Water Resources Department Tender

... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.

Water Resources Department - WRD Tender

Works
Civil And Construction
Civil Works Others
Eprocure
Opening Date29 Apr 2025
Closing Soon7 May 2025
Tender Amount₹ 3,15,83,614 
Notes
Download

AI Insights

Class Of Bidder
... View More
The class eligibility requirements are Class A, Class C, and Class D.
Bid Capacity
... View More
The formula for bid capacity is: Assessed Available Bid Capacity = (A * N * 2 - B), where A is the maximum value of Civil Engineering works executed in any one year during the last five years, B is the value of existing commitments and on-going works to be completed during the period of completion of the projects, and N is the time period which varies from work to work.
Technical Capacity
... View More
The required prior work experience for the bidder includes details of contracts of similar nature and complexity. The bidder should provide information on the type of works, such as Canals/Roads/Bridges/Railways/Cross Drainage Works/Lining/Tunneling/Dams or others, and the country where the work was executed. For works above a certain value, the bidder should have a list of similar works completed during previous years, duly supported with performance certificates from the authority for whom the work was completed. The information should include the name of the work, estimated cost, date of start, and date of completion. The bidder should have satisfactorily completed in the last seven years and as a prime contractor (or as a nominated subcontractor) one work of value not less than 80% of the estimated cost or two similar works of value not less than 50% of the estimated cost of work or three similar works of value not less than 40% of the estimated cost of work. The bidder is required to have prior work experience, specifically for works similar to the one being bid on, with the number of years of experience to be specified. The bidder should have experience as a Prime Contractor, Joint Venture, or Subcontractor, with the country where the work was done. The value of similar works completed should be equal to or more than the appropriate class and category of WRD enlistment. However, no specific percentage of similar works completed is mentioned, except that the bidder should have completed similar works in the previous years. In terms of specific values, the bidder should have completed works of value not less than 80% of the estimated cost or two similar works of value not less than 50% of the estimated cost of work or three similar works of value not less than 40% of the estimated cost of work. The bidder should also have a minimum available bid capacity, calculated as per a specific formula, which is more than the total value of their financial bid. The bidder should also provide annual turnover data for the last five years, with the turnover amount to be specified. The bidder should also submit an undertaking that they will be able to invest a minimum cash amount of up to 25% of the contract value of the work during its implementation. Mentioned values and percentages include: - 80% of the estimated cost for one work - 50% of the estimated cost for two similar works - 40% of the estimated cost for three similar works - 25% of the contract value for the minimum cash amount to be invested - 10% of the contract value for access to lines of credit and other financial resources facilities.

Costs

  • EMD

    ₹ 6,30,000
  • Document Cost

    ₹ 500
  • Tender Fee

    ₹ 5,900

Summary

Estimate For Construction Of Tikkar Mata Scheme (civil Component)

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Providing, laying in trenches to correct gradient and alignment and jointing of HDPE pipes having ISI specification IS:14333 PE 100 Class PN-6 marked make Reliance/Hasti/Duraline o laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.

-

-

-

... More
Diameter outer 500mm

782.1

-

-

... More
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:4985-2000 Class 2(0.40Mpa) marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. (Working pressure 4kgf/sqcm)

-

-

-

... More
Diameter outer 450mm

471.8

-

-

... More
Diameter outer 400mm

357.3

-

-

... More
Diameter outer 315mm

337.7

-

-

... More
Diameter outer 280mm

335.3

-

-

... More
Diameter outer 250mm

346

-

-

... More
Diameter outer 180mm

1289.9

-

-

... More
Diameter outer 160mm

1810.2

-

-

... More
Diameter outer 125mm

603.4

-

-

... More
Diameter outer 110mm

603.5

-

-

... More
Diameter outer 90mm

1206.9

-

-

... More
Diameter outer 75mm

603.5

-

-

... More
Diameter outer 63mm

603.4

-

-

... More
Providing & fixing Cast Iron alpha-alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge

-

-

-

... More
Diameter Inner 175mm

1

-

-

... More
Diameter Inner 150mm

6

-

-

... More
Diameter Inner 120mm

1

-

-

... More
Diameter Inner 110mm

1

-

-

... More
Diameter Inner 100mm

1

-

-

... More
Diameter Inner 90mm

3

-

-

... More
Diameter Inner 75mm

1

-

-

... More
Diameter Inner 60mm

2

-

-

... More
Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marked as per IS code IS458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed.The pipes shall rest on the beds at all joints through their lengths and fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc. R.C.C. Pipe NP -3 Dia 450mm

33

-

-

... More
Cement Concrete 1:3:6 with stone ballast or shingle, mixing by mechanical means using concrete Mixer volumetric type

357.38

-

-

... More
Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge.

211.86

-

-

... More
Providing and Laying Cutting Edge of Mild Steel weighing 40 kg per metre for Well Foundation complete as per Drawing and Technical Specification.

1.43

-

-

... More
Plain/Reinforced Cement Concrete, in Well Foundation complete as per Drawing and Technical Specification. (Well Curb) RCC Gtade M20 using Concrete Mixer.

1.61

-

-

... More
Plain/Reinforced Cement Concrete, in Well Foundation complete as per Drawing and Technical Specification. (Well Steining) RCC Gtade M20 using Concrete Mixer

161.15

-

-

... More
Cold Twisted Deformed(Ribbed/Tor steel) Bars Fe500 as IS 1786-2008 for RCC work where not including in the complete rate RCC including bending and binding placing in position complete.

188.66

-

-

... More
Sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level.The rate inclusive of dewatering upto 10m.

10

-

-

... More
Cement Concrete 1:2:4 with stone ballast or shingle, mixing by mechanical means using concrete Mixer volumetric type

0.51

-

-

... More
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

130.45

-

-

... More
First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

83.21

-

-

... More
First class burnt brick work laid in cement sand mortar 1:5 in first storey above 4 metres Extra for c above 4 meters (where any single storey exceeds 4 metres in height) for every additional height of 2 metres or part thereof for Brick Work/ Concrete Block/ Clay Block.

3.14

-

-

... More
10mm thick cement Plaster 1:4

600

-

-

... More
12.5 mm thick cement plaster 1:4

650

-

-

... More
Providing and Fixing Foot steps / rungs for Haudies

120

-

-

... More
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

376.08

-

-

... More
Earth filling (a) (i) Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres

41.05

-

-

... More
Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.

1415.91

-

-

... More
Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge.( Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter

71.34

-

-

... More
Supplying and fixing of Japani sheet frames (Chowkhat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge.( Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.

15.24

-

-

... More
Shuttering for faces of concrete foundation and foundation beam and plinth beam (vertical or battering).

39.26

-

-

... More
Centering and shuttering for columns (Square or rectangular or polygonal in plain).

4.37

-

-

... More
Centering and Shuttering for flat surfaces such as suspended floors, roof , landings, chajjas, shelves etc.

122.38

-

-

... More
Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

5

-

-

... More
Reinforced Cement Concrete M20 mechanically batch mixed batch type concrete mixer as per IS1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth.

12.39

-

-

... More
Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded.

197.22

-

-

... More
Reinforced Cement Concrete M25 mechanically batch mixed batch type concrete mixer as per IS1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure.

608.68

-

-

... More
Preparation of Plastered or concrete surface for Painting (including sand Papering the surface using ready mix cement based wall putty by applying two or more coat to get a required finish.

440.43

-

-

... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

440.43

-

-

... More
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied@ 2.20 Kg/10 Sqm.

440.43

-

-

... More
Terracing consiting of tiles 22.86 x 11.43 x 3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing.

120.66

-

-

... More
Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

3

-

-

... More
Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3)

3

-

-

... More
Cement concrete 1:2:4 gola 10 cm x 10 cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

65

-

-

... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and fine sand and 100mm sand filling using mechanical mixer for mixing of material.

92.16

-

-

... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology ( thickness to be specified by the manufacturer ) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades , laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 fine sand), complete. (Solubal Salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished). Size 600x600 mm.

62.88

-

-

... More
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.

5.87

-

-

... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approvedmake in all colours, shades except burgundy, bottlegreen, blackof size200x300mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risersof step sand dados over 12mm thick bed of cement Mortar 1:4 (1cement:4 fine sand)and jointing with grey cement slurry@3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

51.93

-

-

... More
Black Granite stone tiles15mm to 20mm thick in skirting, risers of steps,dado wall sand pillars laid in 12.5mm thick cement mortar 1:3 (1cement 3coarse sand) and jointed with neat cement slurrymixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

1.65

-

-

... More
Wire gauge Hollock wood door shutter without springs housed in chowkhat. 35 mm thick.

12.6

-

-

... More
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973. A) Commercial with elm or gurjan facing on both/Sides with laminated core and lipped edges:- (ii) 35 mm thick.

27.31

-

-

... More
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt). For shutter area above 0.50 sqm.

47.47

-

-

... More
Applying pink primer or aluminum priming coat on woodwork including preparation of surface knotting and stopping etc.

26.26

-

-

... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered,concrete surface to give an even shade.

26.26

-

-

... More
Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect.Glazing area above 0.09 sqm.3 mm thick or 8.44 Kg/ sqm.

8.92

-

-

... More
Providing and fixing aluminum grill 6.3 mm including cost of necessary fittings i.e. screws,u-Type Beading etc. complete.

16.35

-

-

... More
Iron Fitting ISI Marked. (D) Sliding Bolt 250mm

22

-

-

... More
Golden Champ, wood, doors, shutter, windows,shutter including hinges, screws, chocks, cheats, stops, cords etc.complete fixed in position. (ii) 35mm thick.

16.35

-

-

... More
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footpaths).

315.04

-

-

... More
1.2 Meter High G.I. Barbed Wire Fencing (a) 1.2 meter high G.I. barbed wire fencing with 1.8 meter angle iron posts 40x40x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 9 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications

400

-

-

... More
Random rubble masonry or polygonal rubble masonry (Kentish Rag) or random or polygonal rubble built to courses in foundations and plinth in cement mortar 1:6

376.7

-

-

... More
Iron grated doors, including pintle hinges & arrangements.

12

-

-

... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.

30

-

-

... More
Painting new letters and figures of black synthetic enamel paint to an even shade

8700

-

-

... More
INTERNAL- EXPOSED ON WALL : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply,including al lCPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step PVC solvent cement and testing of pipes complete as per direction of Engineer-in Charge. c) SDR 11 CPVC pipes & fittings 25 mm o/d.

26.5

-

-

... More
INTERNAL- EXPOSED ON WALL : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply,including al lCPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step PVC solvent cement and testing of pipes complete as per direction of Engineer-in Charge.CPVC SDR 11 Pipe & fitting 32mm o/d.

22

-

-

... More
EXTERNAL IN THE GROUND : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS15778 (ISImarked with the prior approval of Engineer-in Charge),having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement,& testing of joints excluding cost of excavation complete as per direction of Engineer-in-Charge. .CPVC SDR 11 Pipe & fitting 32mm o/d.

25

-

-

... More
Providing and fixing H.C.I Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. with 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg).

4

-

-

... More
Making soak pit 2.5m outer Diametre 3.0 metre deep 230mm thick 1:5 brick work honey comb with bricks of Ist Class and S.W. drain pipe 100mm Diametre, 1.8m long complete as per standard design.With F.P.S. bricks.

2

-

-

... More
Providing & Fixing in postion C.I. bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineer-in charge ) complete in all respect.(ii) 20mm i/d

7

-

-

... More
Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.

1

-

-

... More
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.

1

-

-

... More
Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. Vitreous chinaware standard white pedestal for wash hand basin.

2

-

-

... More
Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.(CSR Item 30.47) .Sink with drain board overall size 1070x464 mm bowl size 430x355x200mm and waste coupling.

2

-

-

... More
Providing and fixing 110 mm dia. U.P.V.C Rain water pipe of 4kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer -in- charge.

40

-

-

... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in charge) with cover with suitable locking arrangement and making necessary holes for inlet,outlet and over flopipes but without fittings and base support for tank.(i) Triple Layer Tanks

2000

-

-

... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

2

-

-

... More
Providing and fixing jet spray with2'-6" long PVC pipe.

2

-

-

... More
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type A (b) 110mm o/d single socket SWR UPVC pipe lines laid complete

100

-

-

... More
01 HP branded water pump motor including fitting

1

-

-

... More
Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. (a) 25 litre capacity water heater.

2

-

-

... More
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealedmetal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches,16/20Amp.switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes ( Fourway PVC1½"deep for walls and CI 3"deep for ceiling), bonding to earth with PVC insulated copper conductor singlecore FR cable (ISImarked) 1sq.mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):

-

-

-

... More
Wiring fan point (With fan box).

6

-

-

... More
Wiring light point.

20

-

-

... More
Wiring call-bell point

3

-

-

... More
Wiring6Amp. Plug control comprising wall socket point

15

-

-

... More
Wiring 16/20Amp. power plug control point.

7

-

-

... More
PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE: (xii) Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge: CSR item no. 34.09)d Overall size 1.5sq.mm (48/0.20mm), 2 Core.

150

-

-

... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc.,as per PWD General Specifications:(CSR item no.34.12) ix) Heavy Gauge PVC Conduit Pipe 20mm dia. (Flushed).

150

-

-

... More
Earthing with G.I.wire/ rope in G.I.pipe partly recessed and partly on surface complete with 150 cm long 50mm dia.G.I. earth pipe (Cutting thread sand 36 Nos. holes, 1 cm dia. to make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc.,upto 14 metre in length (including boring & refilling).

3

-

-

... More
ON LOAD CHANGEOVER SWITCH: 34.22 A ON LOAD CHANGE OVER SWITCH (Without Sheet Enclosure): Supply and erection of On Load Change over Switch with advance neutral UNIT (Panel mounting Cubical type) in the existing Cubical Panel Confirms to IS 13947 (Part-3) complete wit hG.I. Bolts, Nuts & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:a) On Load Change Over Switch Four Pole 63amp., 415volts.

3

-

-

... More
Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and to the entire satisfaction of engineer-in- charge

120

-

-

... More
Sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level.The rate inclusive of dewatering (10-15m)

5

-

-

... More
Any other item

1

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.