Public Works Department Tender

Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compcting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications

Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No. 10.3) in foundation, first class brick work laid in cement sand mortar 1:5, 40mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12.50mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement 1mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including paint with coal tar (as specified in item No. 29.74) complete and to the requirement of the Engineer-In- Charge.

Excavation in open cutting or in streets and lanes for intramural sullage drains, extramural intercepting drains and outfall drains above top of drains cunnetes, storm water channels and other work contingent or incident thereto, to full dimensions and depth as shown on the drawings or as shall be required by Engineer-in-charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic, Providing and fixing and maintenance of caution boards, night signals, crossing over trenches for access to the houses, watching etc. and of removal of surplus spoil from the site of work including all lift and lead for depths to 2 metre below natural ground level upto 60 metres of length of lead in disposing surplus spoil.