Ajmer Smart City Limited Tender

Officer Working Table. Providing & placing Executive officer working table made out of 18mm thick ISI marked Water Proof, Termite Proof, Borer free Plywood with 1.00mm thick decorative laminate of approved shade on external, internal and under surfaces all-around of table duly pasted with ISI marked adhesive of approved make all work as per directions and satisfaction of Engineer In charge. Brief Specifications of table are as under: a) Table size 1500(W) x 900 (D) x 750 (H) all dimensions in mm. b) All framework and supporting arrangements for table and top shall be made of seasoned 2nd Class teak wood duly primed with approved primer and finished with melamine polish in matt / gloss finish. c) The table top, side panels & front modesty shall be made up of 18mm thick ISI marked Plywood with 1.00mm thick decorative laminate on all surfaces of table. d) CPU & Keyboard Arrangements. Integrated wooden shelf for CPU & foldable arrangements for placing keyboard separately made out of 18mm thick ISI marked plywood & 1.00 mm thick decorative laminate all around shall be provided. e) Under Table Storage: One Under table Drawer type storage cabinet having 03 Nos. drawers. The internal dimensions of top two & last drawers shall be 350(W) x 480(D) x 150(H) & 350(W) x 480(D) x 350(H)in mm respectively. The outer of above storage & drawers shall be made of 18mm thick plywood with 1.00mm thick laminate on all surfaces. All Drawers shall run on telescopic channel set. The telescopic channels & hinges shall be of make Hettich/ Hafele/Dorset/ Ozone or equivalent. The drawers shall have proper metallic brass/ Copper/ Stainless Steel/ Brushed finish handles of adequate size and proper separate locking arrangements. f) Electrical & Other Accessories arrangements. The table shall have proper concealed provisions for accommodating Power, telephone, LAN, audio & video cables, electrical points with switches, sockets, ports for electric, telephone, Intercoms, LAN, Computer Systems, monitors, PBAX, Printers etc. of approved make and requirements. Suitable Space shall be provided for visitor chairs. All edges shall be sealed with 2nd class teak wood rounded moulding. The edge moulding shall be treated and finished with Melamine Polish. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all respect as per technical specifications, directions and satisfaction of Engineer In charge.

Officer Working Table. Providing & placing Executive officer working table made out of 18mm thick ISI marked Water Proof, Termite Proof, Borer free Plywood with 1.00mm thick decorative laminate of approved shade on external, internal and under surfaces all round of table duly pasted with ISI marked adhesive of approved make all work as per directions and satisfaction of Engineer In charge. Brief Specifications of table are as under: a) Table size 1200(W) x 750 (D) x 750 (H) all dimensions in mm. b) All framework and supporting arrangements for table and top shall be made of seasoned 2nd Class teak wood duly primed with approved primer and finished with melamine polish in matt / gloss finish. c) The table top, side panels & front modesty shall be made up of 18mm thick ISI marked Plywood with 1.00mm thick decorative laminate on all surfaces of table. d) CPU & Keyboard Arrangements. Integrated wooden shelf for CPU & foldable arrangements for placing keyboard separately made out of 18mm thick ISI marked plywood & 1.00 mm thick decorative laminate all around shall be provided. e) Under Table Storage: One Under table Drawer type storage cabinet having 03 Nos. drawers. The internal dimensions of top two & last drawers shall be 350(W) x 480(D) x 150(H) & 350(W) x 480(D) x 350(H)in mm respectively. The outer of above storage & drawers shall be made of 18mm thick plywood with 1.00mm thick laminate on all surfaces. All Drawers shall run on telescopic channel set. The telescopic channels & hinges shall be of make Hettich/ Hafele/Dorset/ Ozone or equivalent. The drawers shall have proper metallic brass/ Copper/ Stainless Steel/ Brushed finish handles of adequate size and proper separate locking arrangements. f) Electrical & Other Accessories arrangements. The table shall have proper concealed provisions for accommodating Power, telephone, LAN, audio & video cables, electrical points with switches, sockets, ports for electric, telephone, Intercoms, LAN, Computer Systems, monitors, PBAX, Printers etc. of approved make and requirements. Suitable Space shall be provided for visitor chairs. All edges shall be sealed with 2nd class teak wood rounded moulding. The edge moulding shall be treated and finished with Melamine Polish. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, directions and satisfaction of Engineer in charge.

Providing, Supplying & Installation of Center table glass CENTRE TABLE - Size- (L)1100mmx(D)600mmx(H)440mm Supplying and placing in position of center table made up of metal / Wooden frame as per photograph. Center Table shall have 12mm thick toughened glass with beveled edges and in rectangular shape. Another 12mm thick toughened glass attached with Stainless steel / chrome plated metal rods with UV welding and to be used as a bookshelf at bottom. Suitable Space shall be provided for visitor chairs. All glasses shall have beveled rounded edges. All work complete including Fabrication, screwing, welding, transporting, loading, unloading, placing, finishing etc complete in all due respect as per technical specifications, directions and satisfaction of Engineer in charge.

Providing, Supplying & Installation of High Back Cushioned Leatherette Upholstered Ergonomic Chair 1. High Back Cushioned Leatherette Upholstered revolving Ergonomic chair. 2. Dimensions of Chairs: a) Seat: Width 500 mm +/- 10mm, Depth 480mm +/- 10mm b) Back Rest: Width 500mm +/- 10mm, Height from Seat 700mm +/- 10mm c) Minimum Seat Height 470mm +/- 10mm & Maximum Seat height 570mm +/- 10mm 3. Seat shall be made up of 12 mm thick hot pressed anti- termite water resistant plywood, upholstered with leatherette and moulded polyurethane foam. 4. Chair back shall be made of 12 mm thick hot pressed anti- termite water resistant plywood, upholstered with leatherette and moulded polyurethane foam. The polyurethane foam density shall be 45 +/- 2kg/m3. Chair Back shall be fixed with lumber support & fixed with Head rest for extra support. Lumber support (260mm W * 150mm H) Attached leatherette headrest shall be supported with 2 chrome plated rods of 20mm thickness from headrest to seat base. 5. PU / Leatherette padded Adjustable handles (260 mm W * 85mm D) shall operate through push button. Chair shall have regular tilt mechanism feature: 360-degree revolving type with single position locking Chrome base fixed with 5 nos. Nylon castors. 6.Chair Backrest Moulds shall provide adequate back support, and makes the long hours of seating comfortable. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer In charge.

Providing, Supplying & Installation of High back breathable mesh fabric upholstered Ergonomic revolving chair 1. High back breathable mesh fabric upholstered Ergonomic revolving chair. 2. Dimensions of Chairs: a) Seat: Width 500 mm +/- 10mm, Depth 480mm +/- 10mm b) Back Rest: Width 500mm +/- 10mm, Height from Seat 700mm +/- 10mm c) Minimum Seat Height 470mm +/- 10mm & Maximum Seat height 570mm +/- 10mm 3. Seat shall be made up of 12 mm thick hot pressed anti- termite water resistant plywood, upholstered with breathable mesh type fabric and moulded polyurethane foam. 4. Chair back shall be made of 40 mm thick edge of PVC moulding with breathable Mesh fabric upholstery. The polyurethane foam density shall be 45 +/- 2kg/m3. Chair Back shall be fixed with lumber support & fixed with Head rest for extra support. Lumber support ( 260mm W * 150mm H ) attached headrest shall be supported with 2 chrome plated rods of 20mm thickness from headrest to seat base. 5. PU padded Adjustable handles (260 mm W * 85mm D ) shall operate through push button. Chair shall have regular tilt mechanism feature : 360 degree revolving type with single position locking & Chrome base fixed with 5 nos. Nylon castors . 6. Breathable Mesh Chair Backrest Moulds shall provide adequate back support, and makes the long hours of seating comfortable. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Medium back Cushioned Leatherette Upholstered Ergonomic revolving chair MEDIUM BACK CHAIR leatherette chair Providing and placing Mid Back chair. COLOUR BLACK The seat and back shall be made up of 1.2cm.thick hot pressed plywood upholstered with pure leatherette of required color and moulded Polyurethane foam. BACK SIZE: 53.0cm (W) X 73.0cm (H), SEAT SIZE: 54.6cm (W) X 49cm (D). The High Resilience Polyurethane foam is moulded with density=45+/-2 kg/m cube and hardness load 16+/-2 kgf as per IS: 7888 for 25% compression. The seat and back are arrested together with a 9.0cm (W) spine made of 0.8cm thick HR steel. The armrest tube assembly is made of 2.54cm x 0.16cm. M.S. E.R.W. support tubes and Chrome plated. The armrest top is made of ABS & upholstered with foam &leatherette . The pedestal is made of die-cast aluminum with buffing finished. It is fitted with 5nos. twin wheel castors. The pedestal is 67.0cm pitch-center dia (77.0 cm with castor). The twin wheel castors are injection moulded in Black Nylon. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Medium back breathable mesh fabric upholstered Ergonomic revolving chair 1. Medium Rise revolving chair. 2. Dimensions of Chairs: a) Seat: Width 500 mm +/- 10mm, Depth 480mm +/- 10mm b) Back Rest: Width 420mm +/- 10mm, Height from Seat 550mm +/- 10mm c) Minimum Seat Height 470mm +/- 10mm & Maximum Seat height 570mm +/- 10mm 3.Seat shall be made up of 12 mm thick hot pressed anti- termite water resistant plywood, upholstered with Breathable Mesh fabric and moulded polyurethane foam. The polyurethane foam density shall be 45 +/- 2kg/m3. 4. Chair back shall be made of 40 mm thick edge of PVC moulding with Breathable Mesh upholstery. The seat and back are arrested together with a 9.0cm (W) spine made of 0.8cm thick HR steel. Breathable Mesh Chair Backrest Moulds shall provide adequate back support, and makes the long hours of seating comfortable. 5. PU padded Adjustable handles (300mm W * 75mm D ) shall operate through push button. 6. Chair shall have regular tilt mechanism feature: 360 degree revolving type with single position locking & Chrome base fixed with 5 nos. Nylon castors. The pedestal is 67.0cm pitch-center dia (77.0 cm with castor). The twin wheel castors are injection moulded in Black Nylon All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Non revolving Visitor Chair Visitor Chair shall be of dimensions (560mm W x 670mm D x 1020 mm H ) Seat & Back Assembly : The seat & back shall be made of 12 mm thick hot-pressed plywood upholstered with Mesh type fabric cover & moulded polyurethane foam. The polyurethane foam density shall be of 45+/-2 kg/m3, The back foam shall be designed with contour lumber support for extra cushioning, Under structure shall be of MS elliptical/oblong pipe (40x20x1mm thick) chrome plated frame. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of High back mesh revolving Conference chair 1. High Rise revolving chair. 2. High Back Chair shall be of dimensions – 500 mm W* 500mm D *1125mm H approximately 3. Seat shall be made up of 12 mm thick hot pressed anti- termite water resistant plywood, upholstered with leatherette and moulded polyurethane foam. 4. Chair back shall be made of 40 mm thick edge of PVC moulding with Mesh upholstery. The polyurethane foam density shall be 45 +/- 2kg/m3. Chair Back shall be fixed with lumber support & fixed with Head rest for extra support. Lumber support ( 260mm W * 150mm H ) attached leatherette headrest shall be supported with 2 chrome plated rods of 20mm thickness from headrest to seat base. 5. PU padded Adjustable handles (260 mm W * 85mm D ) shall operate through push button. Chair shall have regular tilt mechanism feature : 360 degree revolving type with single position locking & Chrome base fixed with 5 nos. Nylon castors . 6. Netted Chair Backrest Moulds shall provide adequate back support, and makes the long hours of seating comfortable. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Medium back mesh revolving Conference Halls chair 1. Medium Rise revolving chair. 2. Dimensions of Chairs: a) Seat: Width 500 mm +/- 10mm, Depth 480mm +/- 10mm b) Back Rest: Width 420mm +/- 10mm, Height from Seat 550mm +/- 10mm c) Minimum Seat Height 470mm +/- 10mm & Maximum Seat height 570mm +/- 10mm 3.Seat shall be made up of 12 mm thick hot pressed anti- termite water resistant plywood, upholstered with Mesh fabric and moulded polyurethane foam. The polyurethane foam density shall be 45 +/- 2kg/m3. 4. Chair back shall be made of 40 mm thick edge of PVC moulding with Mesh upholstery. The seat and back are arrested together with a 9.0cm (W) spine made of 0.8cm thick HR steel. Netted Chair Backrest Moulds shall provide adequate back support, and makes the long hours of seating comfortable. 5. PU padded Adjustable handles (300mm W * 75mm D ) shall operate through push button. 6. Chair shall have regular tilt mechanism feature: 360 degree revolving type with single position locking & Chrome base fixed with 5 nos. Nylon castors. The pedestal is 67.0cm pitch-center dia (77.0 cm with castor). The twin wheel castors are injection moulded in Black Nylon All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Sofa set Single seater SOFA SET Providing and placing of Sofa's with Seat Height of 450mm. Slab stock foam with density 60+/-2Kg/m3 at seats and cushions. Seats and Cushion is also provided with 100% hollow recron fillers for extra comfort. Sofa structure consists of Tropical 12mm ply frame at the bottom on which S-Springs and Tie bars are provided then the complete structure is provided with layers of Non woven fabric, 2 Layers of Slab Stock Foam 80-100mm and finally recron is assembled together to form the final sofa. Seat and Cushions is upholstered with PVC Leatherite (shade should be approved from buyer) upholstery, Spring assembly of 4mm Dia is mounted in understructure for support and additonal cushioning purpose. Legs shall be provided made of Stainless Steel (Grade SS 202). It is a welded assembly made by the combination of Tube and Plate. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Sofa set 02 seater SOFA SET Providing and placing of Sofa's with Seat Height of 450mm. Slab stock foam with density 60+/-2Kg/m3 at seats and cushions. Seats and Cushion is also provided with 100% hollow recron fillers for extra comfort. Sofa structure consists of Tropical 12mm ply frame at the bottom on which S-Springs and Tie bars are provided then the complete structure is provided with layers of Non woven fabric, 2 Layers of Slab Stock Foam 80-100mm and finally recron is assembled together to form the final sofa. Seat and Cushions is upholstered with PVC Leatherite (shade should be approved from buyer) upholstery, Spring assembly of 4mm Dia is mounted in understructure for support and additonal cushioning purpose. Legs shall be provided made of Stainless Steel (Grade SS 202). It is a welded assembly made by the combination of Tube and Plate. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Sofa set 03 seater SOFA SET Providing and placing of Sofa's with Seat Height of 450mm. Slab stock foam with density 60+/-2Kg/m3 at seats and cushions. Seats and Cushion is also provided with 100% hollow recron fillers for extra comfort. Sofa structure consists of Tropical 12mm ply frame at the bottom on which S-Springs and Tie bars are provided then the complete structure is provided with layers of Non woven fabric, 2 Layers of Slab Stock Foam 80-100mm and finally recron is assembled together to form the final sofa. Seat and Cushions is upholstered with PVC Leatherite (shade should be approved from buyer) upholstery, Spring assembly of 4mm Dia is mounted in understructure for support and additonal cushioning purpose. Legs shall be provided made of Stainless Steel (Grade SS 202). It is a welded assembly made by the combination of Tube and Plate. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Office Work station Panel Based partition with Under Drawer type Storage Panel Based partition of 60mm thickness with framework made up of aluminium alloy extrusions. All Aluminium parts are pretreated for epoxy polyester powder coated of 40-60micron thickness. All these frame work sections are fitted to each other by screws which is properly zinc coated for corrosion resistant. One single frame consists of following Components :- 1.Vertical Members in aluminum alloy extrusion (thickness 1.6mm). 2. Top Horizontal Member in aluminum alloy extrusion of size 60x30mm(thickness 1.3mm). 3. Mid Member in aluminum alloy extrusion of size 60x22mm (thickness 1.3mm) having provision to support the worktop with engineered design Support bracket. 4. Bottom Raceway in aluminum alloy extrusion of size 140mm ht. x 60mm (thickness 1.2mm). 5. Intermediate Raceway In aluminum of size 140mm ht above / below the work top as per requirement. 6. Tiles THE BOTTOM tiles can be provided in following options:- (a) Prelaminated 9mm thick ISI Marked Plywood with decorative laminate on top and white balancing on unexposed face, The tiles are supported within groove in aluminium extrusion. (b) Metal tiles are made up of CRCA of 0.8mm thickness duly powder coated. The tiles are supported within groove in aluminium extrusion. THE UPPER tiles can provided in following options:- (a)The Fabric tile are made of 12mm high density soft board inside upholstered with response fabric supported with staple pins.The tiles are supported within groove in aluminium extrusion. (b)The Marker tile are made up of 9mm thick ISI marked Plywood pasted with 1mm white marker laminate, on the the exposed face The tiles are supported within groove in aluminium extrusion. (c) Fabric on Magnetic board tile are made up of GI sheet of 0.8mm inside upholstered with response fabric supported with staple pins. The tiles are supported within groove in aluminium extrusion. 7.Top& End Trims -The exposed vertical and horizontal faces of the frames. The trims are made of aluminum extrusions of size 60x19mm(thickness 1.5mm) and are covered with ABS caps on joints and ABS end trims. 8.Connectors:--Partitions are supported by Universal poles & MS bracket of 2mm thick zinc plated wherever required i.e,(L,T,+,180deg) for stability. At 2 Way joint of 90deg- Aluminium alloy extrusion of 60x60mm is provided which is fitted to main frame and epoxy powder coated. At 3 way joint of 90deg- Aluminium alloy extrusion of 60x60mm is provided which is fitted to main frame and epoxy powder coated. At 4 way joint of 90deg- Aluminium alloy extrusion frame Vertical member is fitted with M S connectors at top and WIRE MANAGEMENT - Partition has concealed wire management capabilities and are engineered for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cutouts are provided on Raceways to fix all electrical and data points. LEVELLERS - Levellor of M10 size are provided in each frame which allow 10-25mm adjustment for floor unevenness. Work top shall be of 25mm thick Block board of exterior grade conforming to IS 12406 with laminate finish of approved colour shade and pattern. Work Top shall have 2mm PVC edging of approved make, quality ,shade and colour on exposed area and 1mm on covered area. The Work top shall be supported with suitable M.S. bracket of standard size made of CRCA sheet of minimum 2mm thick Grade A as per IS 513 with powder coated finish of approved colour. Suitable size of metal inserts to be provided in worktop for fixing with the partition/gable end. Fixing directly with screws is not permissible. Under Table Storage : One Under table Drawer type storage cabinet having 03 Nos. drawers.The internal dimensions of top two & last drawers shall be 350(W) x 480(D) x 150(H) & 350(W) x 480(D) x 350(H)in mm respectively. The outer of above storage & drawers shall be made of 18mm thick plywood with 1.00mm thick laminate on all surfaces. All Drawers shall run on telescopic channel set. The telescopic channels & hinges shall be of make Hettich/ Hafele/Dorset/ Ozone or equivalent. The drawers shall have proper metallic brass/ Copper/ Stainless Steel/ Brushed finish handles of adequate size and proper separate locking arrangements. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Metal almirha STEEL STORAGE ALMIRAH Providing and placing metal storage. The overall approximate size of the storage shall be 900mm (W) x 450mm (D) x 2000mm (H). The construction shall be knock downconstruction with 1mm thick CRCA for shelf and 1mm thick for back. The door shall be made of 1mm thick CRCA and all other metal component shall be made of 1mm thick CRCA. The locking and handle of the storage shall be mazak handle with three way locking mechanism. The almirah should have 2 welded Legs of 75mm Width and 125mm Height made up of 1mm thick sheet which acts as a understructure of the storage. The shelving shall be height adjustable and shall have a load capacity of 40kg. The product shall be epoxy powder coated to the thickness of 50 microns as per sketch for item. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Conference Table Conference table shall be made up of 18mm thick ISI marked Water Proof, Termite Proof, Borer free Plywood with 1.00mm thick decorative laminates on all the surfaces. The Front modesty of the conference table shall be made up of 18mm thick plywood covered with 1.00 mm thick decorative laminates, Connection of Top with Leg (90 Degree * 690 mm). While the thickness of the side panels of standard tables shall be 18mm and it is 25mm in case of standard table with accessories the side panels shall be covered with 1.00mm thick decorative laminates. The edges shall be pasted with 2nd class teak wood bidding. The table legs or support shall have shoes cum levelers at the bottom of the side panels. The top shall be made up of 18mm thick plywood covered with decorative laminates on top & bottom, the width of table in plan shall be 700mm. Worktops of the the table shall have provision for cable managers on both the sides, through which the computer cables and other telecommunication cables can pass through and run from the bottom of the table to the top. These connection tops shall be joined using chrome plated metal legs, which provide strength to the tops. They shall be painted and not laminated so their edges are similar to that of the standard tables, which provides symmetry to the entire setup. Electrical & Other Accessories arrangements. The table shall have proper concealled provisions for accommodating Power, telephone, LAN, audio & video cables, ports for electric, LAN, monitors, PBAX, Printers etc. of approved make and requirements. The conference table shall be properly designed to accomodate the legs and chairs. The conference tables will be constructed for different hall of different capacity. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Three seater bench Legs & Armrest shall be SS with 1.2mm thickness. Seat & Back shall be 1.6mm SS perforated sheet The side bar shall be made up of solid steel 30x12mm with plastic inserts. The cross beam shall be made up of powder coated rectangular MSERW tube having 80x40x2mm (+/-2mm). The sheet shall be assembled on cross beam with the help of M8 bolts (per seat - 8nosi.e seat to bracket & 4nos bracket to cross beam). Overall dimension shall be:- seat height - 410mm & total height 710mm, width& depth as measured from pedestal i.e Width - 1600mm & depth 560mm with Tolerance of +/-0.05%. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge.

Providing, Supplying & Installation of Filling cabinet Four Drawer Filling Cabinet shall be of size: 470mm W x 620mm D x 1290mm H (approx), shall be made of MS powder coated CRCA sheet of 0.8 mm thickness completely as per IS standard; Powder coating thickness shall be of 40-60 microns with standard handles and locks. Height of each drawer shall be approximately305mm. Handles should be concealed. This shall have anti-toppling mechanism inbuilt to avoid toppling of the cabinet. Levelers shall be provided at bottom for height adjustment for 15-20mm on uneven surfaces. All work complete including Fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, standards, directions and satisfaction of Engineer Incharge