Water Resources Department Tender

PLASTERING & POINTING 10mm thick Cement Plaster 1:4

PLASTERING & POINTING 10mm thick cement plaster 1 : 4 on floors.

Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marekd as per IS code IS 458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc. R.C.C. Pipe NP -3 ,(e) 300mm i/d pipe

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

R.C.C 1:2:4 Hand mixed

Supplying of RCC Shutter with One Extra Frame for Nakka and Branch Offtakes

Fixing of Shutter and Frames for Nakka and Branch Offtakes

Supplying & Laying Dry Brick Bats

Pulverized fly ash-lime bricks as per class 12.5 of IS 12894-002 laid in cement sand mortar 1:6 foundation and plinth. CSR 11.03(i)