Public Works Department Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 2,21,341Document Cost
₹ 10,000Tender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEPW_135256_1Tender No
Tender Notice No.38 Dated 18.02.2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
12.86
5996
77111.65
... More
First class burnt brick laid in cement sand mortar 1:6 in superstructure
71.7
5712
409552.55
... More
12.5mm thick cement plaster 1:5.
415.45
190
79218.01
... More
20 mm thick cement plaster 1:5.
415.45
260
108104.24
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
116.73
560
65422.5
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
22.33
400
8939.37
... More
Extra for smooth surface
116.73
56
6542.72
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
59.98
221
13269.98
... More
Centering and shuttering for Columns Square or Rectangular
34.84
502
17507.8
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
23.22
6786
157579.51
... More
Base course of floor consisting of 100mm thick cement cocrete 1:8:16 with stone aggregate and 100mm sand filling. (Using mechanical mixer for mixing of material)
126.84
463
58776.39
... More
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top ofR.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
108.72
768
83527.4
... More
Cement concrete 1:2:4 gola 10 cm. x 10 cm. quardrant along junction of roof with parapet wall finished smooth, where specially specified.
42.99
70
3012.74
... More
Cold twisted deformed (ribbed/ tor steel) Bars Fe 500 grade as per IS 1786-2009 for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.
40.44
7875
318504.23
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required. (For fixed portion)
1219.7
370
452301.35
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required. (For Openable)
485.63
387
188273.89
... More
Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work.
1705.41
71
122175.57
... More
Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge. 6mm thick ACP Sheet
48.56
3281
159356.92
... More
Providing and Fixing Single Glazing with 6mm thick glass with high perfromance coating as per relevent codal provisions as per satisfaction of Engineer-in-Charge.
48.56
1675
81341.4
... More
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm
97.13
116
11358.38
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm
25
209
5241.25
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. II (size ofdoor 701mm to 850mm)
25
1210
30261.75
... More
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
9.41
10798
101612.76
... More
Dismantling glazed tiles (to be carefullyremoved).
314
133
42010.06
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones. ) Size 600 x 600 mm
422.72
1497
632820.29
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm.
422.72
186
78824.6
... More
Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge.
27.87
1079
30094.86
... More
Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
152.44
506
77245.41
... More
Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
58.94
2965
174773.6
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
231.56
898
208086.76
... More
Providing and fixing false ceiling at height upto 4 Mtr. with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size1912SUB HEAD : 26- N 15x42mm of length 3000 mm,cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
422.71
1714
724541.85
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
1470.7
84
123950.6
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
1470.7
79
116200.01
... More
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
621.5
145
90353.67
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure 4.0 kgf / cm²) conforming to IS : 4985, including fixing with M.S. clamps U-PVC pipes (working pressure 4.0 kgf. / sqcm) Pipe 110 mm dia.
60
265
15928.8
... More
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
4
142
568.88
... More
Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
4
88
353.96
... More
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
4
102
409.76
... More
Bottom Khurra on ground 1.2m x 0.6m Mtr. Consisting of brick on edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3.
4
719
2879.64
... More
Providing and fixing in position gratings 150mm x 150mm for gully trap. PVC grating (P.T.M.T.)
4
87
351.48
... More
Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below.
25
234
5873.25
... More
Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Windows of area 3 sqm and below
27
149
4039.2
... More
115 mm thick brick wall with every fourthcourse reinforced with hoop iron laid in 1:4 cement mortar in superstructure
37.6
774
29122.7
... More
Water proofing treatment of Roof Slab with High performance cementitious two component product, consisting of a powder component and an acrylic polymer using two coats ( Dr Fixit Roofseal flex - Packaging Size: 12 .5 kg (7.5 kg powder + 5 kg polymer) / equivalent water proofing Solution ). The slurry thus formed by mixing the two, is to be applied on new roofs to forms a seamless, highly elastic, non-toxic waterproofing layer on the roof with a life expectancy of 7 years. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge.
151.32
589
89127.48
... More
Disposal of Malba from stie to dummping ground
56.6
232
13172.52
... More
Credit of old Material
Door
25
-1000
-25000
... More
Windows
27
-2000
-54000
... More
Public Health
Providing and fixing in position set of EWC and WHB size 46x36 cm for Handicapped person of approved make (to the approval of the Engineer-in-charge) consisting of matching cistern, one pair mounting brackets, seat cover, one no. hinges rail 76cm and 4 no. grab rails 60cm complete in all respect and to the entire satisfaction of Engineer-in-charge.
1
67394
67394.5
... More
Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.
2
5607
11215.56
... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
5
5035
25178.65
... More
Providing and fixing jet spray with 2'-6" long PVC pipe.
With C.P. Brass nut
6
501
3008.8
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
Size 550 mm x 400 mm x 815 mm
7
3807
26651.44
... More
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
12
119
1428.55
... More
INTERNAL - EXPOSED ON WALL : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step PVC solvent cement and testing of pipes complete as per direction of Engineer-in Charge. SDR 11 CPVC pipes & fittings 16mm o/d
56
160
9014
... More
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
Single Socket Type B
110mm o/d SWR UPVC pipe lines laid complete
8
396
3169.27
... More
90mm o/d SWR UPVC pipe lines laid complete
13
344
4481.03
... More
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.
2
6901
13802.96
... More
Vitreous white Chinaware Partition
Large partition size 75 x 16.5 x 36.5 cm
1
4900
4900.88
... More
Providing & Fixing in position plastic moulded frame mirror Size 550mmx400mm with 4mm thick hard board backing of required shape fixed in position with rawl plugs, C.P. brass screws and washers complete in all respect
8
718
5747.9
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect.
Brass Nozel Bib cock 15mm x 250gm.
8
356
2848.66
... More
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.
C.P.brass 15mm Concealed stop cock with flange.
6
1268
7610.48
... More
C.P.brass 15mm Angle valve without flange
19
870
16533.63
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut
22
183
4032.8
... More
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.
15
116
1748.7
... More
Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete
46
889
40901.08
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
150
736
110459.48
... More
Provising & placing in postion on terrace (at all floor levels) HDPE water storge tanks of approved make (to the approved of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet,outlet and over flo pipes but without fitting and base support for tanks.
Triple Layer Tanks (1000 x 3 & 500 x 2)
4000
11
45511.2
... More
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
15mm i/d G.I. Union
3
95
287.61
... More
20mm i/d G.I. Union
6
158
953.4
... More
Providing and fixing PVC Cistern 10 Ltr. Capacity ISI marked IS 7231:1994( size 32.5x47.6x15.5 cm) of approved make(to the approval of the Engineer-in-charge) including PVC fittings complete.
6
1545
9272.91
... More
Providing, fixing and jointing gun-metal peet valves (Heavy Pattern) with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
20mm
5
592
2963.86
... More
25mm
5
814
4071.57
... More
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
C.P brass towel ring
7
959
6718.17
... More
Providing and fixing plastic hygenic seat cover with lid complete.
Plastic Seat Cover Premium star white/pastel/special colour
6
805
4835.57
... More
Cutting holes upto 23cm thorugh stone masonary or B.B. in cement walls for pipes, and making good including repainting, replastering and finishing according to existing finish where required
22.86cm thickness of wall
4
169
676.35
... More
Providing & Fixing in position automatic brass ball valves in tanks
Brass Ball Cock with rod and Plastic Ball
20mm i/d
5
604
3024.34
... More
Providing and fixing in position G.I tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC water storage tank complete in all respect.
G.I tank nipple 25mm i/d
15
198
2982.25
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal
2
10462
20924.62
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
3
1930
5790.04
... More
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
8
888
7104.8
... More
Providing and fixing brick masonry platform for storage tank.
5
2633
13168.75
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
46
424
19529.78
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.
Size 75 mm x 75 mm
14
72
1017.68
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
For 110mm o/d pipes
Single Tee
3
206
618.45
... More
Vent Cowls
2
45
90.79
... More
For 75mm o/d pipes
P Trap/Floor Trap 75mm x 75mm
7
206
1443.04
... More
Vent Cowls
2
31
62.85
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge) complete in all respect.
14
87
1224.17
... More
Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.
Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm
2
8154
16308.18
... More
Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Laboratory cock swan neck One Way
1
1422
1422.23
... More
Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
20
109
2191.28
... More
Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
103
113
11719.13
... More
Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. Eurpoean/Indian/Orissa W.C.,
5
230
1153.58
... More
PVC / China Ware Cistern
5
172
863.87
... More
Wash Hand Basin / Urinal Pot
7
114
803.82
... More
CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap
12
25
303.41
... More
Excavation manually in trenches with straight or open cutting in built up street/ lane having wall to wall width of street/ lane upto 3.0 metre, for intramural sullage drains, extramural intercepting drains and outfall drains, storm water channels and other work contingent or incident thereto, to full dimensions and depth as shown on the drawings or as shall be required by Engineer in-charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic. Providing and fixing and maintenance of caution boards, fencing, night signals, for leads upto 15m and for all lifts and subsequent refilling, watering and dressing upto groung level, including removal of surplus spoil from the site upto 15 metre distance complete in all respects. All classes of soil except rocky
24.3
180
4377.65
... More
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 110mm o/d pipe
30
599
17976.9
... More
Tibba Sand filling under Pipe Lines (Rate Already approved from DWSS)
24.3
450
10935
... More
External Water Supply
Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. Earth work upto 1.5 m. Depth
All classes of soil except rocky
13.2
178
2350.52
... More
INTERNAL - EXPOSED ON WALL : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step PVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
SDR 11 CPVC pipes & fittings 20mm o/d
20
191
3839.4
... More
ELECTRICAL WORKS
Providing Internal Electrical Installations: POINT WIRING
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring fan point (without fan box )
36
1091
39300.84
... More
Wiring light point
123
762
93783.89
... More
Wiring call-bell point
2
744
1488.06
... More
Wiring 6 Amp. wall socket point
49
618
30327.63
... More
Wiring 16/20 amp. power plug control point
22
478
10516.56
... More
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (NSR Rate)
Supply and Erection of Air Conditioner Point with 32A DP Switch, 2 Module Sheet and 2 Module Cover Plate with 16A Socket covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface). Complete in all respect as per satisfaction of engineer in charge at site.
12
700
8400
... More
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (NSR Rate)
Supply and Erection of Computer Point with 8 Module Sheet Metal Box and 8 Module Cover Plate with 2 Nos. 6A Switch Modular and 3 Nos. 6A Socket (Two Module) covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface). Complete in all respect as per satisfaction of engineer in charge at site.
15
550
8250
... More
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
Wiring Telephone socket point RJ11 (one module)
17
355
6039.08
... More
Wiring Networking socket point RJ45 (one module)
14
461
6460.02
... More
PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (Un-sheathed)
700
24
17256.33
... More
Overall size 2.5sq.mm (Un-sheathed)
600
36
22186.71
... More
Overall size 4sq.mm (Un-sheathed)
800
53
42728
... More
Overall size 6sq.mm (Un-sheathed)
200
73
14792
... More
Overall size 10sq.mm (Un-sheathed)
400
120
48208
... More
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan.
18
131
2370.42
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
1500
70
106192.8
... More
Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
500
97
48671.7
... More
Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)
200
128
25663.26
... More
SUB DISTRIBUTION SYSTEM:
MCB Single Pole 6-32amp. (10kA, Curve-C) MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
66
190
12578.28
... More
MCB Double Pole 40amp. (10kA, Curve-C)
3
789
2367.99
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
3
1750
5252.28
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
SP&N Double Door Distribution Board 12 way each
3
1797
5393.7
... More
TP&N Horizontal Double Door Distribution Board 4 way each
3
2914
8744.76
... More
CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
Cable Tray Size 150mm x 50mm x 50mm (2mm thick)
100
1066
106635
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
Overall size 35sq.mm (3½ Core) Un-armoured (Loose)
100
204
20411
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
Double walled corrugated (DWC) HDPE pipe 63/51 mm (outer/ inner dia.)
90
155
14032.8
... More
XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- (For Flood Lights)
Overall size 10sq.mm (2Core) Un-armoured (On-Surface)
120
94
11377.2
... More
INDOOR LT PANELS:
LT PANELS & MCCB's (MOULDED CASE CIRCUIT BREAKERS):
Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).
Fabrication: Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel.
The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.
Painting: The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work .
Busbars: The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.
Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc.
Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:-
LT Panel enclosure having space for 1No. Incomer MCCB 250Amp. and 6Nos. outgoing MCCB's 40amp. to 125amp. according to the requirement at site (Approx. size 1300 x 1650 x 400mm)
1
96259
96259.29
... More
MCCB's (FOR PANELS & SHEET ENCLOSURE): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
6
7744
46468.2
... More
MCCB Four Pole 250amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
15375
15375.83
... More
COPPER EARTHING :-
(Upto 14 metre in Length):-Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
2
18663
37326.76
... More
COPPER EARTHING STRIP (As Additional Length): Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
Additional Length 20mm x 3mm thick Copper Tap
40
517
20707.6
... More
Supply and erection of Copper Chemical Earthing with Copper Electrod 3 Meter long (Heavy Duty) 50MM dia with BFC 2 Bags. Complete in all respect as per satisfaction of engineer in charge at site.
3
6800
20400
... More
Supply and Erection of 3 Star Rating Ceiling fan Suitable size 48” (1200mm) Full Aluminium Body, 3 Nos. of Blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air delevery of 218 CMM. The rated speed of the product must be minimum of 350 revolutions per minute and 5 Nos. of speed. The approximate weight of the product should be 4kg and 180gms (without packing) or higher. The product should have a manufacturer's guarantee/ warranty of minimum 2 years. The product should be complete in all respects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fans having connection with PVC insulated PVC sheathed tow single core copper conductor (FR) cable 0.75 SQ MM. Complete in all respects as desired by the Engineer in charge of work at site. The Product should be BEE & BIS Certified.
36
3295
118620
... More
Supply and Erection of Wall fan Suitable size 16" (400mm) including connection & testing. Complete in all respects as desired by the Engineer in charge of work at site. BASIC FEATURES - Sweep size : 400 mm, No. of blades : 3, Adjustable upward and downward tilt mechanism: Yes, Guard : 120 Spokes, Motor speeds (No.) : 3, Motor type : Normal Speed, Oscillation : Yes, Oscillation degree : 60˚, Remote control option : No, Reversible blades : Yes, Switch : Yes, DESIGN FEATURES - Blade design : Aerodynamically designed & Blanced Blade, Blade finish : Transparent, Body colour : White, Finish : Glossy, Pull cord : Yes, DIMENSIONS AND WEIGHT - Packaging dimensions WxHxD : 46.8 cm x 20 cm x 46.8 cm, Weight : 3.3 kg, PERFORMANCE FEATURES - Rated Speed : 1350 revolution per minute, Air delivery : 72 m³/min, Noise level : 63.2 dB, POWER FEATURES - Power Consumption : 50 W, Rated frequency : 50 Hz, Rated Voltage : 230 V, SAFETY FEATURES - Motor protection through thermal overload protection device : Yes. The Product should be BEE & BIS Certified.
4
3180
12720
... More
Supply and Erection of Heavy Duty Exhaust Fan Suitable size 12” (300mm) including Louver shutter, connection & testing complete in all respects as desired by the Engineer in charge of work at site. Exhaust Fan, Blade Sweep : 300 mm (12”), Type of motor : Permanent capacitor induction motor, C75 Rated Voltage : 230 volts, 50 Hz, AC. single Phase, Test voltage : 230 volts, 50 Hz, .AC. I Phase, Frequency : 50 Hz., Capacitor rating : 1.0 F, 400V, 50 Hz, AC., Rated watts at full (load) speed & at 230V. : 27 watts., Current in amps at full speed & at 230 V. : 0.12 Amps., Power factor : 0.9 min., Rated full speed & at 230 V : 1310 rpm., Rated air delivery at 230 V : 800 M3/hr, Rated Service value : 30 m3/hr/watt, No. of blades leaves : Five, Type of blade leaf : Plastic (PP), No of running positions : One position, Class of Insulation : Class “E”, Type of bearings : Oil impregnated self aligned bush bearings.
7
4370
30590
... More
Supply and Erection of 50 Watt LED Flood Light fitting (including LED driver) with pressure die cast aluminium housing with control gear (IP 66 protection),THD 10%, CRI minimum 70, High power LED with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, efficacy of LED fixture minimum 120 lumens per watt, complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to CM Punjab vide letter No. AT-2021/GL 1410-1422 Dated 06/05/2021. Besides this the Lighting Fixture manufacturer should have inhouse NABL accredited LAB.
6
3970
23820
... More
Supply and Erection of 36 Watt 2X2 LED Recessed Mounted Panel light Fitting (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the Lighting Fixture manufacturer should have inhouse NABL accredited LAB.
60
3870
232200
... More
Supply and Erection of 18 Watt Round surface mounted LED Downlight with Pressure die cast aluminium housing & polycarbonate diffuser and efficacy of LED fixture minimum 100 lumens per watt complete in all respects as approved and desired by the Engineer in-charge at site. The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the Lighting Fixture manufacturer should have inhouse NABL accredited LAB.
54
1765
95310
... More
Providing Local Area Networking System SITC of Architecture & Performance Switch should have total 28 Nos. Gigabit port including 24 Nos. of 10/100/1000 Mbps Ethernet Ports and 4 Nos. of dual personality (SFP/GbE) ports The switch should be flexible enough to be managed through cloud and standalone mode. The cloud management should be inbuilt ready from day one. The Switch should have Non-blocking wire speed switch fabric The Switch should have Non-blocking wire speed switch fabric, should have Min. 56 Gbps Back plane or more and should have Min. 41 Mpps or more The Switch should support Min. 16K Mac address or more Should support EEE IEEE802.3az standard for minimise the power consumption on per port basis by supplying power on the basis of cable length and active ports only Should support Dual Software (firmware) image Should support the following Standard IEEE 802.3 10BASE-T Ethernet ,IEEE 802.3u 100BASE-TX Ethernet ,IEEE 802.ab 1000BASE-T Ethernet ,IEEE 802.3z 1000BASE-X Ethernet ,IEEE 802.3x flow control IEEE 802.1D spanning tree protocolIEEE 802.1w rapid spanning tree protocol ,IEEE 802.1s multiple spanning tree protocol IEEE 802.1p class of service, priority protocols ,IEEE 802.1X port authentication ,IEEE 802.3ad LACP aggregation Traffic Management and QoS Rate limiting: Rule-based/port-based bandwidth control, 64 kbps granularity Port-based egress traffic shaping Switch should support Jumbo frames of 9KB should support broadcast storm control to avoid unwanted traffic attack on CPU should support IEEE 802.1p with priority queues for different traffic types Supports IGMP/IGMP snooping v1, v2, v3 Should support congestion control on all ports Link Aggregation IEEE 802.3ad LACP link aggregation compliant Up to 8 aggregation groups, Resilient Network Should support IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) Should support IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Should support Multiple Rapid Spanning Tree Protocol User Security and Authentication should support MAC filtering per port secures access to each port should support IEEE 802.1Q tag-based and port-based VLAN Switch should support Protocol Based VLAN, IP subnet based, Guest VLAN and MVR Should support IEEE 802.1x based on guest vlan and MAC-based should support Layer 2 Protocol Tunneling(L2PT) should support GVRP, automatic VLAN member registration should support atleast 1K static VLAN, up to 4K dynamic VLAN should support Port-base VLAN & VLAN isolation should support limited MAC number per port Should be capable to set mac ageing time should support Loop guard to avoid loops in network generated on unmanaged switches should support RADIUS MAC login should support 802.1X port-based authentication, compensated assignment over VLAN and bandwidth for valid access Should support 802.1ab LLDP and MED Should support NTP , Syslog and DNS client Network Administration Security should support SSL Should support static and dynamic IP-MAC and Port binding for port security Should support DHCP snooping to set the authorised ports to communicate with DHCP servers Should support ARP inspection Should support AAA through Radius and Tacacs+ servers IPv6 Support IPv6 over Ethernet ,IPv6 Addressing, ICMPv6 ,DualStack ,Neighbor discovery Network Management Web-based management ,SNMP v1, v2c, v3 RMON four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events) for enhanced traffic management, monitoring and analysis Port mirroring: supports source/destination/both port mirroring Swith should be supplied with management software to manage and maintain multiple layer2 switches for Centralized and batch configurations like IP configurations, IP renew, Web Gui access, Firmware update, device locating etc. Should support sflow for traffice analysing Should support OAM and Connectivity fault management Should have Cluster Stacking to manage up to 24 switches by single IP address Intelligent ACL (L2/L3/L4 Access List Control) Based on MAC address , VLAN, IP address, Protocol, TCP/UDP type and DSCP Certification CE-LVD ,FCC, CE ,BSMI , RoHS Compliant The OEM Brand should be having valid ISO 9000, ISO 14000, all these cerificates must be submitted in technical bid. All switches and modules must be from the same OEM for better compatibility Environmental specifications Operating temperature 0 DegC to 50 Deg C Operating Humidity 10% to 95 % (Non condensing)
1
48120
48120
... More
Supply,laying and termination of CAT 6 Cable should be Unshielded twisted pair cabling system, TIA / EIA 568-C.2 Category 6 Cabling system.Conductors should be 23 AWG solid bare copper. Netowork support should be ultrahigh speed data networks such as Gigabit Ethernet (1000 Base-T and 1000 Base-TX) and beyond.Cable Should be ETL/UL Certificates are mandatory. Frequency tested up to should be 600 MHz minimum.Impedance should be 100 Ohms + / - 15 ohms.Box Packing shoud be 305M.Should be 25-year systems warranty; Warranty to cover Bandwidth of the specified and installed cabling system, and the installation costs. Site certificate Should be issued by OEM.Should be RoHS compliant.
250
46
11500
... More
Supply, Installation, Testing and Commissioning of Patch Panel should be made of cold rolled steel.Should conform to TIA / EIA 568-C.2 Component Compliant.Should terminate 24 UTP CAT 6 (4 pair) Cables.Should confirm to EIA/TIA 568A wiring Pattern.Each port Should be features the spring-loaded shutter. Should be prevents incomplete mating Should be protects from dust and contaminants.Should be Front and rear port labelling as well as panel identification label.Should be Integral cable management shelf ensures bend radius compliance.Operating Life should be minimum 750 insertion cycles.Should be RoHS compliant.
1
7585
7585
... More
Supply, Installation, Testing and Commissioning of Patch Cord 1 Mtr Patch cord Should be 4 Pairs 24 AWG copper cables.The Outer Jacket should be Low Smoke Zero Halogen.24 AWG stranded bare copper.Operating temperature range should be -20°C to 60°C.Should minimum comply with proposed ANSI/TIA/EIA-568-C.2.Should be verified by ETL (ETL certificate to be enclosed with the Bid) UL listed (UL certificate to be provided along with the Bid) Should Have cross separator.Standard length should be available 0.5M to 10M.Should be RoHS compliant.
24
170
4080
... More
Supply, Installation, Testing and Commissioning of Patch Cord 2 Mtr. Patch cord Should be 4 Pairs 24 AWG copper cables.The Outer Jacket should be Low Smoke Zero Halogen.24 AWG stranded bare copper.Operating temperature range should be -20°C to 60°C.Should minimum comply with proposed ANSI/TIA/EIA-568-C.2.Should be verified by ETL (ETL certificate to be enclosed with the Bid)UL listed (UL certificate to be provided along with the Bid)Should Have cross separator.Standard length should be available 0.5M to 10M. Should be RoHS compliant.
10
190
1900
... More
Supply, Installation, Testing and Commissioning of Cat-6 Information Outlet with Face Plate and Gang-box Face Plate. Category 6, EIA/TIA 568-C.2.Use insulation displacement connectors.All information outlets should be 22-24 AWG copper.Should have shutter on I/O to avoid dust.Should have Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent.Contact Plating: 50 µinches gold over 100 µinches nickel.Operating Life: Minimum 20 Re-terminations.Single Gang square plate, 86mmx86mm.Write on labels in transparent plastic window – supplied with plate.Should be RoHS compliant.
18
760
13680
... More
Supply, Installation, Testing and Comissioning of Wall Mount 15U x 600 W x 600 D , Front Glass Door (tinted, Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails with U-Marking , Welded Side Walls, Min Accessories : 1U Cable Manager (1), Hardware Packet (1 Pkt), 6 Socket 5 Amp. Power Distribution Unit (1 No), Roof Mounted Fan Unit / 90 CFM /230V AC. as per DIN 41494 Standards.
1
10860
10860
... More
Providing CCTV Cameras System
SITC of AI IP network indoor Face Detection Camera shall utilize high sensitivity 5-Megapixel CMOS sensors with 1/2.7 Sensor”, 5MP Progressive Scan CMOS Sensor and Active Pixel count Effective Pixels 2880(H)x1620(V). Minimum Illumination 0.004Lux @ (F1.6, AGC ON); 0 Lux with IR. Camera shall integrate automatic shutter, shutter time is (1/5s-1/20,000s Adjustable). Camera shall integrate 2.8mm Lens, with Angle of View: Horizontal: 110°, Vertical: 58°, Diagonal: 133°. Camera shall have IRIS Control: Fixed/Auto. Camera shall integrate IR cut filter with auto switch (Day/Night/Auto/Image/Schedule). IR distance shall be up to 30m. Camera shall have Output PAL/NTSC adjustable. Camera shall offer WDR up to 120dB, (Off/On, WDR coefficient range). Camera shall support to adjust Image Setting Brightness, Contrast, Sharpness, Saturation, Color and 3D DNR noise reduction. Camera shall offer BLC/HLC modes of backlight compensation. Camera shall support Automatic Gain Control, Automatic White Balance, Anti-Flicker, Mirror & Corridor mode. Camera shall have Digital Zoom feature. Smart Event. Camera shall offer intelligent analysis functions, Perimeter Intrusion Detection, Line crossing Detection, Human & Vehicle Detection, Stationary Object Detection, Cross Counting, Crowd Density detection, Queue Length, Rare Sound detection, Heat MAP, Face Detection. Camera shall support Motion Detection Support (8 level). Camera shall offer event Trigger Schedule Linkage: Capture, email, FTP upload. Audio & Video Encoding. Camera shall offer H.264 and H.265 Encoding image compression format. Camera shall offer the following resolution streams: Mainstream@30fps 5MP (2880x1620), 4MP (2560x1440), 3MP (2304x1296), 1080P(1920x1080), 720P(1280x720), Substream@30fps 720P (1280x720), VGA (640x480), QVGA (320x240), Third stream@30fps VGA (640x480), QVGA (320x240). Camera shall offer CBR/VBR bit rate control, bit rate is between 256kbps-8Mbps suitable for different image quality and fluency requirements. Network Function. Camera shall support the following protocols: TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP. shall conform to the ONVIF Profile S, G, T. Camera shall have IRIS Control: Fixed/Auto. Camera shall offer Up to 4 area privacy mask. Camera shall support setting Character Overlay (OSD) Title, time and date overlay. Camera shall support setting Unicast and Multicast Streaming. Camera shall support General Function like User Authentication, IP address filtering, Complicated password. Camera shall offer Built-In web server with an interactive Graphical User Interface. Camera shall support UPnP, ONVIF Discovery Interface. Interface. Camera shall integrate 1*RJ45 10M/100M Ethernet Port. Camera shall support Built-in-mic. Camera shall support standard 256G Micro SD card storage. General. Camera shall have Power Supply PoE(802.3af)/DC 12V±10% with Power Consumption 5W (IR ON), 3W (IR OFF). Camera shall offer IP67 Weather resistant Protection Complaint with IK10 for Vandal resistance. Operating Conditions shall be -35 °C ~ 60 °C Humidity 95% or less (non-condensing). Camera shall integrate 1 reset button.
4
21450
85800
... More
Supply, Installation, Testing & Commissioning of AI IP network 5MP Outdoor Face Detection Camera shall utilize high sensitivity 5-Megapixel CMOS sensors with 1/2.7 Sensor", 5MP Progressive Scan CMOS Sensor and Active Pixel count Effective Pixels 2880(H)x1620(V). Minimum Illumination 0.004Lux @ (F1.6, AGC ON); 0 Lux with IR. Camera shall integrate automatic shutter, shutter time is (1/5s-1/20,000s Adjustable). Camera shall integrate 3.6mm Lens, with Angle of View: Horizontal: 91°, Vertical: 46°, Diagonal: 110°. Camera shall have IRIS Control: Fixed/Auto. Camera shall integrate IR cut filter with auto switch (Day/Night/Auto/Image/Schedule). IR distance shall be up to 30m. Camera shall have Output PAL/NTSC adjustable. Camera shall offer WDR up to 120dB, (Off/On, WDR coefficient range). Camera shall support to adjust Image Setting Brightness, Contrast, Sharpness, Saturation, Color and 3D DNR noise reduction. Camera shall offer BLC/HLC modes of backlight compensation. Camera shall support Automatic Gain Control, Automatic White Balance, Anti-Flicker, Mirror & Corridor mode. Camera shall have Digital Zoom feature. Smart Event. Camera shall offer intelligent analysis functions, Perimeter Intrusion Detection, Line crossing Detection, Human & Vehicle Detection, Stationary Object Detection, Cross Counting, Crowd Density detection, Queue Length, Rare Sound detection, Heat MAP, Face Detection. Camera shall support Motion Detection Support (8 level). Camera shall offer event Trigger Schedule Linkage: Capture, email, FTP upload. Audio & Video Encoding. Camera shall offer H.264 and H.265 Encoding image compression format. Camera shall offer the following resolution streams: Mainstream@30fps 5MP (2880x1620), 4MP (2560x1440), 3MP (2304x1296), 1080P(1920x1080), 720P(1280x720), Substream@30fps 720P (1280x720), VGA (640x480), QVGA (320x240), Third stream@30fps VGA (640x480), QVGA (320x240). Camera shall offer CBR/VBR bit rate control, bit rate is between 256kbps-8Mbps suitable for different image quality and fluency requirements. Network Function. Camera shall support the following protocols: TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP. shall conform to the ONVIF Profile S, G, T. Camera shall have IRIS Control: Fixed/Auto. Camera shall offer Up to 4 area privacy mask. Camera shall support setting Character Overlay (OSD) Title, time and date overlay. Camera shall support setting Unicast and Multicast Streaming. Camera shall support General Function like User Authentication, IP address filtering, Complicated password. Camera shall offer Built-In web server with an interactive Graphical User Interface. Camera shall support UPnP, ONVIF Discovery Interface. Interface. Camera shall integrate 1*RJ45 10M/100M Ethernet Port. Camera shall support Built-in-mic. Camera shall support standard 256G Micro SD card storage. General. Camera shall have Power Supply PoE(802.3af)/DC 12V±10% with Power Consumption 5.5W (IR ON), 3W (IR OFF). Camera shall offer IP67 Weather resistant Protection Complaint with Metal Body. Operating Conditions shall be -35 °C ~ 60 °C Humidity 95% or less (non-condensing). Camera shall integrate 1 reset button.
5
23170
115850
... More
SITC of NVR shall have 16-channel video input. NVR shall be Embedded Linux. NVR shall support the following bandwidth - Incoming 112 Mbps and outgoing 96 Mbps. NVR shall support Video Output: HDMI (1 1024*768, 1280*720, 1280*1024, 1440*900, 1920*1080, 3840*2160/EDID), VGA (1024*768, 1280*720, 1280*1024, 1440*900, 1920*1080). NVR shall offer the following recording resolution streams Video Resolution: 8MP, 5MP, 3MP, 2MP(1080P), 1.3MP(960P), and 1.0MP(720P). NVR shall support Motion Detection. NVR shall support 4 zones of Privacy Mask. NVR shall offer intelligent analysis functions powered including Human and Vehicle Detection, Perimeter Intrusion Detection, Line Crossing Detection, Stationary Object Detection, Crossing Counting, Heat Map, Crowd Density Detection, Rare Sound detection (gunshot/baby crying/dog barking), Face Detection. NVR shall support G.711A/G.711U Audio compression. NVR shall integrate Audio input 1 CH RCA port. Video Recording and Playback. NVR shall have 2HDDs Slots. NVR shall support a 1-30fps Video Frame Rate. NVR shall have Record Mode: schedule, event-based - motion, I/O, PIR. NVR shall offer 16 CH max sync playback. NVR shall be able to playback according to different types, including Playback Mode Instant playback, Local video, and local image. NVR shall support Record Search Time, calendar, channel search, and event search, (ANR, regular video, motion detection video, alarm video, intelligent detection video). NVR shall support the following Video Playback: Start, stop, normal play, back play, frame-by-frame forward, full screen, Fast forward / backward (2x, 4x, 8x,16x), Slow forward (1/2x, 1/4x, 1/8x,1/16x), Add custom/Default Tag, digital zoom, video clip, sub-stream/main-stream, playback video bar, scale of 30 mins to 24 hrs. Storage and Backup. NVR shall offer USB mobile hard disk, U disk, and network backup Methods. NVR Should support FTP for uploading alarm video. NVR shall ANR Support Smart IPC (with SD card) ANR. Function. NVR shall support the following protocols: IPv4, IPv6, TCP/IP, HTTP, HTTPS, DDNS, RTMP, SMTP(SSL), SNMP, DHCP, PPPoE, UPnP, NTP, P2P, FTP, IP filter. NVR shall support ONVIF Profile S Support. NVR shall support ONVIF/RTSP/HTTP/HTTPS/RTMP port customized. NVR shall support Mobile Surveillance Support Apple, Android & Internet Explorer Support IE, Chrome, Firefox, and Safari. NVR shall have Digital Zoom support. NVR shall have IPC timing Manual/auto/timing/reconnect timing. shall support the following Event Actions: pre and post-recording, Sending an email, showing a message, sending an email, FTP upload video or screenshot, Cloud upload video or screenshot, full screen, voice prompts, Alarm output trigger, PTZ linkage. NVR Should support a combination of different events for effective alarm trigger and response. NVR Shall have exception alarms on event type of no space on disk, disk error, and video loss. NVR Shall be able to configure covert on camera by which recording is happening, but the live view is restricted. Network Detection monitoring, Utilization of total and used bandwidth, IP filter with blacklist and whitelist. Shall support video cover privacy mask both on live and recording up to 4 areas. NVR shall have User Management User add, delete, modify, permission management, and support. NVR Shall be able to trigger PTZ presets on any camera AI event. NVR shall support Security Mode authorized username and password, HTTPS with a password, and RTSP Validation. NVR should Manage IPC Support IPC centralized management, including IPC parameter configuration, information export and import, real-time information acquisition and upgrade. NVR shall have Statistics of events for face recognition, vehicle & and human, cross count, and heat map. Network Interface. NVR shall integrate 1 X RJ45 10M/100M/1000M adaptive Ethernet port. NVR shall integrate 1* RS485,& USB2.0*1(front) USB3.0*1+USB2.0*1(rear). General. The power consumption shall be 12V/2A and power Consumption ≤12W (Without HDD). Operation Temp./ Humidity -10°C ~ 55°C/10%-90%.
1
46000
46000
... More
Supply, Installation and Comissioning of Access Switch 24 10/100/1000BASE-T PoE and 4 100/1000 Mbps GbE/SFP combo ports, IEEE 802.3az Energy Efficient Ethernet (EEE),IEEE 802.3x Flow Control, IEEE 802.3af/at compliance (for PoE ports),9K Jumbo frame,256 Multicast Groups,802.1W RSTP, 802.1s MSTP, IGMP Snooping, Loopback Detection, 802.3ad Link Aggregation, Auto Surveillance VLAN, 802.1p Quality of Service with 8 queues per port,Supports 4 IP interfaces,Min 124 static route entries, Min 768 ACL Rules, SSH, TLS,DoS attack prevention, 802.1X Port-based Access Control, Port Security, Cable diagnostics, Dual image, Dual configuration, NMS Bundled along with Switch,OEM Should be present in Gartner Magic Quadrant from past 5 Years
1
46645
46645
... More
Supply Installation, Testing & commissioning of HDD Formatted capacity 6 TB surveillance ,Data transfer rate (max) Buffer to host Host to/from drive (sustained) 6 Gb/s 171 MB/s,Cache (MB) 64,Rotational speed (RPM) IntelliPower ,Load/unload cycles4 300,000,Non-recoverable read errors per bits read 1 in 1014, Operating (2 ms, read/write) 30, Operating (2 ms, read)65, Non-operating (2 ms)250, Average power requirements (W) Read/Write 5.90,Idle 4.90,Standby and Sleep 0.40 complete in all respects.
1
20485
20485
... More
Supply Installation, Testing & commissioning of Display : 55 inch, 4K (3,840 x 2,160), Direct LED, Professional Display with 4K Processor, Native Contrast ratio 1,200:1 or higher, Response time 12 ms or lower, Brightness 400 cd/m² or higher, 24/7, Portrait/Tilt functionality, HDMI Auto wake up, HTML5 platform, 16GB On Board Storage, HDMI*4 with HDCP 2.3 / RS232 / USB / RJ45 / Wi-Fi Direct / 20W Speakers / Android OS or similar, Viewing angle 178 degree, Apple AirPlay & Chromecast
1
67500
67500
... More
Supply Installation, Testing, commissioning & Laying of Cat 6 Cable in existing conduit Category 6 Unshielded Twisted Pair 23 AWG:305mtr. ,4 pair 100W cable shall be compliant with ANSI/TIA/EIA-568-C.2 Additional Transmission Performance Specifications for 4-pair 100W Category 6Cabling. Tested upto 600 MHZ; Construction: 4 twisted pairs separated by internal X shaped, 4 channel, polymer spine / full separator. Half shall not be accepted.Sheath : FRPVC/LSZH,Outer Diameter 6.1 mm nominal;Temperature Range -20° to +60°C.Manufacturer should have ISO 9001:2008 Certification for Quality Management System.Manufacturer should have ISO 14001:2004 Certification for Environmental Management System.All UTP and Its Components should be from same OEM.
305
46
14030
... More
Supply, Installation, Testing and Comissioning of Wall Mount 15U x 600 W x 600 D , Front Glass Door (tinted, Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails with U-Marking , Welded Side Walls, Min Accessories : 1U Cable Manager (1), Hardware Packet (1 Pkt), 6 Socket 5 Amp. Power Distribution Unit (1 No), Roof Mounted Fan Unit / 90 CFM /230V AC. as per DIN 41494 Standards.
1
10860
10860
... More
Supply Installation, Testing & commissioning of 6 Mtr HDMI Cable for NVR, UL Listed.
1
1590
1590
... More
Providing Fire Alarming System
Supply of Microprocessor based Multi-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event , 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure, Products not having this feature will offer Redundant CPU. Four access levels, flash EPROM, Panel should be capable to work 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall support with Integrated 8 channel Digital Voice Evacuation System Controller capable of broadcasting Evacuation Messages on same peer-to-peer Network and 2 ways Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. The panel shall be capable of self programing without any dependancy on dongle or programming software. Quoted rate shall include supply of necessary software & hardware for progamming the panel with all necessary licence. Panel shall have Modbus/ Bacnet over IP protocol for future integration with BMS. However, for present arrangement FA system will be standalone with 24x7 monitoring. The panel shall be capable for remote accessibility on a mobile app through cloud platform/solution. Designed to meet UL864, 10th The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
1
245555
245555
... More
Supply, Installation, Testing & Commissioning of Inbuilt automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition with the charging capacity of 200AH with Emergency evacuation Control Panel & Digital Voice command system with Battery Dress Panel. The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
1
47970
47970
... More
Supply, Installation, Testing & Commissioning of Paging Microphone compatible with Emergency evacuation Control Panel Project specific OEM authorization required for executing agency.
1
24375
24375
... More
Supply, installation ,testing & Commissioning of Addressable Smoke/Multi-criteria Photo-Thermal Detector and base with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Designed to meet UL268, 7th EditionThe solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
61
3655
222955
... More
Supply,installation ,testing & Commissioning of Reponse Indicator for up side of ceiling.
30
715
21450
... More
Supply,installation ,testing & Commissioning of Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device.
3
3985
11955
... More
Supply of Addressable Control Module for Sounders / Strobes / Sounder cum Strobes/ Telephone Jack. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
4
4110
16440
... More
supply of Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
1
4110
4110
... More
supply of Isolator Module for Isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
5
3435
17175
... More
Supplying, installing, testing and commissioning of Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
1
4275
4275
... More
Supplying, installing, testing and commissioning of Sounder cum Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashintg at 1 Hz for visual indication. UL Listed.The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
4
4875
19500
... More
Supply, Installation, Testing & Commissioning of Digital Audio Amplifier with cabinet & Amp power supply. Amplifier shall be capable of N:N/N:1 configuration and shall be dual channel capable of processing Two of 8 audio channels and a total of 100 W at 70.7 VRMS output along with necessary enclosures with local FFT Raiser. The Digital Audio Amplifier shall be fully monitored for fault and alarm reporting. The proposed Digital Audio Amplifiers shall (be Wall/Panel Mounted) not be rail mounted / dependant on Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of Amplifier operation. The Amplifiers shall be distributed across the building/floor to manage the sound attenuation problem & for the best sound intelligibility. All amplifiers shall provide back up of minimum 5 hours using secondary power source(battery power/UPS power). .The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
1
156495
156495
... More
Supply, Installation, Testing & Commissioning of Integrated 8 channel Digital Voice Evacuation System Controller capable of broadcasting Evacuation Messages on the same peer-to-peer Network and 2 ways Communication capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. Products not having this feature must provide dedicated CPU for DVC. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. The panel shall be capable of self programming without any dependency on dongle or programming software. Quoted rate shall include supply of necessary software & hardware for programming the panel with all necessary licence. Panel shall have Modbus/ Bacnet over IP protocol for future integration with BMS. However, for the present arrangement the FA system will be standalone with 24x7 monitoring. The panel shall be capable of remote accessibility on a mobile app through cloud platform/solution. Designed to meet UL864, 10th Edition. The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
1
245065
245065
... More
Supply, Installation, Testing & Commissioning of 2W Multi-Tap (0.25W; 0.5W; 1W; 2W), Ceiling Mount Speakers. The speakers shall be of the same make as that of the Control Panel & Amplifiers. They shall be compatible with supplied Amplifiers and shall work on 70.7Vrms. UL Listed. Project specific OEM authorization required for executing agency. .The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
35
2445
85575
... More
Supply, Installation, Testing & Commissionning of Back box for speaker as per site requirement
35
1070
37450
... More
supply of Providing & fixing of fire resistance cable(Colour Red) (at 950° C for 180 minutes) of BS6387/BS7846 Fire survival Cable for fire alarm & PA system, 2C X 1.5 sqmm, BS6387 & BS7846, annealed stranded copper conductor, mica fire resistant tape, XLPE insulated, low smoke & zero halogen (LSZH) bedding, galvanized steel wire armour, low smoke & zero halogen (LSZH) red outer sheath. 600/1000 volts. Fire resistant to IEC 331 & BS7846 F2/BS6387 & CWZ. Acid gas emission to BS EN 50267 (IEC60754), smoke emission to BS EN 50268 (IEC61034) and flame propagation to BS EN 50265, BS EN 50266 (IEC 60332-3).
200
200
40000
... More
Supply, Installation, Testing & Commissionning of ExiLED M ST LED LED based exit sign with dimming function, Reading distance, exit sign Two-sided 25m, Voltage 220-240VAC / 50-60Hz, Power consumption 3.3W / 3.5VA, Battery 3.6V/1.2Ah NiMH, Battery protection Over charge protection /deep discharge protection, Charging Time 16 hours, Battery back-up time 1 hour / 3 hours / 8 hours (from dip switch), Light source 15 LED, Approvals EN 60598-1, EN 60598-2-22, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3, Ambient temperature 5 to 40 °C, Humidity Up to 95%, IK rating IK09, IP rating IP40, Dimensions 265 x 53 x 222 mm, Weight 540 / 742 gr , Colour Anodized aluminum / black plastic, Materials Aluminum, Acrylic Plate, Mounting method Ceiling, wall bracket, suspended, pendulum, flag mount, Delivered as self-contained/auto test luminaire Choice of 1, 3 or 8 hour autonomy via DIP switch IP 40 – dustproof luminaire Reading distance upto 25 meters.High lumen output – 1h = 180lm / 3h = 110lm /8h = 40lm Technical lifetime of LED 100 000 hours , 4 Pictograms (left, right, down, up) are included in the luminaire ordering part code, The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
3
12095
36285
... More
Supply, Installation, Testing & Commissionning of AgoraLED NM LED IP65 230V 2X6W 1h/3h/8h. The luminiare comes in plastic housing. Mounting bracket is not required for this luminaire, IP65/NA 0 Non -Maintained Self Testing 12V / 7Ah Pb, LED based for anti-panic area, surface assembly Delivered as self-contained/auto test luminaire Choice of 1, 3 or 8 hour autonomy via DIP switch High lumen output – 1h = 360lm / 3h = 170lm / 8h = 70lm Simple and quick assembly and maintenance Technical lifetime of LED 100 000 hours • IP65 – dust and waterproof luminaire, Voltage 220-240VAC / 50-60Hz Power consumption 11.4W / 11.8VA Battery 12V / 7Ah Pb Battery protection Over charge protection /deep discharge protection Charging Time 23 hours, Battery back-up time 1 hour / 3 hours / 8 hours (from dip switch), Light source LED 2x6, Technical lifetime (light source) 100 000 hours, Lumen output, emergency (1h / 3h / 8h) 3200 / 1600 / 800 lm, Approvals EN 60598-1, EN 60598-2-22, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3, Ambient temperature 5 to 40 °C, Humidity Up to 95%, IP rating IP65, Dimensions 302 x 94 x 210 mm, Weight 4200 / 4420 gr, Materials PC/ABS, PC, Aluminium, Mounting method Wall mounting, The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.
2
40445
80890
... More
Supply, Installation, Testing & Commissionning of Online UPS 1 kva 800 Watts Tower UPS with 1 hour battery backup. Operating Temperature Range 0 to 40 Degree @ 100% Load @ 50 Degree with 50% Load,Storage Temperature -15°C~60°C, Relative Humidity 0-95% No condensates, Acoustic Noise 40 dBA @ 1 Meter, Cooling Forced air cooling by the internal fans, Input Socket IEC C13, Output Socket IEC C14, No of output sockets 3 No's, Rated Input Voltage 208/220/230/240 Vac, Maximum working input voltage range 160 to 300 Vac @ 100% Load, 100 to 300 Vac @ 50% Load, Input Power Factor 0.99, Input THDi% 5%, Generator Set Yes 1.5 x UPS Capacity, Rated kVA 1000 VA, Rated kW 800 Watts, Load type Resistive load/ lagging load/ non-linear load/ transformer load/ lighting load, Load power factor range 0.5~1 lagging, Load Crest Ratio 3:1, Online Efficiency 88%, Rated Battery Voltage 36 Vdc, Battery Type VRLA (Valve Regulated Lead Acid Battery), 12VDC, Battery backup Back UP : 936VAH, Maximum charging current 10 Amps, ECO Mode Available, Communication (Independent SCI) Available, Intelligent Card slot (Independent SCI) Available, OVCD Available, EPO Function Available, Intelligent Fans Speed control Available, Auto restart function Available, Cold start.
1
28760
28760
... More
Providing EPABX System:
Supply Installation Testing and Commissioning of the Switching system of the EPABX should be designed with IP at the core allowing fully distributed IP solutions across data networks in 19” Rack Mountable,7 universal slots in single Node and should support card Analog Extension Card , Digital Extension Card , for the respective addition / expansion. Analog & Digital extensions can be increased in the steps of 8, 16 & 32 Ports.Analog Trunks , PRI, BRI Trunks, E1 & SIP Trunks . Single card/module should support 2 or more PRIs, It should support 100% IP or 100 % TDM or a hybrid of IP/TDM technologies. The system should support IP Communication Devices (wired and wireless) e.g. IP Phones (Hard and Soft phones), Mobile IP Phones, multimedia PCs, SIP phones, Video phones (Hard & soft), etc.1.3. The system should also support Legacy TDM communication devices (Digital and analog 2 Wire telephone instruments with or without caller-id (Both FSK and DTMF), Fax, modems, ISDN phones etc. 1.6. The proposed system should support direct SIP integration with Microsoft Lync 2013 including following. Vendor should provide proper document towards certification with Microsoft Lync 2013 integration.1.16. makes ericcsion awaya aastra nortal mitel system should support at least 228 analog extensions in a single node and up to 600 analog Extensions in multiples nodes,at least 400 Digital Phones in a single node and 600 digital phones in multiple node,support at least 600 SIP extensions in a single node,Support 600 DECT/SIP DECT phones.support at least 224 DECT base stations and over 4000 SIP-DECT Base stations.should support minimum 56 Analog Trunks ,56 ISDN BRI trunks,14 PRI Trunks.Fax over IP with T.38 Interface and should support minimum 140 channels.240 SIP access channels.1.26. The system should have in-built Auto Attendant and Voice Mail system. The system should be communication server should be on Leaders of Gartner Magic Quadrant. The OEM should be present globally minimum 70-75 countries. EPABX/Server, Digital Phone, IP Phone, cloud server must be from same OEM. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 15 years experience with same OEM & have already maintained services minimum 18-20 EPABX system in Punjab region.
1
80034
80034
... More
Supply, Installation, Testing and Commissioning of 8 PNT Line card. Complete in all respect as per satisfaction of Engineer in Charge.
1
41013
41013
... More
Supply, Installation, Testing and Commissioning of 36 Analog extension card. Complete in all respect as per satisfaction of Engineer in Charge.
1
69746
69746
... More
Supply, Installation, Testing and Commissioning of Face Plate with IO for telephone. The stylish unloaded Synergy Wallplates were designed specifically to accept the UTP Datagate Connector. The unloaded Synergy Wallplates are available in 1, 2 and 4 port variants, in five colours, to co-ordinate with any decor and any installation size should be accomodates UTP, STP I/O.
17
495
8415
... More
Supply Installation Testing Commissioning of Analog phone with caller id and hand free facility.
12
1135
13620
... More
Supply Installation Testing Commissioning of 50 Pair MDF with Krone.
1
21455
21455
... More
SITC of unarmoured 2 Pair 0.5mm ABC conductor PVC insulated FRLS Cable for Telephones in existing Conduit.
200
30
6000
... More
Providing Solar Generation System:-
Supply, Installation, testing & Commissioing of Grid interactive PV System Solar Power Plant Monoperc half cut cells with 21% afficieny each Solar Panel Consist of 550 Watt and has 144 Cells (i.e connected to utility grid) of Minimum 50KWp including required quantities of SPV modules (High power density Perc Bifacial Monocrytalline based) formed into arrays, their mounting arrangement, Power conditioning units (i.e String Solar Inverter), required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board through Cable tray, Bi Directional Energy Meter, Required Earthing (i.e. 2 Nos.GI Strip Earthing for GI Structure, 2Nos. GI Strip Earthing for String Inverter, AC & DC Distribution System), ESE Stroke master (As per NFC 17 102 Standard with suitable radius of protection) & 3 Nos. chemical earthing with copper bonded rods along with high rise GPSP structure (Rated Wind Speed 170Kph) including mounting height upto 8 feet Complete with transportaion, fabrication, labour & Civil Work.
Features:- 1. Solar PV Module Warranty 25 Years & Certified Under IS/IEC 61730 I & II, IS/ IEC 61701 & IS/IEC 14286 & IES 61915, BIS Certificate and MNRE, GoI latest specifications and standards. 2. Power Conditioning Unit (String Solar Inverter) & Certified under IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-3, IEC 61683, EN 50530, IEC 60068-2-1, 2, 14, 30, EN 60529, IES 60974 part I and II, IS609&4 Part I*II, IES 60227/IE694, IES60502/IS1554/BIS Standard, MNRE, GoI latest specifications and Standards. 3. Structure : 25 Years Service Life with AMC & Certified under IS 2062:2011 4. Complete Plant Insurance for the period of 5 Years (Excluding Theft of the material) 5. Annual Maintenance Contarct for the period of 5 Years * The Work will got done from approved MNRE (Ministry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency) Contractors/ PWD enlisted contractors subject to the condition that PWD enlisted Contractor will get the work done from MNRE/ PEDA approved contractors. * The Plant will be installed as per MNRE and GoI guidlines and specifications (Details of Material attached) * The rates are inclusive of the Bi-directional meter testing charges, PSPCL Connections charges, unidirectional meter cost and all types of taxes including GST.
30
56463
1693890
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%