Public Works Department Tender

Making 50 mm x 50 mm furrows Making 50 mm x 50 mm furrows 45 degree to the centre line of road and at one metre interval in the existing bituminous wearing coarse including sweeping and disposal of excavated material within 1000 meters lead complete as per technical clause 404 of MORT&H specifications (Full surface area will be measured for payment.)

Earth work undressed with a combined lead upto 2 meters including breaking of cloads as per CSR item 6.2a

Brick on End Edging Providing and laying of brick on end edging 6.83 cm wide, 11.11cm long and 22.86 high half brick deep including excavation, refilling and disposal of surplus earth up to 50 mtr complete as per Punjab PWD specifications.

Relaying of recovered material obtained from dismantling of road crust

Providing, laying & spreading and compacting stone aggregates of Grading-II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the insterstices of coarse aggregate, watering and compacting to the required and compacting to the required density complete as per technical clause 404 of MORT&H specifications. CSR item No.24.13 (ii) as per AC Slip-2 dated: 07.02.2013

Providing, laying & spreading and compacting stone aggregates of Grading-III to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the insterstices of coarse aggregate, watering and compacting to the required and compacting to the required density complete as per technical clause 404 of MORT&H specifications. CSR item No.24.14 (ii) as per AC Slip-2 dated: 07.02.2013

Surface dressing Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications.

Tack coat with Bitumen VG-10 Bulk Providing and applying tack coat with penetration grade bitumen VG- 10 using bitumen pressure distributor @ of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications

Open - graded premix Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone agg regates of specified grading premixed in a continous type hot mix plant with bituminous binder VG-10 and plastic waste materials as per direction of E.E without any estra cost @ 1.46kg per sqm, carriage of mixed material to site of work and laid with paver finisher mechanically and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications.

Seal coat Providing and laying of premix sand seal coat premixed in continous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, carriage of mixed material to site of work, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications

Providing and making rumble strips 15-20mm high at centre, 250mm wide placed at 1m centre to centre over freshly laid bituminous layer by using close graded premix surfacing material type B at locations to control speed and marked with 100mm wide white strips of thermoplastic road marking paint. The close graded premix surfacing material type B shall conform to technical clause 512 and thermoplastic road marking paint shall conform to technical clause 803 to MORT&H specifications

Road Structure Work:-

Construction of 1.5 feet Hume pipe culvert (32 feet formation width) with all respect

Construction of Side Drain 1'x1' Complete in all respect

Construction of 6.5' high Retaining Wall complete in all respect.

Kilo Meter Stone( Ordinary on Vill. Roads) Providing & fixing of Reinforced cement concrete M-15 grade ordinary kilometre stone of standard design for village roads as per IRC 8-1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications

Village Board Providing & fixing of Reinforced cement concrete M-15 grade village board of standard design fixing in position including painting and printing etc. complete as per PWD/MORT&H specifications

Boundary Piller (on Village Roads) Providing & fixing of Reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC 25-1967 fixing in position including painting and printing etc. complete as per technical clause 806 of MORT&H specifications

Providing and Fixing of Cautionary Sign Board 600mmx600mmx600mm Triangular as per IRC 67-2012 with high intensity microprismatic grade Retro Reflective sheeting type-XI as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 3mm thick aluminium composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy reiverts. @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a mild steel angle iron post 65x65x6mm including cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORT&H specifications. A 10 years per-qualification warranty as per clause 6.9 of IRC 67-2012 for Type XI Retro reflective sheeting from the manufacture & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted

Providing and Fixing of Place Identification Sign Board 900x600mm Rectangular Place Identification Sign Board 900x600mm Rectangular as per IRC 67-2012 with high intensity microprismatic grade Retro Reflective sheeting type-XI as per ASTM D 4956-09 and as per IRC 67-2012 fixed over 4mm thick aluminium composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy reiverts. @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a mild steel angle iron post 65x65x6mm without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. A 10 years per-qualification warranty as per clause 6.9 of IRC 67-2012 for Type XI Retro reflective sheeting from the manufacture & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted.

Road Marking with thermoplastic compound 10cm wide edge line on Curve & Junction only (and Zebra Crossing at Education Institutions, Hospitals, etc)

Road Marking with thermoplastic compound 10 cm Centre line for 18' wide road only.

Videography of Proposed/Execute site of work of Link Roads before & after completion of work two times (stilling & video Job Work)

(-) D/d Credit of old useful serviceable materials like Brick Bats & Bricks which obtained from Dismantling of existing brick edging:-

(i) Brick Bat

(ii) Bricks

Add extra cost of Cutlural Cess @ 1% on Total cost as items mentioned above on 1 to 24.2 i.e. Rs 39596837.92