Public Works Department Tender

Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge (Tile design and pattern will be as per guidelines issued for disabled persons

Providing and fixing acrylic Braile indicators of size 170mm x 35mm to be fixed on handrails of the the approved design and make having Braile dots raised 0.5mm above base plate, to the installed at the specified locationscomplete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and Installation of Safety signage as per guideline for person with disability made of retro reflective sheeting as per colour specified and writing matter will be of same material in white fixed / pasted over 4mm thick aluminum composite sheet, including cost of writing matter with braille also firmly fixed on wall with nylon fastener, brass screw and washer complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and laying 50 mm wide antiskid tape made of slip resistant material colour contrast, edge strip, self adhesive to be fixed on front edge of Stair treads to help people with visual disabliity and elderly even in dim light conditions & reduce the risk of slipping. complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and laying 25 mm to 50mm wide high intensitiy reflective conspicuity tape colour contrast, edge strip, self adhesive to be fixed on front edge of Stair riser to help people with visual disabliity and elderly even in dim light conditions & reduce the risk of slipping. complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and fixing Automatic Doors complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and supplying Wheelchairs for mobility aids.complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and Installation of Tactile Layout plan of building along with braille and audio system at entrarance of the builiding.complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Construction of Accessible Parking Bays

Dismantling concrete complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Cement concrete 1:2:4 with stone ballast 40 mm gauge complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Informatory sign board 600x450mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 3mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Cutting of floor topping of concrete / Kota Stone / any kind of marble/ tile floor depth up to 50mm with the help of mechanical cutter and chisel (with due care so that surrounding floor should not be damage) to lay the tactile flooring 300mm wide including cost of providing and laying 25mm to 28mm thick cement concrete 1:2:4 as per requirement complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability) complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Construction of Accessible Reception Counter

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 meters. complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Cement Concrete 1:4:8 with stone ballast using mechanical mixer volumetric type.complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Reinforced Cement Concrete M-25 in super structure complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Centring and shuttering for flat surfaces such as roofs etc. complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Extra for smooth surface for flat surfaces such as roofs etc. complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

CTD bars Fe-500 grade for RCC reinforcemnt complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability) complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-ChargePolished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Extra for pre finished nosing to treads of steps of marble stone. (Full gola, half round gola etc.) complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 For fixed portion & Chaukhat. complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5mm thickness complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge

Providing polyester powder coating 50 micron any colour specified to aluminium section of various sizes complete in all respect complete in all respect as per entire satisfaction of Engineer-in-Charge