Punjab Cricket Association Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Punjab Cricket Association Tender
Civil And Construction
Building Construction
Eprocure
Opening Date13 Dec 2023
Closing Date22 Dec 2023
Tender AmountRefer Documents
Costs
EMD
₹ 2,50,000Document Cost
₹ 5,900Tender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PCA_113877_2Bid Award Id
ViewTender No
09/2023Tender Authority
Punjab Cricket Association ViewPurchaser Address
-Website
http://eproc.punjab.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling reinforced concrete
0.62
-
-
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
72.82
-
-
Dismantling tile work/ Kota/Granite in floors/ cladding laid in cement mortar including stacking material within 50 metres lead.
345.54
-
-
Scraping White wash and colour wash
2428.45
-
-
Removal of Building rubbish with 5Km from premises.
168.76
-
-
Removal of upto 12mm thick toughened glass and stacking the servicqable material as directed by Engineer in Charge.
100
-
-
Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in Superstructure
3
-
-
Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
6
-
-
Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
24
-
-
Providing and laying autoclaved aerated cement blocks masonry with 100mm thick AAC blocks in super structure above plinth level in cement mortar 1:4 (1 cement : 4 fine sand ) The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work.
42.44
-
-
115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure
14.87
-
-
230mm First class burnt brick work laid in cement sand mortar 1:4 in superstructure
5
-
-
Waterproofing of wet areas ( Concrete/ Masonry Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitious coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface preparation and cleaning, washing and removing dust,dirt and loose particles from concrete / masonry surface complete in all respects.
95.55
-
-
12.5 mm thick cement plaster 1:4
319.14
-
-
16mm thick cement plaster 1:4 in two coat work
315.33
-
-
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 35mm thick
23.42
-
-
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 30mm thick
29
-
-
4mm thick 3 ply decorative plywood with teak faced on one side
58
-
-
Providing & Fixing decorative high pressure laminated sheet 1mm thick High Class Texture with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, ISI marked complete in all respect as per the directions of Engineer- in-charge.
46.84
-
-
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In_x005f_x0002_Charge. (Glazing and paneling to be paid for separately) : For fixed portion and chowkhats
300
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge
31.23
-
-
Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality)
56
-
-
Providing and Fixing Floor Spring of make including cutting of floor/PCC and Fixing machine, and making surface good
12
-
-
Providing and Fixing SS 304 Ball bearing hinges with necessary SS Screws
56
-
-
Providing and Fixing SS 304 Handles 200mm Long 22mm Dia or As Approved
56
-
-
Providing and Fixing 12mm thick toughened glass/ in partitions and parapets with cleats anchored to floor and Roof. All complete as per drawing
97.32
-
-
Providing and Fixing 8mm thick toughened glass, with sealant Measurement will be of visible glass in elevation.
5
-
-
Providing and Fixing 8mm thick toughened lacquered glass with cleats anchored to floor and Roof. All complete as per drawing. Job shall include necessary hardware to anchor the glass with floor and roof , suitable hinges for openable door of Dorma make, also gaskets to seal the cubicle and urinal partition. All Complete as per drawing
1
-
-
Fixing upto 12mm toughened glass with necessary screws fastener All Complete (labour only)
100
-
-
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperador etc.
20.07
-
-
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
20.07
-
-
Providing and laying Mat finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge :
150
-
-
Providing and laying vitrified floor / Wall tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption is less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
410.37
-
-
Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.
410.37
-
-
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.
410.37
-
-
Extra Cost for using darker fast shade Vitrified or Rectified Tiles instead of lighter shades.
410.37
-
-
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
410.37
-
-
Providing and fixing 1st quality ceramic glazed wall tiles/Tiles Matt/Semi Matt/Glossy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 600 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
330.74
-
-
Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring or laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per Sqm of tile area in average 3mm thickness over existing floor, including pointing the joints with white cement and matching pigments etc., complete
800
-
-
Providing and laying Laminate wooden flooring (Grade AC4 or AC4+ laminates) 8mm to 10mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer.
1040
-
-
Mirror polishing on marble work/Granite work/stone work where ever required to
give high gloss finish complete.
2000
-
-
Supplying and Laying Carpet tile size of 50cm × 50cm with .Made with 100% of Nylon with total thickness of 5 to 6mm approx. 15 Years Warranty. . Wt of Carpet Min 590gm/Sqm
418.22
-
-
Supplying & laying of approved make and brand of scratch proof, flexible 4 to 4.5 mm thick PVC floor with PU Coating, with suitable adhesive/ joints welded with same shade as that of floor, as per the design & instruction of the Engineer-in-charge.
146.93
-
-
Providing and laying 80mm thick factory made cement concrete interlocking paving blocks of M-40 grade manufactured by block making machine equipped with steel mould clampped to a strong vibratory vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63-2014 and of approved size and design/ shape laid as per satisfaction of EIC and design over including 40mm thick compacted bed of course sand, filling the joints with fine sand etc. all complete in all respect as per directions of EIC. Paver Block of COBLE shape 80mm thick
150
-
-
Providing anti-termite treatment for wooden members to IS-6313 (part III)
200
-
-
Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 750mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm dia x 40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 750mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 375mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm dia 230mm long G.I. wire/ Gypsum Screws of 19mm at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting.(Only Frame Work for POP and Wooden Ceiling), But excludes Gypsum or Ply/Board
199.1
-
-
Providing and fixing at all height false ceiling including providing and fixing of framework made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm dia x 40mm long with 6 mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm dia 230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 12.5 mm thick tapered edge gypsum Fire resistant board.
1510.19
-
-
Providing and fixing plywood, plain lining, butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra) 12 mm thick commercial plywood (WBP Ply/ MR Grade to be used)
199.1
-
-
Providing and fixing plywood, plain lining, butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra) 4 mm thick 3 ply decorative plywood with teak faced on one side
199.1
-
-
Providing and Fixing wooden plank ceiling made out of 18mm thick Rubber Wood Board anchored to ply with powder coated Channel of approved shade and detail with necessary screws and adhesive. All complete as per drawing
10.04
-
-
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm - 10mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.
2050
-
-
Wooden profile on wall out of 50x25mm Kail Wood Frame in wall panelling at 600mm c/c with necessary rawl plugs/ screws fixed to wall for straight line and plumb lines of wall panelling
1
-
-
Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
1
-
-
Providing and fixing teak wood beading to door windows chowkhats with iron screws fixed in position complete as per design and shape required 50mmx12mm
145
-
-
Providing and fixing teak wood beading to door windows chowkhats with iron screws fixed in position complete as per design and shape required 50mmx50mm
230
-
-
Providing and fixing teak wood beading to door windows chowkhats with iron screws fixed in position complete as per design and shape required 75x50mm beading
179.27
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2020
-
-
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
1414
-
-
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
1414
-
-
Providing and Laying Wall paper on approved shade and texture, and applying with primer and adhesive on wall. Base rate : Rs. 1300/- per sqm
606
-
-
Providing and fixing 1st quality 15mm thk. brick finish wall tiles (thickness to be specified by the manufacture) of approved make in red colour with top silicon coating as approved by Engineer- in- charge on the main fascade over 12mm thick bed of cement mortar 1:3 jointed with cement grey slurry @ 3.3 kg.per sqm. including scaffolding.
79.74
-
-
PU Polish two or more coats to give required finish including one coat of wood filler
745.45
-
-
PU Paint two or more coats to give required finish including one coat of wood filler
350
-
-
Providing and fixin HDHMR Board with necessary screws and hardware. All complete as per drawing 4 mm thick 3 ply decorative plywood with teak faced on one side with grrove and design as per drawing.
745.45
-
-
12mm thick BWP ply wood for wall panelling
745.45
-
-
18mm thick BWP ply wood for wall panelling
20
-
-
18mm tHick Rubber Board cut with CNC machines. All complete as per design Jaali
21.5
-
-
Providing and Fixing 25mm Thick Rubber Engraved with CNC machines. All complete as per design
50
-
-
Chowkats of commercial hard wood such as Cheetah Champ (Assam) confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position
4
-
-
Buffet counter in cladded with 18mmthick MR Grade ply finished with 8mm thick korean. Size 6000,750x850mm All complete as per drawing
2
-
-
Dismantling pipes laid in trenches to correct gradient and alignment and jointing of UPVC pipes cutting and jointing, including f specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 110mm o/d pipe
2
-
-
Dismantling pipes laid in trenches to correct gradient and alignment and jointing of UPVC pipes cutting and jointing, including f specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 160mm o/d pipe
2
-
-
Dismantling heavy flat iron clamps including cartage / disposal within 5 Km. 100mm i/d Clamps
10
-
-
Dismantling heavy flat iron clamps including cartage / disposal within 5 Km. 75mm i/d Clamps
15
-
-
Dismantling heavy flat iron clamps including cartage / disposal within 5 Km. 50mm i/d Clamps
29
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 16mm
400
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. SDR 11 CPVC pipes & fittings 20mm
300
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 25mm
250
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 32mm
150
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 40mm
80
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 50mm o/d
10
-
-
110mm o/d single socket SWR UPVC pipe lines laid complete Single Socket Type A
15
-
-
90mm o/d single socket SWR UPVC pipe lines laid complete Single Socket Type A
10
-
-
75mm o/d single socket SWR UPVC pipe lines laid complete Single Socket Type A
15
-
-
160mm o/d SWR UPVC pipe lines laid complete Single Socket Type B
300
-
-
110mm o/d SWR UPVC pipe lines laid complete Single Socket Type B
180
-
-
90mm o/d SWR UPVC pipe lines laid complete Single Socket Type B
180
-
-
75mm o/d SWR UPVC pipe lines laid complete Single Socket Type B
80
-
-
Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. Chinaware wall mounted E.W.C without cistern including seat cover complete in all respect.
12
-
-
Providing and fixing in position concealed cistern including flushing plate of approved make (to the approval of the Engineer-in- charge) complete in all respect.
12
-
-
Providing and fixing in position vitreous Chinaware white Senso urinal size 37 x 39 x 61 cm of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm complete in all respect. Modernlife Model No: K-21839T-ER-0 (Make-Grohe,Kholer,Duravit,Euronics)
2
-
-
Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with fittings for urinals complete
2
-
-
Providing and fixing Stainless steel health faucet complete in all respect.
12
-
-
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.Make-Grohe,Kholer,Duravit,Euronics) Size 630mm x 500mm (above counter oval)
13
-
-
Providing and fixing in position C.P. Brass Auto close Pillar Cock of approved make (to the approval of Engineer-in-charge)
13
-
-
Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-in- charge) complete in all respect.
13
-
-
Providing and fixing in position stainless steel sinks of approvedmake (to the approval of Engineer-in-charge) 1mm thick, grade-3.4 (18/8) with waste coupling complete in all respect. Sink with drain board overall size 1070 x 464 mm bowl size 430 x 355 x 200 mm and waste coupling.
1
-
-
Providing and fixing in position stainless steel sinks of approvedmake (to the approval of Engineer-in-charge) 1mm thick, grade-3.4 (18/8) with waste coupling complete in all respect. Double bowl sink without drain board overall size 1330 x 515 bowl size 560 x 410 x 200 mm.
1
-
-
Providing and fixing in position CP brass sink mixer swinging spout (table mounted) with 450mm long flexible hose of approved make Make ( to the approval of Engineer in charge) complete in all respect.
2
-
-
Providing and fixing in position paper holders of approved make (to the approval of Engineer- in-charge ) fixed in to wall with C.P brass screws complete in all respect. C.P. brass toilet paper holder
12
-
-
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P. brass towel Rails size 15mm dia 610mm long
2
-
-
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P.brass towel ring as approved
9
-
-
Providing & Fixing in position C.P./Aluminum Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. C.P. Brass khunti/Robe hook with 3 pegs
12
-
-
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
15
-
-
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in- charge )with various fixtures complete in all respect. 15mm C.P. Brass extension piece, 25mm long to 50mm long
25
-
-
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in- charge )with various fixtures complete in all respect. 15mm C.P. Brass extension piece 75mm long
45
-
-
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in- charge )with various fixtures complete in all respect. 15mm C.P. Brass extension piece 100 mm long
25
-
-
Providing & Fixing in position C.P. Brass Hex Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
45
-
-
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P.brass 15mm stop cock Male and female end
45
-
-
Providing & Fixing in position liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P. brass liquid soap container
11
-
-
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in- charge ) complete in all respect. C.P. brass 15mm Concealed stop cock with adjustable wall flange with seal.(Outer +Inner Body)
12
-
-
Providing & fixing in position C.P. copper tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P. copper tube connection of size 15 mm x 450 mm with C.P. Brass nut
22
-
-
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.
30
-
-
Providing and fixing in position SWR UPVC special for soil waste vent or anti siphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining For 110mm o/d pipes Single Tee
35
-
-
Providing and fixing in position SWR UPVC special for soil waste vent or anti siphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining For 110mm o/d pipes Elbow 90 Degree (All side socketed)
30
-
-
Providing and fixing in position SWR UPVC special for soil waste vent or anti siphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining For 110mm o/d pipes Coupler
18
-
-
Providing and fixing in position SWR UPVC special for soil waste vent or anti siphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining For 110mm o/d pipes P Trap/Floor Trap 110mm x 110mm
20
-
-
Providing and fixing in position SWR UPVC special for soil waste vent or anti siphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining For 110mm o/d pipes Single Y-Junction
21
-
-
Providing and fixing in position SWR UPVC special for soil waste vent or anti siphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining For 110mm o/d pipes Double Y-Junction
21
-
-
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. Size 75mm x 50mm
150
-
-
100mm internal diameter H.C.I.gully trap with H.C.I. grating & cast Iron cover weighing apprx.7.27 Kg & frame clear opening 300mmx300mm and outside size 330mmx330mm.
4
-
-
Cement concrete 1:2:4 shingle of 20mm size on and under SWR pipes.
10
-
-
Providing and fixing in position storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect 15 Ltr
4
-
-
Providing and fixing in position storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect 25 Ltr
3
-
-
Providing and Fixing of hanging system for all dia pipe with tie rod, fastener and hanging clamp 15 to 50mm
15
-
-
Providing and Fixing of hanging system for all dia pipe with tie rod, fastener and hanging clamp 75mm to 160mm
20
-
-
Providing and Fixing of hand dryer complete in all respect to the entire satisfaction of EIC
14
-
-
Providing and Fixing of Paper Dispenser complete in all respect to the entire satisfaction of EIC
14
-
-
Core Cutting upto 150mm Dia and 230mm Deep complete in all respect to the entire satisfaction of EIC
50
-
-
Providing & fixing of instant gyser 3 ltr capacity complete in all respect to the entire satisfaction of EIC
1
-
-
Supply & installation of commercial water purifier with 15ltr filtration per hour & storage tank of 15 ltr capacity of approved make to be approved by engineer incharge complete in all respects .
1
-
-
proving & fixing 1200mm highx450mm wide urinal modesty panels made of 12mm thick compact laminate as per 0026(Phenolic core board based on thermosetting resin,homogenously reinforced with cellulose fibre.top surface on both sides shall be melamine coated)( scratch & impact resistant,SS C bracket with bracing complete in all respects.( Marino Besco-URO/Stylam modesty panel .
200
-
-
Supply,Wiring,testing & commissioning of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit 1.6mm thick walls, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5sqmm PVC insulated copper conductor single core cable,6Amp,3way,pvc connector,GI flexible 25mm dia from true ceiling to light points etc. as required. Group C
80
-
-
Supply,Wiring,testing & commissioning of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit 1.6mm thick walls, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5sqmm PVC insulated copper conductor single core cable,6Amp,3way,pvc connector,GI flexible 25mm dia from true ceiling to light points etc. as required. but loop point
300
-
-
Supply,Wiring,testing & commissioning of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit 1.6mm thick walls, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5sqmm PVC insulated copper conductor single core cable,6Amp,3way,pvc connector,GI flexible 25mm dia from true ceiling to light points etc. as required. but twin controlled light point
10
-
-
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit (1.6mm Thick walls) as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
300
-
-
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit (1.6mm Thick walls) as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
500
-
-
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit (1.6mm Thick walls) as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
300
-
-
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit/pvc conduit/or including the cost of extension of existing conduit & 1.5sqmm copper wires upto final locations as per drawings including dismantling,pvc flexible 25mm dia,connection with 6Amp pvc connector etc as required complete in all respects.
450
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
100
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
150
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 75mm X 75mm X 60mm deep
15
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 100mm X 100mm X 60mm deep
20
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 150mm X 75mm X 60mm deep
15
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 150mm X 150mm X 60mm deep
15
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 180mm X 100mm X 60mm deep
20
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 200mm X 125mm X 60mm deep
20
-
-
Supplying , fixing,testing & commissioning of following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch
90
-
-
Supplying , fixing,testing & commissioning of following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 5/6 amps switch
10
-
-
Supplying , fixing,testing & commissioning of following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch
50
-
-
Supplying , fixing,testing & commissioning of following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet
20
-
-
Supplying , fixing,testing & commissioning of following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet
50
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)
15
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm)
20
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm)
15
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 Module (200mmX75mm)
10
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 8 Module (125mmX125mm)
5
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 12 Module (200mmX150mm)
5
-
-
Supplying , drawing,testing & commissioning of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit/cable tray/raceways as required.
2500
-
-
Supply,errection,testing & commissioning of data voice networking Plates RJ-45 incuding tghe cost of suitable size MS/pvc box either in surface or recessed compete in all respects as required.
50
-
-
Dismantling / Removing , storage of lights in safe place, the cable shall be managed before false ceiling is completed and installation, testing and commission of downlighter with necessary hardware, support, after false ceiling is complete up to any height. All complete as per revised fit out drawing, to the entire satisfaction of EIC
350
-
-
Receiving from store,shifting to locations,cutting in false ceiling,Refixing, testing and commissioning downlighter, the cable shall be managed before false ceiling is completed with necessary hardware, support,Pvc/GI flexible ,connection with 6Amp 3 way pvc connector after false ceiling is complete up to any height. to the entire satisfaction of EIC
350
-
-
Supply, installation, testing and commissioning of profile for LED strip lights of 17x6mm Aluminium Extruded Section.Fixing of light in existing recess made in ceiling with necessary hardware. All Complete as per drawing.
150
-
-
Supply, Installation, Testing and Commissioning of IP20 LED Strip Light in 5mtr spool in 5watt-8Watt/ Mtr having 700 lm/mtr with polyamide double sided PCB housing having surge protection of 3 KV including driver.
820
-
-
Supply,installation,connecting,testing & commissioning of 24V 100W IP =65 rated LED Driver for Driving LEDs with input having inbuilt surge protection of 3KV minimum and Minimum conversion efficiency of 85%. Driver must be IS 15885 & BIS approved with R number and CE mark.
50
-
-
Supply,Errection,connecting,testing & commissioning of IP67 rated S Connectors Suitable for 2C for Connecting multiple Fixtures to enable looping of multiple fixtures to increase system efficiency.
80
-
-
SITC of IP20 10W +/-1W COB LED Track Light with system lumen efficacy of 100 lm/W with White housing with Pressure Die cast aluminium housing and clear glass cover having P.F.0.95 with THD10% ,CCT 3000K/4000K ,CRI 80.The LED life of 50000 Hrs at L70.The Input voltage range shall be 150V to 270V.
225
-
-
SITC of IP20 15W +/-1W COB LED Track Light 2 Mtrx5 track lightfixtures per track with system lumen efficacy of 100 lm/W with White housing with Pressure Die cast aluminium housing and clear glass cover having P.F.0.95 with THD10% ,CCT 3000K/4000K ,CRI 80.The LED life of 50000 Hrs at L70.The Input voltage range shall be 150V to 270V.
12
-
-
Supply,fixing,connecting,testing & commissioning of wall mounted led 10W +/- 1W Fixture IP-20 with extruded aluminium black housing having system lumen efficacy of 80 lm/W with P.F.0.95 and THD10% with beam angle 36 degree .The LEDs with minimum life of 50000 Hrs. The LEDs used in the luminaire shall have CCT of ANSI Bin 4000 K and CRI of minimum 80.
30
-
-
Supply, installation, testing and commissioning of complete loudspeaker ceiling mounted type , Complete as required (Similar to Bosch LBD 0606) with metal grill with necessary wiring and conduiting complete connectivity with existing speakers.
10
-
-
Providing , Fixing,connecting,testing & commissioning of Wall Light 7watt Fixtures or as approved/as per drawings
30
-
-
Providing,fixing,connecting,testing & commissioning of button spotter Lights 2 Watt IP20 rating for display units
86
-
-
SITC of IP-65 LED Strip Light in 5mtr spool in 5watt-8Watt/ Mtr having 700 lm/mtr with polyamide double sided PCB housing having surge protection of 3 KV including driver.
230
-
-
Supply,fixing,connecting,testing & commissioning of wall mounted led 10W +/- 1W Fixture IP-67 with extruded aluminium black housing having system lumen efficacy of 80 lm/W with P.F.0.95 and THD10% with beam angle 36 degree .The LEDs with minimum life of 50000 Hrs. The LEDs used in the luminaire shall have CCT of ANSI Bin 4000 K and CRI of minimum 80.
4
-
-
Supply, installation, testing and commissioning of Gl volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.
2
-
-
Supplying, fixing, Testing commissioning of supply air diffusers of powder coated aluminum with aluminum volume control dampers with anti smudge ring & removable core.
2
-
-
Supplying, fixing, Testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
3
-
-
Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m3, with 25 mm X 25 mm Gl section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.
5
-
-
Supplying and fixing duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class-"O") existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required, above. Valves should have pressure rating of 25 Bar minimum. 19mm
3
-
-
Supply,installation,testing, balancing & commissioning of site fabricated or factory fabricated GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets,elbows,splitter dampers,vanes,hangers,supports etc as per approved drawings and specifications of following sheet thickness complete as required to the entire satisfaction of EIC. Make of GSS Sheet-TATA,SAIL 0.63mm
120
-
-
Supply,installation,testing, balancing & commissioning of site fabricated or factory fabricated GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets,elbows,splitter dampers,vanes,hangers,supports etc as per approved drawings and specifications of following sheet thickness complete as required to the entire satisfaction of EIC. Make of GSS Sheet-TATA,SAIL 0.80mm
10
-
-
Supply & fixing of powder coated extruded aluminum supply air Grills with aluminum volume control dampers as per specifications & complete as required. Make-Caryaire/Ravistar/Airflow/Cool Wings
2
-
-
Supply & fixing of powder coated extruded aluminum Return air Grills with louvers but without aluminum volume control dampers as per specifications & complete as required.
1
-
-
Supplying, installation, testing and commissioning of refrigerant T/Y-Joint fittings and headers to all indoor units at all floors including alignment of joints complete as required as per entire satisfaction of EIC.
5
-
-
Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system to the entire satisfaction of EIC. 28.6 mm OD (insulation = 19 mm)
5
-
-
Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system to the entire satisfaction of EIC. 22.2 mm OD (insulation = 19 mm)
10
-
-
Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system to the entire satisfaction of EIC. 19.1 mm OD (insulation = 19 mm)
10
-
-
Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system to the entire satisfaction of EIC. 15.9 mm OD (insulation = 19 mm)
15
-
-
Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system to the entire satisfaction of EIC. 12.7 mm OD (insulation = 19 mm)
15
-
-
Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system to the entire satisfaction of EIC. 9.5 mm OD (insulation = 19 mm)
20
-
-
Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system to the entire satisfaction of EIC. 6.4 mm OD (insulation = 19 mm)
20
-
-
Providing,fixing,testing and commissioning of PPRC 10kg/sqcm pipes of various sizes with 6mm thick Nitrile insulation for condensed water drainage from iexisting indoor units to revised location,the rates are inclusive of jointing the pipes with existing pipes with solvent joints,GI ceiling suspenders etc.required to complete in all respects.Pipe Make-PMA/ABB/Adaptaflex & insulation-K-Flex/A-Flex/Armacell 40mm dia
15
-
-
Providing,fixing,testing and commissioning of PPRC 10kg/sqcm pipes of various sizes with 6mm thick Nitrile insulation for condensed water drainage from iexisting indoor units to revised location,the rates are inclusive of jointing the pipes with existing pipes with solvent joints,GI ceiling suspenders etc.required to complete in all respects.Pipe Make-PMA/ABB/Adaptaflex & insulation-K-Flex/A-Flex/Armacell 32 mm Dia
100
-
-
Providing and First Charging of R410a refrigerant as per entire satisfaction of EIC.
200
-
-
Supply,Laying,Testing & commissioning of control cabling with pvc insulated twin flexible copper conductor 1100V grade of size 2Cx1.5 sqmm ,complete with 25mm dia medium duty pvc conduit duly supported with pre-painted suspenders like GI threaded rods of 8mm dia,GI slotted channel 40mm in width & 2mm thick including the cost of fastners etc.as required in complete respects.Make-KEI/Havells/Polycab
200
-
-
Removing and Reinstallation of AC Control Dampers/ Diffuser Grills/
50
-
-
Removing and Reinstallation of Existing ducting complete in all respects (.63mm or .80mm)
45
-
-
Removing and Reinstallation of AC Units including necessary supports to hang the units (Topup of R410 a shall be paid extra)
15
-
-
Design,supply,Installation,Testing & commissioning of SISW Air foil type Fan with 5000 Cfm/suitable as per site requirement,Double skin type blower housed with motor kirloskar make or eqv.& blower fan,Fan speed 1450 RPM or as manufacturer recommendations /35mm static pressure complete with canvas connection,MS supporting structures duly painted including the cost of DOL starter with protections ie over load,short circuit & single phasing preotection fabricated out of 2mm/1.6mm thick crca sheets,earthing studs 2 nos.wall mounting arrangement outdoor type IP-65 with canopy etc as required upto entire satisfaction of EIC.Make-Edgetech/Airflow/Roots/Waves envicon
1
-
-
Design,supply,Installation,Testing & commissioning of SISW Air foil type Fan with 900 Cfm/suitable as per site requirement,Double skin type blower housed with motor kirloskar make or eqv.& blower fan,Fan speed 1450 RPM or as manufacturer recommendations /35mm static pressure complete with canvas connection,MS supporting structures duly painted ncluding the cost of DOL starter with protections ie over load,short circuit & single phasing preotection fabricated out of 2mm/1.6mm thick crca sheets,earthing studs 2 nos.wall mounting arrangement outdoor type IP-65 with canopy etc as required upto entire satisfaction of EIC.Make-Edgetech/Airflow/Roots/Waves envicon
1
-
-
Removing and Refixing testing and commissioning fire smoke/heat detectors, job includes making identification of detectors of existing location on drawing and submitting to client for approval, removing and storage of detectors in safe place, the cable shall be managed before false ceiling is completed and installation, testing and commission of detector with necessary hardware, support, after false ceiling is complete. All complete as per revised fit out drawing.
50
-
-
Removing and Refixing testing and commissioning sprinkler and rosette plate, job includes making identification fire sprinkler of existing location on drawing and submitting to client for approval, removing and storage of sprinklers and rosette plates in safe place, flexible pipe shall be fixed before false ceiling is completed and installation, testing and commission of sprinkler with teflon tape, with necessary hardware, support, after false ceiling is complete. All complete as per revised fit out drawing.
100
-
-
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & ERLS outer sheath complete as required.
150
-
-
Supply,laying,testing & commissioning of twin twisted shielded cable for public address system complete in all respects.
100
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 25mm dia
70
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 32mm dia
50
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 40mm dia
50
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 50mm dia
20
-
-
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler
10
-
-
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Upright Sprinkler
5
-
-
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Horizontal side wall sprinkler
10
-
-
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 700mm
20
-
-
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1000mm
15
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements