Sardar Swaran Singh National Institute Of Bio Energy Tender

S/F of Auto sensor facility for Glass door: Automatic Sliding Door Operator with the convenience of motion sensor, Door Parameters: 2-panel sliding door Passage width-1000 mm Door panel weight 2 x 80 kg, Door Height Max. 2700 mm. Components: Power Switch, Dorma Bldc Drive Dorma Carrier, Dorma Control Unit, Drive Belt, Dorma Activator, Dorma Remote Key, etc with complete electrical fitting.

Supply and installation of customized Roller Blinds: Providing and fixing of customized Roller Window Blinds: Polyester fabric, waterproof, anti-static, dust-proof roller shades for windows, Thermal Insulated as per the approved fabric, as per the approved fabric, colours and Size and Size. Supplying fitting and fixing Roller Blind with 100% Polyester fabric of revolving Translucent type. Nominal thickness of fabric shall be 1.0 mm and nominal weight 350 grams per square metre, hanging excellent hanging properties and very high tearing strength, Coating of the fabric shall be of Acrylic, which shall be resistant to cracking and fraying. The fabric shall be suspended from the top channel made of extruded anodised alloy of 1.5 mm nominal thickness and 40 mm nominal diameter. The top channel shall be fixed with powder coated mild steel brackets with clutch assembly on either end of blind, fixed to jambs of the window opening with 50 mm stainless steel screws and to the aluminium window with 25 mm stainless steel screws. The operating mechanism fixed to the top channel shall be made of high strength ABS plastic having ultra-smooth gear with spring booster of high carbon steel. The mechanism shall be operated with tilt chain having balls made of ABS plastic linked with high quality polyester chord. The mechanism shall allow the blind to stop in desired position with the help of stop lock. The bottom channel shall be of aluminum tube of 30 mm nominal diameter and 2.5 mm nominal thickness. The fabric shall be enclosed in suitably created pocket along the tubes, which shall be closed from side with end caps of same colour to the bottom roller.

S/F LED Ultra Slim Ceiling Down Light 36W Panel Lights: Wattage (W)-36, CCT/Colour-6500K, Current (A)- 0.16, Dimension 595 X 595 MM, Lumens-3100 Robust & Sturdy fixture (Metal Body)HPF LED Driver with 0.9 Wide light distribution

S/F Sofa (3 Seater Sofa ): Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section devoid of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over under structure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic end cap. The product company should be ISO-9001: 2015, ISO-14001:2015, ISO-45001: 2018, BIFMA and AIOTA certified.

S/F Sofa (2 Seater Sofa ): Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Under structure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section devoid of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over under structure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic end cap. Company should be ISO-9001: 2015, ISO-14001: 2015, ISO-45001: 2018, BIFMA and AIOTA certified.

Centre /Coffee table: L x W x H – 1100 x 600 x 426 Table-top – 8 mm Toughened Brown tinted Glass top PLT – 18 mm thick in Cinnamon Configuration – Concealed storage + Shelf Storage.

Supply and Installation of Energy Efficiency 5 Star Split AC- 2 Ton: Supply, installation, testing and commissioning the following capacity of wall mounting, high energy efficient, single phase, inverter type, split air conditioner unit (IDU) having 5-star rating as per BEE, fitted with hermetically sealed rotary compressor (ODU) suitable for eco-friendly and energy efficient refrigerants R-32A / R-410A, conforming to IS: 1391 Part-2 1992 (with latest amendments except power consumption norms) suitable for operation on 230 V, 50 Hz AC supply and capable of performing functions such as cooling, dehumidifying, air circulating, filtering etc and having features of long distance piping flexibility, wide angle air flow, IDU noise level < 43 dB (A) and ODU noise level < 56 dB (A) as required. The condensing and evaporating coils should be made of copper tubes (100% copper) and a standard length of upto 3 metres of soft drawn bright annealed copper refrigerant pipes of suitable sizes should be supplied along with the AC unit for the function of suction and discharge and the copper pipes should be properly insulated with 10 mm thick closed cell Class O elastomeric nitrile rubberised foam sleeve insulation. A standard length of upto 3 metres of suitable size ISI marked flexible copper control cable for electrically connecting IDU and ODU of AC unit and microprocessor based wireless remote controller with required number of suitable batteries should also be supplied along with the AC unit as required. There should be 3 numbers of comprehensive free service for the AC unit (IDU & ODU) for one year, applicable from the date of commissioning. One-year replacement warranty should be provided for the entire AC unit along with two years exclusive warranty for PCB (Make- Legrand, OBO Betterman, MK India or Clipsan) and ten years exclusive warranty for the compressor. 2-Ton 5-star split type inverter AC unit.

S/F Voltage Stabilizer for Inverter AC: Up to 1.5- 2.0 Ton 5 KVA 4000W 160V-280V (IS certified)