Public Works Department Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 2,31,000Document Cost
₹ 10,000Tender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEPW_135216_1Tender No
Bid No 39 Dt. 13-02-2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
14.19
6384
90590.38
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
20.89
221
4620.87
... More
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
1.43
5803
8298.29
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
1.7
66
112.88
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure
23.44
7174
168163.25
... More
Extra Rate for First Floor
9.14
190
1743
... More
Extra Rate for Mumty Floor
5.16
381
1968.02
... More
Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.
287.56
426
122693.23
... More
Extra Rate for First Floor
95.68
10
1008.47
... More
Extra Rate for Mumty Floor
45.24
21
953.21
... More
Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
1.12
400
448.34
... More
Extra Rate for First Floor
0.56
10
5.88
... More
Beams
15.04
400
6020.51
... More
Extra Rate for First Floor
7.52
10
78.96
... More
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
19.05
560
10677.53
... More
Extra Rate for First Floor
6.35
10
66.68
... More
Extra Rate for Mumty Floor
6.35
21
133.99
... More
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
41.51
7876
326970.12
... More
Extra for First Floor
11.08
13
151.8
... More
Extra for Mumty Floor
5.86
27
160.56
... More
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
7.88
5947
46864.72
... More
Extra for First Floor
3.57
153
549.07
... More
Extra for Mumty Floor
0.74
307
227.62
... More
12.5 mm thick cement plaster 1:5
48.61
198
9641.02
... More
Extra for First Floor
22.68
2
47.63
... More
Extra for Mumty Floor
3.25
4
13.65
... More
20mm thick cement plaster 1:5 in two coat work
112.63
271
30601.57
... More
Extra for First Floor
45.49
2
95.53
... More
Extra for Mumty Floor
21.65
4
90.93
... More
White washing (two or more coat)
87.93
11
1019.99
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
161.24
84
13589.31
... More
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge
19.05
297
5659.76
... More
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
67.66
22
1496.64
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
67.66
79
5345.14
... More
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
112.63
126
14238.68
... More
IPHL :- Dismantling brick work tile, masonry or tile lining in cement
26.66
718
19155.21
... More
Dismantling Reinforced Cement Concrete
1.98
2321
4597.36
... More
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
8.4
5947
49957.32
... More
Extra for First Floor
8.4
153
1291.92
... More
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure
135.36
801
108522.17
... More
Extra for First Floor
135.36
15
2138.69
... More
Dismantling glazed tiles (to be carefully removed) Considering breaking of ceramic wall tiles due to construction of new walls and shelves.
203.27
133
27195.49
... More
12.5 mm thick cement plaster 1:5
172.13
198
34138.54
... More
Extra for First Floor
172.13
2
363.19
... More
20mm thick cement plaster 1:5 in two coat work
172.13
271
46767.72
... More
Extra for First Floor
172.13
2
363.19
... More
Scraping White wash and Colour wash
1513.08
7
11151.4
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
646.88
84
54519.05
... More
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
646.88
22
14308.99
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
1857.34
79
146748.43
... More
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
976.7
126
123474.41
... More
Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base. Considering breaking of vitrified tiles due to erection of new walls
226.12
114
25965.36
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate to be laid below the topping using mechanical mixer for mixing of material
226.12
220
49949.91
... More
Extra for 1st Floor
226.12
3
714.54
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make an ideal choice for high traffic zones.) Size 600x600 mm
185.01
1508
279089.44
... More
Kotah stone rough dressed 40mm to 50mm thick slabs, set to pattern in pavements over 20mm thick base of cement mortar (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone
41.11
1256
51636.22
... More
Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing
4.11
1414
5811.83
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) :
23.48
370
8707.09
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
37.64
387
14592.65
... More
Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work.
61.12
71
4378.64
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness
3.72
1090
4056.18
... More
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)
3.76
116
439.69
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
1
209
209.65
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side.
1.95
1209
2358.37
... More
Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded).
205.95
422
87003.58
... More
Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge.
518.12
1298
673022.34
... More
Providing and fixing tiled false ceiling at height upto 4 mtr of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending.) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge
46.61
1300
60593.93
... More
Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.
8
234
1879.44
... More
Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. Door and window frame of size 113mmx60mmx
with 35mm wide single rebate
91.92
783
72046.9
... More
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position. Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges: 35mm thick
36.7
2430
89196.41
... More
Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.
123.57
67
8331.09
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm
18
209
3773.7
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete. I.S.I Designation No. III (size of door 851mm to 1000mm)
19
1380
26221.71
... More
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). For shutter area above 0.50 sqm
40.49
116
4734.9
... More
Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
(a) Windows Outer frame of size 72mmx55mm and central mullion 72mm x 50mm with Double rebate.
20.35
963
19603.56
... More
Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, Cillral mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitred and electrically flash-welded, with iron fittings incluidng necessary iron handles,hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire guage) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire guage and grill will be paid as per respective items)
61.2
134
8252.82
... More
Wire gauge fixed on steel windows of standard rolled steel section, with 3mm thick flat iron cover moulding of 12.5mm width, fixed with machine screws, complete in all respects.
1.9
795
1511.24
... More
Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect Glazing area above 0.09 sqm
3.79
813
3082.41
... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
3.79
25
95.81
... More
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
0.82
10661
8742.27
... More
Providing Polyester Powder coating 60 to 70 micron any coloured specified to M.S Grill section of various sizes including carriage of material from market to workshop & workshop to site of work.
81.6
27
2235.02
... More
115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure
27.88
743
20736.87
... More
Extra Rate for First Floor
27.88
15
440.5
... More
Reinforced cement concrete M-20 mechanically batchmixed using batch type concrete mixer asper IS:1791andvibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
12.04
6904
83130.18
... More
Lintel Beams
0.4
6904
2761.8
... More
Extra Rate for First Floor
12.44
190
2372.06
... More
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
222.74
560
124836.86
... More
Extra Rate for First Floor
222.74
10
2347.68
... More
Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
3.2
400
1281.06
... More
Extra Rate for First Floor
3.2
10
33.73
... More
Cold twisted detormed (Ribbed/Tor steel) Bars (Fe 500 grade as per IS 1786-2008), for R.C.C works, where not including in the complete rate of RCC including binding,bending and placing in position complete
2.58
7876
20322.43
... More
Extra Rate for First Floor
2.58
13
35.35
... More
12.5 mm thick cement plaster 1:5
27.88
198
5529.44
... More
Extra Rate for First Floor
27.88
2
58.83
... More
20mm thick cement plaster 1:5 in two coat work
27.88
271
7575
... More
Extra Rate for First Floor
27.88
2
58.83
... More
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge
55.76
297
16566.3
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
17.03
3461
58941.17
... More
Extra for 1st Floor
17.03
3
53.81
... More
Extra labour for projected nosing of stair case of any shape and design.
103.7
67
6991.45
... More
Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.
90.23
67
6083.31
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
303.32
744
225685.25
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
7.88
906
7141.49
... More
Extra for First Floor
7.88
3
24.9
... More
Providing and fixing commercial plywood 18mm thick
385.52
1315
507274.93
... More
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
678.62
45
30741.49
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
678.62
29
20019.29
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
682.41
69
47447.97
... More
Providing & Fixing decorative high pressure laminated sheet 1mm thick High Class Texture with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, ISI marked complete in all respect as per the directions of Engineerin-charge.
9.07
1445
13109.78
... More
Providing & Fixing decorative high pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
8.03
1171
9407.06
... More
Providing and fixing telescopy 18'' complete
6
370
2220
... More
Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge
168
90
15220.8
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete in all respect as per the directions of Engineer-in-charge. 65mm
6
223
1340.04
... More
Providing and fixing telescopy 90 degree kabza (Auto Hinge) complete
235
340
79900
... More
Providing and Fixing of Hermatically Sealed Door (Stainless Steel Grade 304) complete in all respects upto to the entire satisfaction of the Engineer-In-Charge of the work (Size: 3.5' x 6.75')
3
92309
276928.23
... More
Credit of Materials:- Bricks from dismantling of Brick Work
7680
3
-23040
... More
Brick Bats
11
531
-5841
... More
Public Health Services
-
-
-
... More
Sub Head-1 Estate Water Supply:- Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete
50mm i/d
10
861
8612
... More
Providing, fixing and jointing GI Union Couplings with GI Pipes complete in all respect.
50mm i/d GI. Union
4
437
1750.72
... More
Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
50mm i/d Gun Metal peet valve heavy
pattern.
2
2536
5072.44
... More
Sub Head-2 Internal Water Supply System
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
SDR 11 CPVC pipes & fittings 20mm o/d
52
233
12125.88
... More
CPVC SDR 11 Pipe & fitting 25mm o/d
15
301
4515.6
... More
CPVC SDR 11 Pipe & fitting 40mm o/d
7
532
3726.1
... More
CPVC SDR 11 Pipe & fitting 50mm o/d
112
790
88587.18
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
qty same as cpvc Pipe 20mm i/d to 40 mm
186
72
13520.34
... More
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
Through wall 11.43 cm thick Detail as per Table-2
27
176
4763.34
... More
Through wall 22.86 cm thick Detail as per Table-2
27
251
6796.17
... More
Providing, fixing and jointing CPVC Union Couplings with Cpvc Pipes complete in all respect.
20mm i/d cpvc. Union
27
165
4458.51
... More
25mm i/d cpvc Union
7
211
1480.22
... More
40mm i/d cpvc Union
7
370
2592.45
... More
50mm i/d cpvc Union
5
476
2381.4
... More
Providing, fixing and jointing CPVC Ball valve on CPVC Pipe Lines Including All carriages 20mm i/d Ball valves
20mm i/d Ball valves
11
436
4802.05
... More
25mm i/d Ball valves
7
635
4446.19
... More
40mm i/d Ball valves
1
1264
1264.12
... More
50mm i/d Ball valves
11
2091
23008.37
... More
Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
Single Socket Type B
110mm o/d SWR UPVC pipe lines laid complete
80
396
31692.8
... More
90mm o/d SWR UPVC pipe lines laid complete
104
344
35847.76
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm i/d pipes, Elbow 90 Degree (All side socketed)
42
162
6827.94
... More
Vent Cowls
4
45
181.6
... More
Coupler
34
111
3777.06
... More
Single Tee With Door
21
236
4962.72
... More
P Trap/Floor Trap 110mm x 110mm
1
338
338.38
... More
Floor Trap 110mm x 90mm
With 90mm i/d outlet deep seal at Ground Floor
21
309
6509.79
... More
For 90mm i/d pipes, Elbow 90 degree (all side socket)
21
120
2537.85
... More
Vent Cowls
13
37
489.19
... More
Coupler
29
109
3170.57
... More
Single Tee With Door
29
216
6287.2
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
110mm o/d
273
101
27646.71
... More
90mm o/d
219
85
18770.49
... More
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste,vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
M.S. Holder bats clamps for 100mm i/d as per table-1
27
217
5863.86
... More
M.S. Holder bats clamps for 75mm i/d as per table- 1
35
202
7099.4
... More
Providing and fixing in position PVC gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
100mm internal Diametre PVC.gully trap with and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
13
2339
30412.98
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
7
6780
47462.31
... More
Providing and fixing in position Chinaware Indian Orisa water closet size 580 x 440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer- in-charge.
1
5607
5607.78
... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
5
5035
25178.65
... More
Providing and fixing jet spray with 2'-6" long PVC pipe.With C.P Brass nut
5
501
2507.35
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
40
87
3497.6
... More
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm ,
C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube
connection 300 mm long complete.
1
6901
6901.48
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
Size 49 cm dia (above counter round)
2
4961
9923.98
... More
Size 550 mm x 400 mm x 815mm
2
3807
7614.7
... More
Providing and fixing in position vitreous
Chinaware white laboratory sinks of approved make (to the approval of Engineer-in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect.
Size 470mmx370mmx180mm
11
6769
74467.69
... More
Providing and fixing in position C.P elbow
action pillar tap of approved make (to the
approval of Engineer-in-charge) complete in all respect.
11
2222
24451.79
... More
Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
2
1013
2026.94
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
PVC tube connection of size 15 mm x 450 mm with CP Brass nut
29
191
5560.46
... More
Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.
16
119
1904.8
... More
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in- charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
C.P brass towel ring
15
959
14396.1
... More
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
15
888
13321.5
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in- charge )complete in all respect.
C.P Brass bib cock foam flow without flange
6
966
5796.36
... More
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
C.P.brass 15mm Angle valve without flange
27
870
23495.13
... More
C.P.brass 15mm Concealed stop cock with flange
For Jet Spray Connection + Over Head Shower
5
1268
6342.05
... More
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures
complete in all respect.
60
66
3982.2
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.
C.P. Brass extension piece, 25mm long to 50mm long
60
112
6763.2
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
8
1263
10105.2
... More
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
2
386
773.26
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
Tripple Layer Tanks
12000
11
136560
... More
Providing and fixing in position automatic brass Ball Cock in tanks.
Brass Ball Cock with rod and Plastic Ball 25mm i/d
6
950
5705.88
... More
Providing, fixing and jointing CPVC Tank nipple in HDPE Water Storage Tanks . Complete in all respect. Cpvc. tank nipple 25mm i/d
20
236
4734.6
... More
Cpvc tank nipple 40mm i/d
10
404
4041.1
... More
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
For 2000 ltr Water Tank
6
7790
46743.78
... More
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects
22
116
2564.76
... More
Vitreous white Chinaware Partition
Large partition size 75 x 16.5 x 36.5 cm
1
4900
4900.88
... More
Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect.
25 litre capacity water heater
9
9324
83916.54
... More
Sub Head-5 Flooring and Wall Tile
-
-
-
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of
material
28
155
4365.76
... More
Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement
: 4 Fine sand) for new flooring complete .
28
889
24896.2
... More
Extra rate for First Floor
28
3
88.48
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area.
iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
28.08
527
14808.27
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/ Glosy/ Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
194.4
898
174695.62
... More
Extra Rate for First Floor
194
3
613.04
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
90.18
3453
311424.91
... More
Extra labour for projected nosing of stair case of any shape and design
119
67
8022.98
... More
Sub Head -6 Drinking Water Cooler
-
-
-
... More
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer
2
37590
75181.98
... More
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140- 260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2 KVA
2
5008
10016.88
... More
Providing & fixing in position Commercial ROwithout reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
11
40226
442495.24
... More
Sub Head-7 Estate Sewerage:- Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
110 mm o/d pipes
53
599
31759.19
... More
160 mm o/d pipes
105.72
1253
132508.39
... More
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
For depth exceeding 3.0 m but not xceeding 4.5 m B.G.L. For all classes of soil except rocky
90.36
121
10947.11
... More
Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard Inside size 75x120 cm and 120 cm deep
7
19004
133028.63
... More
Sub Head 8
Fire Extinguishers
-
-
-
... More
Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 4.5kg capacity
6
7150
42901.14
... More
Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.4 Kg. Capacity
6
2276
13661.22
... More
Sub Head 9 Air Conditioning
Providing & Installing & Erection split type wall mounted air conditioner capacity 1.0 tonne 5 Star Make:- Toshiba, Mitsubishi Electric, Daikin, O' General, Hitachi, voltas with arrangement for installing OD units on terrace including 3 mtr inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
1
54509
54509.75
... More
Providing & Installing & Erection split type wall mounted air conditioner capacity 2.0 tonne 5 Star Make:- Toshiba, Mitsubishi Electric, Daikin, O' General, Hitachi, voltas with arrangement for installing OD units on terrace including 3 mtr inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
14
74155
1038173.08
... More
Providing laying hard soft copper concealing of copper pipes of dia 12.7mm od (insulation = 13mm)/9.5mm od (insulation = 13m) as per requirement and wall thickness 0.8mm, insulated, 4mm electric wire sheathed 3 core double insulated / taping laying in chase cutting of wall and repairing the same within the building and installing charges complete in all respects.
60
1228
73737
... More
Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
Overall size 2.5sq.mm (50/0.25mm), 3Core
150
80
12010.5
... More
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:
15
8191
122869.2
... More
Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc.testing inside building complete.
225
260
58695.75
... More
Sub Head - 10 HVAC
-
-
-
... More
Providing, Jointing And Installation of 22 gauge Aluminium ducting with 13 mm insulation made of xlpe sheet outer side with aluminium coating
229
1300
297700
... More
Providing, Jointing And Installation Laminar box of size 2ft x 2ft having minipleat filter of. Capacity 500 cfm made out of aluminium body and diffuser of aluminium perforate sheet.
8
35000
280000
... More
Providing, Jointing And Installation of Retaurn air grills of 2ft by 2 ft size made out of alumium extrusion proflie
16
5000
80000
... More
Providing, Jointing And Installation of Exhaust and negative pressure unit with fine and pre filters having uv light for disinfectiontion of exhaust air
2
80000
160000
... More
Providing, Jointing And Installation of Double skin ahu of puff panel of 45 mm thick made out of 0.8 mm gi sheet both side having thermal black aluminum extrusion casing and profile with dual 8 rd cooper coil who could support dual outdoor unit with heating and cooling facility. Ahu must be of 8000 cfm capacity with 100 static pressure. It should be driven with ac drive motor to reduce or increase the cfm of the unit with installation kit
1
550000
550000
... More
Providing, Jointing And Installation of Duplex Outdoor unit hvac 8.5 tr x 2 one primary and 1 standby with both heating and cooling facility with all the required hardware like expansion valve, drier, glass wool interconecting cooper pipes, valves, remote kits insulation etc
1
380000
380000
... More
Providing Internal Electrical Installations
-
-
-
... More
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
-
-
-
... More
Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring fan point (Without fan box)
10
1091
10916.9
... More
Wiring light point
16
762
12199.52
... More
Wiring 6Amp. wall socket point
26
618
16092.18
... More
Wiring 6Amp. Plug control comprising wall socket point
27
371
10026.72
... More
Wiring 16/20Amp. power plug control point
11
478
5258.33
... More
Wiring light point without control switch.
2
334
668.98
... More
Wiring light point with double control switches.
1
1326
1326.09
... More
Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
19
826
15709.01
... More
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
... More
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).
18
707
12743.1
... More
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
... More
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring Telephone socket point RJ11 (one module)
17
355
6039.08
... More
Wiring Networking socket point RJ45 (one module)
18
461
8305.74
... More
REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01:
-
-
-
... More
Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR 34.01)
-
-
-
... More
Wiring fan point (Without fan box)
23
841
19365.08
... More
Wiring light point
54
475
25668.36
... More
Wiring 6Amp. wall socket point
12
466
5597.88
... More
Wiring 6Amp. Plug control comprising wall socket point
21
369
7752.15
... More
Wiring 16/20Amp. power plug control point
27
553
14950.44
... More
PVC INSULATED FR COPPER CONDUCTOR CABLES:
-
-
-
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
Overall size 1.5sq.mm (Un-sheathed)
952
24
23466.8
... More
Overall size 2.5sq.mm (Un-sheathed)
2227
36
82354.46
... More
Overall size 4sq.mm (Un-sheathed)
646
53
34502.86
... More
Overall size 10sq.mm (Un-sheathed)
198
120
23862.96
... More
Overall size 16sq.mm (Un-sheathed)
396
187
74301.48
... More
HEAVY GAUGE WELDED CONDUIT PIPES:
-
-
-
... More
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:- Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan.
30
131
3950.7
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
-
-
-
... More
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
1125
70
79650
... More
Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
10
97
973.4
... More
Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)
87
128
11163.84
... More
MINIATURE CIRCUIT BREAKERS:
-
-
-
... More
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Single Pole 6-32amp. (10kA, Curve-C)
84
190
16008.72
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
4
1750
7003.04
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:
-
-
-
... More
Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
... More
SP&N Double Door Distribution Board 4 way each
1
1101
1101.28
... More
TP&N Horizontal Double Door Distribution Board 4 way each
1
2914
2914.93
... More
TP&N Horizontal Double Door Distribution Board 12 way each
2
5948
11897.18
... More
XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):
-
-
-
... More
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
-
-
-
... More
Overall size 10sq.mm (2Core) Un-armoured (On-Surface)
165
94
15645.3
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):
-
-
-
... More
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
... More
Overall size 10sq.mm (2 Core) Un-armoured (Loose)
15
76
1145.7
... More
Overall size 95sq.mm (3½ Core) Un-armoured (Loose)
130
453
58891.3
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
-
-
-
... More
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
... More
Double Walled Corrugated HDPE Pipe 90/ 76mm (Outer/ Inner dia.)
114
199
22698.54
... More
COPPER EARTHING:
-
-
-
... More
8 SWG COPPER EARTHING :
-
-
-
... More
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
2
11144
22288.68
... More
COPPER EARTHING STRIP (As Additional Length):
-
-
-
... More
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
... More
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)
40
325
13038
... More
COPPER EARTHING:
-
-
-
... More
COPPER EARTHING (Upto 14 metre in Length):
-
-
-
... More
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
2
18663
37326.76
... More
COPPER EARTHING STRIP (As Additional Length):
-
-
-
... More
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
-
-
-
... More
Additional Length 20mm x 3mm thick Copper Tape
20
517
10353.8
... More
SUPPLY AND ERECTION OF WIRING ACCESSORIES:
-
-
-
... More
Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-
-
-
-
... More
Ceiling Rose (Flush Piano type)
4
36
145.4
... More
SHEET METAL IRON CLAD SWITCHES:
-
-
-
... More
Supply and erection of sheet metal Iron Clad Switches on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications:-
-
-
-
... More
ICDP Switch 32amp., 415volts
1
1646
1646.94
... More
LT PANELS:
-
-
-
... More
Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).
Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel.
-
-
-
... More
The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc.
-
-
-
... More
The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.
-
-
-
... More
Painting:- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work . Busbars:-The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.
-
-
-
... More
Metering:-The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:-
-
-
-
... More
LT Panel enclosure having space for 1No. Incomer MCCB 250Amp. and 6Nos. outgoing MCCB's 40amp. to 125amp. according to the requirement at site (Approx. size 1300 x 1650 x 400mm)
1
96259
96259.3
... More
ON LOAD CHANGEOVER SWITCH:
-
-
-
... More
ON LOAD CHANGEOVER SWITCH (Without Sheet Enclosure):
-
-
-
... More
Supply and erection of On Load Change over Switch with advance neutral UNIT (Panel mounting Cubical type) in the existing Cubical Panel Confirms to IS 13947 (Part-3) complete with G.I. Bolts, Nuts & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-
-
-
-
... More
On Load Change Over Switch Four Pole 250amp., 415volts
1
16796
16796.48
... More
MCCB's (FOR PANELS & SHEET ENCLOSURE):
-
-
-
... More
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
... More
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
5
7744
38723.5
... More
MCCB Four Pole 250amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
15375
15375.83
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
-
-
-
... More
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
... More
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
2
6626
13253.46
... More
MCCB Four Pole 250amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
14257
14257.86
... More
MS SHEET ENCLOSURE FOR MCCB's:
-
-
-
... More
Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:-
-
-
-
... More
MS Sheet Enclosure having provision for MCCB 200-630Amp.with extended rotary handle (Approx. Size 750mm x 300mm x 250mm)
1
6221
6221.13
... More
Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:-
-
-
-
... More
SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 200mm x 140mm x 95mm with hinged water tight cover with locking arrangement
7
847
5929.07
... More
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
2
848
1696
... More
Supply and erection of Slim Recessed mounted, Round downlighter 18 watt (including constant LED driver) with Pressure die cast aluminium housing with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
5
1684
8420
... More
Supply and erection of Recessed Mounted 36 Watt LED 2x2 panel (including constant LED driver) with CRCA sheet having efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.
62
3767
233554
... More
Supply and erection of AC Ceiling Fan 1200mm (48") BEE 3 Star Rating suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer-in-charge at site.
33
3564
117612
... More
Supply and erection of Heavy duty Exhust Fans 300mm sweep 900RPM complete with aluminium louver shutter Canon Make, double ball bearing, longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
3
4890
14670
... More
Supply and erection of Heavy duty Exhust Fans 375/ 380mm sweep 900RPM complete with aluminium louver shutter Canon Make, double ball bearing, longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
1
5675
5675
... More
Supply and erection of LED Flood Light 120watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
7
10315
72205
... More
Supply and Erection of LED Bulk Head 9/10 Watt Surface mounted Pressure Die Cast Aluminium body (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
4
1025
4100
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%