Punjab Cricket Association Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Punjab Cricket Association Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Jun 2023
Closing Date28 Jul 2023
Tender Amount₹ 96,42,646
Costs
EMD
₹ 1,00,000Document Cost
₹ 5,900Tender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PCA_104596_1Bid Award Id
ViewTender No
PCA-MHLI/001/2023Tender Authority
Punjab Cricket Association ViewPurchaser Address
-Website
http://eproc.punjab.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black(Basic rate 1900/Sqm)
183.88
-
-
Chowkats of Imp. Teak Wood confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm)
-
-
-
Double Rebate (60mm x 150mm) (60mmx 150mm)
9.02
-
-
Extra over Item no 2.07.2 for using (250x60mm)
9.02
-
-
Teak wood doors shutter and windows panelled glazed or panelled , screws etc. complete fixed in position (excluding cost of hardware tower bolts and handles but including labour for fittings the same) (Excluding Glass and Hardware)
-
-
-
25 mm thick (Rectangular Opening Maximum Ht to be measure for Arch Section)
7.46
-
-
Extra over for 50mm Item No 2.08.1 for 50mm Thickness ( (Rectangular Opening Maximum Ht to be measure for Arch Section))
7.46
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
-
-
-
shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : necessary scaffolding upto 5 Mtr
-
-
-
12.5 mm thick tapered edge gypsum moisture resistant board.
109.7
-
-
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
1060.53
-
-
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
1060.53
-
-
Melamine polish two or more coats to give required finish including one coat of wood filler
14.91
-
-
Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (\MS Barricade)
17.43
-
-
Providing and Fixing 12mm thick toughened glass/ in partitions and parapets with cleats anchored to floor and Roof. All complete as per drawing
15.71
-
-
Providing Making and Installation and Testing of MS Signage, fabricate from 16 SWG face of letter Sheet, and 20SWG Sheet sides, with CNC Cutting/Powder Coating/Duco Paint making provision of electrical LED, and installation with 16 SWG Angle cleats fastened to wall and letters making spacing of 19mm from face of wall.
765
-
-
Providing and Fixing 4mm ACP Panel (Barricate Enterance). All complete as per drawing.
63.88
-
-
Making existing Logo Improvement on Wall and Door Handle including cleaning with suitable metal cleaners, and improving to give a new look.
2
-
-
Reception: Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineerin- charge (The rate is inclusive of all materials & labours involved except scaffolding).
41.17
-
-
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm
41.17
-
-
Extra over item no 3.07 for using size 2400x1200 and using best suitable adhesive for the purpose, approved by Engineer In Charge (Basic Rate of Tile 2100/Sqm)
41.17
-
-
Extra For Herringbone Pattern
7.4
-
-
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
41.17
-
-
Skirting
18.92
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
-
-
-
shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (Including layout/ cutting for lights, specialisd services.)
-
-
-
12.5 mm thick tapered edge gypsum board.
30.94
-
-
Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 750mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 750mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 375mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire/ Gypsum Screws of 19mm at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting.(Only Frame Work for POP and Wooden Ceilling), But excludes Gypsum or Ply/Board
18.87
-
-
9mm thick commercial ply wood
18.87
-
-
4mm thick 3 ply decorative ply wood with teak faced on one side
18.87
-
-
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ role form G.I. sheet with zinc coating of grade 175 consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm and 0.5mm thick fixed to the floor and ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5mm dia- meter,40mm length and the studs 48mm wide having one flange of 34mm and other flange 36mm and 0.50mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6mm dia bolts and nuts at both ends of partition fixed flush to wall with rawl plugs at spacing 450mm centre to centre and fixing of boards to either side of frame work by 25mm drive all screws on studs, floor and ceiling channels at the spacing of 300mm centre to centre, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, joint finisher and two coats of primer suitable for board as per manufacture’s specificatior and direction of engineer-in-charge all complete.
-
-
-
on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.
51.7
-
-
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per liter respectively conforming to IS: 2547 (Part- 1 & II) 1976, applied on hacked / uneven background such as bare brick/block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
103.39
-
-
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
103.39
-
-
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
103.39
-
-
Melamine polish two or more coats to give required finish including one coat of wood filler
26.42
-
-
Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (PhotoFrame Entreance)
1.92
-
-
9mm thick commercial ply wood For Photo Frame Enterance
51.7
-
-
Providing and Fixing Printed vinyl pasted to 4 mm SUNBOARD and fixing sunboard on existing PLY frames with suitable tapes and Adhesive. All complete as per drawing( Photo Frame Enterance)
51.7
-
-
Waiting Lobby: Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineerin- charge (The rate is inclusive of all materials & labours involved except scaffolding).
192.26
-
-
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm
192.26
-
-
Extra over item no 3.07 for using size 2400x1200 using best suitable adhesive for the purpose, approved by Engineer In Charge Basic Rate 2100/Sqm
192.26
-
-
Extra Over Herringbone pattern
11.15
-
-
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
192.26
-
-
Skirting
59.71
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
-
-
-
shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (Including layout/ cutting for lights, specialisd services.)
-
-
-
12.5 mm thick tapered edge gypsum board.
106.67
-
-
Wooden profile on wall out of 50x25mm Kailwood Frame in wall panelling at 600mm c/c with neceaary rawla plugs/ screws fixed to wall for straight line and plumb lines of wall panelling ( Entrance GFL, Player Corridor 1st Floor, Lift Wall, Wall Panelling Areas)
0.23
-
-
9mm thick commercial ply wood for wall panelling
29.74
-
-
4mm thick 3 ply decorative ply wood with teak faced on one side
29.74
-
-
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per liter respectively conforming to IS: 2547 (Part- 1 & II) 1976, applied on hacked / uneven background such as bare brick/block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
119.55
-
-
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
119.55
-
-
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
119.55
-
-
Melamine polish two or more coats to give required finish including one coat of wood filler
29.74
-
-
Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Reception Back Drop)
4.13
-
-
Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Frame For Model)
2
-
-
Providing and Fixing 12mm thick toughened glass/ in partitions and parapets with cleats anchored to floor and Roof. All complete as per drawing (Frame For Model)
9
-
-
Providing and Laying Wall paper on false ceiling/ walls (Including layout/ cutting for lights, specialisd services.) Basic Rate 1500 per Sqm
226.22
-
-
Providing and Fixing 4mm ACP Panel With CNC Cutt Pattern and fixing it with necessary tapes/ adhesives. All complete as per drawing(Reception Back Drop)
37.64
-
-
All signage Removal
2
-
-
POP Cornices 200*200 mm and fixing to wall with screws/nails/ wire of 20Swg at 600mm C/c GI wire. All complaete as per drawing,.
43.24
-
-
Staircase Lobby: Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black (Basic Rate 1900/Sqm)
15.61
-
-
Providing and laying Laminate wooden flooring (Grade AC5 or AC5+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer. (Basic Rate 1750/Sqm)
32.86
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
-
-
-
shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (Including layout/ cutting for lights, specialisd services.)
-
-
-
12.5 mm thick tapered edge gypsum
112.77
-
-
Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 750mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 750mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 375mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire/ Gypsum Screws of 19mm at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting.(Only Frame Work for POP and Wooden Ceilling), But excludes Gypsum or Ply/Board
42.21
-
-
12mm thick commercial ply wood (Beam Panneling)
42.21
-
-
Providing and Fixing 10mm Gypsum including jointing taping with nylon perforated tape. All complete as per drawing
42.21
-
-
Providing and Fixing 4mm Thick MDF pasted 1mm thick laminate on cold press and fixing to existing ply board with suitable adhesive (Beam Panneling)
42.21
-
-
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per liter respectively conforming to IS: 2547 (Part- 1 & II) 1976, applied on hacked / uneven background such as bare brick/block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
41.61
-
-
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
41.61
-
-
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
41.61
-
-
Melamine polish two or more coats to give required finish including one coat of wood filler
76.13
-
-
Teak wood 25 mm planking tongued and grooved flooring including fixing with screws complete. (Stair Riser)
6.02
-
-
Providing and Laying Wall paper on false ceiling/ walls (Including layout/ cutting for lights, specialisd services.) Basic Rate 1500 per Sqm
41.61
-
-
Removing of existing MS Railing and Handrail and Refixing in position with necessary Fasteners, cleaning and polishing the handrail.
23.49
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group C
60
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2000
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
30
-
-
Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
-
-
-
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.
-
-
-
Group B
24
-
-
Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
1 Pair
400
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
50
-
-
25 mm
200
-
-
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
-
-
-
5/6 amps switch
10
-
-
2 way 5/6 amps switch
2
-
-
15/16 amp switch
10
-
-
3 pin 5/6 amp socket outlet
2
-
-
6 pin 15/16 amp socket outlet
11
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 Module (75mmX75mm)
20
-
-
3 Module (100mmX75mm)
10
-
-
4 Module (125mmX75mm)
10
-
-
6 Module (200mmX75mm)
5
-
-
8 Module (125mmX125mm)
5
-
-
12 Module (200mmX150mm)
5
-
-
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module
10
-
-
3 Module
5
-
-
4 Module
2
-
-
6 Module
2
-
-
8 Module
2
-
-
12 Module
2
-
-
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc., including supplying and fixing ball and socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit up to 30 cm length, painting and wiring the down rods and connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
168
-
-
CABLE TRAYS PRE PAINTED WITH POWDER COATING with neccesary supports
-
-
-
MS perforated cable tray 150 X 50 X 1.6 mm
100
-
-
Electrical Wire
-
-
-
25 sqmm 4 Core Copper Conductor
50
-
-
16 sqmm 4 Core Copper Conductor
1
-
-
10 sqmm 4 Core Copper Conductor
25
-
-
6 Sqmm 4 Core Copper Conductor
25
-
-
Light Fixture Supply: Supply of architectural Inground LED fixture ranging in 12W Fixture consruction shall be of aluminium die cast Hosuing having High Purity Lens and clear tempered glass with deep inset LEDs for achieveing desired beam angle and Glare free light having minimum system lumen efficacy of 900 lumens with IP=66 with silicone gasket for use in Dry,Damp and wet locations. Fixture designed to directly install on the ground with help of mounting screws surface mounted type with ease of mounting. LED have useful life 50000 Hrs as per LM80.Fixture should withstand input voltage range form 100V-240V and operating temperature range form -20degC to 40degC . Make: Philips, Wipro, Trilux.
14
-
-
Supply of 24V 100W IP =65 rated LED Driver for Driving LEDs with input having inbuilt surge protection of 3KV minimum and Minimum conversion efficiency of 85%. Driver must be IS 15885 & BIS approved with R number and CE mark.
2
-
-
Supply of IP67 rated S Connectors Suitable for 2C for Connecting multiple Fixtures to enable looping of multiple fixtures to increase system efficiency.
2
-
-
Supply of IP67 rated T Connectors Suitable for 2C for Connecting multiple RGB Fixtures to enable looping of multiple fixtures with single DMX to increase system efficiency. Approved Make of Pharos, Wipro, Meanwell.
12
-
-
Supply of 35 W +/- 1W Round Hollow ring suspended fixture having Housing made up of extruded Aluminum powder coated White/Black Housing with 100lm/W ,THD10%,PF=0.95 CRI 80 and CCT of 4000K only with High efficiency, non-yellowing PMMA diffuser having dia of 600 mm with Surge prortection of2.5 KV. Make: Philips, Wipro, Trilux.
4
-
-
Supply of IP20 12W +/-1W COB LED Reccess Mounted Downlighter with titable head having minimum system lumen efficacy of 100 lm/W with Pressure Die cast aluminium hosuing and clear glass cover having P.F.0.95 with THD10% ,CCT 4000K ,CRI 80.The LED life of 50000 Hrs at L70.The Input voltage range shall be 150V to 270V with surge protection 2KV. Make: Philips, Wipro, Trilux.
40
-
-
Supply of IP20 15W +/-1W Low Glare COB LED Reccess Mounted Downlighter having minimum system lumen efficacy of 90 lm/W with minimum system lumen output of 1350 lumens with Pressure Die cast aluminium hosuing with White Finish Trim and High transmittivity diffuser with Chrome Finish reflector having P.F.0.95 with THD10% ,CCT 4000K ,CRI 80.The LED life of 50000 Hrs at L70.The Input voltage range shall be 100V to 265V with surge protection 2.5KV. Make: Philips, Wipro, Trilux.
28
-
-
Supply of 20 W + /- 1W Decorative Pendant Mounted LED Fixture made of fiber reinforced Plastic with Diifused Glass Dome with 600 mm dia having minimum system lumens of 1300 with minimum life of 50000 burning hours, CCT 4000K, CRI 80, with surge protection of 2 KV. Make: Philips, Wipro, Trilux.
2
-
-
Supply of IP20 LED Strip Light in 5mtr spool in 10W/ Mtr having 700 lm/mtr with polymide double sided PCB housing having surge protection of 3 KV including driver. Make: Philips, Wipro, Trilux.
20
-
-
Supply of IP20 15W +/-1W COB LED Track Light with system lumen efficacy of 100 lm/W with White housing with Pressure Die cast aluminium hosuing and clear glass cover having P.F.0.95 with THD10% ,CCT 3000K/4000K ,CRI 80.The LED life of 50000 Hrs at L70.The Input voltage range shall be 150V to 270V. Make: Philips, Wipro, Trilux.
21
-
-
Supply of suspension mounted cylindrical led downlighter 20W +/- 1W Fixture having inset clear glass diffuser with extruded aluminium black housing having system lumen efficacy of 80 lm/W with P.F.0.95 and THD10% with beam angle 36 degree .The LEDs with minimum life of 50000 Hrs. The LEDs used in the luminaire shall have CCT of ANSI Bin 4000 K and CRI of minimum 80. Make: Philips, Wipro, Trilux.
12
-
-
Supply of led fixture 15 W +/- 1 W LED Recess Mounted Downlighter with Deep inset diffuser for glare free lighting. Round Shape Fixture having Die Cast Heat housing and minimum system lumen efficacy of 120 lm/W with system lumen output of 1800 lumens with P.F.0.95 and THD10% ,CRI 80.The LED with Useful life of 50000 Hrs at L70 ,CCT of 5700 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V .Fixture have Surge Protection 2kV. Make Phlips, Wipro, Trilux.
2
-
-
Supply, installation, testing and commissioning of complete loud speaker ceiling mounted type , Complete as required (Similar to Bosch LBD 0606) with metal grill with necessary wiring and conduting complete connectivity with existing speakers.
4
-
-
Supply of LED Module IP65 Rating of 1.0 W / Module in 6000K for Signage Lighting. Make Osram/ Philips
900
-
-
Supply of LED Driver for LED Modules for Signage Lighting Make Osram/Philips
4
-
-
Providing LED Eye Ball Lights 6Watt IP 65 rating for display unis Make Philips, OSRAM
25
-
-
Misc for Electrical Works
-
-
-
Provinding and Fixing hook and chain for installation of Chandelier
9
-
-
Installation Testing and Commissioning of Speakers/ Light Fixture including hardware required for installation of fixture. All complete as per drawing
-
-
-
Downlighter/ Ball Light/Speakers
80
-
-
LED Light with fixture, luminaire and Drivers
350
-
-
LED Strip Light for Signages
900
-
-
HVAC
-
-
-
Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .
98
-
-
Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
-
-
-
2.0 TR Four Way Cassette AC
16
-
-
Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
-
-
-
Mid Static Ductable units (minimum 45 pascal external static pressure) 2.0 TR
2
-
-
High Static Ductable units (minimum 110 pascal external static pressure) 8 TR
2
-
-
Supply, installation, testing and commissioning of following minimum capacity Tower VRV/VRF Tower Type Indoor Floor mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, grill, necessary supports, vibration isolation, cord less remote control etc.,supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
-
-
-
04 TR Tower AC
6
-
-
Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :
-
-
-
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
35
-
-
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
30
-
-
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
25
-
-
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
30
-
-
19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
30
-
-
22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
35
-
-
25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
1
-
-
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
30
-
-
31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
1
-
-
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
20
-
-
38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
25
-
-
41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
20
-
-
Control Cabling: PVC insulated PVC sheathed twin flexible copper conductor cable Supply and erection of PVC insulated PVC Sheathed twin flexible wire with copper conductor complete in all respect as desire by the Engineer in Charge.
-
-
-
PVC insulated PVC sheathed twin flexible copper conductor of size 1.5 Sq. mm (48/0.20mm)
285
-
-
Providing and fixing PPRC/ UPVC 10kg/Cm2 pipes of various sizes with 6 mm Nitrile insulation for condensed water drainage from Indoor unit to nearest disposal point in toilet/ outside rain water harvesting system as approved by architect/consultant to the entire satisfaction of EIC.
-
-
-
25 MM
25
-
-
32 mm
20
-
-
Supply, installation, balancing and commissioning of Site
fabricated GSS sheet metal rectangular/round ducting complete
with neoprene rubber gaskets, elbows, splitter dampers, vanes,hangers, supports etc. as per approved drawings and
specifications of following sheet thickness complete as required.
-
-
-
Thickness 0.63 mm sheet 24 Guage
24
-
-
Thickness 0.80 mm sheet 22 Gauge
30
-
-
Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32kg/m³,with 25mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue
paper and 0.5 mm thick perforated aluminum sheet fixed to
inside surface of ducts with cadmium plated nuts, bolts, stick
pins, CPRX compound etc. complete as required and as per
specifications.
11
-
-
Supplying and fixing of following thickness duly laminated
aluminum foil of mat finish closed cell Nitrile rubber (Class “O”)
insulation on existing duct after applying suitable adhesive
for Nitrile rubber. The joints shall be sealed with 50 mm wide
and 3 mm thick self adhesive nitrile rubber tape insulation
complete as per specifications and as required. 19 mm
43
-
-
Supplying & fixing of powder coated extruded aluminium Supply
Air Grills with aluminium volume control dampers as per
specifications.
1.6
-
-
Supplying & fixing of powder coated extruded aluminium Return
Air Grills with louvers but without volume control dampers
complete as required.
1
-
-
Removing Existing AC Supply Linear Grills and Control Dampers
40
-
-
Removing and Reinstallation of AC Units
2
-
-
Core Cutting upto 150mm Dia and 230mm Deep
6
-
-
Fire System: Removing and Refixing testing and commisioning fire smoke/heat detectors, job includes making identification of detectors of existing location on drawing and submitting to client for approval, removing and storage of detectors in safe place, the cable shall be managed before false ceiling is completed and installation, testing and commission of detector with necessary hardware, support, after false ceiling is complete. All complete as per revised fitout drawing.
45
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements