Transport Department Tender

16/20amp. Universal Modular Shuttered Socket (two Module)

Step type Modular Electronic Fan Regulator 100watts (Two Module)

Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:-Modular Cover Frame Four Module

Modular Cover Frame Six Module

Modular Cover Frame Eight Module

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Make: Havells/ RR Kabel/ KEI/ Plaza/ Kunthkib/ Polycab/ L&T, Rellison, or Equivalent Overall size 1.5sq.mm (Un-sheathed)

Overall size 4sq.mm (Un-sheathed)

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- Make: Havell's, Legrand( DX3), Schneider (ACTi-9), L&T ( Exora), Hager (NCN), or equivalent MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Four Pole 50, 63amp. (10kA, Curve-C)

Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB/ RCCB/ RCBO as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB/ RCCB/ RCBO as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- Make: Legrent (Ekinoxe), Scheinder (Acti-9) L&T (Exora), Hager (Novella), Havells (Qve) or Equivalent. TP&N Horizontal Double Door Distribution Board 4 way each

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part- 1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Make : Polycab, KEI, Grandlay, R.R. Cable, Havells, L&t, Rallision or Equivalent. Overall size 10sq.mm (3Core) Un-armoured (Loose)

Overall size 50sq.mm (3½ Core) Un-armoured (Loose)

Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 90/76mm (Outer/ Inner dia.)

Supply and erection of Porcelain Fuse Unit with Extension Strip on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications :- Porcelain Fuse Unit 100Amp., 415volts with Extension Strip

Supply and erection of On Load Change over Switch with advance neutral UNIT in sheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connection on both sides of switch with sutiable size of thimbles as per PWD General Specifications:- Make: HPL/ L&T/ C&S On Load Change Over Switch Four Pole 250amp., 415volts (With Sheet Enclosure)

Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubicle type) in the existing Cubical Panel (Conforms to IEC:60947-2) having Ics=100%, Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with sutiable size of thimbles etc:- Make: L&T (D-sine), ABB (T-MAX), Schneider (CVS), Hager (H3), Legrend (DPS), Havells (Loadline) or equivalent. MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

MCCB Four Pole 250amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

Supply & Erection of indoor type MCCB enclosure of suitble size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977- 82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:- Make: L&T (D-sine), ABB (T-MAX), Schneider (CVS), Hager (H3), Legrend (DPS), Havells (Loadline) or equivalent. MS Sheet Enclosure having provision for MCCB 40- 160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm)

MS Sheet Enclosure having provision for MCCB 200- 630Amp.with extended rotary handle (Approx. Size 750mm x 300mm x 250mm)

S/E of LT Straight Through Joint Kit Cast Resin type for 1.1 KV grade PVC/XLPE cable as desired by the Engineer in charge of the site:- Straight Through Joint Kit Resin Cast type for Cable Size 3½ Core 240 sq. mm

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part- 1)1988 to be laid (On Surface) as per PWD General Specifications:- Overall size 10sq.mm (3Core) Un-armoured (On- Surface)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Make: Havells/ RR Kabel/ KEI/ Plaza/ Kunthkib/ Polycab/ L&T, Rellison, or Equivalent Overall size 1.5sq.mm (Un-sheathed)

Supply and erection of SMC FRP (Glass Fibre reinforced polyester sheet moulding compound conforming to IS:13410) Junction Box (Recessed/ On surface) conform to IS:14772, robust constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site. SMC FRP (Glass Fibre reinforced polyester sheet moulding compound confirming to IS:13410) Junction Box conform to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement

Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB/ RCCB/ RCBO as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB/ RCCB/ RCBO as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- Make: Legrent (Ekinoxe), Scheinder (Acti-9) L&T (Exora), Hager (Novella), Havells (Qve) or Equivalent. SP&N Double Door Distribution Board 4 way each

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- Make: Havell's, Legrand( DX3), Schneider (ACTi-9), L&T ( Exora), Hager (NCN), or equivalent. MCB Double Pole 6-32amp. (10kA, Curve-C)

Supply and Erection of LED Flood Light 120watt (including LED driver) with pressure die cast aluminium housing with control gear ( with IP 65/ IP 66 protection), CRI Minimum 70, CCT 5700K, toughened glass fitting, LED fixture minimum 120 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection (as per BIS standards) , surge protection 10kv and above (as per (IS/IEC standards) wattage of each LED High power LED of 1 watt to 5 watt with mandatory modular lenses, input AC frequency 50 Hz ± 3 % 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no AT-2021/GL 1410-1422 Dated 06/05/2021. Dated 06/05/2021. Besides this the lighting fixture manufactures should have in house NABL accredited labortary.