Public Works Department Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Jan 2025
Closing Soon7 Feb 2025
Tender Amount₹ 63,52,741
Costs
EMD
₹ 1,27,054Document Cost
₹ 5,000Tender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEPW_133473_1Tender No
Bid No. 10 Dated 02-01-2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
5.44
191
1043.07
... More
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.
3.63
5220
18949.94
... More
Reinforced cement concrete M-20 mechanically mixed using Volumetric type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
0.1
6158
615.86
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
0.84
221
185.84
... More
Reinforced cement concrete M-20 mechanically mixed using Volumetric type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
0.38
6947
2640.11
... More
Centering and shuttering for sides and soffits of beam , beams, launching girders, bressumers, lintels.
1.04
400
416.34
... More
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
2.06
560
1154.55
... More
Cold twisted deformed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete.
0.38
7876
2993.23
... More
First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.
28.07
5365
150616.6
... More
12.5 mm thick cement plaster 1:5.
190.7
197
37718.55
... More
20mm thick cement plaster 1:5 in two coat work
54.15
270
14668.15
... More
Scraping White wash and colour wash
544.49
7
4012.89
... More
Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete
789.34
64
50722.99
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed.
789.34
52
41582.43
... More
Painting two coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint with ordinary paint.
66.82
67
4505
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers incluidng ramming, watering and consolidated lead upto 30 metres. Labour Rate Only
2.18
66
144.69
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers incluidng ramming, watering and consolidated lead upto 1000 metres.
18.02
389
7013.56
... More
Cement Concrete 1:6:12 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type.
10.7
4299
46009.14
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm
42.12
1507
63503.48
... More
Precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base for floors, treads of steps and landings.
12.73
840
10703.64
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS :1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing /paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In Charge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats
1542.41
370
571971.9
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS :1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing /paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In Charge. (Glazing and paneling to be paid for separately) : For shutters of doors, windows ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
202.03
387
78325.01
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on one side.
1085.38
1007
1093140.47
... More
Providing and fixing mineral fibre false ceiling tiles ( NRC 0.55 to 0.6) at all heights of size 595X595x16 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
368.31
1770
652251.23
... More
Supplying and fixing of Japani sheet frames (Chowkat) consisting of18 gauge (1.25mm) thicksteel sheet of the specified section (standard design latest), including iron lugs (hold fasts) ironhinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. Doors and windows frame of size 118mm x 60mm with 40mm wide single rebateweighing 3.43 kg per meter.
36.05
791
28529.61
... More
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202 - 1 (1999) Commercial with elm or gurjan facing on both Sides with laminated core and lipped edges 35 mm thick
11.06
2430
26880.45
... More
Wire gauge Hollock wood door shutter without springs housed in chowkhat. (35 mm thick)
1.74
2111
3673.51
... More
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)For shutter area above 0.50 sqm.
12.8
116
1496.83
... More
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
28.8
45
1304.64
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
28.8
29
849.6
... More
Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade with ordinary quality paint.
28.8
69
2002.46
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete.
18
361
6504.3
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete. I.S.I Designation No. III (size of door 851mm to 1000mm)
11
1380
15180.99
... More
Providing & fixing 9" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
21
153
3230.01
... More
Providing & fixing 6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in charge.
21
250
5265.33
... More
Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span
2.87
9631
27642.98
... More
Corrugated G.I. Sheet roofing 0.80 mm thick fixed with galvanized iron J or L hooks 10mm dia, G.I. Limpot and bitumen washers complete excluding the cost of purling rafters and trusses
27.88
1169
32602.59
... More
Providing and fixing curtain rail 1.90cm chrome-plated with end bracket. Including sockets and brackets
33.08
317
10489.67
... More
Providing and fixing steel rings chrome plated 3.80cm. dia. For curtains.
760
6
4803.2
... More
Providing and fixing curtain complete in all respect. Size 8x9
28
350
9800
... More
Providing and fixing curtain complete in all respect. Size 7x3
6
325
1950
... More
Credit of old Materials Bricks
967
4
-4167.77
... More
Credit of old Materials Brick Bats
2.01
497
-1000.54
... More
Disposal of Malba Outside the Premises loading / unloading including all leads as desired by engineer in charge
6.04
186
1124.71
... More
ELECTRICAL
-
-
-
... More
POINT WIRING:
-
-
-
... More
SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring fan point (Without fan box)
20
1114
22281.6
... More
Wiring light point
60
711
42666.6
... More
Wiring call-bell point
9
741
6672.6
... More
Wiring 6Amp. wall socket point
18
617
11116.98
... More
Wiring 6Amp. Plug control comprising wall socket point
20
395
7901.2
... More
Wiring 16/20Amp. power plug control point
12
501
6020.76
... More
SURFACE AIR CONDITIONER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):Supply and erection of air conditioner supply terminal point on surface on wall etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2 Module), covered with Frame Plate etc., & including the cost of above material and other petty material with necessary connections etc.:-
-
-
-
... More
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
10
755
7558.9
... More
SURFACE COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):Wiring Computer supply terminal points on surface on wall etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate, covered with Frame Plate etc., & including the cost of above material and other petty material with necessary connections etc.:-
-
-
-
... More
Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. universal Socket (shuttered), 2Nos. 16/20Amp. switch with indicator and 2Nos. blanking plate (Modular accessories).
15
1031
15466.65
... More
COPPER WIRES & CONDUIT PIPE:
-
-
-
... More
PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
Overall size 1.5sq.mm (Un-sheathed)
1100
24
27115
... More
Overall size 2.5sq.mm (Un-sheathed)
800
36
29584
... More
Overall size 4sq.mm (Un-sheathed)
660
53
35250.6
... More
Overall size 16sq.mm (Un-sheathed)
30
187
5628.9
... More
Overall size 25sq.mm (Un-sheathed)
30
295
8874.6
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)
555
57
31923.6
... More
Heavy Gauge PVC Conduit Pipe 32mm dia.(On Surface)
60
87
5221.2
... More
Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
-
-
-
... More
PVC flexible pipe 40mm dia.
20
34
695.4
... More
Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe complete with as required:-
-
-
-
... More
PVC compression Socket gland 40mm dia.
40
32
1306.4
... More
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
... More
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan.
20
131
2633.8
... More
MCB'S & MCB DISTRIBUTION BOARDS:
-
-
-
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
... More
TP&N Vertical Double Door Distribution Board 8 way each.
6
8518
51109.38
... More
MAIN VERTICAL DISTRIBUTION BOARDS:
-
-
-
... More
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
-
-
-
... More
TP&N Double Door Vertical DB's 4 way each (With provision of FP MCCB upto 125amp.)
4
7638
30554.68
... More
Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-
-
-
-
... More
Cable End Box for TPN 8 Way
6
1373
8241.96
... More
Cable End Box for TPN Vertical 4/8/12Way
4
1802
7209.32
... More
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Single Pole 6-32amp. (10kA, Curve-C)
144
190
27443.52
... More
MCB Triple Pole 50, 63amp. (10kA, Curve-C)
16
1325
21208.16
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
6
1750
10504.56
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
... More
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
2
6626
13253.46
... More
MCCB Four Pole 125amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
2
8224
16448.08
... More
EARTHING SYSTEM (INDOOR):
-
-
-
... More
COPPER EARTHING :- Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
4
11144
44577.36
... More
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
... More
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)
40
343
13746
... More
COPPER EARTHING :-
(Upto 14 metre in Length):-Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
2
18663
37326.76
... More
COPPER EARTHING STRIP (As Additional Length):
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
-
-
-
... More
Additional Length 20mm x 3mm thick Copper Tape .
20
517
10353.8
... More
INDOOR LT CABLES, CABLE TRAY & DWC PIPE:
-
-
-
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
... More
Overall size 35sq.mm (3½ Core) Un-armoured (Loose)
250
204
51030
... More
Overall size 50sq.mm (3½ Core) Un-armoured (Loose)
250
266
66502.5
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
... More
Double walled corrugated (DWC) HDPE pipe 63/51 mm (outer/ inner dia.)
450
155
70164
... More
REPAIR OF EXISTING INDOOR LT PANELS:
-
-
-
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc.
-
-
-
... More
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
2
7744
15489.4
... More
MCCB Four Pole 250 amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
2
15375
30751.66
... More
LED'S FIXTURES & FANS:
-
-
-
... More
Supply and erection of LED batten 40 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
8
1095
8760
... More
Supply and erection of Recessed mounted 36watt LED panel (including LED driver) with CRCA sheet having efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
49
3796
186004
... More
Supply and erection of BEE 3-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 210 CMM (approx.). The rated speed of the the product must be minimum of 300 revolutions per minute and 5Nos. of speeds. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.
20
3556
71120
... More
Supply and erection of Heavy duty Exhaust Fan 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
3
4890
14670
... More
Providing Networking System along with allied accessories:
-
-
-
... More
Supply, Installation and Comissioning ofDistribution Switch 24 port L2 Switch with 4 Uplink 10G ports 2 copper and 2 Fiber Physical Specifications 24 # 10/100/1000 Base-T auto-sensing ports, 02 # 100/1000/10GBASE-T RJ45 Ports, 02 # 1000/10GBASE-X SFP+ ports, 1 RPS Connector, 1 USB Storage (image, config,log files), CPU/Memory CPU: 800 MHz, RAM: 512 MB, Packet buffer memory: 32 MB, Flash: 128 MB, Performance Specification , Stack height: 6 switches, Bandwidth: 128 Gbps non-blocking, Throughput : 95.2 Mpps, Acoustic noise (ANSI-S10.12): 40dBA, Mean Time Between Failures (MTBF): 278,559 hours, MAC Address database size: 16,000 media access control (MAC) addresses, 32 Static Routes, 8K DHCP snooping bindings, 512 ARP Cache entries, 8K DHCP snooping bindings, 100 shared for MAC, IP and IPv6 ACLs, Jumbo frame: 9K, IEEE Network Protocols , IEEE 802.3i 10BASE-T , IEEE 802.1Q VLAN Tagging, IEEE 802.1Qav1 , IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX, IEEE 802.3ae 10-Gigabit Ethernet Over Fiber (10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-LX4) , IEEE 802.3ad Trunking (LACP), IEEE 802.3an 10GBASE-T 10 Gbit/s Ethernet Over Copper Twisted, IEEE 802.1D Spanning Tree (STP), IEEE 802.1s Multiple Spanning Tree (MSTP) , IEEE 802.1w Rapid Spanning Tree (RSTP), IEEE 802.1x RADIUS Network Access Control, Power Consumption , When all ports used, Line-Rate Traffic: 28.18W Network Security and Traffic , Guest VLAN, Access Control Lists (ACLs) L2 / L3 / L4, Broadcast, Unicast, Multicast Protection, IP-based ACLs (IPv4 and IPv6), MAC-based ACL MAC lockdown by the number of MACs, IEEE 802.1x Radius Port Access Authentication Port Security, QUALITY OF SERVICE (QOS) Access Lists, L2 MAC, L3 IP and L4 port ACLs, Port-based rate limiting : Egress only, Port-based QoS, approved makes cisco juniper netgear alcatel should support for IPv6 fields, DiffServ QoS, DiffServ QoS, IEEE 802.1p COS, Destination MAC and IP, WRR (Weighted Round Robin), Strict priority queue technology, Audio Video Bridging Systems (IEEE 802.1BA), L2 SERVICES – VLANS IEEE 802.1Q VLAN tagging, Auto-Voice VLAN : Based on phones OUI bytes (internal database, or user-maintained) or protocols (SIP, H323 and SCCP), L2 SERVICES – AVAILABILITY , IEEE 802.3ad – LAGs , Broadcast storm control, IEEE 802.1w Rapid Spanning Tree Protocol, BPDU guard,L2 SERVICES - MULTICAST FILTERING , IGMP snooping (v1, v2 and v3), MLD snooping support (v1 and v2) Multicast VLAN Registration (MVR), L3 SERVICES – DHCP , DHCP Client, DHCP Snooping, DHCP relay, L3 SERVICES - IPV4 ROUTING, Host ARP table, Router Discovery(IRDP), Static routing, STACKING Stacking Interface : 10G SFP+ or 10GBASE-T copper (both at 10G speeds only), Max. number of switches within a stack : up to 6, Stacking bandwidth : 40G bi-directional, 802.1ab LLDP, Password management, Admin access control via Radius and TACACS+, Web-based graphical user interface (GUI), Smart Control Center (SCC) for multiswitch management , IPv6 management, Dual Soft ware (fi rmware) image, Port Mirroring, Dual Confi guration fi le, SNTP client over UDP port 123, Many to One Port Mirroring, SSL/HTTPS and TLS v1.0 for web-based access , Syslog (RFC 3164), USB port for firmware and config upload/download, Operating Temperature: 32° to 122°F (0° to 50°C) , Altitude: 10,000 ft (3,000 m) maximum, Storage Temperature: – 4° to 158°F (–20° to 70°C), Humidity: 95% maximum. complete in all respect as per satisfaction of the Engineer in charge of the work.
2
115195
230390
... More
Supply, Installation and Comissioning of CAT 6 Cable should be Unshielded twisted pair cabling system, TIA / EIA 568-C.2 Category 6 Cabling system.Conductors should be 23 AWG solid bare copper.Netowork support should be ultrahigh speed data networks such as Gigabit Ethernet (1000 Base-T and 1000 Base-TX) and beyond.Cable Should be ETL/UL Certificates are mandatory.Frequency tested up to should be 600 MHz minimum.Impedance should be 100 Ohms + / - 15 ohms.Box Packing shoud be 305M.Should be 25-year systems warranty; Warranty to cover Bandwidth of the specified and installed cabling system, and the installation costs. Site certificate Should be issued by OEM.Should be RoHS compliant. (To ensure only principal networking companies participate having strong Product , Support and Service.) complete in all respect as per satisfaction of the Engineer in charge of the work.
2200
50
110000
... More
Supply, Installation and Comissioning of Patch Panel Cat 6A UTP Keystone Type- 24 Port-Fully Loaded Category 6A UTP Patch Panel should be 24 Port 1U Size. , Mounts in standard 19 inch racks. , Patch panel should have cable manager for improvement management. , Patch panel should be made from SPCC and 1. 5mm or higher thickness with black colour painted. , RJ-45 Jack housing should be PBT + glass fiber, UL-94V-0. , RJ-45 Jack contact material should be phosphor bronze with nickel plated, RJ-45 Jack shield material should be phosphor bronze with tin plated. complete in all respect as per satisfaction of the Engineer in charge of the work.
3
7011
21033
... More
Supply, Installation and Comissioning of Patch Cord 1 Mtr Patch cord Should be 4 Pairs 24 AWG copper cables.The Outer Jacket should be Low Smoke Zero Halogen.24 AWG stranded bare copper.Operating temperature range should be -20°C to 60°C.Should minimum comply with proposed ANSI/TIA/EIA-568-C.2.Should be verified by ETL (ETL certificate to be enclosed with the Bid)UL listed (UL certificate to be provided along with the Bid)Should Have cross separator.Standard length should be available 0.5M to 10M.Should be RoHS compliant. . complete in all respect as per satisfaction of the Engineer in charge of the work.
36
157
5652
... More
Supply, Installation and Comissioning of Patch Cord 2 Mtr. Patch cord Should be 4 Pairs 24 AWG copper cables.The Outer Jacket should be Low Smoke Zero Halogen.24 AWG stranded bare copper.Operating temperature range should be -20°C to 60°C.Should minimum comply with proposed ANSI/TIA/EIA-568-C.2.Should be verified by ETL (ETL certificate to be enclosed with the Bid)UL listed (UL certificate to be provided along with the Bid)Should Have cross separator.Standard length should be available 0.5M to 10M.Should be RoHS compliant.. complete in all respect as per satisfaction of the Engineer in charge of the work.
36
179
6444
... More
Supply, erection, testing & commissioning of Wall Mount 9U Rack ,Front Glass Door (tinted,Toughened) with Lock & Key,2 pairs of 19" Mounting Rails with U-Marking,Welded Side Walls With Metal Logo,1U Cable Manager (1), Hardware Packet (1 Pkt),6 Socket 5 Amp. Power Distribution Unit (1 No),Roof Mounted Fan Unit / 90 CFM /230V AC (1 No) complete in all respects as approved and desired by the Engineer in-charge at site.
2
6711
13422
... More
Supply, Installation and Comissioning of 1KVA UPS with Input power factor - 0.99, Output power factor - 0.8, OVCD inbuilt , DC V 36v, Efficiency : Above 90% complete in all respect as per satisfaction of the Engineer in charge of the work.
2
11706
23412
... More
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring Networking socket point RJ45 (one module)
36
461
16611.48
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)
720
57
41414.4
... More
Providing PA System:
-
-
-
... More
Supply, installation, testing & Commissioning of Mic Single zone desktop paging microphone with a sturdy, aluminium die-cast top and special high reliability switches with integrated LED indicators. Fitted with a flexible 300mm (12”) gooseneck and a high quality unidirectional dynamic cartridge. Supplied with 6 mtrs. twin core shielded low noise cable with 6.3mm (¼”) phone plug. Frequency response 50-10000 Hz, Senstivity 2.0mV/Pa, Impedance 600 ohm complete in all respects as approved and desired by the Engineer in-charge at site.
3
4889
14667
... More
Supply,installation, testing & Commissioning of 500W Power mixer amplifier POWER OUTPUT 750W Max., 500W RMS at 10% THD, 450W RMS at 5% THD, 415W RMS at 2% THD, OUTPUT REGULATION ≤ 2 dB, no load to full load at 1kHz, INPUT CHANNELS 7 × Mic 0.8mV/4.7kΩ, 2 × Aux 100mV/470 kΩ, 1 × CD 200mV/50 kΩ, 1 × Line 1V/50kΩ, FREQUENCY RESPONSE 50-15,000Hz ±3dB, SIGNAL TO NOISE RATIO 60dB , TONE CONTROLS Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz, OUTPUT Preamp 200mV/600Ω, Line 1V/1kΩ, SPEAKER OUTPUT 4Ω, 8Ω, 70V & 100V, DIGITAL PLAYER MP3 Player with USB, SD and MMC Card Reader, Bluetooth, POWER SUPPLY AC: 220-240V 50/60Hz, DC: 36V (3×12V Car Battery), POWER CONSUMPTION AC: 1000VA DC: 8A, complete in all respects as approved and desired by the Engineer in-charge at site.
3
53248
159744
... More
Supply, installation, testing & Commissioning of 20 Watt Full range Array of wall speakers radiate forward sound beam for wider audience coverage Mounting clamps & hardware supplied Slim, compact, aesthetically designed column speaker to integrate with most interiors.Aluminium extruded cabinet with moulded plastic covers, metal mesh grille. 100V line matching transformer with rotary switch for power tap selection. Input Power 20W RMS, 30W Max. Power Taps 20/15/10/5W Voltage 100V Frequency Response 150-15,000Hz SPL at 1kHz 93dB/1W/1m Speakers.complete in all respects as approved and desired by the Engineer in-charge at site.
6
5278
31668
... More
PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
Overall size 1.5sq.mm (48/0.20mm), 2Core
300
47
14379
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)
100
57
5752
... More
Providing Display System For Public and Lawyers
-
-
-
... More
Supply & erection of 32” LED Commercial Panel with 2 HDMI Port, VGA Input, 3 Years Warranty, complete in all respect as desired by the engineer in charge at site.(2 Nos. for Each Court)
6
29155
174930
... More
PUBLIC HEALTH
-
-
-
... More
Tiles and Flooring
-
-
-
... More
Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
-
-
-
... More
Ground Floor
10.4
113
1183.31
... More
1st Floor
5.2
113
591.66
... More
Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by manual means
-
-
-
... More
Ground Floor
1.2
3176
3811.56
... More
1st Floor
0.6
3176
1905.78
... More
Cement concrete 1:2:4 With Stone ballast or shingle mixing by manual means
-
-
-
... More
Ground Floor
1.2
4801
5762.22
... More
1st Floor
0.6
4801
2881.11
... More
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with@ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,completewhite cement slurry in joints including corners angles and beading.
-
-
-
... More
Ground Floor
6.38
707
4516.72
... More
1st Floor
3.19
707
2258.36
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
-
-
-
... More
Ground Floor
27.86
837
23333.59
... More
1st Floor
13.93
837
11666.79
... More
Sewerage System (Ground Floor)
-
-
-
... More
Excavation manually in trenches with straight or open cutting in a built up street/ lanes having wall to wall width upto 3 metres for sewers and manholes to full depth as shown in drawings including shoring, dressing to correct sections and dewatering of rain water, provision for diversion for traffic, protection of existing services le. telephone cables, electric, lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, fixing and maintenance of caution boards, fencing, refilling trenches, watering, dressing and restoration of surface to original level and removal of surplus spoils from the site of work upto 15 metre, for all works other than connections to complete in all trenches.
A) For depth not exceeding 2 m below Ground level
i) All classes of soil except rocky
12.5
235
2949.75
... More
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
-
-
-
... More
110 mm o/d pipes (for External sewar pipe )
50
599
29961.5
... More
Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge)including cutting, jointing, wastage, but excluding cost of lead jointing. Type B
-
-
-
... More
110 mm o/d SWR UPVC pipe line laid complete
15
396
5942.4
... More
90 mm o/d SWR UPVC pipe line laid complete
16
344
5515.04
... More
Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
... More
For 110 mm o/d pipes
-
-
-
... More
Single Tee With Door
4
236
945.28
... More
Door Elbow 90 Degree (All side socketed)
8
198
1584.72
... More
Bend Plain
4
162
650.28
... More
Collar
6
111
666.54
... More
P Trap/Floor Trap 110mm x 110mm
4
338
1353.52
... More
Vent cowl
2
45
90.8
... More
Nahani trap without jali 110mmx90mm
4
172
689.72
... More
For 90 mm o/d pipes
-
-
-
... More
Single Tee With Door
4
216
867.2
... More
Door Elbow 90 Degree (All side socketed)
2
143
287.88
... More
Vent cowl
2
37
75.26
... More
Bend Plain
2
143
287.88
... More
Collar
4
109
437.32
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
... More
600mm x 900mm inside with 455mm x 455mm cover and frame light duty double seal
1
8970
8970.55
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
... More
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
2
1930
3860.02
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:2 (1 cement : 2 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete.
-
-
-
... More
For pipes 100 to 250 mm Diametre
3
353
1061.94
... More
Sewerage System (First Floor)
-
-
-
... More
Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge) including cutting, jointing, wastage, but excluding cost of lead jointing. Type B
-
-
-
... More
110 mm o/d SWR UPVC pipe line laid complete
11
396
4357.76
... More
90 mm o/d SWR UPVC pipe line laid complete
9
344
3102.21
... More
Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
... More
For 110 mm o/d pipes
-
-
-
... More
Single Tee With Door
2
236
472.64
... More
Door Elbow 90 Degree (All side
socketed)
4
198
792.36
... More
Bend Plain
2
162
325.14
... More
Collar
4
111
444.36
... More
P Trap/Floor Trap 110mm x 110mm
2
338
676.76
... More
Vent cowl
2
45
90.8
... More
Nahani trap without jali 110mmx90mm
2
172
344.86
... More
For 90 mm o/d pipes
-
-
-
... More
Single Tee With Door
2
216
433.6
... More
Door Elbow 90 Degree (All side socketed)
4
143
575.76
... More
Vent cowl
2
37
75.26
... More
Bend Plain
2
143
287.88
... More
Collar
2
109
218.66
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge )
-
-
-
... More
110mm o/d
10
101
1012.7
... More
Water Supply System(G.F)
-
-
-
... More
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
... More
CPVC SDR 11 Pipe & fitting 25mm o/d
36
301
10837.44
... More
CPVC SDR 11 Pipe & fitting 20mm o/d
20
233
4663.8
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.
-
-
-
... More
Size 75 mm x 75 mm
50
72
3634.5
... More
Providing, fixing and jointing ISI Marked GunMetal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
C) 25mm i/d Gun Metal peet valve heavy pattern
3
814
2442.93
... More
Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
... More
Through wall 11.43 cm thick
2
176
352.84
... More
Through wall 22.86 cm thick
2
251
503.42
... More
Providing & Fixing CPVC Union Complete in all respect.
3
125
375
... More
Internal Water Supply System(F.F)
-
-
-
... More
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
... More
CPVC SDR 11 Pipe & fitting 25mm o/d
37
301
11138.48
... More
CPVC SDR 11 Pipe & fitting 20mm o/d
10
233
2331.9
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.
-
-
-
... More
Size 75 mm x 75 mm
25
72
1817.25
... More
Providing, fixing and jointing ISI Marked GunMetal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
C) 25mm i/d Gun Metal peet valve heavy pattern
3
814
2442.93
... More
Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
... More
Through wall 11.43 cm thick
6
176
1058.52
... More
Through wall 22.86 cm thick
8
251
2013.68
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
-
-
-
... More
Triple Layer Tanks 500x2
1000
11
11380
... More
Triple Layer Tanks 500x1
500
11
5690
... More
Providing and fixing in position CPVC Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. 25mm
6
100
600
... More
Providing and fixing in position automatic brass Ball Cock in tanks. A) Plastic Ball Cock with rod and Plastic Ball
-
-
-
... More
25mm i/d
2
704
1409.86
... More
Providing & Fixing CPVC Union Complete in all respect.
3
125
375
... More
Making foundation for PVC Water Tank 1000 Ltrs complete
2
2500
5000
... More
Sanitary Installation (GF)
-
-
-
... More
Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
-
-
-
... More
Chinaware Floor Mounted One Piece EWC rim less type with
matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) size 69x36x74 cm with P trap or S trap and seat cover complete in all respect.
2
17403
34807.64
... More
Providing and fixing PVC accessory fittings for dual flush
Chinaware flushing cistern 10 Litres capacity complete.
2
1723
3447.06
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect - b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
12
191
2300.88
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
... More
Size 550 mm x 400 mm x 815 mm
2
3807
7614.7
... More
Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
-
-
-
... More
Vitreous chinaware standard white pedestal for wash hand basin.
2
2117
4235.08
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm,C.P brass screws and washers complete in all respect c) Size 1500mmx600mm or any other size
2
2915
5830.06
... More
Providing and fixing in position towel rails /ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
a) C.P. brass towel Rails size 15mm dia 610mm long
2
1621
3242.68
... More
b) C.P brass towel ring
2
959
1919.48
... More
Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all
respect.
a) C.P. brass liquid soap container
2
1954
3908.48
... More
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
20
66
1327.4
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 10 mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect
-
-
-
... More
C.P. Brass extension piece, 25mm long to 50mm long
20
112
2254.4
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
4
87
349.76
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect
-
-
-
... More
C.P. brass Bib cock foam flow without flange
4
966
3864.24
... More
Providing & Fixing in postion stop cock/ Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
C.P.brass 15mm stop cock Male and female end
4
845
3383.84
... More
C.P.brass 15mm Angle valve without flange
8
870
6961.52
... More
Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.
a) C.P. brass toilet paper holder
2
1141
2283.98
... More
Providing and fixing Stainless steel health faucet complete in all respect.
2
1199
2399.88
... More
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
2
119
238.1
... More
Sanitary Installation (First Floor)
-
-
-
... More
Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
-
-
-
... More
Chinaware Floor Mounted One Piece EWC rim less type with
matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) size 69x36x74 cm with P trap or S trap and seat cover complete in all respect.
1
17403
17403.82
... More
Providing and fixing PVC accessory fittings for dual flush
Chinaware flushing cistern 10 Litres capacity complete.
1
1723
1723.53
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect - b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
6
191
1150.44
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
... More
Size 550 mm x 400 mm x 815 mm
1
3807
3807.35
... More
Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
-
-
-
... More
Vitreous chinaware standard white pedestal for wash hand basin.
1
2117
2117.54
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm,C.P brass screws and washers complete in all respect c) Size 1500mmx600mm or any other size
1
2915
2915.03
... More
Providing and fixing in position towel rails /ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
a) C.P. brass towel Rails size 15mm dia 610mm long
1
1621
1621.34
... More
b) C.P brass towel ring
1
959
959.74
... More
Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all
respect.
a) C.P. brass liquid soap container
1
1954
1954.24
... More
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
10
66
663.7
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 10 mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect
-
-
-
... More
C.P. Brass extension piece, 25mm long to 50mm long
10
112
1127.2
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
2
87
174.88
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect
-
-
-
... More
C.P. brass Bib cock foam flow without flange
2
966
1932.12
... More
Providing & Fixing in postion stop cock/ Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
C.P.brass 15mm stop cock Male and female end
2
845
1691.92
... More
C.P.brass 15mm Angle valve without flange
4
870
3480.76
... More
Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.
a) C.P. brass toilet paper holder
1
1141
1141.99
... More
Providing and fixing Stainless steel health faucet complete in all respect.
1
1199
1199.94
... More
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
1
119
119.05
... More
Air Conditioner & Water Cooler (GROUND & FIRST FLOOR)
-
-
-
... More
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
... More
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer
3
37590
112772.97
... More
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
3
13369
40109.91
... More
Providing & Installing & Erection split type wall mounted air conditioner capacity 1.5 tonne 4 Star Make:- Carrier, Hitachi, Voltas, Blue Star, Daikin or equilant with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
4
51846
207384
... More
Providing & Installing & Erection split type wall mounted air conditioner capacity 2.0 tonne 4 Star Make: Carrier, Hitachi, Voltas, Blue Star, Daikin or equilant with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
11
60600
666600
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%