Public Works Department Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 92,60,563Document Cost
₹ 50,000Tender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_CEPW_75814_1Bid Award Id
ViewTender No
Bid No. 47 Dt. 19.10.2021Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taken only from outside the premises laying in plinth in 15 cm layers including ramming, watering and consolidating including all leads.
8055.43
-
369.44
... More
Providing and applying Anti Termite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturer's specifications (i) In foundation pits, by treating the bottom & sides upto height of 300mm by uniformly spraying solution @ 5 Litre / Sqm (ii) In the refill earth on both sides of all built up walls @ 7.5 Litre / Running meter ( width - 300 mm, depth - 450 mm ) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidated earth within the outer perimeter @ 5 Litre solution per Sqm.
4496.67
-
372
... More
Cement concrete 1:5:10 with 40 mm gauge stone ballast. using concrete mixing volumetric type
919.04
-
4094.65
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and without vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth (For Pile Work)
4475.63
-
6019.72
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
6915.88
-
210
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
854.87
-
5443.85
... More
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.
-
-
-
... More
Lintels
259.31
-
6769.72
... More
Extra rate for First Floor
61.57
-
181
... More
Extra rate for Second Floor
48.67
-
362
... More
Extra rate for Third Floor
48.45
-
543
... More
Extra rate for Fourth Floor
47.93
-
724
... More
Extra rate for Fifth Floor
5.93
-
905
... More
Shelves
-
-
-
... More
Total all Floor
17.65
-
6769.72
... More
Extra rate for First Floor
3.2
-
181
... More
Extra rate for Second Floor
3.19
-
362
... More
Extra rate for Third Floor
2.53
-
543
... More
Extra rate for Fourth Floor
1.94
-
724
... More
Extra rate for Fifth Floor
0.86
-
724
... More
Beams
-
-
-
... More
Total all floor
1943.84
-
6769.72
... More
Extra rate for First Floor
429.33
-
181
... More
Extra rate for Second Floor
329.67
-
362
... More
Extra rate for Third Floor
336.71
-
543
... More
Extra rate for Fourth Floor
325.1
-
724
... More
Extra rate for Fifth Floor
59.7
-
905
... More
Columns (Rectangular & Square)
-
-
-
... More
Total all Floor
1368.02
-
6769.72
... More
Extra rate for First Floor
295.38
-
181
... More
Extra rate for Second Floor
247.51
-
362
... More
Extra rate for Third Floor
247.51
-
543
... More
Extra rate for Fourth Floor
223.61
-
724
... More
Extra rate for Fifth Floor
49.66
-
905
... More
Columns (Circular)
-
-
-
... More
Total all Floor
34.12
-
6769.72
... More
Extra rate for First Floor
8.81
-
181
... More
Extra rate for Second Floor
1.42
-
362
... More
Extra rate for Third Floor
1.42
-
543
... More
Extra rate for Fourth Floor
1.42
-
724
... More
Extra rate for Fifth Floor
1.42
-
905
... More
Slab
-
-
-
... More
Total qty for all floor
3549.66
-
6769.72
... More
Extra rate for First Floor
772.33
-
181
... More
Extra rate for Second Floor
620.76
-
362
... More
Extra rate for Third Floor
520.16
-
543
... More
Extra rate for Fourth Floor
627.77
-
724
... More
Extra rate for Fifth Floor
129.07
-
905
... More
Walls
-
-
-
... More
Total all Floor
318.96
-
6769.72
... More
Extra rate for First Floor
42.45
-
181
... More
Extra rate for Second Floor
42.45
-
362
... More
Extra rate for Third Floor
42.45
-
543
... More
Extra rate for Fourth Floor
42.45
-
724
... More
Extra rate for Fifth Floor
40.69
-
905
... More
Facia
50.45
-
6769.72
... More
Extra rate for Fifth Floor
50.45
-
905
... More
Extra cost for providing corbelling in 5 layers at height of 12mtr complete in all respect as per architect drawing, specification and as desired by Engineer in charge. (RCC work will be paid in original item)
116.96
-
3730.99
... More
Extra for using computerised concrete batch mixing plant including carriage by transit mixer within 1 km lead (note: where concrete mixer is already included in the rate the same shall be deducted )
4796.16
-
124
... More
Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)
4796.16
-
88
... More
Extra rate for enhancement in pumping power, addition of pipe length, scaffolding for handling the pipe arrangement for pumping of concrete in subsequent storey above the below storey up to height of 4 meters or part there of up to the roof top level of that storey
-
-
-
... More
Extra Rate for First Floor
1089.52
-
22
... More
Extra Rate for Second Floor
790.52
-
44
... More
Extra Rate for Third Floor
790.56
-
66
... More
Extra Rate for Fourth Floor
853.46
-
88
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
-
-
-
... More
Total qty for all floor
28312.66
-
532
... More
Extra rate for First Floor
6274.67
-
10
... More
Extra rate for Second Floor
5024.04
-
20
... More
Extra rate for Third Floor
4181.89
-
30
... More
Extra rate for Fourth Floor
4566.8
-
40
... More
Extra rate for Fifth Floor
1080.75
-
50
... More
Centring and shuttering for Columns ( Square or Rectangular or ply gonal in plain)
-
-
-
... More
Total qty for all floor
12540.16
-
477
... More
Extra rate for First Floor
2363.04
-
10
... More
Extra rate for Second Floor
1980.08
-
20
... More
Extra rate for Third Floor
1980.08
-
30
... More
Extra rate for Fourth Floor
1788.88
-
40
... More
Extra rate for Fifth Floor
397.28
-
50
... More
Centering and shuttering for columns (circular or curved in plain)
-
-
-
... More
Total qty for all floor
344.48
-
482
... More
Extra rate for First Floor
70.48
-
10
... More
Extra rate for Second Floor
11.36
-
20
... More
Extra rate for Third Floor
11.36
-
30
... More
Extra rate for Fourth Floor
11.36
-
40
... More
Extra rate for Fifth Floor
11.36
-
50
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
-
-
-
... More
Ground Floor
-
-
-
... More
Total qty for all floor
17625.2
-
380
... More
Extra rate for First Floor
3927.2
-
10
... More
Extra rate for Second Floor
3026.72
-
20
... More
Extra rate for Third Floor
3081.28
-
30
... More
Extra rate for Fourth Floor
2984.24
-
40
... More
Extra rate for Fifth Floor
525.04
-
50
... More
Centring and shuttering for stair cases with sloping with
soffits including risers and stringers.
-
-
-
... More
Total qty for all floor
1311.82
-
446
... More
Extra rate for First Floor
156.27
-
10
... More
Extra rate for Second Floor
156.27
-
20
... More
Extra rate for Third Floor
156.27
-
30
... More
Extra rate for Fourth Floor
648.21
-
40
... More
Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or bartering including attached pillasters buttersses etc
-
-
-
... More
Total qty for all floor
3733.47
-
405
... More
Extra rate for First Floor
551.85
-
10
... More
Extra rate for Second Floor
551.85
-
20
... More
Extra rate for Third Floor
551.85
-
30
... More
Extra rate for Fourth Floor
551.85
-
40
... More
Extra rate for Fifth Floor
528.97
-
50
... More
Centring and shuttering for carbels, parapet, fascias and other similar items including edges.
-
-
-
... More
Fifth Floor
1009
-
520
... More
Extra rate for Fifth Floor
1009
-
50
... More
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level..
-
-
-
... More
Total qty for all floor
3826.84
-
5580.85
... More
Extra rate for First Floor
792.52
-
146
... More
Extra rate for Second Floor
697.24
-
292
... More
Extra rate for Third Floor
604.81
-
438
... More
Extra rate for Fourth Floor
599.87
-
584
... More
Extra rate for Fifth Floor
264.97
-
730
... More
Providing and laying autoclaved aerated cement blocks masonry with 100mm thick AAC blocks in super structure above plinth level in cement mortar 1:4 (1 cement : 4 fine sand ) The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work.
-
-
-
... More
Total qty for all floor
380.31
-
5637
... More
Extra rate for First Floor
83.13
-
146
... More
Extra rate for Second Floor
92
-
292
... More
Extra rate for Third Floor
86.41
-
438
... More
Extra rate for Fourth Floor
40.76
-
584
... More
First class burnt brick work laid in cement sand mortor 1:4 in first storey upto 4 metres above plinth level.
-
-
-
... More
Total qty for all floor
496.44
-
5755.85
... More
Extra rate for First Floor
106.74
-
146
... More
Extra rate for Second Floor
90.98
-
292
... More
Extra rate for Third Floor
90.98
-
438
... More
Extra rate for Fourth Floor
90.98
-
584
... More
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure.
-
-
-
... More
Total Qty for all floor
5985.06
-
753.34
... More
Extra rate for First Floor
1184.8
-
15
... More
Extra rate for Second Floor
1207.89
-
30
... More
Extra rate for Third Floor
1245.45
-
45
... More
Extra rate for Fourth Floor
1156.93
-
60
... More
Extra rate for Fifth Floor
58.77
-
75
... More
75 mm thick brick wall laid in cement sand mortar 1:4 with every alternate course reinforced with hoop iron in superstructure.
-
-
-
... More
Total Qty for all floor
250.8
-
611.34
... More
Extra rate for First Floor
50.16
-
15
... More
Extra rate for Second Floor
50.16
-
30
... More
Extra rate for Third Floor
50.16
-
45
... More
Extra rate for Fourth Floor
50.16
-
60
... More
Brick jali with 22.86cm x 11.43cm thick alternate layers laid in cement sand mortar 1:4 using 58 number bricks.
20.84
-
980.89
... More
12.5mm thick cement plaster 1:5.
18584.39
-
187.35
... More
Extra rate for First Floor
3835.63
-
2
... More
Extra rate for Second Floor
3389.76
-
4
... More
Extra rate for Third Floor
3381.23
-
6
... More
Extra rate for Fourth Floor
3091.31
-
8
... More
Extra rate for Fifth Floor
459.36
-
10
... More
20 mm thick cement plaster 1:5 in two coats work.
18584.39
-
256.52
... More
Extra rate for First Floor
3835.63
-
2
... More
Extra rate for Second Floor
3389.76
-
4
... More
Extra rate for Third Floor
3381.23
-
6
... More
Extra rate for Fourth Floor
3091.31
-
8
... More
Extra rate for Fifth Floor
459.36
-
10
... More
12.5 mm thick cement plaster 1:4.
14191.43
-
195.35
... More
Extra rate for First Floor
3131.23
-
2
... More
Extra rate for Second Floor
2803.55
-
4
... More
Extra rate for Third Floor
1817.63
-
6
... More
Extra rate for Fourth Floor
1817.87
-
8
... More
Extra rate for Fifth Floor
1250.54
-
10
... More
Extra rate for Sixth Floor
123.55
-
12
... More
20 mm thick cement plaster 1:4.
14191.43
-
269.52
... More
Extra rate for First Floor
3131.23
-
2
... More
Extra rate for Second Floor
2803.55
-
4
... More
Extra rate for Third Floor
1817.63
-
6
... More
Extra rate for Fourth Floor
1817.87
-
8
... More
Extra rate for Fifth Floor
1250.54
-
10
... More
Extra rate for Sixth Floor
123.55
-
12
... More
Extra rate for Smooth Surface of Ceiling.
14880.72
-
53.2
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS Clamp
U-PVC pipes (working pressure 4kgf. / sqcm)
pipe 110 mm dia.
3605
-
252
... More
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
UPVC 110 mm bend
195
-
135
... More
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
195
-
84
... More
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
195
-
104.41
... More
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
195
-
700.8
... More
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
195
-
83.41
... More
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
3786.08
-
749.29
... More
Extra rate for First Floor
802.24
-
3
... More
Extra rate for Second Floor
1295.99
-
6
... More
Extra rate for Third Floor
803.46
-
9
... More
Extra rate for Fourth Floor
3202.57
-
12
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
1105.88
-
68.32
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
5376.54
-
510.91
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
15316.49
-
207.13
... More
Extra rate for First Floor
4494.7
-
3
... More
Extra rate for Second Floor
3366.6
-
6
... More
Extra rate for Third Floor
3511.63
-
9
... More
Extra rate for Fourth Floor
3145.1
-
12
... More
Extra rate for Fifth Floor
326.36
-
15
... More
Extra rate for Seventh Floor
472.1
-
21
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
370.39
-
3284.35
... More
Extra rate for First Floor
69.89
-
3
... More
Extra rate for Second Floor
69.78
-
6
... More
Extra rate for Third Floor
60.08
-
9
... More
Extra rate for Fourth Floor
51.49
-
12
... More
Extra rate for Fifth Floor
61.57
-
15
... More
Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
4075.82
-
1103.35
... More
Extra rate for First Floor
536.41
-
3
... More
Extra rate for Second Floor
535.74
-
6
... More
Extra rate for Third Floor
801.22
-
9
... More
Extra rate for Fourth Floor
652.6
-
12
... More
Extra rate for Fifth Floor
424.9
-
15
... More
Precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base for floors, treads of steps and landings
25.38
-
797.52
... More
Kotah stone tile 20mm thick in skirting, riser of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 Cement and 3 Sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing
232.65
-
1341.35
... More
Extra rate for First Floor
35.36
-
3
... More
Extra rate for Second Floor
35.41
-
6
... More
Extra rate for Third Floor
39.13
-
9
... More
Extra rate for Fourth Floor
40.78
-
12
... More
Extra rate for Fifth Floor
12.96
-
15
... More
Marble stone flooring with 12-15 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
Udaipur Green Marble Tiles of thickness 12mm to 15mm
Slabs sizes above 0.50 sqm
12422.25
-
1158.35
... More
Extra rate for First Floor
3793.37
-
3
... More
Extra rate for Second Floor
3179.48
-
6
... More
Extra rate for Third Floor
1594.53
-
9
... More
Extra rate for Fourth Floor
1331.34
-
12
... More
Extra rate for Fifth Floor
134.37
-
15
... More
Marble work of thickness 12-15 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).
Udaipur Green Marble Tiles of thickness 12mm to 15mm
Slabs sizes above 0.50 Sqm
1096.5
-
1487.35
... More
Extra rate for First Floor
192.04
-
3
... More
Extra rate for Second Floor
179.04
-
6
... More
Extra rate for Third Floor
179.04
-
9
... More
Extra rate for Fourth Floor
179.04
-
12
... More
Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.)
1850.66
-
178
... More
Extra labour for projected nosing of stair case of any shape and design
591.89
-
64
... More
Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness andcolouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects.respects.
10553.2
-
124
... More
Providing and Laying Out Door Precast Designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3(1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
63.54
-
1034.52
... More
Conglomerate floor 50mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
251.76
-
378.1
... More
Extra rate for First Floor
62.94
-
3
... More
Extra rate for Second Floor
62.94
-
6
... More
Extra rate for Third Floor
62.94
-
9
... More
Extra rate for Fourth Floor
62.94
-
12
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
Size 600x600 mm
5556.51
-
1430.52
... More
Extra rate for First Floor
2015.26
-
3
... More
Extra rate for Second Floor
1103.98
-
6
... More
Extra rate for Third Floor
1045.66
-
9
... More
Extra rate for Fourth Floor
1089.16
-
12
... More
Extra rate for Fifth Floor
204.38
-
15
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm.
5556.51
-
124
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with
pigment of matching shade complete.
-
-
-
... More
Total Qty for all floor
320.38
-
705.35
... More
Extra rate for First Floor
103.29
-
3
... More
Extra rate for Second Floor
105.8
-
6
... More
Extra rate for Third Floor
51.04
-
9
... More
Extra rate for Fifth Floor
60.25
-
15
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
-
-
-
... More
With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595x595 mm
1459.49
-
1364
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece..) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6
mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
263.38
-
1234
... More
Providing and fixing stair case railing made out of M.S. square bars 20mm x 20mm as vertical part 0.70 m high fixed with M.S. base plate of 40mm x 40mm x 6mm and flat iron 40mm x 6mm as hand rail complete in all respect.
91.44
-
908
... More
Providing & fixing 16 guage stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainles steel pipe, Balusters of 40mm dia stainless steel pipe complete in all respects.
2600.9
-
481
... More
Providing & laying multilayer Polyurethane flooring (10+2mm) consisting of primer on asphault surface, elastic layer SBR matt (5-12mm), Pore sealer (0.1mm), Cast coating (2-3mm), Antiskid multitop (0.5mm) including marking of ground approved by ITF on already laid flooring system complete in all respect & as per specifications laid in Handbook on field of Play published by SAI
202.18
-
5793.32
... More
Supply & Fixing of door frames (Chowkhats) consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (base steel as per IS:513) with zinc of 120gm/sqm & Powder coated with pure Polyster powder upto 50 micrones (as per approved colour) , 3 Nos 100mm but hinges 2mm thick, 6 Nos 1.2mm thick CRCA electroplated stiffner, 6 Nos M.S hold fast with split and tail welded to stiffner plate 200mm long, Receiver for aldrop, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.60mm of approved shade, fixed in position, including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in-Charge.
-
-
-
... More
Doors frame of size 80mm x 50mm with 37 mm wide single rebate for 35mm door shutter .
4827.04
-
1132
... More
Supply & Fixing of Window frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS : 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position by means of PVC & metal hold fastner with PVC cap complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in-Charge.
-
-
-
... More
Windows Outer frame of size 72mm x55mm and central mullion 72 mm x 50mm with Double rebate.
7738.06
-
1042
... More
Supply & Fixing of Window shutter consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS : 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position fixed in position by means of screws , complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in-Charge.
-
-
-
... More
Glazed Windows shutter Section 47mm x 20mm (Without Glass)
1899.99
-
5316
... More
Wire Mesh Windows shutter Section 40mm x 20mm with S.S wire mesh 32 guage flymesh with 144 holes per square inch
949.99
-
5403
... More
Providing and fixing glazing in door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of Gasket /beading shall be paid as per respective item)
-
-
-
... More
Float glass panes of 5.5 mm thickness
2216.54
-
775
... More
Providing & fixing fixed beeding 12mm x 12mm for fixed glass with ECO fixed gasket (EPDM)
12466.85
-
240
... More
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
321.52
-
10250.55
... More
Providing Polyester Powder coating 60 to 70 micron any coloured specified to M.S Grill section of various sizes including carriage of material from market to workshop & workshop to site of work.
32152
-
26
... More
Providing and fixing stair case railing made out of M.S. square bars 20mm x 20mm as vertical part 0.70 m high fixed with M.S. base plate of 40mm x 40mm x 6mm and flat iron 40mm x 6mm as hand rail complete in all respect.
1103.24
-
908
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) :
-
-
-
... More
For fixed portion & Chaukhat
4973.54
-
352
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
7339.88
-
368
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on one side.
35.12
-
956
... More
Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge.
6mm thick ACP Sheet
439.24
-
3115
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
295.21
-
1035
... More
Providing Polyster Powder coating 50 micron any coloured specrified to aluminium section of various sizes including carrriage of material from marktet to workshop ..
12313.42
-
68
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge.
92
-
1862
... More
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider.& bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non star bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.
547.32
-
7118
... More
Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 10mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for stiles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the stiles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
22.76
-
3617
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete
I.S.I Designation No. 1 (size of door up to 700mm)
563
-
987
... More
Providing and fixing Box Type cup Board 2'-0" deep (Kitchen Cabinet above shelves) made of 18mm thick HDHMR board finished with 1mm thick sunmica on outer side inside & all around, handle lock, magnet catcher, tower bolt & Curtain rod complete as per drawing as desired by Engineer-in-charge.
7.32
-
22464
... More
Providing and fixing Box Type cup Board 2'-0" deep (Kitchen Cabinet under shelves) made of 18mm thick HDHMR board finished with 1mm thick sunmica on outer side inside & all around, Including telescopic slide & Multiutility Basket complete as per drawing as desired by Engineer-in-charge.
8.12
-
28535
... More
Providing and fixing Box Type cup Board 2'-0" deep (Cabinet type-4) made of 18mm thick HDHMR board finished with 1mm thick sunmica on outer side inside & all around, handle lock, magnet catcher, tower bolt & Curtain rod complete as per drawing as desired by Engineer-in-charge.
18.98
-
14521
... More
Providing and Fixing of 18 gauge M.S. sheet cup board shutter Godrej type including Handles and locking arrangements duly fixed at site by means of gatti, nails/screw, metalic spray painting complete in all respect.
1062.12
-
4230
... More
Providing and fixing 12mm thick 150mm wide pelmets with 25mm dia aluminum rod and brackets including fixing with 25mmx3mm MS Flat 10cm long and PVC Plug etc complete
Deodar wood
782.68
-
898
... More
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973,
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-
-
-
-
... More
35mm thick
1501.92
-
2307
... More
Providing & Fixing decorative high pressure laminated sheet 1mm (2 Star) thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
3003.84
-
1279
... More
Providing and fixing commercial plywood 25mm thick
565.52
-
1764
... More
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
For shutter area above 0.50 sqm
2178.09
-
111
... More
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
300mm x 16mm
871
-
199
... More
Providing and Fixing writing Boards made of Ply Board size 6'x4' with sunmica finishing partly white partly green, Aluminium frame, Back side PVC water proof sheet duly fixed at site complete as per drawing & entire satisfaction of Engineer-in-Charge.
15
-
10000
... More
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
13640.18
-
7476.9
... More
Extra rate for First Floor
1927.57
-
13
... More
Extra rate for Second Floor
1511.38
-
26
... More
Extra rate for Third Floor
1420.73
-
39
... More
Extra rate for Fourth Floor
1461.61
-
52
... More
Extra rate for Fifth Floor
394.58
-
65
... More
Extra rate for using steel produced by primary producer such as SAIL/RINL/TATA/JINDAL complete in all respect as per the directions of Engineer-in-charge.
13640.18
-
373.3
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending.) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
901.8
-
1234
... More
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.
5597.66
-
282
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
61888.13
-
80
... More
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
16866.74
-
21
... More
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
16866.74
-
89
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on old distempered surface
37038.32
-
33
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
5464.88
-
75
... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
1092.43
-
24
... More
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
1272.42
-
43
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping et
1272.42
-
28
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
2364.85
-
66
... More
Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
9887.78
-
155
... More
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
14831.67
-
138
... More
Providing and Fixing of Copper Sheet 16 Gauge 350mm wide on expansion joint including covering with C. Concrete complete in all respect as per specifications.
408.8
-
4370
... More
Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allow movement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
697.96
-
541
... More
Construction of Plinth protection complete as per drawing.
-
-
-
... More
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
3312.22
-
182
... More
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
44.26
-
3809.46
... More
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.
117.18
-
5522.85
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
348.72
-
510.91
... More
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
523.09
-
329.83
... More
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
348.72
-
187.35
... More
PUBLIC HEALTH SERVICES
-
-
-
... More
Sub Head-1 Internal Sewerage System
-
-
-
... More
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
Single Socket Type A
-
-
-
... More
110mm o/d single socket SWR UPVC pipe lines laid complete
933.86
-
297.79
... More
90mm o/d single socket SWR UPVC pipe lines laid complete
1462.66
-
255.18
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
... More
qty as per Table Atached
-
-
-
... More
For 110mm o/d pipes
-
-
-
... More
Elbow 90 Degree (All side socketed)
85
-
154.31
... More
Vent Cowls
32
-
43.09
... More
Coupler
301
-
105.45
... More
Single Tee With Door
109
-
224.32
... More
For 90mm o/d pipes
-
-
-
... More
Elbow 90 degree (all side socket)
24
-
114.71
... More
Vent Cowls
35
-
35.72
... More
Coupler
314
-
103.78
... More
Single Tee With Door
102
-
175.41
... More
Floor Trap 110mm x 75mm
210
-
294.25
... More
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
... More
M.S. Holder bats clamps for 100mm i/d
256
-
206.15
... More
M.S. Holder bats clamps for 75mm i/d
280
-
192.54
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
... More
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
33
-
1832
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
... More
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
35
-
6436
... More
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects.
-
-
-
... More
uPVC Pipe 6 Kgf/cm2
50mm i/d
27.73
-
172.25
... More
Sub Head-2 Internal Water Supply System
-
-
-
... More
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
... More
CPVC SDR 11 Pipe & fitting 16mm o/d
1161.23
-
178.72
... More
SDR 11 CPVC pipes & fittings 20mm o/d
460.23
-
221.35
... More
CPVC SDR 11 Pipe & fitting 25mm o/d
499.85
-
285.75
... More
CPVC SDR 11 Pipe & fitting 32mm o/d
665.95
-
382.37
... More
CPVC SDR 11 Pipe & fitting 40mm o/d
284.97
-
505.27
... More
CPVC SDR 11 Pipe & fitting 50mm o/d
210.3
-
750.79
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
-
-
-
... More
qty same as GI P 15mm i/d to 25 mm
2121.31
-
69
... More
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
... More
Through wall 11.43 cm thick
302
-
167.46
... More
Through wall 22.86 cm thick
179
-
238.93
... More
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
-
-
-
... More
15mm i/d G.I. Union
230
-
91
... More
20mm i/d G.I. Union
138
-
150.83
... More
25mm i/d G.I. Union
130
-
190.38
... More
32mm i/d G.I. Union
266
-
245.44
... More
40mm i/d G.I. Union
98
-
325.66
... More
50mm i/d G.I. Union
82
-
415.45
... More
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
... More
20mm i/d Brass Ball valves
13
-
338.63
... More
25mm i/d Brass Ball valves
11
-
526.83
... More
32mm i/d Brass Ball valves
54
-
848.51
... More
40mm i/d Brass Ball valves
35
-
1045.86
... More
50mm i/d Brass Ball valves
30
-
1705.03
... More
Sub Head - 3 Sanitary Installation
-
-
-
... More
Providing and fixing in position Chinaware Indian Orisa water closet size 580 x 440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.
14
-
5323
... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
130
-
4780
... More
Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
Chinaware wall mounted E.W.C without
cistern including seat cover complete in
all respect.
10
-
9868
... More
Providing and fixing in position Metropole flush valve push type 32mm size dual flow (Concealed body) with exposed shut off provision and round plate complete in all respect.
10
-
3250
... More
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut
140
-
362
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
140
-
83
... More
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube
connection 300 mm long complete.
29
-
6551
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
... More
Size 49 cm dia (above counter round)
89
-
4710
... More
Size 550 mm x 400 mm x 815mm
64
-
3614
... More
Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.
-
-
-
... More
Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm
10
-
7740
... More
Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineer-in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect.
-
-
-
... More
Size 470mmx370mmx180mm
14
-
6426
... More
Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
Laboratory cock swan neck One Way
14
-
1350
... More
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube
connection 300 mm long complete.
40
-
6551
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
... More
Size 49 cm dia (above counter round)
58
-
4710
... More
Size 550 mm x 400 mm x 815mm
58
-
3614
... More
Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-in-charge) complete in all respect.
6
-
1122
... More
Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
122
-
2010
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 375 mm with PTMT nut
573
-
116
... More
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
132
-
113
... More
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
... More
C.P. brass towel Rails size 15mm dia 610mm long
122
-
1539
... More
C.P brass towel ring
90
-
911
... More
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
222
-
843
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
... More
C.P. brass Bib cock long nose/ long body without flange
338
-
1153
... More
C.P Brass bib cock foam flow without flange
184
-
917
... More
Providing & Fixing in postion CP Brass Spout Operated Pillar Tap with base flange (for foot operated valve) of approved make (to the approval of Engineer-in-charge) complete in all respect (instead of Pillar tap in Lavatory Suites).
175
-
678
... More
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
C.P.brass 15mm Angle valve without flange
573
-
826
... More
C.P.brass 15mm Concealed stop cock with flange
130
-
1204
... More
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
1225
-
63
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.
C.P. Brass extension piece, 25mm long to 50mm long
1225
-
107
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
166
-
1199
... More
Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.
111
-
1025
... More
Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect.
CP brass Acrylic Shelf size 560mmx130mm
111
-
1669
... More
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.
-
-
-
... More
Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.
-
-
-
... More
C.P. brass Bib cock with wall flange
6
-
1608
... More
C.P.brass 15mm Concealed stop cock with adjustable wall flange.
32
-
1533
... More
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
C.P. Brass Accessories:
-
-
-
... More
C.P. brass soap dish
6
-
654
... More
C.P. brass toilet roll holder with flap
139
-
1115
... More
C.P. Brass Accessories:C.P. brass towel bracket (610mm long)
6
-
2802
... More
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
266
-
367
... More
Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval of Engineer-in-charge) of size 600 mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect.
148
-
484.9
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Double Layer Tanks
54000
-
8.72
... More
Providing and fixing in position automatic brass Ball Cock in tanks.
Brass Ball Cock with rod and Plastic Ball
-
-
-
... More
Brass Ball Cock with rod and Plastic Ball 32mm i/d
24
-
1518.73
... More
Brass Ball Cock with rod and Plastic Ball 25mm i/d
10
-
902.69
... More
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
... More
G.I. tank nipple 25mm i/d
34
-
188.72
... More
G.I. tank nipple 40mm i/d
34
-
357.95
... More
Construction of RCC Plateform on Roof for HDPE water storage tanks complete as per drawing & specifications & as desired by Engineer-in-Charge
-
-
-
... More
For 2000 ltr Water Tank
24
-
14217
... More
For 1000 ltr Water Tank
2
-
10468
... More
For 500 ltr Water Tank
8
-
8795
... More
Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.
-
-
-
... More
35mm dia 900mm (36”) long
3
-
1740
... More
35mm dia 1200mm (48”) long
3
-
2667
... More
Foldable U Type 762mm long
3
-
6315
... More
Sub Head-4 Flooring and Wall Tile
-
-
-
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
-
-
-
... More
Ground Floor
590.04
-
510.91
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
-
-
-
... More
Total All Floor
1018.16
-
207.13
... More
Extra rate for First Floor
282.38
-
3
... More
Extra rate for Second Floor
245.26
-
6
... More
Extra rate for Third Floor
245.26
-
9
... More
Extra rate for Fourth Floor
245.26
-
12
... More
Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete .
-
-
-
... More
Total All Floor
1608.2
-
853.52
... More
Extra rate for First Floor
282.38
-
3
... More
Extra rate for Second Floor
245.26
-
6
... More
Extra rate for Third Floor
245.26
-
9
... More
Extra rate for Fourth Floor
245.26
-
12
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
1018.16
-
318.71
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
-
-
-
... More
Total All Floor
4264.66
-
859.35
... More
Extra Rate for First Floor
822.13
-
3
... More
Extra rate for Second Floor
799.37
-
6
... More
Extra rate for Third Floor
799.37
-
9
... More
Extra rate for Fourth Floor
812.92
-
12
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
-
-
-
... More
Total All Floor
194.89
-
3284.35
... More
Extra Rate for First Floor
28.55
-
3
... More
Extra rate for Second Floor
28.55
-
6
... More
Extra rate for Third Floor
28.55
-
9
... More
Extra rate for Fourth Floor
28.55
-
9
... More
Extra labour for projected nosing of stair case of any shape and design
108.7
-
64
... More
Sub Head -5 Water Coller
-
-
-
... More
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
... More
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer
17
-
35682
... More
Water Cooler Full Steel Body 40/80 ltr Capacity without Stablizer
20
-
31289
... More
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2 KVA
37
-
4754.1
... More
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all
respect.
37
-
12691
... More
ELECTRICAL SERVICES
-
-
-
... More
Providing Internal Electrical Installations:
-
-
-
... More
POINT WIRING:
-
-
-
... More
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring fan point with sheet metal fan box
1126
-
1148.75
... More
Wiring light point
2815
-
723.75
... More
Wiring call-bell point
17
-
706.25
... More
Wiring 3 pin 6 Amp. wall socket point
950
-
587.5
... More
Wiring 3 Pin 6 Amp. Plug control comprising wall socket point
668
-
352.5
... More
Wiring 3 pin 16/20 amp. power plug control point
543
-
453.75
... More
Wiring light point with double control switches.
49
-
1258.75
... More
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):-
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).
83
-
672
... More
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring Telephone socket point RJ11 (one module)
51
-
337.2
... More
Wiring Networking socket point RJ45 (one module)
138
-
438
... More
SUPPLY AND ERECTION OF WIRING ACCESSORIES:
Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-
-
-
-
... More
Ceiling Rose (Flush Piano type)
64
-
34.5
... More
Bakelite Batten Holder (Large size)
420
-
39.1
... More
Call Bell 220/230 volts AC Ding Dong
2
-
125.35
... More
COPPER WIRES & CONDUIT PIPE:
-
-
-
... More
PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
Overall size 1sq.mm (Un-sheathed)
10460
-
18.2
... More
Overall size 2.5sq.mm (Un-sheathed)
7200
-
35.1
... More
Overall size 4sq.mm (Un-sheathed)
14400
-
50.7
... More
Overall size 6sq.mm (Un-sheathed)
1640
-
70.2
... More
Overall size 10sq.mm (Un-sheathed)
7310
-
114.4
... More
Overall size 16sq.mm (Un-sheathed)
4610
-
178.1
... More
Overall size 25sq.mm (Un-sheathed)
700
-
280.8
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy gauge PVC conduit pipe 20mm dia. (ISI marked) Flushed
3160
-
57.4
... More
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
5560
-
67.2
... More
Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed
1700
-
121.8
... More
Heavy gauge PVC conduit pipe 32mm dia. (ISI marked) Flushed
350
-
92.4
... More
Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
-
-
-
... More
PVC flexible pipe 40mm dia.
500
-
33
... More
Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe complete with as required:-
-
-
-
... More
PVC compression Socket gland 40mm dia.
200
-
31
... More
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
... More
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan.
1408
-
125
... More
COPPER EARTHING :-
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
2
-
10578.4
... More
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
... More
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)
40
-
326.2
... More
COPPER EARTHING :-
(Upto 14 metre in Length):-Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
28
-
17715.6
... More
Additional Length 20mm x 3mm thick Copper Tape .
1000
-
491.4
... More
MCB'S & MCB DISTRIBUTION BOARDS:
-
-
-
... More
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Single Pole 6-32amp. (10kA, Curve-C)
1572
-
180.9
... More
MCB Four Pole 40amp. (10kA, Curve-C)
42
-
1453.95
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
36
-
1661.85
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
... More
TP&N Vertical Double Door Distribution Board 4 way each.
2
-
6422.75
... More
TP&N Vertical Double Door Distribution Board 8 way each.
44
-
8085.65
... More
TP&N Horizontal Double Door Distribution Board 4 way each
1
-
2766.9
... More
TP&N Horizontal Double Door Distribution Board 6 way each
22
-
3409.75
... More
TP&N Horizontal Double Door Distribution Board 8 way each
9
-
4071
... More
Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-
-
-
-
... More
Cable End Box for TPN Vertical 4/8/12Way
46
-
1710.8
... More
RISING MAIN & MCCB'S:
Rising Main 250Amp. & 500Amp.:
Boys Hostel = 160Amp. (Emergency), 250Amp. (Normal)
-
-
-
... More
Supply, Installing testing and commissioning of 160A, Air Insulated Type Rising Mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos. aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every meter, continuous earthing with 2 Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Schneider, C&S
36
-
7970
... More
Supply, Installing testing and commissioning of 250A Air Insulated Type Rising Mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos. aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every meter, continuous earthing with 2 Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Schneider, C&S
76
-
8178
... More
Supply, installation, testing & commisioning of 160 Amp Main End Feed Unit Box (with provision of MCCB but without MCCB )on the existing Air Insulated rising mains for use on 3 phase 4 wire 415 V, 50Hz A.C supply with Flange End, Rotary Handel, box made with 1.6mm thick G.I sheet steel enclosure (IP54) duly powder coated complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Schneider, C&S
2
-
9748
... More
Supply, Installing testing and commissioning of 100A, Air Insulated Type Rising Mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos. aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every meter, continuous earthing with 2 Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required complete in all respects as approved and desired by the Engineer-in-charge at site.
40
-
7730
... More
Supply, installation, testing & commisioning of 100 Amp Main End Feed Unit Box (with provision of MCCB but without MCCB )on the existing Air Insulated rising mains for use on 3 phase 4 wire 415 V, 50Hz A.C supply with Flange End, Rotary Handel, box made with 1.6mm thick G.I sheet steel enclosure (IP54) duly powder coated complete in all respects as approved and desired by the Engineer-in-charge at site.
2
-
9669
... More
Supply, installation, testing & commisioning of 250 Amp Main End Feed Unit Box (with provision of MCCB but without MCCB )on the existing Air Insulated rising mains for use on 3 phase 4 wire 415 V, 50Hz A.C supply with Flange End, Rotary Handel, box made with 1.6mm thick G.I sheet steel enclosure (IP54) duly powder coated complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Schneider, C&S
4
-
10773
... More
Supply, installation, of Tap off box for with provision of MCCB/MCB Four Pole 40-63-100Amp. (Excluding MCCB Cost) complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Schneider, C&S
52
-
7039
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's: (USED AS A OUTGOING PANEL FOR MCB DB'S Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
-
-
-
... More
TP&N Double Door Vertical DB's 4 way each (With provision of FP MCCB upto 125amp)
2
-
7250.75
... More
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Triple Pole 40amp. (10kA, Curve-C)
8
-
1258.2
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubicle type) in the existing Cubical Panel (conforms to IEC:60947-II) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD General Specifications (Electrical Works) complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with sutiable size of Thimbles etc.
-
-
-
... More
MCCB Four Pole 40amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting (for LDB tap off)
18
-
6290.2
... More
MCCB Four Pole 40/63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
66
-
6290.2
... More
MCCB Four Pole 250amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
2
-
13533.8
... More
MCCB Four Pole 160amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
4
-
9627.8
... More
MCCB Four Pole 250amp., 415volts, ≥36kA Microprocessor Based Adjustable Thermal and Magnetic Setting
4
-
24500
... More
INDOOR LT CABLES, CABLE TRAY & DWC PIPE:
-
-
-
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
... More
Overall size 16sq.mm (4Core) Un-armoured (Loose)
100
-
125
... More
Overall size 50sq.mm (3½ Core) Un-armoured (Loose)
200
-
252.5
... More
Overall size 185sq.mm (3½ Core) Un-armoured (Loose)
800
-
821.25
... More
Overall size 70sq.mm (3½ Core) Un-armoured (Loose)
200
-
350
... More
Overall size 240sq.mm (3½ Core) Un-armoured (Loose)
200
-
1057.5
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
... More
Double walled corrugated (DWC) HDPE pipe 63/51 mm (outer/ inner dia.)
80
-
148
... More
Double Walled Corrugated HDPE Pipe 90/76mm (Outer/ Inner dia.)
160
-
189
... More
Double walled corrugated (DWC) HDPE pipe160/136mm (outer/ inner dia.)
1170
-
324
... More
INDOOR LT PANELS:
-
-
-
... More
MAIN LT PANEL (FOR BOYS HOSTEL):
-
-
-
... More
Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacture should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP44).
Fabrication: Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS:8623. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar channel as well as the cable chamber should be totally isolated from the feeder chamber. Where the crossing of the wire or bus link should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition. The base channel will be made out of 75mm x 40mm x 5mm rolled channel. "The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc.
-
-
-
... More
Painting: The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work. Busbars: The panel shall be provided with TPN copper busbar of suitable size according to the size of MCCB's. All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.
Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard). The Concerned contactor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of ACB/MCCB's to be installed in the cubical panel Enclosure (including the cost of MCCB's+E.R.H.) as per following.
-
-
-
... More
Incomer:
■ Air Circuit Breaker Four Pole, 800amp., 415volts (Electrical Draw-Out Type) = 1No .
Outgoings: ■ MCCB 400A, 415V breaking capacity ≥36kA 4P microprocessor based adjustable thermal and magnetic protection = 3Nos.
■ MCCB 250A, 415V breaking capacity ≥36kA 4P microprocessor based adjustable thermal and magnetic protection = 1No.
■ 100amp. 415 volts breaking capacity ≥25kA four pole fixed magnetic & adjustable thermalsetting MCCB unit = 2Nos. ■ All Incomers & Out going With Extendable Rotary Handle with adjustable depth complete as per schematic diagram attached & Satisfaction of the Engineer in charge at site.
Enclosure: Panel Size: As per Norms
Panel builders Make: Kalyani Switchgear, ETE Electrogears, Power Associates, Unix, CMKL
3
-
512700
... More
SUB LT PANEL (EMERGENCY) FOR BOYS HOSTEL:
-
-
-
... More
LT PANELS & MCCB's (MOULDED CASE CIRCUIT BREAKERS):
Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).
Fabrication: Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.
Painting: The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work .
-
-
-
... More
Busbars: The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:-
-
-
-
... More
LT Panel enclosure having space for 1No. Incomer MCCB 250Amp. and 6Nos. outgoing MCCB's 40amp. to 125amp. according to the requirement at site (Approx. size 1300 x 1650 x 400mm) (DETAIL SEE IN PANEL INVENTORY)
3
-
91370.95
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc
-
-
-
... More
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
14
-
7351.4
... More
MCCB Four Pole 160amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
4
-
10689
... More
MCCB Four Pole 250amp., 415volts, ≥36kA Microprocessor Based Adjustable Thermal and Magnetic Setting
2
-
24703
... More
MCCB Four Pole 250amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
-
14595
... More
LED'S FIXTURES & FANS:
-
-
-
... More
Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Philips BN02IC LED20S PSU CW GRS2, Havell's ENDURALINEARNEOBS20WLED865SPCWH, Crompton CCS-103-20-65-SL-DP-NWH, Wipro LL20-281-XXX-65 ALI, Panasonic PBTM08208, Bajaj BCLAB 20W WH LED P
426
-
736
... More
Supply and erection of LED batten 40watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Wipro LL24-541-XXX-57XX, Bajaj Cat No. BCLAB SP 44L LED CW PC SD, Philips Cat No. BN100C LED40S-6500 PSU L120 GR, Crompton CCS-100-65-DP-NWH, Havell's STOUTPLUS1200BS40WLED857SPCWH
1723
-
1050
... More
Supply and erection of Ceiling Fan 1200mm (48") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. Makes: Crompton High Speed Opel White, Orient- New Breeze, Havell's Velocity HS or equivalent.
1116
-
2781
... More
Supply and erection of Heavy duty Exhaust Fans 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. Make: Crompton EXHD300-6-1, Havells Turbo Force SP, Orient (Heavy Duty)
86
-
4222
... More
Supply and erection of Ceiling mounted Occupancy based PIR sensor (360 degree)with installation height 2.5mts ,8.5 Amps resistive load, Detection dia 8M,time delay - 5s to 59 mins , Light level threshold - 5 to 1275 Lux ,IP - 20,Sensitivity Adjustment, Walk LED test, with additional options like walkthrough, daylight set point, vacancy . MAKE: Legrand (048807) / Wipro (GLPS01S010A) / Hager (EE815). or equivalent (In OPD Cabin & Toilet Blocks)
72
-
5963
... More
Supply and erection of Recessed mounted 36watt LED panel (including LED driver) with CRCA sheet having efficacy of LED fixture more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021.
230
-
4073
... More
Povision of Cultural Cess on Gross Amount
0.01
-
458443712.47
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements