Public Works Department Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 2,42,305Document Cost
₹ 10,000Tender Fee
₹ 5,900
Summary
Construction Of Integrated Public Health Lab Iphl In District Hospital Amritsar
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CEPW_131972_1Tender No
EE/PD/Asr/21 Dated 24.12.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Stripping and stacking slate or tiles of a roof.
498.7
46
23114.75
... More
Dismantling concrete
Cement concrete plain 1:3:6 mix
4.9
1028
5038.28
... More
Scraping
-
-
-
... More
White wash and colour wash
217.18
7
1600.62
... More
Cement plaster
32.54
37
1234.24
... More
Cement concrete 1:3:6 with stone ballast or shingle 40 mm guage. using concrete mixing volumetric type
-
-
-
... More
Second Floor
4.46
4556
20324.18
... More
Extra rate for Second Floor
4.46
190
850.43
... More
Third Floor
0.33
4556
1503.81
... More
Extra rate for Third Floor
0.33
190
62.92
... More
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
17.84
191
3420.64
... More
Earth work excavation in ordinary soil, exclusive of compensation of earth:- Earth work undressed with a combined lead upto 15 metres including breaking of clods.
50.59
114
5809.25
... More
Cement concrete 1:5:10 with 40 mm gauge stone ballast. using concrete mixing volumetric type
3.71
4018
14907.86
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
9.53
5829
55551.04
... More
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
3.73
6205
23146.03
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
11.17
221
2471.25
... More
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
-
-
-
... More
Total all Floors
135.48
5973
809276.23
... More
Extra rate for First Floor
76.95
153
11835.68
... More
Extra rate for Second Floor
35.07
307
10788.23
... More
Extra rate for Third Floor
2.31
461
1065.9
... More
Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.
-
-
-
... More
Door Lintels
-
-
-
... More
Total of all Floors
2.35
6725
15805.63
... More
Extra rate for First Floor
1.8
190
343.22
... More
Extra rate for Second Floor
0.28
381
106.78
... More
Shelves
-
-
-
... More
Total of all Floors
4.05
6725
27239.49
... More
Extra rate for First Floor
3.82
190
728.4
... More
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.
-
-
-
... More
Beams
-
-
-
... More
Total all Floors
23.38
6995
163554.56
... More
Extra rate for First Floor
21.19
190
4040.51
... More
Extra rate for Second Floor
1.73
381
659.77
... More
Columns (Rectangular & Square)
-
-
-
... More
Total all Floors
17.34
6995
121301.8
... More
Extra rate for First Floor
16.23
190
3094.74
... More
Extra rate for Second Floor
1.11
381
423.32
... More
Slab
-
-
-
... More
Total all Floors
77.62
6995
542989.93
... More
Extra rate for First Floor
71.96
190
13721.33
... More
Extra rate for Second Floor
4.11
381
1567.43
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
-
-
-
... More
Total all Floors
715.3
560
400897.04
... More
Extra rate for First Floor
664.34
10
7002.14
... More
Extra rate for Second Floor
715.3
21
15071.37
... More
Centering and shuttering for columns (circular or curved in plain)
-
-
-
... More
Total all Floors
177.04
507
89899.14
... More
Extra rate for First Floor
165.52
10
1744.58
... More
Extra rate for Second Floor
11.52
21
242.73
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
-
-
-
... More
Total all Floors
205.84
400
82403.93
... More
Extra rate for First Floor
183.92
10
1938.52
... More
Extra rate for Second Floor
16.08
21
338.81
... More
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure.
419.29
804
337343.96
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
-
-
-
... More
With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile confirming to ISO 5 (class 100) specifications
300.18
2272
682129.03
... More
12.5mm thick cement plaster 1:5.
-
-
-
... More
Total All Floor
622.12
194
121288.52
... More
Extra rate for First Floor
546.54
2
1153.2
... More
Extra rate for Second Floor
28.78
4
121.16
... More
20 mm thick cement plaster 1:5 in two coats work.
622.12
266
165882.08
... More
Extra rate for First Floor
546.54
2
1153.2
... More
Extra rate for Second Floor
28.78
4
121.16
... More
12.5 mm thick cement plaster 1:4.
387.08
203
78728.2
... More
Extra rate for First Floor
209.19
3
661.04
... More
Extra rate for Second Floor
152.12
6
961.4
... More
Extra rate for Third Floor
14.66
9
138.98
... More
20 mm thick cement plaster 1:4.
387.08
280
108514.01
... More
Extra rate for First Floor
209.19
3
661.04
... More
Extra rate for Second Floor
152.12
6
961.4
... More
Extra rate for Third Floor
14.66
9
138.98
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS Clamp
-
-
-
... More
U-PVC pipes (working pressure 4 kgf. / sqcm) pipe 110 mm dia.
114.45
265
30384.19
... More
Providing and fixing U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
-
-
-
... More
UPVC 110 mm bend
16
142
2275.52
... More
Providing and fixing SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
-
-
-
... More
UPVC 110 mm Coupling /Sockets
16
88
1415.84
... More
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
16
106
1698.72
... More
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
16
729
11668.32
... More
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
16
87
1405.92
... More
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on
another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
-
-
-
... More
Total all Floors
547.75
793
434793
... More
Extra rate for First Floor
518.37
3
1638.05
... More
Extra rate for Second Floor
29.38
6
185.68
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
125.93
71
8976.29
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material
22.42
493
11060.01
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
-
-
-
... More
Total all Floors
596.46
203
121224.53
... More
Extra rate for First Floor
466.28
3
1473.44
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
-
-
-
... More
Total all Floors
7.98
3457
27592.05
... More
Extra rate for First Floor
4.81
3
15.2
... More
Marble stone flooring with 12-15 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
Udaipur Green Marble Tiles of thickness 12mm to 15mm
Slabs sizes above 0.50 sqm
-
-
-
... More
Total all Floors
186.57
1217
227225.47
... More
Extra rate for First Floor
77.92
3
246.23
... More
Extra rate for Second Floor
1.12
3
3.54
... More
Marble work of thickness 12-15 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).
Udaipur Green Marble Tiles of thickness 12mm to 15mm
Slabs sizes above 0.50 Sqm
-
-
-
... More
Total all Floors
32.21
1564
50392.87
... More
Extra rate for First Floor
16.29
3
51.48
... More
Extra rate for Second Floor
0.38
3
1.2
... More
Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness andcolouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects.respects.
207.4
130
27092.66
... More
Providing and Laying Out Door Precast Designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3(1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
-
-
-
... More
Ground Floor
13.38
1086
14534.16
... More
Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.)
114.48
187
21467.29
... More
Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.)
43.27
448
19419.14
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
Size 600x600 mm
-
-
-
... More
Total Qty for all floor
405.4
1503
609498.63
... More
Extra rate for First Floor
353.7
3
1117.69
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge
Size 600x600 mm.
405.4
130
52957.4
... More
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
-
-
-
... More
Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.
133.52
527
70434.47
... More
Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
268.84
603
162373.98
... More
Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitred and electrically flash-welded, with iron fittings incluidng necessary iron handles,hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire guage) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire guage and grill will be paid as per respective items)
1174.14
145
171412.7
... More
Wire gauge fixed on steel windows of standard rolled steel section, with 3mm thick flat iron cover moulding of 12.5mm width, fixed with machine screws, complete in all respects.
27.27
954
26028.4
... More
Extra for providing & fixing Steel Tube beading size 12mm x 12mm, 18 guage of approved shape and section with screw for fixing of glass panes in stead of glazing clips and metal slash putty in steel doors, windows & Ventilators complete in all respect
419.34
70
29689.27
... More
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm
exceeding 0.4 sqm of area
-
-
-
... More
Float glass panes of 5mm thickness
63.91
629
40262.66
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
-
-
-
... More
Total of all Floors
66.62
902
60151.86
... More
Extra rate for First Floor
34.99
3
110.57
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) :
-
-
-
... More
For fixed portion & Chaukhat
200.88
370
74492.33
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
200.7
387
77809.38
... More
Providing Polyster Powder coating 50 micron any coloured specrified to aluminium section of various sizes including carrriage of material from marktet to workshop .
401.58
71
28769.19
... More
Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge.
6mm thick ACP Sheet
17
3281
55788.05
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item)
Float glass panes of 5 mm thickness
8.08
1090
8810.19
... More
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1) (1999)
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-
35mm thick
39.9
2430
96973.76
... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (including cost of glass) Rectangular or square
17
403
6859.33
... More
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
For shutter area above 0.50 sqm
59.97
116
7012.89
... More
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
... More
300mm x 16mm
3
209
628.95
... More
250mm x 16mm
14
192
2699.06
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete
I.S.I Designation No. III (size of door 851mm to 1000mm)
10
1380
13800.9
... More
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
10.32
10798
111445.16
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete.
10
361
3613.5
... More
Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects.
15.09
956
14434.79
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending.) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
20.66
1300
26858.41
... More
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
-
-
-
... More
Total all Floors
170.88
7876
1346006.38
... More
Extra rate for First Floor
145.41
13
1992.12
... More
Extra rate for Second Floor
16.89
27
462.62
... More
Extra rate for Third Floor
0.55
41
22.6
... More
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.
206.91
297
61470.89
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
2343.83
84
197537.99
... More
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
1461.39
79
115464.42
... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
159.51
25
4032.41
... More
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
89.78
45
4067.03
... More
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
89.78
29
2648.51
... More
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
249.29
69
17333.13
... More
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
882.44
145
128289.13
... More
Disposal of Malba outside the premises including loading and unloading as desired by Engineer in charge.
16.03
226
3624.86
... More
Total A1:-
-
-
-
... More
Credit of Material to be received from dismentling
-
-
-
... More
Tile from dismenling of tile terracing
11063
3
-33189
... More
Brick/Tile bats
7.98
531
-4237.38
... More
Old/ Rusted Steel from Dismentling of RCC
1.87
2500
-4675
... More
Total 2:-
-
-
-
... More
Total A1+A2:-
-
-
-
... More
PUBLIC HEALTH SERVICE
-
-
-
... More
Sub Work-1
-
-
-
... More
Sub Head-1 Internal Sewerage System
-
-
-
... More
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
Single Socket Type B
-
-
-
... More
110mm o/d single socket SWR UPVC pipe lines laid complete
42.06
396
16662.49
... More
75mm o/d single socket SWR UPVC pipe lines laid complete
135.32
306
41518.88
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
... More
For 110mm o/d pipes
-
-
-
... More
Elbow 90 Degree (All side socketed)
6
162
975.42
... More
Vent Cowls
2
45
90.8
... More
Coupler
8
111
888.72
... More
Single Tee With Door
4
236
945.28
... More
For 75mm o/d pipes
-
-
-
... More
Elbow 90 degree (all side socket)
6
74
448.26
... More
Vent Cowls
6
31
188.58
... More
Coupler
29
74
2166.59
... More
Single Tee With Door
17
159
2704.87
... More
Floor Trap 110mm x 75mm
15
309
4649.85
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge)
-
-
-
... More
110mm o/d
455
101
46077.85
... More
90mm o/d
374
85
32055.54
... More
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
-
-
-
... More
M.S. Holder bats clamps for 100mm i/d as per table-1
6
217
1303.08
... More
M.S. Holder bats clamps for 75mm i/d as per table-1
18
202
3651.12
... More
Core cutting in RCC slab 125mm dia or 150mm dia withe the help of core cutting machine as per requirement at site & as desired by Engineer-in-Charge.
16
702
11232
... More
Providing and fixing galvonised hanging clamp 100mm dia chimney type for PVC pipe, 12mm galvonised fully thread bar with nut bolt as per requirement at site & as desired by Engineer-in-Charge.
16
398
6368
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
-
-
-
... More
100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
as per table-1
4
1930
7720.04
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight
as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
-
-
-
... More
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
4
6780
27121.32
... More
Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects.
-
-
-
... More
uPVC Pipe 6 Kgf/cm2
50mm i/d as per table-1
23.47
181
4259.1
... More
Total Sub Head-1:-
-
-
-
... More
Sub Head-2 Internal Water Supply System
-
-
-
... More
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
... More
CPVC SDR 11 Pipe & fitting 16mm o/d
24.38
188
4590.27
... More
SDR 11 CPVC pipes & fittings 20mm o/d
45.72
233
10661.45
... More
CPVC SDR 11 Pipe & fitting 25mm o/d
45.72
301
13763.55
... More
CPVC SDR 11 Pipe & fitting 50mm o/d
30.48
790
24108.46
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
45.72
72
3323.39
... More
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
... More
Through wall 11.43 cm thick Detail as per Table-2
14
176
2469.88
... More
Through wall 22.86 cm thick Detail as per Table-2
14
251
3523.94
... More
Providing, fixing and jointing Cpvc Union Couplings with Upvc Pipes complete in all respect.
-
-
-
... More
20mm i/d Cpvc Union
12
136
1643.52
... More
25mm i/d Cpvc Union
12
179
2149.32
... More
Providing, fixing and jointing CPVC Ball valves screwed with CPVC ball & spindle & Teflon seats, on CPVC Pipe lines including all carriages complete.
-
-
-
... More
25mm i/d Brass Ball valves
5
555
2779.25
... More
50mm i/d Brass Ball valves
2
1796
3593.06
... More
Total Sub Head-2:-
-
-
-
... More
Sub Head - 3 Sanitary Installation
-
-
-
... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
Detail attached as per Table-3
4
5035
20142.92
... More
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut
Detail attached as per Table-3
4
381
1525.48
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
Detail attached as per Table-3
4
87
349.76
... More
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube
connection 300 mm long complete.
2
6901
13802.96
... More
Vitreous white Chinaware Partition
Large partition size 75 x 16.5 x 36.5 cm
2
4900
9801.76
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.
-
-
-
... More
Size 49 cm dia (above counter round)
2
4961
9923.98
... More
Size 550 mm x 400 mm x 815mm
2
3807
7614.7
... More
Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineer-in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect.
-
-
-
... More
Size 470mmx370mmx180mm
6
6769
40618.74
... More
Providing and fixing in position C.P elbow action pillar tap of approved make (to the approval of Engineer-in-charge) complete in all respect. (Difference in cost of between Elbow action pillar tap and Normal Pillar tap)
6
1237
7427.16
... More
Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
2
2117
4235.08
... More
Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.
-
-
-
... More
Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm
2
8154
16308.18
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 375 mm with PTMT nut
29
122
3544.09
... More
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
23
119
2738.15
... More
Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-in-charge) complete in all respect.
6
1182
7092.18
... More
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
... More
C.P. brass towel Rails size 15mm dia 610mm long
6
1621
9728.04
... More
C.P brass towel ring
4
959
3838.96
... More
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
4
888
3552.4
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
-
-
-
... More
C.P. brass Bib cock long nose/ long body without flange
8
1214
9717.52
... More
C.P Brass bib cock foam flow without flange
4
966
3864.24
... More
Providing & Fixing in postion CP Brass Spout Operated Pillar Tap with base flange (for foot operated valve) of approved make (to the approval of Engineer-in-charge) complete in all respect (instead of Pillar tap in Lavatory Suites).
2
714
1428.54
... More
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
C.P.brass 15mm Angle valve without flange
29
870
25235.51
... More
C.P.brass 15mm Concealed stop cock with flange
4
1268
5073.64
... More
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
45
66
2986.65
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect.
C.P. Brass extension piece, 25mm long to 50mm long
45
112
5072.4
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)
4
1263
5052.6
... More
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
C.P. Brass Accessories:
-
-
-
... More
C.P. brass toilet roll holder with flap
4
1174
4698.6
... More
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
4
386
1546.52
... More
Providing and fixing divertors of approved make (to the approval of Engineer-in-charge ) for bath and shower system complete in all respect.
8
5264
42114.72
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
2000
11
22760
... More
Providing and fixing in position automatic brass Ball Cock in tanks.
Brass Ball Cock with rod and Plastic Ball
-
-
-
... More
Brass Ball Cock with rod and Plastic Ball 32mm i/d
1
1599
1599.98
... More
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
... More
G.I. tank nipple 25mm i/d
1
198
198.82
... More
G.I. tank nipple 40mm i/d
1
377
377.1
... More
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
-
-
-
... More
For 2000 ltr Water Tank
1
9556
9556
... More
Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.
-
-
-
... More
35mm dia 900mm (36”) long
12
1833
21997.08
... More
35mm dia 1200mm (48”) long
12
2809
33716.16
... More
Foldable U Type 762mm long
12
6652
79834.2
... More
Total Sub Head-3:-
-
-
-
... More
Sub Head-4 Flooring and Wall Tile
-
-
-
... More
Screed of 50mm thick cement concrete 1:8:16 with stone aggregate 40mm gaugeto be laid below the topping using mechanical mixer for mixing of material
-
-
-
... More
Total All Floor
35.79
203
7273.96
... More
Extra rate for First Floor
35.79
3
113.1
... More
Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete .
-
-
-
... More
First Floor
35.79
895
32052.81
... More
Extra rate for First Floor
35.79
3
113.1
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm).
39.37
527
20762.16
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
-
-
-
... More
Total All Floor
184.77
902
166830.68
... More
Extra Rate for First Floor
184.77
3
583.87
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps..
-
-
-
... More
First Floor
50.56
3457
174818.78
... More
Extra Rate for First Floor
50.56
3
159.77
... More
Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.)
59.53
187
11163.07
... More
Total Sub Head-4:-
-
-
-
... More
Sub Head -5 Water Coller
-
-
-
... More
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
... More
Water Cooler Full Steel Body 150/150 ltr without Stablizer
Detail as per Table-3
1
46849
46849.15
... More
Providing & fixing in position UV filter having
flow rate 200 ltr/hr with 3 stage purification
process having 16 watt UV lamp and 35 Watt
power rating of approved make (to the
approval of Engineer-in-charge ) including
carriage and fixing in position complete in all
respect.
1
13369
13369.97
... More
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
-
-
-
... More
Automatic Voltage Stablizer 2 KVA Drinking Water Cooler
1
5008
5008.44
... More
Total Sub Head-5:-
-
-
-
... More
Sub Work-3
-
-
-
... More
Sub Head-3.1
-
-
-
... More
Sub Head-1 Estate Sewerage
-
-
-
... More
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
-
-
-
... More
110 mm o/d pipes
24
599
14381.52
... More
160 mm o/d pipes
24
1253
30081.36
... More
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
-
-
-
... More
For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L.
For all classes of soil except rocky
24.34
121
2948.79
... More
Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.
22.6
687
15544.96
... More
Total Sub Head-3.1:-
-
-
-
... More
Sub Work-5
-
-
-
... More
Fire Fighting Arrangements
-
-
-
... More
Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
4.5kg capacity
4
7150
28600.76
... More
Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 6kg Capacity
4
2940
11761.2
... More
SITC of MS Pipe
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
-
-
-
... More
65mm internal diameter
3
860
2580.78
... More
80mm internal diameter
3
1045
3137.31
... More
100mm internal diameter
24.38
1517
37007.62
... More
SITC of Butterfly valve
Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.
-
-
-
... More
80 mm i/d for Yard Hydrants
2
2703
5406.84
... More
100 mm i/d for Internal Hydrants
2
3431
6862.08
... More
Proving & fixing Dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete.
-
-
-
... More
100mm i/d check valve
2
4688
9377.14
... More
Providing and fixing S.S Pressure Gauge complete as required complete in all respect.
-
-
-
... More
Dial diameter 100mm calibration 0-16 Kg
2
809
1619.26
... More
Providing and fixing fire brigade inlet connection of cast iron body with Gun metal 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904. (to be connected to static tank).
-
-
-
... More
Four Way inlet connection
1
9743
9743.88
... More
Supplying, Installation, Testing and Commissioning of G.M Single headed hydrant valve with instantaneous Gun metal peet coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (TypeA) with blank Gunmetal Cap and chain including orifice plate made of 6mm th Stainless steel to keep the pressure not more than 3.5 per sqcm at any point complete in all respects.
6
6784
40707.42
... More
Supplying, Installation, Testing and Commissioning 63 mm dia gun-metal Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Gun metal nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.
4
2047
8189.8
... More
Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A, IS:636, 63mm dia x 15m long with gunmetal male & female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required.
2
4711
9422.18
... More
Supplying, Installation, Testing and Commissioning of Non-percolating flexible CP HOSE as per IS:8423 / 1994 ISI marked 63mm dia x 15 m long complete with instantaneous type gun-metal 63 mm dia male & female coupling (IS: 903) bound and riveted to hose pipes.
8
4197
33577.92
... More
Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 meter long type-2, hose reel Drum with bracket as per IS:884, 20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with main pipe complete in all respect.
2
9532
19064.14
... More
Supplying, Installation, Testing and Commissioning standard Fire Man's axe with heavy insulated rubber conforming to IS 936 complete in all respect.
2
848
1697.92
... More
Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc.
-
-
-
... More
900 mm wide x 600 mm high x 500 mm deep Size (for Yard Hydrant)
2
5541
11083.24
... More
600 mm wide x 600 mm high x 300 mm deep Size - (for RRL Reel)
2
4324
8648.6
... More
Providing & fixing Fire Hydrants with jointing including all carriages complete. (without Fire Hydrant surface box) Size 80mm complete in all respect.
-
-
-
... More
C.I Fire Hydrants S.V. Type IS-909 for Internal Hydrants
2
12522
25045.98
... More
C.I Fire Hydrants 1S-908 for Yard Hydrants
2
7133
14266.34
... More
C.I Fire Hydrants Stand Post Type IS-908
2
11189
22379.76
... More
Supplying & fixing air vessel made out of 250mm. Dia, 8 mm thick MS sheet, 1200mm height with air release valves on top and flanged connection to risers, drain arrangements with 25 mm dia gunmetal wheel valves, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required
1
18343
18343.56
... More
Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all respect
1
3799
3799.27
... More
Supplying and Installation control valve C/W water motor gong complete with alarm Valve, constant trim, water motor bell, 2No. Pressure Gauge. All parts UL listed. complete in all respect.
-
-
-
... More
100 mm control valve
1
27843
27843.88
... More
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts.
-
-
-
... More
100mm internal diameter
9.14
2428
22197.77
... More
XLPE INSULATED ARMOURED CABLES (UNDERGROUND):
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1metre below ground level including excavation, sand cushioning, covering with sand & First Class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-
-
-
-
... More
Overall size 16sq.mm (3Core) Armoured (Underground)
15
497
7466.7
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks
5000
11
56900
... More
Providing and fixing in position automatic brass Ball Cock in tanks.
Brass Ball Cock with rod and Plastic Ball
-
-
-
... More
Brass Ball Cock with rod and Plastic Ball 32mm i/d
1
1599
1599.98
... More
Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
-
-
-
... More
G.I. tank nipple 40mm i/d
1
377
377.1
... More
Construction of Plateform complete as per specification & as desired by Enginer-in-charge
-
-
-
... More
For 5000 ltr Water Tank
1
13399
13399
... More
Supply Installation, testing & commissioning of pump having 65mm suction, 50mm delivery, CI casing, bronze impeller and C-40 shaft with gland packed arrangement coupled on common base plate to Make Kirloskar/ABB/CGL or its equivalent make 7.5 kw/10HP, 2935RPM TEFC sq cage induction motor supply confirming to through suitable flexible coupling The pump set is suitable for following duties the pump is designed following duties total head 35 mtr flow 450 LPM including cost of Electrical control panel complete in all respect as per specifications.
1
42142
42142.86
... More
Total Sub Work-5:-
-
-
-
... More
Total Sub Work 1+2+3+4+5:-
-
-
-
... More
Electrical Services
-
-
-
... More
Providing Internal Electrical Installations:
-
-
-
... More
POINT WIRING:
-
-
-
... More
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring fan point with sheet metal fan box
37
1210
44777.77
... More
Wiring light point
84
762
64047.48
... More
Wiring call-bell point
1
744
744.03
... More
Wiring 3 pin 6 Amp. wall socket point
4
618
2475.72
... More
Wiring 3 Pin 6 Amp. Plug control comprising wall socket point
10
371
3713.6
... More
Wiring 3 pin 16/20 amp. power plug control point
58
478
27725.74
... More
Wiring light point without control switch.
43
334
14383.07
... More
RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
15
826
12401.85
... More
RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).
1
707
707.95
... More
SUPPLY AND ERECTION OF WIRING ACCESSORIES:
Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-
-
-
-
... More
Ceiling Rose (Flush Piano type)
3
36
109.05
... More
Call Bell 220/230 volts AC Ding Dong
1
132
132.06
... More
LED'S FIXTURES & FANS:
-
-
-
... More
Supply and erection of Slim Recessed mounted, Round downlighter 15 watt with Pressure die cast aluminium housing & polycarbonate diffuser with surge protection 10KV and efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 %, housing & driver shall be of same brand, supported with LM 79 reports not more than 2 years old from NABL /UL accredited laboratory complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. The certification and specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
20
1572
31440
... More
Supply and erection of Slim Recessed mounted, Round downlighter 18 watt with Pressure die cast aluminium housing & polycarbonate diffuser with surge protection 10KV and efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 %, housing & driver shall be of same brand, supported with LM 79 reports not more than 2 years old from NABL /UL accredited laboratory complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. The certification and specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
71
1717
121907
... More
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
7
791
5537
... More
Supply and erection of LED batten 40 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
12
1066
12792
... More
Supply and erection of Recessed mounted 36watt LED panel (including LED driver) with CRCA sheet having efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
20
3722
74440
... More
Supply and erection of BEE 3-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single Phase with double ball bearing, copper wound, full aluminium body 3 Nos of Blades, white in colour, The mounting type is down rod mount. The product should possess a minimum air delivery of 218 CMM. The rated speed of the product must be minimum of 350 revolutions per minute and 5 Nos of speeds. The product should have a manufacturer's gurantee waranty of minimum 2 years. The product should be complete in all respects with fan motor, blade set down rod, conopy set, shackle kit, twisted wire etc. including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core coper conductor (FR) cable 0.75 sq.mm complete in all respects as per satisfaction of the Engineer-in-Charge at site Make
37
3520
130240
... More
Supply and erection of Wall Fan Plastic Body 400MM, 16" including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
4
3385
13540
... More
Supply and erection of Heavy duty Exhaust Fan 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.
3
4846
14538
... More
OCCUPANCY SENSORS:
-
-
-
... More
Supply and erection of Ceiling mounted Occupancy based PIR sensor (360 degree)with installation height 2.5mts ,8.5 Amps resistive load, Detection dia 8M,time delay - 5s to 59 mins , Light level threshold - 5 to 1275 Lux ,IP - 20,Sensitivity Adjustment, Walk LED test, with additional options like walkthrough, daylight set point, vacancy .
3
3614
10842
... More
SUSPENSION RODS FOR CEILING FANS:
-
-
-
... More
HEAVY GUAGE WELDED CONDUIT PIPES:
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
... More
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan.
15
131
1975.35
... More
CONDUIT PIPE & COPPER WIRES:
-
-
-
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy gauge PVC conduit pipe 20mm dia. (ISI marked) Flushed
610
60
36886.7
... More
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
300
70
21240
... More
Heavy gauge PVC conduit pipe 32mm dia. (ISI marked) Flushed
20
97
1946.8
... More
Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed
280
128
35929.6
... More
PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
Overall size 1sq.mm (Un-sheathed)
670
19
12843.9
... More
Overall size 1.5sq.mm (Un-sheathed)
80
24
1972
... More
Overall size 2.5sq.mm (Un-sheathed)
920
36
34021.6
... More
Overall size 4sq.mm (Un-sheathed)
1830
53
97740.3
... More
Overall size 6sq.mm (Un-sheathed)
180
73
13312.8
... More
Overall size 10sq.mm (Un-sheathed)
660
120
79543.2
... More
Overall size 16sq.mm (Un-sheathed)
650
187
121959.5
... More
Overall size 25sq.mm (Un-sheathed)
150
295
44373
... More
SUB DISTRIBUTION SYSTEM:
-
-
-
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
... More
TP&N Vertical Double Door Distribution Board 4 way each.
4
6766
27065.48
... More
TP&N Vertical Double Door Distribution Board 8 way each.
2
8518
17036.46
... More
Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-
-
-
-
... More
Cable End Box for TPN Vertical 4/8/12Way
6
1802
10813.98
... More
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Single Pole 6-32amp. (10kA, Curve-C)
96
190
18295.68
... More
MCB Four Pole 40amp. (10kA, Curve-C)
3
1531
4595.22
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
3
1750
5252.28
... More
MAIN DISTRIBUTION SYSTEM:
-
-
-
... More
MAIN VERTICAL DISTRIBUTION BOARD (EMERGENCY): TPN 8Way to feed MCB DB's (EMERGENCY LOAD) ON GROUND & FIRST FLOOR
-
-
-
... More
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-
-
-
-
... More
TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB upto 125amp)
1
9669
9669.18
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
... More
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
6626
6626.73
... More
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Triple Pole 40amp. (10kA, Curve-C)
4
1188
4755.92
... More
MCB Triple Pole 50, 63amp. (10kA, Curve-C)
4
1325
5302.04
... More
Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-
-
-
-
... More
PVC flexible pipe 40mm dia.
12
34
417.24
... More
Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe complete with as required:-
-
-
-
... More
PVC compression Socket gland 40mm dia.
12
32
391.92
... More
INDOOR LT PANELS:
-
-
-
... More
LT PANELS & MCCB's (MOULDED CASE CIRCUIT BREAKERS):
Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).
Fabrication: Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.
Painting: The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work .
-
-
-
... More
Busbars: The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:-
-
-
-
... More
MAIN LT PANEL:
-
-
-
... More
LT Panel enclosure having space for 1No. Incomer MCCB 200Amp. and 4Nos. outgoing MCCB's 40amp. to 100amp. according to the requirement at site (Approx. size 1825 x 1000 x 300mm) (DETAIL SEE IN PANEL INVENTORY)
1
74076
74076.27
... More
MCCB's (MOULDED CASE CIRCUIT BREAKER):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc
-
-
-
... More
MCCB Four Pole 40/63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
3
7744
23234.1
... More
MCCB Four Pole 200amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
13982
13982.05
... More
MINIATURE CIRCUIT BREAKERS:
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
3
1750
5252.28
... More
ON LOAD CHANGEOVER SWITCH (With Sheet Enclosure):
Supply and erection of On Load Change over Switch with advance neutral UNIT in sheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-
-
-
-
... More
On Load Change Over Switch Four Pole 100amp., 415volts (With Sheet Enclosure)
1
8321
8321.39
... More
EARTHING SYSTEM (INDOOR):
-
-
-
... More
COPPER EARTHING 8SWG :- Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long
1
11144
11144.34
... More
Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-
-
-
-
... More
Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)
20
343
6873
... More
COPPER EARTHING :-
(Upto 14 metre in Length):-Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-
-
-
-
... More
Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)
2
18663
37326.76
... More
COPPER EARTHING STRIP (As Additional Length):
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-
-
-
-
... More
Additional Length 20mm x 3mm thick Copper Tape .
50
517
25884.5
... More
INDOOR LT CABLES, CABLE TRAY, DWC PIPE , BRASS GLANDS & THIMBLES:
-
-
-
... More
XLPE INSULATED UN-ARMOURED CABLES (LOOSE):-
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-
-
-
-
... More
Overall size 6sq.mm (2Core) Un-armoured (Loose)
100
65
6584
... More
Overall size 16sq.mm (4 Core) Un-armoured (Loose)
200
131
26338
... More
Overall size 120sq.mm (3½ Core) Un-armoured (Loose)
200
586
117202
... More
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-
-
-
-
... More
Double walled corrugated (DWC) HDPE pipe 63/51 mm (outer/ inner dia.)
280
122
34218.8
... More
Double Walled Corrugated HDPE Pipe 90/76mm (Outer/ Inner dia.)
180
165
29772
... More
Double walled corrugated (DWC) HDPE pipe120/103.50mm (outer/ inner dia.)
5
257
1285.25
... More
Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections:-
-
-
-
... More
Brass Gland for Aluminium cable 2/3/4 Core size 6sq.mm
6
77
462.72
... More
Brass Gland for Aluminium cable 2/3/4 Core size 16sq.mm
6
130
781.26
... More
Brass Gland for Aluminium cable 3/3½/4 Core size 95-120sq.mm
4
251
1006.32
... More
Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-
-
-
-
... More
Aluminium thimble cable Core size 4 - 6sq.mm
20
13
274
... More
Aluminium thimble cable Core size 10 -16sq.mm
20
14
295
... More
Aluminium thimble cable Core size 70sq.mm
4
31
126.44
... More
Aluminium thimble cable Core size 120sq.mm
10
45
453
... More
Supply and erection of heavy duty Copper thimbles/lugs for cable end termination duly crimped including making necessary connections etc. completely:-
-
-
-
... More
Copper thimble cable Core size 4 - 6sq.mm
50
21
1090.5
... More
Copper thimble cable Core size 10 - 16sq.mm
50
26
1332.5
... More
SAFETY EQUIPMENTS:
-
-
-
... More
Providing and fixing of 4.5 Kg. Capacity FIRE EXTINGUISHER,CO2 type as per IS:15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect
2
7150
14300.38
... More
Providing and fixing of 6 Kg. Capacity FIRE EXTINGUISHER, ABC Powder type (stored pressure) asper IS:15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect
2
2940
5880.6
... More
Total D1:
-
-
-
... More
Providing Networking System along with allied accessories:
-
-
-
... More
Supply, Installation and Comissioning of 24 Port Non PoE, unmanaged switch Features 10/100/1000Mbps Ports 24, ENCLOSURE metal, Bandwidth 48 Gbps, Buffer Memory 512 kb, Jumbo Frames 9,216 bytes, Forwarding Rate (using 64-byte packets) 1,448,000 pps, Latency (using 64-byte packets) 4.7 µsec, MAC Address Table Size 8K, FORM FACTOR Desktop Wall-Mountable Rack-Mountable, Energy Efficient Ethernet (EEE) IEEE 802.3az yes, Auto Power Down yes, Short Cable Detection yes, Power Supply Internal (AC: 110-240V, 50-60Hz, 1.0A max), Power Consumption (Max and Standby) 11.1W / 8.47W, Heat Dissipation (Max and Standby) 37.96 BTU / 28.97, PORT LEDS Power, Link/Activity, PHYSICAL SPECIFICATIONS Width x Depth x Height 252 x 180 x 44 mm, Operating Temperature 0° to 40°C, Storage Temperature –20° to 70°C, Operating Humidity 90% maximum relative humidity, non-condensing, Storage Humidity 5% to 95% relative humidity, 802.3ab 1000BASE-T Gigabit Ethernet 802.3u 100BASE-TX Fast Ethernet 802.3i 10BASE-T Ethernet, 802.3x Flow Control 802.1p Priority QoS (all models) 802.1p Priority QoS and Honors DSCP tags (GS324 and GS348), 802.3 CSMA/CD 802.3az Energy Efficient Ethernet,. complete in all respect as per satisfaction of the Engineer in charge of the work.
1
13440
13440
... More
Supply, Installation and Comissioning of CAT 6 Cable should be Unshielded twisted pair cabling system, TIA / EIA 568-C.2 Category 6 Cabling system.Conductors should be 23 AWG solid bare copper.Netowork support should be ultrahigh speed data networks such as Gigabit Ethernet (1000 Base-T and 1000 Base-TX) and beyond.Cable Should be ETL/UL Certificates are mandatory.Frequency tested up to should be 600 MHz minimum.Impedance should be 100 Ohms + / - 15 ohms.Box Packing shoud be 305M.Should be 25-year systems warranty; Warranty to cover Bandwidth of the specified and installed cabling system, and the installation costs. Site certificate Should be issued by OEM.Should be RoHS compliant. complete in all respect as per satisfaction of the Engineer in charge of the work.
250
50
12500
... More
Supply, Installation and Comissioning of Patch Panel should be made of cold rolled steel.Should conform to TIA / EIA 568-C.2 Component Compliant.Should terminate 24 UTP CAT 6 (4 pair) Cables.Should confirm to EIA/TIA 568A wiring Pattern.Each port Should be features the spring-loaded shutter.Should be prevents incomplete mating Should be protects from dust and contaminants.Should be Front and rear port labelling as well as panel identification label.Should be Integral cable management shelf ensures bend radius compliance.Operating Life should be minimum 750 insertion cycles.Should be RoHS compliant.complete in all respect as per satisfaction of the Engineer in charge of the work.
1
8180
8180
... More
Supply, Installation and Comissioning of Patch Cord 1 Mtr Patch cord Should be 4 Pairs 24 AWG copper cables.The Outer Jacket should be Low Smoke Zero Halogen.24 AWG stranded bare copper.Operating temperature range should be -20°C to 60°C.Should minimum comply with proposed ANSI/TIA/EIA-568-C.2.Should be verified by ETL (ETL certificate to be enclosed with the Bid)UL listed (UL certificate to be provided along with the Bid)Should Have cross separator.Standard length should be available 0.5M to 10M.Should be RoHS compliant. complete in all respect as per satisfaction of the Engineer in charge of the work.
10
184
1840
... More
Supply, Installation and Comissioning of atch Cord 2 Mtr. Patch cord Should be 4 Pairs 24 AWG copper cables.The Outer Jacket should be Low Smoke Zero Halogen.24 AWG stranded bare copper.Operating temperature range should be -20°C to 60°C.Should minimum comply with proposed ANSI/TIA/EIA-568-C.2.Should be verified by ETL (ETL certificate to be enclosed with the Bid)UL listed (UL certificate to be provided along with the Bid)Should Have cross separator.Standard length should be available 0.5M to 10M.Should be RoHS compliant complete in all respect as per satisfaction of the Engineer in charge of the work.
24
209
5016
... More
Supply, Installation, Testing and Commissioning of Wall Mount 15U x 600 W x 600 D ,Front Glass Door (tinted,Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails with U-Marking , Welded Side Walls, Min Accessories : 1U Cable Manager (1), Hardware Packet (1 Pkt), 6 Socket 5 Amp. Power Distribution Unit (1 No), Roof Mounted Fan Unit / 90 CFM /230V AC.as per DIN 41494 Standards complete in all respect as per satisfaction of the Engineer in charge of the work.
1
11706
11706
... More
Supply, Installation, Testing & Commissioning of 1 KVA UPS with Input power factor - 0.99, Output power factor - 0.8, OVCD inbuilt , DC V 36v, Efficiency : Above 90% complete in all respects as approved and desired by the Engineer in-charge at site.
1
13597
13597
... More
RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
-
-
-
... More
Wiring Networking socket point RJ45 (one module)
10
461
4614.3
... More
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
-
-
-
... More
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
200
70
14160
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%