Ajmer Smart City Limited Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
₹ 1,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_ASCL_213182_1Bid Award Id
ViewTender No
ASCL/NIT67/2020-21/6035-37/01Tender Authority
Ajmer Smart City Limited ViewPurchaser Address
-Website
http://https://smartnet.niua.org/users/ajmer-smart-city-limited
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Add extra for over all depth of excavation above 3.0 m and upto 4.5 m over item no 2
2922.25
-
28
... More
Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.
:In hard rock (Blasting prohibited): Depth upto 1.5 m
1339
-
2315
... More
Add extra for over all depth of excavation above 3.0 m and upto 4.5 m over item no 3
1339
-
370
... More
Filling with locally available river sand at all levels including watering ramming consolidating and dressing complete including cost of sand.
1254.47
-
581
... More
Providing and fixing of precast concrete interlocking tiles of desired shape of M 30 grade manufactured from fully computerized automatic stationery hydraulic viebro pressed machine and fully computerized automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. Tensile splitting strength, abrasion and braking load etc. as per BS 6717:2001, Grey cement.
:80mm thick
1329.68
-
578
... More
Painting two coats on specified surface with synthetic enamel paint of approved brand and shade, after thorough cleaning and necessary filling to give even shade as per clause 803 of MoRT&H Specification including all material, labour.
:On steel surface
252.51
-
62.5
... More
Providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site
and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.
150
-
382
... More
Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade & PN-6 for potable water as per IS 4984 (amended upto date) in trenches complete with all accessories like Bend, Tee, Reducer, Stub end, End cap etc including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer.
: 110 mm dia
100
-
324
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :
:1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
989.95
-
3750
... More
Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete. sqm
233.72
-
269
... More
Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, buttresses, plinth
and string courses etc.
1663.66
-
240
... More
Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform.
3321.5
-
287
... More
Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers.
1538.16
-
269
... More
Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts.
754.79
-
254
... More
Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Stairs, (excluding landings) except spiral-staircases.
31.46
-
320
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :
:1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (As per design mix)
1505.36
-
5030
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement :
1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) (As per design mix)
266.42
-
5420
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement:
:M-25 Grade Concrete (1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) -As per design mix)
925.03
-
5590
... More
Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.
:Thermo-Mechanically Treated bars.
269680.67
-
51.5
... More
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (Thepayment of RCC band and reinforcement shall be made for seperately).
103.39
-
5310
... More
Random rubble masonry with hard stone in foundation and plinth :
Cement mortar 1:6 (1 cement : 6 coarse sand)
382.6
-
3190
... More
Extra for random rubble masonry with hard stone in superstructure above plinth level and upto two stories.
206.01
-
622
... More
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Raised and cut pointing
1046.4
-
260
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
33
-
5280
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
4092.6
-
87.5
... More
60mm thick cement concrete flooring with Metallic concrete hardener topping, under layer of 42mm thick cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 20mm nominal size) and top layer of 18mm thick metallic concrete hardener consisting of mix 1:2 (1 cement : 2 stone aggregate, 6mm nominal size) by volume & mixed with metallic hardening compound of approved quality @ 3Kg./Sqm including cement slurry, rounding off edges etc. but excluding the cost of nosing of step etc. complete.
2748.94
-
290
... More
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishingcomplete.
26.85
-
1160
... More
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
46
-
109
... More
S & F Steel railing of steel grade 304 made of top side of 50 mm diamter of 18 gauge & three pipes of 19 mm diamter of 18 gauge and vertical pipes of 50 mm diamter of
18 gauge 900 mm c/c complete Glossy or Partly glossy and Partly Mat finish.
10
-
1808
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
:In 75x75mm deep chase
107.92
-
136
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality
/make
110 mm dia Mtr.
30
-
306
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
:Bend 87.5 Dg.: 110mm dia Each
20
-
124
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make : Extra Square Jali 110mm dia Each
20
-
29
... More
Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix :
1:4 (1 cement : 4 fine/ coarse sand)
817.34
-
150
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
7009.31
-
126
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer.
6261.96
-
86
... More
Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm.
624.25
-
94
... More
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of :
i) Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the levelling course (levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.
ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportions.
iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
Using rough Kota stone.
2509.25
-
855
... More
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :
Using rough Kota stone
689.5
-
1080
... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
241.04
-
4370
... More
Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm- yard manure or/and good earth to be paid for separately).
2675.36
-
29.5
... More
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point. 6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. (Rates are included for modular switch and accessories instead of normal switch and accessories) Short point (up to 3 mtr.)
25
-
262.8
... More
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point. 6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. (Rates are included for modular switch and accessories instead of normal switch and accessories) Long point (up to 10 mtr..)
60
-
505.2
... More
Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. (Rates are included for modular switch and accessories instead of normal switch and accessories) On board
10
-
94.8
... More
S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 20 mm
500
-
20
... More
Wiring of 6 pin 15 amp. Light power point with 4.0 sq. mm PVC insulated unsheathed solid / stranded copper conductor 1.1 kV grade of approved make in surface / recessed ISI marked pvc conduit & it's accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board , 15 A switch, 15 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, bushes, check nuts, making connections, testing etc. as required. (Rates are included for modular switch and accessories instead of normal switch and accessories) Medium point (up to 6 mtr.)
5
-
746.4
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 4 x 1.5 sq.mm
300
-
52
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 x 2.5 sq.mm
200
-
42
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 x 4.0 sq.mm
200
-
64
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 4 x 6.0 sq.mm
300
-
192
... More
P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Single pole MCB 6 A to 32 A rating
45
-
161
... More
P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Double pole MCB 6 A to 32 A rating
6
-
434
... More
P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Four pole MCB : 40 A 63 A rating
4
-
1311
... More
P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs , testing etc. as required. 63 A rating each - Double pole isolator
6
-
468
... More
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder\ painted complete with copper bus bar, shorting link , neutral link, earth link and din bar masking sheet conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Double door (single phase) 16 Way
3
-
1806
... More
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder\ painted complete with copper bus bar, shorting link , neutral link, earth link and din bar masking sheet conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Double door (Three phase) 4 Way
2
-
2033
... More
P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.. ( Group - I )
180
-
17
... More
P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required Blanking plate
50
-
16
... More
SITC of walll/free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged doorwith locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator).
5
-
1800
... More
Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. Electrolytic grade aluminium bus bar
10
-
394
... More
SF of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type
1
-
1053
... More
SF of CT operated direct reading type Ampere meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A
1
-
1053
... More
SF of 240/220 V, LED (22.5 mm dia ) Pilot lamp with integral circuit, terminal block, including connection etc. as required. (a) Red/yellow/Green colour
3
-
120
... More
SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 13947-2 / IEC 60947- 2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push (test) to trip , including making connections with lugs / spreaders etc. as required With Thermal Magnetic Release up to 100 Amp , 16/25 kA, adjustable O/L & fixed S/C setting
2
-
7716
... More
Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 35.0 Sq.mm- 4 core
100
-
282
... More
Supplying and making one end termination with heavy duty double compression brass gland SIBG type, aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 4 x 35.0 sq.mm
6
-
292
... More
Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating With pipe in pipe technology with 80-100 micron G.I. coating G.I. pipe 2000 mm long , 50/25 mm , terminal 12 mm G.I. strip With pipe in pipe technology with 80-100 micron G.I. coating G.I. pipe 2000 mm long , 50/25 mm , terminal 12 mm G.I. strip set
4
-
2808
... More
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG G.I. Wire
80
-
10
... More
P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. 1200 mm Sweep 5 Star rated
1
-
1481
... More
P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaust fan, IS:2312 marked in existing opening including making connections testing etc. as required.300 mm sweep(900/1400 RPM).
1
-
2369
... More
P&F onload change over switch, front handle operated, four pole 415 V conforming to IS:13947 P-III including connections , testing etc. as required in the following rating: 63 A -With sheet steel enclosure
2
-
4754
... More
Providing & Laying XLPE insulated IS:7098/II/85 of approved make H.T.cable for working voltage 11 K.V.Earthed with Stranded Compacted Circular Aluminium Conductor, Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated, Insulation Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable direct in ground including excavation of 30cmx100cm size trench, 25cm layer of river sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size. 3 core 70.0 Sq.mm
100
-
771
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes . Indoor 3 core 70/95 Sq.mm
6
-
4536
... More
P & F of IP20 LED Ceiling/ Recessed/ suspended mounting light fixture made form CRCA sheet steel housing, high purity/ transmisivity diffuser for uniform light distrubution.High efficiency driver electronics having efficiency 85% and in compliance to IEC standards.(integral driver). Power consumption of 40 W/50W/60W, 3000/3300/4200 lumens, system lumen efficiency of 70-80 lm / Watt output suitable for 2x36W FTL/ 2x36w CFL/3x36w CFL light fixtures, life time of 50000 burning Hours with 70% intial Lumens maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE compliance. Surface Mounting 36W LED Light 2’x2’ with acrylic/ prismatic front cover
12
-
3601
... More
P & F of IP68, IK10 protected LED Buried marker light / Step Light Fixture. Fixture made of powder coated die cast alluminium with Toughened Glass cover and appropriate beam angle lens to be used as per requirement. The System level Luminous efficacy must be 90 Lumen/W. High Power LEDs at 1W/2W per LED. The driving current should be Minimum 350 mA per LED. CRI70, CCT: 3000/6500 K. The integralSMPS based electronic driver must be constant current and surge protection of min. 4KV(L-N) and efficiency 85%, PF0.9 and input Voltage range of 90-270V AC at50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained. Light should include quick connecting cable coupled with various mounting accessories. Light output in Cool white or Warm WhiteColour as per engineers choice. Fixture must be in compliance with IS/CE Standards. Rectanglar LED Marker Light
20
-
3637
... More
Supply and fixing of 11 kV, 400 Amp, 3- phase, central post rotating double break type isolator (IS:9921 part I to V) without earth blade gang operated horizontal type switch, operating mechanism with GI spring loaded reverse loop type fixed contact, solid hard drawn electolytic copper tubular moving contact with silver/ nickel plated at end points, 9 nos post insulator of 12 kV (IS:2554 & IS 5350 part III),
hot dipped galvanising hard ware, GI pipe, nut, bolts etc complete in
all respect as per specification of Discom.( Type tested by
ERDA/CPRI.)
1
-
16736
... More
Supply, Installation, Testing and commissioning of copper wound Transformers 33/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories with off load tap changer (+5% to -10% in steps of 2.5%), winding / Top --- temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5% of the maximum total loss values for 11 KV as per energy efficienc level - 2 at basic Insulation level conferming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014. Transformers described as above and as per the following continuous rating 250 KVA each
1
-
1144819
... More
Supply, Installation, Testing & Commissioning of HT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following:
(i) Provision for fixing Trivector Meter (To be supplied by DISCOMs) (ii) Provision for fixing of combined CT PT Set (To be supplied by
DISCOMs)
(iii)TT Block
(iv) 6mm Bakelite sheet on all sides.
1
-
25711
... More
P & F of IP 20 LED tube Light 20 watt with external batten made from CRCA sheet steel suitable to replace T-8/ T-12 tube light, internal driver, 2000 luman + 5% tolerance system luman efficiency of 100Lm/ watt minimum expected life time of 25000 burning hours, CCT5700 K, ANSI, CRI 80, driver efficiency85%, Life expectancy of driver min 30000 hrs. PF 0.95 at full load /230 volt AC.
Make:- Philips / HPL / Surya / Bajaj / Havell's / Crompton / Wipro / Syska / K-Lite / Lighting Science & EESL approved make.
185
-
280
... More
Providing, fixing, jointing and testing of Heavy Gauge (C class ) MS
Pipe ISI marked with accessories like tees, elbows, flanged joints, reducers, compressed asbestos gaskets, nuts and bolts including fixing the pipe with suitable flat iron strip clamps /bracket, painting etc. Complete as required for delivery/ suction manifold relating to the pump including painting of two coats of Red Oxide and two coat of post office red enamel paint including all civil breakages and making good the same : 200mm dia
150
-
1449
... More
Supplying & Installing cylindrical type air vessel, 250 mm dia 1.5M high of thickness 6.0 mm M.S. complete with air release valve, safety valve, pressure gauge etc.along with two coats of Red Oxide and two coat of post office red enamel paint as required.
2
-
3771
... More
Providing and fixing non return valve complete with bolts nuts washers and compressed asbestos gasket etc as required : 200 mm dia
1
-
40100
... More
Providing and fixing non return valve complete with bolts nuts washers and compressed asbestos gasket etc as required : 100 mm dia
1
-
10900
... More
Providing and fixing ISI marked Three Way fire Brigade Inlet to wet
Riser with non return valve complete in all respects
1
-
7592
... More
Providing and laying M. S. (Medium duty B class) pipe IS ; 1239 marked including all accessories such as screwed/ welded flanges, tees, reducers etc. Conforming to IS : 1239 complete including painting, welding, jointing and compressed asbestos gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of Primer & two coats of post office red primer paint fixed in ceiling, walls, columns for all heights with hangers/supports and fasteners including chasing of walls/ colums/ ceilings etc. and making good the same complete as required. 150 mm dia
180
-
877
... More
Providing and laying M. S. (Medium duty B class) pipe IS ; 1239 marked including all accessories such as screwed/ welded flanges, tees, reducers etc. Conforming to IS : 1239 complete including painting, welding, jointing and compressed asbestos gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of Primer & two coats of post office red primer paint fixed in ceiling, walls, columns for all heights with hangers/supports and fasteners including chasing of walls/ colums/ ceilings etc. and making good the same complete as required. 100mm dia
250
-
626
... More
Providing and laying M. S. (Medium duty B class) pipe IS ; 1239 marked including all accessories such as screwed/ welded flanges, tees, reducers etc. Conforming to IS : 1239 complete including painting, welding, jointing and compressed asbestos gaskets, nuts, bolts etc. as required. The pipe shall be painted with one coat of Primer & two coats of post office red primer paint fixed in ceiling, walls, columns for all heights with hangers/supports and fasteners including chasing of walls/ colums/ ceilings etc. and making good the same complete as required. 80mm dia
300
-
437
... More
Providing and fixing single headed hydrant valves with flanged inlet
ISI marked with 63 mm female instantaneous outlet of gun metal
complete with blank cap and chain conforming to IS : 5290
2
-
4426
... More
Providing . 63 mm dia 15 M long reinforced rubber hose pipe
conforming to IS : 636-1962, Part –A & ISI marked with Gun Metal
male & female coupling wire wound with the pipe.
2
-
4055
... More
Providing and fixing Swinging Drum type hose reel ISI marked 30M
(L) x 20 mm (dia) rubber lined pipe with shut off nozzle of 6 mm dia
including the cost of 25 mm dia pipe connection from riser to hose
reel , all sockets, nipples, elbows and 25 mm globe valve.
1
-
6956
... More
Providing & fixing (1.0 M x .45 M x 0.6 M ) OUTDOOR HOSE CABINET suitable for accommodating hydrants made of not less than 16 swg. M. S. sheet having central opening glazed door including necessary locking arrangement, painting (one coat primer & two coats of paint ) and housing 2 Nos. RRL hose pipe, 1 No branch pipe.
3
-
3313
... More
Providing and fixing suction coupling for fire brigade withdrawal of
water from tank with 150mm dia pipe and foot valve.( Pipe max 10 M
long )
2
-
4793
... More
Providing and fixing air release valve with air vessels at the top of
Risers. 250 mm dia, I Mtr long
1
-
3785
... More
Providing, fixing, testing & commissioning of sprinkler heads of the
following type : Sidewall Sprinklers (ordinary)
8
-
351
... More
Providing, fixing, testing & commissioning of sprinkler heads of the
following type : Concealed type but rated at 68 deg C.
80
-
378
... More
Providing & fixing Butterfly valve with Cast Iron Body, Cast Iron Disc and Seat of Nitrile Rubber Bonded on Bakelite with hard back to PN 1.6 rating with following sizes complete with bolts, washers and compressed asbestos gasket as required 150 mm dia
2
-
4159
... More
Providing & fixing Butterfly valve with Cast Iron Body, Cast Iron Disc and Seat of Nitrile Rubber Bonded on Bakelite with hard back to PN 1.6 rating with following sizes complete with bolts, washers and compressed asbestos gasket as required 100 mm dia
1
-
2988
... More
Providing and fixing 10 mm dia M S pipe drainage arrangement for
Sprinkler Headers including stop valve with a maximum Pipe length
of 5 Mtr.
1
-
1309
... More
SITC Smoke Detector (Dual Chamber ) Ionization type with
mounting base , LED , etc complete as required. Analogue addressable type
30
-
1743
... More
SITC Photo Electric type Smoke Detector with mounting base. LED,
with etc complete as required . Analogue addressable type
30
-
1597
... More
SITC Manual Call Point complete with , Glass, hammer and chain
etc as required: Analogue addressable type
1
-
1320
... More
SITC of wall / floor type following zone (each zone accessing 20 units ) Conventional Type solid state main control panel fabricated from 16 SWG CRCA sheet steel incorporating audio –visual indication for each zone with Public address system complete with 2x250W channel mixing amplifier , Required zone floor selector console, 1-No cardioid goose neck microphone , 1-No professional grade cassette deck 6-way PA selector with “ ALL CALL “, & sealed maintenance free (SMF) batteries of min 42 AH of 2X12 V. 24-Zone
1
-
138136
... More
SITC of electric driven Sprinkler / Hydrant pump Suitable for automatic
Operation consisting of the following
(A) Horizontal multi stage Centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary sluice value on the suction side ( all items to be matching the suction side of the pump) and pressure gauge sluice value and non return valve on the delivery side side ( all of the necessary dia) and including bypass arrangement for testing of pump (B) Squirrel cage induction motor suitable for 415 V, 50 HZ, Ac supply of below mentioned HP for the above pump ,1450 RPM T.E.F.C confirming to IP:55 and flexible coupling and coupling guard with the pump.
(C) Common bed plate fabricated from mild steel channel or cast iron type 1620 LPM at 70 Mtr Head ( 50 HP Motor)
1
-
167972
... More
SITC of diesel engine drive Standby Pump suitable for automatic
operation consisting of the following A, B, C. .The Diesel driven
pump shall be suitable for following discharge:
(A) Horizontal multi stage centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, sluice value on the suction side (all items shall be matching the suction side of the pump) and pressure gauge, sluice valve and non return valve on the delivery side (all of the necessary dia) and including bypass arrangement for testing of pump
(B) Water cooled Diesel Engine developing suitable BHP for the below mentioned discharge at 1800 RPM, flexible coupling and coupling guard with the Pump, common bed plate for mounting of the Engine and Pump, d cushy foot, damping arrangement by cushy foot, Diesel Engine starting Panel for starting of the engine automatically with a unit of battery of 12/24v, 88 Ah, 13/21 plate , Exhaust Pipe of minimum 10 M length, with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumping set, Supply, installation, testing, & commissioning of electric driven automatic pressurization pump set
C) Horizontally mounted single stage centrifugal end delivery pump of below mentioned discharge with necessary sluice valve on the suction side (all items matching the suction side of the pump) and sluice valve, non return value, pressure gauge on the delivery side including by pass arrangement for testing of the working of the pumping set as required 1620 LPM at 70 Mtr Head ( 50 HP Engine)
1
-
473184
... More
SITC of Jockey pump having Squirrel cage induction motor suitable for 415 V, 50 Hz AC supply with synchronous speed of 2900 RPM T.E.F.C type confirming to IP:55 and flexible coupling and coupling guard with the pump ,Common bed plate of fabricated mild steel channel or cast iron type. 180 LPM at 70 Mtr (15 HP)
2
-
76799
... More
Providing and fixing charged ABC type fire extingusher including the
cost of fixing with nut, bolts etc as required. 5 Kg
5
-
2647
... More
SITC Speaker cum electronic Hooter mounted in M S sheet box with
perforated front mesh for PA and Emergency System.
15
-
198
... More
Supply, Fabricating & installing following sizes of perforated cable
trays including horizontal and vertical bends, reducers tees,cross
members and other accessories as required and duly suspended
from the ceiling with suspenders and including painting as required. 100mm x 50mm x 1.6mm
250
-
226
... More
Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
2
-
5500
... More
S & Laying following size earth wire/strip in horizontal or vertical run
in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG copper Wire
50
-
84
... More
Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.95.0 Sq.mm 3.5 core
300
-
502
... More
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 3 x 95.0 sq.mm
10
-
150
... More
Providing and laying XLPE/PVC insulated & PVC sheathed armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction 2C x 1.5 sq.mm
300
-
120
... More
Providing and laying XLPE/PVC insulated & PVC sheathed armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction 2C x 2.5 sq.mm
150
-
124
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements