Public Works Department Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Dec 2022
Closing Date27 Dec 2022
Tender Amount₹ 19,92,600
Costs
EMD
₹ 39,850Document Cost
₹ 5,000Tender Fee
₹ 2,351
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_CEPW_94031_1Bid Award Id
ViewTender No
15.10Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Scraping White wash and colour wash
446.91
-
7
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge
19.65
-
107
... More
Earth work in excavation in foundations trenches
etc. in all kinds of soil
4.49
-
107
... More
115mm thick brick wall in cement sand mortar 1:5 without reinforcement in foundations and plinth
21.97
-
601
... More
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
19.79
-
182
... More
Cement concrete 1:5:10 with 40 mm gauge stone ballast. using concrete mixing volumetric type
3.14
-
3845
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
6.82
-
5405.82
... More
Damp proof course 7.5 Cm thick cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded
6.2
-
534
... More
.First class burnt brick work laid in cement sand
mortar 1:5 in first storey upto 4 metres above
plinth level
18.49
-
5151
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
Size 600x600 mm
71.06
-
1424
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm.
71.06
-
124
... More
Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability)
4.62
-
1810
... More
20mm thick cement plaster 1:4 in two coat work.
213.33
-
164
... More
12.5 mm thick cement plaster 1:5
88.07
-
181
... More
Supplying and fixing of GI sheet frames
(Chowkat) consisting of 18 gauge (1.25mm) thick
steel sheet of the specified section (standard
design latest), including iron lugs (hold fasts) iron
hinges conforming to PWD specifications
including bolts for fixing steps, lock notch
provision for receiving tower bolts and finished,
fixed in position including the cost of cement
concrete 1:3:6 for filling in the frame and cement
concrete 1:2:4 for lugs complete to the
satisfaction of Engineer-in-charge.
19.05
-
539
... More
Providing & Fixing decorative high
pressure laminated sheet 1mm (2 Star)
thick with high density protective surface
layer and reverse side of adhesive
bonding quality conforming to IS : 2046
Type S, including cost of adhesive of
approved quality.
19.05
-
1279
... More
Hollock wood doors shutter windows shutter including hinges, screws, chocks,cheats, stops cords etc. complete fixed in
position.
6.69
-
2538
... More
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
0.57
-
10250.55
... More
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm thick above 0.40 sqm area.
5.3
-
598
... More
Factory manufactured solid flush door fixed in position iron hinges, etc . (excluding the cost of any fittings other than specified above but including the labour for fxing the same in position a) comercial with elm or gujan facing on both/sides with laminated core and lipped edges. iv) 35mm thick.
4.39
-
2307
... More
Providing & Fixing decorative high
pressure laminated sheet 1mm (2 Star)
thick with high density protective surface
layer and reverse side of adhesive
bonding quality conforming to IS : 2046
Type S, including cost of adhesive of
approved quality.
4.39
-
1279
... More
Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of
frame made out of M.S tubes of 19 guage
thickness and size of 19mm x 19mm for
styles & 15mm x 15mm for top & bottom
rails. M.S frame shall have a coat of steel
primers of approved make & manufacture.
M.S frame shall be covered with 5mm
thick heat moulded PVC 'C' Channel of
size 30 x 50mm forming styles, and 5mm
thick, 75mm wide PVC sheets for top rail,
lock rail & bottom rail on either side, and
10mm (5mm x 2) thick, 20mm wide cross
PVC sheet as gap insert for top rail &
bottom rail. Panneling of 5mm thick PVC
sheet to be fitted in the M.S Frame
welded/Sealed to the styles & Rails with
30mm wide x 5mm thick PVC sheet
beading on either side and joined together
with solvent cement adhesive.an
additional 5mm thick PVC strips of 20mm
width is to be stuck on the interior side of
the 'C' Channel using PVC solvent cement
adhesive etc. complete as per
manufacturer's specification, conforming
to test criteria specified in IS:4020-
1998,Drawings and to the entire
satisfaction of engineer-in-charge.Providing & fixing 30mm thick Factory
Made solid Panel PVC Door shutter
(Pannel thickness 5mm) Consisting of
frame made out of M.S tubes of 19 guage
thickness and size of 19mm x 19mm for
styles & 15mm x 15mm for top & bottom
rails. M.S frame shall have a coat of steel
primers of approved make & manufacture.
M.S frame shall be covered with 5mm
thick heat moulded PVC 'C' Channel of
size 30 x 50mm forming styles, and 5mm
thick, 75mm wide PVC sheets for top rail,
lock rail & bottom rail on either side, and
10mm (5mm x 2) thick, 20mm wide cross
PVC sheet as gap insert for top rail &
bottom rail. Panneling of 5mm thick PVC
sheet to be fitted in the M.S Frame
welded/Sealed to the styles & Rails with
30mm wide x 5mm thick PVC sheet
beading on either side and joined together
with solvent cement adhesive.an
additional 5mm thick PVC strips of 20mm
width is to be stuck on the interior side of
the 'C' Channel using PVC solvent cement
adhesive etc. complete as per
manufacturer's specification, conforming
to test criteria specified in IS:4020-
1998,Drawings and to the entire
satisfaction of engineer-in-charge.
4.23
-
2831
... More
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)
For shutter area above 0.50 sqm
4.39
-
248
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete
I.S.I Designation No. III (size of door 851mm to 1000mm)
2
-
1310
... More
Providing and fixing mineral fibre false ceiling tiles at all
heights With 16 mm thick beveled tegular mineral fibre
Anti-microbial false ceiling tile of size 595X595mm of
approved texture, design and pattern. The tiles should
have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K,
Fire Performance as per (BS 476 pt - 6 &7)in true
horizontal level suspended on interlocking T-Grid of hot
dipped all round galvanized iron section of 0.33 mm
thick (galvanized @120 gsm) comprising of main T
runners of 15x32 mm of length 3000 mm, cross T of
size 15x32mm of length 1200 mm and secondary
intermediate cross T of size 15x32 mm of length 600
mm to form grid module of size 600x600 mm
suspended from ceiling using galvanized mild steel item
(galvanised@80gsm) 50 mm long 8mm outer diameter
M-6 dash fasteners, 6 mm diameter fully threaded
hanger rod up to 1000 mm length and L-shape level
adjuster of size 85x25x2 mm, spaced at 1200 mm
centre to centre along main ‘T’. The system should rest
on periphery walls /partitions with the help of GI
perimeter wall angle of size24x24X3000 mm made of
0.40 mm thick sheet, to be fixed to the wall with help of
plastic rawl plug at 450 mm centre to centre & 40 mm
long dry wall S.S. screws. The exposed bottom portion
of all T-sections used in false ceiling support system
shall be pre-painted with polyester baked paint, for all
heights. The work shall be carried out as per
specifications, drawings and as per directions of the
engineer-in-charge.
12.54
-
1856
... More
Providing and Fixing ceiling consisting of 12.5mm
thick Gypsum Board of any size G.I. Cradling
hanged from the ceiling by means of G.I. hanger
complete as per drawings,specifications and tothe
entire satisfaction of engineer-in- charge.
7.52
-
1321
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
301.4
-
80
... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
0.57
-
24
... More
Providing and fixing teak wood beading to
door windows chowkats with iron screws
fixed in position complete as per design
and shape required
61.28
-
143
... More
Spirit polishing two coats including a coat of
wood filler on wood work
0.28
-
153
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
221.52
-
75
... More
Painting two or more coats with synthetic
enamel paints in all shades on old wood work
or metallic or plastered or concrete surface to
give an even shade including rubbing down
old paint.
99.84
-
64
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
60.07
-
66
... More
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
454.27
-
138
... More
Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded).
77.92
-
401
... More
Cost of new tile to be replaced instead of broken tiles in regrading of tile terracing including loading / unloading & all leads as desired by Engineer in charge .
6207
-
5.68
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
40.69
-
67.76
... More
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
4
-
99.86
... More
Providing and fixing in position gratings 150mm x 150mm on top Khura PVC grating
4
-
83.41
... More
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
7.59
-
83.41
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated
by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
1.27
-
6135
... More
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
1.14
-
6497
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
27.45
-
403
... More
Conglomerate floor 50mm thick cement concrete
topping 1:2:4 using mechanical mixer for mixing
of material
27.45
-
176
... More
Providing and fixing of Back Panel of Reception comprising of framing of 50mm x 50mm Partal/ Sal wood or equivalent with 3mm thick backing of Bakelite sheet on wall side,6mm thick waterproof ply on both sides and front portion fixed with 1mm thick laminate of colour and shade to be approved by Architect.Grooves in laminate or elsewhere to be provided as per architectural drawing. The make of ply and laminate and colour of laminate shall be provided as per approval by Architect/ Engineer-in-charge
7.15
-
4726.47
... More
Providing Signage & Providing New Colour ACP Sheet after Removing of existing ACP Sheets
-
-
-
... More
Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge.
3mm thick ACP Sheet
3.29
-
2085
... More
Writing matter on front signage Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012
5.24
-
1528.12
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc. ISI Marked) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete having span. Up to 15.00 Mtr. Span
1.38
-
10327
... More
Providing and Fixing Name Plates of various sizes made of PVC sheet printed with self adhesive tape pasted on sunboard complete as desired by Engineer-in-Charge
200
-
5.64
... More
Providing and Fixing Letters of “MOHALLA CLINIC” in SS 304 grade. Height and font as per approved drawing
1
-
5000
... More
Reception Counter including panneling on back complete
-
-
-
... More
Providing and fixing at site the Reception Table plan dimensions as 5’-6” x 4’-6” and height 2’-3” with storage, drawers, space for legs, etc complete as per drawing. The table should be sturdy and stable and will comprise of knot-free teak wood, wherever required, 19mm/ 12mm/ 6mm water proof ply and 1mm laminates of Make and Colour to be approvedby Architect/ Engineer-in-charge. The item also includes hardware such as drawer channels, handles, etc of make and design to be approved by Architect/ Engineer-in-charge. The item also includes all types of consumables such as nails, screws, fevicol, tape, etc and polishing, if required.Grooves, wherever required as per drawing, are also included in the item.
1
-
35840
... More
Providing and fixing at site the Pharmacy Counter plan dimensions as 5’-3” x 1’-101/2” and height 2’-6” with projected shelve, storage, drawers, space for legs, etc complete as per drawing. The Counter should be sturdy and stable and will comprise of knot-free teak wood, wherever required, 19mm/ 12mm/ 6mm water proof ply and 1mm laminates of Make and Colour to be approvedby Architect/ Engineer-in-charge. The item also includes hardware such as drawer channels, handles, etc of make and design to be approved by Architect/ Engineer-in-charge. The item also includes all types of consumables such as nails, screws, fevicol, tape, etc and polishing, if required.Grooves, wherever required as per drawing, are also included in the item.
1
-
22400
... More
Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge. 3mm thick ACP Sheet
2.77
-
2085
... More
FURNITURE
-
-
-
... More
Chair for Receptionist & Pharmacist- Providing and supplying mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 50kg/m³ with fabric tapestry 0.6mm thick and 235 GSM and the back shall be made of metal bright bar upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with cushion base lumbar support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used injection moulded polypropylene loop arm completely joint with seat. For seating durability the chair shall have push back 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load. The seat size shall be 460±10 mm(W) X 455±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 990±10 mm. complete as per sample approved by Architect & desired by Engineer-in-Charge.
2
-
6121.92
... More
Waiting Area chair 3 seater- Supply of 3-seater airport style waiting chairs of minimum size 1695mm (L) x 620mm (D) x 775±10 mm (H), in knock down condition, having minimum weight of 35 kg with the following specifications: The chair should have two arms at ends. The seat and back should be made of perforated mild steel (1.2mm thickness) duly powder coated with 45-65 micron. The armrest and legs should be powder coated made of steel. The understructure, connecting beam and leg assembly should be made of M.S. E.R.W. oblong tube (minimum 2mm thickness). The legs should have adjustable bullet feet at the bottom. The chair should be sturdy, strong and durable enough to bear the load of atleast 3 quital for three persons seated on it. The chair should have absolute round edges and smooth finish. The seat and back should preferably preferably have anchorage atleast two sides in order to give proper strength and avod bending and twisting due to usage of the chairs. complete as per sample approved by Architect & desired by Engineer-in-Charge.
3
-
17653.44
... More
Waiting Area chair 2 seater - Supply of 2-seater airport style waiting chairs of minimum 775±10 mm (H), in knock down condition, having the following specifications: The chair should have two arms at ends. The seat and back should be made of perforated mild steel (1.2mm thickness) duly powder coated with 45-65 micron. The armrest and legs should be powder coated made of steel. The understructure, connecting beam and leg assembly should be made of M.S. E.R.W. oblong tube (minimum 2mm thickness). The legs should have adjustable bullet feet at the bottom. The chair should be sturdy, strong and durable enough to bear the load of atleast 2 quital for two persons seated on it. The chair should have absolute round edges and smooth finish. The seat and back should preferably preferably have anchorage atleast two sides in order to give proper strength and avod bending and twisting due to usage of the chairs. complete as per sample approved by Architect & desired by Engineer-in-Charge.
3
-
14807.52
... More
Doctor Table- Supplying & Placing executive table with credenza unit in completely knock down conditions with an overall size 1500-1600mm X 1600-1800mm X 750mm that is to be assembled at site. The worktop shall have the size 1950mm X 900mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on CRCA powder coated rectangle pipe having cross-section area 40mm X 20mm with 1.6mm thick. The table shall be clad with 1mm thick modesty panel which provide structural support for the table. It should be 1mm thick with star perforation CRCA powder coated sheet in linear shape. The understructure shall consist of loop leg and C-type leg made up of CRCA powder coated triangular shape pipe having cross-section area 53mm X 53mm X 75mm with 1.6mm thick. There shall be shoe provided at the base to avoid scratches on the floor. Side top shall be provided with an overall size 800mm X 500mm X 750mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823. It shall be supported on peg which is mounted on credenza unit. The credenza unit shall have overall size 1400mm X 575mm X 500mm. It should be made up of Pre-laminated particle board of grade II of IS 12823 with drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 2 box drawer, 1 filing drawer and 1 shutter. The drawer shall be operated with roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The shutter shall be operated by SS handle and concealed crank hinge. The credenza unit shall be mounted over CRCA powder coated U shape leg having cross-section area 53mm X 53mm x 75mm with 1.6mm thick. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. For drawer pulling side wise tapered recess provided in shell behind drawer fronts . Latest ISO 9001, ISO 14001, ISO 45001, ISO 50001 compliance to be submitted by OEM and issuing agency should be registered with NABCB.The manufacturer shall have BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. complete as per sample approved by Architect & desired by Engineer-in-Charge.
1
-
42664.16
... More
Main chair for Doctor- Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm and 12mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 40Kg/m³ in back. The seat and back shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The back and base of chair shall be supplied with polypropylene bead on edges and the backrest shall be made by keeping the natural curvature of the spine with full back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be made black integral polypropylene arm mounted on powder coated round pipe frame completely joint with seat and back. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should be five legged injection moulded in black 30% glass filled nylon having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled, confirming to ANSI/BIFMA Standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 470±10 mm(W) X 460±10 mm(D) and back size shall be 460±10 mm(W) X 610±10 mm(H) from seat & overall height = 1050±10 mm. complete as per sample approved by Architect & desired by Engineer-in-Charge.
1
-
8921.92
... More
Visitor Chair for Doctor- Providing and supplying a visitor chair with ergonomic design, user comfort & aesthetically appealing. The seat and back shall be made of 12-15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40-45kg/m³ in seat & Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression and 40mm thick having density 32Kg/m³ in back, with PVC lipping all around. The same shall be upholstered with crape fabric tapestry 0.6mm thick and 235 GSM. The seat and back of chair shall be supplied with polypropylene beam on edges and the backrest shall be made by keeping the natural curvature of the spine. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine. The armrest shall be made of black integral polypropylene arm mounted on powder coated round pipe frame completely joint with seat and back. The frame structure shall be cantilever support type made up of MS CRCA black powder coated (DFT 40-60 microns) round pipe of Dia. 25.4mm with 1.6mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 48-49 cm(W) X 44-45 cm(D) and back size shall be 48-49 cm(W) X 40-47 cm(H) from seat & overall height = 80.5-82 cm, overall depth = 60-61 cm. complete as per sample approved by Architect & desired by Engineer-in-Charge.
2
-
6453.44
... More
Examination Table for Doctor Room - Providing and Placing in position Examination Table. Overall size of the table shall be 1830 mm L x 560-600 mm D x 810-850 mm H. The examination table shall be made of sturdy structure and shall have a ratchet mechanism for tilting the backrest. Leg frame and intermediate frame shall be made of 30x30 section 1.6 mm thick M.S. ERW Tube. Nylon 6 leg shoe shall be provided to avoid wear and tear of the floor. Lying surface shall be made of 1.2 mm thick M.S. ERW Tube. Ratchet shall be made of 5 mm thick M.S. ERW tube and shall provide back tilt at 0º, 15º and 30º asjustment positions. Table shall be epoxy polyxter powder coated and shall have a maximum load bearing capacity of 135 kgs. It shall be provided with 30 mm thick mattress. The bed should be provided with 40 density 30mm thick PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed. complete as per sample approved by Architect & desired by Engineer-in-Charge.
1
-
22624
... More
Stool for Doctor, Pharmacist Room & in Sampling Room - Revolving Stool, SS Top, Powder Coated, Height Adjustable (510mm - 690mm). complete as per sample approved by Architect & desired by Engineer-in-Charge.
3
-
7448
... More
Storage for Medicine - Providing, supplying and placing steel almirah. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H). The Almirah shall be supplied with 2 nos. of glass doors with 4 nos. of adjustable shelves i.e. 5 loading compartments. The glass used shall be 4mm thick clear. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg maximum. Each rack shall be provided with stiffener at bottom for strength. The entire body panel and shelf shall be made of high yield strength 0.8mm thick and door 1mm thick CRCA sheet of grade ‘D’ confirming to IS: 513. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50µ thick. complete as per sample approved by Architect & desired by Engineer-in-Charge.
1
-
31795.68
... More
Customized Lab Table- Supplying & placing storage unit with an overall size 900mm X 600mm X 760mm. It should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top of the shutter shall be 25mm thick and all other profile i.e. side, back, shutter, skirting shall be 18mm thick and the edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have 2 nos. of adjustable shelf and 4 nos. of sliding shutters shall be provided for ease of opening. The sliding shutter shall be operated on sliding rail track and SS handle as well as push lock mechanism. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. There shall be buffers provided at the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380. complete as per sample approved by Architect & desired by Engineer-in-Charge.
2
-
10640
... More
Providing and placing moveable 3-fold screen of MS fame with green coloured curtain, having arrangements that it can be removed for washing and refixed. The overall dimension of the 3-fold screen will be 1675mmx2450mm around examination table. The MS frame will be powder coated in colour as complete as per sample approved by Architect & desired by Engineer-in-Charge.
1
-
11431.84
... More
Providing and fixing Roller Blinds at the designated locations with fabric/ texture complete as per sample approved by Architect & desired by Engineer-in-Charge.
170
-
252
... More
PUBLIC HEALTH
-
-
-
... More
Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / Chinaware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.
-
-
-
... More
Eurpoean/Indian/Orissa W.C.,
1
-
230.72
... More
Wash Hand Basin / Urinal Pot
1
-
114.83
... More
Scraping
-
-
-
... More
Cement plaster
16.54
-
37.93
... More
Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base.
4.54
-
114.83
... More
Conglomerate floor 40mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling. using mechanical mixer for mixing of material
10.11
-
745.88
... More
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
10.11
-
707.95
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
41.81
-
736.4
... More
Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
-
-
-
... More
Chinaware Floor Mounted One Piece EWC rim less type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) size 69x36x74 cm with P trap or Strap and seat cover complete in all
respect.
3
-
17403.82
... More
Providing and fixing jet spray with 2'-6" long PVC pipe.
-
-
-
... More
With C.P. Brass nut
3
-
501.47
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect.
-
-
-
... More
Size 630 mm x 450 mm x 830 mm
3
-
3715.69
... More
Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)
3
-
985.02
... More
Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
-
-
-
... More
Vitreous chinaware standard white pedestal for wash hand basin.
3
-
2117.54
... More
Providing and fixing PTMT Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms of approved make (to the approval of Engineer-in-charge) for wash hand basin and sink complete in all respect.
3
-
571
... More
Providing and fixing in position C.P brass Single Lever basin mixer without Popup waste with 450 mm Long Braided Hoses approved make (to the approval of Engineerin-charge) complete in all respect.
3
-
3069.9
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.
-
-
-
... More
C.P. Brass extension piece, 25mm long to 50mm long
10
-
112.72
... More
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
C.P. Brass fittings:
-
-
-
... More
C.P. brass Bib cock with Wall flange
3
-
1694.03
... More
C.P.brass 15mm Angular stop cock with Wall flange
6
-
1079.84
... More
Providing and fixing in position towel rails /ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
... More
C.P. brass towel Rails size 15mm dia 610mm long
3
-
1621.34
... More
C.P brass towel ring
3
-
959.74
... More
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
3
-
887.05
... More
Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.
-
-
-
... More
C.P. brass toilet paper holder
3
-
1141.99
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
8
-
191.74
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
-
-
-
... More
Size 600mmx450mm
3
-
1263.15
... More
Providing and fixing in position automatic brass Ball Cock in tanks.
-
-
-
... More
Brass Ball Cock with rod and Plastic Ball
-
-
-
... More
25mm i/d
1
-
950.98
... More
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
4
-
119.05
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes (as per IS:15801-2008) SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing including testing of pipes complete as per direction of Engineer in Charge. Concealed work- including cutting chase & making good the wall etc.
-
-
-
... More
PN-16 Pipe Size 20 mm o/d
73
-
159.86
... More
PN-16 Pipe Size 25 mm o/d
25
-
202.09
... More
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
C.P.brass 15mm Concealed stop cock with flange.
3
-
1268.41
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.
-
-
-
... More
Size 75 mm x 50 mm
73
-
60.05
... More
Providing and fixing of fire extinguisher CO2 type as per IS.15683 complete with all accessories as per manufactures specification. ISI mark complete in all respect 4.5 kg Capacity
2
-
7150.1
... More
Excavation manually in trenches with straight or open cutting in built up street/ lane having wall to wall width of street/ lane upto 3.0 metre, for intramural sullage drains, extramural intercepting drains and outfall drains, storm water channels and other work contingent or incident thereto, to full dimensions and depth as shown on the drawings or as shall be required by Engineerin-charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic. Providing and fixing and maintenance of caution boards, fencing, night signals, for leads upto 15m and for all lifts and subsequent refilling, watering and dressing upto groung level, including removal of surplus spoil from the site upto 15 metre distance complete in all respects.
-
-
-
... More
All classes of soil except rocky
12
-
171
... More
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
-
-
-
... More
Single Socket Type B
-
-
-
... More
160mm o/d SWR UPVC pipe lines laid complete
15
-
645.13
... More
110mm o/d SWR UPVC pipe lines laid complete
10
-
396.16
... More
Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.
3
-
3146.8
... More
Providing and fixing in position water cooler semi steel body 80/120 ltr capacity with stabilizer of approved make ( to the approval of Engineer in charge) including carriage complete in all respect.
1
-
41804.99
... More
Providing and fixing in position UV filter having flow rate of 200 ltrs per hour three stage purification process having 16 watt UV lamp and 35 watt power rating of approved make ( to the approval of engineer incharge) including carriage and fixing in position complete in all respect.
1
-
15475.92
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
... More
For 110mm o/d pipes
-
-
-
... More
Single Tee
3
-
206.15
... More
Door Elbow 90 Degree (All side socketed)
3
-
198.09
... More
P Trap/Floor Trap 110mm x 110mm
8
-
338.17
... More
Single Y-Junction
3
-
239.88
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
-
-
-
... More
Triple Layer Tanks
1000
-
11.38
... More
Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
-
-
-
... More
25mm i/d Gun Metal peet valve heavy pattern.
1
-
814.31
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
... More
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
2
-
12120.52
... More
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
... More
G.I. tank nipple 25mm i/d
1
-
198.82
... More
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
-
-
-
... More
25mm i/d G.I. Union
1
-
200.57
... More
PVC solution
2
-
220
... More
Bend 45 degree
2
-
120
... More
Providing and Installing & erection split type wall mounted air conditioner capacity 1.5 tonne 5 star make carrier, hitachi, voltas, blue star, diakin or equilant with 4.00 KVA voltage stablizier, MCB arrangements for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD unit stand for OD unit and connection of 3 mtr concealing copper pipes within building and installing charges complete in all respect.
1
-
59160
... More
ELECTRICAL
-
-
-
... More
Providing Internal Electrical Installations:
-
-
-
... More
POINT WIRING:
-
-
-
... More
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring fan point (with fan box )
7
-
1148.75
... More
Wiring light point
34
-
723.75
... More
Wiring call-bell point
1
-
706.25
... More
Wiring 6 Amp. wall socket point
11
-
587.5
... More
Wiring 6 Amp. Plug control comprising wall socket point
3
-
352.5
... More
Wiring 16/20 amp. power plug control point
7
-
453.75
... More
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
-
-
-
... More
Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
3
-
784.8
... More
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).
4
-
672
... More
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring Telephone socket point RJ11 (one module)
2
-
337.2
... More
Wiring Networking socket point RJ45 (one module)
4
-
438
... More
SUPPLY AND ERECTION OF WIRING ACCESSORIES:
Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-
-
-
-
... More
Ceiling Rose (Flush Piano type)
7
-
34.5
... More
Call Bell 220/230 volts AC Ding Dong
1
-
125.35
... More
COPPER WIRES & CONDUIT PIPE:
-
-
-
... More
PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
Overall size 1sq.mm (Un-sheathed)
200
-
18.2
... More
Overall size 1.5sq.mm (Un-sheathed)
150
-
23.4
... More
Overall size 2.5sq.mm (Un-sheathed)
270
-
35.1
... More
Overall size 4sq.mm (Un-sheathed)
180
-
50.7
... More
Overall size 10sq.mm (Un-sheathed)
100
-
114.4
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)
50
-
54.6
... More
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
200
-
67.2
... More
Heavy gauge PVC conduit pipe 32mm dia. (ISI marked) Flushed
40
-
92.4
... More
Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
-
-
-
... More
PVC flexible pipe 25mm dia.
30
-
17
... More
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
... More
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan.
12
-
125
... More
G.I. EARTHING :- Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).
-
-
-
... More
Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length)
2
-
3147.5
... More
G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH):
Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (Flushed in wall and floor) with sockets, elbows and Steel hooks including the cost of cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Additional length G.I. wire 8 S.W.G. (4mm dia.) in 15mm dia. G.I. pipe (Flushed)
10
-
211.4
... More
Copper Earthing
-
-
-
... More
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
1
-
10578.4
... More
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
... More
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)
10
-
309.4
... More
MCB'S & MCB DISTRIBUTION BOARDS:
-
-
-
... More
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Single Pole 6-32amp. (10kA, Curve-C)
22
-
180.9
... More
MCB Double Pole 40amp. (10kA, Curve-C)
1
-
749.25
... More
MCB Four Pole 40amp. (10kA, Curve-C)
3
-
1453.95
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
1
-
1661.85
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
... More
SP&N Double Door Distribution Board 12 way each.
1
-
1706.6
... More
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
-
-
-
... More
TP&N Double Door Vertical DB's 4 way each (With provision of FP MCCB upto 125amp)
1
-
7250.75
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
... More
MCCB Four Pole 40/63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
-
6290
... More
LT CABLES
-
-
-
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
... More
Overall size 16sq.mm (4 Core) Un-armoured (Loose) For PSPCL supply
50
-
125
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
... More
Double walled corrugated (DWC) HDPE pipe 63/51 mm (outer/ inner dia.)
40
-
148
... More
SHEET METAL IRON CLAD SWITCHES:
Supply and erection of sheet metal Iron Clad Switches on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications:-
-
-
-
... More
ICTPN Switch 63amp., 415volts
1
-
3920.4
... More
SHEET METAL IRON CLAD CHANGEOVER SWITCHES:
Supply and erection of sheet metal Iron Clad Changeover Switch on existing surface with G.I. bolts & nuts/rag bolts and nuts etc., according to the size of holes in the body of the switch including connections with suitable size of thimbles and bonding to the existing earth as per PWD General Specifications:-
-
-
-
... More
ICDP Changeover Switch 63amp., 415volts
1
-
3271.05
... More
AUTOMATIC VOLTAGE STABLIZER:
-
-
-
... More
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
-
-
-
... More
Automatic Voltage Stablizer 3 KVA
2
-
5903.3
... More
LED'S FIXTURES & FANS:
-
-
-
... More
Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021.
3
-
737
... More
Supply and erection of LED batten 40watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021.
1
-
1051
... More
Supply and erection of Slim Recessed mounted, Round downlighter 18 watt with Pressure die cast aluminium housing & polycarbonate diffuser and efficacy of LED fixture minimum 100 lumens per watt complete in all respects as approved and desired by the Engineer in-charge at site. The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021.
10
-
2109
... More
Supply and erection of Recessed mounted 36watt LED panel (including LED driver) with CRCA sheet having efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021.
12
-
3918
... More
Supply and erection of LED Street Light 45 watt (including LED driver) with pressure die cast aluminium housing with control gear ( IP 66 protection),THD 10%, CRI minimum 70, High power LED with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, efficacy of LED fixture minimum 120 lumens per watt, complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to CM Punjab vide letter No. AT-2021/GL 1410-1422 Dated 06/05/2021
3
-
4365
... More
Supply and erection of Ceiling Fan 1200mm (48") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. The fan should conform to Technical Specifications attached.
7
-
2930
... More
Supply and erection of Ventile Air Fan 225/230mm with aluminium louver shutter longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. The fan should conform to Technical Specifications attached.
2
-
2156
... More
SITC of Wall Fan Size 400MM complete in all respect as approved and desired by the Engineer in-charges at site. The fan should conform to Technical Specifications attached.
1
-
3089
... More
Providing -2Way Phone, Patient Token System,Local Area Networking :
-
-
-
... More
Supply Installation Testing and Commissioning of 10 port 10/100 PoE switch, 8*10/100 PoE port + 2 10/100 uplink, power budget 120W, IEEE 802.3af/at extended range 250 mtr complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.
1
-
6625
... More
Supply, installation, testing & commissioning of Category 6 UTP , 4 Pair This cable well exceeds the requirements of TIA/EIA-568-C.2 and IEC/ISO 11801. Construction: 4 twisted pairs separated by cross separator, 4 channel, polymer spine / full separator. Half shall not be accepted. Cable should be Armoured. Operates at bandwidth of 250 MHz, Conductor Solid Bare Electronic Grade Copper. Inner jacket should be PVC and outer should be PE, suitable for direct burial. Insulation: Polyethylene, Attenuation ( 36 db/100m), Pair – to – pair and PS NEXT, ELFEXT and PSELFEXT, Return Loss, ACR and PS ACR., Nominal Outer Diameter of Cable should be 9.70 mm and Conductor Diameter 0.56 mm (23 AWG), Cable should support operating Temperature from -20° to +60°C, Cable should come with printed sequential Length Counter on each meter, Cable support Conductor Resistance 93.5 OHMS/1000MTR@20 Degree, Mutual Capacitance of cable should be 5.6nF/100m, Max Resistance Unbalance of cable should be 5% Max, Capacitance Unbalance of cable should max 330pF/100m, Cable support Delay Skew: 45nS, Operating Voltage: 72V and NVP: 69%, Shall Supports Gigabit Ethernet (1000 base-T) standard and Operates at bandwidth of 250MHz complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.
200
-
57
... More
Supply, installation, testing & commissioning of 1 KVA UPS with Input power factor - 0.99, Output power factor - 0.8, OVCD inbuilt , DC V 36v, Efficiency : Above 90%. .complete in all respects as approved and desired by the Engineer-in-charge at site
1
-
10407
... More
S/I/T/C of intercom facility 1+1 Basic Plan Phone Ringer volume control switch Tone/ Pulse Switchable Redial Mute Flash Pause Intercom facility Call T, Holding the line / Music on Hold during call transfer Line use LED Indication, Secrecy during conversation between both phones, including connecting cables complete in all respect as approved and desired by the Engineer in-charges at site
1
-
5163
... More
S/I/T/C of Token Calling Display System having screen size 4 inches, Voice calling/ Bell System, complete key pad Etc, calling display up to 60 meter cable (5 meter length included), serial communication design, Text Color Red Display Shape Rectangle,Power 5 W,Sound Type Mono Display Technology 7 Segment Voltage 220-240 V AC Suitable for Clinic, Hospital,Cash counter etc, Warranty 1 Year,220 VAC Operating Voltage Character Capacity 3 Character, Power Consumption,Rectangular Metal body ,complete in all respect as approved and desired by the Engineer in-charges at site
1
-
10725
... More
Supply and erection of Wall Mounted 6U Rack with power point and fan. complete in all respect as approved and desired by the Engineer in-charges at site
1
-
5720
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
30
-
67.2
... More
Providing Double Door Refrigerator,Water Dispenser and Split air conditioner:
-
-
-
... More
Supply,Installation and Comissioning of Frost Free Double Door Refrigerator capacity 250 Ltr - 265 Ltr complete in all respect. The Refrigerator shoud also conform to technical specifications attached herewith. Complete in all respect as approved and desired by the Engineer in-charges at site
1
-
30807
... More
Supply ,erection,testing & commissioning of Invertor 2200VA,connections and testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site.
1
-
11884
... More
Supply ,erection,testing & commissioning of12volt- 200 AH Battery including connections and testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site.
2
-
17878
... More
Cultural Cess 1%
1972871.95
-
0.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements