Water Resources Department Tender

Scraping Colour white was and colour wash (Exterior)

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below

Cement Concrete 1:8:16 With stone aggregates 40 mm guage mixing by manual means

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing

Providing and fixing 110 mm dia. U.P.V.C Rain water pipe of 4 kgf/sqm including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Providing and fixing 110 mm dia . U.P.V.C coupling/ sockets for Rain water pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface and interior

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Finishing walls with exterior decorative cement based such as snowecem, robbiacem etc. on old work one coat to give an even shade

Deodar wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position Panelled, glazed or glazed and panelled. 40mm thick (single leaf)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) : for fixed portion and chawkhats

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of engineer in charge.

Providing and fixing jet spray with 2'-6" long PVC pipe with C.P. brass nut.

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. Size 560mm x 430 mm x 820 mm

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect ( Rectengular sink with delux boarder single bowl overall size 555mm x 475 mm x 200 mm )

Providing & Fixingin postion 15mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect.( C.P. brass Bib cock 15 mm x 400 gm)

Providing & fixing in position PVC flexible tube connection of approved make ( To the approval of Engineer in charge ) complete in all respect.PVC tube connection of size 15mm x 450 mm with C.P Brass nut.

Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining for 110 mm o/d pipes (P trap/floor trap 110 mm x 110 mm )

Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining for 110 mm o/d pipes (P trap/floor trap 110 mm x 75 mm )

Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining for 110 mm o/d pipes (single Y-junction )

Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining for 110 mm o/d pipes (Elbow 90 degree all side sockets )

Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining for 110 mm o/d pipes (vent cowls )

Wiring in PVC insulated copper conducor single core FR cable (ISI marked ) overall 1.5sq. Mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25 mm dia ( 1.6 mm thick ) ISI marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxed (1.6 mm thick with brass lugs ) required for suitable number of modules ( modular aceessories ) for having step type electronic fan regulators ( two module ) 100 watts , bell push, 6 amp. 2/3 universal socket ( shuttered ), 16/20 Amp. combined/ universal socket (shuttered ), 6/10Amp. swithces, 16/20 Amp. switches with indicator etc. and covered with frame plate etc, PVC connetor ( for fan box and call bell), PVC bush , steel hooks, sheet metal fan box ( 1.6 mm thick shape hexagonal) CI circular junction boxes ( four way 1.5 " deep for walls and 3" deep for ceilling) bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked ) 1sq. mm 1100 volts grade ( for 6 Amp. wall socket & plug control point ) and othe petty material etc. including the cost of above material, cutting and filling up of chases ( with finishing the surface ) , ( Wiring light point )

Wiring in PVC insulated copper conducor single core FR cable (ISI marked ) overall 1.5sq. Mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25 mm dia ( 1.6 mm thick ) ISI marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxed (1.6 mm thick with brass lugs ) required for suitable number of modules ( modular aceessories ) for having step type electronic fan regulators ( two module ) 100 watts , bell push, 6 amp. 2/3 universal socket ( shuttered ), 16/20 Amp. combined/ universal socket (shuttered ), 6/10Amp. swithces, 16/20 switches with indicator etc. and covered with frame plate etc, PVC connetor ( for fan box and call bell), PVC bush , steel hooks, sheet metal fan box ( 1.6 mm thick shape hexagonal) CI circular junction boxes ( four way 1.5 " deep for valls and 3" deep for ceilling) bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked ) 1sq. mm 1100 volts grade ( for 6 Amp. wall socket & plug control point ) and othe petty material etc. including the cost of above material, cutting and filling up of chases ( with finishing the surface ) , ( Wiring fan point without fan box )

( M-73 ) Polythese films / sheet of 100, 125, 150, 200, 250 micron

12.5 mm thick cement plaster 1:4

Cement pointing 1:2 deep variety

Floating coat of 1:5mm thick neat cement laid in one operation to the topping

Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete in all respect as per direction of Engineer-in-charge.( Size 600x600 mm)

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position