Public Works Department Tender

Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.

RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):

Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. universal Socket (shuttered) and 2Nos. 16/20Amp. switch with indicator (Modular accessories).

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (With fan box)

Wiring light point

Wiring 6Amp. wall socket point

Wiring 6Amp. Plug control comprising wall socket point

Wiring 16/20Amp. power plug control point

PVC INSULATED FR COPPER CONDUCTOR CABLES:

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 1.5sq.mm (Un-sheathed)

Overall size 2.5sq.mm (Un-sheathed)

Overall size 4sq.mm (Un-sheathed)

PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE:

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 1.5sq.mm (48/0.20mm), 2Core

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Heavy Gauge PVC Conduit Pipe 20mm dia. (Flushed)

Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)

COPPER EARTHING:

8 SWG COPPER EARTHING : Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-

Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long

Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-

Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C)

Supply and erection of LED Flood Light 80 watt, AC supply voltage 140-270 volts, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded luminium housing with control gear (IP 66 protection), THD10%, CRI inimum 70, High power LED (with wattage 1 to 5 watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No: AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.

Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.

Supply and erection of LED batten 40 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD 10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.

Supply and erection of LED Flood Light 50 watt, AC supply voltage 140-270 volts, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded luminium housing with control gear (IP 66 protection), THD10%, CRI inimum 70, High power LED (with wattage 1 to 5 watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No: AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.

Supply and erection of 3-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.

Supply and erection of Heavy duty Exhaust Fan 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.

CCTV PART

Supply and erection of 4MP Bullet/Dome Camera -with Fixed Lens Sensor with minimum of 0.33-inch 4 MP CMOS sensor. Resolution Minimum 2688 (H) × 1520 (V) for high-definition video quality Minimum Illumination0.006 lux@F1.6 or better Shutter Speed Auto/Manual, 1/3~1/100000s Lens 3.6mm Fixed Lens S/N Ratio 54dB Gain Control (AGC)Auto/Manual Video Compression H.265/H.264 Back Light Comp. BLC Image Rotation Support WDR range of minimum 120dBWDR Video Streaming Frame Rate Main stream: 2688 × 1520@ (1–20 fps)/2560 × 1440@ (1–25/30 fps) Sub stream: 704 × 576@ (1–25 fps)/704 × 480@ (1–30 fps) Resolution 4MP,3MP,2MP,1.3MP,720P, D1 & CIF can be set at any resolution as per requirement. Privacy Mask 4 Areas or Better ICR Mirror Function Support OSD (On Screen Display) support Camera title, Date & Time OSD Features Audio Compression G.711a/G.711Mu Audio Built-in Mic Protocol IPv4; IPv6; HTTP; TCP; UDP; ARP; RTP; RTCP; RTMP; SMTP; FTP; SFTP; DHCP; DNS; DNS; NTP; Multicast; ICMP; IGMP, ONVIF (Profile S/Profile G/Profile T); Video Content Analytics(Optional) Intrusion, tripwire Security Features Configuration encryption; Trusted execution; Digest; Security logs; WSSE; Account lockout; syslog; Video encryption ;802.1x;IP/MAC filtering; HTTPS; Trusted upgrade; Trusted boot; Generation and importing of X.509 certification Ethernet RJ-45 (10/100Base-T) Alarm Event No SD card; SD card full; SD card error; network disconnecton; illegal aces; motondetecton; video tampering; tripwire; intrusion; SMD; voltage detecton; security excepton User 20 IR Range up to 30mtr or above. Micro SD Micro SD card (support max. 256GB),SFTP Operating Temperature -30 °C to +60 °C (–22 °F to 140 °F) Power Source Dual Power Source 12 VDC & PoE (802.3af) complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of Supply of 16 CH. NVR 2 sata Ports -- Industrial-grade processor, Operating System: Embedded LINUX, User Interface GUI, Video Output : 1 HDMI with 4K Display Output,1 VGA, Bandwidth Incoming : 380Mbps or better, Support upto 8 LPR Camera’s, Resolution supported by NVR: 12MP; 8MP; 5MP; 4MP; 1080p,Hard Disk : 2 SATA III Ports, up to 16TB Each, Ethernet: 1 RJ-45 port (10/100/1000Mbps),Audio In/Out: 1/1, Alarm Input : 4 Ch, Alarm Output : 2 Ch., Trigger Events : Recording, PTZ, Tour, Alarm Out, Video Push, Email, FTP, Snapshot, Analytics By Camera: LPR, People Counting, Tripwire, Intrusion, Heatmap, Face Detection, Face Recognition, Recording Mode : Manual, Schedule (Regular, MD (Motion Detection), Alarm), Stop Search Mode : Time/Date, Alarm, MD, Interface Ports:2 USB ports(1 USB2.0, 1 USB3.0), 1 RS485, 1 RS232, Protocols : HTTP; HTTPS; TCP/IP; IPv4/IPv6; RTSP; UDP; SNMP; NTP; DHCP; DNS; SMTP; UPnP; IP Filter; PPPoE; FTP; DDNS; Alarm Server; IP Search; Multicast; ONVIF (Profile T; Profile S; Profile G), Power Supply : Single, 12 VDC, 4Amp ,Working Temp: -10 ~+55°C / 10~90%RH, Certifications : BIS/UL, CE, RoHS, FCC, ISO 9001:2015, 14001:2015, 27001:2013, 45001:2018, CMMI Level 3 & Level 5, ISO/IEC 27032:2012, GDPR complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of 42" LED/Monitor FULL HD (Commercial ) 42" LED Monitor, Full HD Full (Resolution: 1920 x 1080), 2 HDMI Port, Component Video Inputs, 1 Digital Audio Out with 14 watt for dual speaker and it should have both wall mount & table , Triluminos display for color adjust ratio complete in all respects as per satisfaction of the Engineer in-charge at site. (Smart LED)

Supply and erection of 4 port POE unmanaged switch 4 × gigabit PoE ports, and 1 × gigabit RJ 45 portPort type RJ45 port, full duplex, MDI/MDI-X adaptive Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x,IEEE 802.3ab, IEEE 802.3z Switching capacity 10 Gbps Packet forwarding rate 7.44 Mpps PoE port Ports1 to 4Max.power budget 78 W with AI for 4 port Dimensions (L × H × D) 40 mm × 30 mm ×90 mm or batter Operating temperature 0˚C to 40˚C (32˚F to 104˚F)Operating humidity5% to 95% (no condensation)Power supply 100-240 V AC 50/60 Hz Cerificate: ISO 9001:2015, ISO/IEC 27001:2013, ISO 14001:2015, CE, RoHs complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of 8 port POOE Switch gigabit , 120 W with SFP 2 Port 14.88 Mpps 20gbps Cerificate: ISO 9001:2015, ISO/IEC 27001:2013, ISO 14001:2015, CE, RoHs complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of CAT6 cable - Conductor Solid Bare Electrolytic Grade Copper Insulation Polyethylene (HDPE) Nominal Conductor Diameter 24 AWG Cross Filler HDPE Pairing 2 insulated conductors twisted together Outer Sheath FR PVC Operating Temperature -20 to +60°CApproximate OD 5.8 ± 0.1 mm Impedance 100±15% Ω Resistance Unbalance 5% Max Sequential Marking At Every Meter Packing 305 Mtrs Certifications CE, RoHS, FCC, ISO 9001:2015, 14001:2015, 27001:2013, 45001:2018, CMMI Level 3 & Level 5, ISO/IEC 27032:2012, GDPR complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of 4 TB Hard disk Surveillance complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of Supply of HDMI Cable (5 mtr) HDMI LEAD 5 MTR. Latest version HDTV cable supporting 3D Content Ethernet and audio RETURN CHANNEL GUARANTED 4 K 1140 P, 1080, 720 P, 480P, RESOLUTION , SUPPORTS REFRESH RATE UP TO 240 hz AND 48 BIT DEEP COLOUR, SUPPORT TRANSFER HDDolby 7.1 and DTS-HD master audio complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of Supply of RJ -45 Connector complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of PVC Junction Box for CCTV Camera Mounting 4x4, Waterproof Junction Box, Features: Durable, Dust-proof, Waterproof, Weatherproof, Dimension: 4 X 4 Inch, Designed for Outdoor & Indoor Use, Weatherproof and Waterproof. Well Protected from Rain and Water Splash Back, Making Them Perfect for Joining Wires Inside. Made of Durable Plastic Material. Easy to Install and Easy to Use.Installed quickly and easily to the ceiling or wall using the included screws complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of 2U Network Rack with PDU Lockable. complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of 6U Network Rack with PDU Lockable Wall Mount Rack Should have which has 2 vertical sections and 2 horizontal sections forms a steel front framework. HeightxWidthxDepth 475x575x600 mm. The bottom cover comprises of round cutouts of one 50mm and three 38mm diameter with cable entry points edge protected with rubber grommets. The top cover also has cut out for fan fitments. The whole cabinets is mounted on the wall with the support of 4 wall mounting brackets, 2 on left hand side and 2 on right hand side. PDU have DP for power cut and support to Full Load Current -6 to 32Amp for 6 sockets -1 nos. Rack should be ISI Certified. . complete in all respects as per satisfaction of the Engineer in-charge at site.

Supply and erection of Single Phase Input Voltage 230 V AC/ 50 Hz, 1650 VA Inverter, Output voltage: 230 Vac ± 2%, Frequency: 50 Hz ± 0,1% (1), with 200 AH Battery & Stand complete in all respects as per satisfaction of the Engineer in-charge at site.

Solar Power Plant

Supply Erection Testing & Commissioning of 15KW Roof top Solar Power Plant including warranty & Mtc of 5 Years AMC, GST & Peda charges. SPV modules for a total capacity as per specifications -1 Set- Compliance to IEC61215/IS14286 IEC61730, IEC61701, BIS Certificates and MNRE, GOI latest specifications/standards. SPV module mounting structure suitable accommodating SPV modules including foundation as per specifications on rooftop/ground. -1 Set- As per specification Inverter as per specifications - As per IEC 61683/IS 61683 and IEC 2(1,2,14,30) 60068- /Equivalent BIS Standards MNRE, GOI latest specifications/standards. LT-415V AC Distribution Panel -1 Set-Reputed Make DC Distribution Switchgear units as per specifications -1 Set- Compliant to IEC 60947, part I, II and III/ IS60947 part I, II. AC Distribution Switchgear units as per specifications -1 Set- Compliant to IEC 60947, part I, II and III/ IS60947 part I, II. DC Cable requirement as per design - Meters As required at site for full plant commissioning - Compliant to IEC 60227/IS 694, IEC 60502/IS1554. AC Cable requirement as per design -Upto meters 200- Compliant to IEC 60227/1S 694, IEC 60502/IS1554. Lightning arrester complete set as per specification -1 Set.

Earthing complete 3 numbers as per specification -1 Set. (3 Numbers Total)Fire Extinguisher -1 Set Engineering, electrical drawings and installations and O&M manuals -3 Sets. a. Data Logging system (for all solar plants) b. Data Logging system with Pyranometer Class 1 (for solar plants of capacity greater than 50 kW) -1 Set Any other equipment required to complete the installation Civil work and array structures: complete design. construction of array support structures on the roof top/ Ground. As per design submitted by supplier and approved by purchaser The plant will be installed as per MNRE GOI guideline & specifications. The detail of material of SPV system is attached at Annexure-1