Water Resources Department Tender

Providing of hollow bulb seal( Side Seal ) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Cold twisted deformed bars fe 500 grade for RCC work where not included in the complete rate of RCC i/c bending binding and placing in position

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with exacavated surplus soil.

Providing and Fixing Bracket mounted white color fan for Ceiling Type Fan size of ceiling fan 1200 mm , down rod length 300 mm , 3 no. blades , IS374:2019 marked with minimum 1 year Warranty

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Providing & Fixing MS J -Bolt with nut and washer dia 20mm complete in all respect and to entire satisfaction of engineer in-charge.

Dismantling brick work tile, masonry or tile lining in cement

Commissing and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge

12.5mm th. Cement plaster 1:3

Factory manufactured flush door fixed in position iron hinges , etc( excluding the cost of any fittings other than specified above but including labour for fixing the same in position ( a ) commercial with elm or gurjan facing on both / sides laminated core and lipped edges:- (iv) 35 mm thick

wiring light point with double control switches

Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing and Fixing MS Spindle of 2 Ton Capacity

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing single moulded Plastic Chair of IS 3663 Marked with Arms , minimum Seat width 345 mm, depth 340 mm, height 500 mm and Minimum 1 year of Warranty

Providing High Speed Diesel

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Nicking cement concrete surface (over 28days old including preparation and layingslurry

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level.

Providing and Fixing MS Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Providing Rectangular Table of IS marked with Seating Capacity minimum 4 person , length is 1200 mm , Depth 750 mm , height 750 mm and with material on top Prelaminated board , understructure Powder Coated MS , top finish Natural minimum 1 year warranty

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification

Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical and bartering including attached pillasters buttresses etc). Complete in all respect.

Wiring 16/20Amp. power plug control point

Any Other Item

Providing and fixing LED batten cool white color with complete fixture of 20 watt , IS certified with minimum life 50000 Hours

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.200mm o/d pipe of 6 Kgf. / sqcm

Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.

Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII)

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring fan point (With fan box)

Brass Casing as per IS specification & grade complete in all respect and to entire satisfaction of engineer in-charge.

CI Housing Cover with worm & worm wheel assembly shaft ,Handle GM Bust with triple start threading inside for spindle complete including labour charges

Alloy Steel casting as per I.S. specification & grade complete in all repects and to entire satisfaction of engineer-in-charge.

Providing and Fixing GI pipe of 1.5" dia complete in all respects and to entire satisfaction of Engineer-in-charge

Cement concrete 1:3:6 mixing by mechanical means using concrete mixer volumetric type

Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 75x10mm.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

-

Providing chequred plate 8mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Applying pink primer or aluminium priming coat on wood work including preparation of surface

Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide.