Public Works Department Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Public Works Department - PWD Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date10 Jul 2024
Closing Date25 Jul 2024
Tender Amount₹ 5,35,28,432
Costs
EMD
₹ 10,70,600Document Cost
₹ 30,000Tender Fee
₹ 5,900
Summary
Construction Of Tehsil Complex With Fard Center And Without Patwar Station At G
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CEPW_123718_1Bid Award Id
ViewTender No
01 dated 10/07/2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
327.82
2045531
6239.8
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
427.23
94520
221.24
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
119.81
668018
5575.65
Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.
-
-
-
Lintels
-
-
-
Total all Floor
17.15
115937
6760.23
Extra rate for First Floor
5.49
1046
190.68
Extra rate for Second Floor
3.09
1178
381.37
Extra rate for Third Floor
0.49
280
572.05
Shelves
-
-
-
Total all Floor
1.67
11289
6760.23
Extra rate for First Floor
0.37
70
190.68
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.
-
-
-
Beams
-
-
-
Total all floor
120.19
844926
7029.92
Extra rate for First Floor
49.32
9404
190.68
Extra rate for Second Floor
18.43
7028
381.37
Extra rate for Third Floor
3.12
1784
572.05
Columns (Rectangular & Square)
-
-
-
Total all Floor
109.31
768440
7029.92
Extra rate for First Floor
45.73
8719
190.68
Extra rate for Second Floor
17.7
6750
381.37
Extra rate for Third Floor
1.47
840
572.05
Slab
-
-
-
Total qty for all floor
255.08
1793191
7029.92
Extra rate for First Floor
103.64
19762
190.68
Extra rate for Second Floor
34.24
13058
381.37
Extra rate for THird Floor
4.68
2677
572.05
Cement concrete 1:3:6 with stone ballast or shingle 40 mm guage. using concrete mixing volumetric type
8.25
37369
4529.6
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
-
-
-
Total qty for all floor
2075.5
1163234
560.46
Extra rate for First Floor
838.37
8836
10.54
Extra rate for Second Floor
269.69
5682
21.07
Extra rate for Third Floor
38.61
1220
31.61
Centring and shuttering for Columns ( Square or Rectangular or ply gonal in plain)
-
-
-
Total qty for all floor
1198.08
602059
502.52
Extra rate for First Floor
365.84
3855
10.54
Extra rate for Second Floor
207.6
4374
21.07
Extra rate for Third Floor
11.76
371
31.61
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
-
-
-
Total qty for all floor
1098.72
439850
400.33
Extra rate for First Floor
438.48
4621
10.54
Extra rate for Second Floor
172.16
3627
21.07
Extra rate for Third Floor
28.88
912
31.61
Centring and shuttering for stair cases with sloping with
soffits including risers and stringers.
-
-
-
Total qty for all floor
77.14
36245
469.86
Extra rate for First Floor
23.51
247
10.54
Extra rate for Second Floor
12.79
269
21.07
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
-
-
-
Total qty for all floor
327.35
1872435
5719.98
Extra rate for First Floor
113.07
17391
153.81
Extra rate for Second Floor
63.69
19592
307.62
Extra rate for Third Floor
26.13
12057
461.43
Extra rate for Fourth Floor
2.48
1525
615.24
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure.
-
-
-
Total Qty for all floor
642.84
498503
775.47
Extra rate for First Floor
257.99
4076
15.8
Extra rate for Second Floor
95.2
3009
31.61
12.5mm thick cement plaster 1:5.
-
-
-
Total all floor
1521.86
294586
193.57
Extra rate for First Floor
650.05
1371
2.11
Extra rate for Second Floor
193.33
813
4.21
Extra rate for Third Floor
32.33
204
6.32
20 mm thick cement plaster 1:5 in two coats work.
1521.86
402592
264.54
Extra rate for First Floor
650.05
1371
2.11
Extra rate for Second Floor
193.33
813
4.21
Extra rate for Third Floor
32.33
204
6.32
12.5 mm thick cement plaster 1:4.
941.25
190132
202
Extra rate for First Floor
291.5
615
2.11
Extra rate for Second Floor
249.33
1049
4.21
Extra rate for Third Floor
127.93
808
6.32
20 mm thick cement plaster 1:4.
941.25
261893
278.24
Extra rate for First Floor
291.5
615
2.11
Extra rate for Second Floor
249.33
1049
4.21
Extra rate for Third Floor
127.93
808
6.32
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS Clamp
U-PVC pipes (working pressure 4kgf. / sqcm)
pipe 110 mm dia.
186.53
49519
265.48
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
UPVC 110 mm bend
23
3271
142.22
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
23
2035
88.49
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
23
2425
105.47
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
23
16652
724.04
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
23
2021
87.87
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
-
-
-
Total qty for all floor
880.3
691475
785.5
Extra rate for First Floor
539.6
1705
3.16
Extra rate for Second Floor
253.83
1604
6.32
Extra rate for Third Floor
29.16
276
9.48
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
246.12
17587
71.46
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taken only from outside the premises laying in plinth in 15 cm layers including ramming, watering and consolidating including all leads.
610.63
295874
484.54
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
367.5
24390
66.37
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
786.22
381065
484.68
Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufacture guidelines.
3.15
881
279.93
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
-
-
-
Total qty for all floor
778.97
158364
203.3
Extra rate for First Floor
563.75
1781
3.16
Extra rate for Second Floor
215.22
1360
6.32
Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.)
230.61
43243
187.52
Providing and laying vitrified floor tiles in
different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have
pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
Size 600x600 mm
-
-
-
Total Qty for all floor
1320.8
1982983
1501.35
Extra rate for First Floor
567.04
1791
3.16
Extra rate for Second Floor
218.35
1379
6.32
Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm.
1393.77
182068
130.63
Conglomerate floor 50mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material)
3.16
1241
392.84
Supply & Fixing of door frames (Chowkhats) consisiting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (base steele as per IS : 513) with zinc of 120gm/sqm & Powder coated with pure Polyster powder upto 50 micrones (as per approved colour), 3 Nos 100mm butt-hinges 2mm thick, 6 Nos M.S hold fast with split and tail welded to stiffner plate 200mm long, Receiver for aldrop, M.S tie rod 50mmX 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.60mm of approved shade, fixed in position, including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire stasfication of Engineer-in-Charge.
-
-
-
Doors frame of size 80mm X 50mm with 37mm wide single rebate for 35mm door shutter.
346.01
412637
1192.56
Doors frame of size 125mm X 60mm with 37mm wide double rebate for 35mm door shutter.
34.63
54249
1566.55
Supply & Fixing of Window frames (Chowkhats) including mullions consisiting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steele as per IS : 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position by means of PVC & metal hold fastner with PVC cap complete in all respects as per drawing, design, specification & entire stasfication of Engineer-in-Charge.
-
-
-
Windows Outer frame of size 72mm x55mm and central mullion 72 mm x 50mm with Double rebate.
982.25
1078264
1097.75
Supply & Fixing of Window shutter consisiting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steele as per IS : 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position by means of screws, complete in all respects as per drawing, design, specification & entire stasfication of Engineer-in-Charge.
-
-
-
Glazed Windows shutter Section 47mm x 20mm (Without Glass)
114.55
641526
5600.41
Wire Mesh Windows shutter Section 40mm X 20mm with S.S wire mesh 32 gauge flymesh with 144 holes per square inch
114.55
652025
5692.06
Providing & fixing fixed beeding 12mm X 12mm for fixed glass with Eco fixed gasket (EPDM)
844.53
213530
252.84
Providing and fixing glazing in door, window, ventilator shutters and partitions etc, complete as per the architectural drawings and the directions of engineer-in-Charge (Cost of gasket/beading shall be paid as per respective item)
-
-
-
Float glass panes of 5mm thickness
257.42
210173
816.46
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1) (1999)
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-
-
-
-
35mm thick
120.48
292817
2430.42
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
For shutter area above 0.50 sqm
157.79
18451
116.94
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
300mm x 16mm
15
3144
209.65
250mm x 16mm
34
6554
192.79
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
34.42
371699
10798.95
Marble stone flooring with 12-15 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
Udaipur Green Marble Tiles of thickness 12mm to 15mm
Slabs sizes above 0.50 sqm
-
-
-
Total Qty for all floor
248.97
302876
1216.52
Extra rate for First Floor
43.54
137
3.16
Extra rate for Second Floor
26.69
168
6.32
Marble work of thickness 12-15 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).
Udaipur Green Marble Tiles of thickness 12mm to 15mm
Slabs sizes above 0.50 Sqm
-
-
-
Total Qty for all floor
46.93
73357
1563.12
Extra rate for First Floor
14.49
45
3.16
Extra rate for Second Floor
7.8
49
6.32
Extra for marble stone flooring in treads of steps and risers using single length
up to 2.00 metre.
-
-
-
Total Qty for all floor
46.93
21061
448.79
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete
I.S.I Designation No. III (size of door 851mm to 1000mm)
63
86945
1380.09
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro- hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.
IS COde : 15658 (2006)
33.64
23101
686.72
Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours.
8.41
575
68.48
Providing and Laying Out Door Precast Designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3(1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
18.11
19634
1084.17
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
-
-
-
Total Qty for all floor
33.35
115266
3456.26
Extra rate for First Floor
9.81
31
3.16
Extra rate for First Floor
9.81
62
6.32
Providing & fixing 16 guage stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainles steel pipe, Balusters of 40mm dia stainless steel pipe complete in all respects.
732.3
371078
506.73
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) :
-
-
-
For fixed portion & Chaukhat
305.42
113258
370.83
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
298.48
115717
387.69
Providing Polyster Powder coating 50 micron any coloured specrified to aluminium section of various sizes including carrriage of material from marktet to workshop ..
603.9
43263
71.64
Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge.
4mm thick ACP Sheet
29.79
74379
2496.8
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
-
-
-
With Float glass panes of 5mm thick
7.26
7916
1090.37
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge.
4
7846
1961.62
Providing & Fixing DIAS consisting of teak wood frame work ,20mm thick water proof teak ply board, 12 mm thick water proof ply, finished with polishing painting as per shade approved by the engineer-in-charge,handles, hinges, locks complete as per drawing.
3
352698
117566
Providing and laying Laminate wooden flooring (Grade AC4 or AC4+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer.
50.17
108145
2155.58
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending.) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
71.64
93133
1300.02
Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability)
72.97
139610
1913.26
Extra rate for First Floor
22.99
72
3.16
Extra rate for Second Floor
5.02
31
6.32
Providing and Fixing of Copper Sheet 16 Gauge 350mm wide on expansion joint including covering with C. Concrete complete in all respect as per specifications.
16.38
75410
4603.8
Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allow movement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
54.86
31266
569.94
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
-
-
-
Total Qty for All Floor
1476.44
11629785
7876.91
Extra rate for First Floor
463.64
6351
13.7
Extra rate for Second Floor
133.22
3648
27.39
Extra rate for Third Floor
16.97
697
41.09
Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits.
(a) 50 mm thick
150.99
207424
1373.76
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.
1398.28
415415
297.09
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
6400.97
539473
84.28
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
4441.97
98256
22.12
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
4441.97
416479
93.76
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
271.08
12279
45.3
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
271.08
7996
29.5
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
278.2
7032
25.28
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
549.28
38191
69.53
Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
685.65
111959
163.29
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
1273.35
160976
126.42
Construction of Plinth protection complete as per drawing.
-
-
-
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
12.77
2448
191.74
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
5.11
18984
3715.22
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.
12.26
69377
5658.88
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
40.26
19513
484.68
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
60.38
20718
343.14
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
26.84
5195
193.57
Dismentling of Existing unsafe Building i.e SDM Office, Tehsil Building, Deed Writer, Canteen & Parking
-
-
-
Stripping and stacking slate or tiles of a roof.
1621.02
75134
46.35
Earth work of silt clearance of channels and drains:-
Kassi work undressed involving an average horizontal throw up to 2 metres and average vertical lift up to 0.5 metres
202.63
16437
81.12
Dismantling brick work tile, masonry or tile lining In cement
1079.35
775502
718.49
Dismantling concrete Reinforced cement concrete
305.14
708507
2321.91
Removing doors and windows together with the dismantling of walls
-
-
-
Doors
55
6837
124.31
Windows
71
5909
83.23
Ventilator
51
4244
83.23
Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base.
1645.57
188960
114.83
Disposal of Malba ouitside the premises including loading and unloading as desired by Engineer in charge.
367.19
83032
226.13
Credit of Material to be received from dismentling
-
-
-
Tile from dismenling of tile terracing
36001
-144004
4
Bricks from dismenling of Brick work
311040
-1244160
4
Brick/Tile bats
457.94
-243166
531
Old Doors Complete set as fuel wood
55
-44000
800
Old Window Complete set as fuel wood
71
-56800
800
Old Ventilator Complete set as fuel wood
51
-20400
400
Old/ Rusted Steel from Dismentling of RCC
183.08
-549240
3000
Outer infrastructure Construction of Internal Approach Road, Parking/pavement & Footpath
-
-
-
Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications.
3594.98
1859287
517.19
Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
360.82
1521469
4216.7
Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with cement contents 350kg per cum and coarse and fine aggregates conforming to IS:383 mixed with concrete mixer using computerized concrete batch mixing plant including carriage by transit mixer with in 1km lead . , laid in position over 125 micron thick polythene sheet, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, including provision of contraction and expansion joints as required, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications
87.45
526462
6020.15
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
18.04
3991
221.24
Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M-35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.
1794.78
1291128
719.38
Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours.
358.96
24581
68.48
Construction of footpath with Interlocking pavers, Kerb
-
-
-
Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications
536.04
201920
376.69
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
367.62
178178
484.68
Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro- hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt. ( Also not to used over footoaths).
367.62
236460
643.22
Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours.
73.52
5034
68.48
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior sufrace
241.22
5335
22.12
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
241.22
16772
69.53
Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability)
36.42
69680
1913.26
PUBLIC HEALTH SERVICES
-
-
-
Sub Work-1
-
-
-
Sub Head-1 Internal Sewerage System
-
-
-
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
251.75
99733
396.16
75mm o/d SWR UPVC pipe lines laid complete
153.31
47038
306.82
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm o/d pipes
-
-
-
Elbow 90 Degree (All side socketed)
25
4064
162.57
Vent Cowls
12
544
45.4
Coupler
65
7220
111.09
Single Tee With Door
14
3308
236.32
For 75mm i/d pipes
-
-
-
Elbow 90 degree (all side socket)
7
522
74.71
Vent Cowls
7
220
31.43
Coupler
47
3511
74.71
Single Tee With Door
7
1113
159.11
Floor Trap 110mm x 75mm
17
5269
309.99
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
-
-
-
110mm o/d
316
32001
101.27
90mm o/d
221
18941
85.71
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
M.S. Holder bats clamps for 100mm i/d as per table-1
36
7818
217.18
M.S. Holder bats clamps for 75mm i/d as per table-1
21
4259
202.84
Core cutting in RCC slab 125mm dia or 150mm dia withe the help of core cutting machine as per requirement at site & as desired by Engineer-in-Charge.
45
31005
689
Providing and fixing galvonised hanging clamp 100mm dia chimney type for PVC pipe, 12mm galvonised fully thread bar with nut bolt as per requirement at site & as desired by Engineer-in-Charge.
45
17595
391
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
10
19300
1930.01
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
10
67803
6780.33
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects.
-
-
-
uPVC Pipe 6 Kgf/cm2
50mm i/d as per table-1
48.77
8850
181.47
Sub Head-2 Internal Water Supply System
-
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
CPVC SDR 11 Pipe & fitting 16mm o/d
58
10920
188.28
SDR 11 CPVC pipes & fittings 20mm o/d
140
32646
233.19
CPVC SDR 11 Pipe & fitting 25mm o/d
96
28899
301.04
CPVC SDR 11 Pipe & fitting 32mm o/d
-
-
-
CPVC SDR 11 Pipe & fitting 50mm o/d
45.72
36162
790.96
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
198
14392
72.69
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
Through wall 11.43 cm thick Detail as per Table-2
31
5469
176.42
Through wall 22.86 cm thick Detail as per Table-2
19
4782
251.71
Providing, fixing and jointing Upvc Union Couplings with Upvc Pipes complete in all respect.
-
-
-
15mm i/d G.I. Union
12
1011
84.29
20mm i/d G.I. Union
26
3560
136.96
25mm i/d G.I. Union
26
4656
179.11
32mm i/d G.I. Union
-
-
-
50mm i/d G.I. Union
8
3371
421.43
Providing, fixing and jointing CPVC Ball valves screwed with CPVC ball & spindle & Teflon seats, on CPVC Pipe lines including all carriages complete.
-
-
-
20mm i/d Brass Ball valves
10
3567
356.76
25mm i/d Brass Ball valves
4
2223
555.85
50mm i/d Brass Ball valves
4
7186
1796.53
Providing and fixing in position Chinaware Indian Orisa water closet size 580 x 440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.
Detail attached as per Table-3
9
50470
5607.78
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
Detail attached as per Table-3
10
50357
5035.73
Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
Chinaware wall mounted E.W.C without
cistern including seat cover complete in
all respect.
Detail attached as per Table-4
3
31187
10395.94
Providing and fixing in position Metropole flush valve push type 32mm size dual flow (Concealed body) with exposed shut off provision and round plate complete in all respect.
Detail attached as per Table-3
3
10271
3423.88
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut
Detail attached as per Table-3
13
4957
381.37
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Detail attached as per Table-3
13
1136
87.44
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube
connection 300 mm long complete.
10
69014
6901.48
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 49 cm dia (above counter round)
12
59543
4961.99
Size 550 mm x 400 mm x 815mm
5
19036
3807.35
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
12
12161
1013.47
Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.
-
-
-
Double bowl Sink without drain board Overall size 1114 x 490 mm with bowl size 460x385x200mm including waste coupling
1
14549
14549.89
Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm
2
16308
8154.09
Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
3
6352
2117.54
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 375 mm with PTMT nut
49
5988
122.21
Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.
28
3333
119.05
Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-in-charge) complete in all respect.
3
3546
1182.03
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
C.P. brass towel Rails size 15mm dia 610mm long
3
4864
1621.34
C.P brass towel ring
10
9597
959.74
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
10
8881
888.1
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
C.P. brass Bib cock long nose/ long body without flange
16
19435
1214.69
C.P Brass bib cock foam flow without flange
19
18355
966.06
Providing & Fixing in postion CP Brass Spout Operated Pillar Tap with base flange (for foot operated valve) of approved make (to the approval of Engineer-in-charge) complete in all respect (instead of Pillar tap in Lavatory Suites). Detail as per Table-3 & 4
14
9999
714.27
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P.brass 15mm Angle valve without flange
50
43509
870.19
C.P.brass 15mm Concealed stop cock with flange
10
12684
1268.41
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
113
7499
66.37
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.
C.P. Brass extension piece, 25mm long to 50mm long
53
5974
112.72
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
17
21473
1263.15
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge.
-
-
-
C.P. Brass fittings:
-
-
-
C.P. brass Bib cock with wall flange
3
5082
1694.03
C.P. brass 15mm Concealed stop cock with adjustable wall flange with seal.(Outer +Inner Body)
12
19380
1615.02
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
C.P. Brass Accessories:
-
-
-
C.P. brass soap dish
3
2066
688.99
C.P. brass toilet roll holder with flap
13
15270
1174.65
CP brass Acrylic Shelf size 460mmx130mm
3
3523
1174.65
C.P. Brass Accessories:C.P. brass towel bracket (610mm long)
3
8855
2951.91
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
21
8119
386.63
Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval of Engineer-in-charge) of size 600 mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect.
12
6130
510.84
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
4000
45520
11.38
Providing and fixing in position automatic brass Ball Cock in tanks.
Brass Ball Cock with rod and Plastic Ball
-
-
-
Brass Ball Cock with rod and Plastic Ball 32mm i/d
2
3199
1599.98
Providing and fixing in position cPVC. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25mm i/d
6
1192
198.82
G.I. tank nipple 40mm i/d
4
1508
377.1
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
-
-
-
For 2000 ltr Water Tank
2
14114
7057
Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.
-
-
-
35mm dia 900mm (36”) long
2
3666
1833.09
35mm dia 1200mm (48”) long
2
5619
2809.68
Foldable U Type 762mm long
2
13305
6652.85
Sub Head-4 Flooring and Wall Tile
-
-
-
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
-
-
-
Ground Floor
51.11
23153
453.01
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
-
-
-
Total All Floor
57.58
10494
182.26
Extra rate for First Floor
57.58
181
3.16
Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete .
-
-
-
Total All Floor
108.69
96641
889.15
Extra rate for First Floor
57.58
181
3.16
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
57.58
30365
527.36
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
-
-
-
Total All Floor
496.79
365836
736.4
Extra Rate for First Floor
249.65
788
3.16
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
-
-
-
Total All Floor
8.8
30389
3453.37
Extra Rate for First Floor
4.4
13
3.16
Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.)
17.53
3287
187.52
Sub Head -5 Drinking Water Coller
-
-
-
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
Water Cooler Full Steel Body 150/150 ltr without Stablizer
Detail as per Table-3
1
46849
46849.15
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
1
13369
13369.97
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
-
-
-
Automatic Voltage Stablizer 2 KVA for Drinking water cooler
1
5008
5008.44
SubWork - 2
-
-
-
Sub Head-1 Estate Water Supply
-
-
-
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
-
-
-
Earth work upto 1.5 m. Depth All classes of soil except rocky
-
-
-
For 50mm pipe line
58.18
6073
104.4
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
-
-
-
50mm i/d
112.54
81243
721.91
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
-
-
-
50mm i/d G.I. Union
2
875
437.68
Providing & fixing C.I indicating plates of size 100mm x 100mm for SV/FH including synthetic enammel paint & letters in white enamel paint , fixing in the ground with angle iron of size 25x25x5mm, 230mm height from ground including concrete block complete in all respect as directed by Enginner-in-Charge.
2
504
252.2
Sub Work-3
-
-
-
Sub Head-5.1
-
-
-
Sub Head-1 Estate Sewerage
-
-
-
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
-
-
-
110 mm o/d pipes
63
37751
599.23
160 mm o/d pipes
132.78
166425
1253.39
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
-
-
-
For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L.
For all classes of soil except rocky
140.76
17053
121.15
Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.
21.87
15042
687.83
Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard
-
-
-
Inside size 75x120 cm
-
-
-
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
-
-
-
For depth not exceeding 3.0 m B.G.L.
For all classes of soil except rocky
32.62
3402
104.3
Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
3.94
15021
3812.62
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth
11.58
62327
5382.33
Cement Concrete 1:2:4 with stone ballast or shingle.using concrete mixing volumetric type
1.99
9790
4919.85
Floating coat of 1:5 mm thick neat cement laid in one operation to the topping
7.2
219
30.55
12.5 mm thick cement plaster 1:3
40.76
9146
224.4
Cement rendering on plaster 1mm thick
40.76
2533
62.16
Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
2.82
15308
5428.69
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
2.26
15468
6844.59
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design
40
8807
220.18
Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).
RCC Man hole cover with Frame
560mm i/d RCC man hole cover with frame as per ISI
8
14403
1800.43
Making connection of newly laid sewer in walls of existing manhole of fully charge sewer including cost of pluging sewer, desilting, removal of sullage water and making good of khudda
-
-
-
Sewer connections upto 300 mm id
1
6384
6384.21
Sub Work-4
-
-
-
Fire Fighting Arrangements
-
-
-
Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
4.5kg capacity
12
85802
7150.19
Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 6kg Capacity
12
35283
2940.3
SITC of MS Pipe
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
-
-
-
65mm internal diameter
3
2580
860.26
80mm internal diameter
3
3137
1045.77
100mm internal diameter
30.48
46267
1517.95
SITC of Butterfly valve
Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.
-
-
-
100 mm i/d
3
10293
3431.04
Proving & fixing Dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete.
-
-
-
100mm i/d check valve
3
14065
4688.57
Providing and fixing S.S Pressure Gauge complete as required complete in all respect.
-
-
-
Dial diameter 100mm calibration 0-16 Kg
3
2428
809.63
Providing and fixing fire brigade inlet connection of cast iron body with Gun metal 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904. (to be connected to static tank).
-
-
-
Four Way inlet connection
1
9743
9743.88
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Double Layer Tanks
10000
91900
9.19
Providing and fixing in position automatic brass Ball Cock in tanks.
Plastic Ball Cock with rod and Plastic Ball
-
-
-
Brass Ball Cock with rod and Plastic Ball 25mm i/d
2
1409
704.93
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25mm i/d
4
795
198.82
Providing, fixing and jointing Cpvc Union Couplings with Upvc Pipes complete in all respect.
-
-
-
25mm i/d cpvc. Union
4
716
179.11
Construction of Foundation for PVC water storage tank including RCC slab
-
-
-
For 5000 Ltr Capacity
2
19866
9933
Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 meter long type-2, hose reel Drum with bracket as per IS:884, 20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with main pipe complete in all respect.
3
28596
9532.07
Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A, IS:636, 63mm dia x 15m long with gunmetal male & female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required.
3
14133
4711.09
Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc.
-
-
-
600 mm wide x 600 mm high x 300 mm deep Size - (for RRL Reel)
3
12972
4324.3
Supplying & fixing air vessel made out of 250mm. Dia, 8 mm thick MS sheet, 1200mm height with air release valves on top and flanged connection to risers, drain arrangements with 25 mm dia gunmetal wheel valves, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required
1
18343
18343.56
Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all respect
1
3799
3799.27
Supplying and Installation control valve C/W water motor gong complete with alarm Valve, constant trim, water motor bell, 2No. Pressure Gauge. All parts UL listed. complete in all respect.
-
-
-
100 mm control valve
1
27843
27843.88
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).
Class PN-1 as per IS
-
-
-
100mm i/d Sluice Valves flanged
3
18049
6016.61
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts.
-
-
-
100mm internal diameter
110
267150
2428.64
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
-
-
-
Earth work upto 1.5 m. Depth All classes of soil except rocky
72.6
7579
104.4
Supply Installation, testing & commissioning of pump having 65mm suction, 50mm delivery, CI casing, bronze impeller and C-40 shaft with gland packed arrangement coupled on common base plate to Make Kirloskar/ABB/CGL (at our option) 7.5 kw/10HP, 2935RPM TEFC sq cage induction motor supply confirming to through suitable flexible coupling The pump set is suitable for following duties the pump is designed following duties total head 35 mtr flow 450 LPM including cost of Electrical control panel complete in all respect as per specifications.
1
42142
42142.86
XLPE INSULATED ARMOURED CABLES (UNDERGROUND):
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1metre below ground level including excavation, sand cushioning, covering with sand & First Class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-
-
-
-
Overall size 16sq.mm (3Core) Armoured (Underground)
18
8960
497.78
Sub Head-4.2 Construction of UGSR 50000 ltr capacity including pump station for fire fighting
-
-
-
Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.
75.92
6638
87.44
Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
9.49
36181
3812.62
Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and without vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
12.46
74795
6002.84
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
10.64
2353
221.24
Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and without vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
-
-
-
Beams
1.05
6302
6002.84
Slab
9
54025
6002.84
walls
24.15
156646
6486.4
Extra rate for Smooth Surface of RCC
243.6
13653
56.05
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
35.05
239902
6844.59
Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pillasters, buttersses etc when curved.
169.49
79458
468.81
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
48.49
27176
560.46
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
2.32
928
400.33
First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.
3.43
18613
5426.58
12.5mm thick cement plaster 1:5.
11.83
2255
190.68
12.5mm thick cement plaster 1:4.
37.28
7422
199.11
Providing and fixing stair case railing made out of M.S. square bars 20mm x 20mm as vertical part 0.70 m high fixed with M.S. base plate of 40mm x 40mm x 6mm and flat iron 40mm x 6mm as hand rail complete in all respect.
3.66
3501
956.58
Supplying and fixing of Pressed steel sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiveing tower bolts and finished with 2 coats of ready mixed painted lead non setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
-
-
-
Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
12.5
6992
559.41
Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitred and electrically flash-welded, with iron fittings incluidng necessary iron handles,hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire guage) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire guage and grill will be paid as per respective items)
60.75
8192
134.85
Extra for providing & fixing Steel Tube beading size 12mm x 12mm, 18 guage of approved shape and section with screw for fixing of glass panes in stead of glazing clips and metal slash putty in steel doors, windows & Ventilators complete in all respect
12.34
873
70.8
Wire gauge fixed on steel windows of standard rolled steel section, with 3mm thick flat iron cover moulding of 12.5mm width, fixed with machine screws, complete in all respects.
0.94
897
954.47
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
0.3
2888
9628.99
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm thick above 0.40 sqm area.
1.88
1184
629.99
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
8.05
203
25.28
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
8.05
559
69.53
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
49.11
7139
145.38
Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).
R.C.C. Manhole cover 560mm i/d RCC man hole cover with frame as per ISI
2
3600
1800.43
Foot Rest for Manhole.
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.
14
3082
220.18
Diesel Engine
Supply, installation, testing & Commissioning of pump model in back pull out design (end suction type) having 100mm suction, 80mm delivery, CI casing, bronze impeller and CS shaft with gland packed arrangement coupled on common baseplate 37KW/50 HP, 2900 RPM TEFC sq. cage induction motor suitable for 3 phase, 415V, 50Hz AC supply confirming to through suitable flexible coupling. The pumpset is suitable for following duties: Total head : 60m Flow : 137 m^3/hr(1620 Ipm)
1
591537
591537.78
Electric Pump
Supply, installation, testing & Commissioning of MAKE FACTORY ASSEMBLED DIESEL ENGINE DRIVEN PUMPSET in back pull design having 125mm suction, 100mm delivery, CI casing, bronze impeller, C-40 shaft with gland packed arrangement coupled on common MS fabricated baseframe vertical water cooled diesel engine complete with 12 V battery start arrangement, air cleaner, exhaust silencer(without piping), fuel filter, developing 56 bhp at 2500 RPM. Engine with twin belt driven radiator and complete with engine starting panel, Battery & AVM pods. Total head : 60m Flow : 137 m^3/hr(1620 Ipm)
1
279952
279952.96
Jockey Pump
Supply, installation, testing & Commissioning of Kirloskar make pump in back pull out design having 50mm suction, 32mm delivery, CI casing, bronze impeller and CS shaft with gland packed arrangement coupled on common baseplate 7.5KW/10 HP, 2900 RPM TEFC sq. cage induction motor suitable for 3 phase, 415V, 50Hz AC supply confirming to through suitable flexible coupling. The pumpset is suitable for following duties: Total head : 60m Flow: 10.8 m^3/hr(180 lpm)
1
115792
115792.31
Control Panel
Providing & fixing of Hydrant Electrical Panel of cubical type floor mounted power cum control of Jockey Pump 1 No. & Electrical Pump 2 No. having MCCB 400 Amp 3 Pole 36 KA, MCCB 180 Amp 3 Pole Contactor 110 Amp. Contactor 180 Amp Realy 66-110, Realy 14-23,SSP ,SP,MCCB 63 Amp, 3 Pole, Digital Meter Set, Hardware, Aluminium Bus bar Set, Wire & Thimble, Panel Box 16 Gouge. Complete in all respect as per specifications.
1
42145
42145.91
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).
Class PN-1 as per IS
-
-
-
150mm i/d Sluice Valves flanged
2
17828
8914.18
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts.
-
-
-
100mm internal diameter
9
21857
2428.64
150mm internal diameter
66
232457
3522.09
Sub Work-5
-
-
-
Roof Top Rain water Harvesting
-
-
-
Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.
-
-
-
110mm o/d pipe of 10 Kgf. / sqcm
48
15486
322.64
200mm o/d pipe of 10 Kgf. / sqcm
124.51
131262
1054.23
Excavation in trenches with straight or open cutting in a street, lanes or in a open area with 3D/JCB or excavator including manually dressing bed, trimming sides & slide slope for sewer & manhole to full depth as shown in drawing, including, dressing to correct sections and dewatering, provision for diversion for traffic,protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching etc. fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level removal of surplus spoils from the site of works upto chain (15 m), complete in all respects.
-
-
-
For depths not exceeding 3.0 metre B.G.L.
For all classes of soil except rocky
112.7
11754
104.3
Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.
2.61
1795
687.83
Construction of Haudi internal size 0.90mtr x 0.90mtr & 0.90mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x600 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge
12
128928
10744
Construction of Haudi internal size 0.45mtr x 0.45mtr & 0.45mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x450 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge
16
68368
4273
Construction of Rain water recharge well 3.00mtr dia with working depth 3.50mtr dia consisting of drilling bore 300mm dia 35mtr, supplying and lowering pvc perforated housing pipe 200 mm dia 10kgf/sqcm 50mtr sorrunded with filtermedia , galvanised stainer CI pipe Class LA 150mm i/d 4mtr duly plugged from top with bail plug, fixing MS clamp, MS socket, Well size 3.00 mtr internal dia, 4.00 mtr deep constructed with BB in 1:5 cement sand mortar,plastered from inside, RCC slab, filtered media in 3 Layers, 2Nos RCC Man hole cover conneted with collecting chamber size 1mtr x 1mtr x 1.20 mtr deep providing and fixing MS grating and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge . (Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates).
1
420718
420718
Providing Internal Electrical Installations
-
-
-
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring fan point (With fan box)
101
122231
1210.21
Wiring light point
212
161643
762.47
Wiring call-bell point
8
5952
744.03
Wiring 6Amp. wall socket point
37
22900
618.93
Wiring 6Amp. Plug control comprising wall socket point
15
5570
371.36
Wiring 16/20Amp. power plug control point
22
10516
478.03
Wiring light point with double control switches.
8
10608
1326.09
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
26
21496
826.79
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).
35
24778
707.95
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):-
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring Telephone socket point RJ11 (one module)
12
4262
355.24
Wiring Networking socket point RJ45 (one module)
17
7844
461.43
PVC INSULATED FR COPPER CONDUCTOR CABLES:
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
Overall size 1.0sq.mm (Un-sheathed)
800
15336
19.17
Overall size 2.5sq.mm (Un-sheathed)
700
25886
36.98
Overall size 4sq.mm (Un-sheathed)
1800
96138
53.41
Overall size 6sq.mm (Un-sheathed) (Earthing)
350
25886
73.96
Overall size 10sq.mm (Un-sheathed)
640
77132
120.52
Overall size 16sq.mm (Un-sheathed)
846
158734
187.63
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
Overall size 25sq.mm (3½ Core) Unarmoured (Loose) (For Light Load)
20
3292
164.61
Overall size 35 sq.mm (3½ Core) Unarmoured (Loose) (For Power Load)
50
10206
204.12
Overall size 95 sq.mm (3½ Core) Un-armoured (Loose) (PSPCL to Main Panel
100
45301
453.01
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan. (Main Building)
130
17119
131.69
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
1250
88500
70.8
Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)
155
19889
128.32
Heavy Gauge PVC Conduit Pipe 50mm dia. (Flushed)
155
27433
176.99
Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
-
-
-
PVC Flexible Pipe 25mm dia.
30
537
17.91
G.I. EARTHING:
Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 14 metre in length (including boring & refilling).
-
-
-
Earthing with 7/12 S.W.G. (7/2.80mm dia.) G.I. rope in 20mm dia G.I. pipe with G.I. reducing socket 50mm x 20mm (upto 14Metre in length)
4
23224
5806.1
Bonding to existing earth with G.I. wire/ rope in heavy gauge (1.6mm thick) welded conduit pipe (Flushed in wall) with bends, junction boxes and Steel hooks including the cost of cutting and filling up of chases (with finishing the surface):-
-
-
-
Bonding with G.I. rope 7/12S.W.G. (7/2.80mm dia) in HGW conduit pipe 25mm dia. (Flushed)
60
13432
223.87
COPPER EARTHING (Upto 14 metre in Length):
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length) (Pedestal Panel)
2
37326
18663.38
COPPER EARTHING STRIP (As Additional Length):
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
-
-
-
Additional Length 20mm x 3mm thick Copper Tape (Pedestal Panel)
20
10353
517.69
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
MCB Single Pole 6-32amp. (10kA, Curve-C)
144
27443
190.58
MCB Triple Pole 40amp. (10kA, Curve-C)
6
7133
1188.98
MCB Triple Pole 50, 63amp. (10kA, Curve-C)
6
7953
1325.51
MCB Four Pole 40amp. (10kA, Curve-C)
5
7658
1531.74
MCB Four Pole 50, 63amp. (10kA, Curve-C)
4
7003
1750.76
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
TP&N Horizontal Double Door Distribution Board 4 way each.
4
11659
2914.93
TP&N Horizontal Double Door Distribution Board 6 way each.
4
14368
3592.17
TP&N Horizontal Double Door Distribution Board 8 way each.
1
4288
4288.8
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
-
-
-
TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB upto 125amp.)
1
9669
9669.18
TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB 160amp.)
1
10403
10403.37
SHEET METAL BUS BAR CHAMBERS (COPPER STRIPS):
Supply and erection of sheet metal busbar chamber (factory fabricated) duly powder coated on existing surface with required 4Nos. of tin plated copper busbar strips of suitable length and crosssectional area mounted on DMC/ SMC moulds at sufficient distance, enclosure made of M.S. sheet 1.6mm thick with hinged cover and lock, fitted with dust excluding gaskets and secured with sufficient no. of cadmium plated iron screws and of given overall dimensions and to be fixed with G.I. bolts and nuts/ rag bolts and nuts etc. complete with all accessories including connections with suitable size of thimbles, bonding to the existing earth and painting etc. as desired by the Engineer-in-charge at site:-
-
-
-
Bus Bar Chamber 200amp., 415volts Overall Dimensions (350mm x 450mm x 150mm) nominal
1
7906
7906.31
ON LOAD CHANGEOVER SWITCH (With Sheet Enclosure):
Supply and erection of On Load Change over Switch with advance neutral UNIT in sheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-
-
-
-
On Load Change Over Switch Four Pole 200 amp., 415volts (With Sheet Enclosure)
1
14824
14824.22
MCCB's (MOULDED CASE CIRCUIT BREAKER):
-
-
-
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links , rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
7744
7744.7
MCCB's (MOULDED CASE CIRCUIT BREAKER):
-
-
-
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links , rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
160amp. 415 volts breaking capacity ≥35kA four pole adjustable thermal and magnetic protection MCCB unit
1
11260
11260.86
MCCB Four Pole 200amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
13982
13982.05
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 63/51mm (Outer/ Inner dia.)
60
9355
155.92
Double Walled Corrugated HDPE Pipe 120/103.5mm (Outer/ Inner dia.) (PSPCL to Main Panel)
90
26169
290.77
SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT LINE ITEMS, MS CHANNELS, BRASS GLANDS, ALUMINIUM & COPPER THIMBLES: CUBICAL PEDESTAL:
Supply and erection of Sheet metal cubical pedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4" hinges & locking system with single/ double door openable placed on MS strip of size 12.5mm x 2.5mm thick welded with MS sheet, 4Nos. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs. Front door welded x-sectionally with MS flat 25mmx5mm. The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high and pedestal with 4 Nos. supporting members each of MS flat 50mmx6mm thick according to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint & bonding to the existing earth. The Pedestal platform should be filled with 1:2:4 cement concrete mixture and erected 150mm high from the top of the cement concrete platform. The job is to be completed as approved by Engineer-in-charge:-
-
-
-
Cubical Size 1400mm high, 1200mm wide and 500mm deep with platform dimensions 1300mm x 600mm x 450mm
1
26065
26065.91
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
85
66385
781
Supply and erection of 3-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.
101
358449
3549
Supply and erection of Heavy duty Exhaust Fans 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
14
63490
4535
S/E of Surface LED 1'x4' 40Watt Panel Ceiling light with high performance, commercial grade full diffuser providing uniform light with efficacy of LED fixture 100 lumens per watt (Minimum) and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021
121
664774
5494
Providing Security Lighting
-
-
-
XLPE INSULATED ARMOURED CABLES (ON SURFACE):
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
-
-
-
Overall size 10sq.mm (2Core) Armoured (On-Surface) (Flood Light)
180
24888
138.27
Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:-
-
-
-
SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement
6
4576
762.73
Supply and Erection of LED Flood Light 120 Watt LED (Inlcuding LED driver) with pressure die cast aluminium, operating voltage between 140 to 270 volt complete along with erection of the same with connections, testing etc. Complete in all respect as approved and desired by the Engineer-In-Charge at site. LED fitting as per specifications approved by Hon. Tech. Advisor to CM Punjab vide ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021.
6
57684
9614
Providing LIFTS 1No.13 Passengers-G+2
-
-
-
*Supply, Installation, Testing and Commissioning of 1 Nos. Lift of 13 Passengers Machine Room Less.
*Type and Capacity : Approximately 884 Kg ,13 Passengers
*Speed:1.0 Meter per second
*Type of drive: AC Variable Voltage Variable Frequency with 16-Bit Microprocessor.
*Motor: Permanent Magnet Gearless Machine to be hoisted on the top of guide rail within the elevator hoist way
*Travel: Approximately 8 meter
*Serving: _3 Floors _3 Stops _3 Openings _3 Levels (All on the same side)
*Hoist way Required : 2600mm (Wide) x 1900mm (Deep) Clear dimensions
*Headroom Height (HR): 5000 mm beyond finished floor level of last landing
*Pit Depth : 1600mm below the finish floor level of first landing
*Car Size Area: Minimum 2.06 square meter and Maximum 2.20 square meter
*Car Enclosure : Constructed out of stainless steel Scratch proof Finish (Vandal Proof).
*Car Entrance: Center Opening Automatic Doors with vision panel (upto 40% area should be visible by glass in doors) of Stainless steel finish panel in Scratch Resistance/ Vandal proof with a clear opening of 900mm (wide) x 2100mm (high)
*Door operation : Automatic DC Door operation with adjustable door opening and closing timings
*Control: Simplex full selective collective control with and without attentdent
*Operation: Automatic
*Power Supply: 415 Volts, 3- phase, 50Hz Alternating Current
*Flooring: Floor Skid - Resistant as per standard
*Fan: Blower Fan in Car for ventilation with Auto cut off
*Lighting: LED for Car Lighting
*Indicators: LED Dot matrix / Digital 3 segement direction and position indicators in the car and at all landings
*Hand Rail: Stainless Steel round Hand rail not less than 600mm long at 900mm above floor level (Side LH,Side RH & Rear)
*Call Button Height: Call button (Outside the lift) placed at a height between 800mm-1meter from the floor level
*Control Panel Height: Control panel placed at a height between 800mm-1meter from the floor level
* Std. Govt. features.
-
-
-
Other Features :
1. Battery operated emergency light with rechargeable battery
2. Battery operated emergency alarm with rechargeable battery
3. Adjustable Guide shoes
4. Micro movement LED based buttons
5. Door Open and Close buttons
6. Emergency Intercom provided inside the elevator
7. Emergency Intercom usable without the voice communication
8. Load weighing device with overload bypass feature and Overload function with Audio Visual Indication
9. Steel items, door frames sill angle's, fascia plates, spring buffers
10. Automatic phase reversal device and Phase Failure protection
11. Call registration
12. Audio & Video System installted in the lift indicating arrival at a floor
13. Manual break lever
14. Additional car gate lock
-
-
-
15. Automatic break testing infrared safety curten
16. Braille Buttons (Inside and outside) with Braille instructions for the communication system
17. Kick plate/Skirting
18. Lift anoucement system to announce floor level's in english language only and indication of door for entrance / exit is . either Open or Close
19. Car Operating Panel
20. Car plateform constructed out of cold rolled grain oreinted formed sheets of steel
21. Phase two device fire man drive
22. Fire Man switch at main lobby
23. Car false ceiling in stainless steel
24. Pit ladder
25. Anti Nuisance car call protection
26. Door Nudging
27. Automated Resuce Device to bring the elevator to the nearest landing in case of power failure.
-
-
-
Annexure-'A'
Specifications for Elevators as per requirement of Disability instructions.
1.1 Lifts
1.1.1 Lift signage
* Where lifts are provided in a building they shall be accessible to and usable by Persons with Disabilities at all levels used by the general public or staff. Lifts should be marked with the symbol of accessibility and directional signs be provided to the
lifts.
* Signs indícatíng the location of an accessible lift should be provided in a location that is clearly visible from the building entrance. The sign should incorporate a representation of the International Symbol for Access.
* A sign indicating the number of the floor should be provided on each lift landing on the wall opposite the lift. It is also recommended to install a floor directory of the main facilities and services available on the lift landing, along with an accessible emergency egress route that clearly indicates the location of nearest refuge areas for Persons with Disabilities.
1.1.2 Lift Size
The minimum.size of the lift should be 1500 mm wide by 1500mm deep;wherever possible, 13 passenger lift to be provided, which allows easy maneuverability of wheelchair user.
-
-
-
1.1.3 Door
* The lift door should have a clear opening of not less than 900 mm and contrasting in colour from the adjoining wall.
* There should be no difference in level between the lift door and the floor surface at each level.The gap between the lift door and building floor should not be more than 12mm.
* Time of closing of an automatic door should be more than 5 seconds and the closing speed should not exceed 0.25 meters per second.
1.1.4 Call Button
* The call button located outside the lift should: o Have a clear floor space of at least 900 mm x 1200 mm with no obstruction placed to prevent a wheelchair user from reaching the call button; and o Be installed at a height between 800 mm and 1000 mm.
1.1.5 Control Panel
The control panel should:
* Have a clear floor space of at least 900 mm x 1200 mm with no obstruction placed to prevent a wheelchair user from reaching it;
* Be placed at a height of between 800 mm and 1000 mm from the floor level; and * Have buttons with Braille/raised letters and in sharp contrast from the background to aid people with visual impairments.
-
-
-
1.1.6 Grab bars should:
* Be placed at a height of 900 mm from the floor Ievel ; and
* Be fixed on both sides and at the rear of the lift.
1.1.7 Audio and Visual Indicators
* The lift should have a voice announcement system along with a visual display to indicate the floor level and also the information that the door of the cage is open or closed for entrance or exit
* The announcement system should be clearly audible i,e. the announcement should be 50 decibel.
1.1.8 Other facilities
* The use of visually and acoustically reflective wall surfaces should be minimized within the lift car as visual reflections can cause discomfort and affect the visual acuity of people with visual impairments.
* The floor of the lift car should be slip resistant and have similar frictional qualities to the floor of the lift landing to decrease the risk of stumbling.
* The provision of a mirror on the wall of the lift car opposite the lift door is a positive aid to navigation for wheelchair users. It allows the wheelchair user to see if anyone is behind them and also to see the floor indicator panel. The mirror should not extend below 900 mm from the lift floor to avoid confusing people with impaired sight.
* The emergency communication system should be coupled with an induction loop system installed all around the lift. Telephone units, where provided, should have an inbuilt inductive coupler to assist persons using hearing aids.
1
1999800
1999800
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
Overall size 16sq.mm (4Core) Un-armoured (Loose)
20
2633
131.69
XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
-
-
-
Overall size 16sq.mm (4Core) Un-armoured (On-Surface)
30
4543
151.44
COPPER EARTHING :-
(8 SWG COPPER EARTHING :):-Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
6
66866
11144.34
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)
60
19557
325.95
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubicle type) in the existing Cubical Panel (conforms to IEC:60947-II) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD General Specifications (Electrical Works) complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with sutiable size of Thimbles etc.
-
-
-
MCCB Four Pole 40amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
3
19880
6626.73
MS SHEET ENCLOSURE FOR MCCB's:
Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:-
-
-
-
MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm)
3
10026
3342.12
Providing Local Area Networking
-
-
-
Supply, Installation and Comissioning of 24 Port unmanaged 10/100 Mbps Smart Data switch with 2 Combo10/100/1000 Mbps copper & SFP Port complete in all respect as per satisfaction of the Engineer in charge of the work.
1
26481
26481
Supply, Installation and Comissioning of Cat 6 Cable.Category 6 Unshielded Twisted Pair 23 AWG:305mtr. ,4 pair 100W cable shall be compliant with ANSI/TIA/EIA-568-C.2 Additional Transmission Performance Specifications for 4-pair 100W Category 6Cabling. Tested upto 600 MHZ; Construction: 4 twisted pairs separated by internal X shaped, 4 channel, polymer spine / full separator. Half shall not be accepted.Sheath : FRPVC/LSZH,Outer Diameter 6.1 mm nominal;Temperature Range -20° to +60°C.Manufacturer should have ISO 9001:2008 Certification for Quality Management System.Manufacturer should have ISO 14001:2004 Certification for Environmental Management System.All UTP and Its Components should be from same OEM complete in all respect as per satisfaction of the Engineer in charge of the work.
500
28500
57
Supply, Installation and Comissioning of Cat6 24 Port fullyloaded Patch Panel Rack Mountable for cable termination complete in all respect as per satisfaction of the Engineer in charge of the work.
1
7944
7944
Supply, Installation and Comissioning of Patch Cord 1 Mtr. Manufacturer should have ISO 9001:2008 Certification for Quality Management System.Manufacturer should have ISO 14001:2004 Certification for Environmental Management System complete in all respect as per satisfaction of the Engineer in charge of the work.
24
5016
209
Supply, Installation and Comissioning of Patch Cord 2 Mtr.Manufacturer should have ISO 9001:2008 Certification for Quality Management System.Manufacturer should have ISO 14001:2004 Certification for Environmental Management System complete in all respect as per satisfaction of the Engineer in charge of the work.
16
3632
227
Supply, Installation, Testing and Commissioning of 6U Wall mount 19’’ Rack with glass door,lock & key facility 450mm-550mm depth with CPD, Cable Manager & Fan complete in all respect as per satisfaction of the Engineer in charge of the work.
1
6885
6885
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
Make:- Anchor, Polycab, Norpack, Diplast.
-
-
-
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
570
40356
70.8
Solar Power Generation System
-
-
-
Supply, Installtion testing & commissioning of PV System Solar Power Plant (with Minimum 6hrs. batteries backup ) of Minimum 5KWp including required quantities of SPV modules (Hight Power density Perc Mococrytalline based) formed in to arrays, their mounting arrangement, Power conditioning units (i.e Solar Inverter), Solar Inverter 5KW with required Nos. of Batteries for minimum, required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board through cable tray Bi Directional Energy Meter required Earthing (i.e 2 Nos GI strip earthing for GI Strcuture, 2 Nos GI Strip earthing for string inverter, AC & DC Distribution system) Lightning protection system & 3 Nos chemical earthing with copper bonded rods along with high rise GI structure (Rated wind speed 170Kph) including mounting height up to 8 feet complete with transportaion, fabrication labour & civil work.
Features: 1. Solar PV Module warranty 25 Years & certified under IS/IEC 61730 I & II IS/IEC 61701 & IS/EC 14286
2. Power Conditioning unit (string solar inverter) & certified under IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-3, IEC 61683, EN 50530, IEC 60068-2-1, 2, 14, 30, EN 60529
3. Structure 25 Years service life with AMC & certified under IS 2062 2011
4. Complete Plant insurance for the period of 5 Years (Excluding Theft of the Material)
5. Annual Maintenance contract for the period of 5 Years
Make:
1 Solar PV Module: EMBRO, VIKRAM, ADANI, WAREE
2 Power Conditioning Unit: KEHUA, DELTA, LUMINOUS, SOLAX, TESA
3. Sloar Inverter: KEHUA, DELTA, LUMINOUS, SOLAX, TESA
4. Batteries: EXIDE, LUMINOUS, AMARON
3 AC/DC Distribution Board: EMBRO, ABB, SCHNEIDER ELECTRIC, HAVELL'S
4 Fusion Mount structure: TATA GALVUME, POSMAC
5 Lightning Arrester with chemical Earthing: SABO, JMC, TP, HIGH GRID
The work will got done from approved MNRE (Misitry of New and Renewable Energy) / PEDA (Punjab Energy Development Agency) contractor
The capacity of solar power plant may increase or decrease as availability of site it can also be totally removed by concerned Engineer-in-charge of work..
The Rate are inclusive of all taxes including GST.
5
569355
113871
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements