Public Works Department Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Jan 2025
Closing Date7 Feb 2025
Tender Amount₹ 25,97,893
Costs
EMD
₹ 51,958Document Cost
₹ 5,000Tender Fee
₹ 3,066
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEPW_133427_1Tender No
15 dated 23.01.2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Scraping complete in all respects.
644.14
37
24432.23
... More
20mm thick cement plaster 1:4 in two coat work complete in all respects.
644.14
277
178471.87
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
729.54
84
61485.63
... More
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
729.54
93
68401.67
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
35.98
69
2501.69
... More
Providing and fixing partition upto ceiling height
consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ role form G.I. sheet with zinc coating of grade 175 consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm and 0.5mm thick fixed to the floor and ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5mm diameter, 40mm length and the studs 48mm wide having one flange of 34mm and other flange
36mm and 0.50mm thick fixed vertically within
flanges of floor and ceiling channel and placed at
a spacing of 610mm centre to centre by 6mm dia
bolts and nuts at both ends of partition fixed flush
to wall with rawl plugs at spacing 450mm centre to
centre and fixing of boards to either side of frame
work by 25mm drive all screws on studs, floor and
ceiling channels at the spacing of 300mm centre
to centre, including jointing and finishing to a flush
finish with recommended jointing compound,
jointing tape, joint finisher and two coats of primer
suitable for board as per manufacture’s
specificatior and direction of engineer-in-charge
all complete.
79.15
1262
99894.42
... More
Providing & fixing wooden frame for fixed glazing & Door Chowkhat having sal wood section 50mm x 75mm, 6mm thick waterproof ply on both sides finished with 1mm thick mica complete as per architect drawing & as desired by Engineer-in-Charge
25.91
2076
53805.22
... More
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the
same in position Commercial with elm or gurjan
facing on both \ Sides with laminated core and lipped edges:-
9.75
2430
23696.6
... More
Providing & Fixing decorative high pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
9.75
1171
11422.03
... More
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)
For shutter area above 0.50sqm.
9.75
261
2547.38
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete in all respects.
I.S.I Designation No. III (size of door 851mm to 1000mm)
8
1380
11040.72
... More
Supplying Pressed steel sheet frames (chowkhat)
consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete in all respects.
Doors and windows frame of size 151mmx 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
2.44
603
1473.71
... More
Providing and fixing mineral fibre false ceiling tiles at all
heights of size 595X595mm of approved texture, design
and pattern. The tiles should have Humidity Resistance
(RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance
as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully
threaded hanger rod up to 1000 mm length and L-shape
level adjuster of size 85x25x2 mm, spaced at 1200 mm
centre to centre along main ‘T’. The system should rest
on periphery walls /partitions with the help of GI
perimeter wall angle of size24x24X3000 mm made of
0.40 mm thick sheet, to be fixed to the wall with help of
plastic rawl plug at 450 mm centre to centre & 40 mm
long dry wall S.S. screws. The exposed bottom portion
of all T-sections used in false ceiling support system
shall be pre-painted with polyester baked paint, for all
heights. The work shall be carried out as per
specifications, drawings and as per directions of the
engineer-in-charge.
With 16mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595X595mm
80.54
1436
115733.56
... More
Providing and Fixing ceiling consisting of 12.5mm
thick Gypsum Board of any size G.I. Cradling
hanged from the ceiling by means of G.I. hanger
complete as per drawings,specifications and tothe
entire satisfaction of engineer-in- charge.
28.61
1391
39815.68
... More
Renewing glass panes with putty and
nails wherever necessary (Glass panes weighing 10.75 Kg/sqm.)
2.88
642
1850.8
... More
Terracing consiting of tiles 22.86x11.43x3.83cm
laid over 25 mm mud plaster 7.5 cm mud filling on
another layer of 25mm mud plaster including two
coats of bitumen laid hot at 1.65 Kg. /Sqm top of
R.C.C. slab including grouting with cement sand
mortar 1:4 and top surface to be left clean after
wire brushing complete in all respects.
219.71
758
166654.43
... More
Cutting of floor topping of concrete / Kota Stone/ any kind of marble/ tile floor depth up to 50mm with the help of mechanical cutter and chisel (with due care so that surrounding floor should not be damage) to lay the tactile flooring 300mm wide including cost of providing and laying 25mm to 28mm thick cement concrete 1:2:4 as per requirement complete as per specification, Harmonised guidelines for PwD and as desired by Engineer-in-charge.
7.99
529
4233.98
... More
Providing and Laying Tactile Flooring full body
vitrified , low water absorption below 5%, having
excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability)
7.99
1906
15235.65
... More
First class burnt brick work laid in cement sand mortar 1:4 in first story upto 4 mtr above plinth level complete in all respects.
8.04
5559
44700.23
... More
Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications.
16.99
492
8374.54
... More
Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type complete in all respects.
5.66
4246
24034.68
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
Size 600x600 mm
37.18
1500
55776.69
... More
ELECTRICAL WORKS
-
-
-
... More
Providing Internal Electrical Installations:
-
-
-
... More
POINT WIRING:
-
-
-
... More
REPLACEMENT OF WIRES, SHEETS, SWITCHES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH FLUSH PIANO TYPE ACCESSORIES) Derived From CSR 34.03: Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp., 16Amp. universal sockets, 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Brass Screws, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material and repair of chases (with finsihing the surface):- (Derived From CSR 34.03)
-
-
-
... More
Wiring fan point (Without fan box)
13
663
8628.17
... More
Wiring light point
32
367
11772.16
... More
Wiring call-bell point
3
370
1111.23
... More
Wiring 3 pin 6 Amp. wall socket point
5
327
1637.15
... More
Wiring 3 Pin 6 Amp. Plug control comprising wall socket point
5
194
973.45
... More
Wiring 3 pin 16/20 amp. power plug control point
9
238
2150.37
... More
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface)
-
-
-
... More
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
6
826
4960.74
... More
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):-
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface)
-
-
-
... More
Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).
10
707
7079.5
... More
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):-
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface)
-
-
-
... More
Wiring Telephone socket point RJ11 (one module)
4
355
1420.96
... More
Wiring Networking socket point RJ45 (one module)
10
461
4614.3
... More
SUPPLY AND ERECTION OF WIRING ACCESSORIES:
Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-
-
-
-
... More
Call Bell 220/230 volts AC Ding Dong
3
132
396.18
... More
PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge
-
-
-
... More
Overall size 1sq.mm (Un-sheathed)
260
19
4984.2
... More
Overall size 1.5sq.mm (Un-sheathed)
570
24
14050.5
... More
Overall size 2.5sq.mm (Un-sheathed)
1200
36
44376
... More
Overall size 4sq.mm (Un-sheathed)
360
53
19227.6
... More
Overall size 6sq.mm (Un-sheathed)
25
73
1849
... More
Overall size 10sq.mm (Un-sheathed)
160
120
19283.2
... More
Overall size 16sq.mm (Un-sheathed)
160
187
30020.8
... More
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
... More
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan.
14
131
1843.63
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications
-
-
-
... More
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
145
70
10266
... More
Heavy gauge PVC conduit pipe 32mm dia. (ISI marked) Flushed
130
97
12654.2
... More
Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed
85
128
10907.2
... More
Supply and erection of PVC flexible pipe complete without compression glands,locking arrangement, check-nuts as required:-
-
-
-
... More
PVC flexible pipe 40mm dia.
30
17
537.3
... More
8 SWG COPPER EARTHING :Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
8
11144
89154.72
... More
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)
170
343
58420.5
... More
SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-
-
-
-
... More
Ceiling Rose (Flush Piano type)
15
36
545.25
... More
MINIATURE CIRCUIT BREAKERS:-
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs
-
-
-
... More
MCB Single Pole 6-32amp. (10kA, Curve-C)
38
190
7242.04
... More
MCB Four Pole 40amp. (10kA, Curve-C)
2
1531
3063.48
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
1
1750
1750.76
... More
MCB Triple Pole 40amp. (10kA, Curve-C)
2
1188
2377.96
... More
MCB Triple Pole 50, 63amp. (10kA, Curve-C)
2
1325
2651.02
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc
-
-
-
... More
SP&N Double Door Distribution Board 12 way each
1
1797
1797.9
... More
TP&N Horizontal Double Door Distribution Board 4 way each.
1
2914
2914.93
... More
TP&N Horizontal Double Door Distribution Board 6 way each.
1
4288
4288.8
... More
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
-
-
-
... More
TP&N Double Door Vertical DB's 4 way each (With provision of FP MCCB upto 125amp)
1
7638
7638.67
... More
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
... More
MCCB Four Pole 200amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
12864
12864.08
... More
MCCB's (FOR PANELS & SHEET ENCLOSURE): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
... More
MCCB Four Pole 200amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
13982
13982.05
... More
MS SHEET ENCLOSURE FOR MCCB's: Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:-
-
-
-
... More
MS Sheet Enclosure having provision for MCCB 200-630Amp.with extended rotary handle (Approx. Size 750mm x 300mm x 250mm)
1
6221
6221.13
... More
ON LOAD CHANGEOVER SWITCH (With Sheet Enclosure): Supply and erection of On Load Change over Switch with advance neutral UNIT in sheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-
-
-
-
... More
On Load Change Over Switch Four Pole 200amp., 415volts (With Sheet Enclosure)
1
14824
14824.22
... More
XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
-
-
-
... More
Overall size 50sq.mm (4Core) Un-armoured (On-Surface)
80
310
24862.4
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
... More
Overall size 50sq.mm (4Core) Un-armoured (Loose)
40
291
11641.18
... More
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
7
848
5936
... More
Supply and erection of 3-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.
13
3564
46332
... More
Supply and erection of Heavy duty Exhaust Fans 300mm sweep 900RPM complete with aluminium louver shutter
Canon Make, double ball bearing, longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
1
4890
4890
... More
Supply and erection of Plastic Body 200MM, 8" Ventilation Fan including flexible wire & petty material etc. for
connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
2
1935
3870
... More
Supply and erection of Surface mounted 36-40W LED 1x4 Panel (including constant LED driver) with CRCA Sheet having efficiency of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
22
6207
136554
... More
Providing PA System along with allied accessories:
-
-
-
... More
Single zone desktop paging microphone with a sturdy , aluminium die- cast top and special high reiability switches with intergarded LED indicators . Fitted with a flexible 300mm (12") gooseneck and a high quality unidirectional dynamic cartidge .supplied with 6mtrs. twin core sheilded low noise cable with 6.3mm (1/4") phon plug . frequency response 50-10000hz sensitivity 2.0mv /pa imepdence 600 ohms complete in al resects as approved and desired by the engineer in charges at site
2
13269
26538
... More
supply , installation, testing & commissioning of 60 watt pa mixer amplifier , 4x mic & 1 aux inputs , pre amplifier output for connecting to a booster amplifier and for recording the programme,instand transfer to dc power if ac power fails, cut typr bass and treble controls , 90watt mx , 65 watt rms at 10% thd , 60watt at 5% thd , 2db , no load to full load at 1khz , 4x mic 0.65mv/4.7kohms , 1x aux 100mv /470ohms , 50-15000hz-/+3db, signal to noise ratio 60db, bass :-10db at 100hz , treble :-10 at 10khz,preamp 200mv/600ohms ,4,8,16ohms and 100v , ac 220-24050/60hz , dc 12v car battery , ac : 160va dc 3a, dimensions:- W 350xH120xD265mm, weight : 7.00kg
2
22515
45030
... More
Supply , insttallation, testing & commissioning of Slim, compact , aesthetically designed column speakers. Off-white colour to integrated with most interiors. Aluminium extruded cabinet with moulded plastic covers, metal mesh grille. 100V line matching transformer with rotary switch for power tap selection. Input Power: 10W RMS 15W Max. Power Taps: 10/7.5/5/2.5W. Impedance /Voltage 100V Frequency Response 150-15000Hz, SPL at 1kHz: 90dB/1W/1m, Speakers 2X 127mm (5") X 76.2mm (3"), Dimensions W115 X H389 X D89mm, Weight: 1.90kg complete in all respects as approves and designed by the engineer in charge at site.
4
2542
10168
... More
Supply, Installation, Testing and Comissioning of Wall Mount 9U x 600 W x 600 D , Front Glass Door (tinted, Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails with U-Marking , Welded Side Walls, Min Accessories : 1U Cable Manager (1), Hardware Packet (1 Pkt), 6 Socket 5 Amp. Power Distribution Unit (1 No), Roof Mounted Fan Unit / 90 CFM /230V AC. as per DIN 41494 Standards.
2
13090
26180
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
... More
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
60
70
4248
... More
PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE:
-
-
-
... More
Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
Overall size 1.5sq.mm (48/0.20mm), 2Core
80
47
3834.4
... More
Providing EPABX System:
-
-
-
... More
Supply Installation Testing Commissioning of Analog phone with caller id and hand free facility
4
2498
9992
... More
Supply Installation Testing Commissioning of 50 Pair MDF with Krone
1
4114
4114
... More
SITC of 20 Pair PVC insulated Cable
100
186
18600
... More
SITC of unarmoured 2 Pair 0.5mm ABC conductor PVC insulated Cable for Telephones in existing Conduit.
240
40
9600
... More
Providing Networking System along with allied accessories:
-
-
-
... More
Supply, Installation and Comissioning of 24 port POE 1 GbE L2+switch with 4X1GbE SFP (upgradeable to 10 GbE) uplink ports complete in all respects to the entire satisfication of the Engineer Incharge
1
81352
81352
... More
Supply, Installation and Comissioning of CAT 6 24 port punchdown panelshall be terminate 4 pair , 22/26 AWG,100ohm unshielded twisted pair cable. complete in all respect as per satisfaction of the Engineer in charge of the work.
1
5339
5339
... More
Supply, Installation and Comissioning of cat 6 UTP Patch Cord shall be constructed of 24 AWG unshielded twisted pair copper cables 1 mtr complete in all respect as per satisfaction of the Engineer in charge of the work.
10
159
1590
... More
Supply, Installation and Comissioning of cat 6 UTP Patch Cord shall be constructed of 24 AWG unshielded twisted pair copper cables 2 mtr complete in all respect as per satisfaction of the Engineer in charge of the work.
10
184
1840
... More
Supply, Installation, Testing and Commissioning of Category 6, RJ45, 8position, 8 wire universal module (I/O) with Single gang, 86mm x 86mm shuttered faceplate with label slot. Accepts Dual Modules complete in all respect to the entire satisfaction of the Engineer in-charge.
10
254
2540
... More
Supply, Installation, Testing and Commissioning of Wall Mounted rack network rack 12U 500d, with heavy duty exturded aluminium frame for rigidity, fan 90CFM 230V AC, cable manager 1U MS with loops shelf, PDU 6 sockets 5amp with MCB mounting hardware (packet of 20) complete in all respects as approved and desired by the Engineer in-charge at site.
1
7627
7627
... More
Supply Installation, Testing, commissioning of Cat 6 Cable should be Unshielded Twisted Pair cabling system TIA/EIA-568-C.2 Cat 6 cabling system. Conductor should be 23 AWG: solid bear copper cable should be ETL verfied UListed and UL channel verified all three certificates are mandatory. Cable should be system warranty. Warranty to cover the bandwidth of the specified and installed cabling system and installation costs. Site certificate should be issued by the OEM Frequency tested should be upto 600MHz. Minimum should be packing box of 305 m. complete in all respects as approved and desired by the Engineer in-charge at site.
500
48
24000
... More
Supply, Installation, Testing & Commissioning of 1 KVA UPS with Input power factor correction - 0.99, Output power factor - 0.8, OVCD inbuilt , DC V 36v, Efficiency : Above 90% True onliine double conversion internal bypass LCD status display intelligent battery charging, automatic periodic battery self test, sine wave output serial connectivity Generator compatiable with wide input voltage range ,output voltage regulation ,frequency regulation etc with SMF VRLA UPS battery 12 V 26 AH 2 Nos ensures long life suitable for charging 12 volt DC power backup with suitable mettalic battery rack & UL listed battery interlinks including petty material required during installation,including connection & testing charges etc.complete in all respects as approved and desired by the Engineer in-charge at site.
1
28071
28071
... More
PUBLIC HEALTH WORKS
-
-
-
... More
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
... More
CPVC SDR 11 Pipe & fitting 16mm o/d
40
188
7531.2
... More
SDR 11 CPVC pipes & fittings 20mm o/d
30
233
6995.7
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.
-
-
-
... More
Size 75 mm x 75 mm
40
72
2907.6
... More
Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee)
complete in all respects.
2
395
790.78
... More
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
-
-
-
... More
15mm i/d G.I. Union
4
95
383.48
... More
20mm i/d G.I. Union
4
158
635.6
... More
Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
-
-
-
... More
Chinaware Floor Mounted One Piece EWC rim less type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) size 69x36x74 cm with P trap or S trap and seat cover complete in all respect
1
17403
17403.82
... More
Providing and fixing vitreous Chinware chinware 10 Ltr. Capacity with PVC internal fitting (Size 34.x 50 x 22.5 cm) of approved make(to the approval of the Engineer-in-charge) including PVC fittings and brackets complete.
1
4297
4297.23
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect.
-
-
-
... More
Size 550 mm x 400 mm x 815 mm
1
2046
2046.95
... More
Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
-
-
-
... More
Vitreous chinaware standard white pedestal for wash hand basin.
1
2117
2117.54
... More
Providing and fixing PTMT Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms of approved make (to the approval of Engineer-in-charge) for wash hand basin and sink complete in all respect..
1
571
571
... More
Providing and fixing in position C.P. Brass Auto close bib Cock of approved make (to the approval of Engineer-in-charge)
2
2480
4961.98
... More
Providing and fixing in position C.P. Brass Auto close Pillar Cock of approved make (to the approval of Engineer-in-charge)
2
2637
5275.92
... More
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
C.P. Brass fittings:
-
-
-
... More
C.P.brass 15mm Angular stop cock with Wall flange
4
1079
4319.36
... More
C.P. Brass Accessories:
-
-
-
... More
C.P. brass towel rail 600 mm long
1
1390
1390.62
... More
C.P. brass soap dish holder with glass dish
1
688
688.99
... More
C.P. brass toilet roll holder with flap
1
1174
1174.65
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
4
191
766.96
... More
Providing and fixing jet spray with 2'-6" long PVC pipe.
With C.P. Brass nut
1
501
501.47
... More
Providing and fixing in position automatic brass Ball Cock in tanks.
-
-
-
... More
Brass Ball Cock with rod and Plastic Ball 40mm i/d
1
1798
1798.63
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
-
-
-
... More
Triple Layer Tanks
2000
11
22760
... More
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect.
-
-
-
... More
G.I. tank nipple 32mm i/d
2
280
560.7
... More
G.I. tank nipple 40mm i/d
2
377
754.2
... More
Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
-
-
-
... More
32mm i/d Gun Metal peet valve heavy pattern.
2
1245
2490.32
... More
40mm i/d Gun Metal peet valve heavy pattern.
2
1648
3296.46
... More
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse
sand).
23.78
1155
27482.31
... More
Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).
-
-
-
... More
Size 600x600 mm
5.85
1104
6458.81
... More
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping using mechanical mixer for mixing of material
5.85
155
912.13
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggreate 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material
5.85
424
2483.68
... More
Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good the same & finishing according to existing finish where required.
-
-
-
... More
Through floor or roof 11.5cm thick
2
153
306.38
... More
Through floor or roof 22.50cm thick
2
210
421.28
... More
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
... More
Through wall 11.43 cm thick
2
176
352.84
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
-
-
-
... More
Size 600mmx450mm
1
1263
1263.15
... More
Extra for providing and fixing G.I. 32mm waste pipe for urinal including elbow, reducer etc complete in all respect.
2
445
891.26
... More
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.
3
116
349.74
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining
-
-
-
... More
For 110mm o/d pipes
-
-
-
... More
P Trap/Floor Trap 110mm x 75mm
4
309
1239.96
... More
Providing, installing tesing and commissioning of 5 star ceiling mounted split type Air Conditioner with 100% copper coil material (Evaporator and condesor) complete in all respect.
-
-
-
... More
1.50 Ton capacity
2
52000
104000
... More
Supplying and placing in position reputed make voltage stablizer complete as desired by the Engg.-in Charge.
-
-
-
... More
For 1.50 Ton capacity Air Conditioner
2
2400
4800
... More
Providing and fixing indoor-outdoor refrigent copper pipe with insulation sleeves suitable for 1.50 ton AC capacity.of standard make I.S.I mark
8
984
7872
... More
Providing and fixing electric wire/cable of required at site as per site condition
12
110
1320
... More
Providing and fixing Drain Pipe of required at site as per site condition
8
55
440
... More
Cutting chase in brick walls in cement or in floor for embeddding G.I. or C.I pipes line and making good the same to its original conditions
-
-
-
... More
size 150 mm x 150 mm
8
120
960.8
... More
Providing & fixing MS Stand for External Unit
2
590
1180
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements