Public Works Department Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 4,15,470Document Cost
₹ 20,000Tender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CEPW_130111_1Tender No
29 dated 20.11.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Cement concrete 1:4:8 with brick balast 40mm gauge mixing by mechanical means using concrete mixer volumetric type
50.99
4675
238378.25
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
45.48
6050
275182.65
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
125.27
6840
856942.01
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
364.3
221
80595.91
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
58.01
5585
324013.11
Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
153.99
6331
975053.9
Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
23.33
7123
166182.16
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
699
560
391761.54
Centering and shuttering for columns (Square or rectangular or poly gonal in plain)
291.93
502
146700.66
Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
340.05
400
136132.22
Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded
30.62
348
10677.5
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
55.52
5729
318118.5
Extra rate for First floor
5.94
153
913.63
115 mm thick brick wall with every fourthcourse reinforced with hoop iron laid in 1:4 cement mortar in superstructure
149.78
732
109666.29
Dressed or moulded three brick cornice laid in cement sand mortar 1:4 including 12.5mm thick cement plaster 1:4 or pointing as required
54.38
273
14895.23
12.5 mm thick cement plaster 1:5 (Inside Plaster)
288.36
191
55313.22
Extra rate for First floor
35.97
2
75.9
20mm thick cement plaster 1:5 in two coat work
288.36
261
75362.89
12.5 mm thick cement plaster 1:4 (Outer Plaster)
139.23
200
27880.81
Extra rate for First floor
52.3
2
110.35
20mm thick cement plaster 1:4 in two coat work
139.23
275
38295.21
Extra rate for smooth exposed concrete finish is desired and plaster is not to be done 10 percent extra on the labour rates shall be payable.
464.06
53
24687.99
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.
464.06
297
137867.59
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4.0 kgf / cm²) conforming to IS : 4985, including fixing with M.S. clamps U-PVC pipes (working pressure 4.0 kgf. / sqcm) Pipe 110 mm dia.
19.21
265
5099.87
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
8
142
1137.76
Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
5
88
442.45
Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16
5
100
500.4
Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3
5
713
3566.1
Providing and fixing in position gratings 150mm x 150mm for gully trap. H.C.I. grating including painting with black bitumastic superior paint of approvedmanufacture three coats.
5
101
507.6
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
578.01
335
194072.64
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
554.45
333
184870.26
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top ofR.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
502.41
758
381088.03
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
287.35
68
19677.73
Earth filling under floors complete in all respect.
28.9
381
-11029.97
Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation & taken only from outside the building plinth in 15 cm layers including ramming watering and consolidation lead upto 30 metres
170.31
119
20275.41
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
506.92
424
215217.96
Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
179.59
1155
207550.37
Marble stone flooring (Baroda Green) with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Udaipur Green Marble Tiles of thickness 18mm to 20mm Slabs sizes above 0.50 sqm
37.7
1253
47263.17
Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing
12.88
1406
18114.69
Extra labour for projected nosing of stair case of any shape and design.
51.52
67
3473.48
Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness and colouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects.
138.61
130
18106.62
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm
254.13
1497
380437.69
Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm.
254.13
130
33197
Supply & Fixing of door frames (chowkhats) consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (base steel as per I:513) with zinc of 120gm/sqm & upto 50 micrones (as per approved colour), 3 Nos 100mm but hinges 2mm thick, 6 nos 1.2mm thic CRCA electroplated stiffner, 6 nox M.S hold fast with split and tail welded to stiffner plate 200mm long, Receiver for aldrop, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.60 mm of approved shade, fixed in position, including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire stasfication of Engineer-in-Charge., Doors frame of size 80mm x50mm with 37 mm wide single rebate for 35mm door shutter
10.52
1192
12545.73
Supply & Fixing of door frames (chowkhats) consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (base steel as per I:513) with zinc of 120gm/sqm & upto 50 micrones (as per approved colour), 3 Nos 100mm but hinges 2mm thick, 6 nos 1.2mm thic CRCA electroplated stiffner, 6 nox M.S hold fast with split and tail welded to stiffner plate 200mm long, Receiver for aldrop, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.60 mm of approved shade, fixed in position, including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire stasfication of Engineer-in-Charge. Doors frame of size 125mm x60mm with 37 mm wide Double rebate for 35mm door shutter
38.87
1566
60891.8
Supply & Fixing of Window frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS : 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12-16 micrones thickness under coat of EPOXY prime & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position by means of PVC & metal hold fastner with PVC cap complete in all respects as per drawing, design, specification & entire stasfication of Engineer-in-Charge. Window outer frame of size 72mm x 55mm and central mullion 72mm x 50mm with Double rebate.
76.22
1097
83670.51
Supply & Fixing of Window shutter consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS :513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5.7 micrones total thickness of coating 0.58mm of approved shade, fixed in position fixed in position by means of screws, complete in all respects as per drawing, design, specification & entire stasfication of Engineer-in-Charge., Glazed Windows shutter Section 47mm x 20mm (Without Glass)
11.29
5600
63228.63
Wire Mesh Windows shutter Section 40mm x 20mm with S.S wire mesh 32 guage flymesh with 144 holes per square inch.
11.29
5692
64263.36
Providing & Fixing fixed beeding 12mm x 12mm for fixed glass with ECO fixed gasket (EPDM)
37.04
252
9365.19
Providing and fixing glazing in door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of Gasket/beating shall be paid as per respective item), Float glass panes of 5.5 mm thickness
25.33
816
20681
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
16.62
9628
159997.71
Providing Polyester Powder coating 60 to 70 micron any coloured specified to M.S Grill section of various sizes including carriage of material from market to workshop & workshop to site of work.
1661.63
27
45511.91
Wire gauge Hollock wood door shutter without springs housed in chowkhat. 35 mm thick
9.72
2111
20520.96
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999)) Commercial with elm or gurjan facing on both Sides with laminated core and lipped edges:- 35mm thick
11.61
2430
28217.18
Providing and fixing ply wood, plain lining, butt jointed including PVC Plug placed at45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra) 4mm thick 3 ply decorative ply wood with teak faced on one side
19.45
674
13113.97
Polyurethane polish (PU) two or more coats to give required finish including two coat of wood sealer Including Preparation of surface/base complete as per specification
19.45
1444
28092.61
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
21.33
116
2494.33
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm
5
209
1048.25
Providing & fixing 8" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
5
328
1643.45
Providing & fixing 12" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
5
484
2423.05
Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mmM.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
20.12
501
10089.58
Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 10mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for stiles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture.M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail complete as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
6.51
3810
24806.42
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
356.82
7827
2793101.32
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
855.19
84
72075.41
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
1040.78
22
23022.05
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
1040.78
93
97583.53
Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
278.46
163
45469.73
Providing and fixing mineral fibre false ceiling tiles at height upto 4 Mtr. of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main T. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595x595 mm
26.32
1436
37821.05
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842 - 2000, including top cover of 6 mm coir veneer board, nickel plated MS Pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm MS Flat 10 cm long and rawl plug 50 mm long (designation 10 no) etc., all complete
27.44
578
15870.47
Acoustical Wooden slat wall panel
Providing and Fixing BOLLARD Channeled Woodworks perforated panels G-13/G-21/G-28 of width 192mm, thickness of 15mm and length 2400 mm or as required by the Architect/ approving engineer, made of a MDF board with minimum 595 Kg/M3 density substrate with a laminated facing as per the approved shade & finish (Khaya Mahagony/Fusion Mapple/ Bavarian Beech/ Classic Walnut) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 3mm width with 13mm/21mm/28mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.40 (NRC 0.7 with 25mm GW of 48kg/m3) . The panels shall be mounted on special aluminium splines (keel) using clips provided by manufacturer.
INSTALLATION: Screw the aluminium extruded keel for channelled woodworks provided by manufacturer over the solid wall/ surface an on-centre distance of 600mm. Place the inside clip on the groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Installation to be carried out by Trained Installation team & Installation should be carried out as per manufacturer recommended procedure.
219.98
6965
1532160.7
Wood works False Ceiling
Providing and fixing false ceiling at all heights with wooden finished suspended wood works microlook false ceiling tiles of Size 595x595 mm of approved texture, design and patterns, RD06 perforations having hole diameter as 6mm and open area as 6% with approved MDF laminate (Khaya Mahagony/Fusion Mapple/ Bavarian Beech/ Classic Walnut) finish with back side of the tile will have Acoustical fleece to achieve NRC of 0.4, Humidity Resistance (RH) of 70% in module size of 600mm x 600mm x 15mm and density 650 Kgs/M3. in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
213.57
6500
1388205
Providing and fixing Roller Blinds at the designated locations with fabric/ texture complete as per sample desired by Engineer-in-Charge.
264
265
70092
PH Work
-
-
-
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
2
5035
10071.46
Providing and fixing jet spray with 2'-6" long PVC pipe.
With C.P. Brass nut
2
501
1002.94
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
Size 550 mm x 400 mm x 815 mm
3
3807
11422.05
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
5
119
595.25
INTERNAL - EXPOSED ON WALL : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step PVC solvent cement and testing of pipes complete as per direction of Engineer-in Charge.
-
-
-
SDR 11 CPVC pipes & fittings 16mm o/d
17
160
2736.32
SDR 11 CPVC pipes & fittings 20mm o/d
20
191
3839.4
SDR 11 CPVC pipes & fittings 25mm o/d
30
238
7164.9
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
-
-
-
Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
14
396
5546.24
90mm o/d SWR UPVC pipe lines laid complete
33
344
11374.77
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.
1
6901
6901.48
Providing & Fixing in position plastic moulded frame mirror Size 550mmx400mm with 4mm thick hard board backing of required shape fixed in position with rawl plugs, C.P. brass screws and washers complete in all respect
3
718
2155.47
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect.
-
-
-
Brass Nozel Bib cock 15mm x 250gm.
2
356
712.16
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.
-
-
-
C.P.brass 15mm Concealed stop cock with flange.
2
1268
2536.82
C.P.brass 15mm Angle valve without flange
7
870
6091.33
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut
7
183
1283.17
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.
7
116
816.06
Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete
15
889
13337.25
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
56
736
41238.4
Provising & placing in postion on terrace (at all floor levels) HDPE water storge tanks of approved make (to the approved of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet,outlet and over flo pipes but without fitting and base support for tanks.
-
-
-
Double Layer Tanks (1000 x 4 & 500 x 1)
2000
9
18380
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
-
-
-
20mm i/d G.I. Union
3
158
476.7
Providing, fixing and jointing gun-metal peet valves (Heavy Pattern) with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
-
-
-
20mm
2
592
1185.54
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
C.P brass towel ring
3
959
2879.22
Cutting holes upto 23cm thorugh stone masonary or B.B. in cement walls for pipes, and making good including repainting, replastering and finishing according to existing finish where required.
-
-
-
22.86cm thickness of wall
6
169
1014.54
Providing & Fixing in position automatic brass ball valves in tanks
-
-
-
Brass Ball Cock with rod and Plastic Ball
-
-
-
20mm i/d
1
604
604.87
Providing and fixing in position G.I tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC water storage tank complete in all respect.
-
-
-
G.I tank nipple 20mm i/d
2
124
248.84
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal
4
5123
20492.68
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
3
888
2664.3
Providing and fixing brick masonry platform for storage tank.
1
2500
2500
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
15
424
6368.4
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.
-
-
-
Size 75 mm x 75 mm
50
72
3634.5
Providing and fixing in position paper holders of approved make (to the approval of Engineerin- charge) fixed in to wall with C.P brass screws complete in all respect.
-
-
-
C.P. brass toilet paper holder
2
1141
2283.98
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm o/d pipes
-
-
-
Single Tee
3
206
618.45
Elbow 90 Degree (All side socketed)
3
162
487.71
Vent Cowls
2
45
90.8
For 75mm o/d pipes
-
-
-
P Trap/Floor Trap 75mm x 75mm
2
206
412.3
P&F MTA/FTA
5
150
750
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge) complete in all respect.
2
87
174.88
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge) including carriage complete in all respect.
-
-
-
Water Cooler Full Steel Body 150/150 ltr without Stablizer
1
46849
46849.15
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
1
13369
13369.97
AUTOMATIC VOLTAGE STABLIZER: Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
-
-
-
Automatic Voltage Stablizer 5 KVA
1
6300
6300.98
Cement concrete 1:2:4
-
-
-
with stone ballast or shingle
-
-
-
mixing by manual means
10
4808
48081.7
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
2.5
3453
8633.43
Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure) as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
-
-
-
6 Kg. Capacity
3
2940
8820.9
Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
-
-
-
4.5 Kg. Capacity
4
7150
28600.76
Installation of Air Conditioning System
-
-
-
Providing and installing O-General / Daikin / Carrier / Toshiba/ Mitsubishi make 3-Star rating with EER3.5 Fixed Speed Model (Hi-wall Cooling only without installation kit i.e. Copper Pipe) or any other equivalent make Split type Air Conditioner of 2.0Ton capacity suitable for 230 Volts single phase supply with nature friendly refrigerant R32 or equivelant capable of performing the following functions :- (i) Cooling (ii) Dehumidifying (iii) Air Circulation (iv) Filtering including installation charges.
11
72850
801350
Providing and installing Automatic Voltage Stabilizer copper winding and having suitable range for input and output of 5 KVA capacity of reputed make along with Ampere Meter, Volt Meter & 3 core wire of 1½ metre length complete in all respect make V-Guard, Liv Guard, Luminous and any other equivalent make.
11
4050
44550
Providing & Fixing extra refrigerant copper pipe including cutting chase in walls & making good the same wall complete in all respect
99
360
35640
Providing and fixing 15 mm i/d PVC drain pipe with specials for Split type Air Conditioner complete in all respects.
99
100
9900
Provision of Angle iron stand for placeing out door AC unit.
11
500
5500
Providing and fixing PVC 70/76, 3 Core Electrical Wire for Split type Air Conditioner complete in all respects.
99
180
17820
External Sewerage System
-
-
-
Excavation manually in trenches with straight or open cutting in built up street/ lane having wall to wall width of street/ lane upto 3.0 metre, for intramural sullage drains, extramural intercepting drains and outfall drains, storm water channels and other work contingent or incident thereto, to full dimensions and depth as shown on the drawings or as shall be required by Engineer in-charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic. Providing and fixing and maintenance of caution boards, fencing, night signals, for leads upto 15m and for all lifts and subsequent refilling, watering and dressing upto groung level, including removal of surplus spoil from the site upto 15 metre distance complete in all respects.
-
-
-
All classes of soil except rocky
29.16
180
5253.17
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
-
-
-
110mm o/d pipe
6
599
3595.38
160mm o/d pipe
30
1253
37601.7
Tibb Sand filling under Pipe Lines
9.72
450
4374
Electrical works
-
-
-
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring fan point (with fan box )
15
1210
18153.15
Wiring light point
45
762
34311.15
Wiring call-bell point
1
744
744.03
Wiring 6 Amp. wall socket point
2
618
1237.86
Wiring 6 Amp. Plug control comprising wall socket point
10
371
3713.59
Wiring 16/20 amp. power plug control point
4
478
1912.12
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (NSR Rate)
-
-
-
Supply and Erection of Computer Point with 8 Module Sheet Metal Box and 8 Module Cover Plate with 2 Nos. 6A Switch Modular and 3 Nos. 6A Socket (Two Module) covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface). Complete in all respect as per satisfaction of engineer in charge at site.
3
550
1650
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Supply and Erection of Air Conditioner Point with 32A DP Switch, 2 Module Sheet and 2 Module Cover Plate with 16A Socket covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface). Complete in all respect as per satisfaction of engineer in charge at site.
8
700
5600
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring Telephone socket point RJ11 (one module)
1
355
355.24
Wiring Networking socket point RJ45 (one module)
3
461
1384.29
PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
Overall size 1.5sq.mm (Un-sheathed)
300
24
7395
Overall size 2.5sq.mm (Un-sheathed)
120
36
4437.6
Overall size 4sq.mm (Un-sheathed)
480
53
25636.8
Overall size 10sq.mm (Un-sheathed)
300
120
36156
Overall size 16sq.mm (Un-sheathed)
300
187
56289
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
400
70
28320
Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
200
97
19468
Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
-
-
-
PVC flexible pipe 25mm dia.
10
17
179.1
COPPER EARTHING (Upto 8 metre in Length): Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length)
4
13729
54919.36
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
MCB Single Pole 6-32amp. (10kA, Curve-C)
22
190
4192.76
MCB Double Pole 40amp. (10kA, Curve-C)
1
789
789.33
MCB Four Pole 50, 63amp. (10kA, Curve-C)
1
1750
1750.76
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
SP&N Double Door Distribution Board 12 way each
1
1797
1797.9
TP&N Horizontal Double Door Distribution Board 4 way each
1
2914
2914.93
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
Overall size 35sq.mm (3½ Core) Un-armoured (Loose)
120
204
24493.88
SHEET METAL IRON CLAD CHANGEOVER SWITCHES:
Supply and erection of sheet metal Iron Clad Changeover Switch on existing surface with G.I. bolts & nuts/rag bolts and nuts etc., according to the size of holes in the body of the switch including connections with suitable size of thimbles and bonding to the existing earth as per PWD General Specifications:-
-
-
-
IC Four Pole Changeover Switch 200amp., 415volts
1
12424
12424.56
LT PANELS: Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).
Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition. Painting:- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work. Busbars:-The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. Metering:-The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:-
-
-
-
LT Panel enclosure having space for 1No. Incomer MCCB 160Amp. and 4Nos. outgoing MCCB's 40amp. to 100amp. according to the requirement at site (Approx. size 1825 x 900 x 300mm)
1
62616
62616.46
MCCB's (FOR PANELS & SHEET ENCLOSURE): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
4
7744
30978.8
MCCB Four Pole 160amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
11260
11260.86
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double walled corrugated (DWC) HDPE pipe 63/51 mm (outer/ inner dia.)
100
155
15592
Supply and Erection of 5 Star Rating BLDC Ceiling fan Suitable size 48” (1200mm) Full Aluminium Body, 3 Nos. of Blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air delevery of 230 CMM. The rated speed of the product must be minimum of 350 revolutions per minute and 5 Nos. of speed. The approximate weight of the product should be 4kg and 180gms (without packing) or higher. The product should be power consumption of 32 Watts and Frequency of 50 Hz. The product should have a manufacturer's guarantee/ warranty of minimum 2 years. The product should be complete in all respects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fans having connection with PVC insulated PVC sheathed tow single core copper conductor (FR) cable 0.75 SQ MM. Complete in all respects as desired by the Engineer in charge of work at site. The Product should be BEE & BIS Certified.
15
4200
63000
Supply and Erection of Wall fan Suitable size 16" (400mm) including connection & testing. Complete in all respects as desired by the Engineer in charge of work at site. BASIC FEATURES - Sweep size : 400 mm, No. of blades : 3, Adjustable upward and downward tilt mechanism: Yes, Guard : 120 Spokes, Motor speeds (No.) : 3, Motor type : Normal Speed, Oscillation : Yes, Oscillation degree : 60˚, Remote control option : No, Reversible blades : Yes, Switch : Yes, DESIGN FEATURES - Blade design : Aerodynamically designed & Blanced Blade, Blade finish : Transparent, Body colour : White, Finish : Glossy, Pull cord : Yes, DIMENSIONS AND WEIGHT - Packaging dimensions WxHxD : 46.8 cm x 20 cm x 46.8 cm, Weight : 3.3 kg, PERFORMANCE FEATURES - Rated Speed : 1350 revolution per minute, Air delivery : 72 m³/min, Noise level : 63.2 dB, POWER FEATURES - Power Consumption : 50 W, Rated frequency : 50 Hz, Rated Voltage : 230 V, SAFETY FEATURES - Motor protection through thermal overload protection device : Yes. The Product should be BEE & BIS Certified.
8
3180
25440
Supply and Erection of 36 Watt 2X2 LED Recessed Mounted Panel light Fitting (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the Lighting Fixture manufacturer should have inhouse NABL accredited LAB.
24
3635
87240
Supply and Erection of 15 Watt Round surface mounted LED Downlight with Pressure die cast aluminium housing & polycarbonate diffuser and efficacy of LED fixture minimum 100 lumens per watt complete in all respects as approved and desired by the Engineer in-charge at site. The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the Lighting Fixture manufacturer should have inhouse NABL accredited LAB.
13
1450
18850
PROVIDING VIDED CONFERENCE SYSTEM:
-
-
-
SITC of Gooseneck microphone with table stand: Cardioid Condenser Gooseneck Microphone with Frequency Response 150-16,000 Hz; Open Circuit Sensitivity: -53 dB (2.2 mV) re 1V at 1 Pa, Impedance 250 ohms or better completew with Foam Windscreen. Anti-Shock Microphone Stand with on/off Switch.
18
36836
663048
SITC of Compact Full Range 4" Ceiling Speaker with 30 W RMS power @ 8 Ohms, Frequency Response (±3 dB) 102Hz-20kHz, Frequency Range (-10 dB) 70 Hz - 20 kHz, Sensitivity 84 dB, 120 degrees Coverage, Maximum SPL 99 dB Average and 105 dB Peak, Transformer Taps @ 70 V/100V: 25 W/12.5 W/6.3 W, UL and EN 54-24:2008 certified Type A with steel back can.
16
14018
224288
SITC 2 Channel 2 X 60 Watt Commercial Amplifier with Energy Star Certification, 60W output per channel into 8,4,Ohms and 70V.
8
67529
540232
SITC of Single Channel Wireless Handheld Microphone, With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, Intuitive receiver and transmitter controls, The ATW-T3 Handheld Transmitter is a cardioid condenser microphone designed to be used exclusively with the AT-One UHF wireless system, Up to 10 hours battery life, Delivered in a transport case with a rack mount kit and detachable antennas
2
20788
41576
SITC of 12 x 8 Digital Mixer Processor. 10 x AEC Mic/Line Input & 2 x Stereo Input. 8 x Line output & 2 xStereo Output. Full-matrix mixer with flexible input/output assignments. USB audio I/O. Signal-to-noise ratio: 90dB or better Dynamic Range: 110dB, Maximum input level MIC: -20 dBu, LINE: +24 dBu. USB audio interface for soft codec application. Digital Network Link Port for future expansion. IP / RS232 port for third-party control.
2
252141
504282
SITC of High brightness from a compact body. No Light-Source Replacement for 20,000 Hours Reusable air filter extends maintenance. 1.6x Zoom Lens and Lens Shift Function. Wireless Projection Function with Optional Module. 3,000,000:1 Dynamic contrast ratio.6,000 Im, WUXGA, portable LCD laser projector designed for education and corporate environments. This projector supports 4K and 30p signal input, making this projector a future-proofed solution to projecting the latest image quality and content. Resolution 1920 x 1200 pixels Laser 3LCD WUXGA projector 6,000 lumens Contrast 3,000,000:1Support 4K and 30p signal input. 16 mm diagonal (16:10 aspect ratio). Laser diode HDMI 19-pin x 2 Transparent LCD panel (x 3, R/G/B)
1
331022
331022
SITC of Projector screen remote operated Size 140"With Remote Control Matt White Fabric With Motor.
1
198613
198613
SITC of 75" display for side wall. Panel technollogy VA/IPS, Brightness 350 nits, HDMI 2,USB 1, RJ 45 X 1, Rating IP5X, Speaker 10 watts x 2, certification CE, UL, EMC class A or B, Haze 2%
2
191804
383608
SITC of 55" display for chairman. Panel technollogy VA/IPS, Brightness 350 nits, HDMI 2,USB 1, RJ 45 X 1, Rating IP5X, Speaker 10 watts x 2, certification CE, UL, EMC class A or B, Haze 2%
1
112548
112548
SITC of VC Codec complete with camera and required accessories, video standrad. H.261, H.263, H.263+, H.264, H.264HP, ITU-T H.239, BFCP. It should be suplied with 1+3 Party License. Audio Codec G.711, G.722, G.722.1, G.722.1C, AAC-LD, G.723.1, G.726, G.728, SILK or better. Aspect Ratio 16:9, Resolutions of 1080p@60fps & 30fps, 720p, 4CIF/4SIF, CIF, QCIF, QSIF, SQSIF, SQCIF or more. support Dual Display, 1 DVI-I input, 2 HDMI outputs, 2 Audio inputs, 2 Audio outputs, Resolutions of 1080p@60fps & 30fps, 720p, 4CIF/4SIF, CIF, QCIF, QSIF, SQSIF, SQCIF or more 1080P with camera sensor: 2.07M effective pixel, 1/2.7-inch CMOS or better. It should have an optical zoom of 12x and 16x digital zoom, It should have a maximum horizontal angle:72.5° or more. It should have a Pan/Tilt angleof 44.8° ~ 3.9° or better. it should have automatic White Balance (AWB), Automatic Exposure (AE), Automatic Focus (AF). It should support Far-end camera control and eight or more preset positions, 64 Kbps to 8 Mbps in a Point to Point call and multipoint call
1
463886
463886
SITC of Flip Up In-Desk Connectivity | 2 HDMI & USB-C Passthrough | USB Charging | RJ-45 | Multi- Standard Mains Outle,
3
70534
211602
SITC of 4-Input 4K30Hz Switcher | USB 3.0 | Airplay & Miracast Dual Output | Supports APO DG1 Dongle (4K: 40m/131ft)
1
174780
174780
SITC of 4K60Hz 8x8 HDMI Matrix | Dolby Vision & HDR | Scaling Outputs | Balanced Audio De-embed CEC
1
375115
375115
SITC of 1080p60Hz UTP Extender | USB 2.0 | PoC
5
32043
160215
SITC of 4K60Hz HDBaseT ™™ Extender Set | Dolby Vision & HDR | PoH | RS232 & 2-Way IR
Passthrough (4K: 35m/115ft, 1080p: 70m/230ft)
7
64801
453607
SITC of Network Based Hardware server gateways for AV system control -Netwrok based AV Control Processor, With built-in / external 3 interface device license each for i-Pad and Android touch interface licence. Integrated or external Console for touch panel to control board room, AV asset management over the network, PC Based Central Control, Monitor and Management (integrated or external). It shall be scalable to any size installation, Built-In room management software, GUI-based configuration platform, Dual Gigabit Ethernet ports for isolating a dedicated AV LAN from the facility or corporate network. RS232, IR and Relay ports through IP conversion points, Supports industry-standard, network security features and protocols, iPhone, iPad, and Android control app support for minimum, Complete with User Interface License for Android and Apple devices, RS232 Port, RELAY PORT, IR converter
1
373695
373695
SITC of Apple iPad Tablet (9.7 inch, 32GB, Wi-Fi), Space Grey, etc complete with accessories
1
66204
66204
SITC of Dock station for iPad, etc complete with accessories
1
64880
64880
SITC of 24-Port PoE Network Switch, 24 x 10/100/1000BASE-T PoE ports, 4 x Gigabit RJ45/SFP Combo ports, Advanced L2 switching and security features L2+ Static Routing, Optional "standard mode" or "surveillance mode" management user interface, 193 W PoE budget,
1
64218
64218
SITC of Wifi Directional Access Point Omni directional to support 802.11 b,g,n, ac and PoE should work in controller less environment
1
33101
33101
SITC of 24U AV Rack with Multi power socket 15 amp and 5 amp multi supply modules and ventilation fan.
1
58922
58922
SITC of 2m/6.5ft HDMI 2.0 Cable | 18Gbps 4K60Hz | Dolby Vision & HDR JARC, CEC, ALLM, VRR, | CL3 & VW-1 Rated,
20
2622
52440
SITC of 2m/6.5ft USB-C to C Cable | SuperSpeed USB 20Gbps | 4K60 Alt-Mode | 100w PD
3
4369
13107
SITC of Speaker Cable, 2 core 2.5 Sq mm Speaker Cable(as per actual),
300
181
54300
SITC of Microphone Cable, 2 core sheilded 22 AWG Microphone Cable (as per actual),
500
118
59000
SITC of TP Cable, Shielded CATx Control & Signal Cable. (as per actuals)
900
38
34200
SITC of Various Connectors & Accessories,
50
457
22850
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%