Public Works Department Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 13,93,000Document Cost
₹ 30,000Tender Fee
₹ 5,900
Summary
Construction Of Multipurpose Indoor Hall At Dirba Distt. Sangrur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CEPW_130861_1Tender No
Bid No 31 Dt. 02-12-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. (10.16)
244.19
6421
1568136.9
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
636.82
221
140890.06
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth
. (11.3 i)
173.92
5835
1014873.64
... More
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture. (10.21)
514.59
7211
3711181.91
... More
Extra Rate for First Floor
160.39
190
30583.17
... More
Extra Rate for Second Floor
103.57
381
39498.49
... More
Centring and shuttering for Columns ( Square or Rectangular or plygonal in plain) in superstructure
992
502
498499.84
... More
Extra Rate for First Floor
409.44
10
4315.5
... More
Extra Rate for Second Floor
194.8
21
4104.44
... More
Centering and shuttering for columns (circular or curved in plain)
40.64
507
20636.59
... More
Extra Rate for First Floor
10.32
10
108.77
... More
Extra Rate for Second Floor
0.7
21
14.75
... More
Centring and shuttering for sides and soffits of beam, beams launchingsgirders bressumers, lintels
1166.08
400
466816.81
... More
Extra Rate for First Floor
241.04
10
2540.56
... More
Extra Rate for Second Floor
628.16
21
13235.33
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
1971.66
560
1105036.56
... More
Extra Rate for First Floor
632.28
10
6664.23
... More
Centring and shuttering for stair cases with sloping with soffits including risers and stringers.
18.07
469
8490.37
... More
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
1250.46
7876
9849773.38
... More
Extra Rate for First Floor
314.17
13
4304.13
... More
Extra Rate for Second Floor
207.14
27
5673.56
... More
First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. (11.6)
432.71
6063
2623910.17
... More
Extra rate for First Floor
149.37
190
28481.87
... More
Extra rate for Second Floor
137.01
381
52251.5
... More
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement sand mortar in super structure.
684.28
805
551146.48
... More
Extra rate for First Floor
203.11
15
3209.14
... More
Extra rate forSecond Floor
131.29
31
4150.08
... More
Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines. (10.27)
16.88
287
4855.19
... More
12.5 mm thick cement plaster 1:5 (15.10)
2714.99
200
544084
... More
Extra Rate for First Floor
961.41
2
2028.58
... More
Extra Rate for Second Floor
724.65
4
3050.78
... More
20mm thick cement plaster 1:5 in two coat work (15.21)
2714.99
274
746052.1
... More
Extra Rate for First Floor
961.41
2
2028.58
... More
Extra Rate for Second Floor
724.65
4
3050.78
... More
Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge.
85
244
20774.85
... More
Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend
16
142
2275.52
... More
Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
16
88
1415.84
... More
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. (13.45)
8
112
902.56
... More
Providing and fixing in position gratings 150mmx150mm for gully trap. PVC grating
8
87
702.96
... More
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3. (13.51)
8
796
6371.36
... More
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing (13.13 (i))
482.7
753
363656.53
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. (13.55)
137.04
74
10165.63
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres
429.72
66
28520.52
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
2259.71
293
664196.56
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material (14.3)
2404.09
572
1376221.32
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge to be laid below the topping using mechanical mixer for mixing of material (14.11)
291.31
225
65783.62
... More
Extra Rate for First Floor
291.31
3
920.54
... More
Marble stone flooring with 12-15 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Udaipur Green Marble Tiles of thickness 12mm to 15mm Slabs sizes above 0.50 sqm (14.74 (iv) (b))
291.08
1223
356092.72
... More
Extra Rate for First Floor
7.16
3
22.63
... More
Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ) Size 600x600 mm (14.113 (a))
385.32
1118
431038.22
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm.
385.32
186
71850.62
... More
Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (14.84)
57.96
1165
67547.16
... More
Extra Rate for First Floor
57.96
3
183.15
... More
Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing (14.86)
0.9
1416
1274.53
... More
Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness and colouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects. (14.142)
5.86
150
880.29
... More
Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (14.89 b)
42.39
2973
126034.8
... More
Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications (24.58)
209.75
6321
1326033.21
... More
Providing and laying Laminate wooden flooring (Grade AC4 or AC4+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer.
26.07
2151
56083.09
... More
Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.)
177.9
187
33359.81
... More
Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge. (14.135)
84.76
1094
92763.04
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) :
1741.98
370
645978.44
... More
Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. ( 620+20%)
285.44
783
223727.87
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
Float glass panes of 5 mm thickness
281.92
1090
307397.11
... More
Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect. Glazing area above 0.09 sqm 5.0mm thick Plate glass (INDIAN)
81.6
813
66365.28
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
1268.62
387
491831.29
... More
Providing Polyster Powder coating 50 micron any coloured specrified to aluminium section of various sizes including carrriage of material from marktet to workshop ..
3010.6
71
215679.38
... More
Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.
(755+20%)
281.92
954
269084.18
... More
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position (18.4)
54.17
10661
577523.7
... More
Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.
97.56
501
48923.41
... More
Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020-1998,Drawings and to the entire satisfaction of engineer-in-charge.
31.37
2982
93559.77
... More
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
55.21
2430
134183.49
... More
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
55.21
116
6456.26
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm
20
209
4193
... More
Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects.
89.02
956
85154.75
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
5429.98
84
457638.71
... More
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.
539.36
297
160238.46
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
3835.28
79
303025.47
... More
Finishing walls with Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
2134.06
126
269787.87
... More
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti ncluding finishing the surface to required finish complete.
124.22
45
5627.28
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
124.22
29
3664.56
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
487.74
69
33912.56
... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
727.03
25
18379.32
... More
Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.60 mm (+ 0.05 %) thick (712+30%)
2243.74
975
2187915.75
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc. ISI Marked) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete having span:-Above 15.00 mt. Span including the cost for machinery i.e. Hydra cranes etc. for hoisting in position.
815.29
11810
9629218.98
... More
Supply & applying Squash court Rebound Wall Hard Plaster system as per international standard. BOUNCE WALL HARD PLASTER shall provided with Silica sand With Cement Mixing 5:1 Total Thickness 10-12mm & Bounce wall Topcoat Plaster is Made 99% Pure Gypsum, Fiber, Marble hard Sand Powder complete in all respects.
118.98
2267
269841.88
... More
Providing and fixing of Made of kiln seasoned treated Mapple Wood Flooring finished with 20 to 21 mm thick, 55 to 90mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove and treated with special anti-termite and water resistant lacquer.
The Under Frame: Made of PINE WOOD runners of 70 mm X 45 mm treated with anti-termite solution and fixed on the bottom side with 10mm Or 19mm thick Air-cushion pads by staple at 350 mm c/c.
The Installation: The IPS sub-floor to be treated with Acrostic and a vapor barrier of 1- 2 ml.(100 - 200 micron) thick to be placed on the leveled IPS sub-floor before lying the under frame. The runners having air-cushion pads to be placed on the vapor barrier in perfect level at 350 mm c/c in one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 10 mm will be left open between the wooden flooring and the surrounding tiled area/walls.
The Finishing: After installation the floor shall be used anti-skid wood filler machine sanded in uniform level and finishing in pu water base polish. the game line marking to be carried out in required colors before applying the finish coat.
Warranty:- Flooring shall have Five Years Warranty
62.45
5142
321146
... More
Supply & installation of Squash court Sound Board as per WSF Specification.The upper 50mm of the Tin – shall project into the court by not more than 15mm at the top and 45mm at the bottom and shall be shaped so as to deflect any ball striking it . and all edges of the Tin shall be rounded. Below the upper 50mm, for the full width of the court, the Tin shall be constructed in such a manner as to make a distinctive noise when struck by the ball.
1
23145
23145.15
... More
Providing and fixing of Made of kiln seasoned treated Tanzanian Teak or equivalent Wooden Flooring BWF Approved finished with 20 to 21 mm thick, 55 to 90mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove and treated with special anti-termite and water resistant lacquer.
The Under Frame: Made of PINE WOOD runners of 70 mm X 45 mm treated with anti-termite solution and fixed on the bottom side with 10mm Or 19mm thick Air-cushion pads by staple at 350 mm c/c.
The Installation: The IPS sub-floor to be treated with Acrostic and a vapor barrier of 1- 2 ml.(100 - 200 micron) thick to be placed on the leveled IPS sub-floor before lying the under frame. The runners having air-cushion pads to be placed on the vapor barrier in perfect level at 350 mm c/c in one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 10 mm will be left open between the wooden flooring and the surrounding tiled area/walls.
The Finishing: After installation the floor shall be used anti-skid wood filler machine sanded in uniform level and finishing in pu water base polish. the game line marking to be carried out in required colors before applying the finish coat.
Warranty:- Flooring shall have Five Years Warranty
1259.48
3967
4996407.54
... More
Providing & applying RED colour PU paint on wall surface & wooden flooring surface
1
6144
6144.73
... More
Providing and instalation of integrally weighted movable Badminton Posts. The badminton posts shall allows regulation net height to be achieved detachable front upright. It shall be manufacture from 47x47mm square pipe 4mm thick. Base shall made up of strong pipe and shall have weight stock of cast/mild steel 70kg each side. Wheels shall non marking with bearing inside and the wheel shall have 100 mm dia. Complete with rubber feet to protect the playing surface and grip on wooden & synthetic floor. The poles shall either powder coated or spray painted.The net shall made up of nylon material ,suitable for all weather use.The four sides of net shall be covered with white waterproof vinyl tapes.
4
27931
111725.4
... More
Supply of set of Moveble Basket Ball Poles having minimum weight 600kg on each side of pole and having adjustable height extension. Each Pole shall consist of Fibre board of size 1.05x1.8mtr and 25mm thick and shall consist of 2 nos dunking rings with net as per Standard Design
1
463961
463961.95
... More
Providing and fixing Gym rubber matt 1 mtr x 10 mtr with 8-10 mm thickness including pasting of matt as per specification and satisfaction of engineer-in-charge.
226.25
2280
515958.6
... More
Providing and Fixing multilayer Polyuerthane flooring (10+2mm) consisting of primer on asphault surface, elastic layer SBR matt (5-12mm), Pore sealer(0.1mm), Cast coating (2-3mm), Antiskid multitop (0.5mm) incliding making of Ground Approved by ITF on already laid Flooring System complete in all respect
562.08
7346
4129242.03
... More
Providing & fixing of knobset made of stainless steel body, having provision of latch and bolt, 3 nos key set, inside push lock model ETL-101A, Finish SS/PB/AB make-ENOX or any equivalent (Lock should be releasable from out side in case of emergency) as per requirement for unisex toilet for PwD complete as per specifications, Harmonised guidelines for PwD and as desired by engineer-in-charge.
3
1145
3435.45
... More
Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
7.92
9997
79181.94
... More
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS-316 Grade Stainless steel Spider.& bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non star bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.
13.66
7498
102433.74
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge
2.28
4313
9833.71
... More
Providing and Fixing of Turbo Fan /Non Electric Exhaust Fan 21"/22" dia to be fitted on roof top/shed etc. with imported polycarbonate body base complete in all respects upto to the entire satisfaction of the Engineer-In-Charge of the work
24
6943
166636.56
... More
Providing and fixing tiled false ceiling at height upto 4 mtr of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending.) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
128.73
1300
167351.57
... More
Construction of Plinth protection complete
-
-
-
... More
Earth work in exavation in foundations, trenches, etc. in all kinds of soil where pick jumper work is not involved and not exeeding 2.0 Mtr. depth and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 Mtr. complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer In-Charge.
74.66
191
14315.31
... More
Cement Concrete 1:8:16 with 40mm guage stone aggregate
using mechanical mixer. (10.6 b ii)
12.44
4165
51820.81
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. (11.3 (i))
22.4
5835
130710.5
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material (14.3)
81.67
572
46751.99
... More
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material). (14.6)
81.67
350
28653.1
... More
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge. (15.10)
98
200
19639.2
... More
OUTER STRUCTURE
-
-
-
... More
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
264
191
50619.36
... More
Cement Concrete 1:8:16 with 40mm guage stone aggregate
using mechanical mixer. (10.6 b ii)
23
4165
95810.18
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
194.8
221
43097.55
... More
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. (10.15)
42.49
6153
261447.34
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
29.61
5430
160804.21
... More
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (10.20)
16.74
6942
116212.76
... More
Centring and shuttering for Columns ( Square or Rectangular or plygonal in plain) in superstructure
54.4
502
27337.09
... More
Centring and shuttering for sides and soffits of beam, beams launchingsgirders bressumers, lintels
79.52
400
31834.24
... More
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 18.18
54.12
7876
426298.91
... More
First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. 11.6
47.84
6063
290096.98
... More
12.5mm thick cement plaster 1:5. (15.10)
239.22
200
47942.08
... More
20 mm thick cement plaster 1:5 in two coats work. (15.21)
239.22
274
65735.26
... More
PARKING
-
-
-
... More
Construction of granular sub-base by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications (CSR 24.7)
179.08
1772
317347.67
... More
Providing, laying and consolidation of of WBM grading-III as per CSR 24.12 (ii) without screening IInd layer
179.08
2391
428221.47
... More
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths).
2350.67
679
1597303.77
... More
Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours.
235.07
68
16097.59
... More
Precast Cement Concrete Kerb Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications
465.4
376
175311.53
... More
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
620.31
22
13721.26
... More
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over an including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
478.44
126
60484.38
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
159.71
69
11104.64
... More
Applying priming coat with metal primer onnew steel or iron work including preparation ofsurface.
159.71
25
4037.47
... More
Iron grated doors, including pintle hinges & arrangements.
2.59
9460
24502.51
... More
Providing Internal Electrical Installations
-
-
-
... More
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
-
-
-
... More
Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring fan point (With fan box)
23
1210
27834.83
... More
Wiring light point
208
762
158593.76
... More
Wiring 6Amp. wall socket point
4
618
2475.72
... More
Wiring 6Amp. Plug control comprising wall socket point
37
371
13740.32
... More
Wiring 16/20Amp. power plug control point
20
478
9560.6
... More
Wiring light point with double control switches.
2
1326
2652.18
... More
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
... More
Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
8
826
6614.32
... More
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
... More
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).
1
707
707.95
... More
PVC INSULATED FR COPPER CONDUCTOR CABLES:
-
-
-
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
Overall size 1.5sq.mm (Un-sheathed)
1717
24
42324.05
... More
Overall size 2.5sq.mm (Un-sheathed)
3610
36
133497.8
... More
Overall size 4sq.mm (Un-sheathed)
352
53
18800.32
... More
Overall size 10sq.mm (Un-sheathed)
384
120
46279.68
... More
Overall size 16sq.mm (Un-sheathed)
156
187
29270.28
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
... More
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
335
70
23718
... More
Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
898
97
87411.32
... More
MINIATURE CIRCUIT BREAKERS:
-
-
-
... More
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Single Pole 6-32amp. (10kA, Curve-C)
120
190
22869.6
... More
MCB Double Pole 40amp. (10kA, Curve-C)
2
789
1578.66
... More
MCB Triple Pole 40amp. (10kA, Curve-C)
10
1188
11889.8
... More
MCB Four Pole 40amp. (10kA, Curve-C)
2
1531
3063.48
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
3
1750
5252.28
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:
-
-
-
... More
Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
... More
SP&N Double Door Distribution Board 8 way each
2
1416
2832.54
... More
TP&N Horizontal Double Door Distribution Board 4 way each
2
2914
5829.86
... More
TP&N Horizontal Double Door Distribution Board 8 way each
2
4288
8577.6
... More
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
-
-
-
... More
TP&N Double Door Vertical DB's 12 way each (With provision of upto FP MCCB 125amp.)
2
12746
25492.9
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):
-
-
-
... More
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
... More
Overall size 10sq.mm (2Core) Un-armoured (Loose)
240
76
18331.2
... More
Overall size 35sq.mm (3½ Core) Un-armoured (Loose)
108
204
22044.96
... More
Overall size 95sq.mm (3½ Core) Un-armoured (Loose)
160
453
72481.6
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
-
-
-
... More
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
... More
Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)
300
133
40137
... More
Double Walled Corrugated HDPE Pipe 90/ 76mm (Outer/ Inner dia.)
150
199
29866.5
... More
COPPER EARTHING:
-
-
-
... More
8 SWG COPPER EARTHING :
-
-
-
... More
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
14
11144
156020.76
... More
COPPER EARTHING STRIP (As Additional Length):
-
-
-
... More
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
... More
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)
210
325
68449.5
... More
COPPER EARTHING:
-
-
-
... More
COPPER EARTHING (Upto 14 metre in Length):
-
-
-
... More
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
2
18663
37326.76
... More
COPPER EARTHING STRIP (As Additional Length):
-
-
-
... More
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
-
-
-
... More
Additional Length 20mm x 3mm thick Copper Tape
30
517
15530.7
... More
SMC GLASS FIBRE INSPECTION BOXES:
-
-
-
... More
Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirming to IS:14772, (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement complete in all respect as approved and desired by the Engineer In-Charge at site:-
-
-
-
... More
SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 300mm x 200mm x 105mm with hinged water tight cover with locking arrangement
12
1100
13210.92
... More
MCCB's (FOR PANELS & SHEET ENCLOSURE):
-
-
-
... More
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
... More
MCCB Four Pole 40amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
7744
7744.7
... More
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
8
7744
61957.6
... More
MCCB Four Pole 200amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
13982
13982.05
... More
ON LOAD CHANGEOVER SWITCH
-
-
-
... More
ON LOAD CHANGEOVER SWITCH (Without Sheet Enclosure):
-
-
-
... More
Supply and erection of On Load Change over Switch with advance neutral UNIT in sheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-
-
-
-
... More
On Load Change Over Switch Four Pole 100amp., 415volts
1
6209
6209.43
... More
HEAVY GAUGE WELDED CONDUIT PIPES:
-
-
-
... More
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
... More
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan.
50
131
6584.5
... More
LT PANELS & MCCB's (MOULDED CASE CIRCUIT BREAKERS):
-
-
-
... More
LT PANELS:
-
-
-
... More
Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).
Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel.
-
-
-
... More
The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc.
-
-
-
... More
The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.
-
-
-
... More
Painting:- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work . Busbars:-The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.
-
-
-
... More
Metering:-The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:-
-
-
-
... More
LT Panel enclosure having space for 1No. Incomer MCCB 250Amp. and 8Nos. outgoing MCCB's 40amp. to 100amp. according to the requirement at site (Approx. size 1575 x 1700 x 400mm)
1
110807
110807.29
... More
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
51
781
39831
... More
Supply and erection of LED batten 36/40 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
32
1095
35040
... More
Supply and erection of Slim Recessed mounted, Round downlighter 18 watt (including constant LED driver) with Pressure die cast aluminium housing with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
21
1370
28770
... More
Supply and erection of Recessed Mounted 36 Watt LED 2x2 panel (including constant LED driver) with CRCA sheet having efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
4
3952
15808
... More
Supply and erection of High efficiency round highbay 80 Watt Surface mounted Weather proof corrosion resistant, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection) for industrial and other applications in exposed climates requiring higher degree of ingress protection, THD10%, CRI minimum 70, High power LED (with wattage 1 to 5 Watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK 07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
9
8251
74259
... More
Supply and erection of High efficiency round highbay 150 Watt Surface mounted Weather proof corrosion resistant, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection) for industrial and other applications in exposed climates requiring higher degree of ingress protection, THD10%, CRI minimum 70, High power LED (with wattage 1 to 5 Watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK 07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
80
11718
937440
... More
Supply and erection of Well Glass 70 Watt Surface mounted Weather proof corrosion resistant, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection) for industrial and other applications in exposed climates requiring higher degree of ingress protection, THD10%, CRI minimum 70, High power LED (with wattage 1 to 5 Watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK 07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
20
7425
148500
... More
Supply and erection of AC Ceiling Fan 1200mm (48") BEE 3 Star Rating suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer-in-charge at site.
23
3564
81972
... More
Supply and erection of Wall Fan Plastic Body 400MM, 18" including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
10
3428
34280
... More
Supply and erection of Air Circulator 600mm sweep wall mounting to be fitted on wall/ surface etc. making all the necessary connections including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
31
10879
337249
... More
Supply and erection of Heavy duty Exhust Fans 300mm sweep 900RPM complete with aluminium louver shutter Canon Make, double ball bearing, longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
12
4890
58680
... More
Supply and erection of Heavy duty Exhaust Fans 450mm sweep 900RPM complete with aluminium louver shutter Canon Make, double ball bearing, longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
20
6829
136580
... More
Supply and erection of LED Flood Light 120watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab
12
10315
123780
... More
Providing Campus Lighting/ Security Lighting
-
-
-
... More
GI PIPE POLES:
-
-
-
... More
Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required:-
-
-
-
... More
G.I. Pipe Pole 6.1 metre Long, Dia. 80mm, Planting Depth 120cm with Pit Depth 135cm.
7
6061
42431.41
... More
SINGLE ARM BRACKETS FOR GI PIPE POLE:
-
-
-
... More
Supply and erection of G.I. Pipe 40mm dia. (A-class) Single arm bracket of suitable length give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the top of the GI pipe pole having top outer dia. 80mm/100mm with GI reducer of suitable size with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site:-
-
-
-
... More
Single Arm Bracket 1 metre Long with G.I. Reducer 80mm x 40mm
3
1214
3644.37
... More
Single Arm Bracket 1.5 metre Long with G.I. Reducer 80mm x 40mm
4
1398
5593.24
... More
GALVANIZED IRON PIPES AND G.I. EARTHING
-
-
-
... More
Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:-
-
-
-
... More
GI Earth rod 20 mm dia., 3 mtr. Long
7
1274
8923.18
... More
CEMENT CONCRETE MUFFS:
-
-
-
... More
Making of Cement Concrete muff of suitable size and length with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole sufficient to completely flush a SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirming to IS:14772, inner dimensions 250mm x 200mm x 100mm with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's). The SMC Junction Box is to be fixed with the pole by a MS flat clamp of size 20mm x 2mm thick. PVC pipe 40mm dia. (2No.x0.60m) should be provided for incoming and outgoing cables. The outer surface of the muff shall be finished with pure cement & two coats of white snowcem complete in all respect as approved and desired by the Engineer In-Charge at site:-
-
-
-
... More
Cement Concrete Muff of Overall Size 450mm dia., 80cm Long
7
1750
12256.44
... More
PVC INSULATED FR COPPER CONDUCTOR CABLES:
-
-
-
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
Overall size 1.5sq.mm (Un-sheathed)
168
24
4141.2
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):
-
-
-
... More
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
... More
Overall size 10sq.mm (4Core) Un-armoured (Loose)
190
105
20016.5
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
-
-
-
... More
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
... More
Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)
170
133
22744.3
... More
Supply and erection of LED Street Light 45watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED (with wattage 1 to 5 Watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
7
4427
30989
... More
Supply and Erection of LED Post top 40/45 watt Opal Diffuser Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
2
7019
14038
... More
Providing CCTV System
-
-
-
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
... More
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
440
70
31152
... More
Supply & Erection of IP Dome CAMERA 5MP output IP technology True day/ night IR, Smart IR Up to 20-30m IR distance IP66 weatherproof, PoE support, 3.6mm/4mm Fixed lens Third stream: H.265/ H.264/ MJPEG, 5MP, 4MP (2560 × 1440), 3MP (2304 × 1296), 1080P (1920 × 1080), 720P (1280 × 720), D1, 480×240, CIF, Motion Detection, Tampering, Intrusion, User account and password protection, HTTPS, IP Filter, 10 Base-T/100 Base-TX Ethernet (RJ-45) including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
16
8536
136576
... More
Supply & Erection of IP Bullet CAMERA 5MP output IP technology True day/ night IR, Smart IR Up to 20-30m IR distance IP66 weatherproof, PoE support, 3.6mm/4mm Fixed lens Third stream: H.265/ H.264/ MJPEG, 5MP, 4MP (2560 × 1440), 3MP (2304 × 1296), 1080P (1920 × 1080), 720P (1280 × 720), D1, 480×240, CIF, Motion Detection, Tampering, Intrusion, User account and password protection, HTTPS, IP Filter, 10 Base-T/100 Base-TX Ethernet (RJ-45) including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
6
8536
51216
... More
Supply & Erection of 32 Channel IP INPUT 5MP NVR with H.265 & Four-stream video compression Support HD-IP cameras with adaptive access Full channel@1080P resolution real-time recording, HDMI and VGA output at up to 1920×1080P resolution, ONVIF, Gigabit Ports, ); 5 MP,4 MP (2560 × 1440); 3 MP (2048 × 1520); 1080p (1920 × 1080); 720p (1280 × 720); D1 (704 ×576/704 × 480); CIF (352 × 288 / 352 × 240), Network-HTTP, HTTPS, TCP/IP, IPv4/IPv6, Operating Temp-10°C ~ 50°C (14°F ~ 122°F), Smart Phone SupportiPhone; iPad; Android H.265 Decoding 3-stream video compression Support , , Camera title; time; video loss; motion detection; recording, Main output: 1/4/6/8/9/13/16/25/32/36 (live view),Playback at 1080P resolution up to 8-ch synchronous including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
21460
21460
... More
Supply & Erection of 6000GB Audio Video HDD for NVR recording and playback including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
2
16691
33382
... More
Supply & Erection of 8 Port POE 120+ Watts Hardware managed 10/100/1000 Mbps Data switch with 2 Combo 10/100/1000 Mbps copper Port/SFP Port including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
3
10911
32733
... More
Supply & Erection of 43” LED Commercial Panel with 1 HDMI Port, VGA Input including warrenty and service for three years complete in all respect as desired by the engineer in charge at site.
1
56274
56274
... More
Supply & Erection of 2 meter long superior quality HDMI Cable including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
477
477
... More
Supply & Erection of RJ-45 Male connector including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
50
19
950
... More
Supply & Erection of 9U Wall mount 19’’ Rack with glass door, lock & key facility 400mm depth Fan including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
2
11865
23730
... More
Supply & Erection of 1000VA LIT sine wave UPS/ Power Plant with SMF batteries having 30 Minutes backup time including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
2
15306
30612
... More
Supply & Erection of CAT6 UTP Networking Cable of 10/100/1000Mbps DCC in existing PVC conduit including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
506
48
24288
... More
Providing PA System (Sound System)
-
-
-
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
... More
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
250
70
17700
... More
Supply & Erection of Advanced PA Amplifier with Built-in-Digital Player System comprises of following features:-
● 220V AC & 12V DC operation
● 700 watt PA Amplifier
● 6 Mic & 2 Aux input
● MP3 Recorder & player
● USB & Card Reader
● Remote control
● Intelligent sound reinforcement
● Speaker output @ 4Ω 8 Ω & 70V /100V
● Active Bass & Treble Control
● LED Display with Multimedia control including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
61997
61997
... More
Supply, Installation, Testing and Commissioning of 60 Watt WAll Speaker 100V Line Support Woofer 163mm (6½”), Tweeter 25mm (1”), Easy power tap selection through a slotted rotary switch knob at the rear. power taps of 60W, 40W, 30W, 20W &10W. Frequency Response 50-20,000Hz including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
10
9061
90610
... More
Supply, Erection, Testing and Commissioning of 16 ZONE Selector Having following features:-
● 16 Zone Selector Switcher.
● All Call feature
● 230V AC Inbuilt Power Supply.
● LED Indication.
● 19’’ Rack mountable
● Amplifier Input
● 100V
including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
14307
14307
... More
Supply & Erection of 18” Gooseneck Microphone with stand having on/off switch and 10 meter long Twin core shielded low noise with XLR connector including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
2
6200
12400
... More
Supply & Erection of VHF/UHF wireless Microphone with battery on/off switch long Range Remote base unit and Adaptor including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
2
6200
12400
... More
Supply & Erection of 15U 19’’ Rack with glass door, lock & key facility minimum 400mm depth. with CPD, Cable Manager & Fan including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
1
14307
14307
... More
Supply, Installation, Testing and Commissioning of 2 Core Copper superior quality 1.5mm sq including warrenty and service for one years complete in all respect as desired by the engineer in charge at site.
280
43
12040
... More
Supply, Erection, Testing and Successful Commissioning of Diesel Generating Set 40 KVA with Manual Control Panel
-
-
-
... More
Supply, Erection, Testing and Commissioning of Water Cooled Silent DG Set 40KVA with Manual Control Panel, Three Phase, 415Volts, 50Hz, 1500 RPM Silent (Sound Proof) Diesel Generator Set. It should be Water cooled naturally aspirated/ turbo charged/ turbo charged after cool (As per manufacturer standard). ENGINE: The Diesel engine developing suitable BHP for giving a power rating as per ISO 8528- Part-1 (With CPCB-IV Norms) in KVA at the load terminals of alternator at 1500 rpm at actual site conditions. The engine shall confirm to IS 10000/ ISO 3046/ BS: 649/ BS 5514 amended up to date have dynamically balanced Fly wheel, air cleaner (dry/ oil bath type) as per manufacturer standard. A electronic governor of TYPE A1 AND A2 to maintain engine speed at all conditions of load, daily fuel service tank of minimum 8 hours running capacity as per manufacturer standard, Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level.suitable self-starter for 24 V DC, battery charging alternator unit and voltage regulator, Lubrication oil cooler, Lubrication oil filters with replaceable elements.
1
870666
870666
... More
ENGINE CONTROL PANEL: Engine control panel fitted and having digital display i.e Start/stop key switch/push button, Battery charging indication,Engine Hours indications, Over speed indication, High water temperature indication, Lubricant oil pressure indication,) RPM indication.
ALTERNATOR: The alternator should be designed as per (IS4722 and IEC:34 ) standard. Rated Power Factor : 0.8 (lag), Rated voltage : 230/415 volt, SPDP (Screen Protected Drip Proof), Degree of protection: IP-23, Ventilation : Self ventilated air cooled
-
-
-
... More
Alternator should have 40 degree maximum class H insulation, Automatic voltage regulator unit should be provided as per standard practice of manufacturer. Its voltage dip shall not exceed more than 20% of the rated voltage at any step load or transient load as per ISO 8528 (Part-1). Its efficiency at full load 0.8 power factor, 10% overload one hour in every 12 hrs of continuous use.
ACOUSTIC ENCLOSURE: The enclosure shall be fabricated out the CRCA sheet of thickness not less than 1.6 mm on the outside cover with inside cover having not less than 0.6 mm thick perforated powder coated CRCA sheet. It should be IP54 Suitable for outdoor installation exposed to weather conditions, noise level up to 75 dB (A). All sheet metal parts should be processed through 7-tank pre treatment process and batteries accommodated in the battery rack .The acoustic lining should be made up of high quality insulation material i.e. Rockwool / glass/ mineral wool / PU foam of appropriate thickness & density for sound absorption.The inside of enclosure should be provided with at least one no. 28 W-T5 fluorescent tube light/ LED 10Watt luminaries controlled by a 5A switch for adequate lighting during servicing etc.
-
-
-
... More
MANUAL CONTROL PANEL: Manual control panel shall be fabricated out of 1.6 mm sheet steel, totally enclosed, dust, damp and vermin proof enclosed inside canopy with IP-53 degree of protection & front operated, composite meter for digital display, HRC fuses of suitable rating. MCCB (Fixed Thermal and Adjustable Thermal protection)/ ACB (Over cuurent/ overload, shorcircuit, instantenous, earth fault protection) should be used. Battery charger complete with voltage regulator, Voltmeter and Ammeter for charging the battery from external mains. This will be in addition to the battery charging alternator or dynamo fitted on the engine.All the components in the control panel shall be properly mounted, duly wired and labeled. Suitable terminals are to be provided for panel incoming and outgoing connections. System opeartion facility provided shall afford the following operational requirements. Necessary instruments and accessories such as voltmeter, power factor meter, KW meter, KWH meter, Ammeter, Frequency meter,battery charger complete in all respect as desired by engineer at site.
-
-
-
... More
Making Reniforced Cement Concrete Foundation of size 3500mmX1800mmX650mm for DG set 40 KVA with Manual Control Panel with 200mm below ground level and 450mm above ground level. The foundation includes Earth work in excavation in foundations trenches etc., Cement Concrete 1:4:8 with stone ballast, Shuttering for faces of concrete fouundations and foundations beam & plinth beam, Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator, Cold twisted deformed (Ribbed/tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works including bending and placing in position complete and finished with 12.5 mm thick cement plaster 1:5. Includes also Bolt and nuts of all sizes and length required and Cost of Shed with angle iron / MS Channel & Fiber sheet completer in all respect as per site requirement to cover the DG Set
1
43458
43458
... More
Supply of Diesel to Start and Testing of DG Set
100
86
8638
... More
XLPE INSULATED UNARMOURED CABLES (LOOSE):
-
-
-
... More
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
... More
Overall size 25sq.mm (3½ Core) Un-armoured (Loose)
50
164
8230.5
... More
Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-
-
-
-
... More
Aluminium thimble cable Core size 10-16sq.mm
2
14
29.5
... More
Aluminium thimble cable Core size 25-35sq.mm
6
17
107.46
... More
Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections:-
-
-
-
... More
Brass Gland for Aluminium cable 2/3/3½/4 Core size 25-35sq.mm
2
144
288.24
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
-
-
-
... More
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
... More
Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.)
40
133
5351.6
... More
COPPER EARTHING:
-
-
-
... More
COPPER EARTHING (Upto 14 metre in Length):
-
-
-
... More
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
4
18663
74653.52
... More
COPPER EARTHING STRIP (As Additional Length):
-
-
-
... More
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
-
-
-
... More
Additional Length 20mm x 3mm thick Copper Tape
20
517
10353.8
... More
Providing Early Streamer Emission Lightning Arrestor System
-
-
-
... More
Supply, Erection, Testing & Commisioning of Early Streamer Emission (ESE) type Lightning Protection Complete with Lightning Air Terminal. The System should be corrosion resistant stainless steel chrome body capable of working in hazardous atmosphere and protecting against direct LIGHTNING point as well conducting /diverting it to earth completely after tracing the LIGHTNING in advance.As per NF C 17-102:2011 the air terminal should be tested for LIGHTNING impulse current (10/350 micro sec)=100 KA and for local certification the air terminal should be tested for switching impulse current of 40 KA (8/20 micro sec) as per CPRI with 5 positive and 5 negative impulse. The ESE Terminals shall offer a protection radius of 107mtr High Protection and preferably to be mounted on roof top and center of the building / blocks with the highly insulated polyplastic adaptor with the Mast. Protection radius of 79 meter at Level 1 & 107 meter at level 4 complete in all respects as approved and desired by the Engineer-in-charge of the work.
1
75937
75937
... More
Supply and fixing of GI Mast 5 mtr height along with suitable base plate for mounting the terminal along with highly insulated adopter to mount ESE Air Terminal with the Mast.The Adapter shall have suitable Metal connector / Connecting point in such a way the top portion shall be electrically connected to the central tip of the ESE terminal and bottom portion connected to the down conductor, stray wires along with support shall be securely fixed with base plate and gauge wires where ever required complete in all respects as approved and desired by the Engineer-in-charge of the work.
1
9997
9997
... More
Supply and Installation of Lightning Strike Counter (minimum 6 digit display) of non-resettable (electromechanical) type which allows the automatic counting of the strikes received by the lightning protection system.This information is used to enhance lightning protection security & increase the effectiveness of inspection & maintenance procedures.It should be in IP-65 enclosure with minimum sensitivity of 1KA and maximum capacity 100KA. No external power source is required. It should be installed always 2 mtrs above the ground level complete in all respects as approved and desired by the Engineer-in-charge of the work.
1
9163
9163
... More
Supply, Installation & Testing of Chemical Earthing (Maintenance Free Earthing) System with UL Approved Copper Bonded Rod and exothermically welded Cu Busbar both tested by CPRI at 50kA Fault Current. A Copper bonded steel rod shall have 3000 mm length and 17.2 mm dia. with copper bonding thickness of minimum 250 microns. Along with Earth enhancement compound tested by ROHS complying IEC 62561-7 in a sealed bag of minimum 50 kg (25 kg Bag x 2). A Copper clad steel solid ground wire of 8 mm dia. For interconnecting earth pits including earth pit covers is required.Each earth pit shall be covered with heavy duty weather proof environment friendly polyplastic earth pit chamber.The grounding minerals should not be pollute the ground water.The grounding minerals shall be tested & certified for the resistivity of less than 0.12ohm mtr complete in all respects as approved and desired by the Engineer-in-charge of the work.
3
8187
24561
... More
Supply & erection of Test Link of non-corroding,weather proof, water proof polycarbonate IP 65/55 enclosure including providing of 2 nos. of insulated supports with suitable holes prefitted nuts & bolts to fix the down conductor & earth wire.The transparent cover fitted at approximately 500-1000mm from ground level shall be provided on each down conductor complete in all respects as approved and desired by the Engineer-in-charge of the work.
1
1776
1776
... More
Cost of Pole Foundation with earth work in excavation in foundations trenches etc. 0.25 meter below ground level, Cement Concrete 1:4:8 with stone ballast, Reinforced cement concrete M-20, Cold twisted deformed (Ribbed/ tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008 complete in all respect as desired by engineer in charge.
4
3057
12228
... More
Supply & erection of PVC insulated PVC sheathed Single Core Copper conductor (unarmoured) cable working voltage 1100volts grade 70sq.mm (1 Core) exists in pipe/ on surface on wall complete in all respects as approved and desired by the Engineer-in-charge.
100
707
70700
... More
Providing Solar Power Generation System 5KW
-
-
-
... More
Supply, Installation, testing & Commissioing of Grid interactive PV System Solar Power Plant (i.e connected to utility grid) of Minimum 5KW including required quantities of SPV modules (High power density Perc Monocrytalline based single module of capacity +400 watt) formed into arrays, their mounting arrangement, Power conditioning units (i.e String Solar Inverter), required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board through Cable tray, Bi Directional Energy Meter, Required Chemical Earthing with copper bonded rods (i.e. 1 No for GI Structure, 2 Nos. for String Inverter, AC & DC Distribution System), Provision of Lightening Arrestor & 2 Nos. chemical earthing with copper bonded rods. Hot dip galvanized MS Mounting Structures should be designed to withstand the speed for the wind Zone of the location (150 Km/hr-170 Km/hr) Complete in all respect with transportaion, fabrication, labour & Civil Work etc.
-
-
-
... More
Features:- (1) Solar PV Module Warranty 25 Years & Certified Under IS/IEC 61730 I & II, IS/ IEC 61701 & IS/IEC 14286 & IES 61215, BIS Certificates and MNRE, GOI Latest Specifications/ Standards (2) Power Conditioning Unit (String Solar Inverter) & Certified under IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-3, IS/IEC 61683, EN 50530, IEC 60068-2-1, 2, 14, 30, EN 60529, IES 60947 Part I,II & III, IS 60947 Part I & II, IES 60227/ IS694, IES 60502/ IS1554/ BIS Standard and MNRE, GOI Latest Specifications/ Standards (3) Structure : 25 Years Service Life with AMC & Certified under IS 2062:2011
(4) Complete Plant Insurance for the period of 5 Years (Excluding Theft of the material) (5) Annual Maintenance Contarct for the period of 5 Years The Work will got done from approved MNRE (Ministry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency) PWD Contractors.
5
56463
282315
... More
Public Health
-
-
-
... More
Sub Head-1 Tubewell
-
-
-
... More
Boring with casing pipe for tubewell in allsoils except ordinary hard rocks requiringblasting including removing the casing pipeafter the tube well is lowered & tested ,equipment as requried such as hand boringmachine and its accessory, transportation to site and vice versa etc. complete in all respect.
-
-
-
... More
Boring with 200mm id Housing Pipe Upto 150 m depth BGL
100
954
95452
... More
Boring with 150mm id Housing Pipe Upto 150 m depth BGL
100
926
92660
... More
Supplying, assembling, lowering and fixing invertical position in bore well ,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818-2010, including required hire and labour charges, fittings & accessories etc. all complete, for all
depths, as per direction of Engineer – incharge.
100 mm nominal size dia
185
522
96671.75
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer-in-charge.
100 mm nominal size dia
15
666
9995.4
... More
Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect.
100mm internal diameter
1
272
272.11
... More
Providing and installing submersible motor 2.00 HP alongwith assembly, ncluding electrical connections complete in all respects.
1
24579
24579
... More
Supplying, lowering of 50 mm dia GI double flanged column pipe as per ISI marked (IS 1239) including cost of specials such as sockets, cutting and threading and welding etc Complete in all respects
50mm i/d
85
721
61361.5
... More
Providing & installation of Automatic on/of Controller make L&T, Boparai or its equivalent
1
5462
5462
... More
Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-incharge.
8
1907
15263.92
... More
Submersible Cable 2.5mm complete in all respect
170
104
17695.3
... More
Supplying & fixing of M.S Clamp of size
150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.
1
2816
2816.25
... More
Collection of water sample from differentstrata and testing of sample from approvedlaboratory (Phisical & chemical Analysis
5
295
1476.9
... More
Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)
5
5981
29907.2
... More
Sub Head-2 Estate Water Supply
-
-
-
... More
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
Earth work upto 1.5 m. Depth All classes of soil except rocky For 50mm pipe line
66
104
6890.4
... More
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete
50mm i/d
43.14
861
37152.17
... More
Providing, fixing and jointing GI Union Couplings with GI Pipes complete in all respect.
50mm i/d GI. Union
2
437
875.36
... More
Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
50mm i/d Gun Metal peet valve heavy pattern.
1
2536
2536.22
... More
Sub Head-3 Internal Water Supply System
-
-
-
... More
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
... More
Detail attached as per Table-2
-
-
-
... More
SDR 11 CPVC pipes & fittings 20mm o/d
85
233
19821.15
... More
CPVC SDR 11 Pipe & fitting 25mm o/d
87
301
26190.48
... More
CPVC SDR 11 Pipe & fitting 40mm o/d
58
532
30873.4
... More
CPVC SDR 11 Pipe & fitting 50mm o/d
46
790
36384.16
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition.
Size 75mm x 75mm
qty same as cpvc Pipe 20mm i/d to 40 mm
230
72
16718.7
... More
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
... More
Through wall 11.43 cm thick Detail as per Table-2
31
176
5469.02
... More
Through wall 22.86 cm thick Detail as per Table-2
26
251
6544.46
... More
Providing, fixing and jointing CPVC Union Couplings with Cpvc Pipes complete in all respect.
-
-
-
... More
20mm i/d cpvc. Union
3
165
495.39
... More
25mm i/d cpvc Union
-
-
-
... More
40mm i/d cpvc Union
10
370
3703.5
... More
50mm i/d cpvc Union
4
476
1905.12
... More
Providing, fixing and jointing CPVC Ball valve on CPVC Pipe Lines Including All carriages
-
-
-
... More
20mm i/d Ball valves
2
436
873.1
... More
25mm i/d Ball valves
-
-
-
... More
40mm i/d Ball valves
5
1264
6320.6
... More
50mm i/d Ball valves
2
2091
4183.34
... More
Sub Head-4 Internal Sewerage System
-
-
-
... More
Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
Single Socket Type B
qty as per Table -1
-
-
-
... More
110mm o/d SWR UPVC pipe lines laid complete
165
396
65366.4
... More
90mm o/d SWR UPVC pipe lines laid complete
218
344
75142.42
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
qty as per Table Table-1
-
-
-
... More
For 110mm i/d pipes Elbow 90 Degree (All side socketed)
22
162
3576.54
... More
Vent Cowls
3
45
136.2
... More
Coupler
26
111
2888.34
... More
Single Tee With Door
9
236
2126.88
... More
P Trap/Floor Trap 110mm x 110mm
4
338
1353.52
... More
Floor Trap 110mm x 90mm With 90mm i/d outlet deep seal at Ground Floor
34
309
10539.66
... More
For 90mm i/d pipes Elbow 90 degree (all side socket)
16
120
1933.6
... More
Vent Cowls
3
37
112.89
... More
Coupler
26
109
2842.58
... More
Single Tee With Door
10
216
2168
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
110mm o/d
251
101
25418.77
... More
90mm o/d
183
85
15684.93
... More
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
M.S. Holder bats clamps for 100mm i/d as per table-1
55
217
11944.9
... More
M.S. Holder bats clamps for 75mm i/d as per table- 1
73
202
14807.32
... More
Providing and fixing in position PVC gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
100mm internal Diametre PVC.gully trap with and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
15
2339
35091.9
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
5
6780
33901.65
... More
Sub Head - 5 Sanitary Installation
-
-
-
... More
Providing and fixing in position Chinaware Indian Orisa water closet size 580 x 440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer- in-charge.
2
5607
11215.56
... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
16
5035
80571.68
... More
Providing and fixing jet spray with 2'-6" long PVC pipe.With C.P Brass nut
16
381
6101.92
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
20
87
1748.8
... More
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm ,
C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube
connection 300 mm long complete.
12
6901
82817.76
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
Size 49 cm dia (above counter round)
14
4961
69467.86
... More
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
14
1013
14188.58
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
PVC tube connection of size 15 mm x 450 mm with CP Brass nut
45
191
8628.3
... More
Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.
26
119
3095.3
... More
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in- charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
C.P brass towel ring
14
959
13436.36
... More
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
14
888
12433.4
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in- charge )complete in all respect.
C.P. brass Bib cock long nose/ long body without flange
2
1214
2429.38
... More
C.P Brass bib cock foam flow without flange
19
966
18355.14
... More
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
C.P.brass 15mm Angle valve without flange
45
870
39158.55
... More
C.P.brass 15mm Concealed stop cock with flange
17
1268
21562.97
... More
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures
complete in all respect.
83
66
5508.71
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.
C.P. Brass extension piece, 25mm long to 50mm long
40
112
4508.8
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
14
1263
17684.1
... More
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
10
386
3866.3
... More
Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval of Engineer-in-charge) of size 600 mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect.
7
510
3575.88
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
Tripple Layer Tanks 2000 ltr Capacity
9000
11
102420
... More
Providing and fixing in position automatic brass Ball Cock in tanks.
Brass Ball Cock with rod and Plastic Ball 25mm i/d
7
950
6656.86
... More
Providing, fixing and jointing CPVC Tank nipple in HDPE Water Storage Tanks . Complete in all respect. Cpvc. tank nipple 25mm i/d
20
236
4734.6
... More
Cpvc tank nipple 40mm i/d
10
404
4041.1
... More
Construction of Plateform complete as per specification & as desired by Enginer-in-charge For 1000 ltr Water Tank
1
4809
4809.23
... More
For 2000 ltr Water Tank
4
7790
31162.52
... More
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects
47
116
5479.26
... More
Vitreous white Chinaware Partition Large partition size 75 x 16.5 x 36.5 cm
12
4900
58810.56
... More
Sub Head-6 Flooring and Wall Tile
-
-
-
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
102
424
43305.12
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
20
155
3118.4
... More
Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete .
123
889
109365.45
... More
Extra rate for First Floor
20
3
63.2
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area.
iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
Area same as screed of all the floors
20
527
10547.2
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/ Glosy/ Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
431
898
387313.84
... More
Extra Rate for First Floor
64
3
202.24
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
11
3453
37987.07
... More
Extra labour for projected nosing of stair case of any shape and design
15
67
1011.3
... More
Sub Head -7 Drinking Water Cooler
-
-
-
... More
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer
2
37590
75181.98
... More
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140- 260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:- Automatic Voltage Stablizer 2 KVA
2
5008
10016.88
... More
Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
2
40226
80453.68
... More
Sub Head-8 Estate Sewerage
-
-
-
... More
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
110 mm o/d pipes
55
599
32957.65
... More
160 mm o/d pipes
122.61
1253
153678.15
... More
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L.
For all classes of soil except rocky
103.05
121
12484.51
... More
Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard
Inside size 75x120 cm and 120 cm deep
7
19004
133028.63
... More
Fire Extinguishers
-
-
-
... More
Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
4.5kg capacity
6
7150
42901.14
... More
Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
4 Kg. Capacity
6
2276
13661.22
... More
Sub Head 10 Air Conditioning
-
-
-
... More
Providing & Installing & Erection split type wall mounted air conditioner capacity
2.0 tonne 5 Star Make:- Toshiba, Mitsubishi Electric, Daikin, O' General, Hitachi, voltas with arrangement for installing OD units on terrace including 3 mtr inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
1
74155
74155
... More
Providing laying hard soft copper concealing of copper pipes of dia 12.7mm od (insulation = 13mm)/9.5mm od (insulation = 13m) as per requirement and wall thickness 0.8mm, insulated, 4mm electric wire sheathed 3 core double insulated / taping laying in chase cutting of wall and repairing the same within the building and installing charges complete in all respects.
10
1229
12290
... More
Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
Overall size 2.5sq.mm (50/0.25mm), 3Core
10
80
800.7
... More
AUTOMATIC VOLTAGE STABLIZER,TIMER:
-
-
-
... More
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having
main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size.
There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:
Automatic Voltage Stablizer 5 KVA
1
8191
8191.28
... More
Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.
uPVC Pipe 6 Kgf/cm2
10
260
2608.7
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%