Public Works Department Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 12,69,562Document Cost
₹ 30,000Tender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEPW_135902_1Tender No
Bid No 72 dated 04-03-2025 CW2 HVACTender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply, Installation, Testing and Commissioning of Water cooled screw type water chilling machine with VFD each having a capacity as given hereunder at chilled water inlet/outlet temperature of 12.22°C/6.7°C, Fouling Factor 0.0005 FPS and condenser water inlet/outlet temperature of 32.2°C/36.4°C Fouling Factor 0.001 FPS, suitable for operation on factory charged refrigerant R-134a for screw type machine each comprising of the following complete as per specifications and as required complete in all respect to the entire satisfaction of EIC.
-
-
-
... More
Screw type compressor semi hermetic complete with automatic capacity control safety switches, forced feed lubrication system The semi hermetic compressor should be mono/ twin type. Capacity control range of compressor shall be from min.25% to 100% Suitable capacity squirrel cage induction motor with class 'B'/'H' insulation suitable for operation on 415 +- 10% volts,50Hz, A.C. supply. 1 no. suitable capacity Variable frequency drive for the above compressor motor complete with ammeter with CTs, over load protection, under voltage protection, protection against phase reversal & independent single phase preventers etc complete as required.
Necessary drive arrangement. 1 set - Lubrication device consisting of automatic electric oil pump, oil cooler, head tank, oil strainer, and automatic pressure regulating valve, oil heater, oil heater thermal switch etc. as per specifications. 1 no. - Matching shell and tube water cooled condenser of M.S. shell and integrally finned copper tubes with Max. Pressure Drop of 4 mtrs with even pass
1 no. - matching shell & tube flooded type chiller for screw type units of MS shell and copper tubes with Max. Pressure Drop of 4 mtrs with even pass
1 Lot - Refrigerant piping fittings, valves and accessories to inter connect compressor, condenser, chiller and expansion valve.
-
-
-
... More
1 set - Microprocessor based control panel complete with accessories as per specifications. Lot - Refrigerant line accessories comprising of safety valves, angle valve, liquid line indications, liquid level control etc. Lot - Water flow switches at outlet of condenser & chiller, water drain, air purge valves, thermometers and pressure gauges wherever required. Lot - Suction line and chiller factory insulated with minimum 19mm thick polyvinyl nitrile rubber insulation complete as required. Lot- Frame work for mounting the above condenser, chiller compressor and motor with base plate complete with anti-vibration pads/springs. Lot- Initial/first charge of refrigerant gas & compressor oil. Lot- RCC / cement concrete foundation for the chilling unit. Screw type chilling machine described above, as per specifications and complete in all respects for the operating parameters as given under. The evaporator and condender shall have ASME Stamping The Chillers shall be AHRI Certified Chiller Should have to be 5 Star Rating to meet Super ECBC Complience. The IKW/TR Should not be more than 0.67 KW/TR. The NPLV Should not be more than 0.37 KW/TR.
-
-
-
... More
The price should include, loading/unloading and shipment till site Including Insurance Charges
,Unloading at site,RCC Foundation, placement of Chilling machine on the foundation, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned chiller.
Chiller 200 TR (Actual Capacity) (2W + 1S)
3
5165745
15497235
... More
Make Carrier/Trane/York/Daikin
-
-
-
... More
The Charges for above 200 TR x 1 no chiller got tested at AHRI certified test bed in OEM factory for 4 load points (100%, 75%, 50% & 25%)at the cost of the agency/ firm along with the Model & Serial No. of the Machine as per direction of EIC .The machine shall be accompanied with the 4 point test report duly certified by the OEM. No payment shall be released without the same .
-
-
-
... More
Hot water generator
-
-
-
... More
SITC of Electric Hot Water Generator of vertical construction equipped with sufficient number of flanges and electric immersion heaters. The pressure vessel shall be constructed as per ASME standards and insulated on all sides with 50 mm thick fiberglass (32 Kg/cum density) with 1.0 mm Aluminum cladding. The hot water generator shall be equipped with all automatic and safety controls such as high temperature water thermal cutout, Low water level
cut-off, PLC, HMI and other controls as per tender specifications.
The hot water generator shall be control by PLC based Step controller, HMI screen and BMS compatible having Ethernet/RS485 Port. All basic controls and terminals shall be located in an integral control cabinet factory wired and tested. The entire hot water generator and control cabinet shall be factory assembled on common base and tested and other controls as per manufacturers recommendations including inlet and outlet connections for water as per specifications complete with pressure release valve, low level cut-out. Autovent sight-glass, foundation for Hot water generator as per specifications complete as required. All basic controls and terminals shall be located in an integral control cabinet factory wired and tested. The generator shall be suitable for 415 (+)/(-) 10% volts, 50 cycle, 3 phase power supply. The entire generator shall be factory assembled and tested at 350 PSI pressure.
-
-
-
... More
The price should include loading/ unloading and shipment till site Including Insurance Charges ,Unloading at site,RCC Foundation, placement of HWG on the foundation, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned HWG.
-
-
-
... More
240.0 KW Actual Capacity Hot water generator (with Multiple Bank ) Water ‘in’ temperature- 45 Deg C and Water ‘out’ temperature- 50 Deg C (1 W + 1 S)
2
454229
908458
... More
Make : Rapid Cool/KEPL/Marshal
-
-
-
... More
Duct mounted Electric Air Heater Unit for Reheating
-
-
-
... More
Supply, installation, testing and commissioning of Flanged type duct mounted non‐flameproof Electric Air Heater Unit made out of 0.8mm thick GPSP sheet having 30mm flange and duly insulated with fiberglass wool to minimize heat loss. AISI 304 stainless steel Electric tubular heaters without fins having low watt density are provided with support brackets. The unit shall be equipped with safeties such as adjustable type primary thermostat, KLIXON® secondary thermostat
manual reset type and Air flow switch to prevent the heater from operating without airflow. It shall be provided with an inbuilt control panel having suitable rating incomer MCB, ON/Trip indication light, contactor, Thyristor module to operate 0‐100% as per demand, terminal for AHU/Blower interlock, grounding terminal, power and control wiring. The unit shall be BMS compatible. Three
Phase Wiring and The unit shall be CE certified.
-
-
-
... More
9 KW with Multiple bank(4.5KW + 4.5 KW)
4
66253
265012
... More
Make : Rapid Cool/KEPL/Marshal
-
-
-
... More
PUMP SETS
-
-
-
... More
Primary constant chilled water pump (2W+1S)
-
-
-
... More
Supply, installation, testing and commissioning of PN16 rated Vertical Inline Split Coupled single stage centrifugal pump each capable of delivering the specified flow rate comprising the following and complete as per specifications. Casing (Volute) - Cast Iron.
Impeller - Bronze - Statically and Dynamically Balanced
Casing Gasket - Confined Non Asbestos Fiber
Pump Shaft - SS 316.
Flush Line - Braided Stainless Steel
Mechanical Seal - Outside Balanced (the pump design shall meet the requirement of servicing / changing the mechanical seal without disturbing the pump shaft alignment) with external flushline. Motor Type - TEFC Squirrel Cage, Efficiency Class - Min IE3, Insulation - Class F, 415V ± 10% , 50Hz ± 5%, 3Ø AC Power Supply
-
-
-
... More
Chiller Water Pump Water Flow Rate: 480 USGPM
Head : 15 m WC
3
136338
409014
... More
Lot - Expended Polystyrene (TF quantity) insulation not less than 75mm thick duly cladded between aluminium sheets of 0.63mm thickness and properly clamped to pump in two semicircular sections as per specifications.
-
-
-
... More
Pump as above
-
-
-
... More
Note: The civil foundations reqd shall be made by the tenderer.
-
-
-
... More
Make: Xylem ,Grundfoss,Armstrong,Lubi
-
-
-
... More
Secondary Chilled water pump ( with VFD )
-
-
-
... More
Supply, installation, testing and commissioning of PN16 rated Vertical Inline Split Coupled single stage centrifugal pump each capable of delivering the specified flow rate comprising the following and complete as per specifications. Casing (Volute) - Ductile Iron.
Impeller - Bronze - Statically and Dynamically Balanced
Casing Gasket - Confined Non Asbestos Fiber
Pump Shaft - 316 SS .
Flush Line - Braided Stainless Steel
Mechanical Seal - Outside Balanced (the pump design shall meet the requirement of servicing / changing the mechanical seal without disturbing the pump shaft alignment) with external flushline. Motor Type - TEFC Squirrel Cage, Efficiency Class - Min.IE3, Insulation - Class F, 415V ± 10% , 50Hz ± 5%, 3Ø AC Power Supply VFD - Integrated motor mounted over Pump with IP- 55 protection. pump should operate through sensorless control or wireless DPT control. Pump Efficiency should be more than 75% (-2%)
Integrated fliter to meet EN61800-3 for RFI Control, Integrated DC link Reactor equivalent in performance to a 5% AC line reactor. All the VFD should display the dynamic head & flow rate of the pump using inputs from ultrasonic flow meter and digital pressure gauge or using sensorless alogorithms,( 1 flow meter and 2 pressure gauges to be supplied for each VFD driven pump). Pump manufacturer to supply Ultrasonic flow meter and digital pressure gauges along with the pumps supplied or can display individual flow and head of each pump using sensorless alogorithms. Pump Manager to assure performance manangment till DLP should be supplied for all VFD driven pump along with mode/Router for cloud connectivity without dependency on BMS.
-
-
-
... More
Chilled Water Pump ( 2W+1S ) with integrated VFD (For Variable primary system)
Water Flow Rate: 480 USGPM
Head : 36 m WC
3
777079
2331237
... More
Lot - Expended Polystyrene (TF quantity) insulation not less than 75mm thick duly cladded between aluminium sheets of 0.63mm thickness and properly clamped to pump in two semicircular sections as per specifications.
Pump as above (2 working + 1stand by)
Note: The civil foundations reqd shall be made by the tenderer.
Make: Xylem ,Grundfoss,Armstrong,Lubi
-
-
-
... More
Microprocessor Based Pump Logic Controller for Primary variable pump
-
-
-
... More
Separate ( not as apart of VFD )Microprocessor based Primary variable pump logic controller in IP 54 protection, to control following nos. Pumps. Suitable to operate on Sensorless & Should be Modbus RTU/ BACnet enabled for communicating with BMS & RS-485 serial communication with Pump VFD. The staging of pumps should be based on efficiency (not on capacity) to ensure minimum operating cost. Power Rating: 230 V/ 1 ph/ 50 Hz Display: Minimum 4.3" backlit LCD Hand-Off-Automatic (H-O-A) control Secure front cabinet door with lock and key UL Listed and CSA Approved Remote or local start/stop mode of operation
2-level (field and factory) password security Remote zone signals, zone faults, zone setpoint and active control zone Note : All above should be sourced from OEM as a single unit
-
-
-
... More
For Chilled water pumpset (2W + 1S)
1
558380
558380
... More
Make: Xylem ,Grundfoss,Armstrong,Lubi
-
-
-
... More
CONDENSOR WATER PUMPS
-
-
-
... More
Supply, installation, testing and commissioning of PN16 rated Vertical Inline Split Coupled single stage centrifugal pump each capable of delivering the specified flow rate comprising the following and complete as per specifications. Casing (Volute) - Ductile Iron.
Impeller - Bronze - Statically and Dynamically Balanced
Casing Gasket - Confined Non Asbestos Fiber
Pump Shaft - 316 SS .
Flush Line - Braided Stainless Steel
Mechanical Seal - Outside Balanced (the pump design shall meet the requirement of servicing / changing the mechanical seal without disturbing the pump shaft alignment) with external flushline. Motor Type - TEFC Squirrel Cage, Efficiency Class - Min.IE3, Insulation - Class F, 415V ± 10% , 50Hz ± 5%, 3Ø AC Power Supply VFD - Integrated motor mounted over Pump with IP- 55 protection. Pump Efficiency should be more than 75% (-2%)
Integrated fliter to meet EN61800-3 for RFI Control, Integrated DC link Reactor equivalent in performance to a 5% AC line reactor. All the VFD should display the dynamic head & flow rate of the pump using inputs from ultrasonic flow meter and digital pressure gauge or using sensorless alogorithms,( 1 flow meter and 2 pressure gauges to be supplied for each VFD driven pump). Pump manufacturer to supply Ultrasonic flow meter and digital pressure gauges along with the pumps supplied or can display individual flow and head of each pump using sensorless alogorithms. Pump Manager to assure performance manangment till DLP should be supplied for all VFD driven pump along with mode/Router for cloud connectivity without dependency on BMS.
-
-
-
... More
The price should include all clearance charges, unloading and shipment till site Including Insurance Charges ,Unloading at site,RCC Foundation, placement of PUMPs on the foundation, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned Pumps.
Variable Pumps must be provided with a cloud-based subscription service that enables Active Performance Management. It must proactively tracks and manages pump performance and provides early diagnostic messaging, web accessible trends and analysis along with automated reports helping end customer to make performance-based decisions and take immediate action to deliver the best possible HVAC pump performance.The cloud based subscription should deliver real-time alerts, such as:
-
-
-
... More
1) Alarms & warnings on excessive vibration,
2) Pump in hand,
3) Dead head,
4) Cavitation
5) BrokenCoupling
6) VFD and Motor Overheating The connectivity kit supplied by OEM/authorized representative should have ability to connect and provide real time data for upto 3 pumps in a single plant room.
-
-
-
... More
The system shall be complete in all respects and suitable for following ratings and duty.
Condenser Water Pump ( 2W+1S ) with 75 % (-2%)Efficiency of the pump Water Flow Rate: 800 USGPM
Head : 18 m WC
3
611520
1834560
... More
Make :Xylem,Grundfoss,Armstrong,Lubi
-
-
-
... More
Pump as above (2 working + 1stand by)
-
-
-
... More
Cooling Tower (CTI Certified)
-
-
-
... More
Supply, installation, testing and commissioning of CTI Approved standard Rectangular type FRP Induced Draught Counter flow cooling tower with Multi Cell. Motors shall be suitable for VFD's , IP65 and Premium efficiency of IE3 with neccessory accessories, FRP water basin, PVC fillings with integral louvers and drift eliminators, hot water distribution by gravity complete with statically and dynamically balanced axial flow Fans, Direct driven fans with TEFC induction motor and temperature sensor suitable for operation on 415 + 10% volts, 50 Hz. AC supply, suction screen, make up with float valve and quick fill arrangement, overflow and drain connections, suitable inspection ladder, access arrangement for cooling tower interior, MS supporting structure, anti-vibration mountings ,cement concrete foundation, steel/ mesonary supporting structure complete as per specifications as required. Design shall be as below ,IP 55 rated Locable Isolator Switch with cooling tower along with all Isolators for CT Complete in all respect .
-
-
-
... More
WBT : at 83º F
WB Approach : 2.77º C Maximum
Hot water IN : 97.5 ºF Hot water OUT : 90ºF Water Flow Rate : 800 USGPM
-
-
-
... More
The price should include loading/unloading and shipment till site Including Insurance Charges ,Unloading at site,RCC Foundation, placement of Cooling Tower on the foundation, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned Cooling Tower.
Heat Rejection Capacity : 3,000,000 BTU/hr (2W + 1S)
3
636175
1908525
... More
Make : Mihir,Paharpur,Bell, Flowtech
-
-
-
... More
AIR HANDLING UNITS
-
-
-
... More
Supply, installation testing and commissioning of Double skin air handlers, complete with thermal break profile ,the various sections, chilled water coils,centrifugal Forward/backward (Airofoil) curved blade fan and in Ceiling Mounted forward/Backward curved blade fan , direct driven/drive sets, squirel cage induction motor with minimum IE 3 efficiency, double layer canvas connection with 1/2 hr fire rating and, vibration isolators and with Thermal Break profile as described in the specifications & AHU schedule.
-
-
-
... More
Supply , installation testing and commissioning of AHUs as per the mentioned in AHU schedule.
-
-
-
... More
AHU FOR OT's AND ICU ((All AHU Motors /controls Should be VFD and BMS Compitable )
-
-
-
... More
Supplying, installing, testing and commissioning of factory built weather Proof with canopy for exposed to sunlight Floor Mounted double skin type air handling units with thermal break profile made of 48+-2 mm thick panels consisting of pre plasticized G.I casing made of thickness 0.8 mm outside layer and Aluminium sheet of thickness 0.8mm inside layer with polyurethene foam (PUF) CFC Free insulation of density 40+-2 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower DIDW/Suitable backward curved centrifugal fan of 125 mm WC static pressure for FM/CS AHU's, 8 row deep cooling, section with hydrophillic aluminium finned copper tubes (tube thickness not less than 0.5mm), Filter section with 50 mm thick flange type pre filter & MERV-13 fine filter on discharge or as per site requirement. , belt drive package with TEFC drive motor suitable for 415 ± 10% volts, 50 Hz, 3 phase, A.C supply,Mixing box with Aluminium Anodised Extruded dampers at fresh and return air cutouts, drain connections with drain valve, stainless steel drain pan, thermometers and pressure gauge at the inlet and outlet of cooling coil, necessary vibration isolation arrangement etc, Whole unit shall be ahri certified complete as per specifications of following capacity:
-
-
-
... More
Hardware for hanging of AHU with GI thread rods, check nuts/washers
PAN type Humidifier: Thyrister Based Pan Type Humidifier for Humidification of dry ambient along with its all connecting wires for FM/CS type AHUs
For FM AHU Variable Frequency drive for AHU motor to run it on min 25% rpm whenever area is non functional (Can be provided in AHU Panel also)
-
-
-
... More
CFM TYPE SP CC /TR
-
-
-
... More
4500 FM 125 8 RD/12
3
390388
1171164
... More
5000 FM 125 8 RD/12
1
400266
400266
... More
7200 FM 125 8 RD/20 along with HEPA filters
1
578715
578715
... More
2500 CS 110 6 RD/8 along with HEPA filters
2
232258
464516
... More
Make: Systemair,Edgtech,Flaktwood,Zeco
-
-
-
... More
Floor Mounted AHU's
-
-
-
... More
Supplying, installing, testing and commissioning of factory built weather Proof Floor mounted double skin type air handling units with thermal break profile made of 32+-2 mm thick panels consisting of pre plasticized G.I casing made of thickness 0.8 mm outside layer and sheet of thickness 0.8mm inside layer with polyurethene foam (PUF) CFC Free insulation of density 40+-2 kg/m3 factory injected between them by injection moulding machine, extra 25mm acoustic insulation of opencell nitrile rubber with 0.8mm AL perforated sheet, complete with blower section with blower DIDW or suitable backward curved centrifugal fan for FM AHU's, 6 row deep cooling coil, section with aluminium finned copper tubes (tube thickness not less than 0.5mm), Filter section with 50 mm thick box type pre filter & microvee filter on common frame. , belt drive package with TEFC drive motor(IE-3) suitable for 415 ± 10% volts, 50 Hz, 3 phase, A.C supply,Mixing box with Aluminium Anodised Extruded dampers at fresh and return air cutouts.,drain connections with drain valve, stainless steel drain pan, thermometers and pressure gauge at the inlet and outlet of cooling coil, necessary vibration isolation arrangement etc, Whole unit shall be ahri certified complete as per specifications of following capacity.
-
-
-
... More
CFM TYPE SP CC /TR
-
-
-
... More
5000 FM 65 6.0 RD /12.0
1
292650
292650
... More
6000 FM 65 6.0 RD /15.0
1
322470
322470
... More
7000 FM 65 6.0 RD /18.0
2
365648
731296
... More
Make: Systemair,Edgtech,Flaktwood,Zeco
-
-
-
... More
AHU/TFA for Isolation Room
-
-
-
... More
Supplying, installing, testing and commissioning of factory built Ceiling Suspended/Floor Mounted double skin type air handling units with thermal breakprofile for design of 100% fresh air made of min 25 mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8 mm outside layer and plane GI of 0.8mm inside layer with polyurethene foam (PUF) insulation of density 32 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower DIDW backward curved centrifugal fan, 8 row deep cooling with aluminium finned copper tubes (tube thickness not less than 0.5mm), Min MERV 7/10 Pre filter sections or as per norms and MERV 14 Fine filters, belt drive package with TEFC drive motor suitable for VFD & 415 ± 10% volts, 50 Hz, 3 phase, A.C supply, complete, drain connections with drain valve, stainless steel drain pan ,necessary vibration isolation arrangement etc, Whole unit shall be ahri certified ,complete as per specifications of following capacities :
-
-
-
... More
CFM TYPE SP CC /TR
-
-
-
... More
3000 CS 80 8 RD /25
2
209681
419362
... More
2000 CS 65 6 RD /10
1
137906
137906
... More
1200 CS 65 6 RD /6
1
117587
117587
... More
Make: Systemair,Edgtech,Flaktwood,Zeco
-
-
-
... More
Ceiling Suspended AHU
-
-
-
... More
Supplying, installing, testing and commissioning of factory built weather Proof Ceiling Suspended double skin type air handling units with thermal break profile made of 32 +-2 mm thick panels consisting of pre plasticized G.I casing made of thickness 0.6 mm outside layer and sheet of thickness 0.6mm inside layer with polyurethene foam (PUF) CFC Free insulation of density 40+-2 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower DIDW backward/Forward curved centrifugal fan for CS AHU's, 6 row deep cooling coil, section with aluminium finned copper tubes (tube thickness not less than 0.5mm), Filter section with 50 mm thick box type pre filter & microvee filter on common frame. , belt/Direct drive package with TEFC drive motor(IE-3) suitable for 415 ± 10% volts, 50 Hz, 3 phase, A.C supply,Mixing box with Aluminium Anodised Extruded dampers at fresh and return air cutouts.,drain connections with drain valve, stainless steel drain pan, thermometers and pressure gauge at the inlet and outlet of cooling coil, necessary vibration isolation arrangement etc, Whole unit shall be ahri certified complete as per specifications of following capacity:
-
-
-
... More
CFM TYPE SP CC /TR
-
-
-
... More
1600 CS 65 6.0 RD /4.0
3
128499
385497
... More
2000 CS 65 6.0 RD /4.0
1
132638
132638
... More
2000 CS 65 6.0 RD /5.0
3
132638
397914
... More
2200 CS 65 6.0 RD /6.0
1
149137
149137
... More
2400 CS 65 6.0 RD /6.0
4
154650
618600
... More
2400 CS 65 6.0 RD /8.0
3
154650
463950
... More
2500 CS 65 6.0 RD /6.0
1
156249
156249
... More
2500 CS 65 6.0 RD /8.0
5
156249
781245
... More
2600 CS 65 6.0 RD /8.0
2
172429
344858
... More
3200 CS 65 6.0 RD /8.0
1
202908
202908
... More
3200 CS 65 6.0 RD /10.0
1
202908
202908
... More
3500 CS 65 6.0 RD /10.0
3
215043
645129
... More
Make: Systemair,Edgtech,Flaktwood,Zeco
-
-
-
... More
AHU For Exhaust
-
-
-
... More
Supplying, installing, testing and commissioning of factory built Floor Mounted/Ceiling suspended double skin weather Proof type air handling units made of 25 mm thick panels consisting of pre plasticized G.I. casing of thickness 0.6 mm outside layer and plane GI of 0.6mm inside layer with polyurethene foam (PUF) insulation of density 32 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower DIDW backward/Forward curved centrifugal fan, belt drive package with TEFC drive motor suitable for VFD & 415 ± 10% volts, 50 Hz, 3 phase, A.C supply, complete with canvass connections ,necessary vibration isolation arrangement etc, complete as per specifications of following capacity
-
-
-
... More
625 CFM 45 mm Static with Micro Vee Filters at discharge and Pre Filters with MERV 8
1
80618
80618
... More
800 CFM 45 mm Static with Micro Vee Filters at discharge and Pre Filters with MERV 8
1
80618
80618
... More
1125 CFM 75 mm Static with Hepa Filter(H-13) of 99.77% to 3 Micron & Micro Vee Filters at discharge and Pre Filters with MERV 8 with Canopy
3
120409
361227
... More
1250 CFM 75 mm Static with Hepa Filter(H-13) of 99.77% to 3 Micron & Micro Vee Filters at discharge and Pre Filters with MERV 8 with Canopy
1
120409
120409
... More
1500 CFM 75 mm Static with Hepa Filter(H-13) of 99.77% to 3 Micron & Micro Vee Filters at discharge and Pre Filters with MERV 8
1
120409
120409
... More
1100 CFM 45 mm Static with Min MERV 7 Pre filter sections and MERV 14 Fine filters at discharge )
5
83628
418140
... More
1200 CFM 45 mm Static with Min MERV 7 Pre filter sections and MERV 14 Fine filters at discharge)
1
83628
83628
... More
Make: Systemair,Edgtech,Flaktwood,Zeco
-
-
-
... More
FAN COIL UNITS (Standard)
-
-
-
... More
Supply,Installation , testing and commissioning of fan coil units of specified capacities and air flow as per the specifications , complete with auxillary drain pan
Fan coil unit shall be supplied with approved make of factory fitted adequately sized insulated (with nitrile foam) , insulated brass ball valves-one with Y strainer, and the other without Y strainer complete with room thermostat for fan speed control , associated conduiting and wiring between the thermostat , valve .etc. Cost of fan coil unit shall be inclusive of approved make room thermostat (heating and cooling, with fan speed control), and associated MS conduiting and wiring etc.between the thermostat and two way valve , for a standard length of approximately 5-7 M per fan coil unit.
-
-
-
... More
Providing and fixing in position the following Fan Coil units complete with all valves and accessories as described above.
-
-
-
... More
2.0 TR nominal capacity ( 800 CFM)
2
30196
60392
... More
2.5 TR nominal capacity ( 1000 CFM)
15
34429
516435
... More
Make: Systemair,Edgtech,Flaktwood,Zeco
-
-
-
... More
SENSORS & FIELD DEVICES
-
-
-
... More
Supply, installation, testing & commissioning of the following Sensors complete as per tender specification.
-
-
-
... More
Duct type temperature & RH sensor with +-2% Accuracy
4
9197
36788
... More
Outside Temp & Humidity Sensor with radiation shield. Measuring Range: Temp:-30 to 50 Deg C & RH 0-100%, Accuracy: +/- 1 Degc +/- 3%
2
20489
40978
... More
Diaphragm type Differential pressure switches across the Micro V & HEPA filters for indicating filters status. Pressure differential – 10 mm – 125 mm. The switch shall be with connecting tube and metal bends for connections to the duct. The housing shall be IP 54 rated.
4
2183
8732
... More
Differential Pressure Transmitter for OT/ICU etc. Positive Pressure control ( 15 Pascal set point) complete with wall mounted fixtures / two side Tubing complete having measurement accuracy up to 0.05% or better
4
14605
58420
... More
Temperature and RH sensor and adjuster package.
-
-
-
... More
Supply,install-(grout),test and commission micro-processor based Room temperature, humidity sensor and remote adjuster package within a MS housing -wall ,suitable for mounting, and having a stainless steel cover plate.This package shall have a temperature and humidity display - red 2" high LED character for operation rooms , and other critical areas.
-
-
-
... More
Sensor, adjuster (Snap acting humidistat/Proportional thermostat- Microprocessor based) and displayer package, as described above.
4
22902
91608
... More
Air Differential pressure sensor and adjuster package
-
-
-
... More
Supply, installation , testing and commission room differential pressure sensor and remote adjuster package for varying the speed of the exhaust fan-(by providing command to the variable frequency drive of the exhaust fan),to maintain the desirable positive / negative the pressure relationship of the isolation/OT/ICU rooms with respect to the adjascent areas
-
-
-
... More
Air Differential pressure sensor and adjuster package as described above .
4
14605
58420
... More
Make :Honeywell , Siemens, Danfoss
-
-
-
... More
AOP cell with NANOX & PLASMAOX technology & Bi Polar Ionizer.
-
-
-
... More
SITC of Advanced Oxidation Pentplasma (AOP) cells comprising of UVC lamp 254 NM on NANO metallic compound target Alumninum matrix cell duly enclosed by a poly casing tube, with the capability to produce plasma Hydroxyl oxidizers along with anti microbial coating (EPA Approved). The unit shall have inbuilt multipin ion generator (+-10^6) pins along with ultrasonic radio frequency waves for pest repellancy. The UV-C lamp will be a low-pressure mercury type and of such intensity as to provide minimum performance as listed below. The UV-C lamp will produce only Germicidal UV (by definition this means 99.99% UV-C energy).The cell will have built in LED indication system stating the operation of the 3 technologies the UV lamp, ionizer and pest repellant. The power / control cabling between the Pentagon units and the power source / controls shall be included in the cost .The system shall be capable of reducing microbial bacteria, Covid 19 virus,virus and spores , VoC’, odors and particulates matter. The equipment shall conform to CE and ROHS. Standards certifications shall be submitted along with the technical submital. The Pentagon cells should be selected by considering a load factor calculation for each specific area where the equipment is to be installed. The wattage shall not be less than mentioned. The AOP/ Pentagon Cells Should be complete with Transformers, control cabling and Plug Top & necessary power cable.
-
-
-
... More
Duct Mounted AOP with UVC Lamp System for following Air Flow's
-
-
-
... More
Upto 1500 CFM
2
45805
91610
... More
1501to 6500 CFM
7
91609
641263
... More
6501 CFM to 15000 CFM
2
142503
285006
... More
MAKE : Ultrafresh, VS Enviropure, Ultrapure
-
-
-
... More
Pan Type humidifiers
-
-
-
... More
Supply, install, test and commission wall / floor mounted Pan Type Humidifier package of following capacities.
-
-
-
... More
4.5 KW
4
68183
272732
... More
3.0 KW
1
62054
62054
... More
Make : Rapid Cool/KEPL/Emerald
-
-
-
... More
EXPANSION TANK
-
-
-
... More
SITC of MS Expansion tank of size 1.0 m x 1.0 m x 1.0 m height made of 3 mm thick MS sheet complete with vent and drain connection, quick fill with float valve and control valve etc. as required. Litres duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete in all respect
-
-
-
... More
Min 1000 Ltr . Open Expansion Tank duly insulated and with all accessories.
1
21038
21038
... More
AIR SEPARATOR
-
-
-
... More
Supply,installation,testing and commissioning of Microbubble Air & Dirt Separator, with matching flanges, bolts, nuts & gasket, PN16 complete with flanged connection and as per the specifications as detailed earlier in the relevant section of specifications , and duly insulated with 50 mm thick TFF expanded polysterene and cladded with 26G aluminum sheet.
-
-
-
... More
200 mm Dia Air Separator , duly insulated.
1
112458
112458
... More
Make : Honeywell, Sant,Anergy
-
-
-
... More
CHILLED WATER PIPING
-
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.),cut to required length, and installed with welded joints (USE RECTIFIER AS SPECIFIED), duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.
-
-
-
... More
Note:-The Pipes of sizes 150 mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. (Insulation Make : Beardsell, Lloyed)
-
-
-
... More
25 MM Pipe DIA with 50 mm Thick Insulation
180
576
103680
... More
32 MM Pipe DIA with 50 mm Thick Insulation
126
733
92358
... More
40 MM Pipe DIA with 50 mm Thick Insulation
156
839
130884
... More
50 MM Pipe DIA with 50 mm Thick Insulation
108
1148
123984
... More
65 MM Pipe DIA with 50 mm Thick Insulation
78
1464
114192
... More
80 MM Pipe DIA with 50 mm Thick Insulation
48
1804
86592
... More
100 MM Pipe DIA with 50 mm Thick Insulation
90
2653
238770
... More
125 MM Pipe DIA with 50 mm Thick Insulation
78
3337
260286
... More
150 MM Pipe DIA with 75 mm Thick Insulation
108
3928
424224
... More
200 MM Pipe DIA with 75 mm Thick Insulation
138
5453
752514
... More
Pipe Make : Tata, Hisar Jindel
-
-
-
... More
SITC of Insulated VALVES/CONTROLS - PN-16 (Make: Advance, Kirloskar, Sant)
-
-
-
... More
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.
-
-
-
... More
BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet
& O - ring & PN 16 pressure rating as specified.
-
-
-
... More
200 MM DIA (Gear Box type)
2
18120
36240
... More
150 MM DIA
15
8920
133800
... More
125 MM DIA
4
7759
31036
... More
100 MM DIA
6
6040
36240
... More
80 MM DIA
4
4697
18788
... More
65 MM DIA
8
4369
34952
... More
50 MM DIA
24
4033
96792
... More
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.
-
-
-
... More
150 MM DIA
3
33923
101769
... More
125 MM DIA
3
25479
76437
... More
100 MM DIA
2
18544
37088
... More
Y - STRAINER (PN-16)of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.
-
-
-
... More
150 MM DIA
6
54095
324570
... More
125 MM DIA
1
47073
47073
... More
100 MM DIA
1
29552
29552
... More
80 MM DIA
1
17768
17768
... More
65 MM DIA
4
16139
64556
... More
50 MM DIA
12
10346
124152
... More
NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.
-
-
-
... More
150 MM DIA
6
14363
86178
... More
SITC Water Flow Switches (Brass body) . Make : Anegy, RC
8
1528
12224
... More
SITC Auto Air Vent Valve 3/4" . Make : Anergy, RC
20
2237
44740
... More
SITC Pressure Gauge 4" Dial (0 To 6 Kg/CM2). Make :Guru,Fiebig,Anergy
12
1283
15396
... More
SITC 6" StemType Thermometers (0 To +50OC) . Make : Guru,Fiebig
12
550
6600
... More
Supply, Installation, Testing & Commissioning of Insulated Two- way ball type pressure independent control valve with flanged end ISO7005-2, flow capacity as desired, Min.PN16, equal percentage flow characteristic, body GGG50 ductile iron with stainless steel ball. Non spring return rotary type modulating actuator, torque as required, close-off min pressure 700 kPa, power supply 24 V AC/DC, control signal 2-10 V DC, feedback signal 2-10 V DC, IP54.
-
-
-
... More
80 mm dia
1
90302
90302
... More
65 mm dia
5
69725
348625
... More
50 mm dia
14
29417
411838
... More
40 mm dia
6
27381
164286
... More
32 mm dia
20
24920
498400
... More
25 mm dia
15
23309
349635
... More
Make: Honeywell,Danfoss, Belimo
-
-
-
... More
Brass Ball Valves
-
-
-
... More
SITC of Brass Ball Valves of dia 40mm with Strainer
10
6097
60970
... More
SITC of Brass Ball Valves of dia 40mm without Strainer
10
2026
20260
... More
SITC of Brass Ball Valves of dia 32mm with Strainer
13
4061
52793
... More
SITC of Brass Ball Valves of dia 32mm without Strainer
13
1415
18395
... More
SITC of Brass Ball Valves of dia 25mm with Strainer
15
2636
39540
... More
SITC of Brass Ball Valves of dia 25mm without Strainer
15
865
12975
... More
Make: RC, Anergy,SIR
-
-
-
... More
CONDENSOR WATER PIPING
-
-
-
... More
Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.
-
-
-
... More
Note:-i)The Pipes of sizes 150 mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. ii) For under ground pipe : The pipe will be covered by applying 2-4mm thick Tarfelt sheet with required Adhesive ,Accessories etc
-
-
-
... More
250 MM DIA
72
5702
410544
... More
200 MM DIA
48
4544
218112
... More
150 MM DIA
18
2811
50598
... More
Make : Tata, Jindel Hisar
-
-
-
... More
VALVES/CONTROLS - PN-16 without Insulation , Make :Advance, SIR,Honeywell
-
-
-
... More
Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.
-
-
-
... More
BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet
& O - ring & PN 16 pressure rating as specified.
-
-
-
... More
250 MM DIA (Gear Box type)
6
26297
157782
... More
200 MM DIA (Gear Box type)
15
16473
247095
... More
150 MM DIA
6
8109
48654
... More
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.
-
-
-
... More
200 MM DIA
3
64281
192843
... More
150 MM DIA
6
30839
185034
... More
Y- STRAINERS (PN-16)
-
-
-
... More
Providing and fixing in position the following Insulated Y-Strainers
-
-
-
... More
200 mm dia
3
87354
262062
... More
POT- STRAINER(PN-16)
-
-
-
... More
Proiding and Fixing of Pot strainer with drain valve complete in all respect of following dia
-
-
-
... More
250 mm
1
147028
147028
... More
NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation as specified.
-
-
-
... More
200 MM DIA
3
24306
72918
... More
SITC Water Flow Switches (Brass body) complete with copper control wiring at chiller outlet of each machine
3
1528
4584
... More
AUTO AIR VENT
-
-
-
... More
Supply, installation ,testing and commissioning of Auto Air vents,at the specified locations in the chilled water piping , alongwith isolation ball valves, as per approved makes
-
-
-
... More
Auto air vent with isolating ball valves (15 mm dia)
15
2237
33555
... More
SITC Pressure Gauge 4" Dial (0 To 6 Kg/CM2)
6
1283
7698
... More
SITC 6" StemType Thermometers (0 To +50OC)
6
550
3300
... More
CONDENSATE DRAIN PIPE
-
-
-
... More
Providing and fixing and in position UPVC pipes (Min. Thickness 3.0mm) of various sizes for condensed water drainage from Indoor unit to nearest disposal point in toilet/ outside rain water harvesting system as approved by architect/consultant/Client for condensate drain duly insulated with minimum 6.0 mm 'O' Class Nirile rubber & duly secured with adhesive tape as per specification ,cut to required length and installed with all joints , including the necessary fittings. (For all the AHU/FCU units upto the main header in the shaft dor vertical risers
-
-
-
... More
50 mm dia
60
230
13800
... More
40 mm dia
90
142
12825
... More
32 mm dia
150
94
14100
... More
25 mm dia
150
60
9000
... More
Make : Diplast/Polypack/Astral/AKG
-
-
-
... More
AIR SIDE WORKS
-
-
-
... More
Factory fabricated Duct-GI duct
-
-
-
... More
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required and shall also confirm to the BIS specifications.The duct shall be fabricated at site for to make Collors/bends/plenums/suit pieces Only
-
-
-
... More
1.25 mm (18 gauge) GSS
10
1665
16650
... More
1.0mm (20 gauge) GSS
30
1369
41070
... More
0.8mm (22 gauge) GSS
400
1145
458000
... More
0.63mm (24 gauge) GSS
800
977
781600
... More
(Make: Eco Duct,Zeco,Ductofab (Sheet Make: Tata, Sail,Jindal)
-
-
-
... More
Factory Fabricated Duct - AL duct
-
-
-
... More
Supply,Fabrication , Installation and testing of Aluminium sheet metal ducts in accordance with the approved shop floor drawings and specifications , and shall also confirm to the BIS specifications. The hardware shall be chrome plated or of stainless steel.All lateral and transverse joints shall be sealed with silicon based mastic sealant.
-
-
-
... More
Aluminum Sheet thickness - 22 Gauge
230
1321
303830
... More
Aluminum Sheet thickness - 20 Gauge
100
1585
158500
... More
(Make: Eco Duct,Zeco,Ductofab (Sheet Make: Tata, Sail,Jindal)
-
-
-
... More
Grilles/Diffusers
-
-
-
... More
Providing and fixing of Extruded aluminium supply and return air grilles/diffusers/ louvres with dampers, supply air plenum etc. duly powder coated as per specifications and drawings.
-
-
-
... More
Supplying & fixing of powder coated extruded aluminium Supply/Return Air Grills as per specifications
45
6050
272250
... More
Supplying, fixing testing commissioning of Return/Supply air diffusers(Square/Round) of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
30
15526
465780
... More
Supplying, fixing testing commissioning of aluminium Collor dampers as per specifications
30
5868
176040
... More
Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.
-
-
-
... More
Fire damper
12
8308
99696
... More
Actuator
15
11580
173700
... More
GI Volume control dampers for ducts
5
6699
33495
... More
AI Volume control dampers for ducts
5
12722
63610
... More
Make:SystemAir/Caryaire/Ravistar/Pinaire/Sant
-
-
-
... More
Fresh Air/Exhaust Air Louvers
-
-
-
... More
Supply, Installation, Testing and Commissioning of extruded aluminium louvres with frame bird screeen 50 mm pre-filter with frame, mounting arrangement etc. as per specifications and drawings.
-
-
-
... More
Fresh Air/Exhaust Louvers
5
14903
74515
... More
Make:SystemAir/Caryaire/Ravistar/Pinaire/Sant
-
-
-
... More
HEPA Filters & OT Plenum for Laminar Flow
-
-
-
... More
SITC of Aluminium white epoxy powder coated Factory Fabricated O.T. PLENUM (Aprox.size 8'x6') & HEPA Filters Having efficiency 99.97%down to 3 Micron ,I.P.D 15 mm HG & F.P.D. = 50 mm HG, The Hight of OT Plenum should not be more than 400 mm
4
287981
1151924
... More
Make :Thermadyne, Klenzaid,AAF
-
-
-
... More
MECHANICAL INSULATION
-
-
-
... More
DUCT LINE ACOUSTIC TREATMENT
-
-
-
... More
Supply, Installation, Testing and Commissioning of Acoustic lining inside ducts/plenum using open cell nitrile rubber foam having microban anti-microbial/ anti fungal product protection and of 160-180 kg / m³ density as per ASTM D3575, class 1 ratingn As per BS476,PART-7, cut to required sizes and to be stuck to the inside of duct surfaces with adhesive as approved by the manufacturer. (Rubber based solvent). as per specifications
-
-
-
... More
15mm thick sound board for Floor Mounted AHU's
40
1227
49080
... More
10mm thick sound board for Ceiling Suspended AHU's
130
818
106340
... More
Make :K Flex,Armacell,Aerolam
-
-
-
... More
DUCT LINE THERMAL INSULATION (Inside Conditions)
-
-
-
... More
SITC of Physically / Chemically crosslinked polyethylene foam, with factory reinforced alupet foil facing, ANTI MICROBIAL/ANTI FUNGAL,HFC & CFC free , Negligible VOC level with Class O fire properties,with very low fire propagation of 5.5 and passing E-84 at 25/50, as per technical specification, the density of the foam should be not less than 25-30kg/m3 and the maximum thermal conductivity K should be 0.032W/mK@ 23 Deg C , the permeability resistance factor u shouldn't be less than 14000. The product shall have temperature range of –20oC to 115oC
-
-
-
... More
13 mm thick
1250
637
796250
... More
DUCT LINE THERMAL INSULATION (Outside Conditions exposed to sun)
-
-
-
... More
Physically / Chemically crosslinked polyethylene foam, with factory laminated heavy duty and ultra tough multi-layered composite aluminium foil facing, with puncture resistance of 400N and Class O fire properties as per BS 476 Part BS 476 Part 6 & 7 and as per the tender technical specification and density of the foam should be not less than 25 - 30 kg/m3 and maximum thermal thermal conductivity K should be 0.032W/mK@ 23 Deg C & the permeability resistance factor u shouldn't be less than 97000.
-
-
-
... More
25mm thick
160
1173
187680
... More
Make :K Flex,Armacell,Aerolam
-
-
-
... More
AHU Room Accoustic Lining
-
-
-
... More
SITC of acoustic insulation of the AHU rooms with 50 mm thick FG Board of density 48 kg/cum covered with FG cloth & 24 G perforated Al sheet. These shall be fitted in a GI channel section grid of size 900x900. All work shall be done as per standard engineering pratice & workmanship. The surface shall be treated with anti termite treatment before laying the above items.
160
792
126720
... More
Make :UP Twiga , Owens Corning
-
-
-
... More
ASSOCIATED ELECTRICAL WORKS
-
-
-
... More
Control Console
-
-
-
... More
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning floor mounted desk type Remote Control with mimic diagram & panels fabricated out of 14 guage for load bearing and 16 gauge for non load bearing CRCA sheet steel comprising of start/stop push buttons, status indication i.e. on/off/trip for 03 nos. Water-cooled screw chillers, 15 nos. Chilled/Hot water Pumps/CT/Chillers sets,45 nos. AHU's/scrubber , 2 No. Hot Water Generator and 20 No. Spares with internal control wiring and accesorries.
1
305462
305462
... More
Panel Make : Adlec/Siemens/Tricolite/Unitech Power System/Vrindavan Electricals
-
-
-
... More
Main Electrical Panel (CPRI Approved)
-
-
-
... More
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning weather proof of following LT panels fabricated out of 14 guage for load bearing and 16 gauge for non load bearing CRCA sheet steel in cubical formationwith reinforecment of suitable size angle iron and channel T iron flats. All steel material used in the construction of panels shall be powder coated. A solid busbar shall be provided at the bottom of the panel with two connecting eyes for termination. The boards shall be suitable for 415 volts, 50 Hz, 3 phase , 4 wire supply system. All the hardware used in the fabrication of the panel shall be galvanized with zinc passivation. The panel shall be compartmentalized to accommodate one feeder in each compartment. A vertcal cable alley of suitable width shall be provided to serve on or two vertical feeder sections. Also the opening between the busbar chamber and the feeder section shall be shrouded with bakelite / hylam sheet with min.3 mm thickness.OEM should CPRI approved at least 70K
-
-
-
... More
The panel drawing shall be approved before taking up the fabrication and Sall have compitable BMS for future requirment.
In All panels Each starter should have remote control compatibilty and interlocking facilities including auto manual switch, NO/NC contacts for control and must have auto manual operation suitable to take signal from fire alarm panel for automatic operation of fan in case of fire. All smoke /vent. fan panel the starters shall have suitable facility to operate with fire sensing control modules.
-
-
-
... More
Plant Room Panel 1 no.Min.1250 amp EDO ACB 65 KA with Microprocessor release alonwith protection of S/c, E/F, etc
Multi Function Digital Meter class 1.0 Accuracy Schnieder series 64XX or equivalent of the same model in Elmeasure/ HPL/Reputed with CTs of the desired rating as per the load
Phase indicating lights RYB with control fuses.
Breaker ON/OFF/TRIP indicating lights. Bus Bars 1500 amp TPN Aluminum Bus Bar with heat shrinkable insulation colored sleeves.
-
-
-
... More
Outgoings 3nos. 320-400 amp, MCCB, 50 KA with Rotary operating handles for Chiller 3 nos MPCB for upto 15 KW or as per rating of the Primary Chilled water pump and the Star Delta starter with Contactors as per the Cordination chart with O/L Relay, S/D Timer and SPP (2 working + 1 Standby)with Digital Ampere Meter Class 1.0 with CT of suitable rating
3 nos. MCCB for Upto 25 KW or as per the rating of the Secondary Chilled water pumps by the Chiller Manufacturer (2Working + 1Standby) for primary Chilled water Pumps without starter as VFD to be available on Chilled water pump side with Digital Ampere Meter Class 1.0 with CT of suitable rating
3 nos MPCB for upto 20 KW or as per rating of the Condenser water pump and the Star Delta starter with Contactors as per the Cordination chart with O/L Relay, S/D Timer and SPP (2 working + 1 Standby)with Digital Ampere Meter Class 1.0 with CT of suitable rating
6 nos MPCB for 7.5 KW or as per the manufactrer specifications for the cooling towers with the DOL starter with Contactor as per the Cordination chart with O/L Relay and SPP with Digital Ampere Meter Class 1.0 with CT of suitable rating
2 nos. 320-400 amp, MCCB, 50 KA with Rotary operating handles for HWG (1W plus 1Standby) with Digital Ampere Meter Class 1.0 with CT of suitable rating
3 nos DP MCB 6Amps 10 KA for supplying to various control equipment
-
-
-
... More
2 Nos, spare space for MCCB upto 200 Amps
1
1235422
1235422
... More
Hardware ( PVC Cahnnels/MCB Channels/Fibre- Glass Gaskets/Sleevs/nuts/bolt/washers/cooling fans etc Including complete wiring,thimbles etc.
Unloading at site, placement of Panel on the foundation, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned Panel.
Unloading at site, placement of Panel on the foundation, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned Panel.
The panel drawing shall be approved before taking up the fabrication from EIC
-
-
-
... More
Panel Make : Adlec/Siemens/Tricolite/Unitech Power System/Vrindavan Electricals
-
-
-
... More
HVAC AHU Panel with Exhaust AHU along with VFD
-
-
-
... More
Incoming
7
162913
1140391
... More
1 no. 63 amp MCCB TP 25 KA with Rotary Mechanism and spreader links Phase indicating lights with control fuses. Breaker ON/OFF/TRIP indicating lights. Bus Bars 100 amp TPN Aluminum Bus Bar with heat shrinkable insulation colored sleeves Multi function meter Digital with suitable CT type class 1.0
-
-
-
... More
Outgoings
-
-
-
... More
2 nos. MCB TPN 6-32 Amps to supply to VFDs (AHU & Exhaust VFD) Rating of the TPN as per the VFD maximum load with Digital Ampere Meter Class 1.0 with CT of suitable rating
2 nos VFD of suiatble HP rating as per the AHU and Exhaust AHU with console or related interface to be working with the controller provided by the AC company, herein referred to as the Controller with Digital Ampere Meter Class 1.0 with CT of suitable rating 1 nos DP MCB 16 Amps, 2 nos. 6 A, MCB for UVC Lamp (if required), Transformer or powersupply with MCB DP 6 Amps
-
-
-
... More
Panel Make : Adlec/Siemens/Tricolite/Unitech Power System/Vrindavan Electricals
-
-
-
... More
Sub Panel for AHU Motors up to 5.5 KW
-
-
-
... More
SITC of Wall mounted sub panel boards for AHUs, Blower with switch, starters, lamps inter connections, current operated single phase preventer, A/M switch etc. as per specifications and drawings and as required.
-
-
-
... More
1 No. incoming upto 32Amps 4 pole TP+NL MCB with Digital Mutli function Meter Class 1.0 with CT of suitable rating, RYB Indicators, 2 Nos. Push Buttons On/Off, 1No. single phase preventor, 1 nos. DOL starter with Power contactor and MPCB as incomer of the starter with SPP with Digital Ampere Meter Class 1.0 with CT of suitable rating, 1 No MCB DP , 2 nos. 6 A or suitable, MCB for UVC (if required)
35
23758
831530
... More
Panel Make : Adlec/Siemens/Tricolite/Unitech Power System/Vrindavan Electricals
-
-
-
... More
Sub Panel for AHU above 5.5 KW
-
-
-
... More
SITC of Wall mounted sub panel boards for AHUs, Blower with switch, starters, lamps inter connections, current operated single phase preventer, A/M switch etc. as per specifications and drawings and as required.
1 Nos. 32-80 Amps TP+NL MCCB 25 KA ICU=ICS=100% with Terminals, ROM and necessary accessories with Mutlifunction Meter Class 1.0 with CT of suitable rating
-
-
-
... More
RYB Indicators, 2 Nos. Push Buttons On/Off, 1No. single phase preventor, 1 nos. Star Delta starter with Power contactor and MPCB as incomer of the starterwith SPP with Digital Ampere Meter Class 1.0 with CT of suitable rating, 1 No MCB DP
-
-
-
... More
2 nos. 6 A or suitable, MCB for UVC lamp (if required)
3
35128
105384
... More
Panel Make : Adlec/Siemens/Tricolite/Unitech Power System/Vrindavan Electricals
-
-
-
... More
CABLING (POWER
-
-
-
... More
Power Cabling and Earthing
-
-
-
... More
Supply, installation, testing & commisioning of Aluminum conductor cables PVC sheathed, armoured cables of 1.1 KV grade with termination glands and GI earthing, identification tags, clamps and saddles etc.
-
-
-
... More
3.5Cx240 Sqmm
60
2230
133800
... More
3.5Cx185 Sqmm
60
1737
104220
... More
4.0Cx35 Sqmm
90
476
42840
... More
4.0Cx16 Sqmm
90
295
26550
... More
4.0Cx10 Sqmm
30
247
7410
... More
4.0Cx 06 Sqmm
160
205
32800
... More
2Cx04 Sqmm (Cu Conductor)
200
262
52400
... More
Make : Havell's,Eko,Finolex,Polycab
-
-
-
... More
Control Cabling
-
-
-
... More
Supply, installation, testing & commisioning of Copper conductor , PVC insulated, PVC sheathed armoured/Unarmoured cable of 1.1 KV grade (Which is Interconnecting wiring for the fire alarm system with the AHU and the smoke dampers and AHU to Control Consol Panel
-
-
-
... More
8C x 1.5 Sqmm Armoured
2000
425
850000
... More
4C x 04 Sqmm Armoured
150
442
66300
... More
4C x 2.5 Sqmm Un-armoured
450
274
123300
... More
4C x 1.5 Sqmm Un-armoured
160
168
26880
... More
2C x 1.5 Sqmm Un-armoured
50
104
5200
... More
Make : Havell's,Eko,Finolex,Polycab
-
-
-
... More
Supplying and installing following size of perforated G.I. cable trays, G.I. bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with suitable suspenders including G.I. bolts & nuts, painting of suspenders etc. complete as required.
-
-
-
... More
50 mm x 100 mm x 50mm x 1.6mm. Thickness
50
400
20000
... More
50 mm x 150 mm x 50mm x 1.6mm. Thickness
120
495
59400
... More
50 mm x 225 mm x 50mm x 1.6mm. Thickness
50
639
31950
... More
50 mm x 300 mm x 50mm x 1.6mm. Thickness
80
782
62560
... More
50 mm x 450 mm x 50mm x 2.0mm. Thickness
100
1323
132300
... More
Under Deck Insulation
-
-
-
... More
Providing & Fixing Underdeck Insulation with 50 mm thick TF Quality EPS of Density 20 Kg/M3 fixed to slab with good quality Black CPRX Compound. 28Gwirenet shall be tightened arround insulation so as avoid any kind of sagging, Ends of net shall be overlapping at least 25mm. Overlaps shall be screwed with galvanized screws to avoid rusting : Make: Beardsell,Llyod
200
447
89400
... More
Staircase & Lift Pressurisation Fans
-
-
-
... More
Supply, Installation testing & Commissioning of AXIAL FLOW FAN complete with totally enclosed fan cooled motor direct driven, and fan shaft, motor mount as per the specifications. Fan motor shall be Class-F, suitable for 415 + 10% volts, 50 cycles, 3 phase power supply. The Axial fans shall be supplied with power pane. Fan capacity shall be as follows:
-
-
-
... More
Casing shall be GI/hot dip galvanized to protect against corrosion. Length of the casing shall be greater than the length of fan & motor assembly.
IMPELLER of axial fans shall be constructed from die cast aluminum. Profiles of impeller blade should be of aerofoil type to have high efficiency and low noise levels. Impeller must be statically and dynamically balanced as per ISO 1940 grade 6.3. Fan shall be selected based on best efficiency points with fan pitch angle selected in the middle range out of available whole range of fan pitch angle to allow possible fan speed adjustment on site.
-
-
-
... More
Staircase Pressurisation Axial Fan 6500 cfm x 25mm sp
3
63618
190854
... More
Liftwell Pressurisation Axial Fan 5700cfm x 20mm sp
3
55474
166422
... More
Make :Flaktwood/Systemaire/LTI
-
-
-
... More
SITC Starter panel for above fans including Star delta starter or suitable panel with on off push button, on/off/trip indicators, manual reset overload relays, armoured cabling with proper tray supports from starter panel to fan motor Starter panel should be provided with auto manual toggle switch & facility to operate on remote signal. Necessary earthing, smoke & fire detector providing signal to starter panel, related control cabling shall be part of starter panel as approved by Department/ consultants/ clients complete in all respect
6
29446
176676
... More
Panel Make : Adlec/Siemens/Tricolite/Unitech Power System/Vrindavan Electricals
-
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
31662
63324
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in
recess for connections etc. as required
50
1722
86100
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in
recess for connections etc. as required.
80
211
16880
... More
Providing and fixing 8 SWG G.I. Wire on surface or in
recess for connections etc. as required.
800
106
84800
... More
Total Sub Work-1:-
-
-
-
... More
AMC FOR 05 YEARS AFTER DEFECT LIABILITY PERIOD OF 24 MONTHS (02 YEARS) FROM THE DATE OF HANDING OVER THE SYSTEM.
-
-
-
... More
Comprhensive Maintenance charges for HVAC including (routine and preventive maintenance with parts including consumables such as gas, oil, filters) and break down maintenance of high & low side of the air conditioning plant comprising of all the machinery during FIVE years after expiry of two year defect liablity period
-
-
-
... More
I st year (1% of Capital cost) (i.e. amount of Final Bill)
1
565806
565806
... More
2nd year (2% of Capital cost) (i.e. amount of Final Bill)
1
1131613
1131613
... More
3rd year (3% of Capital cost) (i.e. amount of Final Bill)
1
1697419
1697419
... More
4th year(3.50% of Capital cost) (i.e. amount of Final Bill)
1
1980322
1980322
... More
5th year (3.50% of Capital cost) (i.e. amount of Final Bill)
1
1980322
1980322
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%