Punjab State Transmission Corporation Limited Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Technical
Technical
Class Of Bidder
... View More
Ist class
Bid Capacity
... View More
To determine the bid capacity required, we need to analyze the provided information. The bid capacity is related to the financial capability of the bidder to undertake the project. One relevant formula is the calculation of the minimum solvency certificate amount, which is directly tied to the bidder's financial capability. This formula is: Minimum Solvency Certificate Amount = (Tendered Cost / Completion Period) Additionally, the bid capacity requirements include:
- Average Annual financial turnover during the last 3 years: at least 30% of the estimated cost.
- Experience of having successfully completed similar works during the last 7 years, with specific requirements based on the estimated cost. However, specific details such as the estimated cost value are not explicitly provided, making it challenging to calculate the exact bid capacity required. Given the information and the requirement to extract bid capacity having value and formulas, the answer is: Minimum Solvency Certificate Amount = (Tendered Cost / Completion Period) And the bid capacity requirements of - Average Annual financial turnover during the last 3 years: at least 30% of the estimated cost.
- Experience of having successfully completed similar works during the last 7 years: + Three similar completed works costing not less than 40% of the estimated cost. + Two similar completed works costing not less than 50% of the estimated cost. + One similar completed work costing not less than 80% of the estimated cost.
Technical Capacity
... View More
The bidder should have satisfactorily executed similar work, with the following prior work experience: i) Average Annual financial turnover during the last 3 years should be at least 30% of the estimated/DNIT cost. ii) Experience of having successfully completed similar works during the last 7 years, with the following options:
a) Three similar completed works costing not less than 40% of the estimated cost.
b) Two similar completed works costing not less than 50% of the estimated cost.
c) One similar completed work costing not less than 80% of the estimated cost. Similar works include Construction of Switch House Building and Yard Foundations for structures of 66/132/220 KV Sub-Station or Construction of any other building work or bridge work or other works involving RCC Foundations.
Costs
EMD
₹ 9,26,800Document Cost
Refer DocumentsTender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_POWER_133711_1Tender No
CWJ/T-24/2024-25.Tender Authority
Punjab State Transmission Corporation Limited ViewPurchaser Address
-Website
http://http://punjab.gov.in/power
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of all technical civil works for upgradation of 66 KV S/S Nawapind to 220 KV S/S.
BOQ Items
... More
Dismantling Reinforced cement concrete .
271.21
1967
-
... More
Dismantling Cement concrete plain1:2:4 mix .
13.72
1218
-
... More
Scraping: Bricks dismantled from brick work in lime or cement.
338.26
1410
-
... More
Shuttering for faces of concrete foundations and foundation
beam & plinth beam (vertical or battering)
1812.66
187
-
... More
Centering and shuttering for columns (Square or rectangular
or poly gonal in plain)
2916.79
425
-
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
350.26
339
-
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
1976.91
475
-
... More
Cement Concrete 1:8:16 with 40mm gauge stone aggregate(mixing by mechanical means using concrete mixer volumetric type) .
45.8
2298
-
... More
Cement Concrete 1:6:12 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)
298.98
2292
-
... More
Cement concrete 1:5:10 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
47.06
2286
-
... More
Cement concrete 1:4:8 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
101.45
2271
-
... More
Cement Concrete 1:2:4 with stone ballast or shingle (mixing by mechanical means using concrete mixer volumetric type)
327.68
2386
-
... More
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
663.26
2762
-
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
292.04
2771
-
... More
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure .
137.41
3431
-
... More
Damp proof course 7.5 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded.
40.35
343
-
... More
Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines.
8.83
146
-
... More
Supplying & laying dry brick bats
107.01
885
-
... More
First class burnt work laid in cement sand mortar 1:7 in foundation and plinth
38.03
4088
-
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth .
331.63
4076
-
... More
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth
117.27
4078
-
... More
First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level.
13.64
4201
-
... More
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth
131.53
4081
-
... More
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level
138.89
4203
-
... More
First class burnt brick work laid in mud mortar in foundation and plinth
10
3389
-
... More
115mm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth .
237.6
490
-
... More
Extra labour for First class burnt brick masonry in well steining of circular well.
48.03
1766
-
... More
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.
952.5
620
-
... More
Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16
23
59
-
... More
Bottom Khurra on ground 1.2mx0.6m consisting of brick on edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3
23
491
-
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
166.66
40
-
... More
Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings , specifications and to the entire satisfaction of engineer-in- charge.
422.45
1179
-
... More
Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge.
86.75
207
-
... More
Providing and fixing 110 mm dia UPVC bend for rain water pipe as per IS : 14735 including jointing as per specifications and to the entire satisfaction of Engineer-in-charge. UPVC 110 mm bend
15
120
-
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone agg. 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material
740.88
310
-
... More
Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
1035.63
167
-
... More
Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
954
219
-
... More
Flat brick or tile flooring laid in cement sand mortor 1:4 on 100mm thick cment concret 1:8 :16 and 100mm thick sand filling and cement pointed 1:2 on top.
528.29
693
-
... More
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in jointsincluding corners angles and beading.
50.7
556
-
... More
Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design ishomogenous throughout the tile body ).Size 600x600 mm
740.88
886
-
... More
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand).
84
946
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
92.4
591
-
... More
12.5 mm thick cement plaster 1:3
420.77
133
-
... More
12.5 mm thick cement plaster 1:4
1462.34
135
-
... More
12.5 mm thick cement plaster 1:5
1304.92
135
-
... More
12.5 mm thick cement plaster 1:6
42.21
134
-
... More
20 mm thick cement plaster 1:4 in two coat work
2197.34
182
-
... More
20mm thick cement plaster 1:5 in two coat work
112.24
182
-
... More
Plastering on underside of ceiling 10mm thick cement plaster 1:4
683.68
131
-
... More
20mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per Sqm laid hot and sanded.Vertical
305.46
255
-
... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
97.56
21
-
... More
Painting two or more coats with aluminum paint to give an even shade excluding priming coat
97.56
56
-
... More
Painting two or more coats with anticorrosive bitumastic Paint to give an even shade
23.79
48
-
... More
Finishing walls with acrylic smooth exterior paint of required shade with two coats applied@ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
439.61
107
-
... More
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
2674.19
79
-
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
2674.2
71
-
... More
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings(Excluding sliding bolt).For shutter area above 0.50 sqm
5
99
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. Glazing and paneling to be paid for separately) : For fixed portion and chawkhats
962.55
314
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. Glazing and paneling to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required
1155.19
328
-
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre laminated particle board with decorative lamination on Both side.
37.6
1025
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) Float glass panes of 5 mm thickness
104.72
924
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer in-charge.
14
1662
-
... More
Steel work fixed independently without connecting plates including cutting hoisting and fixing in position: R S Joists
28.74
5800
-
... More
Steel work fixed independently without connecting plates including cutting hoisting and fixing in position:FLATS (Labour Rate)
407.38
951
-
... More
Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects.Above 20mm dia bars (Labour Rate)
233.21
822
-
... More
Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-1985) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete. (Labour Rate)
859.7
780
-
... More
Welding by gas or by electric plant, including carriage to and from workshop etc.
24390
2
-
... More
Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work.
2037.74
60
-
... More
Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications
258
1409
-
... More
Brick on end edging Providing and laying of Brick on end edging
6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications
450
64
-
... More
Boring for hand-pump in clay fitting strainer and pipe.Above 75mm dia bore but not exceeding 100mm.From 0 to 15 m.
1050
107
-
... More
Boring for hand-pump in clay fitting strainer and pipe.Above 75mm dia bore but not exceeding 100mm. Exceeding 15 m but upto 30 m.
1050
252
-
... More
Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications 110mm o/d PVC pipe of 4 Kgf. / sqcm
4
279
-
... More
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.15mm i/d
150
263
-
... More
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.20 mm i/d
60
320
-
... More
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.15mm i/d G.I. Union
12
81
-
... More
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.20mm i/d G.I. Union
8
134
-
... More
Providing, fixing and jointing ISI Marked Gun Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.20mm i/d Gun Metal peet valve heavy pattern.
3
502
-
... More
Providing, fixing and jointing ISI Marked Gun Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.25mm i/d Gun Metal peet valve heavy pattern.
3
690
-
... More
Providing & fixing Cast Iron suface box for Peet Valve, Stop Cock including all carriages complete.
6
71
-
... More
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. Through wall 22.86 cm thick
15
213
-
... More
Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good the same & finishing according to existing finish where required. Through floor or roof 15.00cm thick
3
157
-
... More
Excavation manually in trenches with straight or open cutting in built up street/ lane having wall to wall width of street/ lane upto 3.0 metre, for intramural sullage drains, extramural intercepting drains and outfall drains, storm water channels and other work contingent or incident thereto, to full dimensions and depth as shown on the drawings or as shall be required by Engineer in-charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic. Providing and fixing and maintenance of caution boards, fencing, night signals, for leads upto 15m and for all lifts and subsequent refilling, watering and dressing upto groung level, including removal of surplus spoil from the site upto 15 metre distance complete in all respects. All classes of soil except rocky
200.02
152
-
... More
Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses,
sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent
filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all
respects.Depth upto 1.5 m B.G.L All classes of soil except rocky
30.72
74
-
... More
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm
x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as
per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even
after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone
aggragate) complete as per design.
30
186
-
... More
Providing and fixing RCC manhole covers only 500mm i/d RCC man hole cover only as per ISI Heavy duty
5
943
-
... More
Providing and fixing RCC manhole covers only 450mm i/d RCC man hole cover only as per ISI Extra Heavy duty
6
908
-
... More
Providing and fixing RCC manhole covers only 450mm i/d RCC man hole cover only as per ISI Light duty
6
627
-
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal
8
4341
-
... More
Extra for every 0.30 metre depth of inspection chamber. 450mm x 450mm inside
4
1035
-
... More
Providing, lowering, cutting & jointing salt glazed stone ware pipes and specials ISI marked as per IS: 651-2007 class Sp-1 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc., cutting of concrete beds and joints holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching, haunching and envelopes are completed including jointing of pipes and specials in trenches, using cement sand mortar 1:1 and best spun Jute yarn as per IS:1887, finishing and trowelling of each joint at an angle of 45 degree with the longitudinal axes of pipe, watering, keeping the joint covered and wetted till the same are cured, testing the sewerage line for leakage and making all leakages and defects good as laid in the contract specification, chipping and finishing the cut surface to uniform finish to the entire satisfaction of engineer-in-charge Including all cartage etc complete in all respects.100mm i/d pipe
145
254
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:2 (1 cement : 2 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete. For pipes 100 to 250 mm Diametre
72
300
-
... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
6
4267
-
... More
Extra for providing and fixing C.P. Brass short flush bend 32mm instead of PVC short bend.
6
229
-
... More
Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.
6
2666
-
... More
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
12
100
-
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. Size 550 mm x 400 mm x 815 mm
6
3226
-
... More
Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required by the Engineer-in-charge.
1
552
-
... More
Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. Vitreous chinaware standard white pedestal for wash hand basin.
6
1794
-
... More
Providing and fixing in position stainless steel sinks of approved make (to theapproval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm
4
6910
-
... More
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P. brass towel Rails size 15mm dia 610mm long
6
1374
-
... More
Providing and fixing in position C.P. Acrylic shelf with C.P. bracket and guard rails of approved make (to the approval of Engineer in-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect CP brass Acrylic Shelf size 560mmx130mm
6
1490
-
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) Size 600mmx450mm
6
1070
-
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.C.P. brass Bib cock foam flow without flange
16
818
-
... More
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.C.P.brass 15mm stop cock Male and female end
15
716
-
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
20
162
-
... More
Providing and fixing in position Centrifugally cast iron soil waste vent or antisyphonage pipes single socket to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing. 100mm i/d single socket Centrifugally cast iron pipe lines laid complete
12
909
-
... More
Providing and fixing in position Centrifugally cast iron soil waste vent or antisyphonage pipes single socket to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing. 75mm i/d single socket Centrifugally cast iron pipe lines laid complete
24
783
-
... More
Providing and fixing in position gratings 150mm x 150mm for gully trap.H.C.I. grating including painting with black bitumastic superior paint of approved manufacture three coats.
6
86
-
... More
Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification of E.L.C. manufacture or any other reputed firm including cost of lead yarn,fuel and tools
etc. 100mm i/d (1.36 kg.)
4
330
-
... More
Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification of E.L.C. manufacture or any other reputed firm including cost of lead yarn,fuel and tools
etc.75mm i/d (1.13 kg.)
4
272
-
... More
Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg)
10
883
-
... More
Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 100mm i/d pipes 100mm i/d H.C.I. Heal Rest Bend
10
567
-
... More
Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 100mm i/d pipes 100mm i/d Cowls
10
357
-
... More
Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.For 75mm i/d pipes 75mm i/d H.C.I. Heal Rest Bend
6
463
-
... More
Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.For 75mm i/d pipes 75mm i/d Cowls
7
253
-
... More
Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.For 75mm i/d pipes 75mm i/d Collars
8
262
-
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Triple Layer Tanks
1000
9
-
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in copingaround cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
1
1635
-
... More
RECESSED HDPE PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall 1.5sq. mm, 1100volts grade to be laid in HDPE electrical conduit pipe 20mm/25mm dia. ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick withBrass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm,1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring fan point (Without fan box)
45
926
-
... More
Wiring fan point (with fan box)
25
1023
-
... More
Wiring light point
80
658
-
... More
Wiring call-bell point
12
645
-
... More
Wiring 6Amp. Plug control comprising wall socket point
85
305
-
... More
Wiring 16/20Amp. power plug control point
45
388
-
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
overall size 1.5 sq.mm (un-sheathed).
1000
20
-
... More
overall size 2.5 sq.mm (un-sheathed).
2500
31
-
... More
overall size 4 sq.mm (un-sheathed).
2600
45
-
... More
HEAVY GAUGE WELDED CONDUIT PIPES:Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
... More
HGW Conduit Pipe 25mm dia. (1.6mm thick) On Surface
1550
102
-
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)
25
48
-
... More
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Single Pole 0.5-4amp. (10kA, Curve- C)
50
251
-
... More
MCB Single Pole 50, 63amp. (10kA, CurveC)
20
386
-
... More
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&Ndistribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
... More
SP&N Double Door Distribution Board 12 way each
8
1523
-
... More
Supplying and fixing Acid Vapour Proof Tube Fitting of Crompton Make (MODEL T5PFC11228EB) of 2x28 WT-5
15
2291
-
... More
Supplying and Fixing General Purpose tube Fitting of 20 watts LED of Havells make.
40
617
-
... More
Supplying & Fixing 15 watt Panel Trim Havells Round downlitter.
35
740
-
... More
Supplying and fixing ceiling light of 42 watt 2' x 2' fitting of Havels make.
45
3220
-
... More
P & F of ceiling fan 1400mm sweep of crompton make.
45
1506
-
... More
Supplying and fixing exhaust fan 12" sweep of Crompton Make including louver (MODEL T5JB1328EB) of 1x28 W T-5
6
1772
-
... More
Supplying and fixing exhaust fan 18" sweep of Crompton Make including louver (MODEL T5JB1328EB) of 1x28 W T-5
8
3269
-
... More
Prov./Fixing top post lantern (Gate Light) lantern of Crompton Make
8
1778
-
... More
P/F of Steel gate type G-2 5.80 mtr wide as per Arch. Drawing
4
24868
-
... More
P & F of MS Tappered washers/Cleats 65X65X19 to 6mm
272
35
-
... More
P & F MS Base Plate 235X220X12mm for T/f Plinth
68
364
-
... More
P&F of MS Angle Nosing 50x50x6mm for T/f plinth
57.4
306
-
... More
P&F Angle Iron Posts of various sizes and shapes as per PSTCL Drawing.
17117
63
-
... More
P & F MS anchor bolt 12.5x300
384
20
-
... More
P&F of GI wire netting mesh of 12 gauge 50x 50 mesh 180cms. High fastened with 4 nos. Ms wire rope 6/7 stands 1/6" dia each complete in all respect as per drg no. HW/TB-5635R-2 and Arch Drg. No.3Rs/ Job no. 112/S conforming to is 2721/1974 and 3549/1977 respectively
599.85
426
-
... More
P&F 1mtr wide uc fencing gate for station T/f
1
3073
-
... More
P/F 30X30X3mm Angle Iron nosing for indoor cable trenches
100
116
-
... More
P/F MS checquered plate 5mm thick
1546.55
68
-
... More
Cable Racks of various sizes
3787.44
69
-
... More
P&F Angle iron Nozzing 50x50x3 mm for cable trenches
1280
156
-
... More
S&F Trench Cover 2'8"x1'6" R- type, T-1 & T-2 Type
1050
582
-
... More
S&F Trench Cover 2'6"x1'9" T-4 Type
480
649
-
... More
S&F Trench Cover 2'2" x2'2" T-3 Type
666
682
-
... More
P & F of 3BHP NON Clog Pump of 3 BHP 3 phase of Crompton Make
4
31497
-
... More
P & F of barbed wire fencing consisting of glavanised steel barbed wire having dia 2.24mm( 2 Ply) barbed with 4 points as per IS 278/1962 i/c all fittings such as U clamp tighting nuts and bolts unrolling and strching complete in 4 rows
599.85
88
-
... More
P & F of wire mesh of 22 Gauge 12mmX12mm in aluminium door and window.
201.97
450
-
... More
Cement Slurry of cement to sand ratio 1:6 with cement content not less than 150kg/100 sqm
8964
53
-
... More
S & laying of gravel
672.3
1147
-
... More
Laying PCC Flooring
672.3
3481
-
... More
Cost of Earthfilling
22599
472
-
... More
P&F Template
415
200
-
... More
Recovery of bricks
338258
5
-
... More
Recovery of brick bat
469.8
450
-
... More
Recovery of tiles
20140
5
-
... More
Recovery of tiles bat
25.85
450
-
... More
Recovery of steel scrap
19864
35
-
... More
Extra Carriage of materials & diff. of rates of material- Cement
559.16
424
-
... More
Extra Carriage of materials & diff. of rates of material- Steel
85.97
309
-
... More
Extra Carriage of materials & diff. of rates of material- Crushed bajri 13.2mm
500.95
278
-
... More
Extra Carriage of materials & diff. of rates of material- Fine sand
734.61
240
-
... More
Extra Carriage of materials & diff. of rates of material- Bricks
65830
-
-
... More
Extra Carriage of materials & diff. of rates of material- Crushed bajri 11.2mm
500.95
313
-
... More
Extra Carriage of materials & diff. of rates of material- Coarse Sand
505.99
505
-
... More
Extra Carriage of materials & diff. of rates of material- Stone metal 40mm
537.81
278
-
... More
Extra Carriage of materials & diff. of rates of material- Stone metal 63/45mm
422.94
264
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%