Public Works Department Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 25,44,713Document Cost
₹ 50,000Tender Fee
₹ 5,900
Summary
Construction Of 50 Bedded Critical Care Block (ccb) At Ayush Hospital At District Moga
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEPW_137313_1Tender No
EE Bid NO. 25 date 24.03.2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
867.32
6296
5461184.46
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
1734.47
221
383734.14
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
455.93
5266
2401077.84
... More
Damp proof course 4 cm thick of cement concrete 1 : 2 : 4 with 2 coats of bitument 20/30 penetration at 1.65 kg per Sqm. laid hot and sanded.
149.38
374
55868.12
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. BEAM
Total For All Floor
259.28
7086
1837452.54
... More
Columns (Rectangular & Square)
Total For All Floor
176.18
7086
1248543.62
... More
Extra Rate For First Floor
89.69
190
17102.09
... More
Extra Rate For Second Floor
7.7
381
2936.55
... More
Slab
Total For All Floor
440.64
7086
3122705.52
... More
Slab
Total For All Floor
50.21
7086
355825.72
... More
Extra Rate For First Floor
22.25
190
4242.63
... More
Extra Rate For Second Floor
8.56
381
3264.53
... More
Lintels
Total For All Floor
38.87
7086
275461.97
... More
Extra Rate For First Floor
19.36
190
3691.56
... More
Extra Rate For Second Floor
0.14
381
53.39
... More
Shelves
Total For All Floor
1.8
7086
12756.15
... More
Extra Rate For First Floor
0.64
190
122.04
... More
Fascia
Total For All Floor
33.12
7086
234713.16
... More
Extra Rate For First Floor
16.56
190
3157.66
... More
Extra Rate For Second Floor
16.56
381
6315.49
... More
Cement concrete 1:3:6 with stone ballast or shingle 20 mm guage. using concrete mixing volumetric type
Total For All Floor
22.64
4612
104437.87
... More
Extra Rate For Second Floor
22.64
953
21585.43
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
Total For All Floor
3562.41
560
1996588.31
... More
Extra Rate For First Floor
1694.26
10
17857.5
... More
Extra Rate For Second Floor
136.46
21
2875.21
... More
Centring and shuttering for Columns ( Square Or Rectangular or polygonal in plain)
Total For All Floor
1975.12
502
992537.3
... More
Extra Rate For First Floor
717.52
10
7562.66
... More
Extra Rate For Second Floor
242.72
21
5114.11
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
Total For All Floor
2385.2
400
954867.12
... More
Extra Rate For First Floor
1132.24
10
11933.81
... More
Extra Rate For Second Floor
120.64
21
2541.88
... More
Centring and shuttering for stair cases with sloping with soffits including risers and stringers.
Total For All Floor
119.55
469
56171.76
... More
Extra Rate For First Floor
57.17
10
602.57
... More
Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or bartering including attached pillasters buttersses etc
Total For All Floor
840.71
426
358705.74
... More
Extra Rate For First Floor
289.25
10
3048.7
... More
Extra Rate For Second Floor
111.28
21
2344.67
... More
Centring and shuttering for parapet, fascias and other similar items including edges.
Total For All Floor
645.84
547
353804.07
... More
Extra Rate For First Floor
215.28
10
2269.05
... More
Extra Rate For Second Floor
215.28
21
4535.95
... More
Extra for using computerised concrete batch mixing plant including carriage by transit mixer within 1 km lead (note: where concrete mixer is already included in the rate the same shall be deducted )
1867.42
130
243941.07
... More
Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)
Total For All Floor
1867.42
92
173128.51
... More
Extra Rate For First Floor
333.03
23
7719.64
... More
Extra Rate For Second Floor
31.48
46
1459.1
... More
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
Total For All Floor
354.86
5410
1920026.81
... More
Extra Rate For First Floor
192.7
153
29639.19
... More
Extra Rate For Second Floor
6.9
307
2122.58
... More
Providing and laying in super structure for first storey factory made with vibro-hydraulic compaction machine precast Hollow block of cement concrete setting in position with cement mortar 1:3 (1 cement:3 course sand ) including cost of hosting, centering and shuttering complete as per IS:2185 (Part-1): 2005.
Total For All Floor
224.02
7935
1777798.08
... More
Extra Rate For First Floor
88.06
153
13544.51
... More
Extra Rate For Second Floor
63.76
307
19613.85
... More
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure
Total For All Floor
1463.04
740
1082766.64
... More
Extra Rate For First Floor
663.35
15
10480.93
... More
Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits.
131.2
1373
180237.31
... More
12.5mm thick cement plaster 1:5.
Total For All Floor
3894.74
193
754644.82
... More
Extra Rate For First Floor
3585.38
2
7565.15
... More
Extra Rate For Second Floor
688.88
4
2900.18
... More
20mm thick cement plaster 1:5.
Total For All Floor
3894.74
264
1031482.94
... More
Extra Rate For First Floor
3585.38
2
7565.15
... More
Extra Rate For Second Floor
688.88
4
2900.18
... More
12.5mm thick cement plaster 1:4.
Total For All Floor
768.94
202
155471.98
... More
Extra Rate For First Floor
669.76
2
1413.19
... More
Extra Rate For Second Floor
294.03
4
1237.87
... More
20mm thick cement plaster 1:4.
Total For All Floor
768.94
278
214172.86
... More
Extra Rate For First Floor
669.76
2
1413.19
... More
Extra Rate For Second Floor
294.03
4
1237.87
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS Clamp U-PVC pipes (working pressure 4kgf. / sqcm) pipe 110 mm dia.
330.4
265
87714.59
... More
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer in- charge. UPVC 110 mm bend
40
142
5688.8
... More
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
40
88
3539.6
... More
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
40
114
4598.8
... More
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster
40
745
29837.2
... More
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
40
87
3514.8
... More
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
1463.2
750
1098599.82
... More
Cement concrete 1:2:4 gola 10cm x 10cm 3concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
218.77
72
15906.77
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taken only from outside the premises laying in plinth in 15 cm layers including ramming, watering and consolidating including all leads.
912.81
389
355274.78
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
983.62
66
65282.86
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
Total For All Floor
2262.71
207
470553.17
... More
Extra Rate For First Floor
1293.02
6
8171.89
... More
Providing and laying resilient vinyl sheet floor covering 2 mm thick, having a vinyl plastic wear layer with backing intended for use in light commercial and residential buildings, duly fixed to the base floor using adhesive as approved by the manufacturer.
142.21
897
127644.85
... More
Providing and laying plain coloured 3.20mm gauge linoleum covering to floors laid dry. The term linoleum has been derived from the Latin words linum, meaning linseed, and oleum, meaning oil. Linoleum flooring can be described as a type of flooring that makes use of solidified linseed oil (linoxyn) as the base, along with wood flour, tree resins, cork dust, a touch of ground limestone and pigments (for adding color).
93.92
762
71635.6
... More
Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material.
Total For All Floor
135.76
396
53809.83
... More
Extra Rate For First Floor
88.52
12
1118.89
... More
Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
Total For All Floor
642.69
1160
745719.63
... More
Extra Rate For First Floor
302.86
3
957.04
... More
Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing
Total For All Floor
40.66
1409
57310.27
... More
Extra Rate For First Floor
17.27
3
54.57
... More
Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness andcolouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects.
714.1
130
93282.88
... More
Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-incharge
20.07
1079
21672.39
... More
Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.)
256.79
187
48153.26
... More
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre.
78.07
448
35037.04
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm
Total For All Floor
1525.74
1501
2290822.32
... More
Extra Rate For First Floor
788.6
3
2491.98
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size Size 600x600 mm.
1525.74
130
199307.42
... More
Providing and laying flamed finish Granite stone 18mm thick in flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Total For All Floor
234.72
2219
520993.9
... More
Extra Rate For First Floor
117.36
3
370.86
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
Total For All Floor
83.02
3456
286954.48
... More
Extra Rate For First Floor
47.38
3
149.72
... More
Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability)
Total For All Floor
152.57
1911
291631.45
... More
Extra Rate For First Floor
78.86
3
249.2
... More
Providing & fixing 16 guage stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainles steel pipe, Balusters of 40mm dia stainless steel pipe complete in all respects.
1332.8
506
675369.74
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) :
For fixed portion & Chaukhat
416.33
370
154387.65
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
136.56
387
52942.95
... More
Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge. 6mm thick ACP Sheet
34.14
3281
112035.53
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
34.14
1090
37225.23
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge.
38
1961
74541.56
... More
Providing Polyster Powder coating 50 micron any coloured specrified to aluminium section of various sizes including carrriage of material from marktet to workshop
552.89
71
39609.04
... More
Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification, conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
For fixed portion ( For Door Chowkhat)
192.33
501
96447.73
... More
Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
91.69
2982
273461.76
... More
Supply & Fixing of door frames (Chowkhats) consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (base steel as per IS:513) with zinc of 120gm/sqm & Powder coated with pure Polyster powder upto 50 micrones (as per approved colour) , 3 Nos 100mm but hinges 2mm thick, 6 Nos 1.2mm thick CRCA electroplated stiffner, 6 Nos M.S hold fast with split and tail welded to stiffner plate 200mm long, Receiver for aldrop, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.60mm of approved shade, fixed in position, including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in- Charge.
Doors frame of size 80mm x 50mm with 37 mm wide single rebate for 35mm door shutter .
565.02
1192
673820.25
... More
Supply & Fixing of Window frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS : 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12- 16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position by means of PVC & metal hold fastner with PVC cap complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in-Charge.
Windows Outer frame of size 72mm x55mm and central mullion 72 mm x 50mm with Double rebate.
897.31
1097
985022.05
... More
Supply & Fixing of Window shutter consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS : 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position fixed in position by means of screws , complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in- Charge.
Glazed Windows shutter Section 47mm x 20mm (Without Glass)
109.22
5600
611676.78
... More
Wire Mesh Windows shutter Section 40mm x 20mm with S.S wire mesh 32 guage flymesh with 144 holes per square inch
109.22
5692
621686.79
... More
Providing and fixing glazing in door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of Gasket /beading shall be paid as per respective item)
Float glass panes of 5.5 mm thickness
256.73
816
209609.78
... More
Providing & fixing fixed beeding 12mm x 12mm for fixed glass with ECO fixed gasket (EPDM)
842.33
252
212974.72
... More
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
46.09
10798
497723.61
... More
Providing Polyester Powder coating 60 to 70 micron any coloured specified to M.S Grill section of various sizes including carriage of material from market to workshop & workshop to site of work.
2188.55
27
59944.38
... More
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1) (1999) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
188.59
2430
458352.91
... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (including cost of glass) Rectangular or square
102
403
41155.98
... More
Providing and fixing 0.50mm thick aluminum sheet including cost of necessary fittings i.e. screws, etc. complete
188.59
522
98545.82
... More
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
348.56
116
40760.61
... More
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm
115
209
24109.75
... More
Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).
73
1826
133354.21
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. 1 (size of door up to 700mm)
73
1039
75905.4
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge.
6
1961
11769.72
... More
Providing & fixing teak wood top size 150mm x 75mm on stair railing including polishing complete in all respect.
220.5
2042
450424.17
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending.) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at mid specified in IS:4020-1998,Drawings and to the entire satisfaction of engineer-in- charge.
185.72
1300
241439.71
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile confirming to ISO 5 (class 100) specifications
166.63
2272
378650.01
... More
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 1912SUB HEAD : 26- N 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge
1849.89
1714
3170785.46
... More
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in charge.
64.19
297
19070.21
... More
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
Total For All Floor
1990.67
7876
15680328.43
... More
Extra Rate For First Floor
582.18
13
7975.87
... More
Extra Rate For Second Floor
39.16
27
1072.59
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
9342.38
84
787375.79
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
7789.46
79
615445.23
... More
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
188.59
45
8543.13
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
188.59
29
5563.41
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
188.59
69
13112.66
... More
Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
776.46
163
126788.15
... More
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
776.46
126
98160.07
... More
Providing and fixing polycarbonate sheet sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws with EPDM seal, and the joints shall be provided with aluminium strips at top and bottom as a seal complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
44.96
1672
75216.28
... More
Construction of Plinth protection complete as per drawing.
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
22.99
191
4408.1
... More
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
9.2
4122
37923.96
... More
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.
33.11
5349
177123.93
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
72.46
549
39822.57
... More
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
108.69
345
37558.92
... More
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
72.46
193
14039.85
... More
Construction of Sub Station cum Electrical Panel Room
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
186.28
191
35717.33
... More
Providing and applying Anti Termite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturer's specifications (i) In foundation pits, by treating the bottom & sides upto height of 300mm by uniformly spraying solution @ 5 Litre / Sqm (ii) In the refill earth on both sides of all built up walls @ 7.5 Litre / Running meter ( width - 300 mm, depth - 450 mm ) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidated earth within the outer perimeter @ 5 Litre solution per Sqm.
208.38
391
81664.12
... More
Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
23.42
4607
107905.07
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
49.24
6527
321425.43
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
147.88
221
32716.97
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
57.58
5131
295478.1
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
77.13
7317
564425.77
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
357.3
560
200252.36
... More
Centring and shuttering for Columns ( Square Or Rectangular or polygonal in plain)
157.01
502
78900.67
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
174.72
400
69945.66
... More
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
46.37
5275
244645.34
... More
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure
31.21
724
22618.51
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS Clamp U-PVC pipes (working pressure 4kgf. / sqcm) pipe 110 mm dia.
36.58
265
9711.26
... More
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer in- charge. UPVC 110 mm bend
15
142
2133.3
... More
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
15
88
1327.35
... More
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
8
122
982.32
... More
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster
8
738
5906.08
... More
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
8
87
702.96
... More
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
324.82
736
239203.94
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
76.35
74
5675.1
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taken only from outside the premises laying in plinth in 15 cm layers including ramming, watering and consolidating including all leads.
388.84
389
151340.42
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
74.51
66
4945.23
... More
12.5mm thick cement plaster 1:5.
230.75
197
45559.28
... More
20 mm thick cement plaster 1:5 in two coats work.
230.75
270
62383.26
... More
12.5 mm thick cement plaster 1:4.
84.38
205
17370.47
... More
20 mm thick cement plaster 1:4.
84.38
284
23965.61
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
303.12
549
166588.69
... More
Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :.
303.12
1165
353383.36
... More
Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing
8.11
1413
11460.89
... More
Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-incharge
9.29
1079
10031.71
... More
Doors frame of size 80mm x 50mm with 37 mm wide single rebate for 35mm door shutter .
72.24
1192
86150.53
... More
Windows Outer frame of size 72mm x55mm and central mullion 72 mm x 50mm with Double rebate.
96.2
1097
105603.55
... More
Glazed Windows shutter Section 47mm x 20mm (Without Glass)
13.21
5600
73981.42
... More
Wire Mesh Windows shutter Section 40mm x 20mm with S.S wire mesh 32 guage flymesh with 144 holes per square inch
13.21
5692
75192.11
... More
Providing and fixing glazing in door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of Gasket /beading shall be paid as per respective item)
Float glass panes of 5.5 mm thickness
26.42
816
21570.87
... More
Providing & fixing fixed beeding 12mm x 12mm for fixed glass with ECO fixed gasket (EPDM)
86.68
252
21916.17
... More
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
2.13
10798
23001.76
... More
Providing Polyester Powder coating 60 to 70 micron any coloured specified to M.S Grill section of various sizes including carriage of material from market to workshop & workshop to site of work.
213.29
27
5842.01
... More
Providing and fixing ball bearing for push and pull type rolling shutters, from 9.20 to 12 sqm area
15.61
1324
20671.54
... More
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1) (1999) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
10.97
2430
26661.71
... More
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
10.97
116
1282.83
... More
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm
5
209
1048.25
... More
Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material.
8.64
408
3530.56
... More
Providing & fixing 16 guage stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainles steel pipe, Balusters of 40mm dia stainless steel pipe complete in all respects.
105
506
53206.65
... More
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
141.68
7876
1116000.61
... More
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in charge.
304.7
297
90523.32
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
630
84
53096.4
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
461.32
79
36448.89
... More
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
10.97
45
496.94
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
10.97
29
323.62
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
10.97
69
762.74
... More
Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
168.68
163
27543.76
... More
Construction of Plinth protection complete as per drawing.
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
11.14
191
2135.98
... More
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
4.46
4122
18384.88
... More
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.
16.05
5214
83698.18
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
35.12
549
19301.25
... More
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
52.67
345
18200.65
... More
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
35.12
193
6804.85
... More
Outer Infrastrucure
Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications.
2948.51
421
1243858.43
... More
Construction of granular sub-base by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications
239.08
1712
409450.8
... More
Construction of dry lean cement concrete Subbase over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site with transit mixer with lead up to 10 km., laid with a paver with electronic sensor, compacting with 8- 10 tonnes vibratory roller, finishing and curing.
239.08
3580
856112.01
... More
Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications
305.64
6206
1897046.35
... More
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge . IS Code: 15658 (2006)
371.6
704
261662.14
... More
Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours
37.16
68
2544.72
... More
Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications
405.38
376
152702.59
... More
Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
24.84
4306
106962.03
... More
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
182.42
22
4035.13
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
182.42
69
12683.66
... More
Cast Iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. Seat and back shall be made of 10 strips of M.S. pipes 63 mm x 25 mm of 14 gauge with one M.S. Flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. Spray painted with approved brand paint. Fixed by grouting with 1:2:4 cement concrete (Minimum weight of each bench 105 kg)
15
13187
197815.65
... More
Construction of Boundary Wall
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
276.3
191
52977.76
... More
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
25.29
3808
96311.65
... More
Reinforced cement cocrete M-25 Mechnicaly batch mixed using batch type concrete mixer as per IS: 1791 and vibrator by needle vibrator but excluding steel reinforcement, centering and shuttering in foundation and plinth.
58.81
6027
354505.5
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth
135.02
5266
711059.88
... More
Reinforced cement cocrete M-25 Mechnicaly batch mixed using batch type concrete mixer as per IS: 1791 and vibrator by needle vibrator but excluding steel reinforcement, centering and shuttering in Superstructure.
5.86
7086
41528.36
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering
289.81
221
64117.56
... More
Cold twisted deformed (ribbed/ tor steel) Bars Fe 550 grade as per IS 1786-2008 for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.
46.13
7876
363361.86
... More
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
93.91
5410
508115.08
... More
12.5mm thick Cement Plaster in CM 1:4
438.95
193
85050.95
... More
20mm thick Cement Plaster in CM 1:4
487.73
264
129170.41
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
926.68
84
78100.59
... More
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
926.68
126
117150.89
... More
PUBLIC HEALTH SERVICES
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
Single Socket Type B
110mm o/d single socket SWR UPVC pipe lines laid complete
348.37
396
138010.26
... More
90mm o/d SWR UPVC pipe lines laid complete
345.32
344
119028.35
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
For 110mm o/d pipes
Elbow 90 Degree (All side socketed)
48
162
7803.36
... More
Vent Cowls
13
45
590.2
... More
Coupler
61
111
6776.49
... More
Single Tee With Door
65
236
15360.8
... More
Elbow 90 degree (all side socket)
11
119
1309.99
... More
Vent Cowls
11
37
413.93
... More
Coupler
58
109
6341.14
... More
Single Tee With Door
17
159
2704.87
... More
P Trap/Floor Trap 110mm x 110mm
With 110mm o/d outlet deep seal at Ground Floor
36
338
12181.68
... More
With 110mm o/d outlet shallow seal at First Floor
45
338
15227.1
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge) 110mm dia
484
101
49014.68
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge) 90mm dia
420
85
35998.2
... More
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
M.S. Holder bats clamps for 100mm i/d as per table-1
39
217
8470.02
... More
M.S. Holder bats clamps for 90mm o/d as per table-1
33
150
4950
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm as per table-1
17
1930
32810.17
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
15
6780
101704.95
... More
uPVC Pipe 6 Kgf/cm2 50mm i/d as per table-1
128.31
181
23284.42
... More
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
SDR 11 CPVC pipes & fittings 20mm o/d
400.79
233
93460.22
... More
CPVC SDR 11 Pipe & fitting 25mm o/d
320.63
301
96522.46
... More
CPVC SDR 11 Pipe & fitting 40mm o/d
219.45
532
116813.24
... More
EXTERNAL IN THE GROUND : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, & testing of joints excluding cost of excavation complete as per direction of Engineer-in-Charge.
CPVC SDR 11 pipe & fittings 50mm o/d
100
577
57767
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
721.42
72
52440.02
... More
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
Through wall 11.43 cm thick Detail as per Table-2
16
176
2822.72
... More
Through wall 22.86 cm thick Detail as per Table-2
38
251
9564.98
... More
Providing, fixing and jointing Cpvc Union Couplings with Upvc Pipes complete in all respect.
25mm i/d Cpvc Union
23
146
3358
... More
40mm i/d Cpvc Union
42
316
13274.94
... More
Providing, fixing and jointing CPVC Ball valves screwed with CPVC ball & spindle & Teflon seats, on CPVC Pipe lines including all carriages complete.
25mm i/d CPVC Ball valves
21
384
8064
... More
40mm i/d CPVC Ball valves
25
682
17050
... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. Detail attached as per Table-3
36
5035
181286.28
... More
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut
36
381
13729.32
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
36
87
3147.84
... More
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.
11
6901
75916.28
... More
Vitreous white Chinaware Partition Large partition size 75 x 16.5 x 36.5 cm
11
4900
53909.68
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
Size 49 cm dia (above counter round)
36
4961
178631.64
... More
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
36
1013
36484.92
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. PVC tube connection of size 15 mm x 375 mm with PTMT nut
145
122
17720.45
... More
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
52
119
6190.6
... More
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
C.P. brass towel Rails size 15mm dia 610mm long
3
1621
4864.02
... More
C.P brass towel ring
36
959
34550.64
... More
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
36
888
31971.6
... More
C.P. brass Bib cock long eache/ long body without flange
16
1214
19435.04
... More
C.P Brass bib cock foam flow without flange
36
966
34778.16
... More
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
C.P.brass 15mm Angle valve without flange
145
870
126177.55
... More
C.P.brass 15mm Concealed stop cock with flange
44
1268
55810.04
... More
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect.
241
66
15995.17
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer- incharge )with various fixtures complete in all respect.
C.P. Brass extension piece, 25mm long to
50mm long
241
112
27165.52
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
36
1263
45473.4
... More
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in charge ) complete in all respect.
C.P. brass toilet roll holder with flap
36
1174
42287.4
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.Tripple Layer Tanks
19000
11
216220
... More
Providing and fixing in position automatic brass Ball Cock in tanks. Brass Ball Cock with rod and Plastic Ball
Brass Ball Cock with rod and Plastic Ball 25mm i/d
15
950
14264.7
... More
Providing and fixing in position CPVC. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
CPVC tank nipple 25mm i/d
15
179
2686.65
... More
CPVC tank nipple 40mm i/d
15
316
4741.05
... More
Construction of Plateform complete as per specification & as desired by Enginer-in- charge
For 1000 ltr Water Tank
11
5445
59895
... More
For 2000 ltr Water Tank
4
7400
29600
... More
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in
81
116
9442.98
... More
Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.
8
1079
8638.72
... More
Providing and fixing in postion storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect.
25 litre capacity water heater
8
13268
106147.68
... More
Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.
35mm dia 900mm (36”) long
3
1833
5499.27
... More
35mm dia 1200mm (48”) long
3
2809
8429.04
... More
Foldable U Type 762mm long
3
6652
19958.55
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
102.32
550
56335.35
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
117.92
221
26092.16
... More
Extra Rate For First Floor
117.92
3
372.63
... More
Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete .
Total For All Floor
220.24
900
198363.56
... More
Extra rate for First Floor
117.92
3
372.63
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area.
iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
242.26
527
127758.23
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Total For All Floor
704.92
906
638883.09
... More
Extra rate for First Floor
376.36
3
1189.3
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
Total For All Floor
20.48
3461
70882.3
... More
Extra rate for First Floor
10.66
3
33.69
... More
Extra labour for projected nosing of stair case of any shape and design
47.7
67
3215.93
... More
Water Cooler Full Steel Body 150/150 ltr without Stablizer
5
46849
234245.75
... More
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable each. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2 KVA
5
3852
19263.25
... More
Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge) including carriage and fixing in position complete in all respect.
5
40226
201134.2
... More
Excavation by mechanical means (JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
Earth work upto 1.5 m. Depth All classes of soil except rocky
129.9
104
13561.56
... More
Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged pipes with screwed flanged as per IS:8329- 2000, Class-K9 and laying the same in trenches to correct alignment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.
80mm i/d pipe lines laid complete
63.09
1764
111350.7
... More
100mm i/d pipe lines laid complete
123.44
1947
240366.07
... More
Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.
D.I. specials upto 300mm i/d
304
122
37091.04
... More
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1 as per ISI
80mm i/d Sluice Valves flanged
3
4430
13291.92
... More
100mm i/d Sluice Valves flanged
4
6016
24066.44
... More
Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.6 m. x 0.6 m.
7
5589
39128.81
... More
Providing & fixing C.I indicating plates of size 100mm x 100mm for SV/FH including synthetic enammel paint & letters in white enamel paint , fixing in the ground with angle iron of size 25x25x5mm, 230mm height from ground including concrete block complete in all respect as directed by Enginner-in-Charge.
7
252
1765.4
... More
Providing, fixing and jointing Cast Iron surface box for Sluice valve, Air valve, Fire hydrant etc. including all carriages complete.
231
71
16627.38
... More
Providing UGSR 100000 ltr including pump house
.Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer- in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including
Depth upto 1.50 m B.G.L.
315.55
87
27591.69
... More
Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
31.85
4578
145809.62
... More
Reinforced cement concrete M-30 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth including carriage
44.47
6801
302445.36
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
104.68
221
23159.4
... More
Reinforced cement concrete M-30 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in
foundation and plinth including carria
Total For All Floor
43.11
6801
293195.85
... More
Extra Rate For First Floor
3.53
190
673.1
... More
Extra rate for Smooth Surface of RCC
272.59
56
15278.67
... More
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786- 2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
Total For All Floor
82.78
7920
655665.61
... More
Extra Rate For First Floor
2.82
13
38.63
... More
Extra rate for using steel produced in integrated plant from original ores complete in all respect as per the directions of Engineer-in charge.
82.78
372
30871.97
... More
Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pillasters, buttersses etc when curved.
256.17
468
120095.06
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
Total For All Floor
147.67
560
82763.13
... More
Extra Rate For First Floor
29.12
10
306.92
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
5.6
400
2241.85
... More
First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.
Total For All Floor
12.86
5438
69940.65
... More
Extra Rate For First Floor
1.97
153
303.01
... More
12.5mm thick cement plaster 1:5.
44.16
198
8759.58
... More
12.5mm thick cement plaster 1:4.
70.33
206
14543.54
... More
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter
10.06
603
6076.04
... More
Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitred and electrically flash-welded, with iron fittings incluidng necessary iron handles,hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire guage) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:-
51
145
7445.49
... More
Extra for providing & fixing Steel Tube beading size 12mm x 12mm, 18 guage of approved shape and section with screw for fixing of glass panes in stead of glazing clips and metal slash putty in steel doors, windows & Ventilators complete in all respect
10.36
70
733.49
... More
Wire gauge fixed on steel windows of standard rolled steel section, with 3mm thick flat iron cover moulding of 12.5mm width, fixed with machine screws, complete in all
0.79
954
754.03
... More
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or
welding rod, complete fixed in position.
0.26
10798
2807.73
... More
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area
1.58
629
995.38
... More
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-202 Part-I) 1999, Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
1.88
2430
4569.19
... More
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
For shutter area above 0.50 sqm
3.46
116
404.61
... More
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm
1
209
209.65
... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
3.95
25
99.86
... More
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
4.23
45
191.62
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
4.23
29
124.79
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
8.18
69
568.76
... More
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
114.48
145
16643.1
... More
Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).
R.C.C. Manhole cover
2
1800
3600.86
... More
Foot Rest for Manhole.
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes
22
220
4843.96
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
Total For All Floor
16.09
214
3445.03
... More
Extra Rate For First Floor
16.09
3
50.84
... More
Conglomerate floor 50mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
20.83
406
8461.77
... More
20mm thick grey polished skirting or dado consisting of bottom layer of 16mm thick cement sand plaster 1.3 and finished 3mm thick topping of neat cement rubbed and polished including rounding of junction with
floors.
10.42
628
6545.22
... More
Terracing consiting of tiles 22.86 x 11.43 x 3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left
18.53
745
13811.34
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
17.98
71
1285.93
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS Clamp U-PVC pipes (working pressure 4kgf. / sqcm) pipe 110 mm dia.
2.74
265
727.42
... More
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
1
142
142.22
... More
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
1
88
88.49
... More
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
1
105
105.5
... More
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
1
697
697.92
... More
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
1
87
87.87
... More
Providing & installing,testing & commisioning of 1 no electrically driven Boosting Pump set of 5.00 BHP (KSB / crompton equilent make capable of delivering 80 LPM against a head of 40 mtr complete in all respect as per specifications
1
32685
32685
... More
Providing & fixing 2.50mm 2 core cable to Submersible Pump complete in all respect as per specifications
50
105
5250
... More
Providing & installation of smart starter panel board of 5BHP complete in all respect.
1
5265
5265.94
... More
Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested , equipment as requried such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect.Boring with 250mm id Housing Pipe
Upto 150 m depth BGL.
150
893
133950
... More
Extra for boring beyond 150mtr depth Boring with 250mm id Housing Pipe
Upto 150 m depth BGL.
50
1161
58050
... More
Supplying, lowering of MS Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.
200mm nominal diameter (weight 33.6 kg per metre) 6.4mm thickness
176
3508
617408
... More
Supplying, Fixing & lowering of Stainless Steel Cage type wire wound screen as per IS:8110-2000 or latest ISI marked Duly welded with suitable grade S.S welding electrode.to lower the strainer into tubewell bore.
200mm Steel Strainer (slot size 0.15mm)
6.30 mm thickness
20
10445
208900
... More
Supplying, Fixing & lowering of Stainless Steel Cage type wire wound screen as per IS:8110-2000 or latest ISI marked Duly welded with suitable grade S.S welding electrode.to lower the strainer into tubewell bore.
200mm internal dia
4
4878
19512
... More
Supplying, lowering & fixing of M.S Special socket to connect S.S Strainer to M.S Pipe duly welded with suitable grade welding electrode complete in all respect.
200mm internal dia
2
975
1950
... More
Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.
1
2673
2673
... More
Supplying at site Wooden Box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore.
1
578
578
... More
Supplying & Fixing of bail plug of M.S pipe complete with inverted U-hook attched to the bottom plug complete in all respect.
200mm internal diameter (weight 41.6 kg per metre) 8.0 mm thickness
4
3996
15984
... More
Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect.
200mm internal dia
1
738
738
... More
Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.
Capacity of Air compressor 300 cfm at 250 PSI
10
3001
30010
... More
Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in- charge.
8
1632
13056
... More
Collection of water sample from different strata and testing of sample from approved laboratory (Phisical & chemical Analysis)
3
280
840
... More
Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)
1
5678
5678
... More
Provision for Uranium in water testing
1
5000
5000
... More
Providng and installing testing of one no. electricaly driven submercible pump set capable of delivering lps against a head of mete along with electic panel board consising of electric applience such as automatic star delta push button r oil immersed stater, main swich, VM, AMPere metter, ELCV, Shuntcapasiter, singleface, preventer , indicatiing lamps kitkat etc. including GI colum pipe medium calss size 100 mm and legnth 50 mtr ruber gas kits nut and bolt submecible cable of 124 mtr lenght and 4 mm 2 size 15.00 BHP (Motor with pump)
1
58460
58460
... More
Panel board
1
30000
30000
... More
cable size of 124 mtr lenght and 4 mm 2 size
124
150
18600
... More
Colum pipe 100 mm i/d= 50mtr.)
50
659
32950
... More
Providng and installation 100 mm die delivery main from tube well to duck foot bend inculing cost of ci/df pipe, df slicevalves, d/f NRV & Specialy as CI bends tail piece test etc.
1
45000
45000
... More
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
110 mm o/d pipes
102
599
61121.46
... More
160 mm o/d pipes
152.25
1253
190828.63
... More
200 mm o/d pipes
50.6
1964
99385.99
... More
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L.
205.09
121
24846.65
... More
Cement concrete 1:6:12 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
35.6
4238
150894.16
... More
Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.
108.79
687
74829.03
... More
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
For depth not exceeding 3.0 m B.G.L. For all classes of soil except rocky
107.98
104
11262.31
... More
Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
12.13
4578
55531.26
... More
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth
30.12
5394
162478.42
... More
Cement Concrete 1:2:4 with stone ballast or shingle.using concrete mixing volumetric type
4.98
5761
28691.37
... More
Floating coat of 1:5mm thick neat cement laid in one operation to the topping
21.6
156
3381.91
... More
12.5 mm thick cement plaster 1:3
109.87
213
23489.11
... More
Cement rendering on plaster 1mm thick
109.87
69
7673.32
... More
Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
7.74
6226
48196.59
... More
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786- 2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
6.19
7920
49028.39
... More
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design
80
220
17614.4
... More
Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).
RCC Man hole cover with Frame 560mm i/d RCC man hole cover with frame as per ISI
16
2045
32734.4
... More
Anaerobic Baffled Reactor
Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer- in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. Depth upto 1.5 m B.G.L All classes of soil except rocky
320.63
87
28035.89
... More
Cement concrete 1:4:8 with brick balast 40mm gauge mixing by mechanical means using concrete mixer volumetric type
12.22
4978
60835.31
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
10.07
6495
65410.69
... More
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
86.76
5538
480537.61
... More
Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
9.46
7592
71823.06
... More
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
15.63
7920
123798.67
... More
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
69.21
560
38789.44
... More
Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
56.57
406
22980.43
... More
Floating coat of 1:5mm thick neat cement laid in one operation to the topping
56.57
30
1728.21
... More
12.5 mm thick cement plaster 1:2
398.59
230
91735.49
... More
Cement rendering on plaster 1mm thick
398.59
69
27837.53
... More
Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in- charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).
500mm i/d RCC man hole cover with frame as per ISI (Light Duty)
9
1620
14582.52
... More
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.
104
220
22898.72
... More
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type A
160mm o/d SWR UPVC pipe lines laid complete
27.4
547
14989.17
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
For 160 mm o/d pipes
Single Tee
5
451
2259.9
... More
Vent Cowls
1
71
71.36
... More
Coupler
2
215
431.66
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
For 160 mm o/d pipes
20
121
2429
... More
Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead
Vent Cowls
1
421
421.57
... More
Making soak pit 2.5 m outer Diametre 3.0 metre deep 230mm thick 1:5 brick
work honey comb with bricks of Ist Class and S.W. drain pipe 100 mm Diametre, 1.8 m long complete as per standard design.
1
23525
23525.71
... More
Roof Top Rain Water Harvesting
Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.
160mm o/d pipe of 6 Kgf. / sqcm
217.13
920
199859.48
... More
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respec
For depths not exceeding 3.0 metre B.G.L. For all classes of soil except rocky
186.87
104
19490.54
... More
Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.
4.56
687
3136.5
... More
Construction of Haudi internal size 0.90mtr x 0.90mtr & 0.90mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x600 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge
28
10338
289464
... More
Construction of Haudi internal size 0.45mtr x 0.45mtr & 0.45mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x450 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge
54
4156
224424
... More
Construction of Rain water recharge well 3.00mtr dia with working depth 3.50mtr dia consisting of drilling bore 300mm dia 35mtr, supplying and lowering pvc perforated housing pipe 200 mm dia 10kgf/sqcm 50mtr sorrunded with filtermedia , galvanised stainer CI pipe Class LA 150mm i/d 4mtr duly plugged from top with bail plug, fixing MS clamp, MS socket, Well size 3.00 mtr internal dia, 5.50 mtr deep constructed with BB in 1:5 cement sand mortar,plastered from inside, RCC slab, filtered media in 3 Layers, 2each RCC Man hole cover conneted with collecting chamber size 1mtr x 1mtr x 1.20 mtr deep providing and fixing MS grating and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge .
(Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates).
2
343852
687704
... More
Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
4.5kg capacity
24
7150
171604.56
... More
Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 6kg Capacity
24
2940
70567.2
... More
SITC of MS Pipe
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
25mm internal diameter
152
313
47720.4
... More
50mm internal diameter
671
689
462688.05
... More
65mm internal diameter
640
860
550566.4
... More
80mm internal diameter
305
1045
318959.85
... More
100mm internal diameter
18.29
1517
27763.31
... More
SITC of Butterfly valve
Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.
80 mm i/d for Yard Hydrants
2
2703
5406.84
... More
100 mm i/d for Internal Hydrants
2
3431
6862.08
... More
Proving & fixing Dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete.
100mm i/d check valve
1
4688
4688.57
... More
150mm i/d check valve
1
8302
8302.33
... More
Providing and fixing S.S Pressure Gauge complete as required complete in all respect.
Dial diameter 100mm calibration 0-16 Kg
2
809
1619.26
... More
Providing and fixing fire brigade inlet connection of cast iron body with Gun metal 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904. (to be connected to static tank). Four Way inlet connection
1
9743
9743.88
... More
Supplying, Installation, Testing and Commissioning of G.M Single headed hydrant valve with instantaneous Gun metal peet coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (TypeA) with blank Gunmetal Cap and chain including orifice plate made of 6mm th Stainless steel to keep the pressure not more than 3.5 per sqcm at any point complete in all respects.
10
6784
67845.7
... More
Supplying, Installation, Testing and Commissioning 63 mm dia gun-metal Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Gun metal nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.
9
2047
18427.05
... More
Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A, IS:636, 63mm dia x 15m long with gunmetal male & female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required.
1
4711
4711.09
... More
Supplying, Installation, Testing and Commissioning of Non-percolating flexible CP HOSE as per IS:8423 / 1994 ISI marked 63mm dia x 15 m long complete with instantaneous type gun-metal 63 mm dia male & female coupling (IS: 903) bound and riveted to hose pipes.
18
4197
75550.32
... More
Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 meter long type-2, hose reel Drum with bracket as per IS:884, 20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with main pipe complete in all respect.
1
9532
9532.07
... More
Supplying, Installation, Testing and Commissioning standard Fire Man's axe with heavy insulated rubber conforming to IS 936 complete in all respect.
1
848
848.96
... More
Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc.
900 mm wide x 600 mm high x 500 mm deep Size (for Yard Hydrant)
8
5541
44332.96
... More
600 mm wide x 600 mm high x 300 mm deep Size - (for RRL Reel)
1
4324
4324.3
... More
Providing & fixing Fire Hydrants with jointing including all carriages complete. (without Fire Hydrant surface box) Size 80mm complete in all respect.
C.I Fire Hydrants S.V. Type IS-909 for Internal Hydrants
1
12522
12522.99
... More
C.I Fire Hydrants 1S-908 for Yard Hydrants
8
7133
57065.36
... More
C.I Fire Hydrants Stand Post Type IS-908
8
11189
89519.04
... More
Supplying & fixing air vessel made out of 250mm. Dia, 8 mm thick MS sheet, 1200mm height with air release valves on top and flanged connection to risers, drain arrangements with 25 mm dia gunmetal wheel valves, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required
1
18343
18343.56
... More
Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all respect
1
3799
3799.27
... More
Supplying and Installation control valve C/W water motor gong complete with alarm Valve, constant trim, water motor bell, 2No. Pressure Gauge. All parts UL listed. complete in all respect.
100 mm control valve
1
27843
27843.88
... More
Supplying an Fixing Pendant / Upright type sprinkler with quartzoid bulb, operating temperature 68 / 79 degree centigrade of 15 mm dia orifice sprinler head to approved by UL/SN
238
268
63955.36
... More
Supplying and Fixing Sidewall Sprinkler rated at 68 / 79degree centigrade, quartzoid bulb type, 15 mm dia orifice sprinler head to approved by UL/SN complete in all respect.
53
311
16484.06
... More
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1 as per IS
150mm i/d Sluice Valves flanged
14
8914
124798.52
... More
80mm i/d Sluice Valves flanged
24
4430
106335.36
... More
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts.
100mm internal diameter
45.72
2428
111037.42
... More
150mm internal diameter
246.88
3522
869533.58
... More
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
Earth work upto 1.5 m. Depth All classes of soil except rocky (For 150mm pipe line as above)
162.94
104
17010.94
... More
XLPE INSULATED ARMOURED CABLES (UNDERGROUND):
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1metre below ground level including excavation, sand cushioning, covering with sand & First Class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-
Overall size 16sq.mm (3Core) Armoured (Underground)
61
497
30364.58
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
10000
11
113800
... More
Brass Ball Cock with rod and Plastic Ball 32mm i/d
1
1599
1599.98
... More
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
G.I. tank nipple 40mm i/d
1
377
377.1
... More
Construction of Plateform complete as per specification & as desired by Enginer-in- charge
1
13326
13326
... More
Jockey Pump
Supply, installation, testing & Commissioning of Kirloskar make pump in back pull out design having 50mm suction, 32mm delivery, CI casing, bronze impeller and CS shaft with gland packed arrangement coupled on common baseplate 7.5KW/10 HP, 2900 RPM TEFC sq. cage induction motor suitable for 3 phase, 415V, 50Hz AC supply confirming to through suitable flexible coupling. The pumpset is suitable for following duties:
Total head : 60m Flow: 10.8 m^3/hr(180 lpm)
1
115792
115792.31
... More
Diesel Engine
Supply, installation, testing & Commissioning of pump model in back pull out design (end suction type) having 100mm suction, 80mm delivery, CI casing, bronze impeller and CS shaft with gland packed arrangement coupled on common baseplate 37KW/50 HP, 2900 RPM TEFC sq. cage induction motor suitable for 3 phase, 415V, 50Hz AC supply confirming to through suitable flexible coupling. The pumpset is suitable for following duties: Total head : 60m
Flow : 137 m^3/hr(1620 Ipm)
1
591537
591537.78
... More
Electric Pump
Supply, installation, testing & Commissioning of MAKE FACTORY ASSEMBLED DIESEL ENGINE DRIVEN PUMPSET in back pull design having 125mm suction, 100mm delivery, CI casing, bronze impeller, C-40 shaft with gland packed arrangement coupled on common MS fabricated base frame vertical water cooled diesel engine complete with 12 V battery start arrangement, air cleaner, exhaust silencer(without piping), fuel filter, developing 56 bhp at 2500 RPM. Engine with twin belt driven radiator and complete with engine starting panel, Battery & AVM pods. Total head : 60m Flow : 137 m^3/hr(1620 Ipm)
1
279952
279952.96
... More
Sprinkler Pump
Supply, installation, testing & Commissioning of MAKE FACTORY ASSEMBLED DIESEL ENGINE DRIVEN PUMPSET in back pull design having 125mm suction, 100mm delivery, CI casing, bronze impeller, C-40 shaft with gland packed arrangement coupled on common MS fabricated base frame vertical water cooled diesel engine complete with 12 V battery start arrangement, air cleaner, exhaust silencer(without piping), fuel filter, developing 56 bhp at 2500 RPM. Engine with twin belt driven radiator and complete with engine starting panel, Battery & AVM pods.
Total head : 60m Flow : 1620 Ipm
1
279952
279952.96
... More
Hydrant Panel
Providing & fixing of Hydrant Electrical Panel of cubical type floor mounted power cum control of Jockey Pump 1 No. & Electrical Pump 2 No. having MCCB 400 Amp 3 Pole 36 KA, MCCB 180 Amp 3 Pole Contactor 110 Amp. Contactor 180 Amp Realy 66-110, Realy 14-23,SSP ,SP,MCCB 63 Amp, 3 Pole, Digital Meter Set, Hardware, Aluminium Bus bar Set, Wire & Thimble, Panel Box 16 Gouge. Complete in all respect.
1
42145
42145.91
... More
Providing & fixing smoke detectors ISI marked complete in all respect.
80
750
60000
... More
Providing & fixing heat detectors ISI Marked complete in all respect.
80
550
44000
... More
Providing & fixing fire alarms ISI marked complete in all respect.
10
1050
10500
... More
Providing & fixing exit signanges complete in all respect.
20
500
10000
... More
Providing & fixing sirens of 1.5km range complete in all respect.
1
7000
7000
... More
Air cooled chilling machine, Supply, Installation, testing & commissioning of 40 TR (- 3%)actual capacity air cooled Inverter scroll Chilling Machines fitted with hermetically sealed lnvertor scroll compressors, multi/single circuit chiller, Air cooled shell & tube condenser, Microprocessor based BMS Compitable control panel, suitable for R- 410a ecofriendly Refrigerant, Shell & Tube Insulated Evaporator, Expansion tank of suitable capacity Control Mechanism of actual Cooling capacity .
The unit shall confirm to ECBC norms and shall be factory tested as per AHRI standard 550/590 latest edition.
Note: i) The cost of RCC foundations will be included in chiller machine price and shall be made by the tenderer.
ii) In case manufacturer does not have single chillermachine of 40 TR then they can provide 2 nos of machines to fullfill the 40 TR (Make: Trane//Daikin/Carrier/Blue Star/Daikin/York
2
1435044
2870088
... More
PUMPS (Primary constant chilled water pump)
Supply, installation, testing and commissioning of PN16 rated Vertical Inline Split Coupled single stage centrifugal pump each capable of delivering the specified flow rate comprising the following and complete as per specifications.
Casing (Volute) - Cast Iron. Impeller - Gunmetal Bronze - Statically and Dynamically Balanced Casing Gasket - Confined Non Asbestos Fiber Pump Shaft - SS 416. Flush Line - Braided Stainless Steel Mechanical Seal - Outside Balanced (the pump design shall meet the requirement of servicing / changing the mechanical seal without disturbing the pump shaft alignment) with external flushline.
Motor Type - TEFC Squirrel Cage, Efficiency Class - IE3, Insulation - Class F, 415V ± 10% , 50Hz ± 5%, 3Ø AC Power Supply
Chiller Water Pump
Water Flow Rate: 96 USGPM Head : 15 m WC
2
103485
206970
... More
Secondary Chilled water pump ( with VFD )
Supply, installation, testing and commissioning of PN16 rated Vertical Inline Split Coupled single stage centrifugal pump each capable of delivering the specified flow rate comprising the following and complete as per specifications. Casing (Volute) - Ductile Iron.
Impeller - 316 SS - Statically and Dynamically Balanced Casing Gasket Confined Non Asbestos Fibre Pump Shaft - 316 SS. Flush Line - Braided Stainless Steel Mechanical Seal - Outside Balanced (the pump design shall meet the requirement of servicing / changing the mechanical seal without disturbing the pump shaft alignment) with external flush line.
Motor Type - TEFC Squirrel Cage, Efficiency Class - IE5, Insulation - Class F, 415V ± 10% , 50Hz ± 5%, 3Ø AC Power Supply VFD - Integrated motor mounted over Pump with IP- 55 protection. Pump should operate through sensor less control or wireless DPT control. Pump Efficiency should be more than 75% Integrated filter to meet EN61800-3 for RFI Control, Integrated DC link Reactor equivalent in performance to a 5% AC line reactor.
All the VFD should display the dynamic head & flow rate of the pump using inputs from ultrasonic flow meter and digital pressure gauge or using sensor less algorithms, (1 flow meter and 2 pressure gauges to be supplied for each VFD driven pump). Pump manufacturer to supply Ultrasonic flow meter and digital pressure gauges along with the pumps supplied or can display individual flow and head of each pump using sensor less algorithms. Pump Manager to assure performance management till DLP should be supplied for all VFD driven pump along with mode/Router for cloud connectivity without dependency on BMS.
Chilled Water Pump ( 1W+1S ) with integrated VFD (For Variable primary system) Water Flow Rate: 196 USGPM Head : 25 m WC
2
262064
524128
... More
Lot - Expended Polystyrene (TF quantity) insulation not less than 75mm thick duly cladded between aluminium sheets of 0.63mm thickness and properly clamped to pump in two semi-circular sections as per specifications.
Pump as above (1 working + 1stand by)
Note: The civil foundations reqd. shall be made by the tenderer.
(Make: Xylem, Grundfoss, Armstrong)
Microprocessor Based Pump Logic Controller (Should Be capabale to control at least 2 Nos Pumps)
SITC of Separate ( not as apart of VFD )Microprocessor based Primary variable pump logic controller in IP 54 protection, to control following nos. Pumps. Suitable to operate on Sensorless/ wireless mode ( 3 wireless DP sensor to be consider for each zone) & Should be Modbus RTU/ BACnet enabled for communicating with BMS & RS-485 serial communication with Pump VFD. The staging of pumps should be based on efficiency (not on capacity) to ensure minimum operating cost. End of curve protection should be sensorless control based Power Rating: 230 V/ 1 ph/ 50 Hz Display: Minimum 4.3" backlit LCD Hand-Off-Automatic (H-O-A) control Secure front cabinet door with lock and key UL Listed and CSA Approved Remote or local start/stop mode of operation. 2-level (field and factory) password security Remote zone signals, zone faults, zone setpoint and active control zone
For Chilled water pumpset (1W + 1S)
1
229790
229790
... More
Hot Water Generator
SITC of Electric hot water generators of following capacities vertical tubular shell type fabricated from MS sheet 6mm Shell 8mm Dish ends, Top open able with sufficient number of Nut Bolts and joints shall be welded and shall be tested for working pressure of 21 kg/cm² complete with sheathed tubular electric resistance type heater elements , control panel with contactor, internal, wiring, safety controls, thermostat, IN and OUT connections, drain connection at the bottom, water flow switch and interlocking with control panel, Step Controller, Pressure Gauges with Ball Valves, Pressure relief Valve, Low Level cutout and Auto vent. It shall be insulated with 50 mm thick fiber insulation and covered with 1 mm thick Aluminium cladding.
Note: The civil foundations reqd shall be made by the tenderer.
72 KW ( with multiple Steps)
(Make: Rapid cool/KEPL/Emerald)
1
237992
237992
... More
Supplying, installing, testing and commissioning of Floor Mounted double skin type air handling units with thermal break profile made of Min .48+-2 mm thick panels consisting of pre plasticized G.I casing made of thickness 0.8 mm outside layer and Aluminium sheet of thickness 0.8mm inside layer with polyurethene foam (PUF) CFC Free insulation of density 40+-2 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower DIDW backward curved centrifugal fan of 125 mm WC static pressure for FM AHU's, 8 row deep cooling, section with hydrophillic aluminium finned copper tubes (tube thickness not less than 0.5mm), Filter section with 50 mm thick flange type pre filter & MERV-13 fine filter on Suction or as per site requirement. , belt drive package with TEFC drive motor suitable for 415 ± 10% volts, 50 Hz, 3 phase, A.C supply,Mixing box with Aluminium Anodised Extruded dampers at fresh and return air cutouts, drain connections with drain valve, stainless steel drain pan,Light , thermometers and pressure gauge at the inlet and outlet of cooling coil, necessary vibration isolation arrangement etc, complete as per specifications of following capacity
:(AHU Design/Air Flow must be according to HEPA Filters for OTs, As these Hepa Filters to be put in supply Air Duct or at Terminal)3500 FM 125 8 RD /10.0
2
249315
498630
... More
3500 FM/CS 125 6/8 RD /10.0
1
249315
249315
... More
6000 FM 125 6 RD /15.0
1
414196
414196
... More
Supplying, installing, testing and commissioning of factory built Ceiling Suspended double skin type air handling units with thermal break profile made of Min 32 +-2 mm thick panels consisting of pre plasticized G.I casing made of thickness 0.6 mm outside layer and sheet of thickness 0.6mm inside layer with polyurethene foam (PUF) CFC Free insulation of density 40+-2 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower DIDW backward/Forward curved centrifugal fan for CS AHU's, 6 row deep cooling coil, section with aluminium finned copper tubes (tube thickness not less than 0.5mm), Filter section with 50 mm thick box type pre filter & microvee filter on common frame. ,
4400 CS 70 6.0 RD /12.0
1
269062
269062
... More
3000 CS 65 6.0 RD /10.0
1
194063
194063
... More
2000 CS 65 6.0 RD /6.0
2
141146
282292
... More
FCU
SITC of Double Skin FCUs having CHW cooling coil with pre filters complete with Ball valve assy, 2-way control valves, Thermostat, wiring, fittings, Aux. Drain tray, pipe insulation, hanging arrangements etc. Fan coil units shall be suitable for operation on 220 +6% Volts, 50Hz, single phase power supply complete in all respects of cap:- 2.0 TR
Make: Systemair,Edgtech,Flaktwood,Zeco, Sant
5
29377
146885
... More
AHU For Exhaust
Supplying, installing, testing and commissioning of factory built Floor Mounted/Ceiling suspended double skin air handling units made of min 25 mm thick panels consisting of pre plasticized G.I. casing of thickness 0.6 mm outside layer and plane GI of 0.6mm inside layer with polyurethane foam (PUF) insulation of density 32 kg/m3 factory injected between them by injection molding machine, complete with blower section with blower DIDW backward/Forward curved centrifugal fan, belt drive package with TEFC drive motor suitable for VFD & 415 ± 10% volts, 50 Hz, 3 phase, A.C supply, complete with canvass connections ,necessary vibration isolation arrangement etc, complete as per specifications of following capacity
Make: Systemair,Edgtech,Flaktwood,Zeco,Sant Filter Make : AAF, Camfil,Klenzaid
400 CFM 75 mm Static with Hepa Filter(H-13) of 99.77% to 3 Micron & Micro Vee Filters at discharge and Pre Filters with MERV 8
2
95232
190464
... More
900 CFM 75 mm Static with Hepa Filter(H-13) of 99.77% to 3 Micron & Micro Vee Filters at discharge and Pre Filters with MERV 8
3
95232
285696
... More
Duct mounted Electric Air Heater Unit for Reheating
Supply, installation, testing and commissioning of Flanged type duct mounted non0flameproof Electric Air Heater Unit made out of 0.8mm thick GPSP sheet having 30mm flange and duly insulated with fiberglass wool to minimize heat loss. AISI 304 stainless steel Electric tubular heaters without fins having low watt density are provided with support brackets. The unit shall be equipped with safeties such as adjustable type primary thermostat, KLIXON® secondary thermostat manual reset type and Air flow switch to prevent the heater from operating without airflow. It shall be provided with an inbuilt control panel having suitable rating incomer MCB, ON/Trip indication light, contactor, Thyristor module to operate 00100% as per demand, terminal for AHU/Blower interlock, grounding terminal, power and control wiring. The unit shall be BMS compatible. Three Phase Wiring and The unit shall be CE certified. 3.0 KW (Make : KEPL, Rapid Cool,Emerald)
6
62221
373326
... More
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. Make: Jindal Hisar/TATA/Sail
125 MM Pipe DIA
40
1576
63040
... More
100 MM Pipe DIA
160
1264
202240
... More
80 MM Pipe DIA
150
907
136050
... More
65 MM MM Pipe DIA
40
742
29680
... More
50 MM MM Pipe DIA
80
586
46880
... More
40 MM MM Pipe DIA
130
436
56680
... More
32 MM MM Pipe DIA
30
366
10980
... More
25 MM Pipe DIA
140
289
40460
... More
INSULATION
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.
For 125 MM Pipe DIA with 75 mm Thick Insulation
40
1196
47840
... More
For 100 MM Pipe DIA with 50 mm Thick Insulation
160
793
126880
... More
For 80 MM Pipe DIA with 50 mm Thick Insulation
150
628
94200
... More
For 65 MM Pipe DIA with 50 mm Thick Insulation
40
543
21720
... More
For 50 MM Pipe DIA with 50 mm Thick Insulation
80
449
35920
... More
For 40 MM Pipe DIA with 50 mm Thick Insulation
130
364
47320
... More
For 32 MM Pipe DIA with 50 mm Thick Insulation
30
323
9690
... More
For 25 MM Pipe DIA with 50 mm Thick Insulation
140
275
38500
... More
SITC with insulation Wafer Type C.I. Butterfly Valves(Manual) with Nylon Coated,Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot water circulation as specified,SS-stem with Hand Lever Fittings like Flanges, Nuts & bolts, etc. Make: Advance/Kirloskar/Sant
125 MM DIA
2
9051
18102
... More
100 MM DIA
6
6728
40368
... More
80 MM DIA
6
5439
32634
... More
65 MM DIA
4
4471
17884
... More
50 MM DIA
8
4162
33296
... More
Supplying, fixing, testing and commissioning of duly insulated Balancing Valves with rating PN16 (Make: Advance/Kirloskar/Sant)
100 MM DIA
1
17338
17338
... More
80 MM DIA
2
11969
23938
... More
65 MM DIA
1
10559
10559
... More
50 MM DIA
2
9150
18300
... More
Supply,installation,testing and commissioning of Microbubble Air & Dirt Separator, with matching flanges, bolts, nuts & gasket, PN16 complete with flanged connection and as per the specifications as detailed earlier in the relevant section of specifications , and duly insulated with 50 mm thick TFF expanded polysterene and cladded with 26G aluminum sheet. Make: Advance/Kirloskar/Sant
100 MM DIA
1
27630
27630
... More
80 MM DIA
5
15089
75445
... More
50 MM DIA
3
9673
29019
... More
SITC Dual Plate Type Wafer Swing Check Valves duly insulated Cast Iron to IS 210 Gr. FG 260 with Fittings like Flanges, Gaskets, Nuts &bolts, etc. Make: Advance/Kirloskar/Sant
100 MM-DIA
2
8829
17658
... More
80 MM DIA
2
18691
37382
... More
SITC of Forged Brass Ball valves with & without strainers along with all required fittings etc.of sizes: Make: Advance/Kirloskar/Sant
25 mm without strainer
5
995
4975
... More
25 mm with strainer
5
3030
15150
... More
32 mm without strainer
1
1626
1626
... More
32 mm with strainer
1
4668
4668
... More
40 mm without strainer
5
2328
11640
... More
40 mm with strainer
5
7009
35045
... More
SITC Water Flow Switchs
(Make :Rapid Cool/Honeywell/Anergy)
4
1549
6196
... More
SITC Auto Air Purging Valve 3/4"
(Make : Rapid Cool/Honeywell/Anergy)
15
2267
34005
... More
SITC Pressure Gauge 4" Dial (0 To 6 Kg/CM2) (Make: Fiebig/Guru/wari)
10
1301
13010
... More
SITC 6" StemType Thermometers (0 To +50OC) (Make: Fiebig/Guru/wari)
10
557
5570
... More
SITC of 2 - Way Mixing Valves with Actuator, Linkage, RH +Temperature Controller, Sensors, Control wires, Thermostat and Necessary Fittings etc. as per Following Sizes (Make:RC/Anergy/Honeywell)
50 mm dia
3
26650
79950
... More
40 mm dia
5
18493
92465
... More
25 mm dia
5
16656
83280
... More
RH & T Sensors
Supply Installation, Testing & Commissioning of Room Type Temperature Sensor with Range 0-50 Deg C (resistance Output)+ RH with Range 0-100RH Transmitter with active 0-10V outputs for both T & RH. (RH Accuracy ±3% )
Make : Schneider/Siemens /Honeywell
5
20235
101175
... More
Air Differential pressure sensor and adjuster package
Supply, install , test and commission room differential pressure sensor and remote adjuster package for varying the speed of the exhaust fan-(by providing command to the variable frequency drive of the exhaust fan),to maintain the desirable positive / negative the pressure relationship of the isolation rooms with respect to the adjacent areas.
Make : Schneider/Siemens /Honeywell
4
12658
50632
... More
SITC of Factory/SITE fabricated Aluminium Ducting complete with hanging arrangement of fasteners, GI threaded rods etc.,However Bends,Vanes,Collor can be can be made at site as per requirment. (Make: Zeco/Eco Duct/Rolastar/Ductofab , Sheet Make :TATA /Sail)
0.8 mm (22 G)
60
1687
101220
... More
1.0 mm (20 G)
90
2044
183960
... More
SITC of Factory fabricated GSS Ducting complete with hanging arrangement of fasteners, GI threaded rods etc., However Bends,Vanes,Collor can be can be made at site as per requirment (Make: Zeco/Eco Duct/Rolastar/Ductofab , Sheet Make :TATA /Sail)
24 G (0.63 MM)
200
1038
207600
... More
22 G (0.80 MM)
80
1164
93120
... More
20 G (1.00 MM)
10
1290
12900
... More
Nitrile Insulation (Inside Conditions)
SITC of UL approved thermal insulation on AC ducts with closed cell nitrile rubber insulation of class 8O9 Fire rating conforming to BS 476 Part 6 including providing adhesive, adhesive tapes etc. as per specifications. (for indoor ducts only)
9 MM Thick
440
464
204160
... More
Armacell/K-Flex/Aerofoam
SITC of Acoustic lining of the supply duct with 10 mm thick Accosound Nitrile board with suitable adhesive to be pasted inside of the Plenum duct complete in all respects
10 mm thickness accosound Board
60
1117
67020
... More
Providing and fixing of HEPA Filters(H-13 or Equivalent) Having efficiency 99.97% down to 3 Micron in supply Air Duct of following Sizes
600(L)X 600 (W)X 300 (D) or Suitable Size as Per Site Requirment (Note: Qty may Increase or Decrease) (Filter MAKE: AAF, Camfil,Klenzaid)
12
17856
214272
... More
HEPA Filters & OT Plenum for Laminar Flow
SITC of Aluminium white epoxy powder coated or SS 304 Factory Fabricated O.T. PLENUM (Aprox.size 8'x6') & HEPA Filters Having efficiency 99.97%down to 3 Micron, I.P.D 15 mm HG & F.P.D. = 50 mm HG, The Hight of OT Plenum should not be more than 400 mm (Thermadyne, Klenzaid,Airtech ,AAF AND Filter MAKE: AAF, Camfil,Klenzaid)
2
204974
409948
... More
Grill/Diffussers
SITC of Aluminium extruded powder coated Grills for supply & return air w/o vcd (Make:Tristar/Carryaire/Ravistar/Sant)
11
4215
46365
... More
SITC of Aluminium powder coated Diffuser with removable core for supply & return air w/o vcd (Make:Tristar/Carryaire/Ravistar/Sant)
9
10125
91125
... More
Dampers
Supply, installation, testing & commissioning of Al Collar dampers (Make:Tristar/Carryaire/Ravistar/Sant)
6
4208
25248
... More
Supply, installation, testing & commissioning of CBRI approved Fire duct Dampers for at least 90 min fire rating as per UL555:1955 Specifications without Sleeve (Make:Tristar/Carryaire/Ravistar/Sant)
8
7534
60272
... More
Supply, installation, testing & commissioning of Spring Return Actuator and Control Panel Complete with Heat Sensors , Complete Control wiring and Limit switch, 4NM/7NM/9NM, (24VAC/220VAC) (Make:Tristar/Carryaire/Ravistar/Sant)
8
10696
85568
... More
Fresh Air / Exhaust air Louvers
SITC of Extruded aluminium exhaust air / fresh air louvres with frame, bird screen, pre- filter with frame, mounting arrangement etc. as per specifications and drawing. (Make:Tristar/Carryaire/Ravistar/Sant)
1
5962
5962
... More
Condensate Drain Piping:
Providing UPVC pipes of various sizes for condensed water drainage from Indoor unit to nearest disposal point in toilet/ outside rain water harvesting system as approved by architect/consultant/Client
All necessary civil works like cutting & chasing of walls/floor/ glass etc. and make them good thereof (Make : Diplast/Supreme/Polyplast)
40 MM DIA with 6 mm Nitrile Insulation
50
213
10650
... More
32 MM DIA with 6 mm Nitrile Insulation
130
161
20930
... More
25 MM DIA with 6 mm Nitrile Insulation
30
120
3600
... More
Supplying and laying of following 1100 volt grade PVC insulated sheathed copper conductor armoured cables in trenches, on walls clamped to wall with suitable clamps, saddles, and fixing bolts, or laying in ground including cost of digging brick and sand protection, and including jointing / connecting / terminating, testing and commissioning :
3.5C x 95 Sq. mm Aluminium (armoured) Conductor Per run
40
944
37760
... More
3.5C x 50 Sq. mm Aluminium (armoured) Conductor
30
558
16740
... More
3.5C x 35 Sq. mm Aluminium (armoured) Conductor
10
417
4170
... More
4C x 10Sq. mm mm Aluminium (armoured) Conductor
15
245
3675
... More
4C x 4.0Sq. mm Copper (armoured) Conductor
20
438
8760
... More
4C x 2.5 Sq. mm Copper (armoured) Conductor
10
311
3110
... More
8C x 1.5 Sq. mm Copper (armoured) Conductor
200
422
84400
... More
Control Cabling
Providing & fixing of electrical supply Flexible Cabling of 4 core x 2.5 sq. mm copper (Make : Havell's,Eko,Gloster,Finolex,Polycab/KEI)
30
165
4950
... More
Providing & fixing control cum transmission wiring/ Control Cabling of 4 core x 1.5sq. mm copper in suitable conduits for Actuator/Motor , Fire Dampers Control Dampers (Make : Havell's,Eko,Gloster,Finolex,Polycab/KEI)
30
101
3030
... More
1.5 MM² X 2 C CU for Controls / Interlocking with saddles etc (Make : Havell's, Eko, Gloster, Finolex, Polycab/KEI)
20
54
1080
... More
Main Electrical Panel (CPRI Approved OEM at least 70K)
Electrical Main Panel Powder Coated Made out of TATA/SAIL/ESSAR/JINDAL/Reputed make sheet having thickness 2.0 mm for load bearing surfaces & 1.6 mm Non bearing surfaces as per following specifications complete in all respect.
INCOMING SUPPLY : MCCB 500-630 Amps 50 KA 4 Pole Adjustable type with Rotary Mechanism & all Protections along with spreader links, etc : 1 No.
Multi Fuction VAF/VIF Meter (96mmX96mm Size) ,Indication Lamps LED Type RYB, Control MCB SP for Control (3 Nos),CT's 600/5 (3 Nos) and Control Terminal (8.0 Nos.) etc.
OUTGOING FEEDERS : MCCB 200-250 AMPs 36KA 3 Pole with Rotary Mechanism & all Protections along with spreader links, etc. : 3 Nos .(Chiller-2 W +1S).) with electrical interlocking provisioning
MCCB 160-200 Amps 36 KA 3 Pole with Rotary Mechanism & all protections along with Spreader links, etc : 2 Nos ( HWG- 1W+1S) with electrical interlocking provisioning
3 Nos. Primary CHWP : 32 Amp TP MCCB with Rotary Mechanism and Spreader Links outgoing for 5 KW (Approx) CHWP & 5 KW Dol starter along with auto manual selection switch , On off Push Button & Indicating Light . Primary CHWP x 3 No.(2W+1S)
MCB TPN Upto 20 Amps :2 Nos
MCB TPN Upto 63 Amps : 2 Nos
BUS BAR : Aluminium Bus Bar 600 A TPN Electrolyte grade E91 having Suitable size
Cross Section for Phase, Neutral& Current Carrying Capacity 0.8A / Sqm
Hardware ( PVC Channels / MCB Channels / Fibre- Glass Gaskets / Sleeves / nuts / bolt / washers / cooling fans etc. Including complete wiring, thimbles etc.
Unloading at site, placement of Panel on the foundation, co- ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and start-up of above mentioned Panel. (Switch Gear Make :Siemens/ABB/Schneider) (Panel Make : ABB/Siemens/L&T/Schiender/Vrindavan Electricals/Unitech Power System)
1
367533
367533
... More
AHU Panels for upto 7.5HP DOL type Starter
SITC of AHU panels duly powder coated wall mounted Made out of TATA / SAIL / ESSAR / JINDAL / Reputed make CRCA Sheet of 1.6 mm thick consisting of Upto incomer as MPCB suitable as per AHU
ON/OFF/TRIP indication light LED type, DIGITAL Ammeter with ASS; CT's 30/5; contactors up to32A or Suitable (with 2 NO+ 2NC); Start/Stop push buttons with auto & Manual control switch, Single Phase Preventer, MCB DP upto 10 Amps C Curve ,Over load Relay 16-25A or Equivalent Suitable , power & control terminals; neutral link and internal wiring & connections for AHU motors upto 7.5 HP or Suitable alongwith dehumidfier control , In case of exhaust dehumidifier control is not required. Panel Make : ABB/Siemens/L&TUnitech Power System/Vrindavan Electricals
6
30146
180876
... More
AHU Panel for upto 7.5KW with VFD & bypass with DOL Type Starter
SITC of AHU panels duly powder coated wall mounted Made out of TATA / SAIL / ESSAR / JINDAL / Reputed make CRCA Sheet of 1.6 mm thick consisting of Upto incomer as MPCB suitable as per AHU with VFD
VFD suitable for AHU alongwith bypass DOL starter consisting of the following: ON/OFF/TRIP indication light LED type, DIGITAL Ammeter with ASS; CT's 30/5; contactors up to32A or Suitable (with 2 NO+ 2NC); Start/Stop push buttons with auto & Manual control switch, Single Phase Preventer, MCB DP upto 10 Amps C Curve ,Over load Relay 16-25A or Equivalent Suitable , power & control terminals; neutral link and internal wiring & connections for AHU motors upto 10 HP or Suitable alongwith dehumidfier control ,In case of exhaust dehumidifier control is not required. Panel Make : ABB/Siemens/L&TUnitech Power System/Vrindavan Electricals
2
59796
119592
... More
Control Console PanelSuuplying, Installation, Testing & Commissioning of floor mounted desk type Control Consiole in A/c plant room containing various indications and controls for the A.C. system comprising of 3 Nos. chilling machine, 4 Nos. pumps, tower, 15 Nos AHU/CSU with test push buttons facility along with 5Nos Spare. The panel shall be fabricated from minimum 1.633 thick M.S. Powder coated sheet of approved design. The A.C. module of the Central Control shall have the following accessories:
Hooter & Flashing lamps to indicate operation of any safety/shut down with necessary contractors, accept, reset and test push buttons complete as per specifications.
1
171791
171791
... More
Panel Make : ABB/Siemens/L&TUnitech Power System/Vrindavan Electricals
Earthing
Providing, Installation, Testing & Commisioning Earthing station with copper plates , copper strips and copper wire complete in all respects as per ISI specifications.
1
21680
21680
... More
SITC of GI 8 SWG wire earthing complete with thimbles etc
40
53
2120
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
1
15899
15899
... More
etc. as required.
10
130
1300
... More
Providing and fixing of perforated type GI Cable Tray (1.6 mm thick) for Running Copper Refrigerant Piping of of Following Sizes including nut bolts G.I Thread rods Complte in all Respect
50mm x 450mm x 50 mm.
20
559
11180
... More
50mm x 300mm x 50 mm.
20
429
8580
... More
50mm x 150mm x 50 mm.
40
300
12000
... More
Expansion Tank ,
SITC of MS Expansion tank of size 1.0 m x 1.0 m x 1.0 m height made of 3 mm thick MS sheet complete with vent and drain connection, quick fill with float valve and control valve etc. as required. Litres duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete in all respect
1
21259
21259
... More
AOP cell with NANOX & PLASMAOX technology & Bi Polar Ionizer.
SITC of Advanced Oxidation Pentplasma (AOP) cells comprising of UVC lamp 254 NM on NANO metallic compound target Alumninum matrix cell duly enclosed by a poly casing tube, with the capability to produce plasma Hydroxyl oxidizers along with anti microbial coating (EPA Approved).
The unit shall have inbuilt multipin ion generator (+- 10^6) pins along with ultrasonic radio frequency waves for pest repellancy. The UV-C lamp will be a low-pressure mercury type and of such intensity as to provide minimum performance as listed below.
The UV-C lamp will produce only Germicidal UV (by definition this means 99.99% UV-C energy).The cell will have built in LED indication system stating the operation of the 3 technologies the UV lamp, ionizer and pest repellant. The power / control cabling between the Pentagon units and the power source / controls shall be included in the cost .The system shall be capable of reducing microbial bacteria, Covid 19 virus,virus and spores , VoC9, odors and particulates matter. The equipment shall conform to CE and ROHS. Standards certifications shall be submitted along with the technical submital. The Pentagon cells Duct Mounted AOP with UVC Lamp System for following Air Flow's Upto 6500 CFM
8
81123
648984
... More
Under Deck Insulation
Providing & Fixing Underdeck Insulation with 50 mm thick TF Quality EPS of Density 20 Kg/M3 fixed to slab with good quality Black CPRX Compound. 28Gwirenet shall be tightened arround insulation so as avoid any kind of sagging, Ends of net shall be overlapping at least 25mm. Overlaps shall be screwed with galvanized screws to avoid rusting : Make: Beardsell,Llyod
365
554
202210
... More
ELECTRICAL SERVICES
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring fan point with sheet metal fan box
61
1210
73822.81
... More
Wiring light point
473
762
360648.31
... More
Wiring call-bell point
1
744
744.03
... More
Wiring 3 pin 6 Amp. wall socket point
78
618
48276.54
... More
Wiring 3 Pin 6 Amp. Plug control comprising wall socket point
80
371
29708.8
... More
Wiring 3 pin 16/20 amp. power plug control point
496
478
237102.88
... More
Wiring light point without control switch.
61
334
20403.89
... More
Wiring light point with double control switches.
16
1326
21217.44
... More
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).
4
707
2831.8
... More
SUPPLY AND ERECTION OF WIRING ACCESSORIES:
Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- Ceiling Rose (Flush Piano type)
29
36
1054.15
... More
Call Bell 220/230 volts AC Ding Dong
1
132
132.06
... More
LED'S FIXTURES & FANS:
Supply and erection of Slim Recessed/Surface mounted, Round downlighter 12 watt with Pressure die cast aluminium housing & polycarbonate diffuser with surge protection 10KV and efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 %, housing & driver shall be of same brand, supported with LM 79 reports not more than 2 years old from NABL /UL accredited laboratory complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. The certification and specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
55
819
45045
... More
Supply and erection of Slim Recessed/Surface mounted, Round downlighter 18 watt with Pressure die cast aluminium housing & polycarbonate diffuser with surge protection 10KV and efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 %, housing & driver shall be of same brand, supported with LM 79 reports not more than 2 years old from NABL /UL accredited laboratory complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. The certification and specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
125
1071
133875
... More
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
7
618
4326
... More
Supply and erection of LED batten 40 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
300
814
244200
... More
Supply and erection of Recessed mounted 36watt LED panel (including LED driver) with CRCA sheet having efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
16
2734
43744
... More
Supply and erection of Linear Suspended mounted 28/30watt LED panel (including LED driver) with CRCA sheet having efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
12
4305
51660
... More
Supply and erection of BEE 3-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 210 CMM (approx.). The rated speed of the the product must be minimum of 300 revolutions per minute and 5Nos. of speeds. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.
57
3564
203148
... More
Supply and erection of AC Ceiling Fan 1400mm (56") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.
4
3464
13856
... More
Supply and erection of Wall Fan Plastic Body 400MM, 16" including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
10
3428
34280
... More
Supply and erection of Wall mounted Air Circulation Fan 750MM Sweep including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
2
13201
26402
... More
Supply and erection of Heavy duty Exhaust Fan 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
29
4890
141810
... More
OCCUPANCY SENSORS:
Supply and erection of Ceiling mounted Occupancy based PIR sensor (360 degree)with installation height 2.5mts ,8.5 Amps resistive load, Detection dia 8M,time delay - 5s to 59 mins , Light level threshold - 5 to 1275 Lux ,IP - 20,Sensitivity Adjustment, Walk LED test, with additional options like walkthrough, daylight set point, vacancy .
29
3614
104806
... More
SUSPENSION RODS FOR CEILING FANS:
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan.
25
131
3292.25
... More
CONDUIT PIPE & COPPER WIRES: PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
Heavy gauge PVC conduit pipe 20mm dia. (ISI marked) Flushed
1230
60
74378.1
... More
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
410
70
29028
... More
Heavy gauge PVC conduit pipe 32mm dia. (ISI marked) Flushed
90
97
8760.6
... More
Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed
1220
128
156550.4
... More
PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1sq.mm (Un-sheathed)
3700
19
70929
... More
Overall size 1.5sq.mm (Un-sheathed)
100
24
2465
... More
Overall size 2.5sq.mm (Un-sheathed)
1990
36
73590.2
... More
Overall size 4sq.mm (Un-sheathed)
3980
53
212571.8
... More
Overall size 6sq.mm (Un-sheathed)
1240
73
91710.4
... More
Overall size 10sq.mm (Un-sheathed)
3890
120
468822.8
... More
Overall size 16sq.mm (Un-sheathed)
2920
187
547879.6
... More
Overall size 25sq.mm (Un-sheathed)
360
295
106495.2
... More
SUB DISTRIBUTION SYSTEM:
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
TP&N Vertical Double Door Distribution Board 4 way each.
9
6766
60897.33
... More
TP&N Vertical Double Door Distribution Board 8 way each.
15
8518
127773.45
... More
Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-
.Cable End Box for TPN Vertical 4/8/12Way
24
1802
43255.92
... More
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 6-32amp. (10kA, Curve-C)
396
190
75469.68
... More
MCB Four Pole 40amp. (10kA, Curve-C)
12
1531
18380.88
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
12
1750
21009.12
... More
TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB upto 125amp)
2
9669
19338.36
... More
MAIN DISTRIBUTION SYSTEM:
MAIN VERTICAL DISTRIBUTION BOARD (EMERGENCY): TPN 4Way to feed MCB DB's (EMERGENCY LOAD) ON GROUND FLOOR
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-MCCB Four Pole 100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
2
6626
13253.46
... More
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Triple Pole 40amp. (10kA, Curve-C)
8
1188
9511.84
... More
MCB Triple Pole 63amp. (10kA, Curve-C)
8
1325
10604.08
... More
RISING MAIN: (IN ELECTRICAL ROOM)
UPS RISING MAIN:
Supply, Installing testing and commissioning of 200A, 25KA Air Insulated Type Rising Mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos. aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every meter, continuous earthing with 2 Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required complete in all respects as approved and desired by the Engineer-in-charge at site.
7
5860
41020
... More
Supply, installation, testing & commisioning of 160 Amp Main End Feed Unit Box (with provision of MCCB but without MCCB )on the existing Air Insulated rising mains for use on 3 phase 4 wire 415 V, 50Hz A.C supply with Flange End, Rotary Handel, box made with 1.6mm thick G.I sheet steel enclosure (IP54) duly powder coated complete in all respects as approved and desired by the Engineer-in-charge at site.
1
8403
8403
... More
EMERGENCY & UPS RISING MAIN:
Supply, Installing testing and commissioning of 200A, 25KA Air Insulated Type Rising Mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos. aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every meter, continuous earthing with 2 Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required complete in all respects as approved and desired by the Engineer-in-charge at site.
7
5860
41020
... More
Supply, installation, testing & commisioning of 200 Amp Main End Feed Unit Box (with provision of MCCB but without MCCB )on the existing Air Insulated rising mains for use on 3 phase 4 wire 415 V, 50Hz A.C supply with Flange End, Rotary Handel, box made with 1.6mm thick G.I sheet steel enclosure (IP54) duly powder coated complete in all respects as approved and desired by the Engineer-in-charge at site.
1
9383
9383
... More
NORMAL RISING MAIN:
Supply, Installing testing and commissioning of 300A, 25KA Air Insulated Type Rising Mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos. aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every meter, continuous earthing with 2 Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required complete in all respects as approved and desired by the Engineer-in-charge at site.
7
6789
47523
... More
Supply, installation, testing & commisioning of 250 Amp Main End Feed Unit Box (with provision of MCCB but without MCCB )on the existing Air Insulated rising mains for use on 3 phase 4 wire 415 V, 50Hz A.C supply with Flange End, Rotary Handel, box made with 1.6mm thick G.I sheet steel enclosure (IP54) duly powder coated complete in all respects as approved and desired by the Engineer-in-charge at site.
1
10708
10708
... More
Supply, installation, of Tap off box for with provision of MCCB Four Pole 40-63Amp. (Excluding MCCB Cost) complete in all respects as approved and desired by the Engineer-in-charge at site.
14
5257
73598
... More
Supply, installation, of Tap off box for with provision of MCCB Four Pole 80-100Amp. (Excluding MCCB Cost) complete in all respects as approved and desired by the Engineer-in-charge at site.
4
5701
22804
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
MCCB Four Pole 40amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
8
6626
53013.84
... More
MCCB Four Pole 63amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
6
6626
39760.38
... More
MCCB Four Pole 80-100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
4
6626
26506.92
... More
MCCB Four Pole 160amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
10142
10142.89
... More
MCCB Four Pole 200amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
13982
13982.05
... More
MCCB Four Pole 250amp., 415volts, ≥36kA Microprocessor Based Adjustable Thermal and Magnetic Setting
1
26024
26024.61
... More
Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
PVC flexible pipe 40mm dia.
48
34
1668.96
... More
Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe complete with as required:- PVC compression Socket gland 40mm dia.
48
32
1567.68
... More
INDOOR LT PANELS:
LT PANELS & MCCB's (MOULDED CASE CIRCUIT BREAKERS):
Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).
Fabrication: Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.
Painting: The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work . Busbars: The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:-
LT Panel enclosure having space for 1No. Incomer MCCB 630Amp. and 6Nos. outgoing MCCB's 40amp. to 250amp. (Option: MCCB 200-250amp.= 2Nos. and MCCB's 40-100amp.= 4Nos.) according to the requirement at site (Approx. size 1475 x 1800 x 400mm) (DETAIL SEE IN PANEL INVENTORY)
1
115898
115898.12
... More
LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 8Nos. outgoing MCCB's 40amp. to 160amp. according to the requirement at site (Approx. size 1750 x 1750 x 400mm) (DETAIL SEE IN PANEL INVENTORY)
1
128637
128637.3
... More
LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 4Nos. outgoing MCCB's 100amp. to 160amp. according to the requirement at site (Approx. size 2025 x 1100 x 400mm) (DETAIL SEE IN PANEL INVENTORY)
1
93258
93258.35
... More
LT Panel enclosure having space for 1No. Incomer MCCB 630Amp. and 6Nos. outgoing MCCB's 40amp. to 250amp. (Option: MCCB 200-250amp.= 2Nos. and MCCB's 40-100amp.= 4Nos.) according to the requirement at site (Approx. size 1475 x 1800 x 400mm) (DETAIL SEE IN PANEL INVENTORY)
1
115898
115898.12
... More
LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 4Nos. outgoing MCCB's 100amp. to 160amp. according to the requirement at site (Approx. size 2025 x 1100 x 400mm) (DETAIL SEE IN PANEL INVENTORY)
1
93258
93258.35
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc
MCCB Four Pole 40/63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
8
7744
61957.6
... More
MCCB Four Pole 160amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
11260
11260.86
... More
MCCB Four Pole 200amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
5
13982
69910.25
... More
MCCB Four Pole 250amp., 415volts, ≥36kA Microprocessor Based Adjustable Thermal and Magnetic Setting
5
26024
130123.05
... More
MCCB Four Pole 400amp., 415volts, ≥36kA Microprocessor Based Adjustable Thermal and Magnetic Setting
6
35251
211509.48
... More
MCCB Four Pole 630amp., 415volts, ≥36kA Microprocessor Based Adjustable Thermal and Magnetic Setting
2
38376
76753.8
... More
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Four Pole 50, 63amp. (10kA, Curve-C)
12
1750
21009.12
... More
ON LOAD CHANGEOVER SWITCH (Without Sheet Enclosure):
Supply and erection of On Load Change over Switch with advance neutral UNIT (Panel mounting Cubical type) in the existing Cubical Panel Confirms to IS 13947 (Part-3) complete with G.I. Bolts, Nuts & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-
On Load Change Over Switch Four Pole 400amp., 415volts
1
25352
25352.58
... More
X-RAY ROOM (FOR X-RAY MACHINE):
MS SHEET ENCLOSURE FOR MCCB's:
Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:- (For X-Ray Room)
MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm)
1
3342
3342.12
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- (For X-Ray Room
MCCB Four Pole 63amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
6626
6626.73
... More
COPPER EARTHING 8SWG :- Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
3
11144
33433.02
... More
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)
60
343
20619
... More
COPPER EARTHING :-
(Upto 14 metre in Length):-Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
14
18663
261287.32
... More
Earthing with 25mm x 3mm Copper Tape (upto 14Metre in Length)
4
20321
81284.68
... More
COPPER EARTHING STRIP (As Additional Length):
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
Additional Length 20mm x 3mm thick Copper Tape .
280
517
144953.2
... More
Additional Length 25mm x 3mm thick Copper Tape .
80
637
50972.8
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
Overall size 6sq.mm (2Core) Un-armoured (Loose)
100
65
6584
... More
Overall size 16sq.mm (4 Core) Un-armoured (Loose)
200
131
26338
... More
Overall size 35sq.mm (3½ Core) Un-armoured (Loose)
200
204
40824
... More
Overall size 95sq.mm (3½ Core) Un-armoured (Loose)
200
453
90602
... More
Overall size 120sq.mm (3½ Core) Un-armoured (Loose)
400
586
234404
... More
Overall size 150sq.mm (3½ Core) Un-armoured (Loose)
150
696
104494.5
... More
Overall size 240sq.mm (3½ Core) Un-armoured (Loose)
200
1114
222816
... More
CABLE TRAY:
Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-
Cable Tray Size 300mm x 50mm x 50mm (2mm thick)
10
1455
14557.3
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
Double walled corrugated (DWC) HDPE pipe 63/51 mm (outer/ inner dia.)
440
122
53772.4
... More
Double Walled Corrugated HDPE Pipe 90/76mm (Outer/ Inner dia.)
160
165
26464
... More
Double walled corrugated (DWC) HDPE pipe120/103.50mm (outer/ inner dia.)
495
257
127239.75
... More
Double Walled Corrugated HDPE Pipe 160/ 136mm (Outer/ Inner dia.)
255
307
78443.1
... More
Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections:-
Brass Gland for Aluminium cable 2/3/4 Core size 6sq.mm
6
77
462.72
... More
Brass Gland for Aluminium cable 2/3/4 Core size 16sq.mm
6
130
781.26
... More
Brass Gland for Aluminium cable 2/3/3½/4 Core size 25-35sq.mm
6
144
864.72
... More
Brass Gland for Aluminium cable 3/3½/4 Core size 95-120sq.mm
12
251
3018.96
... More
Brass Gland for Aluminium cable 3/3½/4 Core size 150sq.mm
8
293
2346.32
... More
Brass Gland for Aluminium cable 3/3½/4 Core size 240sq.mm
8
450
3600.48
... More
Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-
Aluminium thimble cable Core size 4 - 6sq.mm
20
13
274
... More
Aluminium thimble cable Core size 10 -16sq.mm
20
14
295
... More
Aluminium thimble cable Core size 25 -35sq.mm
20
17
358.2
... More
Aluminium thimble cable Core size 50sq.mm
10
28
284.4
... More
Aluminium thimble cable Core size 70sq.mm
10
31
316.1
... More
Aluminium thimble cable Core size 95sq.mm
20
36
737.4
... More
Aluminium thimble cable Core size 120sq.mm
20
45
906
... More
Aluminium thimble cable Core size 150sq.mm
10
54
547.8
... More
Aluminium thimble cable Core size 240sq.mm
20
105
2107
... More
Supply and erection of heavy duty Copper thimbles/lugs for cable end termination duly crimped including making necessary connections etc. completely:-
Copper thimble cable Core size 4 - 6sq.mm
180
21
3925.8
... More
Copper thimble cable Core size 10 - 16sq.mm
180
26
4797
... More
Providing and fixing of 4.5 Kg. Capacity FIRE EXTINGUISHER,CO2 type as per IS:15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect
4
7150
28600.76
... More
Providing and fixing of 6 Kg. Capacity FIRE EXTINGUISHER, ABC Powder type (stored pressure) asper IS:15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect
4
2940
11761.2
... More
Supply, erection, testing & commisioning of Early Streamer Emission (ESE) type Lightning Protection Complete with Lightning Air Terminal. The System should be corrosion resistant stainless steel chrome body capable of working in hazardous atmosphere and protecting against direct Lightning point as well conducting /diverting it to earth completely after tracing the Lightning in advance. As per NF C 17-102:2011 the air terminal should be tested for Lightning impulse current (10/350 micro sec) =100 KA and for local certification the air terminal should be tested for switching impulse current of 40 KA (8/20 micro sec) as per CPRI with 5 positive and 5 negative impulse. The ESE Terminals shall offer a protection radius of 79mtr., Level-1 High Protection and preferably to be mounted on roof top and center of the building / blocks with the highly insulated polyplastic adaptor with the Mast. (Its working principle evolves from local electrostatic field that develops naturally around the system as a thunderstorm begins to gather. In the event of descending lightning, an inbuilt triggering device generates high tension pulses at the conductor tip, causing a ‘corona effect’.) Protection radius of 79Mtr at level 1 & 107 Mtr at level 4
1
87666
87666
... More
Supply and fixing of GI Mast 5 mtr. height along with suitable base plate for mounting the terminal along with highly insulated adopter to mount ESE Air Terminal with the Mast.The Adapter shall have suitable Metal connector /Connecting point in such a way the top portion shall be electrically connected to the central tip of the ESE terminal and bottom portion connected to the down conducto, stray wires along with support shall be securely fixed with base plate and gauge wires where ever required.
1
11964
11964
... More
Supply and installation of Lightning Strike Counter (6 digit display) of non-resettable (electromechanical) type which allows the automatic counting of the strikes received by the lightning protection system. This information is used to enhance lightning protection security & increase the effectiveness of inspection & maintenance procedures. It should be in IP-65 enclosure with minimum sensitivity of 1KA and maximum capacity 100KA. No external power source is required. It should be installed always 2 mtrs. above the ground level.
1
10794
10794
... More
Supply & erection of test Link of non-corroding, weather proof, water proof polycarbonate IP 65/55 enclosure including providing of 2 Nos. of insulated supports with suitable holes prefitted nuts & bolts to fix the down conductor & earth wire. The transparent cover fitted at approximately 500-1000mm from ground level shall be provided on each down conductor.
1
2915
2915
... More
Supply, installation & testing of chemical earthing (Maintenance Free Earthing) system with UL approved copper bonded rod and exothermically welded copper busbar both tested by CPRI at 50kA Fault Current. A copper bonded steel rod shall have 3000 mm length and 17.2 mm dia. with copper coating thickness of minimum 250 microns. Along with earth enhancement compound tested by ROHS complying IEC 62561-7 in a sealed bag of minimum 50 kg (25 kg Bag x 2). A copper clad steel solid ground wire of 8 mm dia. for interconnecting earth pits. Each earth pit shall be covered with heavy duty weather proof environment friendly polyplastic earth pit chamber. The grounding minerals should not be pollute the ground water. The grounding minerals shall be tested & certified for the resistivity of less than 0.12 ohm-mtr.
3
11550
34650
... More
Cost of pole foundation with earth work in excavation in foundations trenches etc. 0.25 meter below ground level, Cement Concrete 1:4:8 with stone ballast, Reinforced cement concrete M-20,Cold twisted deformed (Ribbed/tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008 complete in all respect as desired by engineer in charge.
4
2848
11395.28
... More
PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge
Overall size 70sq.mm (Un-sheathed) (Conductor connected the air terminal to earthing)
90
801
72107.1
... More
Providing EPABX System:
Supply, installtion, testing & commisioning of the Switching system of the EPABX should be designed with IP at the core allowing fully distributed IP solutions across data networks in 19” Rack Mountable,7 universal slots in single Node and should support card Analog Extension Card , Digital Extension Card , for the respective addition / expansion. Analog & Digital extensions can be increased in the steps of 8, 16 & 32 Ports.Analog Trunks , PRI, BRI Trunks, E1 & SIP Trunks . Single card/module should support 2 or more PRIs, It should support 100% IP or 100 % TDM or a hybrid of IP/TDM technologies. The system should support IP Communication Devices (wired and wireless) e.g. IP Phones (Hard and Soft phones), Mobile IP Phones, multimedia PCs, SIP phones, Video phones (Hard & soft), etc.1.3. The system should also support Legacy TDM communication devices (Digital and analog 2 Wire telephone instruments with or without caller-id (Both FSK and DTMF), Fax, modems, ISDN phones etc. 1.6. The proposed system should support direct SIP integration with Microsoft Lync 2013 including following. Vendor should provide proper document towards certification with Microsoft Lync 2013 integration.1.16. The system should support at least 228 analog extensions in a single node and up to 600 analog Extensions in multiples nodes,at least 400 Digital Phones in a single node and 600 digital phones in multiple node,support at least 600 SIP extensions in a single node,Support 600 DECT/SIP DECT phones.support at least 224 DECT base stations and over 4000 SIP-DECT Base stations.should support minimum 56 Analog Trunks ,56 ISDN BRI trunks,14 PRI Trunks.Fax over IP with T.38 Interface and should support minimum 140 channels.240 SIP access channels.1.26. The system should have in-built Auto Attendant and 2 Port Voice Mail, Direct Inward System Access (DISA), Direct Outward System Access (DOSA) & Music On Hold (MOH). The system should be communication server should be on Leaders of Gartner Magic Quadrant. The OEM should be present globally minimum 70-75 countries. EPABX/Server, Digital Phone, IP Phone, cloud server must be from same OEM. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 15 years experience with same OEM & have already maintained services minimum 18-20 EPABX system in Punjab region. complete in all respect as per satisfaction of the Engineer in charge of the work.
1
159744
159744
... More
Supply, installtion, testing & commisioning of card 08 PNT Line (backup Lines) complete in all respect as per satisfaction of the Engineer in charge of the work.
1
41013
41013
... More
Supply, installtion, testing & commisioning of card 32 Analog Extensions complete in all respect as per satisfaction of the Engineer in charge of the work.
2
69746
139492
... More
Supply Installation Testing and Commissioning of the Sip Extension with its license for IP telephones complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.
6
3939
23634
... More
Supply Installation Testing and Commissioning of SIP Phone Up to 2 lines on dedicated line keys with LEDs 3 programmable keys that come pre-programmed and labeled with default values (Callers, Redial and Transfer) 4-way navigation with Select/OK key Dedicated function keys, including Transfer, Callers List, Hold, Redial, Goodbye, Options, 2 volume keys, Mute (with LED) and Speaker (with LED) Audio and Codecs,Hi-Q Audio . (HAC) handset,Full-duplex quality speakerphone,Wideband handset and speakerphone, Codecs: G.711 μ-law / A-law, G.729, G.722, AMR*, AMR-WB(G.722.2)*, G.726, iLBC, BV16, BV32, L16,Echo cancellation,Comfort noise utilization, Packet loss, concealment, Monochrome LCD ,2.75” 128x48 pixel graphical displa LED for call and message waiting indication,Security User and administrator level passwords for login Encryption of configuration files, HTTPS configuration downloaded and web managementPhone lock with PIN,Digest Authentication,Transport Layer Security (TLS), Secure Real-Time Protocol (SRTP),XML API Capabilities,RTP Streaming Control, CTI applications Dual 10/100 Mbps Ethernet ports with hardware based Ethernet switch Manual or Dynamic Host Configuration Protocol (DHCP) IP address setup Support of multiple DHCP options: 2, 12, 42, 43, 60, 66, 77, 120, 132, 159, 160 Time and date synchronization using SNTP, Quality of Service support – IEEE 802.1 p/Q VLAN and priority tagging, Type of Service (TOS), and Differentiated Services Codae Point Integrated HTTP/HTTPS server for web administration and maintenance including a built-in troubleshooting sectionMass deployment via central provisioning of user configuration files – TFTP, FTP, HTTP, HTTPSTR-069 support,PoE Class 1 Level “V” energy efficiency rated power adapters available complete in all respects as approved and desired by the Engineer-in-charge at site.
6
7275
43650
... More
Supply Installation Testing and Commissioning & Laying of Cat 6 Cable in existing conduit Category 6 Unshielded Twisted Pair 23 AWG:305mtr. ,4 pair 100W cable shall be compliant with ANSI/TIA/EIA-568-C.2 Additional Transmission Performance Specifications for 4-pair 100W Category 6Cabling. Tested upto 600 MHZ; Construction: 4 twisted pairs separated by internal X shaped, 4 channel, polymer spine / full separator. Half shall not be accepted.Sheath : FRPVC/LSZH,Outer Diameter 6.1 mm nominal;Temperature Range -20° to +60°C.Manufacturer should have ISO 9001:2008 Certification for Quality Management System.Manufacturer should have ISO 14001:2004 Certification for Environmental Management System.All UTP and Its Components should be from same OEM. complete in all respects as approved and desired by the Engineer-in-charge at site.
200
50
10000
... More
Supply Installation Testing and Commissioning of L2+ Managed Industrial Grade POE Switch 10 Ports Gigabit Managed Industrial Grade POE Switch , 8 10/100/1000 Base- TX portand 2 Gigabit SFP slotand 1console port Network Protocols: Support , IEEE802.3, IEEE802.3u, IEEE802.3z , IEEE802.3ab , IEEE802.3x , IEEE802.1d , IEEE802.1w , support IP camera All Make : Netgear, Cisco. Mountxross,allied telesis, should Working temperature:-40～75℃ Storage temperature:-40～85℃, Relative Humidity : 5%~95% (no condensation), Shell : IP30 protectgrade, metal shell Installation : DIN- Railor Wallmounts, MTBF : 300,000 hours , Make : Netgear, Cisco. Mountxross,allied telesis Support L2+ Switching features including 802.1Q VLAN, Mirroring, Portisolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACL setc. Support spanning tree STP(802.1D) and RSTP(802.1W).802.1s(MSTP) way exchange time 50ms Jumbo frames support upto 9.6 Kkilobytes Support enhanced managemen through WEB,CLI, TELNET, SSH, SNMP Ethernet port support 10/100/1000 Mself-adaption.Bandwidth: 24Gbps, Packet Buffer Memory: 4M Packet Forwarding Rate:1488000 pps /port Address Table : 8K complete in all respects as approved and desired by the Engineer-in-charge at site.
1
45138
45138
... More
Supply Installation Testing and Commissioning of Analog phone with caller id and hand free facility complete in all respects as approved and desired by the Engineer-in-charge at site.
30
1228
36840
... More
Supply Installation Testing and Commissioning of 20 Pair DB with Original Krone Module lock & key facility complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.
4
12378
49512
... More
Supply Installation Testing and Commissioning of 50 Pair MDF with Krone for EPBAX side with Original Krone Module lock & key facility complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.
1
22198
22198
... More
Supply, Installation Testing and commissioning of unarmoured 2 Pair 0.5 sq. mm copper conductor PVC insulated Cable for Telephones in existing Conduit complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.
600
32
19200
... More
Supply, Installation Testing and commissioning of armoured 20 Pair 0.5mm ABC conductor PVC insulated FRLS Cable for Telephones in existing Conduit complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.
300
291
87300
... More
Supply, Installation, Testing & Commissioning of 1 KVA UPS with Input power factor - 0.99, Output power factor - 0.8, OVCD inbuilt , DC V 36v, Efficiency : Above 90% complete in all respects as approved and desired by the Engineer in-charge at site.
1
11585
11585
... More
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
Wiring Telephone socket point RJ11 (one module)
30
355
10657.2
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
450
70
31860
... More
Providing Networking System along with allied accessories:
Supply, Installation and Comissioning of Distribution Switch with minimum usable 24 10/100/1000BASE-T ports, 2 10GBASE-T ports , 4 10G SFP+ ports L3 Stackable Managed Switch with Redundant Power Supply Support.1 x RJ45 console port, RJ-45 port for out-of band-management port for accessing the CLI of the switch and USB port. 168 Gbps Switching capacity or higher or non-blocking architecture. 64 Bytes packet forwarding rate should be 125 Mpps or higher. Switch MAC table should be at least 16K or higher. Physical Stacking up to 9 units per stack. Stacking bandwidth up to 80G and up to 32 devices per virtual stack. Should have 802.1D STP, 802.1w RSTP and 802.1s MSTP Spanning Tree Protocol and ERPS as per standard ITU-T G.8032. BPDU Filter, BPDU restriction, Root restrction. Loopback detection (LBD). IGMP Snooping v1/V2/V3 & IGMP groups 1K or more IGMP groups and require support for IGMP Snooping Fast Leave. MLD Snooping v1/v2 & MLD group 1K or more and require support for MLD Snooping Querier. 16 L3 IP interfaces and IPv4/IPv6 Loopback interface. IPv6 Neighbor Discovery (ND). VRRPv3, Equal-Cost Multi-Path (ECMP) and UDP helper. Static route for both IPv4 and IPv6, OSPFv1, v2 & v3, RIP V1/V2/ng. Should have Policy-based Route (PBR). IEEE 802.1Q VLAN with different type of VLAN like Port based, Voice VLAN, Private, Double (Q-In-Q), Multicast VLAN (ISM VLAN for IPv4/IPv6), 802.1v Protocol VLAN ,VLAN Trunking. should have per-port broadcast, multicast, and unicast storm control to prevents faulty end stations from degrading overall systems performance. port security to secures the access port based on MAC address. Require prevention of DoS attacks, which include Land, Blat, TCP Null Scan, TCP Xmas Scan, TCP SYNFIN, Ping of Death Attack and TCP Tiny Fragment attack. DHCP snooping and DHCP server screening, DHCP server. 802.1X port based and 802.1X host based access control, Identity-driven Policy (VLAN, ACL or QoS) Assignment. RADIUS and TACACS+ authentication. Authentication database failover. QoS (quality of service) IEEE 802.1P for traffic prioritization. 8 queues per port. Different type of QoS priority like Strict Priority Queue and Weighted Round Robin, Strict + WRR, Congestion control using Weighted Random Early Detection (WRED) or WTD. Remark 802.1p priority, Remark ToS/DSCP and Rate limiting in Policy map. Support at least 2K ingress & 512 egress access control entries. ACL based on MAC, IPv4 and IPv6, TCP/UDP port number, User-defined packet contentm, CPU Interface Filtering. Able to manage trough Web-GUI, Fully functional CLI interface and Telnet. Should have multiple Image and configuration support to reduced down time for the switches. sFlow for monitoring traffic in data networks, SNMP v1, v2c, v3 and SNMP Traps and RMON. Support for DHCP Client support for IPv4/IPv6, DHCP server, DHCP Relay and DNS client. Should have SNTP/NTP protocol for time synchronization. CDP/UDLD, Link Layer Discovery Protocol (LLDP) and LLDP-MED.. CDP/UDLD, Link Layer Discovery Protocol (LLDP) and LLDP-MED. Operating temperature should be 0 to 50 ˚C. Switch should be EMI Certificates FCC, CE and Safety Certifications cUL/UL, CB. All Switches, Wireless and its Networkiing Components from Same OEM. OEM Should be International certification for the ISO 45001 Health and Safety Management System, Information Security Management System: ISO 27001, ISO 9001 Quality Management System, ISO 14001 Environmental Management System, and ISO 14064-1 Greenhouse Gas Inventory Standards. OEM should have Indian based operation at least for a period of 20+ years and should have an Annual Turnover of Rs. 500 Crores and above in any of last three consecutive Audited Financial years. (To ensure only principal networking companies participate having strong Product , Support and Service.) complete in all respect as per satisfaction of the Engineer in charge of the work.
2
134395
268790
... More
Supply, Installation and Comissioning of CAT 6 Cable should be Unshielded twisted pair cabling system, TIA / EIA 568-C.2 Category 6 Cabling system.Conductors should be 23 AWG solid bare copper.Netowork support should be ultrahigh speed data networks such as Gigabit Ethernet (1000 Base-T and 1000 Base-TX) and beyond.Cable Should be ETL/UL Certificates are mandatory.Frequency tested up to should be 600 MHz minimum.Impedance should be 100 Ohms + / - 15 ohms.Box Packing shoud be 305M.Should be 25-year systems warranty; Warranty to cover Bandwidth of the specified and installed cabling system, and the installation costs. Site certificate Should be issued by OEM.Should be RoHS compliant. complete in all respect as per satisfaction of the Engineer in charge of the work.
550
50
27500
... More
Supply, Installation and Comissioning of Patch Panel should be made of cold rolled steel.Should conform to TIA / EIA 568-C.2 Component Compliant.Should terminate 24 UTP CAT 6 (4 pair) Cables.Should confirm to EIA/TIA 568A wiring Pattern.Each port Should be features the spring-loaded shutter.Should be prevents incomplete mating Should be protects from dust and contaminants.Should be Front and rear port labelling as well as panel identification label.Should be Integral cable management shelf ensures bend radius compliance.Operating Life should be minimum 750 insertion cycles.Should be RoHS compliant.complete in all respect as per satisfaction of the Engineer in charge of the work.
2
8179
16358
... More
Supply, Installation and Comissioning of Patch Cord 1 Mtr Patch cord Should be 4 Pairs 24 AWG copper cables.The Outer Jacket should be Low Smoke Zero Halogen.24 AWG stranded bare copper.Operating temperature range should be -20°C to 60°C.Should minimum comply with proposed ANSI/TIA/EIA-568-C.2.Should be verified by ETL (ETL certificate to be enclosed with the Bid)UL listed (UL certificate to be provided along with the Bid)Should Have cross separator.Standard length should be available 0.5M to 10M.Should be RoHS compliant. complete in all respect as per satisfaction of the Engineer in charge of the work.
48
183
8784
... More
Supply, Installation and Comissioning of atch Cord 2 Mtr. Patch cord Should be 4 Pairs 24 AWG copper cables.The Outer Jacket should be Low Smoke Zero Halogen.24 AWG stranded bare copper.Operating temperature range should be -20°C to 60°C.Should minimum comply with proposed ANSI/TIA/EIA-568-C.2.Should be verified by ETL (ETL certificate to be enclosed with the Bid)UL listed (UL certificate to be provided along with the Bid)Should Have cross separator.Standard length should be available 0.5M to 10M.Should be RoHS compliant complete in all respect as per satisfaction of the Engineer in charge of the work.
30
208
6240
... More
Supply, Installation, Testing and Commissioning of Wall Mount 15U x 600 W x 600 D ,Front Glass Door (tinted,Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails with U-Marking , Welded Side Walls, Min Accessories : 1U Cable Manager (1), Hardware Packet (1 Pkt), 6 Socket 5 Amp. Power Distribution Unit (1 No), Roof Mounted Fan Unit / 90 CFM /230V AC.as per DIN 41494 Standards complete in all respect as per satisfaction of the Engineer in charge of the work.
2
11706
23412
... More
Supply, Installation, Testing & Commissioning of 1 KVA UPS with Input power factor - 0.99, Output power factor - 0.8, OVCD inbuilt , DC V 36v, Efficiency : Above 90% complete in all respects as approved and desired by the Engineer in-charge at site.
2
13597
27194
... More
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
Wiring Networking socket point RJ45 (one module)
30
461
13842.9
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
450
70
31860
... More
Supply, erection, testing & commissioning of IP indoor Camera Image Sensor 1/2.8" SONY Starvis Back-illuminated CMOS Sensor Resolution 2MP 1080 P Effective Pixels 1945(H)*1097 (V) Compression H.264/H.264+/H.265/H.265+/ JPEG/AVI /MJPEGTV System PAL/NTSC Electronic Shutter Time Auto: PAL 1/25-1/10000 Sec; NTSC 1/30-1/10000 Sec Minimun Illumination 0.005Lux S/N Ratio≥52dB Scanning System Progressive Video Output Network Reset Button Optional Focus Length 2.7-13.5mm Motor Zoom Focus Control Auto Lens Type Auto Pixels 2MP Infrared LED No, Support Warm light LED 4000 K, up to 30m Infrared Distance IR Status Auto Control IR Power On Smart, Manual & Timed mode Ethernet RJ-45 (10/100Base-T) Protocol TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP ,PP PoE, NTP, SMTP, UDP, SNMP ON VIF Support ON VIF 19.12(Profile S/T/G)P2P YES, Support QR Code POE Optional, Support IEEE 802.3 af Video Delay 0.3S (Within the Lan) Main Stream 12304*1296@25fps, Main Stream 21920*1080@30fps, Main Stream 31280*720@30fps, Sub Stream 11280*720@30fps 720*480@30fps Sub Stream 2352*288@30fps Tri Stream1280*720@30fps 720*480@30fps 352*288@30fps IE Brower IE8-11, Google Chrome, Firefox , Mac Safari Smart Phone iPhone, iPad, Android, Android Pad Intelligent Analysis Face Detection, Intrusion Detetion, Line Cross Detetion, Loiter Detetion, People Gather Detecion, motion detection based on human detection Day/Night Color/ B&W (IR-CUT )Image Config Saturation /Brightness/Contrast /Sharpness, Mirror, 3D NR , White Balance, FLK (Flicker Control), Video Tampering, HLC, Distortion Full Stat light Corridor Pattern Defog Mode ROIBLC WDR HDR: 120dB Motion Detection Support Privacy Masking 3 Rectangular Zone Recording Mode NVR/CMS/ Web Audio Optional 1 Built-in MIC Alarm Optional 1 Channel Input / Ouput SD Card Slot Optional Internal, Support Max 512GB RS485 Housing Metal ,IP67 , Contactor shall off load the work to OEM & have its own registered office in Punjab for sale & support of product. Camera & NVR should be from same OEM. IR Cut Filter Operation Temperature-20℃ ~ +60℃ RH95% Max Storage Temperature-20℃ ~ +60℃ RH95% Max Power Source DC12V±10%, 1000mA Dimension￠128 x 108(H)mm. Camera Should be BIS certified. Awared company must have minimum 5 years work experiance in networking & CCTV. Also have completed the similar amount of awarded job.complete in all respect as per satisfaction of the Engineer in charge of the work.
18
20344
366192
... More
Supply, erection, testing & commissioning of 5MP Outdoor Face Detection IP Network Camera Image Sensor 1/2.8" SONY Starvis Back-illuminated CMOS sensor Resolution 5MP Effective Pixels 2616 (H)*1964 (V) Compression H.264/ H.264+/ H.265/ H.265+/ JPEG/ AVI /MJPEG TV System PAL/NTSC Electronic Shutter Time Auto: PAL 1/25-1/10000 Sec; NTSC 1/30-1/10000 Sec Minimun Illumination 0.01Lux S/N Ratio ≥52dB Scanning System Progressive Video Output Network Reset Button Optional Lens Focus Length 2.7-13.5mm Motor Zoom Focus Control Auto Lens Type Auto Pixels 4MP Night Vision Infrared LED No, Support Warm light LED 4000K, up to 40m IR Status Auto Control IR Power OnSmart, Manual & Timed mode Network Ethernet RJ-45 (10/100Base-T)Protocol TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP ,PPPoE, NTP, SMTP, UDP, SNMP ONVIF Support ONVIF 19.12 (Profile S/T/G)P2P YES, Support QR Code POE support, Support IEEE 802.3af Video Delay 0.3S (Within the Lan) Main Stream 12592*1944@30fp Main Stream 22560*1440@30fp Main Stream 31920*1080 @30fps 1280*720@30fps Sub Stream 11280*720@30fps720*480@30fps Sub Stream 2352*288@30fps Tri Stream 1280*720@30fps 720*480@30fps 352*288@ 30fps IE Brower IE8-11, Google Chrome, Firefox , Mac Safari Smart Phone iPhone, iPad, Android, Android Pad AI Function Intelligent Analysis Face Detection, Intrusion Detetion, Line Cross Detetion, Loiter Detetion, People Gather Detecion, motion detection based on human detection Day/Night Color/ B&W (IR-CUT ) Image Config Saturation/Brightness/Contrast /Sharpness, Mirror, 3D NR , White Balance, FLK(Flicker Control), IP camera should be compatible with network video recorder Video Tampering, HLC, Distortion Full Color Corridor Pattern Defog Mode ROIBLC WDR HDR: 120dB Motion Detection Privacy Masking 3 Rectangular Zone Recording Mode NVR/CMS/Web Interface Audio Optional 1 Built-in MIC Alarm Optional 1 Channel Input/Ouput SD card Support Max 512GB Housing Metal, IP67. Camera & NVR should be from same OEM. IR Cut Filter Operation Temperature-20℃ ~ +60℃ RH95% Max Storage Temperature-20℃ ~ +60℃ RH95% Max Power Source DC12V±10%, 1000 m A Dimension 268(W) x 95(H) x 88(D)mm. Camera Should be BIS certified as per satisfaction of the Engineer in charge of the work.
8
21271
170168
... More
Supply, erection, testing & commissioning of 36 CH NVR with Main Processor ARM Cortex A17 Quad-core Processor Operating System Embedded LINUX, Video Input 36CH (4000×3000, 3840×2160, 2592x1944, 2048x1536, 1920×1080, 1280×960, 1280×720, etc)Output 1 VGA, 2 HD, Audio Input 1 Port RCA Output 1 Port RCA (Linear, 1kΩ), Audio Bit Rate 64 kbps, Audio Compression standard AAC, G711u, G711a, ADPCM_DVI4 Intercom support (two-way) Motion Detection 36 Channel, MD Zones: 396 (22 × 18), Trigger Events Recording, Email, FTP, Snapshot, Buzzer and Screen Tips, alarm output Display HD Output 14K (3840 × 2160)/30Hz, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz HD, Output 21920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, VGA 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, Display Split 36CHxD1/ 36CHxD1/ 25CHxD1/ 16CHxD1/ 9CHxD1/ 4CHxD1/ 1CHx1080P/ 1CHx3MP/ 1CHx4MP/ 1CHx5MP/ 1CHx4k/ 1CHx12MP Digital Zoom YES, OSD Camera Title, Time, Recording, Motion Detection, Event Alarm Recording Video Compression H265/ H264/ H265+ /H264+ Resolution 12MP (4000×3000), 4k(3840×2160), 5MP(2592×1944), 4MP(2688×1520/2560×1440), 3MP(2048×1536), 1080P(1920×1080), 960P (1280x960), 720P(1280×720), D1 (720×576/ 720×480) Record Rate PAL:12MP@29×25fp, 4k@35×25fp, 5MP@58×25fp, 4MP@64x25fp, 3MP@64×25fp, 1080P@64×25fp, 960P@64×25fp, 720P@64×25fp, D1@64×25fp NTSC:12MP@29×30fp, 4k@35×30fp, 5MP@58×30fp, 4MP@36×30fp, 3MP@36×30fp, 1080P@36×30fp, 960P@36×30fp, 720P@36×30fp, D1@36×30fp, Record Mode Manual\ Timer\ Motion Detection\ Alarm Input\ Smart Event Local Sync Playback 36CH 12MP@15fps, 4CH 4K@30fps, 6CH 5MP@30fps, 8CH 4MP@30fps, 10CH 3M@30fps, 16CH 1080P@30fps, 16CH 960P@30fps, 16CH 720P@30fps, 16CH D1@30fps, Decode Capability 4CH 4K(3840×2160)@30fps,. NVR should compatable with cameras. Remote Sync Playback YES Search Mode ALL, Channel, Manual, Time, Date, Motion Detection, Event Alarm, Tag search Playback Functions Play, Pause, Stop, Rewind, Fast play, Slow Play, Full Screen, Frame Play ,Frame Rewind, Digital Zoom,tag, clip Backup Mode USB Device/ Network Network Interface 2 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interfaces Incoming Bandwidth 300MB Network Functions TCP/IP, HTTP, UPnP, DNS, NTP, SMTP, DHCP, FTP, DDNS, RTSP, RTCP, p2p, PP POE Onvif onvif S, onvif T Web Browser Edge, IE8-11, Google Chrome , Firefox , Safari CMS Software Support Windows 7/ Windows 8/ Windows 10/ MAC OS Cloud Support Yes Smart Phone iPhone, iPad, Android, Android Pad Interface Type 2 SATA Hard Disk Interface (3.5" SATA) Capacity Up to 16TB, capacity eSATA 1 eSATA.Contactor shall off load the work to OEM & have its own registered office in Punjab for sale & support of product. Camera & NVR should be from same OEM. interface Language UI English, Polish, Czech, Russian, Thai, Hebrew, Arabic, Bulgarian, German, French, Portuguese, Turkic, Spanish, Italian, Hungarian, Romanian, Korean, Dutch, Greek, Vietnamese USB Interface 2 USB 2.0 Interfaces ,1 USB 3.0 Interface RS485 2 Port Power Supply AC 115 to230V, 3A Working Environment-10~55℃/10~90% Dimension (W×D×H)2U, 440mm × 450mm×95mm Weight 9.8Kg (without HDD. NVR Should be BIS certified. Awared company must have minimum 5 years work experiance in networking & CCTV. Also have completed the similar amount of awarded job complete in all respects as approved and desired by the Engineer-in-charge at site.
1
74070
74070
... More
Supply, erection, testing & commissioning of L2+ Managed Industrial Grade POE Switch 10 Ports Gigabit Managed Industrial Grade POE Switch , 8 10/100/1000 Base- TX portand 2 Gigabit SFP slotand 1console port Network Protocols: Support , IEEE802.3, IEEE802.3u, IEEE802.3z , IEEE802.3ab , IEEE802.3x , IEEE802.1d , IEEE802.1w , support IP camera All Make. Netgear, Cisco. Mountxross, D link, should Working temperature:-40～75℃ Storage temperature:-40～85℃, Relative Humidity : 5%~95% (no condensation), Shell : IP30 protectgrade, metal shell Installation : DIN- Railor Wallmounts, MTBF : 300,000 hours , Support L2+ Switching features including 802.1Q VLAN, Mirroring, Portisolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACL setc. Support spanning tree STP(802.1D) and RSTP(802.1W).802.1s(MSTP) way exchange time 50ms Jumbo frames support upto 9.6 Kkilobytes Support enhanced managemen through WEB,CLI, TELNET, SSH, SNMP Ethernet port support 10/100/1000 Mself-adaption.Bandwidth: 24Gbps, Packet Buffer Memory: 4M Packet Forwarding Rate:1488000 pps /port Address Table : 8K complete in all respects as approved and desired by the Engineer-in-charge at site.
2
45138
90276
... More
Supply, erection, testing & commissioning of Access Switch 24 10/100/1000BASE-T PoE and 4 100/1000 Mbps GbE/SFP combo ports, IEEE 802.3az Energy Efficient Ethernet (EEE),IEEE 802.3x Flow Control, IEEE 802.3af/at compliance (for PoE ports),9K Jumbo frame,256 Multicast Groups,802.1W RSTP, 802.1s MSTP, IGMP Snooping, Loopback Detection, 802.3ad Link Aggregation, Auto Surveillance VLAN, 802.1p Quality of Service with 8 queues per port,Supports 4 IP interfaces,Min 124 static route entries, Min 768 ACL Rules, SSH, TLS,DoS attack prevention, 802.1X Port-based Access Control, Port Security, Cable diagnostics, Dual image, Dual configuration, NMS Bundled along with Switch,OEM Should be present in Gartner Magic Quadrant from past 5 Years complete in all respects as approved and desired by the Engineer-in-charge at site.
1
50282
50282
... More
Supply, Installation, Testing and Commissioning of Wall Mount 15U x 600 W x 600 D ,Front Glass Door (tinted,Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails with U-Marking , Welded Side Walls, Min Accessories : 1U Cable Manager (1), Hardware Packet (1 Pkt), 6 Socket 5 Amp. Power Distribution Unit (1 No), Roof Mounted Fan Unit / 90 CFM /230V AC.as per DIN 41494 Standards complete in all respect as per satisfaction of the Engineer in charge of the work.
2
11706
23412
... More
Supply, erection, testing & commissioning of HDD Formatted capacity 6 TB, Data transfer rate (max) Buffer to host Host to/from drive (sustained) 6 Gb/s 171 MB/s, Cache (MB) 64, Rotational speed (RPM) IntelliPower, Load/unload cycles4 300,000, Non-recoverable read errors per bits read 1 in 1014,Operating (2 ms, read/write) 30,Operating (2 ms, read) 65, Non-operating (2 ms) 250,Average power requirements (W) Read/Write 5.90, Idle 4.90, Standby and Sleep 0.40 complete in all respects as approved and desired by the Engineer in-charge at site.
3
22082
66246
... More
Supply, erection, testing & commissioning of Display : 50 inch, 4K (3,840 x 2,160), Direct LED, Professional Display with 4K Processor, Native Contrast ratio 5,000:1 or higher, Response time 12 ms or lower, Brightness 400 cd/m² or higher, 24/7, Portrait/Tilt functionality, HDMI Auto wake up, HTML5 platform, 16GB On Board Storage, HDMI*4 with HDCP 2.3 / RS232 / USB / RJ45 / Wi-Fi Direct / 20W Speakers / Android OS or similar, Viewing angle 178 degree, Apple AirPlay & Chromecast.complete in all respects as approved and desired by the Engineer-in-charge at site.
1
82027
82027
... More
Supply, Installation, Testing & Commissioning of Category 6 UTP, 4 Pair This cable well exceeds the requirements of TIA/EIA-568-C.2 and IEC/ISO 11801. Construction: 4 twisted pairs separated by cross separator, 4 channel, polymer spine / full separator. Half shall not be accepted, Operates at bandwidth of 250 MHz, Conductor Solid Bare Electronic Grade Copper. Inner jacket should be PVC and outer should be PE, suitable for direct burial. Insulation: Polyethylene, Attenuation ( 36 db/100m), Pair – to – pair and PS NEXT, ELFEXT and PSELFEXT, Return Loss, ACR and PS ACR., Nominal Outer Diameter of Cable should be 9.70 mm and Conductor Diameter 0.56 mm (23 AWG), Cable should support operating Temperature from -20° to +60°C, Cable should come with printed sequential Length Counter on each meter, Cable support Conductor Resistance 93.5 OHMS/1000MTR@20 Degree, Mutual Capacitance of cable should be 5.6nF/100m, Max Resistance Unbalance of cable should be 5% Max, Capacitance Unbalance of cable should max 330pF/100m, Cable support Delay Skew: 45nS, Operating Voltage: 72V and NVP: 69%, Shall Supports Gigabit Ethernet (1000 base-T) standard and Operates at bandwidth of 250MHz.complete in all respects as approved and desired by the Engineer in-charge at site.
610
50
30500
... More
Supply, Installation, Testing & Commissioning of 6 Mtr HDMI Cable for NVR, UL Listed complete in all respects as approved and desired by the Engineer in-charge at site.
1
1714
1714
... More
Supply, Installation, Testing & Commissioning of 1 KVA UPS with Input power factor - 0.99, Output power factor - 0.8, OVCD inbuilt , DC V 36v, Efficiency : Above 90% complete in all respects as approved and desired by the Engineer in-charge at site.
2
11585
23170
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
450
70
31860
... More
Supply, installation, testing & Commissioning of Microprocessor based 2-Loop True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event , 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure, Products not having this feature will offer Redundant CPU. Four access levels, flash EPROM, Panel should be capable to work 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall support with Integrated 8 channel Digital Voice Evacuation System Controller capable of broadcasting Evacuation Messages on same peer-to-peer Network and 2 ways Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. The panel shall be capable of self programing without any dependancy on dongle or programming software. Quoted rate shall include supply of necessary software & hardware for progamming the panel with all necessary licence. Panel shall have Modbus/ Bacnet over IP protocol for future integration with BMS. However, for present arrangement FA system will be standalone with 24x7 monitoring. The panel shall be capable for remote accessibility on a mobile app through cloud platform/solution. Designed to meet UL864, 10th The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab.complete in all respects as approved and desired by the Engineer in-charge at site.
1
320295
320295
... More
Supply, installation, testing & Commissioning of Inbuilt automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition with the charging capacity of 200AH with Emergency evacuation Control Panel & Digital Voice command system with Battery Dress Panel. The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab complete in all respects as approved and desired by the Engineer in-charge at site.
1
51709
51709
... More
Supply, installation, testing & Commissioning of Paging Microphone compatible with Emergency evacuation Control Panel Project specific OEM authorization required for executing agency complete in all respects as approved and desired by the Engineer in-charge at site.
1
26276
26276
... More
Supply, installation, testing & Commissioning of Addressable Smoke/Multi-criteria Photo-Thermal Detector and base with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Designed to meet UL268, 7th Edition complete in all respects as approved and desired by the Engineer in-charge at site.
154
4059
625086
... More
Supply, installation, testing & Commissioning of Reponse Indicator for up side of ceiling complete in all respects as approved and desired by the Engineer in-charge at site.
41
773
31693
... More
Supply, installation, testing & Commissioning of Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches.The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab complete in all respects as approved and desired by the Engineer in-charge at site.
1
3540
3540
... More
Supply, installation, testing & Commissioning of High Sensitivity early warning Photo Detector with sensitivity level of 0.02% to 2% Obs/Feet. The detector shall have the optic block to amplify signals from smoke, but diminish stray internal reflections that can cause false alarms. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Designed to meet UL268, 7th Edition complete in all respects as approved and desired by the Engineer in-charge at site.
1
25488
25488
... More
Supply, installation, testing & Commissioning of Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device complete in all respects as approved and desired by the Engineer in-charge at site.
8
4296
34368
... More
Supply, installation, testing & Commissioning of Addressable Fire Fighter's Telephone Jack for two way communication between Remote Fire Fighter & Fire Command Center. Each Telephone jack should have separate address. complete in all respects as approved and desired by the Engineer in-charge at site.
8
2752
22016
... More
Supply, installation, testing & Commissioning of Fire Fighter's Telephone Handset for two way communication between Remote Fire Fighter & Fire Command Center complete in all respects as approved and desired by the Engineer in-charge at site.
1
10621
10621
... More
Supply, installation, testing & Commissioning of Addressable Control Module for Sounders / Strobes / Sounder cum Strobes/ Telephone Jack. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance complete in all respects as approved and desired by the Engineer in-charge at site.
13
4433
57629
... More
Supply, installation, testing & Commissioning of Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab complete in all respects as approved and desired by the Engineer in-charge at site.
1
4433
4433
... More
Supply, installation, testing & Commissioning of Isolator Module for Isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab complete in all respects as approved and desired by the Engineer in-charge at site.
12
3702
44424
... More
Supply, installation, testing & Commissioning of Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab complete in all respects as approved and desired by the Engineer in-charge at site.
1
4611
4611
... More
Supply, installation, testing & Commissioning of Sounder cum Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashintg at 1 Hz for visual indication. UL Listed.The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab complete in all respects as approved and desired by the Engineer in-charge at site.
8
5255
42040
... More
Supply, installation, testing & Commissioning of Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashintg at 1 Hz for visual indication. UL Listed. Project specified OEM authorization required for executing agency. The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab complete in all respects as approved and desired by the Engineer in-charge at site.
5
4866
24330
... More
Supply,installation, testing & Commissioning of Digital Audio Amplifier with cabinet & Amp power supply. Amplifier shall be capable of N:N/N:1 configuration and shall be dual channel capable of processing Two of 8 audio channels and a total of 100 W at 70.7 VRMS output along with necessary enclosures with local FFT Raiser. The Digital Audio Amplifier shall be fully monitored for fault and alarm reporting. The proposed Digital Audio Amplifiers shall (be Wall/Panel Mounted) not be rail mounted / dependant on Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of Amplifier operation. The Amplifiers shall be distributed across the building/floor to manage the sound attenuation problem & for the best sound intelligibility. All amplifiers shall provide back up of minimum 5 hours using secondary power source(battery power/UPS power). .Executing agency should have project name specified OEM authorization on the time of supply and also have a minimum two OEM certified engineer for commissioning & programming complete in all respects as approved and desired by the Engineer in-charge at site.
2
168689
337378
... More
Supply,installation, testing & Commissioning of Integrated 8 channel Digital Voice Evacuation System Controller capable of broadcasting Evacuation Messages on the same peer-to-peer Network and 2 ways Communication capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. Products not having this feature must provide dedicated CPU for DVC. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. The panel shall be capable of self programming without any dependency on dongle or programming software. Quoted rate shall include supply of necessary software & hardware for programming the panel with all necessary licence. Panel shall have Modbus/ Bacnet over IP protocol for future integration with BMS. However, for the present arrangement the FA system will be standalone with 24x7 monitoring. The panel shall be capable of remote accessibility on a mobile app through cloud platform/solution. Designed to meet UL864, 10th Edition. .Executing agency should have project name specified OEM authorization on the time of supply and also have a minimum two OEM certified engineer for commissioning & programming complete in all respects as approved and desired by the Engineer in-charge at site.
1
264155
264155
... More
Supply, installation, testing & Commissioning of 2W Multi-Tap (0.25W; 0.5W; 1W; 2W), Ceiling/Wall Mount Speakers. The speakers shall be of the same make as that of the Control Panel & Amplifiers. They shall be compatible with supplied Amplifiers and shall work on 70.7Vrms. UL Listed. Project specific OEM authorization required for executing agency complete in all respects as approved and desired by the Engineer in-charge at site.
139
2636
366404
... More
Supply, installation, testing & Commissioning of Back box for speaker as per site requirement complete in all respects as approved and desired by the Engineer in-charge at site.
139
1157
160823
... More
Supply, installation, testing & Commissioning of fire resistance cable (Colour Red) (at 950° C for 180 minutes) of BS6387/BS7846 Fire Proof Cable, 2C X 1.5 sqmm, BS6387 & BS7846, annealed stranded copper conductor, mica fire resistant tape, XLPE insulated, low smoke & zero halogen (LSZH) bedding, galvanized steel wire armour, low smoke & zero halogen (LSZH) red outer sheath. 600/1000 volts. Fire resistant to IEC 331 & BS7846 F2/BS6387 & CWZ. Acid gas emission to BS EN 50267 (IEC60754), smoke emission to BS EN 50268 (IEC61034) and flame propagation to BS EN 50265, BS EN 50266 (IEC 60332-3) complete in all respects as approved and desired by the Engineer in-charge at site.
1200
220
264000
... More
Supply, installation, testing & Commissioning of Exit LED M ST LED LED based exit sign with dimming function, Reading distance, exit sign Two-sided 25m, Voltage 220-240VAC / 50-60Hz, Power consumption 3.3W / 3.5VA, Battery 3.6V/1.2Ah NiMH, Battery protection Over charge protection /deep discharge protection, Charging Time 16 hours, Battery back-up time 1 hour / 3 hours / 8 hours (from dip switch), Light source 15 LED, Approvals EN 60598-1, EN 60598-2-22, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3, Ambient temperature 5 to 40 °C, Humidity Up to 95%, IK rating IK09, IP rating IP40, Dimensions 265 x 53 x 222 mm, Weight 540 / 742 gr , Colour Anodized aluminum / black plastic, Materials Aluminum, Acrylic Plate, Mounting method Ceiling, wall bracket, suspended, pendulum, flag mount, Delivered as self-contained/auto test luminaire Choice of 1, 3 or 8 hour autonomy via DIP switch IP 40 – dustproof luminaire Reading distance upto 25 meters.High lumen output – 1h = 180lm / 3h = 110lm /8h = 40lm Technical lifetime of LED 100 000 hours , 4 Pictograms (left, right, down, up) are included in the luminaire ordering part code complete in all respects as approved and desired by the Engineer in-charge at site.
8
13040
104320
... More
Supply, installation, testing & Commissioning of Agora LED NM LED IP65 230V 2X6W 1h/3h/8h. The luminiare comes in plastic housing. Mounting bracket is not required for this luminaire, IP65/NA 0 Non -Maintained Self Testing 12V / 7Ah Pb, LED based for anti-panic area, surface assembly Delivered as self-contained/auto test luminaire Choice of 1, 3 or 8 hour autonomy via DIP switch High lumen output – 1h = 360lm / 3h = 170lm / 8h = 70lm Simple and quick assembly and maintenance Technical lifetime of LED 100 000 hours • IP65 – dust and waterproof luminaire, Voltage 220-240VAC / 50-60Hz Power consumption 11.4W / 11.8VA Battery 12V / 7Ah Pb Battery protection Over charge protection /deep discharge protection Charging Time 23 hours, Battery back-up time 1 hour / 3 hours / 8 hours (from dip switch), Light source LED 2x6, Technical lifetime (light source) 100 000 hours, Lumen output, emergency (1h / 3h / 8h) 3200 / 1600 / 800 lm, Approvals EN 60598-1, EN 60598-2-22, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3, Ambient temperature 5 to 40 °C, Humidity Up to 95%, IP rating IP65, Dimensions 302 x 94 x 210 mm, Weight 4200 / 4420 gr, Materials PC/ABS, PC, Aluminium, Mounting method Wall mounting, Make : Honeywell, Siemens / RP / Olampia / Adward.The solution should be from single OEM. OEM should have manufacturing facility in India. OEM Should have presence in India from last 15 year. OEM should have own toll free number for service & support of product. Contactor shall off load the work to specialized agency having direct distributorship from OEM & distributor will have minimum 2 trained OEM certified engineers & distributor have its own registered office in Punjab. complete in all respects as approved and desired by the Engineer in-charge at site.
7
43599
305193
... More
Supply, installation, testing & Commissioning of Online UPS 1 kva 800 Watts Tower UPS with 1 hour battery backup. Operating Temperature Range 0 to 40 Degree @ 100% Load @ 50 Degree with 50% Load,Storage Temperature -15°C~60°C, Relative Humidity 0-95% No condensates, Acoustic Noise 40 dBA @ 1 Meter, Cooling Forced air cooling by the internal fans, Input Socket IEC C13, Output Socket IEC C14, No of output sockets 3 No's, Rated Input Voltage 208/220/230/240 Vac, Maximum working input voltage range 160 to 300 Vac @ 100% Load, 100 to 300 Vac @ 50% Load, Input Power Factor 0.99, Input THDi% 5%, Generator Set Yes 1.5 x UPS Capacity, Rated kVA 1000 VA, Rated kW 800 Watts, Load type Resistive load/ lagging load/ non-linear load/ transformer load/ lighting load, Load power factor range 0.5~1 lagging, Load Crest Ratio 3:1, Online Efficiency 88%, Rated Battery Voltage 36 Vdc, Battery Type VRLA (Valve Regulated Lead Acid Battery), 12VDC, Battery backup Back UP : 936VAH, Maximum charging current 10 Amps, ECO Mode Available, Communication (Independent SCI) Available, Intelligent Card slot (Independent SCI) Available, OVCD Available, EPO Function Available, Intelligent Fans Speed control Available, Auto restart function Available, Cold start Available complete in all respects as approved and desired by the Engineer in-charge at site.
1
31003
31003
... More
PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-
Overall size 1.5sq.mm (48/0.20mm), 2Core
1200
47
57516
... More
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:- Heavy gauge welded conduit pipe 25mm dia. (ISI marked 1.60mm thick) Flushed
800
140
112728
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
800
70
56640
... More
Providing Nurse Call System :
Supply, erection, testing & commissioning of VDE 0834 certified/ approved System Switch:
The system switch forms a decentralised communications node for exchanging data between the connected system devices and the rest of the communications system, consisting of : - 1 x RJ45 socket, 100Mb IP Port (IEEE802.3 100BaseTX), galvanically isolated conforming to EN 60950 and VDE 0834; - 7 x RJ45 sockets, each for a 100Mb IP system port (IEEE802.3 100BaseTX) for connecting all IP capable system modules; - 1 x RJ45 socket, 100Mb IP Port (IEEE802.3 100BaseTX) for connecting communications, staff and ward terminals as well as control panel PCs or for redundant Connection.- Control LEDs for indicating the current operating state, - 2 x RJ45 sockets for connection of the external data bus; - All IP system modules are supplied with power using Power over LAN technology complete in all respects as approved and desired by the Engineer-in-charge at site.
4
73163
292652
... More
Supply, erection, testing & commissioning of VDE 0834 certified/ approved Nurse Station Terminal:
Nurse Station shall comprises of minimum 7“ large touch screen LC colour graphic display for displaying all details , a smash proof glass panel (to protect the sensitive display from unnecessary contact during cleaning and other processes) , Querying receiver for speaking discretely, Microphone and loudspeaker for hands-free speech (incl. volume control), automatic changeover between hands-free and discrete speaking , Electronic circuit board with controller and FlashProm, 100BaseTX interface to the system switch, PC interface to the communications control panel , 2.8m connection cable with an RJ45 connection plug, which is protected, from disconnection, for connecting to a connection module . The ward terminal shall display date and time, indication of all presence, all set reminedrs, indication of all calls in accordance with VDE0834. All call indications follow the priority and must display the exact location of the calls. The ward terminal shall be provided along with suitable connection module & back box. complete in all respects as approved and desired by the Engineer-in-charge at site.
1
170190
170190
... More
Supply, erection, testing & commissioning of 'Connection module for External monitor:
VDVI Module - DVI output with inbuilt sounder to display nurse call on external monitor Module shall contain:
• Connection of 2 DVI monitors • 2 DVI sockets for standard monitors with DVI input connection (computer TFT/LCD/ flat screen monitor) or a HD ready TV. On each device the same text is indicated. For TV devices without DVI input, a passive DVI / HDMI coupler can be used. HD video in format 720p60 • Galvanic isolated DVI outputs • built-in piezo buzzer for call signaling
• LAN interface: RJ45 socket, 100Base-TX interface complete in all respects as approved and desired by the Engineer-in-charge at site.
6
48938
293628
... More
Supply, erection, testing & commissioning of External Monitor- To display call generation on external bigger display:
Min. 21" LCD/ LED monitor of reputated make with mounting accessories having DVI input port (Incase DVI input not available in external monitor, DVI to HDMI convertor may be used for HDMI output). complete in all respects as approved and desired by the Engineer-in-charge at site.
6
22476
134856
... More
Supply, erection, testing & commissioning of VDE 0834 certified/ approved Patient Handset - Without Speech:
Non Speech Patient Hand set consisting of a plastic case in antimicrobial finish having
- Call button with nurse symbol with integrated finder and reassurance light on the top end of the unit,
- Membrane keypad in antimicrobial/ anti fungal finish with integrated LEDS for operation, consisting of:
- 2 call key,
- 2 lighting keys
- 2.80 metre connection cable with auto-disconnecting RJ45 connector plug.
It shall be supplied with cradel for holding patient terminals & necessary connection module. complete in all respects as approved and desired by the Engineer-in-charge at site.
37
9154
338698
... More
Supply, erection, testing & commissioning of VDE 0834 certified/ approved connection module for Patient Terminal:
Connection module for patient handset shall consist of:
- 1 x RJ45 socket marked in colour and with measures to ensure that the push button is correctly connected, including auto disconnect mechanism,
- 1 membrane keypad with:
- 1 call button (red with nurse symbol) including a finder/reassurance light,
- 1 presence key/ cancel button (green) including a control LED, - 1 DIN Socket for interfacing with other medical devices - should be connected in loop technology complete in all respects as approved and desired by the Engineer-in-charge at site.
37
21315
788655
... More
Supply, erection, testing & commissioning of VDE 0834 certified/ approved Patient Handset - With Speech: consisting of a plastic case in antimicrobial finish having
- Call button with nurse symbol with integrated finder and reassurance light on the top end of the unit,
- Membrane keypad in antimicrobial/ anti fungal finish with integrated LEDS for operation, consisting of: - Integrated loudspeaker and microphone for speech connections - Integrated LC display with position alignment
- 2.80 metre connection cable with auto-disconnecting RJ45 connector plug.
It shall be supplied with cradel for holding patient terminals & necessary connection module.
complete in all respects as approved and desired by the Engineer-in-charge at site.
2
39159
78318
... More
Supply, erection, testing & commissioning of VDE 0834 certified/ approved Room Terminal with display:
Terminal with acoustic and optical call forwarding, display,
call and presence buttons.
• Integrated LCD with backlight
• Germ inhibiting membrane keypad with the following
buttons:
– Presence button (green) with status LED
– Presence button (blue) with status LED
– Call button (red) with locating and reassurance
light
– Doctor call button (blau) with reassurance light
– Three function buttons complete in all respects as approved and desired by the Engineer-in-charge at site.
2
23143
46286
... More
Supply, erection, testing & commissioning of VDE 0834 certified/ approved call & cancel Button - For WC:
call cancel button for WC shall consist of:
- 1 call button including a finder light & reassurance light,
- 1 presence button (green) incl. control LED,
- integrated finder lights or reassurance light
- Moisture Protected
- should be connected in loop technology.
complete in all respects as approved and desired by the Engineer-in-charge at site.
10
7961
79610
... More
Supply, erection, testing & commissioning of VDE 0834 certified/ approved Code Blue button - Doctor call-Cancel button for wards:
1 doctor call key (blue) including a finder light / reassurance light, - Doctor cancel button
- a membrane keypad
- Integrated sounder
-2 RJ45 ports for loop connectivity
- should be connected in loop technology. complete in all respects as approved and desired by the Engineer-in-charge at site.
9
12728
114552
... More
Supply, erection, testing & commissioning of VDE 0834 certified/ approved Loop Powered Lamp Module:
For optical indication of calls, presences and reminders in the relevant colours conforming to VDE0834 consisting of:
- 5 light chambers with light reflectors for homogeneous illumination,
- 1 light chamber fitted with 3 ultra bright red LEDs,
- 1 light chamber fitted with 3 ultra bright white LEDs,
- 1 light chamber fitted with 3 ultra bright green LEDs,
- 1 light chamber fitted with 3 ultra bright blue LEDs,
- 1 light chamber fitted with 3 ultra bright Yellow LEDs,
- 2 RJ45 ports for loop connectivity
- the LED life expectancy is approximately 100,000 operating hours,
- should be connected in loop technology.complete in all respects as approved and desired by the Engineer-in-charge at site.
6
8125
48750
... More
Supply, erection, testing & commissioning of Management center - Nurse Call Server: Networking, Software & Integration
Management Centre Server for Nurse Call System for uploading the firmware and the system configuration, for operating interfaces to foreign systems, for logging of all system events and as a central location for system configuration and remote maintenance as per VDE 0834 - Intel Xeon 3220 2,4GHz or similar
- 2 GB RAM, 1 x 160GB HDD
- 1 x DVD harddrive, 2 x Gbit LAN Ethernet RJ45
- 1 x serial connection RS232 and 2 x USBV2.0
- 1 x PCI or 1 x PICe socket, support for SUSE Linux enterprise Server from V10.1 complete in all respects as approved and desired by the Engineer-in-charge at site.
1
427379
427379
... More
Supply, erection, testing & commissioning of Backbone Switch : Floor Switch: Uplink connections: 2 x 1Gb uplink ports, RJ45 (GBIC capable, possibility for LWL) Connections downlink: 16 x 100Mb downlink ports, RJ45 Switch must have all the function which is mentioned in the tender Document complete in all respects as approved and desired by the Engineer-in-charge at site.
1
115857
115857
... More
Supply, erection, testing & commissioning of Software- Event Database Software: Software pack installed on the system server for automatically logging all events in the entire communications system, such as, e.g., calls, presence markings,call acknowledgements, reminders complete in all respects as approved and desired by the Engineer-in-charge at site.
1
261773
261773
... More
Supply, erection, testing & commissioning of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 4 Pair CAT6 Unshielded, Twisted Pair (U/UTP) Cable 305 mtr per Box. Blue in colour conforming to the following standards like ANSI/TIA 568 C.2, EN50173, IEC 11801 2nd ED, 700Mhz etc. in Cat 6 U/UTP LCS2 cable with 23AWG.Complete in all respect to the entire satisfaction of the engineer-in-charge including 3 Year Warranty on site Service Support. complete in all respects as approved and desired by the Engineer-in-charge at site.
1000
50
50000
... More
Supply & Laying of Wall Mount 15U x 600 W x 600 D , Front Glass Door (tinted, Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails with U-Marking , Welded Side Walls, Min Accessories : 1U Cable Manager (1), Hardware Packet (1 Pkt), 6 Socket 5 Amp. Power Distribution Unit (1 No), Roof Mounted Fan Unit / 90 CFM /230V AC. as per DIN 41494 Standards including 3 Year Warranty.complete in all respects as approved and desired by the Engineer-in-charge at site.
1
11706
11706
... More
PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-
Overall size 1.5sq.mm (48/0.20mm), 2Core
300
47
14379
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
700
70
49560
... More
Providing UPS System 60KVA (1+1) with inbuilt isolation transformer (30 Min. Back-up at 100% Load):
Supply, Erection, Testing & commissioning of 60 KVA IGBT based Online UPS 60000 VA / 48000 watt 3 phase input 3 phase out put with inbuilt isolation transformer, for approx 30 min backup at 100% Load (Special Features:-Advanced Microprocessor Control, LCD Display on front Panel, 0.9 Power Factor (60000 VA / 48000 watt), Can be mounted in a Server Rack, Can be Mounted in Parrallel Mode, Heavy Duty Charger upto 13amp, Dual Input Supply available, Extra Wide Input Voltage Range, Input Power Factor Correction, Sine-Wave Output, EMI/RFI Filters & Surge Protectio, Self Diagnostic & Battery Tests, Intelligent Battery Management, User-friendly Panel with Load & Battery Bar-Graphs, Power Chute Software for UPS Power Management & Diagnostics compatible to, Windows, Novell & Unix (Automatic PC Shut down Software), 34 nos.120ah Battery, Rack for Battery, Battery interconnecting cables, cables between UPS and Battery and Battery circuit breaker as approved & desired by the Engineer in charge at site. complete in all respects as approved and desired by the Engineer-in-charge at site.
2
1340402
2680804
... More
Roality for odinary soil
4250.16
103
439381.54
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%