as per IS : 7231 .
9
-
1446
... More
P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.
-
-
-
... More
Mini stall size 455x385x350mm.
7
-
1530
... More
P & F W.V.C. Urinal Partition Plate of approved standard make of size 630x315mm including making good the wall.
6
-
870
... More
P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.For 3 Urinals
2
-
1305
... More
P & F C.P. brass Urinal Spreader for stall urinal of approved make.
7
-
375
... More
P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,
25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 550 mm x 400 mm
8
-
2140
... More
P& F waste Pipe with all fitting
-
-
-
... More
P.V.C. with C.P. nut 32 mm dia
8
-
163
... More
P & F Grating of approved quality/make:
-
-
-
... More
Stainless Steel Sheet size 125mm dia.
20
-
74.5
... More
P & F Liquid Soap Container with brackets complete of approved make:
-
-
-
... More
C.P. brass
4
-
231
... More
P & F Soap Dish or Tray of approved quality/make
-
-
-
... More
C.P. brass
4
-
84.5
... More
P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.
1
-
347
... More
Providing & fixing C.P.flange for 15mm dia taps.
20
-
28
... More
P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:
-
-
-
... More
C.P. Pillar cock, 15 mm dia nominal bore
8
-
685
... More
P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:
-
-
-
... More
C.P. Brass bib cock,15mm nominal bore.
20
-
688
... More
P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:
-
-
-
... More
C.P. Brass 15mm nominal bore.
10
-
744
... More
P & F 15 mm. Dia Connection Pipe of approved quality/make :
-
-
-
... More
(-do-) 600mm.
10
-
170
... More
P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :
-
-
-
... More
(-do-) 25mm nominal bore.
5
-
682
... More
P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 (-do-)
2
-
8904
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)
-
-
-
... More
20mm nominal outer dia pipes
80
-
268
... More
25 mm nominal outer dia pipes
60
-
325
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.
(External work).
-
-
-
... More
25 mm nominal outer dia pipes
50
-
286
... More
P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.
-
-
-
... More
Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm.
2
-
926
... More
P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 160 mm dia
20
-
279
... More
P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 45, 160 mm dia
5
-
126
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. 110 mm dia
85
-
368
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make, Coupler110mm dia
15
-
110
... More
Bend 45 Dg. 110mm dia
3
-
137
... More
Door Bend 87.5 Dg. 110mm dia
3
-
202
... More
Single 'Y' 110mm dia
10
-
278
... More
Socket Plug 110mm dia
3
-
79
... More
Pipe Clip 110mm dia
30
-
31
... More
W.C. Connector 110mm dia
8
-
234
... More
W.C. Connector (Bend) with ring 110mm dia
8
-
236
... More
Nahni Trap without Jali 4” 110mm dia
20
-
152
... More
Vent Cowel 110mm dia
3
-
51.5
... More
Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.
-
-
-
... More
Depth up to 0.5 M
2
-
14703
... More
Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect.
2
-
31408
... More
Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size Size 300 Cm. dia outside & 300 Cm. depth
2
-
5345
... More
Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)( Excluding cost of pipe)
-
-
-
... More
100mm dia S.W. pipe
70
-
528
... More
PART-B (Electric Work) Based on BSR PWD 2013, Jaipur Circle
-
-
-
... More
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required.
-
-
-
... More
Short point (up to 3 mtr.)
18
-
260
... More
Medium point (up to 6 mtr)
39
-
377
... More
Long point (up to 10 mtr)
50
-
508
... More
Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.
-
-
-
... More
On board
20
-
244
... More
Medium point (up to 6 mtr.)
2
-
445
... More
Long point (up to 10 mtr..)
10
-
571
... More
Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.
20
-
538
... More
S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required.
-
-
-
... More
25 mm (for Light Circuit, Power circuit & Tel. Cable )
500
-
42
... More
32 mm (for Main Cable)
50
-
65
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (Group-1)
-
-
-
... More
1 x 1.5 sq.mm
240
-
14
... More
2 x 2.5 sq. mm. + 1x1.5sqmm (Light Circuit)
400
-
53
... More
2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (Power Circuit)
150
-
77
... More
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. (Armoured Cable) 16.0 Sq.mm
-
-
-
... More
4 core
80
-
178
... More
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
-
-
-
... More
4 x 16.0 sq.mm
2
-
108
... More
LAN, TELEPHONE WIRING AND ACCESSORIES
-
-
-
... More
Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required
4
-
380
... More
Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required. (Group-1)
75
-
36
... More
SITC of 10/100 MBPS Unmanaged Switch
-
-
-
... More
8 Port
1
-
1500
... More
RJ-11 telephone jack single two line
4
-
86
... More
P & F following size mounting grid plates with cover plates
-
-
-
... More
1/2 Module
4
-
69
... More
P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required.
-
-
-
... More
1-2 Module
4
-
40
... More
Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed conduit/casing capping. Unarmoured Telephone cable in existing surface or recessed conduit/casing capping. 2 pair
75
-
13
... More
Jelly filled armoured (PIJF) Armoured telephone cable including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 10 pair
45
-
190
... More
P & F Krone module with base frame in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder painted.,including dressing, ferruling and punching of telephone cable with krone tool etc. as required. 10 Pairs
1
-
681
... More
DB & MCB
-
-
-
... More
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Double door (Three phase) 12 Way
2
-
3520
... More
P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.
-
-
-
... More
Single pole MCB 6 A to 32 A rating
30
-
151
... More
Four pole MCB 40 A to 63 A rating
2
-
1378
... More
P&F 240/415 V Residual current circuit breaker conforming to IS:12640:1988/ IEC 61008 on existing board/sheet including making connections, testing etc. as required
-
-
-
... More
Two pole 100/300mA sensitivity 40 A rating
2
-
1781
... More
FAN & LIGHT FIXTURES
-
-
-
... More
P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.
-
-
-
... More
1200 mm sweep
34
-
1451
... More
1400 mm sweep
1
-
1536
... More
P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .
35
-
95
... More
P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required. 5 step fan regulator 2 Module
35
-
460
... More
P & F of ventilating fans, Capacitor start, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required. 250 mm sweep
2
-
1546
... More
P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.
80
-
18
... More
P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint) / (extruded non corrosive UV resist EP channel) complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube). Group 1
-
-
-
... More
1 X 36 Watts with EB
44
-
377
... More
Flourscent powder coated (minimum 3 star rating)
-
-
-
... More
36/40 Watts
44
-
63
... More
P & F IP-65 protected Wall mounted Bulk Head light fixture suitable for 15/18 watt CFL lamp with integral control gear, housing made from cast aluminium with UV stablized diffuser comprising of copper ballast, copper conductor including making connection testing etc. as required (without lamp)
8
-
520
... More
P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.
-
-
-
... More
13/18 watt
9
-
177
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements