Public Works Department Tender

Supplying and installation of 2 Seater Sofa :- Dimensions W x H x D (cm)- 157 x 97.5 x 89• Understructure: Understructure of seat is made up of combination of pinewood members and 12mm thick Plywood. Pinewood are of cross sections 34x64mm, and 16x30mm without having major knots & defects on the surface Complete under structure of Seat is made by gluing, nailing & stapling, Non-woven fabric of 1O0GSM is stapled on the top surface after attaching Zig-Zag spring to cover the structure.• Foam: Foaming of seat is done with and 28kg/m* PU foam. A top layer of supemoft PU foam with density 32 kg/m^ is used to provide softness.. Armrest :• Understructure: Understructure of armrest is made up of combination of pinewood members,12mm thick Plywood. Pinewood are of cross sections 16X35mm without having major knots & defects on the surface.Complete undemtructure of Armrest is made by gluing, nailing & stapling.Rubber wood panel 18mm to be fitted just after the upholstery is done or before assembling the armrest • Foam: Foaming of Armrest is done with density 60kg/m^ and 28kg/m^ on all the outer surfaces in order to give definition to the form of armrest.Foam of 28kg/m* is used on the top surface of armrest• FACIA PANEL: Facia panel is having wood-stain matt finish. It is fitted to the armrest with the help of Velcro-strip.Backrest : (1 Seater, 2 Seater, 3 Seater)• Understructure: Understructure is made up of combination of pinewood members, 12mm THK Plywood, HDPE sheet at the rear side of the backrest at the bottom side of the Backrestear Pinewood are of cross sections 16x35, 22x64mm, 22x40mm without having major knots and defects on the surface. HDPE sheet is to be stapled on the rear side of backrest.• Foam: Backrest is made of PU foam with density 6Okg/m^ and 28kg/m* and 32kg/m3. Backrest Lumber foam is of 32kg/m covered with layer’s of recron sheet of 200gsm.. Cushion :(1 Seater, 2 Seater, 3 Seater)Backrest neck cushion are in the form of detachable pillows which are connected with the help of Velcro strip of (2 inch). Backrest cushion consist of 50mm thk 32density PU foam and wrapped with layer of 200gsm recron sheet.Upholstery:For color combination please fefer latest color chart as there are single-tone as well as dual-tone option for Leatherite fabric.Lee: ABS injection molded legs with (wood stain finish) sublimation process are fitted at the bottom surface of the sofa.Assembly: Upholstered seat ,backrest and armrest are integral part of each other and are connected to each other with MB baits, nuts & washer.Each packet of 1 seater consists of one complete upholstered sofa ,provided with 4 wooden legs. Each packet of 2 seater consists of one complete upholstered sofa ,provided with 4 wooden legs. Each packet of 3 seater consists of one complete upholstered sofa ,provided with 4 wooden legs.KnockDownconstruction.Height of Mattress Panel from Floor: 421 mmClearance from Floor: 13 mm.

Supplying and installation of 3 Seater Sofa :- Dimensions W x H x D (cm) - 202 x 97.5 x 89• Understructure: Understructure of seat is made up of combination of pinewood members and 12mm thick Plywood. Pinewood are of cross sections 34x64mm, and 16x30mm without having major knots & defects on the surface Complete understructure of Seat is made by gluing, nailing & stapling, Non-woven fabric of 1O0GSM is stapled on the top surface after attaching Zig-Zag spring to cover the structure.• Foam: Foaming of seat is done with and 28kg/m* PU foam. A top layer of supemoft PU foam with density 32 kg/m^ is used to provide softness. . Armrest :• Understructure: Understructure of armrest is made up of combination of pinewood members,12mm thick Plywood. Pinewood are of cross sections 16X35mm without having major knots & defects on the surface.Complete undemtructure of Armrest is made by gluing, nailing & stapling.Rubber wood panel 18mm to be fitted just after the upholstery is done or before assembling the armrest• Foam: Foaming of Armrest is done with density 60kg/m^ and 28kg/m^ on all the outer surfaces in order to give definition to the form of armrest.Foam of 28kg/m* is used on the top surface of armrest.• FACIA PANEL: Facia panel is having wood-stain matt finish. It is fitted to the armrest with the help of Velcro-strip.Backrest : (1 Seater, 2 Seater, 3 Seater)• Understructure: Understructure is made up of combination of pinewood members, 12mm THK Plywood, HDPE sheet at the rear side of the backrest at the bottom side of the backrest earPinewood are of cross sections 16x35, 22x64mm, 22x40mm without havingmajor knots and defects on the surface. HDPE sheet is to be stapled on the rear side of backrest.• Foam: Backrest is made of PU foam with density 6Okg/m^ and 28kg/m* and 32kg/m3. Backrest Lumber foam is of 32kg/m covered with layer’s of recron sheet of 200gsm.. Cushion :(1 Seater, 2 Seater, 3 Seater)Backrest neck cushion are in the form of detachable pillows which are connected with the help of Velcro strip of (2 inch). Backrest cushion consist of 50mm thk 32density PU foam and wrapped with layer of 200gsm recron sheet.Upholstery:For color combination please fefer latest color chart as there are single-tone as well as dual-tone option for Leatherite fabric.Lee: ABS injection molded legs with (wood stain finish) sublimation process are fitted at the bottom surface of the sofa.Assembly: Upholstered seat ,backrest and armrest are integral part of each other and are connected to each other with MB baits, nuts & washer.Each packet of 1 seater consists of one complete upholstered sofa ,provided with 4 wooden legs.Each packet of 2 seater consists of one complete upholstered sofa ,provided with 4 wooden legs. Each packet of 3 seater consists of one complete upholstered sofa ,provided with 4 wooden legs.

Supplying and installation of Centre table:- Dimension (mm) - overall - 1450*700*380 MATERIAL Top : Tampered Glass of 10 mm thickness Frame : Rubber wood in Walnut shade Side Panels : MDF • COATING : High Gloss PU • SHADE Glass Top : White MDF panel : White Frame : Walnut

Supplying and installation of Mattresses for bed Thickness: 10 cm / 12.5 cmAs intelligent as a mattress can get. A mix of different foams provides support and regularizes pressure points. Convoluted foam in the topmost layer maintains airflow and enhances the comfort level by giving a feeling of acupressure to the body. A bonded foam in the base provides direct support, while a layer of softy foam in (5” variant) the middle provides indirect support to the reclining body.

Supplying and installation of 10 seater Dinning table :- TABLE METERIALS & SIZE TOP SIZE: 2030X1070X45 LEG SIZE : 690X725X80 TOP MATERIAL : Block Board+Veneer LEG MATERIAL : Seesam Wood TOP Color : Leg Color : FINE WALNUT Veneer Type: Veneer Thickness : 5mm

Supplying and installation of Almirah :- Overall Size (W x H x D): Main Unit: 1000 X 1980 X 550 Height is excluding leveler Net weight: 98 kg Body: a] Aesthetically appealing plain, made from CRCA 0.8 mm. b) Hanging rod made of 1.0 mm thk MS ERW oblong tube having chrome plating & nickel plating. c] M10 screw type leveler with hex plastic base.Construction: Welded outer shell including hinges and ovedrriding shutters.Finish: All MS sheetmetal and metal frame components are powder coated with epoxypolyester powder to the thickness of 50 microns (±10 microns). Shutters having option of MS sheet and Precoated sheet Hardware: ·· Main shutter lock: 3 way 9 wafers barrel lock with wave type key,integrated with the handle. ·· Drawers: 4 digit numeric lock with cam stopper, integrated drawer pull and lock knob. ·· Hinges for skirting: Spring loaded self closing type with easy snap on fixing. ·· Bumpers for doors & drawer, screw and washer for fixing shelf. ·· Shelf supports for fixing shelfs.price :

Supplying and installation of Service Trolly wooden size 3'x2' and height 2' with malamine polish finishing

Supplying and installation of Air purifier make kent grand star model

Curtain rod 25mm dia aluminum pipe with brackets fixed in position including nails and screws etc.

Supplying and installation of curtain silk made complete in all aspect as per satisfaction of Engineer in Incharge

Supplying and placing of Bed Sheet maharaja size complete in all aspect as per satisfaction of Engineer in Incharge

Supplying and placing of Pillows complete in all aspect as per satisfaction of Engineer in Incharge