Public Works Department Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 2,28,000Document Cost
₹ 10,000Tender Fee
₹ 5,900
Summary
Addition Alteration For Iphl In District Hospital Fazilka
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEPW_135128_1Tender No
Tender Notice no 23 dt 18-02-2025 FZKTender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and applying Anti Termite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containing chloropyrifos systemic insecticide diluted to manufacturer's specifications (i) In foundation pits, by treating the bottom & sides up to height of 300mm by uniformly spraying solution @ 5 Litre / sqm (ii) In the refill earth on both sides of all built up walls @ 7.5 Litre / Running meter (width - 300 mm, depth - 450 mm) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidated earth within the outer perimeter @ 5 Litre solution per sqm.
182.06
391
71349
... More
Cement Concrete 1:5:10 with 40 mm gauge stone ballast, using concrete mixing volumetric type
20.93
4228
88500
... More
Reinforced cement cocrete M-25 mechanicaly batch mixed using batch type mixer and needle vibrator mixed but excluding steel reinforcement, centering and shuttering in Foundation & Plinth structure.
7.75
6330
49058
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch typeconcrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
52.27
7388
386214
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
67.66
221
14969
... More
Damp proof course 4cm thick of cement
concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded.
33.34
386
12894
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
316.57
560
177425
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
79.68
400
31898
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
119.05
5027
598485
... More
First class brunt brick work laid in c/s (1:6) complete as per specifications above plinth in super structure.
97.94
5171
506496
... More
115mm thick brick wall laid in cement sand mortor 1:4 without reinforcemnet in super structure
31.87
661
21075
... More
12.5mm thick cement plaster in damp proof course 1:3 with two coats of
bitumen at 1.65Kg. Per Sqm laid hot and sanded.
66.44
298
19808
... More
20mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per Sqm laid hot and sanded20mm thick cement plaster 1:5 in two coat work
66.44
379
25198
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/ Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
253.53
898
227832
... More
12.5 mm thick cement plaster 1:5
168.47
190
32124
... More
20mm thick cement plaster 1:5 in two coat work
168.47
260
43838
... More
12.5 mm thick cement plaster 1:4
246.31
199
49043
... More
20mm thick cement plaster 1:4 in two coat work
246.31
273
67467
... More
Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective Item)
34.15
244
8347
... More
Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
16
142
2276
... More
Providing and fixing 110 mm dia SWR U.P.V.C coupling/socket for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
8
88
708
... More
Providing and fixing in position MS heavy flat iron clamps made out of MS flat not less than 5 mm thick of the approved design for fixing C.I. soil waste, vent or antisyphonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 100mm i/d H.C.I pipes.
32
217
6950
... More
Providing and fixing in position gratings 150mm x 150mm for gully trap
8
87
703
... More
Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation & taken only from outside the building plinth in 15 cm layers including ramming watering and consolidation lead upto 30 metres.
76.09
396
30153
... More
For royality of oridinary earth
76.09
103
7866
... More
Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
77.37
66
5135
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling.
254.46
488
124245
... More
Terracing consiting of machine made Hollow Clay Tiles 80mm thick (Smooth surface) confirming to IS: 3951 (Part-I)-2009 laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm on top of R.C.C. slab including grouting with cement sand mortar 1:4 having 10mm wide joints spacing on all sides of tiles and top surface to be left clean complete as per specification (laying shall be done as per PWD specifications).
281.19
1012
284680
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
117.35
1497
175675
... More
Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Udaipur Green Marble Tiles of thickness 18mm to 20mm Slabs sizes above 0.50 sqm
97.41
1253
122120
... More
Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
7.02
1155
8113
... More
Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing.
3.91
1406
5499
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge
117.35
186
21882
... More
Extra labour for projected nosing of stair case of any shape and design
100.15
67
6752
... More
Precast chequered tiles of 20mm thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps on landings.
8.94
830
7422
... More
Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
38.68
2963
114628
... More
Supply & Fixing of door frames (Chowkaths) consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (base steel as per IS:13) with zinc of 120gm/sqm & Powder coated with pure Polyster powder upto 50 micrones (as per approved colour), 3 Nos 100mm butt-hinges 2mm thick, 6 Nos M.S hold fast with split and tail welded to stiffner plate 200mm long, Reciever for aldrop, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.60mm of approved shade, fixed in position, including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge Doors frame of size 80mm x 50mm with 37mm wide single rebate for 35mm door shutter.
54.88
1192
65448
... More
Supply & Fixing of door frames (Chowkaths) consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (base steel as per IS:13) with zinc of 120gm/sqm & Powder coated with pure Polyster powder upto 50 micrones (as per approved colour), 3 Nos 100mm butt-hinges 2mm thick, 6 Nos M.S hold fast with split and tail welded to stiffner plate 200mm long, Reciever for aldrop, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.60mm of approved shade, fixed in position, including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge Door frame of size 125mm x 60mm with 37mm wide double rebate for 35mm door shutter.
24.31
1566
38083
... More
Supply & Fixing of Window frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS: 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12- 16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position by means of PVC & metal hold fastner with PVC cap complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in-Charge. Windows Outer frame of size 72mm x 55mm and central mullion 72mm x 50mm with Double rebate.
142.53
1097
156462
... More
Supply & Fixing of Window shutter consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS: 513) with zinc of 120gm/sqm steel sheet pre coated (as per approved colour) with polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position fixed in position by means of screws complete in all respects as per drawing, design, specification & entire stasfication of Enginner-in-Charge. Glazed Windows shutter Section 47mm x 20mm (Without Glass)
14.13
5600
79134
... More
Wire Mesh Windows shutter Section 40mm x 20mm with S.S wire mesh 32 gauge flymesh with 144 holes per square inch
14.13
5692
80429
... More
Providing and fixing glazing in door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in -charge (Cost of Gasket /beading shall be paid as per respective item) Float glass panes of 5.5 mm thickness
38.48
816
31417
... More
Providing & fixing fixed beeding 12mm x 12mm for fixed glass with ECO fixed gasket (EPDM)
189.33
252
47870
... More
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position.(Code : 2202-1(1999)) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick
23.42
2430
56920
... More
Providing and Fixing HPL Hermetically Sealed Hinge Door Civil of various sizes consists of 44mm Thickness of Door Leaf, 4mm Thickness of HPL sheet on both side, SS Ball bearing hings, "D" Handles, infill material Puff,Both side Key operation dead lock, Gasket, 325x325mm vision Glass.
6.51
23586
153545
... More
Providing & Fixing storage cabinet above shelves size 1'-6" deep x 2'-6" height consisting of 19mm thick HDHMR board, finished with 1 mm thick sunmica outside and 0.80 mm white sunmica inside as per shade approved by the engineer-in-charge, handles, hinges complete as per drawing.
24.58
16271
399941
... More
Providing & Fixing storage cabinet under shelves size 1'-6" deep x 2'-0" height consisting of 19mm thick HDHMR board, finished with 1 mm thick sunmica outside and 0.80 mm white sunmica inside as per shade approved by the engineer-in-charge, handles, hinges complete as per drawing.
24.58
7065
173658
... More
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
8.28
10798
89415
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. II (size of door 701mm to 850mm)
14
1210
16947
... More
Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete.
49.68
7876
391325
... More
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
300mm x 16mm
12
209
2516
... More
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
57.62
116
6738
... More
Providing and fixing 0.50mm thick aluminum sheet including cost of necessary fittings i.e. screws, etc. complete.
3.62
522
1892
... More
Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect.
54
506
27363
... More
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.
106.64
297
31682
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty onnew plastered surface.Complete as per specifications
645.2
125
80889
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
492.61
84
41517
... More
Providing and fixing mineral fibre false ceiling tiles ( NRC 0.55 to 0.6) at all heights of size 595X595x16 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The
system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge
105.82
1770
187400
... More
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)
645.2
93
60494
... More
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
492.61
145
71616
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge.
266.61
370
98867
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
74.7
387
28960
... More
Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work
247.71
71
17746
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item)
8.98
1090
9792
... More
Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge. 4mm thick ACP Sheet
66.54
2496
166137
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
89.64
29
2644
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
89.64
69
6233
... More
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
7.63
191
1463
... More
Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete
mixer volumetric type
1.27
3931
4993
... More
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth
4.77
5110
24377
... More
Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres.
2.8
66
186
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material.
27.82
488
13584
... More
Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material.
27.82
411
11452
... More
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
6.37
191
1221
... More
Cement Concrete 1:5:10 with 40 mm gauge stone ballast, using concrete mixing volumetric type
9.91
4228
41903
... More
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths).
15.46
679
10505
... More
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths). (labour rate)
42.75
141
6035
... More
Addition/ Alteration in existing building
Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below.
9
234
2114
... More
Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Windows of area 3 sqm and below
6
149
898
... More
Dismantling brick work tile, masonry or tile lining in cement
11.8
718
8478
... More
Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
153.92
113
17513
... More
Dismantling concrete Reinforced cement concrete
1.79
2321
4156
... More
Scraping Cement plaster
246.97
37
9368
... More
Scraping White wash and colour wash
390.04
7
2875
... More
Credits
Bricks
2266
-3
-6798
... More
Brick bats
5.9
-472
-2788
... More
door
9
-700
-6300
... More
windows
6
-400
-2400
... More
Dismantling concrete Cement Lime concrete, cement concrete of 1:6:12 or leaner mix
14.54
434
6311
... More
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
23.97
191
4596
... More
Providing and applying Anti Termite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containing chloropyrifos systemic insecticide diluted to manufacturer's specifications (i) In foundation pits, by treating the bottom & sides up to height of 300mm by uniformly spraying solution @ 5 Litre / sqm (ii) In the refill earth on both sides of all built up walls @ 7.5 Litre / Running meter (width - 300 mm, depth - 450 mm) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidated earth within the outer perimeter @ 5 Litre solution per sqm.
25.64
391
10048
... More
Cement Concrete 1:5:10 with 40 mm gauge stone ballast, using concrete mixing volumetric type
2.4
4228
10148
... More
Reinforced cement cocrete M-25 mechanicaly batch mixed using batch type mixer and needle vibrator mixed but excluding steel reinforcement, centering and shuttering in Foundation & Plinth structure.
1.15
6330
7280
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch typeconcrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
1.53
7388
11305
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
10.02
221
2217
... More
Damp proof course 4cm thick of cement
concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded.
5.01
386
1938
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
20.42
560
11445
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
1.4
400
560
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
13.43
5027
67515
... More
First class brunt brick work laid in c/s (1:6) complete as per specifications above plinth in super structure.
4.36
5171
22548
... More
115mm thick brick wall laid in cement sand mortor 1:4 without reinforcemnet in super structure
44.4
661
29361
... More
12.5mm thick cement plaster in damp
proof course 1:3 with two coats of
bitumen at 1.65Kg. Per Sqm laid hot and sanded.
21.82
298
6505
... More
20mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per Sqm laid hot and sanded20mm thick cement plaster 1:5 in two coat work
21.82
379
8275
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/ Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
213.03
898
191437
... More
12.5 mm thick cement plaster 1:5
29.94
190
5709
... More
20mm thick cement plaster 1:5 in two coat work
29.94
260
7791
... More
12.5 mm thick cement plaster 1:4
12.16
199
2421
... More
20mm thick cement plaster 1:4 in two coat work
12.16
273
3331
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling.
14.22
488
6943
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
169.99
1497
254478
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge
169.99
186
31698
... More
Extra labour for projected nosing of stair case of any shape and design
20.88
67
1408
... More
Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
13.68
2963
40541
... More
Supply & Fixing of door frames (Chowkaths) consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (base steel as per IS:13) with zinc of 120gm/sqm & Powder coated with pure Polyster powder upto 50 micrones (as per approved colour), 3 Nos 100mm butt-hinges 2mm thick, 6 Nos M.S hold fast with split and tail welded to stiffner plate 200mm long, Reciever for aldrop, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.60mm of approved shade, fixed in position, including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge Doors frame of size 80mm x 50mm with 37mm wide single rebate for 35mm door shutter.
10.52
1192
12546
... More
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position. (Code : 2202-1(1999) )
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-
35mm thick
4.23
2430
10281
... More
Providing and Fixing HPL Hermetically Sealed Hinge Door Civil of various sizes consists of 44mm Thickness of Door Leaf, 4mm Thickness of HPL sheet on both side, SS Ball bearing hings, "D" Handles, infill material Puff,Both side Key operation dead lock, Gasket, 325x325mm vision Glass.
9.11
23586
214868
... More
Providing & Fixing storage cabinet above shelves size 1'-6" deep x 2'-6" height consisting of 19mm thick HDHMR board, finished with 1 mm thick sunmica outside and 0.80 mm white sunmica inside as per shade approved by the engineer-in-charge, handles, hinges complete as per drawing.
17.33
16271
281976
... More
Providing & Fixing storage cabinet below shelves size 1'-6" deep x 2'-0" height consisting of 19mm thick HDHMR board, finished with 1 mm thick sunmica outside and 0.80 mm white sunmica inside as per shade approved by the engineer-in-charge, handles, hinges complete as per drawing.
17.33
7065
122436
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc.
complete I.S.I Designation No. II (size of door 701mm to 850mm)
2
1210
2421
... More
Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete.
2.46
7876
19377
... More
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
300mm x 16mm
2
209
419
... More
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
4.23
116
495
... More
Providing and fixing 0.50mm thick
aluminum sheet including cost of
necessary fittings i.e. screws, etc.
complete
0.7
522
366
... More
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.
1379.17
297
409738
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty onnew plastered surface.Complete as per specifications.
479.72
125
60142
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish.
91.28
84
7693
... More
Providing and fixing mineral fibre false ceiling tiles ( NRC 0.55 to 0.6) at all heights of size 595X595x16 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge
75.86
1770
134343
... More
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)
479.72
92
44475
... More
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
91.28
145
13270
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. For fixed portion and chawkhats
27.44
370
10176
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
73.17
387
28367
... More
Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work.
100.61
71
7208
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item). Float glass panes of 5 mm thickness
2.49
1090
2715
... More
Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge. 4mm thick ACP Sheet
13.01
2496
32483
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
17.57
29
518
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
17.57
69
1222
... More
Electrical Services
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring fan point (Without fan box)
9
1091
9825
... More
Wiring fan point (With fan box)
14
1210
16943
... More
Wiring light point
89
762
67860
... More
Wiring call-bell point
2
744
1488
... More
Wiring 6Amp. wall socket point
7
618
4333
... More
Wiring 6Amp. Plug control comprising wall socket point
34
371
12626
... More
Wiring 16/20Amp. power plug control point
26
478
12429
... More
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
10
826
8268
... More
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. universal Socket (shuttered), 2Nos. 16/20Amp. switch with indicator and 2Nos. blanking plate (Modular accessories).
14
1106
15487
... More
PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1sq.mm (Un-sheathed)
250
19
4793
... More
Overall size 1.5sq.mm (Un-sheathed)
1280
24
31552
... More
Overall size 2.5sq.mm (Un-sheathed)
1350
36
49923
... More
Overall size 4sq.mm (Un-sheathed)
300
53
16023
... More
Overall size 6sq.mm (Un-sheathed)
55
73
4068
... More
Overall size 10sq.mm (Un-sheathed)
150
120
18078
... More
Overall size 16sq.mm (Un-sheathed)
90
187
16887
... More
Overall size 25sq.mm (Un-sheathed)
40
295
11833
... More
XLPE INSULATED LT CABLES: XLPE INSULATED ARMOURED CABLES (LOOSE): Overall size 6sq.mm (2Core) Armoured (Loose)
50
100
5004
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 50sq.mm (4Core) Un-armoured (Loose)
500
291
145515
... More
HEAVY GAUGE WELDED CONDUIT PIPES: Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:- Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan.
15
131
1975
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
1525
70
107970
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
30
97
2920
... More
Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- PVC Flexible Pipe 25mm dia.
130
17
2328
... More
Supply and erection of Compression glands, Locking arrangement, Check- nuts for PVC flexible pipe complete with as required:- PVC compression Socket gland 25mm dia.
60
22
1327
... More
COPPER EARTHING: 8 SWG COPPER EARTHING : Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
1
11144
11144
... More
COPPER EARTHING (Upto 14 metre in Length):Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
1
18663
18663
... More
COPPER EARTHING STRIP (As Additional Length): Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:- Additional Length 20mm x 3mm thick Copper Tape
15
517
7765
... More
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:- Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)
15
343
5155
... More
SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including
fixing & connections and petty material etc.,:- Ceiling Rose (Flush Piano type)
23
36
836
... More
SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including
fixing & connections and petty material etc.,:- Call Bell 220/230 volts AC Ding Dong
2
132
264
... More
MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
MCB Single Pole 6-32amp. (10kA, Curve-C)
80
190
15246
... More
MCB Double Pole 6-32amp. (10kA, Curve- C)
2
580
1161
... More
MCB Four Pole 40amp. (10kA, Curve-C)
3
1531
4595
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
3
1750
5252
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- SP&N Double Door Distribution Board 4 way each
2
1101
2203
... More
SP&N Double Door Distribution Board 8 way each
1
1416
1416
... More
TP&N Horizontal Double Door Distribution Board 6 way each
3
3592
10777
... More
TP&N Horizontal Double Door Distribution Board 8 way each
1
4288
4289
... More
Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-
Cable End Box for SPN 4Way
2
583
1167
... More
Cable End Box for SPN 8 Way
1
679
679
... More
Cable End Box for TPN 6 Way
3
1206
3620
... More
Cable End Box for TPN 8 Way
1
1373
1374
... More
SHEET METAL BUS BAR CHAMBERS (COPPER STRIPS): Supply and erection of sheet metal bus- bar chamber (factory fabricated) duly powder coated on existing surface with required 4Nos. of tin plated copper bus- bar strips of suitable length and cross- sectional area mounted on DMC/ SMC moulds at sufficient distance, enclosure made of M.S. sheet 1.6mm thick with hinged cover and lock, fitted with dust excluding gaskets and secured with sufficient no. of cadmium plated iron screws and of given overall dimensions and to be fixed with G.I. bolts and nuts/ rag bolts and nuts etc. complete with all accessories including connections with suitable size of thimbles, bonding to the existing earth and painting etc. as desired by the Engineer-in-charge at site: Bus Bar Chamber 200amp., 415volts Overall Dimensions (350mm x 450mm x 150mm) nominal
2
7906
15813
... More
MCCB's (FOR PANELS & SHEET ENCLOSURE): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- MCCB Four Pole 125amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
2
9342
18684
... More
MS SHEET ENCLOSURE FOR MCCB's: Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:- MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm)
2
3342
6684
... More
ERECTION, REPAIR AND REWINDING OF FANS: REPAIR AND REWINDING OF CEILING/ EXHAUST FANS: Providing Full stator rewinding of a Ceiling fan/ Exhaust fan (Capacitor type) with super enamelled copper wire including cleaning & insulating the stator slots, sleeving, soldering, wrapping of cotton tape, varnishing, re-assembling & testing etc., complete:- Rewinding of Ceiling Fan 1200mm Sweep
3
552
1656
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 63/51mm (Outer/ Inner dia.)
480
155
74842
... More
Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- Aluminium thimble cable Core size 50sq.mm
8
28
228
... More
Supply and erection of heavy duty Copper thimbles/lugs for cable end termination duly crimped including making necessary connections etc.completely:-
Copper thimble cable Core size 4 - 6sq.mm
12
21
262
... More
Copper thimble cable Core size 10 - 16sq.mm
40
26
1066
... More
Copper thimble cable Core size 25 - 35sq.mm
16
41
659
... More
Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections:- Brass Gland for Aluminium cable 2/3/3½/4 Core size 50sq.mm
2
179
359
... More
Supply and erection of 3-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase witn double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air delivery of 210 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms. (without packing) or higher. The product should have a manufcaturer's guarantee warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.
16
3223
51568
... More
Supply and erection of Receesed Mounted 36Watt LED Panel (including constant LED driver) with CRCA sheet having efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
37
3766
139342
... More
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
34
820
27880
... More
Supply and erection of Heavy duty Exhaust Fan 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
14
4890
68460
... More
Supply and erection of Wall Fan 400 mm Swing 16 Inch. including flexible wire &petty material etc. complete in all respects as appd and desired by the Engineer in-charge at site. Makes:- CromptonWM Hi Flo Neo / Orient 400 mm High Velocity Wind Pro Wall 80/Havell's D'Zire.
4
3353
13412
... More
Supply and erection of LED Flood Light 50 watt, AC supply voltage 140-270 volts, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD10%, CRI minimum 70, High power LED (with wattage 1 to 5 watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter No: AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
2
3863
7726
... More
Supply & erection of Single phase Pure Sine Wave Inverter, Output Power-1840 Watts, Rated Capacity- 2200 VA; Efficiency (Battery Mode) 80% ,Frequency: 50 Hz x 50 Hz, input voltage (standard range) 100 v - 300 v;Charging Current (Standard) : 10 Amps ± 1 Amps,Protection- OverVoltage, OverCurrent, ShortCircuit and Narrow Voltage Range from 180V~260V, integrated coolingFan, operated with 2 no. Battery 150AhTubuler suitable for charging 24 Volts DC power backup including petty material cables, Inverter MS Stand, connection & testing charge etc. with 2 year warranty period complete in all respect as desired by the Engineer In Charge.
1
49525
49525
... More
Public Health Works Internal Sewerage System
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B 110mm o/d SWR UPVC pipe lines laid complete
37
396
14658
... More
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B 90mm o/d SWR UPVC pipe lines laid
complete
99
344
34124
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipesSingle Tee With Door
4
111
444
... More
Elbow 90 Degree (All side socketed)
4
162
650
... More
Vent Cowls
4
45
182
... More
Coupler
3
111
333
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 90mm o/d pipes Elbow 90 Degree ( All side Socketed)
8
119
953
... More
Vent Cowls
8
37
301
... More
Coupler
5
109
547
... More
Single Tee with door
8
216
1734
... More
Floor Trap 110mm x 110mm
17
338
5752
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make ( to the approval of Engineer-in-charge) 110mm o/d
4
101
405
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make ( to the approval of Engineer-in-charge) 90mm o/d
8
85
686
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. 100mm internal Diameter S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
8
1930
15440
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
5
6780
33902
... More
Internal Water Supply System
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 pipe & fitting 20mm o/d
50
233
11660
... More
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 pipe & fitting 32mm o/d
59
402
23767
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. Size 75 mm x 75 mm
109
72
7923
... More
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
7
251
1762
... More
Providing, fixing and jointing Cpvc Union Couplings with Upvc pipes complete in all respect. 20mm i/d Cpvc Union
8
136
1096
... More
Providing, fixing and jointing Cpvc Union Couplings with Upvc pipes complete in all respect. 32mm i/d Cpvc Union
10
264
2648
... More
Providing, fixing and jointing CPVC Ball valves screwed with CPVC ball & spindle & Teflon seats, on CPVC pipe lines including all carriages complete. 20mm i/d Brass Ball valves
2
356
714
... More
Providing, fixing and jointing CPVC Ball valves screwed with CPVC ball & spindle & Teflon seats, on CPVC pipe lines including all carriages complete. 32mm i/d Brass Ball valves
4
821
3285
... More
Sanitary Installation
Providing and fixing in position set of EWC and WHB size 46x36 cm for Handicapped person of approved make (to the approval of the Engineer-in-charge) consisting of matching cistern, one pair mounting brackets, seat cover, one no. hinges rail 76cm and 4 no. grab rails 60cm complete in all respect and to the entire satisfaction of Engineer-in-charge.
1
67394
67395
... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
3
5035
15107
... More
Providing and fixing jet spray with 2'-.6" long PVC Pipe. With C.P Brass nut`
4
501
2006
... More
Providing and fixing in position C.P. Brass Hexa Nipple 15mm of approved make ( to the approval of Engineer-in-charge) complete in all respect.
4
87
350
... More
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader
Ocular-Regular and C.P. brass tube connection 300 mm long complete.
1
6901
6901
... More
Vitreous white Chinaware Partition Large partition size 75 x 16.5 x 36.5 cm
1
4900
4901
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. Size 49 cm dia (above counter round)
7
4961
34734
... More
Providing and fixing in position C.P. Elbow action pillar tap of approved make (to the approval of Engineer-in-charge) complete in all respect. (Difference in cost of between Elbow action pillar tap and Normal Pillar tap)
4
1237
4951
... More
Providing and fixing in position vitreous Chinaware white laboratory sinks of approved. make (to the approval of Engineer-in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect. Size 470mmx370mmx180mm
7
6769
47389
... More
Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of Engineer-in-charge) complete in all respect. Laboratory cock swan neck One way
7
1422
9956
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
30
191
5752
... More
Providing and fixing PVC waste pipe collapsiable 32mm complete in all respect.
17
119
2024
... More
Providing and fixng in position towel rails/ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P.brass towel rails size 15mm dia 610 mm long
4
1621
6485
... More
Providing and fixng in position towel rails/ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P brass towel ring
4
959
3839
... More
Providing and fixing in position C.P. Brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
16
888
14210
... More
Providing and fixing in position 15mm i/d bib cock of approved make ( to the approval of Engineer-in-charge) complete in all respect. C.P. brass Bib cock foam flow without flange
4
966
3864
... More
Providing & Fixing in postion CP Brass Spout Operated Pillar Tap with base flange (for foot operated valve) of approved make (to the approval of Engineer-in-charge) complete in all respect.
4
1699
6797
... More
Providing and fixing in position stop cock/Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respects. C.P.Brass 15mm Angle valve without flange
30
870
26106
... More
Providing and fixing in position stop cock/Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respects. C.P brass 15mm concealed stop cock with flange
4
1268
5074
... More
Providing and fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect.
15
66
996
... More
Providing and fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make ( to the approval of Engineer-in-charge) with various fixtures complete in all respect. C.P. Brass extension piece, 25mm long to 50mm long
15
112
1691
... More
Providing and fixing in position SS Grating with frame ofapproved make (to the approval of engineer in charge) complete in all respects.
18
116
2098
... More
Providing and fixing in position 5mm thick bevelled edge mirror of superior glass ( of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. Brss screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-charge) size 600mmx 450mm)
9
1263
11368
... More
Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.
4
1141
4568
... More
Providing and fixing in position on terrace (at all floor levels) HDPE water storage tanks of approved make ( to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks. 2000 ltr capacity
2000
11
22760
... More
Providing and fixing in position automatic brass Ball Cock in tanks. Plastic Ball Cock with rod and Plastic Ball Brass ball cock with rod and plastic ball 32mm i/d
2
957
1916
... More
Providing and fixing in position cPVC Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC water storage tanks complete in all respect. CPVC tank nipple 25mm i/d
2
179
358
... More
Providing and fixing in position cPVC Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC water storage tanks complete in all respect. CPVC tank nipple 40mm i/d
2
316
632
... More
Construction of Plateform complete as per specification & as desired by Engineer-in-charge. For 1000 ltr water tank
2
4000
8000
... More
Flooring & Wall Tile
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer of material
27.75
424
11782
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge to be laid below the topping using mechanical mixer for mixing of matrial
27.75
182
5058
... More
Providing and laying Rectified Procelin floor tiles 400x400nn or more (thickness to be specified by the manufacturer) of premium quality conforming to IS: 15622 of approved make in all colours laid on 20mm thick bed of cement mortar 1:4 (1 cement:4 Fine sand) for new flooring complete.
27.75
889
24674
... More
Providing and fixing 1st quality cremic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS: 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600x300 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3 kg per sqm inclduing pointing in white cement mixed with pigment of matching shade complete.
95.63
898
85937
... More
Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects.
95.63
531
50827
... More
Water Cooler
Providing and fixing in position water cooler without stablizer of approved make (to the approval of Engineer-in-charge) including carriage complete in all respect. Water Cooler Full Steel Body 150/150 ltr without Stablizer
1
46849
46849
... More
Supply and erection of single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10 kA) of suitable capacity compete with internal copper wiring along with amp. meter and volt meter, high voltage vut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2KVA
1
5008
5008
... More
Providing & fixing in position Commercial RO without reservoir with four no. cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.
1
40226
40227
... More
Estate Water Supply
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including triming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside he town involving lead upto 15 meter complete in all respect. Earth work upto 1.5 m depth All classes of soil except rocky
22.44
104
2343
... More
EXTERNAL IN THE GROUND : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per
IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, & testing of joints excluding cost of excavation complete as per direction of Engineer-in-Charge. CPVC SDR 11 pipe & fittings 50mm o/d
34
577
19641
... More
Providing, fixing and jointing Cpvc Union Couplings with Upvc Pipes complete in all respect 50mm i/d cPVC union
5
421
2107
... More
Estate Sewerage
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 110 mm o/d pipes
20
599
11985
... More
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 160 mm o/d pipes
54
1253
67683
... More
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects. For depth exceeding 3.0m but not exceeding 4.5 m BGL
For all classes of soil except rocky
31.87
121
3861
... More
Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. Inside size 90x150 cm and 120 cm deep
1
23966
23966
... More
Roof Top Rainwater Harvesting
Providing, laying, fixing & jointing of PVC pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 160mm o/d pipe of 6kg/sqcm
150
920
138069
... More
Excavation in trenches with straight or open cutting in a street, lanes or in a open area with 3D/JCB or excavator including manually dressing bed, trimming sides & slide slope for sewer & manhole to full depth as shown in drawing, including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching etc. fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of suface to oiginal level removal of surplus spoils from the site of works upto chain (15 m), complete in all respects. For depths not exceeding 3.0 metre B.G.L For all classes of soil except rocky
93.15
104
9716
... More
Construction of Haudi internal size 0.90 mtr.x0.90 mtr. & 0.9 mtr. depth in brick masonary 1.5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x600mm clear inside opening rectangular RCC manhole cover with frame light duty complete as per drawing attached & as desired by the Engineer-in-charge
8
10303
82424
... More
Construction of Haudi internal size 0.45mtr. x 0.45 mtr. & 0.45 mtr. depth in brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC slab cover 75mm thick inside plaste, cement rendering & RCC man hole cover 450x450 mm clear inside opening rectangular RCC manhole cover with frame light duty complete as per drawing attached & as desired by the Engineer-in-charge
5
4111
20555
... More
Construction of Rain water recharge well 3.0 mtr dia with working depth 3.00 mtr. consisting of drilling bore 300mm dia 35 mtr, supplying and lowering pvc perforated housing pipe 200mm dia 10kgf/sqcm 50mtr. sorrounded with filtermedia, galvanised stainer CI pipe class LA 150mm i//d 4 mtr. duly plugged from top with ball plug, fixing MS clamp, MS socket, well size 3.00 mtr internal dia, 5.50 mtr. deep constructed with BB in 1:5 cement sand mortar plastered from inside , RCC slab, filtered media in 3 layer, 2 Nos. RCC manhole cover conneted with collecting chamber size 1mtr. x 1mtr. x 1.20 mtr deep providing and fixing MS grating and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge.
(Note:- Payment will be made as per CSR Based Rates Plus Minus Quoted rates).
1
321549
321549
... More
Fire Fighting Arrangments
Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS : 15683 complete with all accessories as per manufactures specification. ISI Mark complete in all respect. 4.5 kg capacity
2
7150
14300
... More
Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS: 15683 complete with all accessories as per manufacures specification. ISI Mark complete in all respects.
6kg capacity
2
2940
5881
... More
AC Installation
Providing and installing split type wall mounted air conditioner capacity 1.0 tonne Daikin/Carrier/ Hitachi make with 5.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit OD units satnd for OD unit and concealing of copper pipes and drainage pipe withing building and installing charges complete in all respects. (Minimum 3 star)
1
43485
43485
... More
Providing and installing split type wall mounted air conditioner capacity 1.5 tonne Daikin/Carrier/ Hitachi make with 5.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit OD units satnd for OD unit and concealing of copper pipes and drainage pipe withing building and installing charges complete in all respects. (Minimum 3 star)
3
54485
163455
... More
Providing and installing split type wall mounted air conditioner capacity 2 tonne Daikin/ Carrier/ Hitachi make with 5.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit OD units satnd for OD unit and concealing of copper pipes and drainage pipe withing building and installing charges complete in all respects. (Minimum 3 star)
3
66260
198780
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%