Public Works Department Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 55,85,000Document Cost
₹ 50,000Tender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CEPW_118775_1Bid Award Id
ViewTender No
Bid No 74 Dt. 14-02-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
First class burnt brick work laid in cement sand mortar 1:6 in foundation
and plinth.
914.7
4789954
5236.64
Centring and shuttering for Columns ( Square or Rectangular or plygonal
in plain) in superstructure
3979.74
1999898
502.52
Extra rate for First Floor
1013.89
10681
10.54
Extra rate for Second Floor
579.65
12213
21.07
Extra rate for third Floor
84.9
2683
31.61
Centring and shuttering for sides and soffits of beam, beams launchings
girders bressumers, lintels
5215.65
2087981
400.33
Extra rate for First Floor
1351.78
14241
10.54
Extra rate for Second Floor
992.51
20912
21.07
Extra rate for Third Floor
27.7
875
31.61
Centring and shuttering for flat surfaces such as suspended floors, roofs,
landings, chajjas, shelves etc.
7605.03
4262315
560.46
Extra rate for First Floor
2086.9
21985
10.54
Extra rate for Second Floor
1393.54
29361
21.07
Extra rate for third Floor
89.39
2825
31.61
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and without vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
1886.32
12154446
6443.47
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.
2867.84
20744778
7233.59
Extra rate for First Floor
661.24
126085
190.68
Extra rate for Second Floor
470.45
179415
381.37
Extra rate for Third Floor
11.34
6487
572.05
First class burnt brick work laid in cement sand mortar 1:6 in first storey
upto 4 metres above plinth level..
2282.18
12280319
5380.96
Extra rate for First Floor
568.28
87407
153.81
Extra rate for Second Floor
414.87
127622
307.62
Extra rate for Third Floor
48.06
22176
461.43
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement sand mortar in super structure.
605.72
446179
736.61
Extra rate for First Floor
213.99
3381
15.8
Extra rate for Second Floor
150.56
4758
31.61
12.5 mm thick cement plaster 1:4.
11518.63
2381591
206.76
Extra rate for First Floor
3466.27
7313
2.11
Extra rate for Second Floor
2641.28
8346
3.16
Extra rate for Third Floor
105.15
442
4.21
20 mm thick cement plaster 1:4.
11518.63
3287301
285.39
Extra rate for First Floor
3466.27
7313
2.11
Extra rate for Second Floor
2641.28
8346
3.16
Extra rate for Third Floor
105.15
442
4.21
Plastering on under side of ceiling 10mm thick cement plaster 1:4.
6311.25
1199768
190.1
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS Clamp U-PVC pipes (working pressure 4kgf. / sqcm) pipe 110 mm dia.
347.56
92270
265.48
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
100
14222
142.22
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
190
16813
88.49
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
50
5563
111.27
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including
12.5m.m. thick cement plaster 1:3.
50
36901
738.03
Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire atisfaction of Engineer- in- charge.
100
11588
115.89
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
3880.74
2890685
744.88
Extra rate for Second Floor
723.61
4573
6.32
Extra rate for Third Floor
1031.32
9776
9.48
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
910.21
67674
74.35
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres
2278.2
151204
66.37
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
5983.69
2061321
344.49
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
3828.83
2123430
554.59
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge to be laid below the topping using mechanical mixer for
mixing of material
3161.72
706201
223.36
Extra rate for First Floor
1903.16
6013
3.16
Extra rate for Second Floor
1343.12
8488
6.32
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.
89.22
60625
679.51
FLOORING:
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600 x 600 mm
5539.99
8357074
1508.5
Extra rate for First Floor
1739.59
5497
3.16
Extra rate for Second Floor
1094.99
6920
6.32
FLOORING:
Providing and Laying out door precast Designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3(1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge.
466.17
508740
1091.32
Extra rate for First Floor
163.57
516
3.16
Extra rate for Second Floor
163.57
1033
6.32
Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance
unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability)
345.07
661951
1918.31
Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size Size 1000x1000 mm.
5831.56
411591
70.58
SKIRTING:
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of
approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
291.05
439048
1508.5
Extra rate for First Floor
81.08
256
3.16
Extra rate for Second Floor
40.54
256
6.32
FLOORING and TREADS OF STEPS:
Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Udaipur Green Marble Tiles of various sizes 18mm to 20 mm thick. Slabs sizes above 0.50 sqm
386.99
485155
1253.67
Extra rate for First Floor
120.45
380
3.16
Extra rate for Second Floor
90.33
570
6.32
SKIRTING and RISERS OF STEPS:
Marble work of thickness 18-20 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement
: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). :
Udaipur Green Marble Tiles of various sizes 15mm to 20 mm thick. Slabs sizes above 0.50 sqm
258.24
413253
1600.27
Extra rate for First Floor
91.44
288
3.16
Extra rate for Second Floor
61.32
387
6.32
NOSING:
Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.)
301.83
56599
187.52
FLOORING:
Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness andcolouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects.
60.22
9086
150.89
DADO IN LIFT:
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
75.28
260546
3461.03
Providing & fixing 16 guage stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainles steel pipe, Balusters of 40mm dia stainless steel pipe complete in all respects.
1380
699287
506.73
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending.) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be
suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6
1233.57
1603665
1300.02
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
5103.62
40200806
7876.92
Extra rate for First Floor
957.57
13118
13.7
Extra rate for Second Floor
583.18
15973
27.39
Extra rate for using steel produced in intergrated plant from original ores complete in all respect as per directions of engineer incharge
5103.62
2007100
393.27
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
29348.5
2473491
84.28
Applying priming coat with cement primer in all shade on newly plastered
or concrete exterior surface
29348.5
649188
22.12
Wall painting with plastic emulsion paint of approved brand and
manufacturer to give an even shade (two or more coats)
23859.42
2237059
93.76
Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
5765.1
941383
163.29
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
148.1
1578941
10661.32
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete
200
207960
1039.8
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
84.96
16290
191.74
Cement Concrete 1:8:16 with 40mm guage stone aggregate using
concrete mixing volumetric type
33.98
139871
4116.3
First class burnt brick work laid in cement sand mortar 1:5 in foundation
and plinth.
61.17
325415
5319.86
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
267.66
148441
554.59
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using
mechanical mixer for mixing of material).
401.49
141228
351.76
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-
Charge.
267.66
53087
198.34
Supply & Fixing of door frames (Chowkhats) consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (base steel as per IS:513) with zinc of 120gm/sqm & Powder coated with pure Polyster powder upto 50 micrones (as per approved colour) , 3 Nos 100mm but hinges 2mm thick, 6 Nos 1.2mm thick CRCA electroplated stiffner, 6 Nos M.S hold fast with split and tail welded to stiffner plate 200mm long, Receiver for aldrop, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.60mm of approved shade, fixed in position, including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in-Charge.
1819.74
2170149
1192.56
Supply & Fixing of Window frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS : 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12-
16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position by means of PVC & metal hold fastner with PVC cap complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in-Charge.
3750
4116562
1097.75
Supply & Fixing of Window Shutter consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS : 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position by means of screws complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in-Charge.
899.16
5035664
5600.41
Wire mesh window shutter section 40 mm x 20 mm with SS wire mesh 32 gauge flymesh with 144 holes per square inch
449.58
2559036
5692.06
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973
(a)Commercial with elm or gurjan
facing on both \ Sides with laminated core and lipped edges:-(iv)35mm thick
540.9
1314614
2430.42
Providing and fixing glazing in door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of Gasket /beading shall be paid as per respective item)
1014.58
828366
816.46
Providing and fixing beading 12 mm x 12 mm for fixed glass with ECO fixed gasket
1739.02
439693
252.84
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
1217.03
55131
45.3
Applying pink primer or aluminum priming coat on wood work including
preparation of surface knotting and stopping etc.
1217.03
35902
29.5
Applying priming coat with metal primer on new steel or iron work
including preparation of surface.
2504.11
63303
25.28
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface
to give an even shade.
2231.61
155163
69.53
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm
443
92874
209.65
Cup Boards as per details below
-
-
-
First class burnt brick work laid in cement sand mortar 1:5 in Super Structure
71.4
385386
5397.57
Cement Concrete 1:2:4 with Bajri mixing by mechanical means using concrete mixer volumetric type
10.5
60033
5717.45
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in Super Structure
23.52
164028
6973.98
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
1806
1529176
846.72
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (Code : IS 2202-1(1999) ) a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- ii) 25mm thick
504
1035911
2055.38
Providing & Fixing decorative high pressure laminated sheet 1mm thick High Class Texture with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, ISI marked complete in all respect as per the directions of Engineer- in-charge.
504
728481
1445.4
Providing & Fixing decorative laminated sheet 0.72mm thick and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
504
439639
872.3
Providing & fixing 12" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
1008
296281
293.93
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete in all respect as per the directions of Engineer-in-charge.
75 mm
504
122653
243.36
Providing and fixing Stainless Steel pipe and fitting of grade A ISI-304 as per IS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in- charge. (The pipe length inserted in the fitting shall not be measured for payment)
15.88 mm outer dia pipe
134.4
32566
242.31
Providing and Fixing of Copper Sheet 16 Gauge 350mm wide on expansion joint including covering with C. Concrete complete in all respect as per specifications.
63
290039
4603.8
Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allow movement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
151
86060
569.94
Preformed fillers for expansion joints in concrete pavement and structures (non-extruding and resilient type) part-3 Polymer Based (CED 13: building construction practices including painting, varnishing and allied finishing) complete as per IS 1838-3 (2011):
18.29
19326
1056.66
Providing and fixing chicken mesh for brick work and RCC junction of galvanized low carbon wire, annealed wire of diametre 0.6 to 2.0mm distance between the faces of the hexagon 13 to 50mm complete in all respect.
100
19700
197
FLOORING:
Kotah stone tile flooring 40mm to 50mm thick over 12.5 mm thick base of cement mortar 1:3 (1 cement; 3 sand) laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing.
579.07
727340
1256.05
SKIRTING:
Kotah stone tile 20mm thick in skirting, riser of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 Cement and 3 Sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing.
44.95
63562
1414.08
Black granite stone tiles 20mm thick in skirting, risers of steps dado, walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement, 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowels pins and cramps.
53.53
178332
3331.45
Non Schedule Items
-
-
-
Providing and fixing Decibel Ceiling Wood fiber 20mm tiles made of Wood Fibre cement composites with an option of colours as per the choice of the Architect/ person in charge. Has excellent noise absorption of 0.9 NRC, Density 400 Kg/m3 , meets stringent Fire Ratings ASTMD-876 and Fire Class -1 and Class P-not easily ignitable as per BS-476 weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60° Celsius (140° Fahrenheit). To be installed on G.I studs 600x600mm centre to centre spacing with web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, with a backing of acoustics 50mm thick and 32Kg/m3 density Rockwool for excellent results. The grid to be installed on 24mm Silent Board
1916.36
881908
460.2
Providing and fixing vertical linear baffle ceiling made from Aluminium Extrusion in Aluminium alloy grade 6063.The baffle units shall be in size of 25mm (W) x 75mm (H) and 1mm thick, non perforated. The baffle ceiling shall be installed at extruded aluminium box section with 125mm c/c spacing and making clear space of 100mm between two aluminium box sections.
1845
761985
413
Supply and Fixing of Wooden Acoustic Door, Single/Double Leaf Thickness 86mm , Acoustic door having Sandwich Composite system Rockwool 80kg/m3 density Confirming to IS 8183, Sandwiched between Sound Dampening Barrier Sheet and 12mm thick commercial ply with 1mm thick Mica laminates facing on both sides in desired shade and color. Red Meranti Hard Wood Door frame size is 150x110mm shall have single rebates on vertical and top edges with provision for EPDM door seal fixing. The shutter shall have provision for fixing automatic mechanical drop seal at bottom edges. Door Hardware like SS Hinges. Heavy duty Door Closer. Lever Handle Lock, Along with Automatic Drop-Down Seal, Tower Bolt, Door Stopper. Provision can be done as per architect's selection. All complete as per Client’s approval. Door Size and number of leaf's as per the site requirement, approximate door Size 1500x2400mm. All complete including the cost of all materials, Labors, hardware if any required all as per the specifications and as directed by the EIC. The work shall be executed by the authorized agency/applicator of the manufacturer. The Acoustic door shall be of Decibel Ceiling.
2
295000
147500
Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lift and combined up to 30 mtr.
1929.84
69126
35.82
Cement Concrete 1:5:10 with 40mm gauge stone ballast using mechanical mixture.
101.43
447264
4409.59
Centring and shuttering for Columns ( Square or Rectangular or plygonal in plain) in superstructure
685.87
344663
502.52
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
1421.32
314452
221.24
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
531.66
2828356
5319.86
First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In- Charge.
316.12
1727671
5465.24
Centring and shuttering for sides and soffits of beams haunching, girders, lintels.
273.33
109422
400.33
Reinforced cement cocrete M-20 by using needle type batch mix plantbut excluding steel reinforcement centring and shuttering in Foundation & Plinth
207.96
1284115
6174.82
Reinforced cement cocrete M-20 by using needle type batch mix plantbut excluding steel reinforcement centring and shuttering in superstructure.
93.94
654187
6963.89
12.5mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In- Charge.
1503.3
298164
198.34
20mm thick cement plaster 1:4 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In- Charge.
1503.3
429026
285.39
Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
3963.24
647157
163.29
Cold twisted deformed (ribbed/ tor steel) Bars, for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.
307.27
2420341
7876.92
Extra rate for using steel produced in intergrated plant from original ores complete in all respect as per directions of engineer incharge
307.27
120840
393.27
Construction of embankment with good quality earth obtained from borrow pits including compensation of eath, loading, unloading, carriage to site of required slope and compacing to meet requirement of table 300-2 as per technical clause 305 of MORT&H specification
48355.73
15690467
324.48
Precast Cement Concrete Kerb (a) Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per
1745.12
657369
376.69
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
645.7
44895
69.53
Providing, Laying & Compacting of Grading - I ( 63 - 45 mm gauge stone metal ) to W.B.M. Specifications with Screening (CSR 24.11 i)
436.25
958079
2196.17
Providing, Laying & Compacting of Grading - II ( 53 - 22.4 mm gauge stone metal ) to W.B.M. Specifications with Screening (CSR 24.12 i)
436.25
958061
2196.13
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.
5726.39
3891139
679.51
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and includi
776.49
519448
668.97
Steel work in built up tubular (round, square or rectangular hollow tubes etc. ISI Marked) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete having span:-Up to 15.00 Mtr. Span
250.65
2726944
10879.49
Iron grated doors, including pintle hinges and arrangements.
48
454100
9460.43
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
40
426452
10661.32
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
241.64
6108
25.28
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work or metallic or plastered or concrete surface to give an even shade.
241.64
16801
69.53
Providing and fixing of Chain Link Fencing detail as below
-
-
-
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
26.15
936
35.82
Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type
8.72
35894
4116.3
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
38.65
202395
5236.63
12.5 mm thick cement plaster 1:4
158.14
32697
206.76
20mm thick cement plaster 1:4 in two coat work
107.15
30579
285.39
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
265.29
33537
126.42
Steel work fixed independently without connecting plates including cutting hoisting and fixing in position Tees angles & channels
95.05
691924
7279.58
Providing & Fixing G.I Chain Link Facing Complete in all respect
763.97
484356
634
Iron grated doors, including pintle hinges & arrangements.
11.51
108889
9460.43
Applying priming coat with metal primer on new steel or iron work including preparation of surface. + Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
806.74
76495
94.82
TRACK:- Precast Cement Concrete Kerb (a) Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per
857.37
322962
376.69
Surkhi prepared from well burnt bricks, ground and screened at source. 700+10%+1%+12%
941.38
863829
917.62
Surkhi received from Kiln to Site lead upto 10 km
941.38
260442
276.66
Loading Surkhi at source.
941.38
19317
20.52
Coarse Sand from Lohand Khad
941.38
448087
475.99
Coarse Sand from Lohand Khad lead upto 216km
941.38
888013
943.31
Loading Course Sand at source.
941.38
19317
20.52
Black Soil Filling lead upto 5km
941.38
193557
205.61
Extra For compensation & royalty for Ordinary earth/ Ordinary clay taken from private land.
941.38
59721
63.44
Loading Back Soil at source.
941.38
19317
20.52
Extra for using concrete mixer volumetric type where not included in the rates .
2824.14
404642
143.28
Extra for laying earth/fly ash as per specifications in 20 cm. Layers and dressing but excluding cost of rolling.+Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.+Extra for rolling to specifications.
2824.14
279674
99.03
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
3101.97
1068597
344.49
GYM:- Supply of Shoulder Wheel complete in all respects having following specifications. Size: 1370 MM x 1160 MM x 1610 MM.
Made of 4mm thick GI Pipe. Main Post made of 114 MM Pipe support diameter 80 / 60 / 40 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultraviolet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
1
29500
29500
Supply of LEG PRESS complete in all respects having following specifications.
Size: 2070 MM x 740 MM x 1670 MM
Made of 4mm thick GI Pipe. Main Post made of 162 MM Pipe support diameter 80 / 60 / 40 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultraviolet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
1
35400
35400
Supply of AIR WALKER complete in all respects having following specifications.
Size: 1330 MM x 600 MM x 1400 MM
Made of 4mm thick GI Pipe. Main Post made of 114 MM Pipe support diameter 80 / 60 / 40 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultraviolet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
2
47200
23600
Supply of CHEST PRESS CHAIR complete in all respects having following specifications.
Size: 2220 MM x 810 MM x 2070 MM
Made of 4mm thick GI Pipe. Main Post made of 162 MM Pipe support diameter 80 / 60 / 40 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultraviolet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
1
41300
41300
Supply of AIR SWING complete in all respect having following specifications.
Size: 1425 MM x 915 MM x 1360 MM
Made of 4mm thick GI Pipe. Main Post made of 162 MM Pipe support diameter 80 / 60 / 40 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultraviolet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
1
29500
29500
Supply of HORSE RIDER complete in all respects having following specifications.
Size: 1180 MM x 590 MM x 1105 MM
Made of 4mm thick GI Pipe. Main Post made of 114 MM Pipe support diameter 80 / 60 / 40 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultraviolet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
1
29500
29500
Supply of ROWING STATION complete in all respects having following specifications.
Size: 1310 MM x 970 MM x 1140 MM
Made of 4mm thick GI Pipe. Main Post made of 114 MM Pipe support diameter 80 / 60 / 40 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultraviolet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
1
29500
29500
Supply of WAIST TWISTER TRIPPLE having following specifications.
Size: 1450 MM x1450 MM x 1425 MM
Made of 4mm thick GI Pipe. Main Post made of 162 MM Pipe support diameter 80 / 60 / 40 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultraviolet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
1
29500
29500
Supply of Cycle make having following specifications.
Size: 1160 MM x 530 MM x 1450 MM
Made of 4mm thick GI Pipe. Main Post made of 114 MM Pipe support diameter 80 / 60 / 40 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultraviolet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
1
29500
29500
Supply of Stepper having following specifications.
Size: 960 MM x 500 MM x 1440 MM
Made of 4mm thick GI Pipe. Main Post made of 162 MM Pipe support diameter 80 / 60 / 40 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultraviolet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
1
29500
29500
Supply of Arm and Leg Strengthener having following specifications Size:1150 MM x 750 MM x 1480 MM made of 4 MM GI Pipe of different NB. Main Post made of 164 MM Pipe. Main support diameter 90 / 60 / 32 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultra violet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively. This equipment emphasizes on the Legs and Arms muscle exercises. Assists in strengthening the joints and cardiovascular system
1
29500
29500
Supply of Cross trainer make having following specifications.
Size:1265 MM x 550 MM x 1780 MM made of 4 MM GI Pipe of different NB. Main Post made of 164 MM Pipe. Main support diameter 60 / 48 / 32 MM. The base plate made of 330 MM diameter. Seating & Foot Hold is Plastic Alloy, UV protectable 3 years and Lead free. Base Cover is Virgin LLDPE, 8 MM thick, UV protectable 3 years and Lead free. Powder Coated Pure Polyester Desired Color 110-150 microns, UV protectable for 3 years and Lead free. The Bearings are Maintenance free and Oil sealed. Equipment is manufactured and constructed only of materials that have a demonstrated durability. Metals subject to structural degradation such as rust or corrosion are painted, Galvanized or otherwise treated. Plastics and other materials that experience ultra violet (UV) degradation are UV protected. Moving suspended elements are connected to the fixed support with bearings or bearing surfaces that serve to reduce friction and wear. Fasteners are made of stainless steel & cannot be loosened without tools nuts and bolts have a means to prevent detachment. All the open ends of pipes and bolts with socket are covered by means of LLDPE caps and base cover respectively.
This equipment strengthens Lower Body, Increases endurance and helps to lose weight. It's very good in cardio exercises
2
59000
29500
Volley Ball:- Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
11.68
418
35.82
Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type
3.89
16012
4116.3
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
18.16
95097
5236.63
12.5 mm thick cement plaster 1:4
74.41
15385
206.76
20mm thick cement plaster 1:4 in two coat work
51.28
14634
285.39
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
125.69
15889
126.42
Steel work fixed independently without connecting plates including cutting hoisting and fixing in position Tees angles & channels
33.8
246049
7279.58
Providing & Fixing G.I Chain Link Facing Complete in all respect 50x50 meter 4 mm dia
338.16
214393
634
Iron grated doors, including pintle hinges & arrangements.
1.4
672
480.43
Applying priming coat with metal primer on new steel or iron work including preparation of surface. + Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
343.36
32557
94.82
Providing and Fixing 1 Set Volley Ball Pole & Polyster Net as per Standard size.
1
16800
16800
Marking of The Vollyball Ground with Paint Floor painting with two or more coats with epoxy paint
96.86
9999
103.24
Earth Filling Area
116.03
37649
324.48
Badminton Ground:- Earthwork in Excavation in foundation and trenches
5.56
1066
191.74
Cement Concrete 1:8:16 with Brick ballast
8.8
36223
4116.3
P/l Brickwork in Foundation and Plinth in 1:6 CSM
5.8
30372
5236.63
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
24.05
8284
344.49
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres
2.22
147
66.37
Cement Concrete 1:2:4 with Bajri mixing by mechanical means using concrete mixer volumetric type
6.23
35555
5707.19
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
82
10366
126.42
Supply of badminton Portable Pole set as per Standard Design
1
16800
16800
Marking of The Ground with Paint complete in all respects as per CSR 16.32+16.31
96.86
9999
103.24
Tennis Ground:- Earthwork in Excavation in foundation and trenches
9.81
1880
191.74
Cement Concrete 1:8:16 with Stone ballast
27.32
112457
4116.3
P/l Brickwork in Foundation and Plinth in 1:6 CSM
10.31
53989
5236.63
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
77.98
28744
368.61
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres
3.92
260
66.37
Cement Concrete 1:2:4 with Bajri mixing by mechanical means using concrete mixer volumetric type
19.87
113401
5707.19
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
261
32995
126.42
Supply of Lawn Tennis Poles (set) with Net as per Standard Design
1
13440
13440
Marking of The Tennis Ground with Paint complete in all respects as per CSR 16.32+16.31
96.86
9999
103.24
Handball:- Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
24.51
877
35.82
Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type
8.17
33630
4116.3
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
38.48
201505
5236.63
12.5 mm thick cement plaster 1:4
159.28
32932
206.76
20mm thick cement plaster 1:4 in two coat work
106.6
30422
285.39
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
265.88
33612
126.42
Steel work fixed independently without connecting plates including cutting hoisting and fixing in position Tees angles & channels
53.51
389530
7279.58
Providing & Fixing G.I Chain Link Facing Complete in all respect 50x50 mark 4 mm dia wire
715.33
453519
634
Iron grated doors, including pintle hinges & arrangements.
1.4
672
480.43
Applying priming coat with metal primer on new steel or iron work including preparation of surface. + Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
720.53
68320
94.82
Providing and Fixing 1Set Hand Ball Pole
1
39200
39200
Marking of The Handball Ground with Paint complete in all respects as per CSR 16.32+16.31
96.86
9999
103.24
Earth Filling Area
360.83
117082
324.48
Landscaping:- Grassing of grounds with doob grass including uprooting rank vegetation and weeds by digging the area to a depth of 15 cm, removing all weeds
and other growth with roots by forking repeatedly, breaking clods, mixing fertilizer,
rough dressing and then fine dressing for planting new grass, including disposal of all
rubbish with all leads and lifts, planting grass roots in rows 10 cm apart in both directions, watering, weeding and maintenance till turf is formed
6040.89
222727
36.87
Supplying and planting permanent trees in prepared pits and watering
100
17910
179.1
Supplying and planting permanent shrubs in prepared pits and watering
50
3476
69.53
Basket Ball:- Earthwork in Excavation in foundation and trenches
14.08
2699
191.74
Cement Concrete 1:8:16 with stone ballast
63.98
263360
4116.3
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth
24.64
129030
5236.63
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
172.54
59438
344.49
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres
5.63
373
66.37
Cement Concrete 1:2:4 with Bajri mixing by mechanical means using concrete mixer volumetric type
46.3
264242
5707.19
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
608
76863
126.42
Earthwork in Excavation in foundation and trenches
4.41
845
191.74
Cement Concrete 1:8:16 with Stone ballast 40mm gauge.
0.55
2263
4116.3
Cement Concrete 1:2:4 with Bajri mixing by mechanical means using concrete mixer volumetric type
3.86
22029
5707.19
Supply of basketball Poles (Set of 2 number) with acrylic Board as per Standard Design
1
252000
252000
Marking of The Basketball Ground with Paint complete in all respects as per CSR 16.32+16.31
96.86
9999
103.24
Steel work fixed independently without connecting plates including cutting hoisting and fixing in position Tees angles & channels
52.3
380722
7279.58
Providing & Fixing G.I Chain Link Facing Complete in all respect 50x50 mark 4 mm dia wire
510.02
323352
634
Iron grated doors, including pintle hinges & arrangements.
1.4
13244
9460.43
Applying priming coat with metal primer on new steel or iron work including preparation of surface. + Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
515.22
48853
94.82
Estate Water Supply :- Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
Earth work upto 1.5 m. Depth All classes of soil except rocky
376.78
39335
104.4
Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring. D.I. Pipe as per IS 8329 DI-K7
80 mm i/d pipe lines laid complete
189
230825
1221.3
100 mm i/d pipe lines laid complete
77
113162
1469.64
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
50mm i/d pipe lines laid complete
55.5
40065
721.9
65mm i/d pipe lines laid complete
351
353467
1007.03
Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.
-
-
-
D.I. specials upto 300mm i/d (1.6 kg per mt length)
425.6
51927
122.01
Constructing one No. of 60 KL (60000 litres) Capacity with working depth 2.50 m and size measureing 7 mt x 3.50 mt x 2.95 internal size including free board depth of 0.45 mt . Complete with ventilator single main hole cover lightening conductor etc. complete as described. Providing and fixing DI K-9 D/F expansion joints conforming to (IS-8329/2000) or latest bell mouth and D/F puddle collars as per DWSS design on basis of enclosed drawing. Duck foot bends, Conforming to ISI - 13382 and DI K-9 D/F sluice Valve duly ISI marked (IS-14846-2000 or latest) one each with inlet, outlet and scour pipes, including providing and installing inlet, outlet and overflow DI K-9 double flanged pressure pipes horizontally cast in sand moulds as per IS 7181/1986 and latest duly ISI marked from bottom dome to duck foot bend and further up to 2.75 mtr as per detail specification. TMT steel & painting of all complete shall be included in cost & P/F aluminium ladder inside the UGSR complete in all respect as per specifications. (The specifications & drawing are based on safe bearing capacity of soil of is less than 8.75 ton per sqm. In case the safe bearing capacity of soil is less than 8.75 tone per Sqm. The contractor shall submit his own design for foundation portion based on actual safe bearing capacity as per DWSS specifications. The difference in quantities from the standard drawing based on 8.75 tone per sqm safe bearing capacity will be paid as per CSR+ Prevailing Ceiling Preminum including providing and fixing automatic Electronic Water Level control Device and disposal of surplus earth within lead of 5 km, Complete in all respects. ( including carriage)-
1
804377
804377.88
Providing,Laying , fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Pipes for Filling OHT Line & External Garden Hydrant)
-
-
-
H.D.P.E pipe of 10 Kg. PE-100
-
-
-
40 mm o/d
50
4202
84.05
50 mm o/d
450
56781
126.18
63 mm o/d
50
9887
197.75
Providing ISI Marked G.M ferrule as per IS:2692, drilling and tapping cast iron pipe lines of all diametres and screwing in Ferrule and connections complete in all respect. (Making connection from HDPE Lines for Garden Hydrant)
-
-
-
25mm i/d Ferrule heavy duty
35
57478
1642.25
Making connection with the existing D I/G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. (Connection from DI/GI main to Hdpe for garden line)
2
790
395.39
Providing & fixing C.I indicating plates of size 100mm x 100mm for SV/FH including synthetic enammel paint & letters in white enamel paint , fixing in the ground with angle iron of size 25x25x5mm, 230mm height from ground including concrete block complete in all respect as directed by Engineer-in-Charge.
4
1008
252.2
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) Class PN-1 as per ISI
-
-
-
80 mm I/d
2
8861
4430.64
100 mm I/d
2
12033
6016.61
Providing connection, laying, jointing, fixing, testing MDPE pipe (as approved by Engineer in charge), including cost of excavation, refilling, the trench, CI bib cock as per IS : 210 with stainless steel spindle, 15 mm o/d MDPE pipe 2.50 meter (length on average basis) 15mm o/d GI pipe 2.00 mtr, 3” i/d uPVC clamp, GM ferrule ISI marked, connection of 15 mm i/d ferrule medium, specials such as tees, bends, sockets, elbows, nipples (100mm & 150 mm), union couplings, GI hooks etc. and gun metal peet valve (heavy pattern) with hand wheels on MDPE/GI pipe line laid in the ground, cutting, threading, making holes in wall and testing in trenches in the ground. All material should be approved make (to be approved of Engineer in charge). Complete job in all respect ( for external irrigation/ landscape purpose only)
10
16000
1600
Tubewell and Submersible Pumpsets
-
-
-
Drilling of 500mm dia bore with reverse rotary rig in all kinds of soil including the cost of consumable stores, fuel oil and transportation of rig to the site. Complete in all respects.
-
-
-
Drilling of 500mm dia bore with reverse rotary rig upto 150 mtr depth BGL.
150
189048
1260.32
Drilling of 500mm dia bore with reverse rotary rig beyond 150 mtr depth upto 200 mtr depth
50
82024
1640.48
1. Erection and dismantling of boring plant including all arrangement for the transportation of the boring equipment to site of work from the store of contractor at site and back are to be made by the contractor at his own cost. All rates should be quoted for supplying the material at site of work. Pits for collection of Water and Water for drilling tube-well be arranged by the firm/ contractor at site at his own cost.
-
-
-
2. In case the bore is converted into a tube-well payment of bore shall be made up to the bail plug plus margin (7% of main bore drilling or as actual as per field requirement whichever is less) required for sustaining the main bore. The test bore beyond margin shall be paid at the rate of test bore drilling.
-
-
-
Making electric Logging of borehole with electronic well logger including cost of equipment at site etc.complete in all respect.
1
16696
16696.47
Supplying, lowering of MS Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.
-
-
-
200mm nominal diameter (weight 33.6 kg per metre) 6.40 mm thickness
186
687310
3695.22
Supplying, fixing and lowering of stainless steel cage type wite wound screen as per , ISI 8110-2000 or latest ISI marked , duly welded with suitable-grade SS welding electrode to lower the strainer into tubewell bore .
-
-
-
200mm Steel Strainer (slot size 0.75mm) 6.30 mm thickness
10
95710
9571.05
Supplying and fixing of bail plug of M.S pipe complete with inverted U-hook attached to the bottom plug Complete in all respects.
-
-
-
200mm internal diameter (weight 33.6 kg per metre) 6.40 mm thickness
4
14749
3687.25
Supplying, fixing and lowering of stainless steel socket as per IS 8110-2000 or latest, ISI marked duly welded with suitable-grade SS welding electrode to lower the strainer into tubewell bore complete in all respect.
-
-
-
200 mm Internal Diameter
4
20555
5138.87
Supplying, lowering & fixing of M.S. special socket to connect S.S. Strainer to M.S pipe duly welded with suitable-grade welding electrode complete in all respects.
-
-
-
200 mm Internal Diameter
5
5137
1027.57
Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect.
-
-
-
200 mm Internal Diameter
1
777
777.73
Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable-to fit Housing pipe including the cost Nut & Bolts of suitable-size complete in all respect.
1
2816
2816.25
Supplying at site Wooden Box of suitable-size with Lid & locking arrangment for preserving strata sample collected from the bore.
1
608
608.53
Supplying at site of gravel of 1/16" to 1/8" sizes including pouring and packing in the annular space between the pipes assembly and the bore.The gravel should be free from, dust,dirt, or the vegetable-manner as per IS 4097/1967 with latest amendments .( to be paid as per actual length of pipe)
22.02
38578
1751.97
Supplying of tibba sand /local sand over gravel packing & clayseal, upto G.Level between pipe assembly and bore including carriage . Complete job in all respect (upto 60 mt depth approx.)
9.64
4338
450
Supplying and fixing sanitary seal having rubber tight on housing pipe . Complete job in all respect 200 mm dia
1
1000
1000
Supplying of clay to provide imprevious layer in between pipe assembly and bore above gravel packing including carriage of material. Complete in all respect.
0.48
2256
4700
Supplying and fixing Mild steel centering guide made out of 32mm x 6mm thick M.S. bar complete in all respects.
6
1838
306.35
Testing of water sample for Heavy metal from approved laboratory (Aluminium, selemium, cadmium, chromium, lead, mercury, arsenic, nickel, pesticide etc.)
1
5981
5981.44
Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.
-
-
-
Capacity of Air compressor 550 cfm at 600 PSI
10
61930
6193.05
Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.
8
15266
1908.34
Rising Main
-
-
-
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in
all respect.
-
-
-
All classes of soil except rocky
33
3445
104.4
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
-
-
-
80 mm i/d GI pipe heavy duty from tubewell to UGSR
50
57618
1152.36
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) Class PN-1 as per ISI
-
-
-
80 mm I/d
2
8861
4430.64
Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete @ 33Kg Each (2x33kg = 66kg)
66
4750
71.98
Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department (size 0.6m x 0.6m)
2
11179
5589.83
Pumping Machinery
-
-
-
Providing, installing, testing and commissioning of 1 no. Electrically driven pumping set of reputed make , capable of deleviring 230 lpm against a head of 65 mt (Minimum-7.50 BHP) . Complete in all respects ( from tubewell to ugsr)
1
45000
45000
Providing, installing, testing and commissioning of 1 no. Electrically driven pumping set of reputed make , capable of deleviring 230 pm against a head of 30 mt (Minimum-3.00 BHP) . Complete in all respects ( from UGSR to complex)
1
32000
32000
Supplying, lowering of 65 mm dia GI double flanged column pipe as per ISI marked (IS 1239) including cost of specials such as sockets, cutting and threading and welding etc Complete in all respects ( for tubewell)
56
47806
853.69
Supplying, lowering of 65 mm dia GI double flanged column pipe as per ISI marked (IS 1239) including cost of specials such as sockets, cutting and threading and welding etc Complete in all respects ( for ugsr pumping machinery)
6
5122
853.69
Providing and fixing of submerssible of 2.50 mm ² core cable , complete in all respect (Tubewell to pump room)
300
31500
105
Providing installing, testing and commissioning of 1 no. Control panel .Complete job including indicators, switches, over load functions , line fault protection , power saving functions as per manufacturer specifications, details & enclosure etc. Complete in all respect including carriage , GST as applicable& installation charges
2
30000
15000
Providing and installing 80 mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects
1
41650
41650
Prov. Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator ,suitable-for delivering 0.5 to 6 Litres of Bleaching Powder Solution/Sodium Hypo solution per hour under maximum delivery pressure up to 7 Kg.cm2, and suction lift not less than 1.5 m, as per DWSS. standard specifications.
1
15000
15000
Construction of brick masonry Pump house having space for measuring 3.05 mt x 3.70 mt ht covered with RCC roof slab , lintels , beams doors and windows flooring, plastering , white washing, enamel paint etc. internal / external finishings and cost of electric wiring and recessed fittings / accessories as per standard design complete in all respects.
1
396000
396000
Development of water works site
-
-
-
Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects ( 85) =85 -2.50x2 = (80 x 3) rows mt for t/well site
240
4560
19
Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing
38
20102
529
Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm
27
5319
197
Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard
4
26736
6684
Provision of masonry gate pillar & MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing .
1
28066
28066
Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard
25
58325
2333
Providing & fixing MS Sign Board as per standard size of DWSS as per analysis
1
5793
5793
Construction of toe wall around the water works site (0.45 mtr depth)
85
69530
818
Estate Sewerage Disposal System
-
-
-
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
-
-
-
160 mm o/d pipes
378.82
474809
1253.39
200 mm o/d pipes
160.5
315246
1964.15
Sand Filling
-
-
-
For covering Sewer Line Type II
69.4
34700
500
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
-
-
-
For depth not exceeding 3.0 m B.G.L. For all classes of soil except rocky
166.68
17384
104.3
Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
22.66
86393
3812.62
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth
19.54
105170
5382.33
Cement Concrete 1:2:4 with stone ballast or shingle.using concrete mixing volumetric type
0.67
3299
4925.11
Floating coat of 1:5mm thick neat cement laid in one operation to the topping
59.13
1806
30.55
12.5 mm thick cement plaster 1:3
205.34
46909
228.45
Cement rendering on plaster 1mm thick
205.34
28090
136.8
Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
19.88
108026
5433.95
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
15.9
125227
7875.97
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable-to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design
132
29063
220.18
Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).
RCC Man hole cover with Frame 560mm i/d RCC man hole cover with frame as per ISI
-
-
-
Heavy duty
33
67514
2045.9
Estate Sewerage & disposal system
-
-
-
Planning, Designing, Supplying, Errection, Testing & Commissioning of Mobile and Fully Containerized Sewerage Treatment Plant, Insulated with Polyurethane Foam with FRP lining of 0.10 MLD capacity (100 KLD) based on Suitable technology such as MBBR/MSR or equivalent subject to technical approval by the technical committee, DWSS as well as latest Guidelines/Norms of Punjab Pollution Control Board/ NGT including cost of all Civil structures, Mechanical units & Electrical units (Inlet & Outlet Sump). Cost includes all kind of consumable, chemicals and water analysis required for Errection, Testing & Commissioning of Sewage Treatment Plant. (As per present market rates) (Refer quotation & AOR)
1
9448788
9448788
Operation and mainternace cost for 5 years (60 months) @ 50000/- per month x 60 months The agency shall be responsible for Operation & Maintenance of STP for FIVE year from the date of successful commissioning of plant. The cost of operation & maintenance includes manpower, consumables & chemicals required for it.
6
300000
50000
Constructing one No. of 40 KLD (40000 litres) Capacity with working depth 2.50 m and size measureing 4.50mt (internal) diameter size and free board of 0.45 mt depth . Complete with ventilator single main hole cover lightening conductor etc. complete. Providing and fixing DI K-9 D/F expansion joints conforming to (IS-8329/2000) or latest bell mouth and D/F puddle collars as per DWSS design on basis of enclosed drawing. Duck foot bends, Conforming to ISI - 13382 and DI K-9 D/F sluice Valve duly ISI marked (IS-14846-2000 or latest) one each with inlet, outlet and scour pipes, including providing and installing inlet, outlet and overflow DI K-9 double flanged pressure pipes horizontally cast in sand moulds as per IS 7181/1986 and latest duly ISI marked from bottom dome to duck foot bend and further up to 2.75 mtr as per detail specification. TMT steel & painting of all complete shall be included in cost & P/F aluminium ladder inside the UGSR complete in all respect as per specifications. (The specifications & drawing are based on safe bearing capacity of soil of is less than 8.75 ton per sqm. In case the safe bearing capacity of soil is less than 8.75 tone per Sqm. The contractor shall submit his own design for foundation portion based on actual safe bearing capacity as per DWSS specifications. The difference in quantities from the standard drawing based on 8.75 tone per sqm safe bearing capacity will be paid as per CSR+ Prevailing Ceiling Preminum including providing and fixing automatic Electronic Water Level control Device and disposal of surplus earth within lead of 5 km, Complete in all respects. ( including carriage)
1
779463
779463.47
Providing and installing 65 mm dia delivery main (on inlet point) including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects
1
41650
41650
Pumping Machinery
-
-
-
Providing, installing, testing and commissioning of 1 no. Electrically driven pumping set of reputed make , capable of deleviring 146 lpm against a head of 15 mt (Minimum-1.00 BHP) . Complete in all respects ( from UGSR to TAIL END of distribution)
1
18000
18000
Providing and fixing of submerssible of 2.50 mm ² core cable , complete in all respect (UGSR to pump room)
50
5250
105
Providing installing, testing and commissioning of 1 no. Control panel .Complete job including indicators, switches, over load functions , line fault protection , power saving functions as per manufacturer specifications, details & enclosure etc. Complete in all respect including carriage , GST as applicable& installation charges
1
12000
12000
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
-
-
-
Earth work upto 1.5 m. Depth All classes of soil except rocky
251.46
26252
104.4
Providing,Laying , fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.
-
-
-
H.D.P.E pipe of 10 Kg. PE-100
-
-
-
63 mm o/d
508
100457
197.75
Providing ISI Marked G.M ferrule as per IS:2692, drilling and tapping cast iron pipe lines of all diametres and screwing in Ferrule and connections complete in all respect. (Making connection from HDPE Lines for Garden Hydrant)
-
-
-
25mm i/d Ferrule heavy duty
6
9853
1642.25
Providing & fixing C.I indicating plates of size 100mm x 100mm for SV/FH including synthetic enammel paint & letters in white enamel paint , fixing in the ground with angle iron of size 25x25x5mm, 230mm height from ground including concrete block complete in all respect as directed by Engineer-in-Charge.
-
-
-
Qty. same as above
6
1513
252.2
Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete
-
-
-
65mm i/d Gun Metal peet valve heavy pattern.
6
23959
3993.17
Rain water harvesting system ( buildings and racing track only)
-
-
-
Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.
215
70797
329.29
160mm o/d pipe of 4 Kgf. / sqcm
582.83
396371
680.08
200 mm o/d pipe of 4 Kgf. / sqcm
391.95
413205
1054.23
Excavation in trenches with straight or open cutting in a street, lanes or in a open area with 3D/JCB or excavator including manually dressing bed, trimming sides & slide slope for sewer & manhole to full depth as shown in drawing, including, dressing to correct sections and dewatering, provision for diversion for traffic,protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching etc. fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level removal of surplus spoils from the site of works upto chain (15 m), complete in all respects.
-
-
-
For depths not exceeding 3.0 metre B.G.L. For all classes of soil except rocky
615.03
64147
104.3
Providing and filling sand grading as per specifications or fine grade around the various sizes of pipes in external work.
24.99
17188
687.83
Construction of Haudi internal size 0.90mtr x 0.90mtr & 0.90mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC Road Gully grating & frame size (610mm*457mm) clear inside opening. complete as per Drawing attached & as desired by the Engineer-in-charge
-
-
-
Haudi Inside size 90x 90 cm and 90 cm @ 15 mt c/c deep as required
27
267030
9890
Construction of Haudi internal size 0.45mtr x 0.45mtr & 0.45mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x450 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge
-
-
-
No. of Haudi: size 0.45 x 0.45x 0.45 mt @ 10mtr c/c to carry roof top rainwater
59
210335
3565
Cutting holes upto 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes and making good the same & finishing according to existing finish where requied
86
27721
322.34
Construction of Rain water recharge well 3.00 mtr dia with working depth 4.50 mtr dia consisting of drilling bore 300mm dia 35mtr, supplying and lowering pvc perforated housing pipe 200 mm dia Upvc medium well casing 40mtr sorrunded , Upvc RMS Screen,200mm i/d 5 mtr duly plugged from top with bail plug, fixing MS clamp, MS socket, Well size 3.00 mtr internal dia, 4.50 mtr deep duly covered RCC slab. The Pit made out of first class brick masonry wall 230 mm thick in 1:5 cement sand mortar,plastered from inside, ,with 3 layers (500 mm each ) filtermedia, manhole covers, and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge . (Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates).
1
217148
217148.53
Construction of Rain water recharge well 3.50 mtr dia with working depth 4.50mtr dia consisting of drilling bore 200mm dia 35mtr, supplying and lowering pvc perforated housing pipe 200 mm dia Upvc medium well casing 40mtr sorrunded , Upvc RMS Screen,200mm i/d 5 mtr duly plugged from top with bail plug, fixing MS clamp, MS socket, Well size 3.00 mtr internal dia, 4.50 mtr deep duly covered RCC slab. The Pit made out of first class brick masonry wall 230 mm thick in 1:5 cement sand mortar,plastered from inside, ,with 3 layers (500 mm each ) filtermedia, manhole covers, and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge . (Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates).
2
486101
243050.53
Construction of Rain water recharge well 4.0 mtr dia with working depth 4.50 mtr dia consisting of drilling bore 200mm dia 35mtr, supplying and lowering pvc perforated housing pipe 200 mm dia Upvc medium well casing 40mtr sorrunded , Upvc RMS Screen,200mm i/d 5 mtr duly plugged from top with bail plug, fixing MS clamp, MS socket, Well size 4.00 mtr internal dia, 4.50 mtr deep duly covered RCC slab. The Pit made out of first class brick masonry wall 230 mm thick in 1:5 cement sand mortar,plastered from inside, ,with 3 layers (500 mm each ) filtermedia, manhole covers, and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge . (Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates).
3
792376
264125.53
Construction of Dislting chamber for Rain water recharge well measuring 3.50 mtr x 1.75mt x 1.50 mt with working depth 3.0mtr. The chamber made out of first class brick masonry wall 230 mm thick in 1:5 cement sand mortar,plastered from inside, 75 mm thick RCC roof slab, Road gullies 2 each, and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge . (Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates).
2
245871
122935.63
Gate & Security Building
-
-
-
Internal Sewerage System
-
-
-
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
33.53
13283
396.16
90 mm o/d SWR UPVC pipe lines laid complete
45.41
15652
344.69
75 mm o/d SWR UPVC pipe lines laid complete ( for Nahni traps to floor traps)
3.05
935
306.82
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm i/d pipes
-
-
-
Elbow 90 Degree (All side socketed)
4
650
162.57
Vent Cowls
2
90
45.4
Coupler
2
222
111.09
Single Tee With Door
2
472
236.32
Single Y-Junction with door (110 mm)
1
306
306.45
110x75 Reducer Tee
1
198
198.16
Cross Tee/Double Tee
1
256
256.84
For 90mm i/d pipes
-
-
-
Elbow 90 degree (all side socket)
4
483
120.85
Vent Cowls
2
75
37.63
Coupler
2
218
109.33
Single Tee With Door
2
433
216.8
Single Y-Junction
2
415
207.93
Floor Trap 110mm x 110mm (presumed)
1
338
338.38
Floor Trap 110mm x 75mm (presumed)
1
309
309.99
Nahani trap without jali 110x90mm (owc/ewc+washbasin)
4
689
172.43
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
-
-
-
110mm o/d
31
3139
101.27
90mm o/d
51
4371
85.71
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
M.S. Holder bats clamps for 100mm i/d as per table-1
6
1303
217.18
M.S. Holder bats clamps for 90mm i/d as per table-1
6
1217
202.84
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
2
3860
1930.01
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
1
6780
6780.33
Internal Water Supply System
-
-
-
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
-
-
-
Earth work upto 1.5 m. Depth All classes of soil except rocky
-
-
-
internal pipeline work around the building within plot area from main supply line
1.71
178
104.4
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (From main connecting pipe to building line at ground floor only )
-
-
-
32mm i/d pipe lines laid complete
7.62
3832
502.95
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( From main connecting pipe to building line only )
-
-
-
32mm i/d G.I. Union
1
258
258.57
Making connection with the existing D I/G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects.
2
790
395.39
Pipework within toilet area of building
-
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
CPVC SDR 11 Pipe & fitting 16mm o/d
9.14
1720
188.28
SDR 11 CPVC pipes & fittings 20mm o/d
6.1
1422
233.19
CPVC SDR 11 Pipe & fitting 25mm o/d
7.31
2200
301.04
Providing, fixing and jointing Chlorinated Polyvinyl Chloride (CPVC) Union Couplings(of approved make with the approval EIC) as per IS code in CPVC Pipe lines complete in all respect.
-
-
-
16mm o/d. CPVC SDR Union
4
500
125
20mm o/d. CPVC SDR Union
2
300
150
25mm o/d. CPVC SDR Union
2
350
175
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
-
-
-
qty same as GI P 15mm i/d to 25 mm (Table-2)
22.55
1639
72.69
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
Through wall 22.86 cm thick
4
1006
251.71
Cutting holes upto 23cm square for pipes in floor and roofs of cement concrete, reinforced concrete or reinforced brick work and making good the same & finishing according to existing finish where required.
-
-
-
Through floor or roof 22.50cm thick
8
1387
173.48
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
25mm i/d Brass Ball valves
1
555
555.02
Sanitary Installation
-
-
-
Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of
approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
-
-
-
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
2
10071
5035.73
Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.
2
5420
2710.41
Providing and fixing Stainless steel health faucet complete in all respect.
2
2399
1199.94
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut Refer Annexure--3
2
762
381.37
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
6
524
87.44
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 550 mm x 400 mm x 815mm
2
7614
3807.35
Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
2
4235
2117.54
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
6
1150
191.74
Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.
2
238
119.05
Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required
by the Engineer-in-charge.
2
1304
652.12
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
C.P brass towel ring
2
1919
959.74
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
2
1776
888.1
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
C.P. brass Bib cock long nose/ long body without flange
2
2429
1214.69
C.P Brass bib cock foam flow without flange
2
1932
966.06
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P.brass 15mm Angle valve without flange
11
9572
870.19
C.P.brass 15mm Concealed stop cock with flange (for shower)
2
2536
1268.41
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. (anglevalve+bib cock+spout+sink etc)
13
862
66.37
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.C.P. Brass extension piece, 25mm long to 50mm long
13
1465
112.72
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
2
2526
1263.15
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.
-
-
-
C.P. Brass fittings:
-
-
-
CP brass Acrylic Shelf size 460mmx130mm
2
2349
1174.65
Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.
1
1079
1079.84
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
2
773
386.63
providing and fixing in positon SS GRATING with frame of approved make ( to the approval of engineer in charge) complete in all respect
6
699
116.58
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
-
-
-
300 ltr Capacity
300
3414
11.38
Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball
-
-
-
Brass Ball Cock with rod and Plastic Ball 25mm i/d
1
950
950.98
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25mm i/d
1
198
198.82
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
-
-
-
For 300 ltr/500 ltr Water Tank
1
3072
3072.01
Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.
-
-
-
Flooring and Wall Tile
-
-
-
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
7.82
3320
424.56
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand)
7.82
9037
1155.69
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
7.82
4126
527.65
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the
manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry
@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
31.09
26038
837.53
Shooter Range
-
-
-
Internal Sewerage System
-
-
-
Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
28.95
11468
396.16
90 mm o/d SWR UPVC pipe lines laid complete
21.33
7352
344.69
75 mm o/d SWR UPVC pipe lines laid complete ( for Nahni traps to floor traps)
9.14
2804
306.82
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm i/d pipes
-
-
-
Elbow 90 Degree (All side socketed)
8
1300
162.57
Vent Cowls
3
136
45.4
Coupler
8
888
111.09
Single Tee With Door
8
1890
236.32
Single Y-Junction with door (110 mm)
1
306
306.45
110x75 Reducer Tee
1
198
198.16
Cross Tee/Double Tee
1
256
256.84
For 90mm i/d pipes
-
-
-
Elbow 90 degree (all side socket)
8
966
120.85
Vent Cowls
3
112
37.63
Coupler
8
874
109.33
Single Tee With Door
8
1734
216.8
Single Y-Junction
8
1663
207.93
Floor Trap 110mm x 110mm (presumed)
1
338
338.38
Floor Trap 110mm x 75mm (presumed)
1
309
309.99
Nahani trap without jali 110x90mm (owc/ewc+washbasin)
8
1379
172.43
Nahani trap without jali 110mmx75mm (urinal)
2
316
158.23
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
-
-
-
110mm o/d
64
6481
101.27
90mm o/d
101
8656
85.71
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
M.S. Holder bats clamps for 100mm i/d as per table-1
9
1954
217.18
M.S. Holder bats clamps for 90mm i/d as per table-1
9
1825
202.84
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
2
3860
1930.01
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
2
13560
6780.33
Internal Water Supply System
-
-
-
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
-
-
-
Earth work upto 1.5 m. Depth All classes of soil except rocky
-
-
-
internal pipeline work around the building within plot area from main supply line
24
2505
104.4
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (From main connecting pipe to building line at ground floor only )
-
-
-
40mm i/d pipe lines laid complete
60.96
34893
572.4
32mm i/d pipe lines laid complete
45.72
22994
502.95
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( From main connecting pipe to building line only )
-
-
-
32mm i/d G.I. Union
2
517
258.57
40mm i/d G.I. Union
3
1029
343.08
Making connection with the existing D I/G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects.
2
790
395.39
Pipework within toilets area of building
-
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
CPVC SDR 11 Pipe & fitting 16mm o/d
24.38
4590
188.28
SDR 11 CPVC pipes & fittings 20mm o/d
24.38
5685
233.19
CPVC SDR 11 Pipe & fitting 25mm o/d
24.38
7339
301.04
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
-
-
-
qty same as GI P 15mm i/d to 25 mm (Table-2)
73.14
5316
72.69
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
Through wall 11.43 cm thick
16
2822
176.42
Through wall 22.86 cm thick
16
4027
251.71
Cutting holes upto 23cm square for pipes in floor and roofs of cement concrete, reinforced concrete or reinforced brick work and making good the same & finishing according to existing finish where required.
-
-
-
Through floor or roof 22.50cm thick
6
1040
173.48
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
25mm i/d Brass Ball valves
3
1665
555.02
Sanitary Installation
-
-
-
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
4
20142
5035.73
Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.
4
10841
2710.41
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.
2
13802
6901.48
Providing and fixing partition for different type of urinals.
-
-
-
19 to 20 mm thick Granite stone partition size 375mm x 750mm
1
1136
1136.73
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut Refer Annexure--3
4
1525
381.37
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
8
699
87.44
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 560mm x 450mm (Under counter oval)
4
18107
4526.89
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
-
-
-
Qty same as OWC+EWC+WB+Steel sink
10
1917
191.74
Providing & fixing in position C.P. copper tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.
-
-
-
Qty same as WB+Steel sink
6
714
119.05
Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required
by the Engineer-in-charge.
6
3912
652.12
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
C.P brass towel ring
4
3838
959.74
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
4
3552
888.1
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
C.P Brass bib cock foam flow without flange
4
3864
966.06
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P.brass 15mm Angle valve without flange
26
22624
870.19
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. (anglevalve+bib cock+spout+sink etc)
30
1991
66.37
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.C.P. Brass extension piece, 25mm long to 50mm long
30
3381
112.72
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
-
-
-
Size 600mmx450mm
4
5052
1263.15
Size 1500mmx600mm or any other size (for changing room)
6
17490
2915.03
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.
-
-
-
C.P. Brass fittings:
-
-
-
CP brass Acrylic Shelf size 460mmx130mm
4
4698
1174.65
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
4
1546
386.63
providing and fixing in positon SS GRATING with frame of approved make ( to the approval of engineer in charge) complete in all respect
12
1398
116.58
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
1500
17070
11.38
Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball
-
-
-
Brass Ball Cock with rod and Plastic Ball 25mm i/d
2
1901
950.98
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25mm i/d
2
397
198.82
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
-
-
-
For 500 ltr Water Tank
1
3072
3072.01
For 1000 ltr Water Tank
1
4165
4165.54
Flooring and Wall Tile
-
-
-
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
30.94
13135
424.56
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand)
30.94
35757
1155.69
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
30.94
16325
527.65
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the
manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry
@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
101.03
84615
837.53
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
3.25
11223
3453.37
Extra labour for projected nosing of stair case of any shape and design
6.1
411
67.42
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
4
4053
1013.47
Providing and fixing modular vanity of 600 x 600 x 400 size for supporting counter top wash basins
1
6000
6000
Drinking Water Cooler & water dispensors
-
-
-
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer Detail as per Annexure-3
2
75181
37590.99
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable-capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable-nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable-size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable-capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2 KVA
2
7705
3852.65
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
2
26739
13369.97
Hostels
-
-
-
Internal Sewerage System
-
-
-
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
162.76
64479
396.16
90 mm o/d SWR UPVC pipe lines laid complete
252.06
86882
344.69
75 mm o/d SWR UPVC pipe lines laid complete ( for Nahni traps to floor traps)
45.72
14027
306.82
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm i/d pipes
-
-
-
Elbow 90 Degree (All side socketed)
27
4389
162.57
Vent Cowls
6
272
45.4
Coupler
36
3999
111.09
Single Tee With Door
27
6380
236.32
Single Y-Junction with door (110 mm)
18
5516
306.45
110x75 Reducer Tee
18
3566
198.16
Cross Tee/Double Tee
18
4623
256.84
For 90mm i/d pipes
-
-
-
Elbow 90 degree (all side socket)
27
3262
120.85
Vent Cowls
18
677
37.63
Coupler
36
3935
109.33
Single Tee With Door
27
5853
216.8
Single Y-Junction
8
1663
207.93
Floor Trap 110mm x 110mm (presumed)
5
1691
338.38
Floor Trap 110mm x 75mm (presumed)
5
1549
309.99
Nahani trap without jali 110x90mm (owc/ewc+washbasin)
46
7931
172.43
Nahani trap without jali 110mmx75mm (urinal)
7
1107
158.23
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
-
-
-
110mm o/d
246
24912
101.27
90mm o/d
442
37883
85.71
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
M.S. Holder bats clamps for 100mm i/d as per table-1
18
3909
217.18
M.S. Holder bats clamps for 90mm i/d as per table-1
54
10953
202.84
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
11
21230
1930.01
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
10
67803
6780.33
Internal Water Supply System
-
-
-
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
-
-
-
Earth work upto 1.5 m. Depth All classes of soil except rocky
-
-
-
internal pipeline work around the building within plot area from main supply line
10.97
1145
104.4
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (From main connecting pipe to building line at ground floor only )
-
-
-
40mm i/d pipe lines laid complete
12.19
6977
572.4
32mm i/d pipe lines laid complete
12.19
6130
502.95
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( From main connecting pipe to building line only )
-
-
-
32mm i/d G.I. Union
12
3102
258.57
40mm i/d G.I. Union
2
686
343.08
Making connection with the existing D I/G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects.
2
790
395.39
Pipework within toilets
-
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
CPVC SDR 11 Pipe & fitting 16mm o/d
141.73
26684
188.28
SDR 11 CPVC pipes & fittings 20mm o/d
58.52
13646
233.19
CPVC SDR 11 Pipe & fitting 25mm o/d
43.89
13212
301.04
Providing, fixing and jointing Chlorinated Polyvinyl Chloride (CPVC) Union Couplings(of approved make with the approval EIC) as per IS code in CPVC Pipe lines complete in all respect.
-
-
-
16mm o/d. CPVC SDR Union
30
3750
125
20mm o/d. CPVC SDR Union
15
2250
150
25mm o/d. CPVC SDR Union
19
3325
175
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
-
-
-
qty same as GI P 15mm i/d to 25 mm (Table-2)
244.14
17746
72.69
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
Through wall 11.43 cm thick
120
21170
176.42
Through wall 22.86 cm thick
30
7551
251.71
Cutting holes upto 23cm square for pipes in floor and roofs of cement concrete, reinforced concrete or reinforced brick work and making good the same & finishing according to existing finish where required. (for swr & cpvc pipes)
-
-
-
Through floor or roof 22.50cm thick
30
5204
173.48
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
25mm i/d Brass Ball valves
4
2220
555.02
32mm i/d Brass Ball valves
12
10726
893.91
Sanitary Installation
-
-
-
Providing and fixing in position set of EWC and WHB size 46x36 cm for Handicapped person of approved make (to the approval of the Engineer-in-charge) consisting of matching
cistern, one pair mounting brackets, seat cover, one no. hinges rail 76cm and 4 no. grab rails 60cm complete in all respect and to the entire satisfaction of Engineer-in-charge.
3
202183
67394.5
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
24
120857
5035.73
Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.
24
65049
2710.41
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.
12
82817
6901.48
Providing and fixing partition for different type of urinals.
-
-
-
19 to 20 mm thick Granite stone partition size 375mm x 750mm
6
6820
1136.73
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut Refer Annexure--3
27
10296
381.37
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
114
9968
87.44
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 560mm x 450mm (under counter oval)
24
108645
4526.89
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
-
-
-
Qty same as OWC+EWC+WB+Steel sink
81
15530
191.74
Providing & fixing in position C.P. copper tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P. copper tube connection of size 15 mm x 450 mm with C.P. Brass nut
12
4374
364.51
Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.
-
-
-
Qty same as WB+Steel sink+urinal+washbasin
36
4285
119.05
Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required by the Engineer-in-charge.
36
23476
652.12
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
C.P brass towel ring
27
25912
959.74
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
51
45293
888.1
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
C.P. brass Bib cock long nose/ long body without flange
60
72881
1214.69
C.P Brass bib cock foam flow without flange
27
26083
966.06
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P.brass 15mm Angle valve without flange
125
108773
870.19
C.P.brass 15mm Concealed stop cock with flange (for shower)
48
60883
1268.41
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. (anglevalve+bib cock+spout+sink etc)
152
10088
66.37
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.C.P. Brass extension piece, 25mm long to 50mm long
152
17133
112.72
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
27
34105
1263.15
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.
-
-
-
C.P. Brass fittings:
-
-
-
CP brass Acrylic Shelf size 460mmx130mm
27
31715
1174.65
Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.
24
25916
1079.84
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
48
18558
386.63
providing and fixing in positon SS GRATING with frame of approved make ( to the approval of engineer in charge) complete in all respect
63
7344
116.58
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
19500
221910
11.38
Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball
-
-
-
Brass Ball Cock with rod and Plastic Ball 25mm i/d
21
19970
950.98
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25mm i/d
21
4175
198.82
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
-
-
-
For 500 ltr Water Tank
3
9709
3236.36
For 1000 ltr Water Tank
18
78991
4388.4
Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing
complete in all respect.
25 litre capacity water heater
12
111888
9324.06
Flooring and Wall Tile
-
-
-
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
437.88
185906
424.56
Extra Rate for First Floor
145.96
461
3.16
Extra Rate for Second Floor
145.96
922
6.32
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand)
437.88
506053
1155.69
Extra Rate for First Floor
145.96
461
3.16
Extra Rate for Second Floor
145.96
922
6.32
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
437.88
231047
527.65
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the
manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry
@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
1078.97
903669
837.53
Extra Rate for First Floor
359.66
1136
3.16
Extra Rate for Second Floor
359.66
2273
6.32
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
22.27
76906
3453.37
Extra Rate for First Floor
7.42
23
3.16
Extra Rate for Second Floor
7.42
46
6.32
Extra labour for projected nosing of stair case of any shape and design
21.94
1479
67.42
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
24
24323
1013.47
Drinking Water Cooler & water dispensors
-
-
-
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer Detail as per Annexure-3
3
112772
37590.99
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable-capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable-nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable-size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable-capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2 KVA
3
11557
3852.65
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
3
40109
13369.97
Air conditioning works
-
-
-
Providing & Installing & Erection split type wall mounted air conditioner capacity 1.5 tonne 2 Star Make:- Toshiba, Mitsubishi Electric, Daikin, O' General, Hitachi with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
-
-
-
As per detail attached in table
71
4767650
67150
Providing & Installing & Erection split type wall mounted air conditioner capacity 2.0 tonne 3 Star Make:- Toshiba, Mitsubishi Electric, Daikin, O' General, Hitachi with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
-
-
-
As per detail attached in table
13
959998
73846
Providing laying hard soft copper concealing of copper pipes of dia 12.7mm od (insulation = 13mm)/9.5mm od (insulation = 13m) as per requirement and wall thickness 0.8mm, insulated, 4mm electric wire sheathed 3 core double insulated / taping laying in chase cutting of wall and repairing the same within the building and installing charges complete in all respects.
-
-
-
For 1.50 tonne split AC
75
63150
842
Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.
uPVC Pipe 6 Kgf/cm2 =40mm i/d
-
-
-
For 1.50 tonne split AC
75
17336
231.15
Mess Block
-
-
-
Internal Sewerage System
-
-
-
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
10.67
4227
396.16
90 mm o/d SWR UPVC pipe lines laid complete
42.67
14707
344.69
75 mm o/d SWR UPVC pipe lines laid complete ( for Nahni traps to floor traps)
9.14
2804
306.82
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm i/d pipes
-
-
-
Elbow 90 Degree (All side socketed)
2
325
162.57
Vent Cowls
1
45
45.4
Coupler
2
222
111.09
Single Tee With Door
2
472
236.32
Reducing Door Tee 160mm x 110mm
9
3949
438.79
Reducing Single Y 160mm x 110mm
9
4468
496.48
Single Y-Junction with door (110 mm)
9
2758
306.45
110x75 Reducer Tee
9
1783
198.16
Cross Tee/Double Tee
9
2311
256.84
For 90mm i/d pipes
-
-
-
Elbow 90 degree (all side socket)
2
241
120.85
Vent Cowls
1
37
37.63
Coupler
4
437
109.33
Single Tee With Door
2
433
216.8
Single Y-Junction
8
1663
207.93
Floor Trap 110mm x 110mm (presumed)
3
1015
338.38
Floor Trap 110mm x 75mm (presumed)
3
929
309.99
Nahani trap without jali 110x90mm (owc/ewc+washbasin)
6
1034
172.43
Nahani trap without jali 110mmx75mm (urinal)
1
158
158.23
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
-
-
-
110mm o/d
18
1822
101.27
90mm o/d
74
6342
85.71
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
M.S. Holder bats clamps for 100mm i/d as per table-1
3
651
217.18
M.S. Holder bats clamps for 90mm i/d as per table-1
3
608
202.84
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
4
7720
1930.01
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
4
27121
6780.33
Internal Water Supply System
-
-
-
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
-
-
-
Earth work upto 1.5 m. Depth All classes of soil except rocky
11.66
1217
104.4
internal pipeline work around the building within plot area from main supply line
-
-
-
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (From main connecting pipe to building line at ground floor only )
-
-
-
40mm i/d pipe lines laid complete
21.34
12215
572.4
32mm i/d pipe lines laid complete
30.48
15329
502.95
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( From main connecting pipe to building line only )
-
-
-
32mm i/d G.I. Union
2
517
258.57
40mm i/d G.I. Union
2
686
343.08
Making connection with the existing D I/G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects.
4
1581
395.39
Pipework within toilets area of building
-
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
CPVC SDR 11 Pipe & fitting 16mm o/d
24.38
4590
188.28
SDR 11 CPVC pipes & fittings 20mm o/d
15.85
3696
233.19
CPVC SDR 11 Pipe & fitting 25mm o/d
15.24
4587
301.04
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
-
-
-
qty same as GI P 15mm i/d to 25 mm (Table-2)
55.47
4032
72.69
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
Through wall 11.43 cm thick
6
1058
176.42
Through wall 22.86 cm thick
6
1510
251.71
Cutting holes upto 23cm square for pipes in floor and roofs of cement concrete, reinforced concrete or reinforced brick work and making good the same & finishing according to existing finish where required.
-
-
-
Through floor or roof 22.50cm thick
10
1734
173.48
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
20mm i/d Brass Ball valves
3
1070
356.75
25mm i/d Brass Ball valves
1
555
555.02
32mm i/d Brass Ball valves
2
1787
893.91
Sanitary Installation
-
-
-
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
1
5035
5035.73
Providing and fixing vitreous Chinware chinware 10 Ltr. Capacity with PVC internal fitting (Size 34.x 50 x 22.5 cm) of
approved make(to the approval of the Engineer-in-charge) including PVC fittings and brackets complete.
1
4297
4297.23
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.
1
6901
6901.48
Providing and fixing partition for different type of urinals.
-
-
-
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
3
262
87.44
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 550 mm x 400 mm x 815mm
1
3807
3807.35
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 560mm x 450mm (over counter oval)
1
7537
7537.79
Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.
-
-
-
Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm
2
16308
8154.09
Double bowl Sink without drain board Overall size 1330x515 bowl size 560x410x200mm
3
46784
15594.96
Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
1
2117
2117.54
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
-
-
-
Qty same as OWC+EWC+WB+Steel sink
7
1342
191.74
Providing & fixing in position C.P. copper tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P. copper tube connection of size 15 mm x 450 mm with C.P. Brass nut
2
729
364.51
Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.
-
-
-
Qty same as WB+Steel sink
9
1071
119.05
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
C.P brass towel ring
3
2879
959.74
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
8
7104
888.1
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
C.P. brass Bib cock long nose/ long body without flange
2
2429
1214.69
C.P Brass bib cock foam flow without flange
1
966
966.06
Providing & fixing in position C.P brass Sink mixer swivel spout (Wall mounted) of approved make (to the approval of Engineer-incharge) complete in all respect.
4
12469
3117.31
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P.brass 15mm Angle valve without flange
32
27846
870.19
C.P.brass 15mm Concealed stop cock with flange (for shower)
2
2536
1268.41
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. (anglevalve+bib cock+spout+sink etc)
37
2455
66.37
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.C.P. Brass extension piece, 25mm long to 50mm long
37
4170
112.72
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
2
2526
1263.15
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.
-
-
-
C.P. Brass fittings:
-
-
-
CP brass Acrylic Shelf size 460mmx130mm
1
1174
1174.65
Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.
1
1079
1079.84
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
4
1546
386.63
providing and fixing in positon SS GRATING with frame of approved make ( to the approval of engineer in charge) complete in all respect
13
1515
116.58
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
10000
113800
11.38
Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball
-
-
-
Brass Ball Cock with rod and Plastic Ball 25mm i/d
6
5705
950.98
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25mm i/d
2
397
198.82
G.I. tank nipple 40mm i/d
4
1508
377.1
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
-
-
-
For 1000 ltr Water Tank
2
8331
4165.54
For 2000 ltr Water Tank
4
23130
5782.66
Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing
complete in all respect.
25 litre capacity water heater
2
18648
9324.06
Flooring and Wall Tile
-
-
-
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
103.44
43916
424.56
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand)
103.44
119544
1155.69
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
103.44
54580
527.65
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the
manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry
@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
222.09
186007
837.53
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
19.9
68722
3453.37
Extra labour for projected nosing of stair case of any shape and design
27.58
1859
67.42
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
5
5067
1013.47
Drinking Water Cooler & water dispensors
-
-
-
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer Detail as per Annexure-3
2
75181
37590.99
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable-capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable-nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable-size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable-capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2 KVA
2
7705
3852.65
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
2
26739
13369.97
Gymnasium & Toilet Block
-
-
-
Internal Sewerage System
-
-
-
Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
28.95
11468
396.16
90 mm o/d SWR UPVC pipe lines laid complete
57.91
19961
344.69
75 mm o/d SWR UPVC pipe lines laid complete ( for Nahni traps to floor traps)
9.14
2804
306.82
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm i/d pipes
-
-
-
Elbow 90 Degree (All side socketed)
8
1300
162.57
Vent Cowls
3
136
45.4
Coupler
8
888
111.09
Single Tee With Door
8
1890
236.32
Single Y-Junction with door (110 mm)
1
306
306.45
110x75 Reducer Tee
1
198
198.16
Cross Tee/Double Tee
1
256
256.84
For 90mm i/d pipes
-
-
-
Elbow 90 degree (all side socket)
8
966
120.85
Vent Cowls
3
112
37.63
Coupler
8
874
109.33
Single Tee With Door
8
1734
216.8
Single Y-Junction
8
1663
207.93
Floor Trap 110mm x 110mm (presumed)
2
676
338.38
Floor Trap 110mm x 75mm (presumed)
2
1208
604.24
Nahani trap without jali 110x90mm (owc/ewc+washbasin)
10
1724
172.43
Nahani trap without jali 110mmx75mm (urinal)
3
474
158.23
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
-
-
-
110mm o/d
64
6481
101.27
90mm o/d
123
10542
85.71
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
M.S. Holder bats clamps for 100mm i/d as per table-1
9
1954
217.18
M.S. Holder bats clamps for 90mm i/d as per table-1
9
1825
202.84
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
3
5790
1930.01
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
4
27121
6780.33
Internal Water Supply System
-
-
-
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
-
-
-
Earth work upto 1.5 m. Depth All classes of soil except rocky
24
2505
104.4
internal pipeline work around the building within plot area from main supply line
-
-
-
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (From main connecting pipe to building line at ground floor only )
-
-
-
40mm i/d pipe lines laid complete
60.96
34893
572.4
32mm i/d pipe lines laid complete
45.72
22994
502.95
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( From main connecting pipe to building line only )
-
-
-
32mm i/d G.I. Union
2
517
258.57
40mm i/d G.I. Union
2
686
343.08
Making connection with the existing D I/G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects.
4
1581
395.39
Pipework within toilets area of building
-
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
CPVC SDR 11 Pipe & fitting 16mm o/d
24.38
4590
188.28
SDR 11 CPVC pipes & fittings 20mm o/d
24.38
5685
233.19
CPVC SDR 11 Pipe & fitting 25mm o/d
24.38
7339
301.04
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
-
-
-
qty same as GI P 15mm i/d to 25 mm (Table-2)
73.14
5316
72.69
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
Through wall 11.43 cm thick
32
5645
176.42
Through wall 22.86 cm thick
32
8054
251.71
Cutting holes upto 23cm square for pipes in floor and roofs of cement concrete, reinforced concrete or reinforced brick work and making good the same & finishing according to existing finish where required.
-
-
-
Through floor or roof 22.50cm thick
6
1040
173.48
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
20mm i/d Brass Ball valves
2
713
356.75
25mm i/d Brass Ball valves
8
4440
555.02
32mm i/d Brass Ball valves
8
7151
893.91
Sanitary Installation
-
-
-
Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of
approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
-
-
-
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
5
25178
5035.73
Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.
5
13552
2710.41
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.
3
20704
6901.48
Providing and fixing partition for different type of urinals.
-
-
-
19 to 20 mm thick Granite stone partition size 375mm x 750mm
2
2273
1136.73
Providing and fixing Stainless steel health faucet complete in all respect.
5
5999
1199.94
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut Refer Annexure--3
5
1906
381.37
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
18
1573
87.44
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 550 mm x 400 mm x 815mm
1
3807
3807.35
Size 560mm x 450mm (Under counter oval)
6
27161
4526.89
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.
-
-
-
Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
1
2117
2117.54
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
-
-
-
Qty same as OWC+EWC+WB+Steel sink
24
4601
191.74
Providing & fixing in position C.P. copper tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.
-
-
-
Qty same as WB+Steel sink
15
1785
119.05
Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required
by the Engineer-in-charge.
15
9781
652.12
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
C.P brass towel ring
5
4798
959.74
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
5
4440
888.1
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
C.P. brass Bib cock long nose/ long body without flange
8
9717
1214.69
C.P Brass bib cock foam flow without flange
5
4830
966.06
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P.brass 15mm Angle valve without flange
37
32197
870.19
C.P.brass 15mm Concealed stop cock with flange (for shower)
8
10147
1268.41
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. (anglevalve+bib cock+spout+sink etc)
50
3318
66.37
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.C.P. Brass extension piece, 25mm long to 50mm long
50
5636
112.72
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
-
-
-
Size 600mmx450mm
7
8842
1263.15
Size 1500mmx600mm or any other size (for changing room)
8
10105
1263.15
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.
-
-
-
C.P. Brass fittings:
-
-
-
CP brass Acrylic Shelf size 460mmx130mm
5
5873
1174.65
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
14
5412
386.63
providing and fixing in positon SS GRATING with frame of approved make ( to the approval of engineer in charge) complete in all respect
14
1632
116.58
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
1500
17070
11.38
Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball
-
-
-
Brass Ball Cock with rod and Plastic Ball 25mm i/d
2
1901
950.98
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25mm i/d
2
397
198.82
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
-
-
-
For 500 ltr Water Tank
1
3072
3072.01
For 1000 ltr Water Tank
1
4165
4165.54
Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.
-
-
-
Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing
complete in all respect.
25 litre capacity water heater
2
18648
9324.06
Flooring and Wall Tile
-
-
-
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
60.07
25503
424.56
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand)
60.07
69422
1155.69
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
60.07
31695
527.65
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the
manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry
@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
166.12
139130
837.53
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
7.26
25071
3453.37
Extra labour for projected nosing of stair case of any shape and design
11.35
765
67.42
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
6
6080
1013.47
Drinking Water Cooler & water dispensors
-
-
-
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer Detail as per Annexure-3
2
75181
37590.99
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable-capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable-nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable-size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable-capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2 KVA
2
7705
3852.65
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
2
26739
13369.97
Staff Block
-
-
-
Internal Sewerage System
-
-
-
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
57.91
22941
396.16
90 mm o/d SWR UPVC pipe lines laid complete
53.03
18278
344.69
75 mm o/d SWR UPVC pipe lines laid complete ( for Nahni traps to floor traps)
13.72
4209
306.82
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm i/d pipes
-
-
-
Elbow 90 Degree (All side socketed)
6
975
162.57
Vent Cowls
3
136
45.4
Coupler
6
666
111.09
Single Tee With Door
6
1417
236.32
Single Y-Junction with door (110 mm)
18
5516
306.45
110x75 Reducer Tee
18
3566
198.16
Cross Tee/Double Tee
18
4623
256.84
For 90mm i/d pipes
-
-
-
Elbow 90 degree (all side socket)
6
725
120.85
Vent Cowls
3
112
37.63
Coupler
6
655
109.33
Single Tee With Door
6
1300
216.8
Single Y-Junction
8
1663
207.93
Floor Trap 110mm x 110mm (presumed)
1
338
338.38
Floor Trap 110mm x 75mm (presumed)
1
309
309.99
Nahani trap without jali 110x90mm (owc/ewc+washbasin)
6
1034
172.43
Nahani trap without jali 110mmx75mm (urinal)
2
316
158.23
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
-
-
-
110mm o/d
61
6177
101.27
90mm o/d
96
8228
85.71
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
M.S. Holder bats clamps for 100mm i/d as per table-1
9
1954
217.18
M.S. Holder bats clamps for 90mm i/d as per table-1
9
1825
202.84
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
4
7720
1930.01
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
4
27121
6780.33
Internal Water Supply System
-
-
-
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
-
-
-
Earth work upto 1.5 m. Depth All classes of soil except rocky
15.09
1575
104.4
internal pipeline work around the building within plot area from main supply line
-
-
-
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (From main connecting pipe to building line at ground floor only )
-
-
-
40mm i/d pipe lines laid complete
30.48
17446
572.4
32mm i/d pipe lines laid complete
36.58
18397
502.95
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( From main connecting pipe to building line only )
-
-
-
32mm i/d G.I. Union
2
517
258.57
40mm i/d G.I. Union
2
686
343.08
Making connection with the existing D I/G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects.
4
1581
395.39
Pipework within toilets and pantry area of building
-
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
CPVC SDR 11 Pipe & fitting 16mm o/d
57.91
10903
188.28
SDR 11 CPVC pipes & fittings 20mm o/d
24.08
5615
233.19
CPVC SDR 11 Pipe & fitting 25mm o/d
18.29
5506
301.04
Providing, fixing and jointing Chlorinated Polyvinyl Chloride (CPVC) Union Couplings(of approved make with the approval EIC) as per IS code in CPVC Pipe lines complete in all respect.
-
-
-
16mm o/d. CPVC SDR Union
12
1500
125
20mm o/d. CPVC SDR Union
6
900
150
25mm o/d. CPVC SDR Union
6
1050
175
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
-
-
-
qty same as GI P 15mm i/d to 25 mm (Table-2)
100.28
7289
72.69
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
Through wall 11.43 cm thick
48
8468
176.42
Through wall 22.86 cm thick
12
3020
251.71
Cutting holes upto 23cm square for pipes in floor and roofs of cement concrete, reinforced concrete or reinforced brick work and making good the same & finishing according to existing finish where required.
-
-
-
Through floor or roof 22.50cm thick
10
1734
173.48
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
25mm i/d Brass Ball valves
2
1110
555.02
Sanitary Installation
-
-
-
Providing and fixing in position set of EWC and WHB size 46x36 cm for Handicapped person of approved make (to the approval of the Engineer-in-charge) consisting of matching
cistern, one pair mounting brackets, seat cover, one no. hinges rail 76cm and 4 no. grab rails 60cm complete in all respect and to the entire satisfaction of Engineer-in-charge.
1
67394
67394.5
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
2
10071
5035.73
Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.
2
5420
2710.41
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.
2
13802
6901.48
Providing and fixing partition for different type of urinals.
-
-
-
19 to 20 mm thick Granite stone partition size 375mm x 750mm
1
1136
1136.73
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut Refer Annexure--3
3
1144
381.37
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
10
874
87.44
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 560mm x 450mm (under counter oval)
2
9053
4526.89
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.
-
-
-
Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm
-
-
-
Double bowl Sink without drain board Overall size 1330x515 bowl size 560x410x200mm
1
15594
15594.96
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
-
-
-
Qty same as OWC+EWC+WB+Steel sink
13
2492
191.74
Providing & fixing in position C.P. copper tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P. copper tube connection of size 15 mm x 450 mm with C.P. Brass nut
4
1458
364.51
Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.
-
-
-
Qty same as WB+Steel sink+urinal+washbasin
5
595
119.05
Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required
by the Engineer-in-charge.
5
3260
652.12
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
C.P brass towel ring
3
2879
959.74
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
5
4440
888.1
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
C.P. brass Bib cock long nose/ long body without flange
4
4858
1214.69
C.P Brass bib cock foam flow without flange
3
2898
966.06
Providing & fixing in position C.P brass Sink mixer swivel spout (Wall mounted) of approved make (to the approval of Engineer-incharge) complete in all respect.
2
6234
3117.31
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P.brass 15mm Angle valve without flange
24
20884
870.19
C.P.brass 15mm Concealed stop cock with flange (for shower)
4
5073
1268.41
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. (anglevalve+bib cock+spout+sink etc)
29
1924
66.37
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.C.P. Brass extension piece, 25mm long to 50mm long
29
3268
112.72
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
3
3789
1263.15
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.
-
-
-
C.P. Brass fittings:
-
-
-
CP brass Acrylic Shelf size 460mmx130mm
3
3523
1174.65
Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.
2
2159
1079.84
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
3
1159
386.63
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
1000
11380
11.38
Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball
-
-
-
Brass Ball Cock with rod and Plastic Ball 25mm i/d
2
1901
950.98
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25mm i/d
2
397
198.82
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
-
-
-
For 500 ltr Water Tank
2
6144
3072.01
Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.
-
-
-
Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing
complete in all respect.
25 litre capacity water heater
2
18648
9324.06
Flooring and Wall Tile
-
-
-
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
38.78
16464
424.56
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand)
38.78
44817
1155.69
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
38.78
20462
527.65
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the
manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry
@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
125.8
105361
837.53
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
4.76
16438
3453.37
Extra labour for projected nosing of stair case of any shape and design
6.71
452
67.42
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
1
1013
1013.47
Drinking Water Cooler & water dispensors
-
-
-
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer Detail as per Annexure-3
1
37590
37590.99
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable-capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable-nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable-size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable-capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2 KVA
1
3852
3852.65
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
1
13369
13369.97
Air conditioning works
-
-
-
Providing & Installing & Erection split type wall mounted air conditioner capacity 1.5 tonne 2 Star Make:- Toshiba, Mitsubishi Electric, Daikin, O' General, Hitachi with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
6
402900
67150
Providing & Installing & Erection split type wall mounted air conditioner capacity 2.0 tonne 3 Star Make:- Toshiba, Mitsubishi Electric, Daikin, O' General, Hitachi with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
13
959998
73846
Providing laying hard soft copper concealing of copper pipes of dia 12.7mm od (insulation = 13mm)/9.5mm od (insulation = 13m) as per requirement and wall thickness 0.8mm, insulated, 4mm electric wire sheathed 3 core double insulated / taping laying in chase cutting of wall and repairing the same within the building and installing charges complete in all respects.
60
50520
842
Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.
uPVC Pipe 6 Kgf/cm2
40mm i/d
60
13869
231.15
Admin & Academic Block
-
-
-
Internal Sewerage System
-
-
-
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
-
-
-
110 mm o/d pipes
114
68312
599.23
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
-
-
-
For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L.
For all classes of soil except rocky
96.84
11732
121.15
Sand Filling
-
-
-
For covering Sewer Line Type II
14.2
7100
500
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
89.61
35499
396.16
90 mm o/d SWR UPVC pipe lines laid complete
45.72
15759
344.69
75 mm o/d SWR UPVC pipe lines laid complete (for Nahni traps to floor traps)
18.29
5611
306.82
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm i/d pipes
-
-
-
Elbow 90 Degree (All side socketed)
42
6827
162.57
Vent Cowls
7
317
45.4
Coupler
35
3888
111.09
Single Tee With Door
28
6616
236.32
Single Y-Junction with door (110 mm)
14
4290
306.45
110x75 Reducer Tee
14
2774
198.16
Cross Tee/Double Tee
14
3595
256.84
For 90mm i/d pipes
-
-
-
Elbow 90 degree (all side socket)
42
5075
120.85
Vent Cowls
7
263
37.63
Coupler
28
3061
109.33
Single Tee With Door
40
8672
216.8
Single Y-Junction
8
1663
207.93
Floor Trap 110mm x 110mm (presumed)
6
2030
338.38
Floor Trap 110mm x 75mm (presumed)
6
1859
309.99
Nahani trap without jali 110mmx90mm (owc/ewc+urinal)
21
3621
172.43
Nahani trap without jali 110mmx75mm (washbasin+ sink)
2
316
158.23
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
-
-
-
110mm o/d
254
25722
101.27
90mm o/d
335
28712
85.71
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
M.S. Holder bats clamps for 100mm i/d as per table-1
21
4560
217.18
M.S. Holder bats clamps for 90mm i/d as per table-1
21
4259
202.84
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
9
17370
1930.01
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
10
67803
6780.33
Internal Water Supply System
-
-
-
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
-
-
-
Earth work upto 1.5 m. Depth All classes of soil except rocky
15.08
1574
104.4
internal pipeline work around the building within plot area from main supply line
-
-
-
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (From main connecting pipe to building line at ground floor only )
-
-
-
40mm i/d pipe lines laid complete
33.52
19186
572.4
32mm i/d pipe lines laid complete
33.52
16858
502.95
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( From main connecting pipe to building line only )
-
-
-
32mm i/d G.I. Union
2
517
258.57
40mm i/d G.I. Union
2
686
343.08
Making connection with the existing D I/G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects.
4
1581
395.39
Pipework within toilets and kitchen area of building
-
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
CPVC SDR 11 Pipe & fitting 16mm o/d
63.09
11878
188.28
SDR 11 CPVC pipes & fittings 20mm o/d
34.44
8031
233.19
CPVC SDR 11 Pipe & fitting 25mm o/d
21.94
6604
301.04
Providing, fixing and jointing Chlorinated Polyvinyl Chloride (CPVC) Union Couplings(of approved make with the approval EIC) as per IS code in CPVC Pipe lines complete in all respect.
-
-
-
16mm o/d. CPVC SDR Union
19
2375
125
20mm o/d. CPVC SDR Union
19
2850
150
25mm o/d. CPVC SDR Union
19
3325
175
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
-
-
-
qty same as GI Pipe 15mm i/d to 25 mm (Table-2)
119.47
8684
72.69
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
Through wall 11.43 cm thick
28
4939
176.42
Through wall 22.86 cm thick
19
4782
251.71
Cutting holes upto 23cm square for pipes in floor and roofs of cement concrete, reinforced concrete or reinforced brick work and making good the same & finishing according to existing finish where required.
-
-
-
Through floor or roof 22.50cm thick
20
3469
173.48
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I./CPVC Pipe lines including all carriages complete.
-
-
-
20mm i/d Brass Ball valves
9
3210
356.75
25mm i/d Brass Ball valves
5
2775
555.02
32mm i/d Brass Ball valves
2
1787
893.91
Sanitary Installation
-
-
-
Providing and fixing in position set of EWC and WHB size 46x36 cm for Handicapped person of approved make (to the approval of the Engineer-in-charge) consisting of matching
cistern, one pair mounting brackets, seat cover, one no. hinges rail 76cm and 4 no. grab rails 60cm complete in all respect and to the entire satisfaction of Engineer-in-charge.
1
67394
67394.5
Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of
approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
-
-
-
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
13
65464
5035.73
Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern.
13
35235
2710.41
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.
13
89719
6901.48
Providing and fixing partition for different type of urinals.
-
-
-
19 to 20 mm thick Granite stone partition size 375mm x 750mm
10
11367
1136.73
Providing and fixing Stainless steel health faucet complete in all respect.
14
16799
1199.94
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut Refer Annexure--3
-
-
-
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
32
2798
87.44
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 550 mm x 400 mm x 815mm
2
7614
3807.35
Size 560mm x 450mm (under counter oval)
8
36215
4526.89
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.
-
-
-
Rectangular Sink with Deluxe Border
Single Bowl Overall Size 700 mm x 555 mm x 230 mm
-
-
-
Double bowl Sink without drain board Overall size 1330x515 bowl size 560x410x200mm
1
15594
15594.96
Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
2
4235
2117.54
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
-
-
-
Qty same as OWC+EWC+WB+Steel sink
42
8053
191.74
Providing & fixing in position C.P. copper tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P. copper tube connection of size 15 mm x 450 mm with C.P. Brass nut
2
729
364.51
Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.
-
-
-
Qty same as WB+Steel sink
12
1428
119.05
Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required
by the Engineer-in-charge.
12
7825
652.12
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
C.P brass towel ring
11
10557
959.74
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
11
9769
888.1
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
C.P. brass Bib cock long nose/ long body without flange
4
4858
1214.69
C.P Brass bib cock foam flow without flange
14
13524
966.06
Providing & fixing in position C.P brass Sink mixer swivel spout (Wall mounted) of approved make (to the approval of Engineer-incharge) complete in all respect.
2
6234
3117.31
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P.brass 15mm Angle valve without flange
67
58302
870.19
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. (anglevalve+bib cock+spout+sink etc)
83
5508
66.37
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.C.P. Brass extension piece, 25mm long to 50mm long
83
9355
112.72
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
11
13894
1263.15
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.
-
-
-
C.P. Brass fittings:
-
-
-
CP brass Acrylic Shelf size 460mmx130mm
11
12921
1174.65
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
14
5412
386.63
providing and fixing in positon SS GRATING with frame of approved make (to the approval of engineer in charge) complete in all respect
35
4080
116.58
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
6500
73970
11.38
Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball
-
-
-
Brass Ball Cock with rod and Plastic Ball 25mm i/d
5
4754
950.98
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25mm i/d
3
596
198.82
G.I. tank nipple 40mm i/d
2
754
377.1
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
-
-
-
For 500 ltr Water Tank
1
3072
3072.01
For 1000 ltr Water Tank
2
8331
4165.54
For 2000 ltr Water Tank
2
11565
5782.66
Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.
-
-
-
Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing
complete in all respect.
25 litre capacity water heater
2
18648
9324.06
Flooring and Wall Tile
-
-
-
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
97.65
41458
424.56
Extra Rate for First Floor
40.76
128
3.16
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand)
97.65
112853
1155.69
Extra Rate for First Floor
40.76
128
3.16
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
97.65
51525
527.65
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the
manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry
@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
314.1
263068
837.53
Extra Rate for First Floor
160.79
508
3.16
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
3.31
11430
3453.37
Extra Rate for First Floor
2.88
9
3.16
Extra labour for projected nosing of stair case of any shape and design
6.55
441
67.42
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
9
9121
1013.47
Drinking Water Cooler & water dispensors
-
-
-
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer Detail as per Annexure-3
2
75181
37590.99
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable-capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable-nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable-size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable-capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2 KVA
2
7705
3852.65
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
2
26739
13369.97
Air conditioning works
-
-
-
Providing & Installing & Erection split type wall mounted air conditioner capacity 1.5 tonne 2 Star Make:- Toshiba, Mitsubishi Electric, Daikin, O' General, Hitachi with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
1
67150
67150
Providing & Installing & Erection split type wall mounted air conditioner capacity 2.0 tonne 3 Star Make:- Toshiba, Mitsubishi Electric, Daikin, O' General, Hitachi with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
13
1083394
83338
Providing laying hard soft copper concealing of copper pipes of dia 12.7mm od (insulation = 13mm)/9.5mm od (insulation = 13m) as per requirement and wall thickness 0.8mm, insulated, 4mm electric wire sheathed 3 core double insulated / taping laying in ch
75
63150
842
Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.
uPVC Pipe 6 Kgf/cm2
40mm i/d
75
17336
231.15
Fire fighting
-
-
-
Providing laying,testing and commissioning of C class heavy duty MS Pipe conforming to Indian Standard IS:1239/3589 including fittinge like elbows,tees,flanges,tapers,nutts,gaskets,nuts, bolts etc. on surface providing angle iron support or cement concrete block as support including painting with two or more coats of synethetic enamel paint or required shades complete in all respects.
-
-
-
100mm
215
326359
1517.95
80mm
37
38693
1045.77
25mm
18
5651
313.96
Hydrant landing Valve
-
-
-
S/I/T/C of GM single headed hydrant valve with instantaneous Gun metal peet coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 with blank gunmetal cap and chain including orifice olate made of 6mm stainless steel to keep the pressure not more than 3.5 per sqcm at any point complete in all respects.
12
81414
6784.58
Branch Pipe
-
-
-
S/I/T/C 63mm dia gun-metal branch pipe ISI marked with 20mm size gun metal nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.
12
24569
2047.45
Fire Brigade Inlet
-
-
-
Providing and fixing fire brigade inlet connection of cast iron body with gun metal 63mm dia instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904.
-
-
-
Two way inlet connection
3
19719
6573.08
RRL Hose Reel
-
-
-
S/I/T/C of RRL fire hose type A IS:636, 63mm diax15m long with gunmetal male and female couplings bound and riveted to hose pipes with copper rivets and copper wire as required.
24
113066
4711.09
First-Aid Hose Reel
-
-
-
S/I/T/C of First-Aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 mtr long type with main pipe complete in all respect.
9
85788
9532.07
Pressure Switch
-
-
-
Providing fixing testing & Pressure Switch in the M.S. Pipe Line including connection etc. as required.
1
3799
3799.27
Pressure Guage
-
-
-
providing and fixing of Pressure Guage in M.S Pipe Line (pressure range 0-10 Kg/cm2) suitable.
-
-
-
Dia diameter 150mm calibration 0-16kg.
1
1082
1082.59
Butterfly Valve
-
-
-
Supply, laying, Testing and Commissioning of ISI marked Butter Fly Valve tested for minimum Pressure of 16 kg/cm complete with rubber insertion, nuts bolts and washers, matching Flanges of required Thickness etc. complete as per specification.
-
-
-
100mm
5
17155
3431.04
80mm
3
8110
2703.42
Non-Return Valve
-
-
-
NON RETURN VALVE-providing & fixing dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines including jointing & cost of Nut bolt, rubber insertion etc. complete.
-
-
-
100mm
5
23442
4688.58
Cable
-
-
-
Supply, laying and erection of aluminium conuctor XLPE insulated PVC sheakthed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1 mtr below ground level including excavation, sand cushioning, covering with sand and first class bricks and back filling the trench etc., of the required size as per PWD General specifications; 16sq.mm (4core) armoured
60
25474
424.57
Air Valve
-
-
-
Providing and fixing of single air valve ISI markedas per IS-14845including jointing cost of nut, bolt and rubber insertion all carriage complete. 25mm
1
1851
1851.62
MS Box
-
-
-
S/I/T/C of weather proof cabinet for hose box fabricated out of 1.6mm thickness M.S sheet with front glass door having ocking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc.
-
-
-
600mm wide x 600mm high x 300mm deep size (inner)
13
56215
4324.3
Main Pump
-
-
-
Providing and fixing of Kirloskar make pump in back pull out design having 50 mm suction, 32 mm delivery, CI casing, bronze impeller and CS shaft with gland packing arrangement on common baseplate to Kirloskar or equivalent make, 2900 RPM TEFC sq. cage induction motor suitable for 3phase, 415V, 50 Hz AC supply confirming to through suitable flexible coupling. The pump set is suitable for following duties: 900 LPM at 30mtr head.
1
66424
66424
Hydrant Panel
-
-
-
Providing and fixing of Electrical Control Panel of cubical Type floor Mounted having MCB 50A 3P 10KA, Contractors MNX 32a, Relay 14-23-A, Add on block 2No+2NC, SP MCB 6, SPPR Relay 415V AC Digital Meter Set, Hardware, Aluminium Bus Bar Set, Wire and Thimble, Complete in all respect.
1
46376
46376
GM Ball Valve
-
-
-
Providing, fixing and joining Brass Ball valves screwed with SS/BRASS ball and spindle and Teflon seats, on G.I. Pipe lines including all carriages complete. 25mm.
-
-
-
25mm
9
5089
565.55
50mm
1
1796
1796.24
Fire Extinguisher ABC 6 Kg
-
-
-
providing and fixing of fire extinguisher ABC type of 6kg capacity
40
117612
2940.31
Fire Extinguisher CO24.5 kg
-
-
-
providing and fixing of fire extinguisher Co2 type of 4.5kg capacity
43
307457
7150.18
Water Tank
-
-
-
providing and fixing in positionon terrace HDPE water storage tanks of apporoved make with cover with suitable locking arranment and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank
10000
113700
11.37
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 40mm i/d
2
715
357.95
Providing and fixing in position automatic brass Ball Cock in tanks.
-
-
-
Plastic Ball Cock with rod and Plastic Ball
-
-
-
25mm i/d
2
1338
669.13
Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
-
-
-
25mm i/d G.I. Union
2
380
190.38
40mm i/d G.I. Union
2
651
325.66
Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
-
-
-
25mm i/d Gun Metal peet valve heavy pattern.
1
772
772.96
40mm i/d Gun Metal peet valve heavy pattern.
1
1564
1564.53
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.
-
-
-
40mm i/d
25
16476
659.07
Foundation work for 2 Nos. 5000 ltr capacity fire water tanks having dia 1.75 mtr and fire pumps and as par the satisfaction of engineer in charge at site. (at Terrace i.e. on 3rd Floor)
1
15000
15000
Core cutting up to 150 mm of each slab. (as per analysis attached)
5
16750
3350
Cranes 35 tonnes for lifting from Ground floor to sixth floor (for Triple layer water tank on Terrace)
1
3611
3611
Providing Internal Electrical Installations
-
-
-
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
-
-
-
Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring fan point (With fan box)
295
357011
1210.21
Wiring light point
803
612263
762.47
Wiring call-bell point
9
6696
744.03
Wiring 6Amp. wall socket point
491
303894
618.93
Wiring 6Amp. Plug control comprising wall socket point
54
20053
371.36
Wiring 16/20Amp. power plug control point
66
31549
478.03
Wiring light point with double control switches.
12
15913
1326.09
SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
-
-
-
Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), MS saddle clamp, PVC Circular junction Boxes (Four way 1½" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required:-
-
-
-
Wiring light point
4
2844
711.11
Wiring 6Amp. wall socket point
4
2470
617.61
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
13
10748
826.79
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).
28
19822
707.95
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring Telephone socket point RJ11 (one module)
31
11012
355.24
Wiring Networking socket point RJ45 (one module)
33
15227
461.43
PVC INSULATED FR COPPER CONDUCTOR CABLES:
-
-
-
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
Overall size 1.5sq.mm (Un-sheathed)
2284
56300
24.65
Overall size 2.5sq.mm (Un-sheathed)
3945
145886
36.98
Overall size 4sq.mm (Un-sheathed)
554
29589
53.41
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
2000
141600
70.8
Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)
16
2053
128.32
MINIATURE CIRCUIT BREAKERS:
-
-
-
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
MCB Single Pole 6-32amp. (10kA, Curve-C)
344
65559
190.58
MCB Double Pole 40amp. (10kA, Curve-C)
2
1578
789.33
MCB Triple Pole 50, 63amp. (10kA, Curve-C)
10
13255
1325.51
MCB Four Pole 50, 63amp. (10kA, Curve-C)
17
29762
1750.76
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:
-
-
-
Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
SP&N Double Door Distribution Board 8 way each
3
4248
1416.27
TP&N Horizontal Double Door Distribution Board 6 way each
5
17960
3592.17
TP&N Horizontal Double Door Distribution Board 8 way each
10
42888
4288.8
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
-
-
-
TP&N Double Door Vertical DB's 4 way each (With provision of upto FP MCCB 125amp.)
2
15277
7638.67
TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB 200-250amp.)
1
15923
15923.07
XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):
-
-
-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
-
-
-
Overall size 10sq.mm (2Core) Un-armoured (On-Surface)
417
39539
94.82
Overall size 16sq.mm (4Core) Un-armoured (On-Surface)
35
5300
151.44
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):
-
-
-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
Overall size 10sq.mm (2 Core) Un-armoured (Loose)
40
3055
76.38
Overall size 35sq.mm (3½ Core) Un-armoured (Loose)
210
42865
204.12
Overall size 50sq.mm (3½ Core) Un-armoured (Loose)
120
31921
266.01
Overall size 120sq.mm (3½ Core) Un-armoured (Loose)
700
410207
586.01
Overall size 300sq.mm (3½ Core) Un-armoured (Loose)
70
94854
1355.06
Overall size 16sq.mm (4 Core) Un-armoured (Loose)
650
85598
131.69
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
-
-
-
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)
510
68232
133.79
Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)
310
48335
155.92
Double Walled Corrugated HDPE Pipe 90/ 76mm (Outer/ Inner dia.)
680
135394
199.11
Double Walled Corrugated HDPE Pipe 160/ 136mm (Outer/ Inner dia.)
60
20479
341.33
COPPER EARTHING:
-
-
-
8 SWG COPPER EARTHING :
-
-
-
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
16
178309
11144.34
COPPER EARTHING STRIP (As Additional Length):
-
-
-
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)
356
116038
325.95
COPPER EARTHING:
-
-
-
COPPER EARTHING (Upto 14 metre in Length):
-
-
-
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
8
149307
18663.38
Earthing with 25mm x 3mm Copper Tape (upto 14Metre in Length)
2
40642
20321.17
COPPER EARTHING STRIP (As Additional Length):
-
-
-
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
-
-
-
Additional Length 20mm x 3mm thick Copper Tape
100
51769
517.69
Additional Length 25mm x 3mm thick Copper Tape
30
19114
637.16
SMC GLASS FIBRE INSPECTION BOXES:
-
-
-
Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirming to IS:14772, (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement complete in all respect as approved and desired by the Engineer In-Charge at site:-
-
-
-
SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 300mm x 200mm x 105mm with hinged water tight cover with locking arrangement
16
17614
1100.91
SHEET METAL IRON CLAD SWITCHES:
-
-
-
Supply and erection of sheet metal Iron Clad Switches on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications:-
-
-
-
ICDP Switch 32amp., 415volts
1
1646
1646.94
SUPPLY AND ERECTION OF WIRING ACCESSORIES:
-
-
-
Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-
-
-
-
Call Bell 220/230 volts AC Ding Dong
9
1188
132.06
LT PANELS & MCCB's (MOULDED CASE CIRCUIT BREAKERS):
-
-
-
LT PANELS:
-
-
-
Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).
Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel.
-
-
-
The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc.
-
-
-
The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.
-
-
-
Painting:- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work . Busbars:-The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.
-
-
-
Metering:-The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:-
-
-
-
LT Panel enclosure having space for 1No. Incomer MCCB 250Amp. and 8Nos. outgoing MCCB's 40amp. to 100amp. according to the requirement at site (Approx. size 1575 x 1700 x 400mm)
1
110807
110807.29
LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 8Nos. outgoing MCCB's 40amp. to 160amp. according to the requirement at site (Approx. size 1750 x 1750 x 400mm)
1
128637
128637.3
ON LOAD CHANGEOVER SWITCH
-
-
-
ON LOAD CHANGEOVER SWITCH (Sheet Enclosure):
-
-
-
Supply and erection of On Load Change over Switch with advance neutral UNIT in sheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-
-
-
-
On Load Change Over Switch Four Pole 63amp., 415volts (With Sheet Enclosure)
1
6502
6502.83
On Load Change Over Switch Four Pole 160amp., 415volts (With Sheet Enclosure)
1
12959
12959.95
MCCB's (FOR PANELS & SHEET ENCLOSURE):
-
-
-
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
11
85191
7744.7
MCCB Four Pole 125amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
4
37368
9342.02
MCCB Four Pole 250amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
4
61503
15375.83
MCCB Four Pole 400amp., 415volts, ≥36kA Microprocessor Based Adjustable Thermal and Magnetic Setting
1
35251
35251.58
HEAVY GAUGE WELDED CONDUIT PIPES:
-
-
-
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan.
63
8296
131.69
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
364
273364
751
Supply and erection of LED batten 36/40 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
345
367770
1066
Supply and erection of Recessed Mounted 36 Watt LED 2x2 panel (including constant LED driver) with CRCA sheet having efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
53
197266
3722
Supply and erection of AC Ceiling Fan 1200mm (48") BEE 3 Star Rating suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer-in-charge at site.
295
1038400
3520
Supply and erection of Heavy duty Exhust Fans 300mm sweep 900RPM complete with aluminium louver shutter Canon Make, double ball bearing, longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
46
222916
4846
Supply and erection of Heavy duty Exhust Fans 375/ 380mm sweep 900RPM complete with aluminium louver shutter Canon Make, double ball bearing, longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
6
33780
5630
Supply and erection of LED Flood Light 120watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
16
163648
10228
Supply and Erection of LED Bulk Head 9/10 Watt Surface mounted Pressure Die Cast Aluminium body (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
4
3980
995
Providing Campus Lighting/ Security Lighting
-
-
-
GI PIPE POLES:
-
-
-
Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required:-
-
-
-
G.I. Pipe Pole 6.1 metre Long, Dia. 80mm, Planting Depth 120cm with Pit Depth 135cm.
55
333389
6061.63
SINGLE ARM BRACKETS FOR GI PIPE POLE:
-
-
-
Supply and erection of G.I. Pipe 40mm dia. (A-class) Single arm bracket of suitable length give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the top of the GI pipe pole having top outer dia. 80mm/100mm with GI reducer of suitable size with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site:-
-
-
-
Single Arm Bracket 1 metre Long with G.I. Reducer 80mm x 40mm
55
66813
1214.79
GALVANIZED IRON PIPES AND G.I. EARTHING
-
-
-
Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:-
-
-
-
GI Earth rod 20 mm dia., 3 mtr. Long
55
70110
1274.74
CEMENT CONCRETE MUFFS:
-
-
-
Making of cement concrete muff of overall size 450mmdia., suitable length (15cm below ground level) with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole/ GI pipe pole. The outer surface of the muff shall be finished with 1:2 cement plaster with two coats of white snowcem complete in all respect as approved and desired by the Engineer in-Charge at site:-
-
-
-
Cement Concrete Muff of Overall Size 450mm dia., 60cm long
55
29029
527.8
PVC INSULATED FR COPPER CONDUCTOR CABLES:
-
-
-
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
Overall size 1.5sq.mm (Un-sheathed)
990
24403
24.65
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):
-
-
-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
Overall size 16sq.mm (4Core) Un-armoured (Loose)
1450
190950
131.69
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
-
-
-
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)
1130
151182
133.79
Supply and erection of LED Street Light 45watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED (with wattage 1 to 5 Watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
55
239470
4354
Supply and Erection of LED Post top 40/45 watt Opal Diffuser Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
2
13866
6933
LAN (Data Cabling and Computer Networking)
-
-
-
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
900
63720
70.8
Supply & Erection of CAT 6 UTP networking cable 4 pair support up-to 10/100/1000 mbps speed PVC insulated including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1410
60630
43
Supply & erection of CAT 6 ONE Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
63
14679
233
Supply & erection of CAT 6 TWO Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
63
17136
272
Supply & erection of CAT 6 24 Port Fully loaded Patch Panel, Rack Mountable for cable termination including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
8
77768
9721
Supply & erection of 9U Wall mount 19’’ Rack with glass door, lock & key facility 450mm-550mm depth. with CPD, Cable Manager & Fan including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
3
31497
10499
Supply & erection of 6U Wall mount 19’’ Rack with glass door, lock & key facility 450mm-550mm depth. with CPD, Cable Manager & Fan including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
5
40830
8166
Supply & Erection of 24 Port 10/100/1000 Mbps Smart Managed Data switch having IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, Switching capacity 16 Gbps, HOL blocking prevention, 802.1p priority based, hardware queues, priority queuing and Weighted Round-Robin (WRR) Jumbo frame. Port Web managed 10/100/1000 Mbps Smart Data switch with 2 Combo 10/100/1000 Mbps copper & SFP Port including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
3
94491
31497
Supply & Erection of 8 Port 10/100/1000 Mbps Smart Managed Data switch having IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, Switching capacity 16 Gbps, HOL blocking prevention, 802.1p priority based, hardware queues, priority queuing and Weighted Round-Robin (WRR) Jumbo frame. Port Web managed 10/100/1000 Mbps Smart Data switch with 2 Combo 10/100/1000 Mbps copper & SFP Port including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
4
57548
14387
Supply & Erection of 16 Port 10/100/1000 Mbps Smart Managed Data switch having IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, Switching capacity 16 Gbps, HOL blocking prevention, 802.1p priority based, hardware queues, priority queuing and Weighted Round-Robin (WRR) Jumbo frame. Port Web managed 10/100/1000 Mbps Smart Data switch with 2 Combo 10/100/1000 Mbps copper & SFP Port including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
2
44252
22126
Supply & erection of 600VA LIT sine wave UPS/ Power Plant with SMF batteries having 30 Minutes backup time including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
8
38888
4861
Supply & erection of 45mm x 45 mm Cable Management Tray slotted Gray Colour ISI marked PVC on wall surface including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
13
3536
272
Supply & erection of 6 Core Optical Fiber Cable of 10/100/1000/10000 Mbps DCC in existing PVC conduit including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
500
32000
64
Supply & erection of Fiber Termination Box with SFP Module TX-RX Type, Single Mode, LC-LC type Fiber Patch cord, LC Type Fiber Pig Tail including Fiber Splicing including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
8
59104
7388
Providing Digital Hybrid IP-PBX System
-
-
-
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
775
54870
70.8
Supply & Erection of Digital Hybrid IP-EPABX Configured for 04 Trunk Ports, 04 Digital Extn Ports, 00 GSM Trunk Ports, 00 PRI of 32 Channels, 80 Normal Extensions Ports and Expendable to 240 Digital IP-PBX System 100% Non Blocking, 12 No. Universal Slots, Universal SMPS, Auto Attendant, CLI, GSM Trunk, Digital Extension & IP Connectivity, Voice Mail, PRI Connectivity including all features listed in Product Boucher, Expendable to 240 TDM Ports & 999 IP Extensions.Make& Model: Matrix Eternity GENXTDM Ports & 999 IP Extensions including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
221361
221361
Supply & Erection of 100 Pair MDF+100 Pair IDF with Original Krone Module lock & key facility including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
21755
21755
Supply & Erection of 10 Pair DB with Original Krone Module lock & key facility including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
7
18431
2633
Supply & Erection of 20 Pair DB with Original Krone Module lock & key facility including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
3196
3196
Supply & erection of Beetel Basic Phone with CLIP and display including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
24
19608
817
Supply & erection of Featured Wired Telephone with Large Backlit Display, Redial, CLIP, 2 Way Speaker, Calculator, Alarm & Mute Compatible with EPABX System Without Addition Programming including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
7
8267
1181
Supply & erection of 02 Pair 0.5mm PVC Dual sheathed Telephone Cable manufactured as per ITD Specification with Up to amendments including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1010
23230
23
Supply & erection of 05 Pair 0.5mm PVC Dual sheathed Telephone Cable manufactured as per ITD Specification with Up to amendments including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
50
2550
51
Supply & erection of 20 Pair 0.5mm PVC Dual sheathed Telephone Cable manufactured as per ITD Specification with Up to amendments including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
50
8750
175
Supply & erection of 10 Pair 0.5mm PVC Dual sheathed Telephone Cable manufactured as per ITD Specification with Up to amendments including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
50
4850
97
Supply & Erection of Operator-cum-maintenance console with Small Backlit Display, 16 Direct Dialling Keys, HD sound quality, Duplex Speaker Phone, Touch sense keys including all features listed in Product Boucher including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
14272
14272
Supply & Erection of 1KVA LIT sine wave UPS/ Power Plant with SMF batteries having one hour backup time including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
12859
12859
Supply & erection of 10 Pair 0.5mm PIJF Jelly Field Telephone Cable manufactured as per ITD Specification with Up to amendments including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
500
68000
136
Providing CCTV System
-
-
-
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
1925
136290
70.8
Supply & Erection of IP Bullet CAMERA 5MP IP Camera with Audio Support and following features:-Technology True day / night DNR, Smart IR DNR, Smart IR Up to 30m IR distance IP67 weatherproof, PoE support, 4mm Fixed lens, Trip Wire, Quad Stream, Web View, NAS storage 12V optional Supply, 4 x4 inches Camera mounting Box, BIS certified, Intrusion Detection, IP conflict Detection Sony Sensor including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
24
301632
12568
Supply & Erection of IP DOME CAMERA 5MP IP Camera with Audio Support and following features:-Technology True day / night DNR, Smart IR DNR, Smart IR Up to 30m IR distance IP67 weatherproof, PoE support, 4mm Fixed lens, Trip Wire, Quad Stream, Web View, NAS storage, 12V optional Supply, 4 x4 inches Camera mounting Box, BIS certified, Intrusion Detection IP, conflict Detection Sony Sensor including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
53
645275
12175
Supply & Erection of 64 Channel IP INPUT 12MP NVR 4K having following features:-
● H.265 Decoding
● Four-stream video compression Support ● UHD-IP cameras ● Adaptive access ● 4 HDD Slots
● Full 12MP resolution real-time recording
● HDMI 2.0
● ONVIF,
● 2 No. Gigabit Ports,
● 256 Mpbs Uplink and 256 Mbps local Decoding
● Mobile View
● LAN View ● Playback at 1080P resolution up to 8-ch synchronous including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
106039
106039
Supply & Erection of 16 Channel IP INPUT 12MP NVR 4K having following features:-
● H.265 Decoding
● Four-stream video compression Support ● UHD-IP cameras ● Adaptive access ● Full 12MP resolution real-time recording
● HDMI 2.0
● ONVIF,
● 2 No. Gigabit Ports,
● 256 Mpbs Uplink and 256 Mbps local Decoding
● Mobile View
● LAN View ● Playback at 1080P resolution up to 8-ch synchronous including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
2
54984
27492
Supply & Erection of 6000GB Audio Video HDD for NVR recording and playback including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
6
91902
15317
Supply & Erection of 8 Port POE 120+ Watts Hardware managed 10/100/1000 Mbps Data switch with 2 Combo 10/100/1000 Mbps copper Port/ SFP Port including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
10
106040
10604
Supply & Erection of 43” LED Commercial Panel with 1 HDMI Port, VGA Input including warrenty and service for three years complete in all respect as desired by the engineer in charge at site.
2
98970
49485
Supply & Erection of 65” LED Commercial Panel with 2 HDMI Port, VGA Input including warrenty and service for three years complete in all respect as desired by the engineer in charge at site.
1
95828
95828
Supply & Erection of 2 meter long superior quality HDMI Cable including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
3
1884
628
Supply & Erection of RJ-45 Male connector including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
210
4200
20
Supply & Erection of 9U Wall mount 19’’ Rack with glass door, lock & key facility 400mm depth with CPD, Cable Manager & Fan including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
8
91112
11389
Supply & erection of 1KVA LIT Sine wave UPS/ Power Plant with SMF batteries having thirty minutes backup time including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
8
106200
13275
Supply & Erection of CAT6 UTP Networking Cable of 10/100/1000Mbps DCC in existing PVC conduit including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
3000
129000
43
Providing Fire Alarm System and PA System
-
-
-
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
1225
86730
70.8
PVC INSULATED FR COPPER CONDUCTOR CABLES:
-
-
-
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
Overall size 1.5sq.mm (Un-sheathed)
2800
69020
24.65
Supply & Erection of 08 Zone Conventional MAIN Fire Alarm Panel with following feature:-
● Operates on 230 V AC, 50 Hz AC supply
● Battery backup with built in charger
● Battery backup with built in charger ● Fire / fault status in unambiguous colour LED indications. ● 16 x 2 line dot matrix LCD display ● Zone wise fire, open, short LED indications.
● External s/w to test each zone fire, open, short status manually.
● External s/w for reset, Silence, Lamp test.
● Zone isolation facility with loop voltage cut off.
● Mains on, System On, Charger on, visual indications.
● Battery Low& Common fire indications ● Public Address system with built in amplifier
● Repeater Connectivity
● Attachable with all types of fire detectors.
PA Amplifier with min 3 inputs and 2 outputs and wires mic, Min 50 watt capacity including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
76837
76837
Supply & Erection of 04 Zone Conventional MAIN Fire Alarm Panel with following feature:-
● Operates on 230 V AC, 50 Hz AC supply
● Battery backup with built in charger
● Battery backup with built in charger ● Fire / fault status in unambiguous colour LED indications. ● 16 x 2 line dot matrix LCD display ● Zone wise fire, open, short LED indications.
● External s/w to test each zone fire, open, short status manually.
● External s/w for reset, Silence, Lamp test.
● Zone isolation facility with loop voltage cut off.
● Mains on, System On, Charger on, visual indications.
● Battery Low& Common fire indications ● Public Address system with built in amplifier
● Repeater Connectivity
● Attachable with all types of fire detectors.
PA Amplifier with min 3 inputs and 2 outputs and wires mic, Min 50 watt capacity including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
2
118678
59339
Supply & Erection of 4 Zone SUB Fire Alarm Panel with following feature:-
● Operates on 230 V AC, 50 Hz AC supply
● Battery backup with built in charger
● Battery backup with built in charger ● Fire / fault status in unambiguous colour LED indications. ● 16 x 2 line dot matrix LCD display ● Zone wise fire, open, short LED indications.
● External s/w to test each zone fire, open, short status manually.
● External s/w for reset, Silence, Lamp test.
● Zone isolation facility with loop voltage cut off.
● Mains on, System On, Charger on, visual indications.
● Battery Low& Common fire indications ● Attachable with all types of fire detectors. including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
6
121320
20220
Supply & Erection of Photoelectric Smoke Detector, low current draw, wide operating voltage, LED detector status indicator, Programmable sensitivity, automatic drift compensation Tested and approved to EN54-7:2000 including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
109
211024
1936
Supply & Erection of Heat Detector, low current draw, wide operating voltage, LED detector status indicator, Programmable sensitivity, automatic drift compensation Tested and approved to EN54-7:2000 including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
132
286440
2170
Supply & Erection of Response Indicator in polymer box having 2 LED to glow and voltage current of 24v/5ma including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
57
17727
311
Supply & Erection of Glass Break Manual Call Point including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
17
17850
1050
Supply & erection of Electrical hooter with strobe operational with DC 24 Volts, sounder output 80 db @ 1 meter and 2 core wiring supports PA System complete in all respect as desired by the engineer in charge at site including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
26
50544
1944
Supply, Erection, Testing and Successful Commissioning of Diesel Generating Set 58.5KVA for Admin and Academic Block, Diesel Generating Set 58.5KVA for Hostel Block and Diesel Generating Set 10 KVA for Mess Block
-
-
-
Supply, Erection, Testing and Commissioning of Water Cooled Silent DG Set 58.5KVA with Manual Control Panel, Three Phase, 415Volts, 50Hz, 1500 RPM Silent (Sound Proof) Diesel Generator Set. It should be Water cooled naturally aspirated/ turbo charged/ turbo charged after cool (As per manufacturer standard). ENGINE: The Diesel engine developing suitable BHP for giving a power rating as per ISO 8528- Part-1 (With CPCB-IV Norms) in KVA at the load terminals of alternator at 1500 rpm at actual site conditions. The engine shall confirm to IS 10000/ ISO 3046/ BS: 649/ BS 5514 amended up to date have dynamically balanced Fly wheel, air cleaner (dry/ oil bath type) as per manufacturer standard. A electronic governor of TYPE A1 AND A2 to maintain engine speed at all conditions of load, daily fuel service tank of minimum 8 hours running capacity as per manufacturer standard, Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level.suitable self-starter for 24 V DC, battery charging alternator unit and voltage regulator, Lubrication oil cooler,Lubrication oil filters with replaceable elements.
2
1774630
887315
ENGINE CONTROL PANEL: Engine control panel fitted and having digital display i.e Start/stop key switch/push button, Battery charging indication,Engine Hours indications, Over speed indication, High water temperature indication, Lubricant oil pressure indication,) RPM indication.
ALTERNATOR: The alternator should be designed as per (IS4722 and IEC:34 ) standard. Rated Power Factor : 0.8 (lag), Rated voltage : 230/415 volt, SPDP (Screen Protected Drip Proof), Degree of protection: IP-23, Ventilation : Self ventilated air cooled
-
-
-
Alternator should have 40 degree maximum class H insulation, Automatic voltage regulator unit should be provided as per standard practice of manufacturer. Its voltage dip shall not exceed more than 20% of the rated voltage at any step load or transient load as per ISO 8528 (Part-1). Its efficiency at full load 0.8 power factor, 10% overload one hour in every 12 hrs of continuous use.
ACOUSTIC ENCLOSURE: The enclosure shall be fabricated out the CRCA sheet of thickness not less than 1.6 mm on the outside cover with inside cover having not less than 0.6 mm thick perforated powder coated CRCA sheet. It should be IP54 Suitable for outdoor installation exposed to weather conditions, noise level up to 75 dB (A). All sheet metal parts should be processed through 7-tank pre treatment process and batteries accommodated in the battery rack .The acoustic lining should be made up of high quality insulation material i.e. Rockwool / glass/ mineral wool / PU foam of appropriate thickness & density for sound absorption.The inside of enclosure should be provided with at least one no. 28 W-T5 fluorescent tube light/ LED 10Watt luminaries controlled by a 5A switch for adequate lighting during servicing etc.
-
-
-
MANUAL CONTROL PANEL: Manual control panel shall be fabricated out of 1.6 mm sheet steel, totally enclosed, dust, damp and vermin proof wall mounted/ free standing floor mounted type with IP-53 degree of protection & front operated, composite meter for digital display, HRC fuses of suitable rating. MCCB (Fixed Thermal and Adjustable Thermal protection)/ ACB (Over cuurent/ overload, shorcircuit, instantenous, earth fault protection) should be used. Battery charger complete with voltage regulator, Voltmeter and Ammeter for charging the battery from external mains. This will be in addition to the battery charging alternator or dynamo fitted on the engine.All the components in the control panel shall be properly mounted, duly wired and labeled. Suitable terminals are to be provided for panel incoming and outgoing connections. System opeartion facility provided shall afford the following operational requirements. Necessary instruments and accessories such as voltmeter, power factor meter, KW meter, KWH meter, Ammeter, Frequency meter,battery charger complete in all respect as desired by engineer at site.
-
-
-
Making Reniforced Cement Concrete Foundation of size 3500mmX1800mmX650mm for DG set 58.5 KVA with Manual Control Panel with 200mm below ground level and 450mm above ground level. The foundation includes Earth work in excavation in foundations trenches etc., Cement Concrete 1:4:8 with stone ballast, Shuttering for faces of concrete fouundations and foundations beam & plinth beam, Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator, Cold twisted deformed (Ribbed/tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works including bending and placing in position complete and finished with 12.5 mm thick cement plaster 1:5. Includes also Bolt and nuts of all sizes and length required and Cost of Shed with angle iron / MS Channel & Fiber sheet completer in all respect as per site requirement to cover the DG Set
2
86916
43458
Supply, Erection, Testing and Commissioning of Water Cooled Silent DG Set 10KVA with Manual Control Panel, Three Phase, 415Volts, 50Hz, 1500 RPM Silent (Sound Proof) Diesel Generator Set. It should be Water cooled naturally aspirated/ turbo charged/ turbo charged after cool (As per manufacturer standard). ENGINE: The Diesel engine developing suitable BHP for giving a power rating as per ISO 8528- Part-1 (With CPCB-IV Norms) in KVA at the load terminals of alternator at 1500 rpm at actual site conditions. The engine shall confirm to IS 10000/ ISO 3046/ BS: 649/ BS 5514 amended up to date have dynamically balanced Fly wheel, air cleaner (dry/ oil bath type) as per manufacturer standard. A electronic governor of TYPE A1 AND A2 to maintain engine speed at all conditions of load, daily fuel service tank of minimum 8 hours running capacity as per manufacturer standard, Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level.suitable self-starter for 24 V DC, battery charging alternator unit and voltage regulator, Lubrication oil cooler,Lubrication oil filters with replaceable elements.
1
391230
391230
ENGINE CONTROL PANEL: Engine control panel fitted and having digital display i.e Start/stop key switch/push button, Battery charging indication,Engine Hours indications, Over speed indication, High water temperature indication, Lubricant oil pressure indication,) RPM indication.
ALTERNATOR: The alternator should be designed as per (IS4722 and IEC:34 ) standard. Rated Power Factor : 0.8 (lag), Rated voltage : 230/415 volt, SPDP (Screen Protected Drip Proof), Degree of protection: IP-23, Ventilation : Self ventilated air cooled
-
-
-
Alternator should have 40 degree maximum class H insulation, Automatic voltage regulator unit should be provided as per standard practice of manufacturer. Its voltage dip shall not exceed more than 20% of the rated voltage at any step load or transient load as per ISO 8528 (Part-1). Its efficiency at full load 0.8 power factor, 10% overload one hour in every 12 hrs of continuous use.
ACOUSTIC ENCLOSURE: The enclosure shall be fabricated out the CRCA sheet of thickness not less than 1.6 mm on the outside cover with inside cover having not less than 0.6 mm thick perforated powder coated CRCA sheet. It should be IP54 Suitable for outdoor installation exposed to weather conditions, noise level up to 75 dB (A). All sheet metal parts should be processed through 7-tank pre treatment process and batteries accommodated in the battery rack .The acoustic lining should be made up of high quality insulation material i.e. Rockwool / glass/ mineral wool / PU foam of appropriate thickness & density for sound absorption.The inside of enclosure should be provided with at least one no. 28 W-T5 fluorescent tube light/ LED 10Watt luminaries controlled by a 5A switch for adequate lighting during servicing etc.
-
-
-
MANUAL CONTROL PANEL: Manual control panel shall be fabricated out of 1.6 mm sheet steel, totally enclosed, dust, damp and vermin proof wall mounted/ free standing floor mounted type with IP-53 degree of protection & front operated, composite meter for digital display, HRC fuses of suitable rating. MCCB (Fixed Thermal and Adjustable Thermal protection)/ ACB (Over cuurent/ overload, shorcircuit, instantenous, earth fault protection) should be used. Battery charger complete with voltage regulator, Voltmeter and Ammeter for charging the battery from external mains. This will be in addition to the battery charging alternator or dynamo fitted on the engine.All the components in the control panel shall be properly mounted, duly wired and labeled. Suitable terminals are to be provided for panel incoming and outgoing connections. System opeartion facility provided shall afford the following operational requirements. Necessary instruments and accessories such as voltmeter, power factor meter, KW meter, KWH meter, Ammeter, Frequency meter,battery charger complete in all respect as desired by engineer at site.
-
-
-
Making Reniforced Cement Concrete Foundation of size 2500mmX1500mmX650mm for DG set 10 KVA with Manual Control Panel with 200mm below ground level and 450mm above ground level. The foundation includes Earth work in excavation in foundations trenches etc., Cement Concrete 1:4:8 with stone ballast, Shuttering for faces of concrete fouundations and foundations beam & plinth beam, Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator, Cold twisted deformed (Ribbed/tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works including bending and placing in position complete and finished with 12.5 mm thick cement plaster 1:5. Includes also Bolt and nuts of all sizes and length required and Cost of Shed with angle iron / MS Channel & Fiber sheet completer in all respect as per site requirement to cover the DG Set
1
30036
30036
Supply of Diesel to Start and Testing of DG Set
150
13236
88.24
XLPE INSULATED UNARMOURED CABLES (LOOSE):
-
-
-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
Overall size 16sq.mm (4 Core) Un-armoured (Loose)
40
5267
131.69
Overall size 70sq.mm (3½ Core) Un-armoured (Loose)
20
7374
368.73
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
-
-
-
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)
30
4013
133.79
Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)
10
1559
155.92
COPPER EARTHING:
-
-
-
COPPER EARTHING (Upto 14 metre in Length):
-
-
-
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
4
74651
18662.75
COPPER EARTHING STRIP (As Additional Length):
-
-
-
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
-
-
-
Additional Length 20mm x 3mm thick Copper Tape
40
20707
517.69
COPPER EARTHING:
-
-
-
8 SWG COPPER EARTHING :
-
-
-
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
2
22288
11144.34
COPPER EARTHING STRIP (As Additional Length):
-
-
-
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)
40
13038
325.95
Providing 1No. Lift 13 Passenger 3 Stops for Hostel Block
-
-
-
Supply, Installation, Testing and Commissioning of 13 Passengers Lift Machine Room Less.
Type and Capacity : Approximately 884 Kg, 13 Passengers Speed: 1.0 Meter per second Type of drive: AC Variable Voltage Variable Frequency with 16-Bit Microprocessor. Motor: Permanent Magnet Gearless Machine to be hoisted on the top of guide rail within the elevator hoist way Travel: Approximately 8.0meter (Ground floor to 2nd floor) Serving: 3 Floors 3 Stops 3 Openings 3 Levels (All on the same side) Hoist way : 2050mm (Wide) x 2500mm (Deep) Clear dimensions Headroom Height (HR): 4000 mm beyond finished floor level of last landing Pit Depth : 1600mm below the finish floor level of first landing Car Size Area: Minimum 2.06 Sq meter Car Enclosure : Constructed out of stainless steel finish panel in Scratch Resistance/ Vandal proof Car Entrance: Center Opening Automatic Doors in Stainless Steel Panels in hairline Finish Scratch Resistance/ Vandal proof with Vision Panel (Upto 40% area should be visible by glass) having a clear opening of 900mm (wide) x 2000mm (high) and contrasting in colour from the adjoining wall.There should be no difference in level between the lift door and the floor surface at each level. The gap between the lift door and building floor should not be more than 12 mm.
1
2019798
2019798
Hoist way Entrance: Ground to Second Panel Center opening Automatic Door's of Stainless steel finish panel in Scratch Resistance/ Vandal proof with provision of emergency key opening at landings with a clear opening of 900mm (wide) x 2000mm (high) Door operation : Automatic DC Door operation with adjustable door opening and closing timings Control: Simplex full selective collective control with and without attentdent Operation: Automatic Power Supply: 415 Volts, 3- phase, 50Hz Alternating Current Flooring: Floor Skid - Resistant as per standard Fan: Blower Fan in Car for ventilation with Auto cut off Lighting: LED for Car Lighting Indicators: LED Dot matrix / Digital 3 segement direction and position indicators in the car and at all landings Hand Rail: Stainless Steel round Hand rail not less than 600mm long at 900mm above floor level (Side LH,Side RH & Rear)
-
-
-
Call Button Height: Call button (Outside the lift) placed at a height between 800mm-1meter from the floor level and have a clear floor space minimum 900mmX1200mm
Control Panel Height: Control panel placed at a height between 800mm-1meter from the floor level with no obstruction placed to prevent a wheelchair user from reaching it and have buttons with Braille/raised letters and in sharp contrast from the background to aid people with visual impairments
Lift Signage: Signs indicating the location of an accessible lift should be provided in a location that is clearly visible form the building enterence. The sign should incorporate representation of the International Symbol for Access. A Sign indicating the number of the floor should be provided on each lift landing on the wall opposite the lift. It is also recommended to install a floor directory of the main facilities and services available on the lift landing, along with an accessible emergency egress route that clearly indicates the location of nearest refuge areas for Persons with Disabilities.
Audio and Visual Indicators: The lift should have a voice announcement system along with a visual display to indicate the floor level and also the information that the door of the cage is open or closed for enterence or exit.The announcement system should be clearly audible.e. the announcement should be 50 decibel.
Free service One years after the S/I/T/C work and all std. Govt. features
-
-
-
Other Features : 1. Battery operated emergency light with rechargeable battery 2. Battery operated emergency alarm with rechargeable battery 3. Adjustable Guide shoes 4. Micro movement LED based buttons 5. Door Open and Close buttons 6. Emergency Intercom provided inside the elevator 7. Emergency Intercom usable without the voice communication 8. Load weighing device with overload bypass feature and Overload function with Audio Visual Indication 9. Steel items, door frames sill angle's, fascia plates, spring buffers 10. Automatic phase reversal device and Phase Failure protection 11. Call registration 12. Audio & Video System installted in the lift indicating arrival at a floor 13. Manual break lever 14. Additional car gate lock
-
-
-
15. Automatic break testing infrared safety curten 16. Braille Buttons (Inside and outside) with Braille instructions for the communication system 17. Kick plate/Skirting 18. Lift anoucement system to announce floor level's in english language only and indication of door for entrance / exit is either Open or Close. 19. Car Operating Panel 20. Car plateform constructed out of cold rolled grain oreinted formed sheets of steel 21. Phase two device fire man drive 22. Fire Man switch at main lobby 23. Car false ceiling in stainless steel 24. Pit ladder 25. Anti Nuisance car call protection 26. Door Nudging
-
-
-
27. Automated Resuce Device to bring the elevator to the nearest landing in case of power failure.
28 The use of visually and acoustically reflective wall surfaces should be minimized within the lift car as visual reflections can cause discomfort and affect the visual acuity of people with impairments.
29 The floor of the lift car should be slip resistant and have similar frictional qualitites to the floor of the lift landing to decrease the risk of stumbling.
30 The provision of a mirror on the wall of the lift car opposite the lift door is a positive aid to navigation for wheelchair users. It allows the wheelchair user to see if anyone is behind them and also to see the floor indicator panel. The mirror should not extend below 900 mm from the lift door to avoid confusing people with impaired sight.
31 The emergency communication system should be coupled with an induction loop system installed all around the lift. Telephone units, where provided, should have an inbuilt inductive coupler to assist persons using hearing aids. 8 passenger lift to be provided, which allows easy maneuverability of wheelchair user.
-
-
-
XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):
-
-
-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
-
-
-
Overall size 16sq.mm (4Core) Un-armoured (On-Surface)
25
3786
151.44
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):
-
-
-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
Overall size 16sq.mm (4 Core) Un-armoured (Loose)
5
658
131.69
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
-
-
-
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)
3
401
133.79
COPPER EARTHING:
-
-
-
8 SWG COPPER EARTHING :
-
-
-
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
2
22288
11144.34
COPPER EARTHING STRIP (As Additional Length):
-
-
-
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)
40
13038
325.95
Providing Early Streamer Emission Lightning Arrestor System
-
-
-
Supply, Erection, Testing & Commisioning of Early Streamer Emission (ESE) type Lightning Protection Complete with Lightning Air Terminal. The System should be corrosion resistant stainless steel chrome body capable of working in hazardous atmosphere and protecting against direct LIGHTNING point as well conducting /diverting it to earth completely after tracing the LIGHTNING in advance.As per NF C 17-102:2011 the air terminal should be tested for LIGHTNING impulse current (10/350 micro sec)=100 KA and for local certification the air terminal should be tested for switching impulse current of 40 KA (8/20 micro sec) as per CPRI with 5 positive and 5 negative impulse. The ESE Terminals shall offer a protection radius of 107mtr High Protection and preferably to be mounted on roof top and center of the building / blocks with the highly insulated polyplastic adaptor with the Mast. Protection radius of 79 meter at Level 1 & 107 meter at level 4 complete in all respects as approved and desired by the Engineer-in-charge of the work.
1
75937
75937
Supply and fixing of GI Mast 5 mtr height along with suitable base plate for mounting the terminal along with highly insulated adopter to mount ESE Air Terminal with the Mast.The Adapter shall have suitable Metal connector / Connecting point in such a way the top portion shall be electrically connected to the central tip of the ESE terminal and bottom portion connected to the down conductor, stray wires along with support shall be securely fixed with base plate and gauge wires where ever required complete in all respects as approved and desired by the Engineer-in-charge of the work.
1
9997
9997
Supply and Installation of Lightning Strike Counter (minimum 6 digit display) of non-resettable (electromechanical) type which allows the automatic counting of the strikes received by the lightning protection system.This information is used to enhance lightning protection security & increase the effectiveness of inspection & maintenance procedures.It should be in IP-65 enclosure with minimum sensitivity of 1KA and maximum capacity 100KA. No external power source is required. It should be installed always 2 mtrs above the ground level complete in all respects as approved and desired by the Engineer-in-charge of the work.
1
9163
9163
Supply, Installation & Testing of Chemical Earthing (Maintenance Free Earthing) System with UL Approved Copper Bonded Rod and exothermically welded Cu Busbar both tested by CPRI at 50kA Fault Current. A Copper bonded steel rod shall have 3000 mm length and 17.2 mm dia. with copper bonding thickness of minimum 250 microns. Along with Earth enhancement compound tested by ROHS complying IEC 62561-7 in a sealed bag of minimum 50 kg (25 kg Bag x 2). A Copper clad steel solid ground wire of 8 mm dia. For interconnecting earth pits including earth pit covers is required.Each earth pit shall be covered with heavy duty weather proof environment friendly polyplastic earth pit chamber.The grounding minerals should not be pollute the ground water.The grounding minerals shall be tested & certified for the resistivity of less than 0.12ohm mtr complete in all respects as approved and desired by the Engineer-in-charge of the work.
3
24561
8187
Supply & erection of Test Link of non-corroding,weather proof, water proof polycarbonate IP 65/55 enclosure including providing of 2 nos. of insulated supports with suitable holes prefitted nuts & bolts to fix the down conductor & earth wire.The transparent cover fitted at approximately 500-1000mm from ground level shall be provided on each down conductor complete in all respects as approved and desired by the Engineer-in-charge of the work.
1
1776
1776
Cost of Pole Foundation with earth work in excavation in foundations trenches etc. 0.25 meter below ground level, Cement Concrete 1:4:8 with stone ballast, Reinforced cement concrete M-20, Cold twisted deformed (Ribbed/ tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008 complete in all respect as desired by engineer in charge.
4
12228
3057
Supply & erection of PVC insulated PVC sheathed Single Core Copper conductor (unarmoured) cable working voltage 1100volts grade 70sq.mm (1 Core) exists in pipe/ on surface on wall complete in all respects as approved and desired by the Engineer-in-charge.
120
84840
707
Providing Solar Power Generation System 17KW
-
-
-
Supply, Installation, testing & Commissioing of Grid interactive PV System Solar Power Plant (i.e connected to utility grid) of Minimum 17KW including required quantities of SPV modules (High power density Perc Monocrytalline based single module of capacity +400 watt) formed into arrays, their mounting arrangement, Power conditioning units (i.e String Solar Inverter), required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board through Cable tray, Bi Directional Energy Meter, Required Chemical Earthing with copper bonded rods (i.e. 1 No for GI Structure, 2 Nos. for String Inverter, AC & DC Distribution System), Provision of Lightening Arrestor & 2 Nos. chemical earthing with copper bonded rods. Hot dip galvanized MS Mounting Structures should be designed to withstand the speed for the wind Zone of the location (150 Km/hr-170 Km/hr) Complete in all respect with transportaion, fabrication, labour & Civil Work etc.
-
-
-
Features:- (1) Solar PV Module Warranty 25 Years & Certified Under IS/IEC 61730 I & II, IS/ IEC 61701 & IS/IEC 14286 & IES 61215, BIS Certificates and MNRE, GOI Latest Specifications/ Standards (2) Power Conditioning Unit (String Solar Inverter) & Certified under IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-3, IS/IEC 61683, EN 50530, IEC 60068-2-1, 2, 14, 30, EN 60529, IES 60947 Part I,II & III, IS 60947 Part I & II, IES 60227/ IS694, IES 60502/ IS1554/ BIS Standard and MNRE, GOI Latest Specifications/ Standards (3) Structure : 25 Years Service Life with AMC & Certified under IS 2062:2011
(4) Complete Plant Insurance for the period of 5 Years (Excluding Theft of the material) (5) Annual Maintenance Contarct for the period of 5 Years The Work will got done from approved MNRE (Ministry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency) PSPCL Contractors.
17
959871
56463
Heritage & Culture Cess @ 1.00%
276488695.64
2764886
1
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements