Public Works Department Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 33,67,617Document Cost
₹ 50,000Tender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CEPW_127629_1Bid Award Id
ViewTender No
16 of 17.09.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Udaipur Green Marble Tiles of thickness 18mm to 20mm using Slabs sizes above 0.50 sqm
1372.81
1734119
1263.19
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
195.56
138859
710.06
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/HighlyGlossfinish/ Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
259.14
217584
839.64
Conglomerate floor 25mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling. using mechanical mixer for mixing of material
120.03
93162
776.16
Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded).
2815.2
1615981
574.02
Cost of New Tiles to be Replaced
20832.45
140410
6.74
Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.
355.71
339514
954.47
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) Size 1500mmx600mm or any other size
12
34980
2915.03
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.60 mm (+ 0.05 %) thick
167.22
111865
668.97
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
10.62
114684
10798.96
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
31.99
195988
6126.54
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
9.21
61868
6717.5
12.5 mm thick cement plaster 1:4
419.13
84337
201.22
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
13240.77
850851
64.26
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
7925.62
1177271
148.54
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/ 10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
5760.94
837525
145.38
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
-
-
-
Cup board frame of size 75mmx45mm with 25mm wide single rebate
176.78
75437
426.73
Red meranti Super (18 to 19 kg per cft.Approx.) cup board shutter with plywood panels or faced on both side fixed in position 30 mm thick
91.97
207442
2255.54
Providing & Fixing decorative high pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
91.97
107741
1171.49
Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x
47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19x19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
62.18
31181
501.47
Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020-1998,Drawings and to the entire satisfaction of engineer-in-charge.
23.41
69819
2982.46
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings. For shutter area above 0.50 sqm
115.38
13492
116.94
Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
72
6523
90.6
Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect 5.0mm thick Plate glass (INDIAN)
375.18
305133
813.3
Extra for providing & fixing Steel beading of approved shape steel tube beading size 12mm X 12mm, 18 gauge of approved shape and section with screw for fixing of glass panes instead of glazing clips and metal slash putty in steel doors, windows & Ventilators complete in all respect
35.37
2504
70.8
Dismantling of Reinforced cement concrete
12.33
28629
2321.91
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
12.33
82826
6717.5
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
21.55
169747
7876.91
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
177.8
99649
560.46
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
80.95
64305
794.38
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
7.7
47174
6126.54
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
36.87
2640
71.61
20mm thick cement plaster 1:4 in two coat work
67.46
18691
277.07
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
-
-
-
Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.
416.01
226500
544.46
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973
-
-
-
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm Thick
189.84
461390
2430.42
Providing & Fixing decorative high pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
379.67
444779
1171.49
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
189.84
22199
116.94
Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type
148.29
807502
5445.43
Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works where not including in the complete rate of RCC including bending and binding placing in position complete
148.29
1168066
7876.91
Providing and Fixing Roller Blinds of approved quality by Engineer in Incharge
3828.97
1016514
265.48
Outer Infrastructure, Beautification & Parking Pavement,
-
-
-
Cement Concrete 1:8:16 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
1081.42
4194038
3878.27
providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with rubber mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.
7900.03
5493522
695.38
Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications
2449.89
922849
376.69
Construction of Assembly Stage
-
-
-
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
19.87
3809
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
3.31
14475
4373.24
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
13.93
80764
5797.85
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
8.21
50282
6124.54
Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation & taken only from outside the building plinth in 15 cm layers including ramming watering and consolidation lead upto 30 metres
68.36
31463
460.26
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
88.07
43643
495.56
Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
29.26
14826
506.73
20mm thick cement plaster 1:4 in two coat work
119.33
33062
277.07
Construction of Main Gate & Primary Gate
-
-
-
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
65.07
12476
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
6.51
28469
4373.24
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
15.32
90807
5927.37
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
11.68
78460
6717.5
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
9.56
55427
5797.85
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
3.58
21933
6126.54
20mm thick cement plaster 1:4 in two coat work
25.94
7187
277.07
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
121.65
7817
64.26
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
121.65
2690
22.12
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
121.65
12815
105.35
Iron grated doors, including pintle hinges & arrangements.
32.81
357815
10905.69
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
32.81
829
25.28
Painting two or more coats xcluding priming coat with synthetic enamel paint in all shades on wood work, metallic or lastered, concrete surface to give an even shade.
32.81
2281
69.53
Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge. 6mm Thick ACP Sheet
18.68
61301
3281.65
Cement Concrete 1:8:16 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type
10.4
40334
3878.27
providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with Rubber mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.
34.14
23740
695.38
Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications
36.58
13779
376.69
Construction of shed for Mid-Day Mill
-
-
-
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
35.4
6787
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
3.54
15481
4373.24
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
32.5
192639
5927.37
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
9.91
66570
6717.5
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
3.82
22147
5797.85
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
3.06
18747
6126.53
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
92.94
46057
495.56
Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with
-
-
-
Udaipur Green Marble Tiles of thickness 18mm to 20mm using Slabs sizes above 0.50 sqm
92.94
117445
1263.67
Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works where not including in the complete rate of RCC including bending and binding placing in position complete
9.91
78060
7876.91
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position. Providing and fixing Industrial shed trusses usiing MS Pipe 80mm x 80mm x 4.8mm
0.99
10690
10798.96
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.60 mm (+ 0.05 %) thick
128.81
86170
668.97
Renovation of existing G.F and Construction of F.F. with Ramp & Stairs
-
-
-
Scraping of walls White wash and colour wash
744.55
5487
7.37
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
874.58
56200
64.26
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
455.7
65771
144.33
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/ 10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
288.85
30430
105.35
NEW CONSTRUCTION OF PROPOSED STAIRS AND FIRST FLOOR
-
-
-
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
29.15
5589
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
3.59
15699
4373.24
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
5.87
34033
5797.85
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
12.57
74507
5927.37
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
18.85
4170
221.24
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
92.5
621368
6717.5
Extra for R.C.C/PCC. work done in each subsequent storey above the first storey up to height of 4 metres or part thereof up to the roof top level of that storey.
84.6
16131
190.68
Centering and shuttering for columns (Square or rectangular or poly gonal in plain)
76.58
38482
502.52
Extra rate for shuttering in each subsequent storey above the first. Storey work done in subsequent storey above the first storey up to height of 4 metres or part thereof up to the roof top level of that storey.
1.98
20
10.54
Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
161.97
64841
400.33
Extra rate for shuttering in each subsequent storey above the first. Storey work done in subsequent storey above the first storey up to height of 4 metres or part thereof up to the roof top level of that storey.
133.33
1405
10.54
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
498.32
279288
560.46
Extra rate for shuttering in each subsequent storey above the first. Storey work done in subsequent storey above the first storey up to height of 4 metres or part thereof up to the roof top level of that storey.
488.51
5148
10.54
Centring and shuttering for stair cases with sloping with soffits including risers and stringers.
18.81
8838
469.86
Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works where not including in the complete rate of RCC including bending and binding placing in position complete
105.28
829281
7876.91
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
95.94
587780
6126.54
12.5 mm thick cement plaster 1:4
325.23
65442
201.22
20mm thick cement plaster 1:4 in two coat work
570.54
158079
277.07
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
895.77
57562
64.26
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
895.77
129286
144.33
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
570.54
60106
105.35
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
-
-
-
Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.
7.32
3957
540.61
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.
3.35
2110
629.99
Base course of floor consisting of 100mm thick cement concrete 1:8:16
96.61
47876
495.56
Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with
-
-
-
Udaipur Green Marble Tiles of thickness 18mm to 20mm using Slabs sizes above 0.50 sqm
125.47
158552
1263.67
Providing and fixing mineral fibre false ceiling tiles (NRC 0.55 to 0.6) at all heights of size 595X595x16 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k= 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24 x 24 x 3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
149.47
264700
1770.93
Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and tothe entire satisfaction of engineer-in- charge.
22.98
31980
1391.67
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
327.46
260127
794.38
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
82.62
5916
71.61
Providing & fixing 16 gauge stainless steel pipe of top of various size railing of grade 304 duly fixed on ramp with the help of bolts grouted on floor with hand rail and newel post of 50mm dia Stainless steel pipe , Balusters of 40mm dia Stainless steel pipe complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge.
172.87
87598
506.73
CONSTRUCTION OF PROPOSED RAMP IN EXISTING BUILDING
-
-
-
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
86.66
16616
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
8.67
37915
4373.24
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
96.73
560826
5797.85
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
145.09
32099
221.24
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
35.07
235582
6717.5
Centering and shuttering for columns (Square or rectangular or poly gonal in plain)
158.88
79840
502.52
Extra rate for shuttering in each subsequent storey above the first. Storey work done in subsequent storey above the first storey up to height of 4 metres or part thereof up to the roof top level of that storey.
1.5
15
10.54
Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
43.5
17414
400.33
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
27.34
15322
560.46
Centring and shuttering for stair cases with sloping with soffits including risers and stringers.
107.92
50707
469.86
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
683.95
5387412
7876.91
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
14.05
86077
6126.54
20mm thick cement plaster 1:4 in two coat work
245.91
68134
277.07
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
245.91
15802
64.26
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
245.91
25906
105.35
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
87.83
43482
495.08
Providing and Laying Out Door Precast Designer chequered tiles of size 300*300 mm & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3(1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
70.26
76082
1082.87
Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability)
17.57
33663
1915.97
Providing & fixing 16 gauge stainless steel pipe of top of various size railing of grade 304 duly fixed on ramp with the help of bolts grouted on floor with hand rail and newel post of 50mm dia Stainless steel pipe , Balusters of 40mm dia Stainless steel pipe complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge. (Railing on Enterance Ramp Design as per guidelines issued for persons with disability)
57.62
29197
506.73
Renovation of Existing Toilet Blocks
-
-
-
Internal Water Supply, Sewerage, Sanitation
-
-
-
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
Single Socket Type A
-
-
-
110mm o/d single socket SWR UPVC pipe lines laid complete
200
59558
297.79
75mm o/d single socket SWR UPVC pipe lines laid complete
200
43648
218.24
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm i/d pipes
-
-
-
Elbow 90 Degree (All side socketed)
20
3086
154.31
Coupler
20
2109
105.45
Single Tee With Door
20
4486
224.32
For 75mm i/d pipes
-
-
-
Coupler
15
1063
70.92
Floor Trap 110mm x 75mm
15
4413
294.25
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
15
27480
1832
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects.
-
-
-
uPVC Pipe 6 Kgf/cm2
50mm i/d
128
22048
172.25
Sub Head-2 Internal Water Supply System
-
-
-
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
CPVC SDR 11 Pipe & fitting 16mm o/d
120
21446
178.72
SDR 11 CPVC pipes & fittings 20mm o/d
200
44270
221.35
CPVC SDR 11 Pipe & fitting 25mm o/d
150
42862
285.75
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
470
32430
69
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
Through wall 22.86 cm thick
25
5973
238.93
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
-
-
-
15mm i/d G.I. Union
20
1820
91
20mm i/d G.I. Union
20
3016
150.83
25mm i/d G.I. Union
20
3807
190.38
Painting G.I. Pipes and Specials with synthetic enamel Paint in all shades as per I.S.I. specification on existing or new work, two coats paints including cleaning rubbing surface, etc.
-
-
-
15mm & 20mm i/d G.I. Pipe
180
772
4.29
25mm & 32mm i/d G.I. Pipe
122
688
5.64
Sub Head - 3 Sanitary Installation
-
-
-
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut
15
5430
362
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
15
1245
83
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 550 mm x 400 mm x 815mm
10
36140
3614
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 375 mm with PTMT nut
20
2320
116
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
20
2260
113
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
C.P. brass Bib cock long nose/ long body without flange
10
11530
1153
Providing & Fixing in postion CP Brass Spout Operated Pillar Tap with base flange (for foot operated valve) of approved make (to the approval of Engineer-in-charge) complete in all respect (instead of Pillar tap in Lavatory Suites).
25
16950
678
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
C.P.brass 15mm Angle valve without flange
25
20650
826
C.P.brass 15mm Concealed stop cock with flange
15
18060
1204
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
7
441
63
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.
C.P. Brass extension piece, 25mm long to 50mm long
15
1605
107
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
10
11990
1199
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
C.P. Brass Accessories:
-
-
-
C.P. brass toilet roll holder with flap
20
22300
1115
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
Aluminium khunti with 3 pegs
20
3580
179
Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineerin- charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect.
-
-
-
Size 470mmx370mmx180mm
15
96390
6426
Construction of Basket Ball Court
-
-
-
Dismantlling Plain Cement Concrete 1:2:4 mix
61.11
87878
1438.03
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
14.17
2716
191.74
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
8.88
54403
6126.54
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
21.37
93456
4373.24
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
61.11
362221
5927.37
Extra for computerised concrete batch mixing plant including carriage by transit mixer within 1 km lead
61.11
7982
130.63
extra for pumping charges of batch mix concrete /Ready Mix Concrete work
61.11
5665
92.71
Extra for carriage of RMC/batch mixed concrete with transist mixture beyond 1st km (Lead 10-1)=9Km
61.11
19700
322.37
Extra for Using OPC cement instaed of PPC cement.
409
10225
25
Providing & Laying Synthetic paint /Plastic Paint 2 two coat
607.88
40120
66
Cutting grooves in floor topping by using mechanical means
53.77
3279
61
Punjab School Facelift
-
-
-
Laboratory WorkBench - Understructure
-
-
-
Providing and fixing Laboratory Tables Understruture consists of D- Frames Assembly, Horizontal members with Grantie Top and Cover Panels. These understructures shall be of 900mm Height as per site requirement or as per the Direction of Engineer-in-Charge. The measurement of understructure will be done from Top Surface Area.
-
-
-
D-Frame Assembly
-
-
-
All D-Frames assemblies should be manufactured from standard hollow metal sections; confirming to 1.5. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to 15 Code 513:1994. The dimensions of D Frame shall depend upon the depth of the understructure. The overall depth of D-Frame shall be 705 mm for 750mm Depth structure (Referred as F in Drawing) and 235mm for 750mm Depth Extended Frame (Referred as G in Drawing). All frame-work should be pre-treated with superior pure epoxy powder coated finish with 50 micron thickness. The structure of D-frame with horizontal units should withstand 10 degree tilt (backwards) without toppling. The D-Frames should have a provision to fix suspended storage cabinets. Side frame welded MS ERW tube of dimension 30 x 30 x 1.6mm thickness. Bracket for pipe: MS CRCA 2mm thick. Wall grounting bracket: MS CRCA 2mm thick.Levelling screws: 4 nos. of M 10 levellers (MS + Nylon) Adjustments possible with range 20mm. Anchoring bolt of Hilti make.
159.03
102084
641.92
Horizontal Member
-
-
-
Horizontal memebers are used to join 2 D-Frames to form the structure. Horizontal members should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 30 x 30mm with a minimum of 1.6 mm. They should be made of CRCA MS and coated with pure epoxy powder. Horizontal members connect two D-Frames together by using C-clamps/U- clamps. Together with the D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent D-Frames. They should be available in various widths of 450, 600, 900, 1050, 1200, 1350, 1500, 1650, and 1800. There must be 3 nos of horizontal members between two D frames
121.95
78282
641.92
Cover Panels
-
-
-
All side cover panels and back panels, leg space panels, filler panels should be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating with thickness of 40-60 microns, bracket of min.1.2mm thickness
12.89
75974
5894.1
Work Top
-
-
-
The complete structure shall be provided with a Worktop made of 20mm (+/- 2mm) thick Jet Black Granite. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V- groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material used is a neoprene mat of 6 mm thickness, which should be pasted on the frame structure using SR Glue. A representation the worktop edges is shown. The joints between granite must be filled using black silicon sealant and masking tape must be used while installation to ensure proper filling.
32.45
192527
5933.04
Laboratory WorkBench - Storage Units
-
-
-
Providing and fixing Work bench Storage cabinets. The storage cabinet shall be Welded body with load bearing members such as top, bottom and stiffeners made of 0.8mm thick CRCA Sheet. A drawer separator shall be provided made of 1.2mm thick CRCA sheet. The storage unit shall be provided with a shelf made of 0.8mm thick CRCA sheet which is adjustable to 6 steps of 50mm. Each shelf to have load carrying capacity of 40 kgs. Shutter is over-closing with 270 degree opening. It has a sandwich construction with profile as a sound dampener. The drawer shall be Welded filled with profile as sound dampener Single piece construction with an over closing drawer. The complete storage unit should be pure epoxy powder coated with thickness of 40-60 microns and is suspended from tubular structure, with an overlay shutter. The cabinet has a corrosion resistance magnetic strip as shutter catch, shutter and drawer are equipped with 180 degree cam lock. Semi recessed handle and SS-304 five knuckle overlay hinge with 270 degree opening. Drawer and Shutter shall be provided with a lock 180 Degree cam with 4mm thick lever. Cabinet fixing brackets of 2mm thickness. Rate does not includes the rates of understructure, rates of understructure will be provided in Item No 1. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.
-
-
-
Storage unit of Size 600mm(W) x 450mm(D) x 675mm(H) with 1 Drawer and 2 Shutters
34
453757
13345.8
Laboratory WorkBench - Sink Units
-
-
-
Providing and fixing Sink unit of size 750mm(W0 Which comprises of sink Cabinet, Polypropylene Sink Unit and 1-Way Goose Neck 360 Degree Revolving Faucet.
15
237392
15826.16
Sink Cabinet
-
-
-
Providing and fixing Sink cabinet. The Sink cabinet shall be Welded body with load bearing members such as top, bottom and stiffeners made of 0.8mm thick CRCA Sheet. The cabinet unit shall be provided with Pair of Shutters. Shutter has a sandwich construction with profile as a sound dampener. The complete unit should be pure epoxy powder coated with thickness of 40-60 microns and is suspended from tubular structure, with an overlay shutter. The cabinet has a corrosion resistance magnetic strip as shutter catch and shutter. Semi recessed handle and SS-304 five knuckle overlay hinge with 270 degree opening. Cabinet fixing brackets of 2mm thickness. Rate does not includes the rates of understructure, rates of understructure will be paid in Item No 1 All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.
-
-
-
Polypropylene Sink Assembly
-
-
-
Providing and fixing Polypropylene Sink with PP Waste, Anti-Siphon Bottle Trap & Flexible Drainage Pipe. Sink bowl shall be Polypropylene Molded made up of 5mm thick high density and elastic poly propylene with good resistance to organic solvents. Standard bowl size is 500mm(L) x 400mm(W) x 300mm(D).
-
-
-
1 Way Water Faucet
-
-
-
Providing and fixing 1-Way 360 Degree Revolving Water Faucet. Faucet fittings should be laboratory grade. Water faucet and valve bodies should be cast red brass alloy or bronze forgings, all fittings should be powder plated. Brass as per IS:319, Pipe as per: IS:407,0 utlet nipple in PP construction. PP knob to be used. All gasket and O- ring of Nitrile Rubber make. Inlet connection 1/2" BSP. Gooseneck spout with 360 degree rotation with 500000 life cycles. Pneumatic test at 250 psi, hydraulic test at 125 psi, bursting test at 500 psi. Coating to be glossy epoxy fusion bond.
-
-
-
Laboratory Tables - Reagent Racks
-
-
-
Providing and Fixing 2 tier Island Bench Reagent Racks of Size 1050mm(L) x 300mm(W) x 680mm(H). It should be complete modular design consisting of 2 stage horizontal storage shelves made of minimum 1.2 mm thick frame. Shelf: Fixed-Type reagent shelves have 1.2mm thickness consisting of 2 stage horizontal storage shelves made of minimum 1.2 mm thick frame. CRCA MS with pure epoxy powder coating and having 4 cutouts of 3 module for electrical switches and sockets on a raceway running under the shelves. It should have provision for placing Granite pieces. All the members are knock down and can be restructured. The the metal part cutout should be of 0.8mm thickness. The finish should be pure epoxy coating of 50micron thickness.Load carrying capacity of 70kg for Island table. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.
-
-
-
1050*300*680 mm
6
58056
9676
Providing and fixing 2 Tier Wall Bench Reagent Racks of size 1200mm(L) x 150mm(W) x 680mm(H). It should be complete modular design consisting of 2 stage horizontal storage shelves made of minimum 1.2 mm thick frame. Shelf: Fixed-Type reagent shelves have 1.2mm thickness consisting of 2 stage horizontal storage shelves made of minimum 1.2 mm thick frame. CRCA MS with pure epoxy powder coating and 2 having cutouts of 3 module for electrical switches and sockets on a raceway running under the shelves. All the members are knock down and can be restructured. The the metal part cutout should be of 0.8mm thickness. The finish should be pure epoxy coating of 50micron thickness.Load carrying capacity of 70kg for Island table. All the above items should be as per photo, sketch specifications & direction of engineer-in-charge.
-
-
-
1200*150*680 mm
2
20838
10419.4
Work Tables - Electrical Trunking
-
-
-
Providing and fixing Electrical Trunking of size 220mm(L) x 90mm(H) for housing electrical switches and sockets including electrical wiring within table complete. Trunking top panel, bottom panel and body should be made from minimum of 0.8mm thick CRCA MS sheet with pure epoxy powder coating of 40-45 microns. The front surface that houses the electrical points should have a slope. All the above items should be as per photo, sketch specifications & direction of engineer- in-charge.
12
18266
1522.2
Work Tables - Switch Sockets
-
-
-
6 A (1M), 6 pin shutter socket (2M),3 modular plate including wiring within table
22
42418
1928.12
16 A (1M), 6 pin shutter socket (2M),3 modular plate including wiring within table
22
46286
2103.94
LPG Gas velves
-
-
-
Providing and fixing laboratory grade 1 way LPG gas valve made from high quality brass forging grade as per IS:8737 (2007) and machining grade as per IS 319 to avaoid porosity and leakage. Taps are powder coated with glossy epoxy fusion bondd. pneumatic test at 250 psi, hydraulic test at 125 psi, bursting test at 500 psi. Valves should be identified with service indexes in the color coding as per DIN 12920. all the above items should be as per photo, sketch specifications and direction of engineer in charge
5
9115
1823.1
Providing and fixing laboratory grade 2 way LPG gas valve made from high quality brass forging grade as per IS:8737 (2007) and machining grade as per IS 319 to avaoid porosity and leakage. Taps are powder coated with glossy epoxy fusion bondd. pneumatic test at 250 psi, hydraulic test at 125 psi, bursting test at 500 psi. Valves should be identified with service indexes in the color coding as per DIN 12920. all the above items should be as per photo, sketch specifications and direction of engineer in charge
1
2680
2680.96
Lab Top Units
-
-
-
Providing and supply of Welded Top Units: Over head cabinets are Pure epoxy powder coated with thickness of 40-60 microns and should be fixed on the wall. The cabinet will have a corrosion resistance magnetic strip as shutter catch, shutters are to be equipped with 180 degree cam lock. PP constructed semi recessed handle to be screw fitted to the shutters. Hinges are of SS-304 knuckle overlay type with 270 degree opening and 2 nos of hinges are to be screw fitted to each shutter and cabinet. Unit Construction: It will be Welded body construction with load bearing members such as top, bottom and stiffeners should have a minimum thickness of 0.8mm. Shelf will be made of 0.8mm thickness which should be adjustable to 6 steps of 50mm Shutter will be over-closing type. It has a sandwich door construction with shutter front & shutter cover with 1.2mm thick hinge stiffener. Empty gap should with filled with 15mm thick paper honeycomb for sound dampening. Units will be of size 450x320x674mm
35
279229
7977.98
(Block Signage 35 x3.5)
-
-
-
Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
0.71
7108
9997.72
Designing, fabricating, testing, installing and fixing in position Curtain Wall with aluminum Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
52.84
173179
3277.44
Graphics film - Graphic film applied on ACP should be high quality Cast vinyl of thickness not more than 60 Microns without adhesive when measured using ASTM standard of measurements. The Adhesive of the film should be a Grey colored pigmented adhesive and it shall stick, without the use of an activator such as solvents or heat on any metallic and painted, primed, polished and Clean surfaces free from any grease or silicone without producing wrinkles, rolling up, tearing or detaching. The adhesive of the film should be a pressure activated adhesive providing repositionability and has in built air release channels to provide a bubble free application. The liner of the Film should be a high-quality Paper liner which has a polyethylene coating on both sides to provide excellent lay flatness while converting. The Graphic film should not contain any Heavy metals in its construction and should be compliant with the limits of RoHS Directive 2002/95/EC and its Subsequent amendments. The Film should not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. The film should have fire retardant properties and should have a flame spread index of 5 or less and Smoke spread index of 0 when tested as per ASTM E 84 standard of flammability testing. The film should also comply with ASTM E 162-94 flammability standard and should have a Flame spread index of less than 1.90. The name of the manufacturer / brand should be clearly displayed on the liner.(Make:- 3M Ij180c or Avery Dennison MPI-1105)
52.84
128238
2426.93
Overlaminate - The graphic film must be protected using Matt finished high-performance cast over-laminate with not more than 2mil thickness. Laminate must be designed for Flat and smooth application. It should also possess Resistance to mild alkalis, mild acids and salt, additionally resists occasional fuel spills. This product qualifies Flame Spread Index 15, smoke development index 10 as per product flammability test conducted by ASTM-E84 standard method. This product does not exceed the maximum concentration values (MCVs) for phthalates set under EU Directive 2011/65/EU(RoHS recast/RoHS 2), as amended by EU 2015/863, which applies to finished EEE after July 22, 2019 for Category 1-7, 10-11 products and after July 22, 2021 for Category 8 and 9 products. This means that each of the homogenous materials within this product does not exceed the MCV of 0.1% (by weight) for each of the following phthalates: DEHP, BBP, DBP and DIBP. (Make:- 3M 8520/AveryDennison DOL-1080)
52.84
76293
1443.85
Providing And Fixing 3 inch raised channel letters with CNC Cutting of Acrylic Sheet as per design , Fixing ACP cup
37.62
1706876
45371.52
Electrical Charges
37.62
512684
13627.99
(Main Gate Signage)
-
-
-
Providing and fixing Main Gate Signage having size 24X4 of Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers, entry point signage glow board woth Acrylic wards / logo fryed on ACP 3mm sheet of various thickness high class ISI markedincluding MS frame fixed on wall complete with MS angle and flats including cutting, Pocsswe posting, cutting of wood maters with computer ploter and design layout of bound and fixing with high quality screw and PVC plug, PVC insulated FR single core unsheated copper conduct cable ISI marked suitable upto 1100 volts grade confirm to, logo printed via UV Printing Three layer Printing with white Ink over Printable Cast Media Fixed on Acrylic sheet including Laser cutting of Acrylic Sheet and ACP Sheet, Pipe or casing of suitable size as desire by engineer-in-charge and as per approved drawing complete in all respect
8.92
195562
21924
Signage at School of Eminence Punjab (Name Plate)
-
-
-
Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped
washers etc. complete.
0.02
189
9997.72
Providing & fixing ACP Sheets of various
thickness High Class ISI marked
complete in all respect as per the
directions of Engineer-in-charge
-
-
-
3mm thick ACP Sheet
4.74
10411
2196.55
Providing and applying Pre-Pigmented Coloured Cast Translucent Backlit Vinyl- Non custom colour
4.74
13544
2857.59
Cast Over laminate for cast printable media
4.74
6843
1443.85
Pylon at School of Eminence,Punjab (Phylon 8x4)
-
-
-
Cement concrete 1:5:10
-
-
-
With stone aggregate 40mm gauge
-
-
-
mixing by mechanical means using concrete mixer volumetric type
0.3
1081
3604.02
Reinforced cement concrete M-25
mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
1.27
7204
5673.1
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of
RCC including bending and binding placing in position complete
1.53
12051
7876.91
Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved)
including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped
washers etc. complete.
2.06
20585
9997.72
Designing, fabricating, testing, installing and fixing in position Curtain Wall with aluminum Composite Panel Cladding, with open grooves for linear as well as
curvilinear portions of the building , for all heights and all levels etc. including:
7.06
23138
3277.44
Graphics film - Graphic film applied on ACP should be high quality Cast vinyl of thickness not more than 60 Microns
without adhesive when measured using ASTM standard of measurements. The Adhesive of the film should be a Grey
colored pigmented adhesive and it shall stick, without the use of an activator such as solvents or heat on any metallic and painted, primed, polished and Clean surfaces free from any grease or silicone without producing wrinkles, rolling up, tearing or detaching. The adhesive of the film should be a pressure activated adhesive providing repositionability and has in built air release channels to provide a bubble free application. The liner of the Film should be a high-quality Paper liner which has a polyethylene coating on both sides to provide excellent lay flatness while converting. The Graphic film should not contain any Heavy metals in its construction and should be compliant with the limits of RoHS Directive 2002/95/EC and its Subsequent amendments. The Film should not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. The film should have fire retardant properties and should have a flame spread index of 5 or less and Smoke spread index of 0 when tested
as per ASTM E 84 standard of flammability testing. The film should also comply with ASTM E 162-94 flammability
standard and should have a Flame spread index of less than 1.90. The name of the manufacturer / brand should be clearly displayed on the liner.(Make:- 3M Ij180c or Avery Dennison MPI-1105)
7.06
17134
2426.93
Overlaminate - The graphic film must be protected using Matt finished high-performance cast over-laminate with not
more than 2mil thickness. Laminate must be designed for Flat and smooth application. It should also possess
Resistance to mild alkalis, mild acids and salt, additionally resists occasional fuel spills. This product qualifies Flame
Spread Index 15, smoke development index 10 as per product flammability test conducted by ASTM-E84 standard method. This product does not exceed the maximum concentration values (MCVs) for phthalates set under EU Directive 2011/65/EU(RoHS recast/RoHS 2), as amended by EU 2015/863, which applies to finished EEE after July 22, 2019 for Category 1-7, 10-11 products and after July 22, 2021 for Category 8 and 9 products. This means that each of the homogenous materials within this product does not exceed the MCV of 0.1% (by weight) for each of the following phthalates: DEHP, BBP, DBP and DIBP. (Make:- 3M 8520/AveryDennison DOL-1080)
7.06
10193
1443.85
Providing And Fixing Acrylic sheet at back of ACP Sheet including CNC cutting of letters in ACP Sheet
3.72
36084
9700.14
Providing And Fixing logo printed via UV Printing Three layer Printing with white Ink over Printable Cast Media Fixed on Acrylic sheet including Laser cutting of Acrylic Sheet and ACP Sheet
1.16
5644
4865.58
Electrical Charges
3.55
48379
13627.99
Construction of Waiting Hall at Principal Office
-
-
-
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
107.62
20635
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
10.76
47056
4373.24
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
19.37
112304
5797.85
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
4.3
25487
5927.37
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
17.23
115742
6717.5
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
43.63
267300
6126.54
12.5 mm thick cement plaster 1:4
305.2
61412
201.22
20mm thick cement plaster 1:4 in two coat work
130.25
36088
277.07
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
435.46
27982
64.26
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
305.2
44049
144.33
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
130.25
13721
105.35
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. 5mm Indian.
6.69
5440
813.3
Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation & taken only from outside the building plinth in 15 cm layers including ramming watering and consolidation lead upto 30 metres
27.97
12873
460.26
Base course of floor consisting of 100mm thick cement concrete 1:8:16. with sand filling 100mm thick
91.78
45438
495.08
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.). size 600 x 600 mm Rooms
91.78
137686
1500.18
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
113.06
89812
794.38
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
44.82
3209
71.61
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
5.17
40723
7876.91
Providing and fixing mineral fibre false ceiling tiles (NRC 0.55 to 0.6) at all heights of size 595X595x16 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k= 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24 x 24 x 3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
39.01
69083
1770.93
Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and tothe entire satisfaction of engineer-in- charge.
15.97
22224
1391.67
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973
-
-
-
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm Thick
9.76
23720
2430.42
Providing & Fixing decorative high
pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
19.52
22867
1171.49
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
4.55
532
116.94
Providing & fixing 6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
50
12536
250.73
Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's pecification, conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
10.67
5350
501.47
Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020- 1998,Drawings and to the entire satisfaction of engineer-in-charge.
4.55
13570
2982.46
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
5.13
3642
710.06
Providing and fixing 1st quality ceramic glazed wall tiles Matt/SemiMatt/Glosy/Highly Glossfinish/ Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
19.52
16389
839.64
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS Clamp U-PVC pipes (working pressure 4kgf. / sqcm) pipe 110 mm dia.
200
53096
265.48
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
10
1422
142.22
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
10
884
88.49
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
4
435
108.84
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
5
3803
760.73
Providing and fixing in position gratings 150mm x 150mm for gully trap.PVC grating
5
439
87.87
Construction of Sitting steps in Football Ground
-
-
-
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
56.83
10896
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
11.37
49723
4373.24
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
111.51
646518
5797.85
Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation & taken only from outside the building plinth in 15 cm layers including ramming watering and consolidation lead upto 30 metres
117.09
53891
460.26
20mm thick cement plaster 1:4 in two coat work
516.08
142990
277.07
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
516.08
33163
64.26
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
516.08
54369
105.35
New Construction of Double story Block
-
-
-
Dismantling of Reinforced cement concrete
51.09
118626
2321.91
Dismantling brick work tile, masonry or tile lining in Cement
73.79
53017
718.49
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
970.42
186068
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
99.67
435880
4373.24
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
198.66
1151800
5797.85
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
598.04
3544804
5927.37
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
897.06
198465
221.24
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
264.91
1779532
6717.5
Extra for R.C.C/PCC. work done in each subsequent storey above the first storey up to height of 4 metres or part thereof up to the roof top level of that storey.
42.14
8035
190.68
Centering and shuttering for columns (Square or rectangular or poly gonal in plain)
614.95
309024
502.52
Extra rate for shuttering in each subsequent storey above the first. Storey work done in subsequent storey above the first storey up to height of 4 metres or part thereof up to the roof top level of that storey.
8.89
93
10.54
Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
735.37
294390
400.33
Extra rate for shuttering in each subsequent storey above the first. Storey work done in subsequent storey above the first storey up to height of 4 metres or part thereof up to the roof top level of that storey.
23.07
243
10.54
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
775.41
434586
560.46
Centring and shuttering for stair cases with sloping with soffits including risers and stringers.
17.57
8255
469.86
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
3671.47
28919838
7876.91
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
294.2
1802428
6126.54
Extra rate for shuttering work done above 4 metres height (where any single storey exceeds 4 metres in height) for every additional height of 1 metres or part thereof.
125.85
19356
153.81
12.5 mm thick cement plaster 1:4
2279.18
458616
201.22
Extra for Plastering in each subsequent storey above the first storey upto 4 metre
above plinth level.
919.33
1939
2.11
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.
431.56
128212
297.09
20mm thick cement plaster 1:4 in two coat work
821.19
227527
277.07
Extra for Plastering in each subsequent storey above the first storey upto 4 metre
above plinth level.
461.62
974
2.11
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
3531.93
226961
64.26
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
2279.18
328954
144.33
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
821.19
86512
105.35
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
-
-
-
Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.
607.32
330661
544.46
Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitred and electrically flash-welded, with iron fittings incluidng necessary iron handles,hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire guage) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire guage and grill will be paid as per respective items)
48.19
7035
145.99
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.
132.76
83637
629.99
Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.
132.76
126715
954.47
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973
-
-
-
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm Thick
105.48
256360
2430.42
Providing & Fixing decorative high pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
210.97
247149
1171.49
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
105.48
12334
116.94
Providing & fixing 6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
100
25073
250.73
Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's pecification, conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
117.76
59053
501.47
Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020- 1998,Drawings and to the entire satisfaction of engineer-in-charge.
24.07
71787
2982.46
Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation & taken only from outside the building plinth in 15 cm layers including ramming watering and consolidation. From excavated soil relaying
388.17
25762
66.37
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
1255.05
621350
495.08
Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type
95.61
520637
5445.43
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.). size 600 x 600 mm Rooms
787.57
1181496
1500.18
Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm.
787.57
102880
130.63
Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with
-
-
-
Udaipur Green Marble Tiles of thickness 18mm to 20mm using Slabs sizes above 0.50 sqm
251.07
317269
1263.67
Extra labour for projected nosing of stair case of any shape and design.
43.9
2959
67.42
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
77.17
54795
710.06
Providing and fixing 1st quality ceramic glazed wall tiles Matt/SemiMatt/Glosy/Highly Glossfinish/ Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
374.81
314705
839.64
Structural steel work in angles, tees and flats, riveted or welded including cutting fixing all gusset plates, bolts, nuts, rivets, welding rod, etc. with hoisting and erecting in position :-
-
-
-
For roof trusses, well curbs, plates and trussed girders, etc. of any span for buildings and bridges more than 15 m up to 30 m span.
289.05
2813881
9734.93
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.60 mm (+ 0.05 %) thick
627.53
419798
668.97
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS Clamp U-PVC pipes (working pressure 4kgf. / sqcm) pipe 110 mm dia.
500
132740
265.48
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
UPVC 110 mm bend
50
7111
142.22
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
50
4424
88.49
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
10
1088
108.84
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
10
7607
760.73
Providing and fixing in position gratings 150mm x 150mm for gully trap.PVC grating
50
4393
87.87
Providing and Fixing Roller Blinds of approved quality by Engineer in Incharge
1368
363176
265.48
Plinth Protection work
-
-
-
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
12.96
2484
191.74
Cement Concrete 1:8:16 with 40mm guage stone aggregate using mechanical mixer.
2.16
8377
3878.27
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
10.8
62616
5797.85
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
37.8
18714
495.08
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
37.8
12892
341.08
12.5 mm thick cement plaster 1:4
66.15
13310
201.22
Construction of Proposed Toilets 4 Nos
-
-
-
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
622.12
119285
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
62.2
272015
4373.24
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
83.64
484932
5797.85
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
38.84
230219
5927.37
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
64.36
432338
6717.5
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
200.56
1228738
6126.54
12.5 mm thick cement plaster 1:4
1507.16
303270
201.22
20mm thick cement plaster 1:4 in two coat work
893.84
247656
277.07
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
2401
154288
64.26
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
1507.16
217528
144.33
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
893.84
94166
105.35
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
-
-
-
Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.
108.04
58407
540.61
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. 5mm Indian.
10.92
8881
813.3
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973
-
-
-
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm Thick
23.44
56969
2430.42
Providing & Fixing decorative high pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
46.84
54872
1171.49
Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's pecification, conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
201.22
100905
501.47
Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020- 1998,Drawings and to the entire satisfaction of engineer-in-charge.
65.04
193979
2982.46
Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation & taken only from outside the building plinth in 15 cm layers including ramming watering and consolidation lead upto 30 metres
105.6
48603
460.26
Base course of floor consisting of 100mm thick cement concrete 1:8:16. with sand filling 100mm thick
231.04
114383
495.08
Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with
-
-
-
Udaipur Green Marble Tiles of thickness 18mm to 20mm using Slabs sizes above 0.50 sqm
95.48
120655
1263.67
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
255.04
181093
710.06
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
-
-
-
Size 1500mmx600mm or any other size
20
58300
2915.03
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
23.18
182586
7876.91
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
337.76
268309
794.38
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
147.05
10530
71.61
Construction of Enterance Ramp (Plinth Height 300mm) Type-IV
-
-
-
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
13.6
2607
191.74
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
2.28
8842
3878.27
Cement Concrete 1:2:4 with stone ballast or shingle.using concrete mixing volumetric type
0.32
1742
5445.43
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
8.84
51252
5797.85
12.5mm thick cement plaster 1:4.
2.42
486
201.22
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
21.81
10797
495.08
Providing and Laying Out Door Precast Designer chequered tiles of size 300*300 mm & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3(1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
21.81
23617
1082.87
Providing & fixing 16 gauge stainless steel pipe of top of various size railing of grade 304 duly fixed on ramp with the help of bolts grouted on floor with hand rail and newel post of 50mm dia Stainless steel pipe , Balusters of 40mm dia Stainless steel pipe complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge. (Railing on Enterance Ramp Design as per guidelines issued for persons with disability)
25.6
12972
506.73
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
2.42
254
105.35
Construction of New Attached Toilet for Principal Office
-
-
-
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
14.44
2768
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
1.44
6297
4373.24
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
4.95
28699
5797.85
Reinforced cement concrete M-20
mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
0.72
4267
5927.37
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
1.53
10277
6717.5
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
6.86
42028
6126.54
12.5 mm thick cement plaster 1:4
36.52
7348
201.22
20mm thick cement plaster 1:4 in two coat work
36.34
10068
277.07
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
72.86
4681
64.26
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
36.52
5270
144.33
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
36.34
3828
105.35
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. 5mm Indian.
0.42
341
813.3
Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's pecification, conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
5.2
2607
501.47
Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020- 1998,Drawings and to the entire satisfaction of engineer-in-charge.
0.48
1431
2982.46
Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation & taken only from outside the building plinth in 15 cm layers including ramming watering and consolidation lead upto 30 metres
1.98
911
460.26
Base course of floor consisting of 100mm thick cement concrete 1:8:16. with sand filling 100mm thick
6.51
3222
495.08
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
6.51
4622
710.06
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
-
-
-
Size 1500mmx600mm or any other size
2
5830
2915.03
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
6.5
5162
794.26
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
12.8
916
71.61
MULTIPURPOSE HALL
-
-
-
Earth work in excavation in foundations trenchesetc. in all kinds of soil where Pick-Jumper work isnot involved and not exceeding 2.0 metres depth including dressing of bottom and sides oftrenches, stacking the excavated soil clear fromthe edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed
within lead of 30 metres.
794.77
152389
191.74
Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
86.15
376754
4373.24
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
192.55
1141315
5927.37
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth
215.06
1246885
5797.85
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
471.69
104356
221.24
Centering and shuttering for columns (Square or rectangular or poly gonal in plain)
738.74
371231
502.52
Damp proof course 7.5 Cm thick cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded
82.41
49577
601.59
12.5mm thick cement Plaster 1:4
37.35
7507
201
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres relaying of earth
232.32
106927
460.26
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres relaying of earth
195.63
12983
66.37
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
233.7
1431772
6126.54
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
120.43
737819
6126.54
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
97.07
594703
6126.54
Extra rate for shuttering work done above 4 metres height (where any single storey exceeds 4 metres in height) for every additional height of 1 metres or part thereof.
97.07
14930
153.81
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
91.59
561129
6126.54
Extra for 115mm/100mm thick walls for additional storey upto 4 meters above the top of structural roof of lower storey for Brick Work/ Concrete Block/ Clay Block.
300.66
4750
15.8
Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels
323.14
129362
400.33
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
1133.64
635359
560.46
Centring and shuttering for parapet, fascias and other similar items including edges.
39.01
21370
547.82
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure
280.72
1885736
6717.5
12.5 mm thick cement plaster 1:4
885.78
178041
201
12.5 mm thick cement plaster 1:4
3330
670062
201.22
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
3330
280652
84.28
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
3330
312220
93.76
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
885.78
128774
145.38
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
465.51
3666780
7876.91
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
408.81
324750
794.38
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
98.45
7049
71.6
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material
1577.39
780934
495.08
Screed of 40mm thick cement concrete 1:8:16 with stone aggregete to be laid below the topping using mechanical mixer for mixing of material
821.64
153170
186.42
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
258.87
217357
839.64
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
55.58
39465
710.06
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
-
-
-
(a)Size 600x600 mm
2157.2
3236188
1500.18
Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with
-
-
-
Udaipur Green Marble Tiles of thickness 18mm to 20mm using Slabs sizes above 0.50 sqm
204.67
258635
1263.67
Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
(a) 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
7.27
9183
1263.19
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
-
-
-
12 mm thick micro tegular edged semi perforated GFRG (Glass Fibre Reinforced Gypsum) false celing tiles of Size 595x595 mm
1145.53
1671442
1459.1
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
415.28
4484504
10798.75
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
-
-
-
0.60 mm (+ 0.05 %) thick
1243.02
831543
668.97
Providing and fixing Gutter 250mm wide with PPGL 0.50 thick (TCT) manufactured from zinc / aluminium alloy coated high tensile steel, having minimum yield strength of 550 MPa of approved colour fixed by means of self-drilling screws limped washers as per the manufactures guidelines complete in all respect and to the entire
satisfaction of engineer in charge
166.57
284701
1709.2
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
1180.3
82066
69.53
providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with Rubber mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.
2322.5
1615020
695.38
JOINERY FITTINGS
-
-
-
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
-
-
-
Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.
170.54
84262
494.09
Doors and windows frame of size 161mm x 60mm with 40 mm wide double rebate weighing 4.05 kg per meter.
448.78
255306
568.89
Factory manufactured Solid flush door fixed in position iron hinges, etc
(excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1) 1999
-
-
-
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-
97.29
236456
2430.43
Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flash-welded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:-Glazing, wire gauge and grill will be paid as per respective items)
3612
487078
134.85
Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect
-
-
-
8.0mm thick Plate glass(weight not less than 20 kg/ sqm)
104.71
116709
1114.6
Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.
34.49
32919
954.47
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)
542.64
63456
116.94
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c)I.S.I Designation No. III (size of door 851mm to 1000mm)
36
49683
1380.09
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete.
36
13008
361.35
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
550.63
16243
29.5
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
550.63
38285
69.53
Providing & fixing 12 stainless steel handles ISI marked on door & window frames complete in a respect as per the direction of Engineer-in-charge.
30
8817
293.93
NSTALLATION OF SANITARY FITTINGS
-
-
-
Providing, Laying, fixing & jointing of P.V.C. Pipes as per 1S- 4985 (ISI marked with the prior approval of Engineer-in- Charge along the Trenches and laying the same n Trenches to correct alignment and gradients, utting jOinting and testing complete as per specifications
-
-
-
75mm o/d PVC pipe of 6kgf/sqcm
76.2
10709
140.55
110mm o/d PVC pipe of 6kgf/sqcm
45.72
9528
208.41
160mm o/d PVC pipe of 6kgf/sqcm
91.44
53271
582.58
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer- in- Charge)having thermal stability for hot & old water supply, includingall CPVC plain & brass threaded fittings ile fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge
-
-
-
16mm o/d
91.44
17216
188.28
20mm o/d
76.2
17769
233.19
25mm o/d
60.96
18351
301.04
32mm o/d
121.92
49113
402.83
Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
11
152956
13905.15
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
9
49275
5475.04
Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
9
19057
2117.54
Providing and fixing jet spray with 2'-6" long PVC pipe.
11
5516
501.47
Providing and fixing in position paper holders of approved make (to the approval of Engineer- in- charge) fixed in to wall with C.P brass screws complete in all respect
11
12561
1141.99
Providing and fixing in position towel rails/ ring of approved make (to the approval of Engineer-in- charge fixed in with rawl plugs embedded in walls with brass screws complete in ll respect.
9
14592
1621.34
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in
9
7992
888.1
Providing & Fixing in position 5mm m thick beveled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers a complete in all respect (as required by yd the Engineer-in- Charge)
9
26235
2915.04
Providing & Fixing in position C.P/Aluminium Khunti of approved make (to the approval of Engineer- in-charge) fixed into wall with CR. brass screws and rawl plugs etc. complete in all respect.
9
6058
673.19
Providing & Fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect.
18
21864
1214.69
Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
11
7363
669.37
Providing & fixing in position best Indian make PVC flexible tube connection.
20
3834
191.74
Providing and fixing PVC 32mm waste pipe upto floor level and plumber joint.
9
1071
119.05
Providing & Fixing in position CP. Brass extension piece 25mm long to 50mm long of approved make approval of Engineer-I various fixtures complete in all
respect.
50
5636
112.73
Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in- charge) under various fixtures complete in all respect
80
5309
66.37
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint onforming to I.S.I complete as per standard design.
20
209246
10462.31
Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick C.C 1:6:12 in foundation, first class brick work laid in cement sand mortar 1:5, 40mm hick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12.50mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement 1mm thick left absolutely smooth polished and correct to template including cost of precasted RCC road gully grating and frame including paint with coal tar (as specified in item No. 29.74)complete and to the equirement of the
10
63009
6300.98
Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item)
91.44
22348
244.41
Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
10
1422
142.22
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
10
1000
100.08
Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3
10
7132
713.22
Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.
Inside size 120x180 cm and 120 cm deep
5
159974
31994.8
Public Health
-
-
-
New Work for New Toilet Blocks
-
-
-
Providing and fixing 1st quality ceramic glazed wall tiles Matt/ Semi Matt/ Glosy/ Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
1161.16
1043464
898.64
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS:4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand)
365.09
421930
1155.69
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
57
287036
5035.73
Providing and fixing in position set of EWC and WHB size 46x36 cm for Handicapped person of approved make (to the approval of the Engineer-in-charge) consisting of matching cistern, one pair mountingbrackets, seat cover, one no. hinges rail 76cm and 4 no. grab rails 60cm complete in all respect and to the entire satisfaction of Engineer-in-charge.
6
404370
67395
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect.
-
-
-
Size 560mm x 450mm (Under counter oval)
44
124692
2833.92
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect
-
-
-
C.P.brass 15mm Angle valve without flange
112
97461
870.19
C.P.brass 15mm Concealed stop cock with flange.
57
72299
1268.41
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect
-
-
-
PVC tube connection of size 15 mm x 600 mm with C.P. Brass nut
112
23126
206.49
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.
120
13989
116.58
Providing and fixing in position 5 mm thick bevelled edge miror of superior glass (of approved make) complete with 4 mm thick hard board backing fixed in with rawl plugs 50mm, C.P brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-charge)
-
-
-
Size 550mm x 400mm
44
51731
1175.71
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer -in- charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
44
39076
888.1
Providing & fixing in position C.P brass Sink
mixer swivel spout (Wall mounted) of
approved make (to the approval of Engineerin-charge) complete in all respect.
44
137161
3117.31
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer -in- charge) complete in all respect.
-
-
-
C.P. brass Bib cock foam flow without flange
69
66658
966.06
Providing and fixing Exhaust Fan
28
42000
1500
Providing and fixing jet spray with 2'-6" long PVC pipe.
-
-
-
With C.P. Brass nut
59
29586
501.47
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
-
-
-
Triple Layer Tanks
26000
295880
11.38
Water tank plateform
13
102518
7886
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25 mm i/d
13
2584
198.82
G.I. tank nipple 40 mm i/d
13
4902
377.1
Providing and fixing in position automatic brass Ball Cock in tanks.
-
-
-
Brass Ball Cock with rod and Plastic Ball
-
-
-
25mm i/d
13
12362
950.98
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
-
-
-
25mm i/d G.I. Union
13
2607
200.57
40mm i/d G.I. Union
13
4460
343.08
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
25mm i/d Brass Ball valves
9
4995
555.02
40mm i/d Brass Ball valves
7
7712
1101.81
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
SDR 11 CPVC pipes & fittings 20mm o/d
263
61331
233.2
CPVC SDR 11 Pipe & fitting 25mm o/d
85
25588
301.04
CPVC SDR 11 Pipe & fitting 40mm o/d
75
39922
532.3
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS-14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm o/d pipes
-
-
-
Single Tee With Door
43
10161
236.32
Elbow 90 Degree (All side socketed)
89
14468
162.57
Vent Cowls
57
2587
45.4
Coupler
197
21884
111.09
P Trap/ Floor Trap 110mm x 75mm
121
37508
309.99
For 75mm o/d pipes
-
-
-
Single Tee With Door
16
2545
159.11
Elbow 90 Degree (All side socketed)
30
2241
74.71
Vent Cowls
11
345
31.43
Coupler
76
5677
74.71
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
-
-
-
Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
595
235715
396.16
75mm o/d SWR UPVC pipe lines laid complete
230
70568
306.82
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge )
-
-
-
110mm o/d
386
39090
101.27
75mm o/d
133
11197
84.19
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
149
32359
217.18
M.S. Holder bats clamps for 75mm i/d H.C.I. pipes
57
11561
202.84
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
Through wall 11.43 cm thick
100
17642
176.42
Through wall 22.86 cm thick
100
25171
251.71
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect.
-
-
-
C.P. Brass extension piece, 25mm long to 50mm long
280
31561
112.72
Base course of floor consisting of 100mm thick
cement concrete 1:8:16 and 100mm sand filling
using mechanical mixer for mixing of material
403
171101
424.57
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
-
-
-
160mm o/d pipe
220
275745
1253.39
250mm o/d pipe
300
903840
3012.8
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
52
6190
119.05
Providing and Fixing FMD Door Sintex make complete with chowkhat and Aluminium fitting complete in all respects.
-
-
-
Size 2'-6" x 7'-0"
62
403000
6500
Size 3'-0" x 7'-0"
16
128000
8000
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
150mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
29
56365
1943.64
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 (150mm thick) in foundation, cement concrete 1:2:4 benching 12.50 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement, R.C.C. 1:2:4 slabs 100 mm thick cement concrete topping 50 mm thick with 455mm x 455 mm, 455 mm x 610 mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
450 mm x 600 mm inside with 455 mm x 610 mm cover and frame light duty double seal
23
278771
12120.5
Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect
11
34614
3146.8
Vitreous white Chinaware Partition
-
-
-
Small partitions size 69 x 16.5 x 32.5 cm
8
19249
2406.19
Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with fittings for urinals complete.
11
5064
460.38
Constructing brick masonry manhole in cement mortar 1:5 (1 cement : 5 coarse sand) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @80.00 kg/per cum, foundation concrete 1:4:8
mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.
-
-
-
Inside size 90x150 cm and 120 cm deep
13
311557
23965.99
Extra payable for every 0.30 m additional depth of manhole chamber in item 29.55 upto 1.80 m increase in depth.
-
-
-
Inside size 90x150 cm (Each depth of 0.30 m)
26
71107
2734.9
Excavation of trenches in a Streets, Lanes or in Open Area for Storm Sewers and Manholes to Full Depths as Shown in Drawings,excluding Shoring, Timbering of Poling Board Frame System Type, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines.night signals, profiles, Pegs, Sight rails, boning rods, crossing over trenches for access to the houses, watching, fencing etc., fixing and maintenance of caution boards, refilling trenches, watering of refill in 15 cm layers, ramming and restoration of surface to original conditions and removal of Surplus Spoil from the Site of Works, for all Works other than connections to Ventilating Shafts upto a Lead of 15 mtr
-
-
-
For depth not exceeding 2 m. below Ground level
-
-
-
All classes of soil except rocky
100
23598
235.98
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge) including carriage complete in all respect.
-
-
-
Water Cooler Full Steel Body 150/150 ltr without Stablizer
2
93698
46849.15
Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge) including carriage and fixing in position complete in all respect.
2
80453
40226.85
Providing and fixing mineral fibre false ceiling tiles (NRC 0.55 to 0.6) at all heights of size 595X595x16 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k= 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24 x 24 x 3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
50
88546
1770.93
Waterproofing of wet areas (Concrete/ Masonary Surface) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating (DR. FIXIT FASTFLEX / Equivalent) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects.
50
26575
531.5
Providing and laying Polished Granite stone 18mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
14.12
41844
2963.5
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and Shuttering insuperstructure.
11
68395
6217.76
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
10
78769
7876.91
Centering and shuttering for flat surfaces such assuspended floors, roofs, landings, chajjas, shelves etc.
150
84069
560.46
Cement concrete 1:4:8 (to cover the SN-8 Pipe)
-
-
-
with stone ballast 20mm gauge
-
-
-
mixing by mechanical means using concrete mixer volumetric type
30
114726
3824.21
Sand Filling in Foundation Trenches as per Drawing & Technical Specification
30
36482
1216.08
Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
354
38784
109.56
Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
65
7395
113.78
Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.
-
-
-
Eurpoean/Indian/Orissa W.C.
21
4845
230.72
PVC / China Ware Cistern
21
3628
172.77
Wash Hand Basin / Urinal Pot
14
1607
114.83
CP Bib Cock/ Angle Cock/ Stop Cock/ Shower/ Bottle Trap
50
1264
25.28
Providing and fixing 1st quality ceramic glazed wall tiles Matt/ Semi Matt/ Glosy/ Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
354
318115
898.63
Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS:4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand)
65
75119
1155.69
Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.
17
95332
5607.78
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
5
25178
5035.73
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
Size 550 mm x 400 mm x 815 mm
14
53302
3807.35
Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
-
-
-
Vitreous chinaware standard white pedestal for wash hand basin.
14
29645
2117.54
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect
-
-
-
C.P.brass 15mm Angle valve without flange
35
30456
870.19
C.P.brass 15mm Concealed stop cock with flange.
2
2536
1268.41
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect
-
-
-
PVC tube connection of size 15 mm x 600 mm with C.P. Brass nut
35
7227
206.49
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.
41
4779
116.58
Providing and fixing in position 5 mm thick bevelled edge miror of superior glass (of approved make) complete with 4 mm thick hard board backing fixed in with rawl plugs 50mm, C.P brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-charge)
-
-
-
Size 550mm x 400mm
8
9405
1175.71
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer -in- charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
12
10657
888.1
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
C.P. brass towel Rails size 15mm dia 610mm long
4
6485
1621.34
C.P brass towel ring
13
12476
959.74
Providing and fixing in position C.P. brass Tumbler Holder of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
2
1639
819.62
Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer -in-charge) fixed in with rawl plugs and C.P brass screws complete in all respect.
-
-
-
CP brass Acrylic Shelf size 560mmx130mm
1
1758
1758.29
Providing & fixing in position C.P brass Sink
mixer swivel spout (Wall mounted) of
approved make (to the approval of Engineerin-charge) complete in all respect.
14
43642
3117.31
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer -in- charge) complete in all respect.
-
-
-
C.P. brass Bib cock foam flow without flange
44
42506
966.06
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
-
-
-
Triple Layer Tanks
6000
68280
11.38
Water tank plateform
9
70974
7886
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
G.I. tank nipple 25 mm i/d
9
1789
198.82
Providing and fixing in position automatic brass Ball Cock in tanks.
-
-
-
Brass Ball Cock with rod and Plastic Ball
-
-
-
25mm i/d
9
8558
950.98
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
-
-
-
25mm i/d G.I. Union
9
1805
200.57
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
25mm i/d Brass Ball valves
9
4995
555.02
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
SDR 11 CPVC pipes & fittings 20mm o/d
470
109599
233.19
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS-14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
For 110mm o/d pipes
-
-
-
P Trap/ Floor Trap 110mm x 75mm
41
12709
309.99
Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications for more than 3 mtr street width (Mechenically)
-
-
-
PVC pipe 90mm o/d
200
76600
383
Prov. Jointing of existing 90 mm o/d PVC Pipe with new proposed PVC pipe complete in all respect
2
4426
2213
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
19
2261
119.05
Providing and Fixing FMD Door Sintex make complete with chowkhat and Aluminium fitting complete in all respects.
-
-
-
Size 2'-6" x 7'-0"
25
162500
6500
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
150mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
12
23323
1943.64
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 (150mm thick) in foundation, cement concrete 1:2:4 benching 12.50 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement, R.C.C. 1:2:4 slabs 100 mm thick cement concrete topping 50 mm thick with 455mm x 455 mm, 455 mm x 610 mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
450 mm x 600 mm inside with 455 mm x 610 mm cover and frame light duty double seal
3
36361
12120.52
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge) including carriage complete in all respect.
-
-
-
Water Cooler Full Steel Body 150/150 ltr without Stablizer
2
93698
46849.15
Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge) including carriage and fixing in position complete in all respect.
2
80453
40226.84
Providing and fixing in position CP Brass Grab Bar of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.
3
5284
1761.45
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect.
-
-
-
C.P. Brass extension piece, 25mm long to 50mm long
30
3381
112.72
Providing, fixing and jointing ISI Marked Gun Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
-
-
-
25mm i/d Gun Metal peet valve heavy pattern
2
1628
814.32
Disilting of manhole including all safety measures, cost of container T & P and disposal of silt upto 5km complete in all respects
-
-
-
Depth above 3 m.
2
4831
2415.68
Repair of Existed Manhole
-
-
-
12.5 mm thick cement plaster 1:3
121
25367
209.65
Reinforced cement concrete M-25 mechanically batch mixed using batch typeconcrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
3
17019
5673.1
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
3
23630
7876.91
Providing and fixing RCC manhole covers only
-
-
-
500mm i/d RCC man hole cover only as per ISI
-
-
-
Heavy duty
4
4454
1113.55
Foot Rest for Manhole.
-
-
-
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes
with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.
60
13210
220.18
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
-
-
-
Single Socket Type B
-
-
-
110mm o/d SWR UPVC pipe lines laid complete
160
63385
396.16
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)
-
-
-
80 mm i/d
1
4430
4430.64
Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department With each of Size 0.6m x 0.6m
1
5589
5589.83
Providing Jointing of Existing 90 mm PVC Pipe with new proposed PVC Pipe complete in all respect.
4
8852
2213
Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all restect
3
11397
3799
Providing, fixing and jointing ISI Marked GunMetal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. SAFETY VALVE
-
-
-
25mm i/d Gun Metal peet valve heavy pattern.
4
3256
814
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
-
-
-
25 mm dia
24
7536
314
50 mm dia
30
20700
690
65 mm dia
50
43000
860
80 mm dia
50
52300
1046
100mm dia
500
759000
1518
150mm dia
200
440400
2202
200mm dia
12
40032
3336
Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per
specifications.
-
-
-
80 mm dia
5
13515
2703
100 mm dia
10
34310
3431
150 mm dia
5
27280
5456
200 mm dia
2
18814
9407
Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra
-
-
-
Class PN-1.0 as per ISI with rubber Flap
-
-
-
80 mm dia
3
12060
4020
100 mm dia
10
51600
5160
150 mm dia
5
43930
8786
Providing and fixing S.S Pressure Gauge complete as required complete in all respect.
-
-
-
Dial diameter 100mm calibration 0-16 Kg
10
8100
810
Supplying, Installation, Testing and Commissioning of G.M Single headed hydrantvalve with instantaneous Gun metal peet coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (TypeA) with blank Gunmetal Cap and chain including orifice plate made of 6mm th Stainless steelto keep the pressure not more than 3.5 per sqcm at any point complete in all respects.
22
149270
6785
Supplying, Installation, Testing and Commissioning 63 mm dia gun-metal Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Gun metal nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.
22
45034
2047
Supplying, Installation, Testing and Commissioning of Non-percolating flexible CP HOSE as per IS:8423 / 1994 ISI marked 63mm dia x 15 m long complete with instantaneous type gun-metal 63 mm dia male & female coupling (IS: 903) bound and riveted to hose pipes.
22
92334
4197
Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 meter long type2, hose reel Drum with bracket as per IS:884, 20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with main pipe complete in all respect.
22
209704
9532
Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved
shade and quality, sign writing etc.
-
-
-
900 mm wide x 600 mm high x 500 mm deep Size (for Yard Hydrant)
22
121924
5542
Providing and fixing fire brigade inlet connection of cast iron body with Gun metal 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904. (to be connected to static tank).
-
-
-
Two Way inlet connection
1
6573
6573
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
25mm i/d Brass Ball valves
30
16650
555
Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
-
-
-
4.5 Kg. Capacity
15
107250
7150
Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure) as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect
-
-
-
6 Kg. Capacity
50
147000
2940
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of ngineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
-
-
-
Triple Layer Tanks
5000 x 4 = 20000 ltr
20000
228000
11.4
Construction of Water tank Platform/Foundation
4
50000
12500
Kirloskar make KBL BRANDED PUMPSET MODEL KFE-E1808R-M86 in back pull out design having 125 mm suction, 100 mm delivery CI casing, bronze impeller, CS shaft with gland packing/MS arrangement coupled on common MS fabricated base frame to vertical water cooled diesel engine complete with 12 V battery start arrangement, air cleaner, exhaust silencer (without piping), fuel filter, developing 40 bhp at 1800 RPM. Engine with twin belt driven radiator and complete with engine starting panel.
The pump set is suitable for following duties: Total head : 60 m Flow : 1620 lpm
1
430700
430700
Service of Fire Engine pump
-
-
-
Extra Price (Each 1 no. 12 V 150 AH Exide/Eq battery with leads)
1
17346
17346
Engine Oil - Kirloskar K Oil Super
1
7788
7788
Coolant - Kirloskar K Cool Super Plus -50-50 Premix
1
5428
5428
Diesel tank - 40 Ltr. Capacity
1
8260
8260
Main pumps Kirloskar make pump model DB 80/26 in back pull out design (end suction type) having 100 mm suction, 80 mm delivery, CI casing, bronze impeller and CS shaft with gland packing arrangement coupled on common base-plate to Kirloskar/ABB/CGL or equivalent (at our option) make 40 HP, 2900 RPM TEFC sq. cage induction motor suitable for 3 phase, 415V, 50 Hz AC supply confirming to through suitable flexible coupling. The pump set is suitable for following duties:Total head : 60 m Flow : 1620 lpm ( 137 cubm/hr)
1
241900
241900
jokey pumps Kirloskar make pump model DB 32/26 in back pull out design (end suction type) having 50 mm suction, 32 mm delivery, CI casing, bronze impeller and CS shaft with gland packing arrangement coupled on common base-plate to Kirloskar/ABB/CGL or equivalent (at our option) make 10 HP, 2900 RPM TEFC sq. cage induction motor suitable for 3 phase, 415V, 50 Hz AC supply confirming to through suitable flexible coupling. The pump set is suitable for following duties:
Total head : 60 m
Flow : 180 lpm ( 10.8 cubm/hr)
1
120360
120360
Providing and fixing Air cushion tank 200 mm dia. x 1.5 M high with dished top, made of minimum 6 mm thick M.S. pipe/plate complete with 25 mm dia. Brass Safety Valve (Ball valve, pressure guage type), 25 mm dia. Stop with brass stop cock,nipple, tees, elbow and all accessories as required incl. fixing brackets.
4
61360
15340
Supply, Installation, Testing & Commissioning of cubical type floor mounted Fire Pump Control Panel fabricated from 14 g M.S. Sheet duly powder coated finish of approved shade and comprising of :SITC of the AUTOMISATION CONTROL PANEL consist of a control cubicle of fabricated sheet steel suitable for floor mount and for 3 phase, 4 wire , 50 hz system incorporating suitable isolating main switches, bus bars, relays, contactors, indication lamps, fuses , instruments automatic isolator and auxillary switch including connectors complete as required for 40 HP main electric pump, 1 jockey pump 10 HP and charginf system for battery and operation of Engine driven pumpset as
1
135700
135700
Supply and installtion of 25 mm dia air release valve complete (bound brand )
5
10770
2154
Wrapping/Coating in underground pipe Pump room Providing steel supports, jointing and testing of Mild Steel Black Pipe Heavy class (IS: 1239 Part-1) heavy class including cutting, welding/screwing etc. and providing all fttings viz. Flanges. Bends,Tees, Elbow, Reducers, Clamps. Hangers etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same to the approval of engineer/consultant complete including painting with one coat of primer and two or more coats of enamel paint of approved make and shade including steel work. jidal hissar isi brand
700
247800
354
paint work Providing main ring line laying on steel supports, jointing and testing of Mild Steel Black Pipe c class (IS: 1239 Part-1) heavy class including painting with one coat of primer and two or more coats of enamel paint of approved make and shade including steel work. jindal ISI brand
1
47200
47200
Providing and fixing M.S. sport structural work fabricated from standard section e.g. M.S angles, channels, plates including cutting to size, drilling, welding fixing and welding to insert plates in RCC structural members or through dash fasteners as per site conditions as directed by Engineer-in-charge including cutting and making good the walls, ceilings and floors (for pipe supports, clamps etc.)
300
31800
106
Providing and fixing Hardware (Anchor Fastener, Nut Bolts) drilling, to insert plates in RCC structural members or through dash fasteners as per site conditions as directed by Engineer-in-charge including cutting and making good the walls, ceilings and floors (for pipe supports, clamps etc.)
1
29500
29500
Providing and fixing fire hose reel fitting hydrolic pipe tested to 20 Kg/cm2 (I.S:778-1971, Class - II) of approved quality 25 mm dia
22
29854
1357
Providing Manually operated Fire Alarm/ Hooter Complete in all respect.
20
60000
3000
Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested, equipment as required such as hand boring machine and its accesssory, transportation to site and vice versa etc. complete in all respect.
(for 2 No. Bore Holes)
-
-
-
Boring with 200mm id Housing Pipe
-
-
-
Upto 150mtr. Depth BGL
70
66817
954.53
Providing, laying, fixing & jointing of P.V.C pipes as per ISI-4985 (ISI marked with the prior approval of Engineer- in-charge) along the trenches and laying the same in trenches to corect alignment and gradients, cutting, jointing and testing complete as per specifications.
(for 2 No. Bore Holes)
-
-
-
(160 mm ) o/d pipe of 6kg. /sqcm
68
62591
920.46
Supplying, assembling, lowering and fixing in vertical position in bore well PVC pipes as per ISI-4985 (ISI marked medium well screen pipes with ribs, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
(for 2 No. Bore Holes)
-
-
-
(160 mm ) o/d pipe of 6kg. /sqcm
2
1840
920.46
Supply & fixing of end cap having thread to fix on housing pipe complete in all respects.
(for 2 No. Bore Holes)
-
-
-
150mm internal diameter
2
500
250
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. (for 2 No. Bore Holes)
-
-
-
For 160mm o/d pipes
-
-
-
Vent Cowl
2
142
71.36
Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. With 3D excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/ structures including watering dressing and disposal of surplus soils as directed upto 15 meter complete in all respect.
(for 2 No. Recharge Wells)
-
-
-
Depth upto 1.5 Mtr. BGL
-
-
-
For all kinds of soil except of rocky
-
-
-
3.14 x 4.50 x 4.50 x 1.50 = 23.84 Cum 4
23.84 x 2 = 47.68 Cum
47.68
4169
87.44
Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. (for 2 No. Recharge Wells)
-
-
-
3.14 x 4.50 x 4.50 x 1.90 = 30.20 Cum 4
30.20 x 2 = 60.40 Cum
60.4
2163
35.82
Cement concrete 1:8:16 with 40mm gauge stone aggregate (for 2 No. Recharge Wells)
1.2
3811
3176.3
3.14x(4.08*4.08-3.0*3.0)x0.15=0.90cum 4
0.90 x 2 = 1.20 Cum
-
-
-
First class burnt work laid in cement sand mortar 1:7 in foundation and plinth (for 2 No. Recharge Wells)
19.24
99035
5147.4
1st Step
3.14x(3.93*3.93-3.0*3.0)x0.50 =2.53 4
2nd Step
3.14x(3.70*3.70-3.0*3.0)x0.50 =1.84 4
3rd Step
3.14x(3.46*3.46-3.0*3.0)x2.25 =5.25 4
2.53 + 1.84 + 5.25= 9.62 Cum
9.62 x 2 = 19.24 Cum
-
-
-
12.5 mm thick cement plaster 1:3
(for 2 No. Recharge Wells)
45.92
9627
209.65
3.14 x (3.0*3.0) x 3.25 = 22.96cum 4
22.96 x 2 = 45.92 Sqm
-
-
-
Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :-
-
-
-
Top Layer :- Fine sand, screened, cleaned and washed and graded from (Effective size 0.2 to 0.4mm with uniformity coefficient 2 to 3) from Pathankot or other approved source (for 2 No. Recharge Wells)
Size 0.2-0.4mm =3.14/4x3.00 x 3.00 x 0.5=3.53 Cum
3.53 x 2 = 7.06 Cum
7.06
12414
1758.38
Second Layer :- Coarse Sand screened, cleaned and washed and graded from 3mm to 6mm (from Pathankot or approved equivalent quarry) (for 2 No. Recharge Wells)
Size 3-6mm =3.14/4 x 3.00 x 3.00 x 0.5=3.53 Cum
3.53 x 2 = 7.06 Cum
7.06
10397
1472.8
Third Layer :- Bajri screened, cleaned and washed and graded from 6mm to 20mm (from Pathankot or approved equivalent quarry) (for 2 No. Recharge Wells)
Size 6-20mm =3.14/4 x 3.00 x 3.00 x 0.5=3.53 Cum
3.53 x 2 = 7.06 Cum
7.06
9706
1374.91
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design. (for 2 No. Recharge Wells)
7 x 2 = 14 No.
14
3082
220.18
Providing and Fixing G.I corugated openable shutter 2 No. duly fixed with 50x50x5 thick MS angle section frame. (for 2 No. Recharge Wells)
2
16000
8000
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation
1 x 1.305 x 1.26 x 1.65 = 2.71 Cum
(for 2 No. Desilting Chambers)
2.71 x 2 = 5.42 Cum
5.42
1039
191.74
Cement concrete 1:8:16 with (40mm) gauge stone aggregate to be used instead of brick ballast 1 x 1.305 x 1.26 x 0.075 = 0.12 Cum
2 x 1.305 x 0.38 x 0.075 = 0.07 Cum
1 x 0.350 x 0.38 x 0.075 = 0.01 Cum = 0.21 Cum
(for 2 No. Desilting Chambers)
=0.21 x 2 0.42 Cum
0.42
1334
3176.3
First class burnt brick work laid in cement sand mortar 1:7 in foundation and plinth.
Long Wall = 2 x 1.305 x 0.23 x 1.5 = 0.90 Cum
Short Wall= 1 x 1.260 x 0.23 x 1.5 = 0.43 Cum = 1 x 0.50 x 0.115 x 1.5 = 0.09 Cum = 1.42 Cum
(for 2 No. Desilting Chambers)
1.42 x 2 = 2.84 Cum
2.84
14618
5147.4
12.5 mm thick cement plaster in 1:3
Long Wall = 2 x 1.0 x 1.5 = 3.00 Sqm
Short Wall= 3 x 0.5 x 1.5 = 2.25 Sqm = 5.25 Sqm
(for 2 No. Desilting Chambers)
5.25 x 2 = 10.5 Cum
10.5
2201
209.65
Providing & Fixing RCC Road Gully grating & frame size 457mm x 457mm (for 2 No. Desilting Chambers)
2
2678
1339
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
1 x 0.5 x 0.075 =0.04 Cum
(for 2 No. Desilting Chambers)
0.04 x 2 = 0.08 Cum
0.08
434
5433.95
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
1 x 0.5 x 0.075 = 0.04 Qtl
(for 2 No. Desilting Chambers)
0.04 x 2 = 0.08 Qtl
0.08
547
6844.59
Providing, laying, fixing & jointing of P.V.C pipes as per ISI-4985 (ISI marked with the prior approval of Engineer- in-charge) along the trenches and laying the same in trenches to corect alignment and gradients, cutting, jointing and testing complete as per specifications.
-
-
-
160 mm o/d PVC pipe of 4 kgf.
35
23802
680.08
110 mm o/d PVC pipe of 4 kgf.
360
118544
329.29
Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in built up area where width of street / lane from wall to wall is less than 3 meter including trimming and dressing sides leveling of beds of trenches to correct grade , cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals, Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.
(a) Earth work upto 1.5 m depth (i) All classes of soil except rocky
-
-
-
395 x 0.75 x 0.75 = 222.19 Cum
222.19
39565
178.07
Construction of masonary Sluice Valve
Chamber excluding Sluice valve cover as per
standard design & drawings of public health
department.
-
-
-
Size 0.60 x 0.60 mtr.
2
11179
5589.83
Size 0.45 x 0.45 mtr.
50
200550
4011
Electrical Works
-
-
-
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
-
-
-
Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring fan point (Without fan box)
320
349340
1091.69
Wiring light point
527
401821
762.47
Wiring 6Amp. Plug control comprising wall socket point
33
12254
371.36
Wiring 16/20Amp. power plug control point
19
9082
478.03
Wiring 6Amp. wall socket point
79
48895
618.93
Wiring call-bell point
1
744
744.03
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. universal Socket (shuttered) and 2Nos. 16/20Amp. switch with indicator (Modular accessories).
67
55394
826.79
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
6
4960
826.79
PVC INSULATED FR COPPER CONDUCTOR CABLES:
-
-
-
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
Overall size 1.5sq.mm (Un-sheathed)
1740
42891
24.65
Overall size 2.5sq.mm (Un-sheathed)
3440
127211
36.98
Overall size 4sq.mm (Un-sheathed)
1640
87592
53.41
Overall size 6sq.mm (Un-sheathed)
3160
233713
73.96
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
3270
231516
70.8
HEAVY GAUGE WELDED CONDUIT PIPES:
-
-
-
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan.
200
26338
131.69
XLPE INSULATED ARMOURED CABLES (LOOSE):
-
-
-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
Overall size 10sq.mm (2Core) Armoured (Loose)
40
4635
115.89
Overall size 25sq.mm (3.5Core) Armoured (Loose)
350
65908
188.31
Overall size 70sq.mm (3½ Core) Armoured (Loose)
150
61234
408.23
Overall size 120 sq.mm (3½ Core) Armoured (Loose)
60
32079
534.65
Overall size 10sq.mm (4Core) Armoured (Loose)
100
14617
146.17
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)
120
16054
133.79
Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)
325
50674
155.92
Double Walled Corrugated HDPE Pipe 90/76mm (Outer/ Inner dia.)
190
37830
199.11
MINIATURE CIRCUIT BREAKERS:
-
-
-
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
MCB Single Pole 6-32amp. (10kA, Curve-C)
216
41165
190.58
MCB Double Pole 6-32amp. (10kA, Curve-C)
29
16827
580.27
MCB Triple Pole 6-32amp. (10kA, Curve-C)
4
3441
860.45
MCB Four Pole 6-32amp. (10kA, Curve-C)
1
1186
1186.14
MCCB's (FOR PANELS & SHEET ENCLOSURE):
-
-
-
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
MCCB Four Pole 40amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
13
100681
7744.7
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
3
23234
7744.7
MCCB Four Pole 125amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
9342
9342.02
MCCB Four Pole 160amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
15166
15166.86
MCCB Four Pole 250amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
15375
15375.83
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:
-
-
-
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars,earth bars,cement spill protector, color- coded interconnecting wire set,cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
SP&N Double Door Distribution Board 4 way each
1
1101
1101.28
SP&N Double Door Distribution Board 8 way each
23
32574
1416.27
SP&N Double Door Distribution Board 12 way each
1
1797
1797.9
TP&N Horizontal Double Door Distribution Board 6 way each
1
3592
3592.17
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
-
-
-
TP&N Double Door Vertical DB's 4 way each (With provision of FP MCCB upto 125amp)
5
38193
7638.67
8 SWG COPPER EARTHING :
-
-
-
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long
9
76246
8471.83
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)
180
61857
343.65
COPPER EARTHING(Upto 8 metre in Length):
-
-
-
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length)
4
54919
13729.84
COPPER EARTHING STRIP (As Additional Length):
-
-
-
Fixing additional Length of earthing with Copper Tape (On surface/Flushed) with petty material as required etc.:-
-
-
-
Additional Length 20mm x 3mm thick Copper Tape
80
41415
517.69
ON LOAD CHANGEOVER SWITCH (Without Sheet Enclosure):
-
-
-
Supply and erection of On Load Change over Switch with advance neutral UNIT in sheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-
-
-
-
On Load Change Over Switch Four Pole 125amp., 415volts
1
8964
8964.28
On Load Change Over Switch Four Pole 200amp., 415volts
1
11528
11528.56
LT PANELS:
-
-
-
Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).
Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel.
-
-
-
The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc.
-
-
-
The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.
-
-
-
Painting:- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work . Busbars:-The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.
-
-
-
Metering:-The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:-
-
-
-
LT Panel enclosure having space for 1No. Incomer MCCB 250Amp. and 6Nos. outgoing MCCB's 40amp. to 125amp. according to the requirement at site (Approx. size 1300 x 1650 x 400mm)
2
192518
96259.3
Schedule D2 (Lighting Fixtures & Fans)
-
-
-
Supply and erection of BLDC 5-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 225 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.
245
1133860
4628
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
67
52327
781
Supply and Erection of Recess mounted luminaire LED Panel (2'x2') 36w (100 Lumen/Watt). with glare free uniform illumination with longer life and less maintenance including cutting of ceiling , erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
51
224400
4400
Supply and erection of Exhaust Fan 380/375 mm dia 1400mm RPM including erection, connections and testing etc. Complete with petty material complete in all respect as appd. and desired by the Engineer in charge of work.
6
27780
4630
Supply and Erection of Surface LED Panel 1 x 4 ft 40/42 W (100/110 Lumen/Watt) including , erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer-in-charge at site.
415
2342675
5645
Supply & Erection of 1550-1650 VA Sine wave power Invertor Including Erection, Testing .Complete in all respects as per satisfaction of Engineer incharge of work.
1
8742
8742
Supply & Erection of invertor Tubular Battery 12 V 200/210 AH comple with stand Including Erection, Testing .Complete in all respects as per satisfaction of Engineer incharge of work.
1
16162
16162
Supply and erection of 2 Ton Split AC three Star invertor complete in all respects as approved and desired by the Engineer in-charge at site.
6
311082
51847
Supply and erection of AC pipe complete in all respects as approved and desired by the Engineer in-charge at site.
120
50520
421
Supply and erection of AC Stand for Out Door Unit complete in all respects as approved and desired by the Engineer in-charge at site
6
6702
1117
AUTOMATIC VOLTAGE STABLIZER:
-
-
-
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
-
-
-
Automatic Voltage Stablizer 5 KVA
6
49147
8191.28
Schedule D3 (Campus & Security Lights)
-
-
-
GALVANIZED STEEL OCTAGONAL POLES FOR WIND VELOCITY OF 169 Km/ HOUR:
-
-
-
Supply and erection of Galvanized Steel Octagonal Pole (Sheet thickness 3mm) designed to withstand wind speed 169km/ hour of suitable length (Raw material confiming to IS-5986 (FE-510), BSEN-10025S-355J or ASTM-572A (GR-50)) and thickness of galvanization (70mm thick) conforming to IS:2629/ IS:2633/ IS:4759, BSEN-ISO-1461-1991 OR ASTM-A123/A123M-02. The pole shall be in single piece hot dip galvanized and shall be tapered towards the top. The bottom section shall have openable slot with exterior surface door & shall have suitable locking arrangement for housing three phase 4wire cable connection, bakelite sheet, MCB, loop in and out arrangement for incoming/ outgoing cables. There shall be suitable arrangement for earthing. Rigid Base plate of suitable size and thickness shall be welded inside and outside at the bottom of pole with provision for fixing 4 foundation bolts. The octagonal pole shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. The foundation shall be erected over cement concrete M20 with steel of given size as per design of original pole manufacturer to fixed up to a required planting depth below ground level as required:-
-
-
-
Galvanized Octagonal Pole Overall Length 6 metre (Sheet thickness 3mm), Top dia.(A/F) 70mm and bottom dia. (A/F) 130mm, Foundation size below G/L 550mm x 550mm x 1200mm, 4Nos. Foundation Bolts size 20mm dia., Length≥600mm with Base Plate Dimensions 220mm x 220mm x 12mm Thick (For Campus Lighting)
11
233508
21228.03
3-STEPPED STEEL TUBULAR POLE:
-
-
-
Supply and erection of 3-Stepped steel tubular swaged and welded pole (410-SP-Mpa) of suitable length confirming to IS: 2713- (PART-II)-1980 (Steel tubes confirming to IS: 1161-1979, UTS 42 kgf/ Sq.mm) to fix up to a required planting depth below ground level in a hole of excavation about 45 cm dia. and suitable depth to fill up to 15 cm below G/L with 1:2:4 cement concrete mixture including painting of pole with two coats of approved aluminium paint as required:-
-
-
-
Overall length 7 metre, with planting depth 1.25 metre, length of sections 4 metre, 1.5 metre and 1.5 metre (Bottom, Middle and Top respectively), Outer dia and thickness of sections 114.3mm x 4.5mm, 88.9mm x 4.05mm and 76.1mm x 3.25mm (Bottom, Middle and Top respectively) with approximate weight 73 kg. (410 SP-2) and base Plate weight 7.5 kg. of size 12mm thick about 30 cm dia. ( For Campus High Mast)
2
21304
10652.47
Overall length 9 metre, with planting depth 1.5 metre, length of sections 5 metre, 2 metre and 2metre (Bottom, Middle and Top respectively), Outer dia and thickness of sections 114.3mm x 5.4mm, 88.9mm x 4.85mm and 76.1mm x 3.25mm (Bottom, Middle and Top respectively) with approximate weight 108 kg. (410 SP-27) base Plate weight 7.5 kg. of size 12mm thick about 30 cm dia. (For Vollyball Ground Lighting)
6
89211
14868.57
GALVANIZED OCTAGONAL POLE BRACKETS:
-
-
-
Supply and erection of bracket for galvanized octagonal pole, the bracket should be fixed on the top of the pole having top outer dia. 70mm to 90mm (A/F) complete in all respect as approved by the Engineer-in-charge at site:-
-
-
-
Single arm bracket 1 metre long for galvanized octagonal pole
11
22446
2040.63
Supply and erection of G.I. Pipe 50mm dia. (Medium) Single/ Double/ Triple/ Four/ Six arm bracket of suitable length welded with MS canopy 125mm inner dia., outer dia 140.8mm (Medium), 450mm long suitable for 3 stepped steel tubular swaged and welded pole with top outer section dia. 114.3mm. The MS canopy should have 3no. holes for fixing the bracket at the top end of the pole with the help of 3Nos. ½" x 1½" size nut bolt fully threaded. The bracket should have MS sheet (1.62mm thick) ring of 140.8mm dia. for covering the top end of the canopy. The MS canopy and GI bracket should be welded at tentative angle 105º (105 degree) inclination with MS sheet 5mm thick triangular in shape having dimensions 225/300/375mm x 150mm x 5mm thick (225mm for 1.5m, 300mm for 2m & 375mm for 2.5m long bracket) with two coats of an approved aluminium paint as desired by Engineer-in-charge at site:-
-
-
-
Six Arm Bracket 2 metre Long for Steel Tubular Pole (8.5 to 11m)
2
22422
11211.14
Making of Cement Concrete muff of suitable size and length with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole sufficient to completely flush a SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirming to IS:14772, inner dimensions 250mm x 200mm x 100mm with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's). The SMC Junction Box is to be fixed with the pole by a MS flat clamp of size 20mm x 2mm thick. PVC pipe 40mm dia. (2No.x0.60m) should be provided for incoming and outgoing cables. The outer surface of the muff shall be finished with pure cement & two coats of white snowcem complete in all respect as approved and desired by the Engineer In-Charge at site:-
-
-
-
Cement Concrete Muff of Overall Size 450mm dia., 80cm Long
8
14007
1750.92
Supply and erection of LED Street Light 45 watt (including LED driver) with pressure die cast aluminium housing with control gear ( IP 66 protection),THD 10%, CRI minimum 70, High power LED with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, efficacy of LED fixture minimum 120 lumens per watt, complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to CM Punjab vide letter No. AT-2021/GL 1410-1422 Dated 06/05/2021. . (For Campus Lighting)
11
48015
4365
Supply and erection of LED Street Light Luminaire 90 watt . The fitting should be erected suitable size including erection, testing & other petty material required at site. complete in all respect as per satisfaction of Engineer Incharge of the work. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No: AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
12
84060
7005
Supply and erection of LED Flood Light 120 watt, AC supply voltage 140-270 volts, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED (with wattage 1 to 5 watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No: AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. . (On Building Structure as secruity Lights)
9
93825
10425
Supply and erection of LED 200 W Flood Light Should Be Installed On the Existing Bracket / on Wall AC supply voltage 140-270 volts, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED (with wattage 1 to 5 watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No: AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. ( For Vollyball Ground)
12
187260
15605
Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:-
-
-
-
SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement
9
6864
762.73
SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT LINE ITEMS, MS CHANNELS, BRASS GLANDS, ALUMINIUM & COPPER THIMBLES:
-
-
-
CUBICAL PEDESTAL:
-
-
-
Supply and erection of Sheet metal cubical pedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4" hinges & locking system with single/ double door openable placed on MS strip of size 12.5mm x 2.5mm thick welded with MS sheet, 4Nos. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs. Front door welded x-sectionally with MS flat 25mmx5mm. The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high and pedestal with 4 Nos. supporting members each of MS flat 50mmx6mm thick according to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint & bonding to the existing earth. The Pedestal platform should be filled with 1:2:4 cement concrete mixture and erected 150mm high from the top of the cement concrete platform. The job is to be completed as approved by Engineer-in-charge:-
-
-
-
Cubical Size 900mm high, 600mm wide and 350mm deep with platform dimensions 700mm x 450mm x 450mm
1
12641
12641.37
TIMER:
-
-
-
S/E of Microprocessor Based Street Light Controller with digital time switch daily programmed with stand by lithium battery with back up of 6 years with min. time between 2 switching operations is 1 minute, three pole power contactors 40A. with coil voltage 220-230V AC with 1 no. aux. contact NO, MCB 2 pole 40amp. (C-Curve, 10kA) & power wiring with single core PVC insulated FR cable 10 sq. mm and control wiring with PVC insulated FR cable 1 sq. mm, 1 no. two position selector switch to bypass timer and other accessories & petty material (din rail, 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) should be fixed on bakelite sheet 6mm thick to be mounted in a IP54 surface/ flush mounting powder coated sheet metal (1.60mm thick) cabinet having size 450mm x 600mm x 150mm to switch ‘ON’ all the 3 phases & switch ‘OFF’ 3 phases pre-fixed timings complete in all respect as per satisfaction of Engineer-in-charge:-
-
-
-
Street Light Controller (For Single Phase Circuit) with 1 No. Three Pole Power Contactor 40A, 1 No. MCB 2 Pole 40amp. (C-Curve,10kA) & petty material (Din rail, 1 No. 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts)
3
28182
9394.06
8 SWG COPPER EARTHING :
-
-
-
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long
2
16943
8471.83
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)
40
13746
343.65
Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:-
-
-
-
GI Earth rod 20 mm dia., 3 mtr. Long
19
24220
1274.74
PVC INSULATED FR COPPER CONDUCTOR CABLES:
-
-
-
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
Overall size 1.5sq.mm (Un-sheathed)
300
7395
24.65
XLPE INSULATED ARMOURED CABLES (LOOSE):
-
-
-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
Overall size 6sq.mm (2Core) Armoured (Loose)
700
70056
100.08
Overall size 6sq.mm (4Core) Armoured (Loose)
100
11984
119.84
XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):
-
-
-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
-
-
-
Overall size 6sq.mm (2Core) Un-armoured (On-Surface)
300
25680
85.6
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)
640
85625
133.79
SHEET METAL IRON CLAD SWITCHES:
-
-
-
Supply and erection of sheet metal Iron Clad Switches on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications:-
-
-
-
ICTPN Switch 32amp., 415volts
1
1646
1646.94
Schedule- D4 ( Networking )
-
-
-
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring Networking socket point RJ45 (one module)
67
30915
461.43
Wiring Telephone socket point RJ11 (one module)
1
355
355.24
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (flushed)
1500
106200
70.8
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)
500
77960
155.92
Supply and erection of Networking Switch 24 p -10/100/1000 Base T-port, fully ipv6 compatible, Access control list, ARP spooling ,IP mac portbinding,static route ,full duplex10/100/1000, switching capacity-20gbps,poe-802 3af(poe+),safety certificates,-CB,UL,BSMI,CCCgigabit speed poe . complete in all respects as approved and desired by the Engineer in-charge at site.
2
67110
33555
Supply and erection of Networking Switch 16 p -10/100/1000 Base T-port, fully ipv6 compatible, Access control list, ARP spooling ,IP mac portbinding,static route ,full duplex10/100/1000, switching capacity-20gbps,poe-802 3af(poe+),safety certificates,-CB,UL,BSMI,CCCgigabit speed poe Make Dlink,Netgear Commrax. complete in all respects as approved and desired by the Engineer in-charge at site.
2
35728
17864
Supply and erection of Managed Switch 24 p -10/100/1000 Base T-port, fully ipv6 compatible, Access control list, ARP spooling ,IP mac portbinding,static route ,full duplex10/100/1000, switching capacity-20gbps,poe-802 3af(poe+),safety certificates,-CB,UL,BSMI,CCCgigabit speed poe Make Dlink,Netgear Commrax. complete in all respects as approved and desired by the Engineer in-charge at site.
1
42294
42294
Supply and erection of Networking Cable,cat6,UTP 23AWG Complete in all respects as approved and desired by the Engineer in-charge at site.
3000
168000
56
Supply and erection of cat 6 patch panel 24port 10/100/1000 Base -T Ethernet tranmission Complete in all respects as approved and desired by the Engineer in-charge at site.
5
26105
5221
Supply and erection of Network rack 9u PDU unit 1u cable manager fan assembly, dimension,480 x550 x600 in mm Complete in all respects as approved and desired by the Engineer in-charge at site.
5
36425
7285
Supply and erection of cat 6 Patch cord 1m , 10/100/1000Base-T Ethernet ,Transmission, snagless, Complete in all respects as approved and desired by the Engineer in-charge at site.
66
16896
256
Supply and erection of UPS 1kvainput voltage150-300 Vac heavy duty 7ah battery cold start, & AVR enable LED indicating BIS india certfied, Complete in all respects as approved and desired by the Engineer in-charge at site.
5
21550
4310
Supply and erection of LAN Cable,cat6,U/UTP/outdoor,23awg,pvc,/pe eccs black armoured outdoor 23AWG Complete in all respects as approved and desired by the Engineer in-charge at site.
520
57200
110
Schedule D5 ( Public Address System )
-
-
-
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (flushed)
1000
70800
70.8
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)
500
77960
155.92
Supply and erection of Microphone wired frequency 50-15000HZ,2.5m V/pa, complete in all respects as approved and desired by the Engineer in-charge at site.
1
18562
18562
Supply and erection of Main Amplifier 600W,220v, complete in all respects as approved and desired by the Engineer in-charge at site.
1
83515
83515
Supply and erection of Speaker csd-520-30W, complete in all respects as approved and desired by the Engineer in-charge at site.
15
125235
8349
Supply and erection of Speaker Cable, complete in all respects as approved and desired by the Engineer in-charge at site.
2000
134000
67
Supply and erection of Connectors for Speaker System including Erection, complete in all respects as approved and desired by the Engineer in-charge at site.
1
6690
6690
Schedule - B (New Additional Blocks)
-
-
-
Schedule D6 (New Blocks E.I)
-
-
-
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
-
-
-
Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring fan point (With fan box)
152
183951
1210.21
Wiring light point
421
320999
762.47
Wiring 6Amp. Plug control comprising wall socket point
35
12997
371.36
Wiring 16/20Amp. power plug control point
31
14818
478.03
Wiring light point with double control switches.
5
6630
1326.09
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. universal Socket (shuttered) and 2Nos. 16/20Amp. switch with indicator (Modular accessories).
9
7441
826.79
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
23
19016
826.79
PVC INSULATED FR COPPER CONDUCTOR CABLES:
-
-
-
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
Overall size 1.5sq.mm (Un-sheathed)
1065
26252
24.65
Overall size 2.5sq.mm (Un-sheathed)
1410
52141
36.98
Overall size 4sq.mm (Un-sheathed)
1330
71035
53.41
Overall size 10sq.mm (Un-sheathed)
1460
175959
120.52
Overall size 16sq.mm (Un-sheathed)
250
46907
187.63
Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
Overall size 2.5sq.mm (50/0.25mm), 3Core
600
62454
104.09
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (flushed)
925
65490
70.8
Heavy Gauge PVC Conduit Pipe 32 mm dia. (flushed)
570
55483
97.34
HEAVY GAUGE WELDED CONDUIT PIPES:
-
-
-
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan.
26
3423
131.69
XLPE INSULATED ARMOURED CABLES (LOOSE):
-
-
-
Overall size 6sq.mm (2Core) Armoured (Loose)
390
39031
100.08
Overall size 70sq.mm (3½ Core) Armoured (Loose)
150
61234
408.23
Overall size 10sq.mm (4Core) Armoured (Loose)
130
19002
146.17
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 50/38mm (Outer/ Inner dia.)
530
70908
133.79
Double Walled Corrugated HDPE Pipe 63/51mm (Outer/ Inner dia.)
140
21828
155.92
MINIATURE CIRCUIT BREAKERS:
-
-
-
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
MCB Single Pole 6-32amp. (10kA, Curve-C)
224
42689
190.58
MCB Double Pole 6-32amp. (10kA, Curve-C)
6
3481
580.27
MCB Triple Pole 32amp. (10kA, Curve-C)
12
10325
860.45
MCB Triple Pole 63amp. (10kA, Curve-C)
4
5302
1325.51
MCB Four Pole 32amp. (10kA, Curve-C)
4
4744
1186.14
MCB Four Pole 63amp. (10kA, Curve-C)
4
7003
1750.76
MCCB's (MOULDED CASE CIRCUIT BREAKER):
-
-
-
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
4
26506
6626.73
MCCB Four Pole 160amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
2
20285
10142.89
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:
-
-
-
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars,earth bars,cement spill protector, color- coded interconnecting wire set,cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
SP&N Double Door Distribution Board 4 way each
1
1101
1101.28
SP&N Double Door Distribution Board 8 way each
5
7081
1416.27
TP&N Horizontal Double Door Distribution Board 4 way each
2
5829
2914.93
TP&N Horizontal Double Door Distribution Board 6 way each
4
14368
3592.17
TP&N Horizontal Double Door Distribution Board 8 way each
2
8577
4288.8
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
-
-
-
TP&N Double Door Vertical DB's 4 way each (With provision of FP MCCB upto 125amp)
4
30554
7638.67
TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB upto 125amp.)
2
19338
9669.18
8 SWG COPPER EARTHING :
-
-
-
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long
7
59302
8471.83
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)
130
44674
343.65
Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:-
-
-
-
SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement
55
41950
762.73
XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):
-
-
-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
-
-
-
Overall size 6sq.mm (2Core) Un-armoured (On-Surface)
300
25680
85.6
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring Networking socket point RJ45 (one module)
10
4614
461.43
Supply and erection of Networking Cable,cat6,UTP 23AWG Complete in all respects as approved and desired by the Engineer in-charge at site.
1000
56000
56
Schedule D7 (Lighting Fixtures & Fans for New Blocks)
-
-
-
Supply and erection of BLDC 5-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 225 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.
152
703456
4628
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
200
156200
781
Supply and erection of Exhaust Fan 380/375 mm dia 1400mm RPM including erection, connections and testing etc. Complete with petty material complete in all respect as appd. and desired by the Engineer in charge of work.
29
134270
4630
Supply and Erection of Surface LED Panel 1 x 4 ft 40/42 W (100/110 Lumen/Watt) including , erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer-in-charge at site.
95
536275
5645
Supply and Erection of Recess mounted luminaire LED Panel (2'x2') 36w (100 Lumen/Watt). with glare free uniform illumination with longer life and less maintenance including cutting of ceiling , erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
75
330000
4400
SSupply and erection of LED Flood Light 120 watt, AC supply voltage 140-270 volts, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED (with wattage 1 to 5 watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No: AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. .( On Terrece of Multipurpose Hall For Security)
6
62550
10425
Supply and erection of LED Wellglass 70 W fitting 10KV SPD & IP66 should Be Installed On the Existing Bracket / channell Well-glass lighting fixtures are the lighting of indoor structures, for which wide beam lighting is needed. luminaries, provided in B-22 holder and 70w in LED range, have an excellent corrosion resistance due to the body made of aluminium with low content of copper and tempered glass of lamp compartment.
IP Rating : IP 54, Material Type : Aluminium + Polycarbonate Bowl Mounting Type : Ceiling Surface/ Suspended Luminous Flux : 7000 lm (± 10% ). ( For Indoor Sport Hall)
49
383768
7832
Supply and erection of 2 Ton Split AC three Star invertor complete in all respects as approved and desired by the Engineer in-charge at site.
23
1192481
51847
Supply and erection of AC pipe complete in all respects as approved and desired by the Engineer in-charge at site.
440
185240
421
Supply and erection of AC Stand for Out Door Unit complete in all respects as approved and desired by the Engineer in-charge at site
23
25691
1117
AUTOMATIC VOLTAGE STABLIZER:
-
-
-
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
-
-
-
Automatic Voltage Stablizer 5 KVA
23
143039
6219.13
Supply & Erection of 1550-1650 VA Sine wave power Invertor Including Erection, Testing .Complete in all respects as per satisfaction of Engineer incharge of work.
2
17484
8742
Supply & Erection of invertor Tubular Battery 12 V 200/210 AH comple with stand Including Erection, Testing .Complete in all respects as per satisfaction of Engineer incharge of work.
2
32324
16162
Schedule D8 (Sound System For Multipupose Hall )
-
-
-
Supply, Installation, Testing & Commissioning of two way 15' PA System VX-400 (400W) . complete in all respects as approved and desired by the Engineer in-charge at site.
4
77028
19257
Supply, Installation, Testing & Commissioning of PA active (Bi-amp) loudspeaker SMs-450P(400) . complete in all respects as approved and desired by the Engineer in-charge at site.
2
93892
46946
Supply, Installation, Testing & Commissioning of Subwoofer for stage single 18" modelSWX 1000 (1000w) . complete in all respects as approved and desired by the Engineer in-charge at site.
1
34995
34995
Supply, Installation, Testing & Commissioning of high wattage power amplifier for line array model LXA 1400 . complete in all respects as approved and desired by the Engineer in-charge at site.
1
40136
40136
Supply, Installation, Testing & Commissioning of Studio master live mixer model ORB 2442 high wattage power amplifier for line array model LXA 1400 . complete in all respects as approved and desired by the Engineer in-charge at site.
1
75802
75802
Supply, Installation, Testing & Commissioning of Dynamic live stage microphone model PRO7500DU . complete in all respects as approved and desired by the Engineer in-charge at site.
2
20356
10178
Supply, Installation, Testing & Commissioning of Dynamic microphone model PRO3400 . complete in all respects as approved and desired by the Engineer in-charge at site.
3
20619
6873
Supply, Installation, Testing & Commissioning of handheld uhf microphone dual model AWM700UZ. complete in all respects as approved and desired by the Engineer in-charge at site.
2
18976
9488
Supply, Installation, Testing & Commissioning of handheld uhf microphone single model AWM700UL. complete in all respects as approved and desired by the Engineer in-charge at site.
2
13196
6598
Supply, Installation, Testing & Commissioning of Gooseneck microphone model PGM481. complete in all respects as approved and desired by the Engineer in-charge at site.
2
7630
3815
Supply, Installation, Testing & Commissioning of Studio master active crossover model sx-2. complete in all respects as approved and desired by the Engineer in-charge at site.
1
8186
8186
Supply, Installation, Testing & Commissioning of high wattage power amplifier for speakers model lxa 2400. complete in all respects as approved and desired by the Engineer in-charge at site.
1
58885
58885
Supply, Installation, Testing & Commissioning of Studio master voltage stablizer SVC10000. complete in all respects as approved and desired by the Engineer in-charge at site.
1
8271
8271
Supply, Installation, Testing & Commissioning of digital audio recorder model adp 30R. complete in all respects as approved and desired by the Engineer in-charge at site.
1
5280
5280
Supply, Installation, Testing & Commissioning of Base for gooseneck microphone model pg 848. complete in all respects as approved and desired by the Engineer in-charge at site.
2
7194
3597
Supply, Installation, Testing & Commissioning of microphone stand model dgn. complete in all respects as approved and desired by the Engineer in-charge at site.
5
10715
2143
Supply, Installation, Testing & Commissioning of microphone stand model dgt. complete in all respects as approved and desired by the Engineer in-charge at site.
5
6650
1330
Supply, Installation, Testing & Commissioning of 2 core single cable. complete in all respects as approved and desired by the Engineer in-charge at site.
1000
66000
66
Supply, Installation, Testing & Commissioning of speakon connector. complete in all respects as approved and desired by the Engineer in-charge at site.
20
6440
322
Supply, Installation, Testing & Commissioning of male xlr connector. complete in all respects as approved and desired by the Engineer in-charge at site.
110
62480
568
Supply, Installation, Testing & Commissioning of female xlr connector. complete in all respects as approved and desired by the Engineer in-charge at site.
110
62480
568
Supply, Installation, Testing & Commissioning of 2c speaker cable. complete in all respects as approved and desired by the Engineer in-charge at site.
1000
94000
94
Supply, Installation, Testing & Commissioning of juction box on stage. complete in all respects as approved and desired by the Engineer in-charge at site.
4
16624
4156
Schedule D9 (Multipurpose Hall Stage Lighting)
-
-
-
Supply, Installation, Testing & Commissioning of Leksa Led par lighting 54 x 3 w Complete in all respects as approved and desired by the Engineer in-charge at site.
8
66904
8363
Supply, Installation, Testing & Commissioning of DMX Controller. Complete in all respects as approved and desired by the Engineer in-charge at site.
1
26489
26489
Supply, Installation, Testing & Commissioning of single cable. Complete in all respects as approved and desired by the Engineer in-charge at site.
200
13800
69
Supply, Installation, Testing & Commissioning of connector. Complete in all respects as approved and desired by the Engineer in-charge at site.
20
12100
605
Schedule D10 ( CCTV Camera )
-
-
-
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
Wiring Networking socket point RJ45 (one module)
29
13381
461.43
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
Heavy Gauge PVC Conduit Pipe 25mm dia. (flushed)
1500
106200
70.8
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)
500
77960
155.92
Supply and erection of Networking Switch 8p -10/100/1000 Base T-port, fully ipv6 compatible, Access control list, ARP spooling ,IP mac portbinding,static route ,full duplex10/100/1000, switching capacity-20gbps,poe-802 3af(poe+),safety certificates,-CB,UL,BSMI,CCCgigabit speed poe . complete in all respects as approved and desired by the Engineer in-charge at site.
5
69720
13944
Supply and erection of CCTV Camera, 4Mp,Network Guard 3.6mm lens,20mtr IR ,IP67 LED built in mic full hd,indore complete in all respects as approved and desired by the Engineer in-charge at site.
14
122388
8742
Supply and erection of CCTV Camera, 4Mp,Network Guard 3.6mm lens,20mtr IR ,IP67 LED built in mic full hd ,Outdoor complete in all respects as approved and desired by the Engineer in-charge at site.
15
164790
10986
Supply and erection of NVR 32 channel,network video recorder,withouthard disk 2 SATA,video system-PAL, Android/IOS smart mobile app on VIF protocol,online device upgrade Complete in all respects as approved and desired by the Engineer in-charge at site.
1
27319
27319
Supply and erection of Networking Cable,cat6,UTP 23AWG Complete in all respects as approved and desired by the Engineer in-charge at site.
2000
112000
56
Supply and erection of cat 6 patch panel 24port 10/100/1000 Base -T Ethernet tranmission Complete in all respects as approved and desired by the Engineer in-charge at site.
5
26105
5221
Supply and erection of Network rack 9u PDU unit 1u cable manager fan assembly, dimension,480 x550 x600 in mm Complete in all respects as approved and desired by the Engineer in-charge at site.
5
36425
7285
Supply and erection of cat 6 Patch cord 1m , 10/100/1000Base-T Ethernet ,Transmission, snagless, Complete in all respects as approved and desired by the Engineer in-charge at site.
58
14848
256
Supply and erection of UPS 1kvainput voltage150-300 Vac heavy duty 7ah battery cold start, & AVR enable LED indicating BIS india certfied, Complete in all respects as approved and desired by the Engineer in-charge at site.
1
4310
4310
Supply and erection of Hardisk 10 TB ,Surveillance internal hard drive 7200rpm class ,SATA 6b/s,265MB cache .3.5" , Complete in all respects as approved and desired by the Engineer in-charge at site.
1
20816
20816
Supply and erection of LAN Cable,cat6,U/UTP/outdoor,23awg,pvc,/pe eccs black armoured outdoor 23AWG Complete in all respects as approved and desired by the Engineer in-charge at site.
520
57200
110
Schedule D11- Building Beautifican Special Lighting
-
-
-
Supply, Installation, Testing & Commissioning of 18/22 w LED Inground light /projectors Round /Square , glare free light distribution having tempered step glass with superior performance high-purity lenses made power coated and aluminium housing with cct 3000K IP 66 protection. Complete in all respects as approved and desired by the Engineer in-charge at site.
8
85832
10729
Supply, Installation, Testing & Commissioning of 36/40 w LED Inground light /projectors Round /Square , glare free light distribution having tempered step glass with superior performance high-purity lenses made power coated and aluminium housing with cct 3000K IP 66 protection. Complete in all respects as approved and desired by the Engineer in-charge at site.
11
159753
14523
Supply, Installation, Testing & Commissioning of 70/75 w LED projector / FL lumminare with high purity lenses for superior performance aluminium housing cct 3000 K IP66 protection. Complete in all respects as approved and desired by the Engineer in-charge at site.
10
214780
21478
Supply, Installation, Testing & Commissioning of 90/100 w LED projector / FL lumminare with high efficiency long life with glass diffuser superior performance aluminium housing cct 3000 K IP66 protection. Complete in all respects as approved and desired by the Engineer in-charge at site.
8
171824
21478
Supply, Installation, Testing & Commissioning of 144/150 w LED projector / FL lumminare with high efficiency long life with glass diffuser superior performance aluminium housing cct 3000 K IP66 protection. Complete in all respects as approved and desired by the Engineer in-charge at site.
9
250110
27790
Add Culture Cess
166866974
1668669
0.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements