Panjab University Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Panjab University - PU Tender
Building Construction
Eprocure
Opening Date12 Dec 2024
Closing Date7 Jan 2025
Tender Amount₹ 14,55,78,000
Costs
EMD
₹ 29,11,560Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PU_83813_1Tender No
426/STTender Authority
Panjab University ViewPurchaser Address
-Website
http://http://puchd.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (DSR ref. 2.27)
61.31
1888
115753.28
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR ref. 4.1.10)
217.43
5471
1189559.53
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) (DSR ref. 4.10)
57.9
365
21133.5
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR ref. 5.1.2)
94.99
8753
831447.47
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR ref. 5.2.2)
94.97
10052
954638.44
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete (DSR ref. 5.9.1)
52.74
303
15980.22
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (DSR ref. 5.9.2)
285.18
594
169396.92
... More
Suspended floors, roofs, landings, balconies and access platform (DSR ref. 5.9.3)
272.5
669
182302.5
... More
Lintels, beams, plinth beams, girders, bressumers, and cantilevers. (DSR ref. 5.9.5)
171.11
549
93938.29
... More
Columns, Pillars, Piers, Abutments, Posts and Struts (DSR ref. 5.9.6)
81
703
56943
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars (DSR ref. 5.22.6)
6500
100
650000
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars (DSR ref. 5.22.A.6)
5775
100
577500
... More
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainlesssteel cramps and pins etc. shall be paid for separately).
-
-
-
... More
Red sand stone - 30mm thick gang saw cut stone (DSR ref. 8.20.1)
2450
2578
6316100
... More
Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners
-
-
-
... More
on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). (DSR ref. 8.21)
35000
251
8785000
... More
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-incharge. (DSR ref. 8.22)
24500
353
8648500
... More
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.
-
-
-
... More
Red sand stone (DSR ref. 11.28.1)
450
1115
501750
... More
Painting top of roofs with bitumen of approved quality @ 17kg per 10 Sqm impregnated with a coat of coarse sand at 60 cudm per 10 Sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete :
-
-
-
... More
With residual type petroleum bitumen of grade VG - 10 (DSR ref. 12.15.1)
1400
242
338800
... More
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per Cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat :
-
-
-
... More
With common burnt clay F.P.S.(non modular) brick tile of class designation 10 (DSR ref. 12.16.1)
1400
1142
1598800
... More
Extra for every additional 1 cm thickness of mud phaska (DSR ref. 12.18)
1400
30
42000
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
... More
In 75 x 75 mm deep chase (DSR ref. 12.21.1)
300
229
68700
... More
Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR ref. 12.22)
15
273
4095
... More
12 mm cement plaster of mix.
-
-
-
... More
1: 6 (1 cement : 6 fine sand) (DSR ref. 13.1.2)
300.6
250
75150
... More
15mm cement plaster on the rough side of single or half brick wall of mix.
-
-
-
... More
1: 6 (1 cement : 6 fine sand) (DSR ref. 13.2.2)
1200
288
345600
... More
6mm cement plaster of mix
-
-
-
... More
1: 3(1 cement : 3 fine sand) (DSR ref. 13.16.1)
183.91
224
41195.84
... More
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):
-
-
-
... More
Flush / Ruled/ Struck or weathered pointing (DSR ref. 13.31.1)
1400
180
252000
... More
White washing with lime to give an even shade :
-
-
-
... More
New work (three or more coats) (DSR ref. 13.37.1)
4565.31
31
141524.58
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (DSR ref. 13.47.1)
3419.74
136
465084.37
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(DSR ref. 13.80)
16035.64
116
1860134.12
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
... More
Two coats (DSR ref. 13.82.2)
12615.9
113
1425596.81
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion
-
-
-
... More
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum
anodic coating of grade AC 15) (DSR ref. 21.1.1.1)
1800
517
930600
... More
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR ref. 21.1.1.3)
1000
569
569000
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
... More
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR ref. 21.1.2.3)
1500.28
635
952675.26
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
-
-
-
... More
Pre-laminated particle board with decorative lamination on both sides (DSR ref. 21.2.2)
50.59
1000
50592
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
... More
With stainless steel cover plate minimum 1.25 mm thickness (DSR ref. 21.4.1)
6
2638
15828
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works upto the height of 60' complete in all respect to the engineer in charge.( including two coat of enamel paint) (NS)
14150
153
2164950
... More
Extra for providing and mixing water proofing material in cement concrete work/ or any cement mortar work in doses by weight of cement as per manufacturer's specification.(NS)
500
73
36500
... More
Providing & laying 30 mm thick fine dressed, machine rubbed sand stone for lining on walls, pillers or any surface clading, skirting, risers of steps in any pattern as specified on 12.5mm thick cement and coarse sand mortar in 1:3 with cement slurry and admixture of pigment to match the shade the shade of stone including pointing and all leads and lifts. Complete in all respects to the entire satisfaction of engineer incharge. (NS)
140.3
1428
200348.4
... More
20 mm thick Smooth plaster of mix 1:4 (1 cement :4 fine sand) with chicken wire mesh on exterior surface of the building upto the height of 10 meter. (including the adding of Dr. fixit chemical 101 LW+ , 200 ml in one cement bag). Complete in all respects to the entire satisfaction of engineer incharge. (NS)
5063.39
497
2516504.83
... More
Providing and applying Perlina textured paint of Spectrum/ACRO make on exterior surface of the building upto the height of 10 meter, prepare the surface with i) plaster surface cleaned with the sand paper ii) applying primer of spectrum make or its equivalent iii) applying birla acrylic putty iv) applying perlina texture paint v) applying top protective coat (clear liquid) over texture paint.(shade as per dicided by the Architect) Complete in all respect to the entire satisfaction of the Engineer-in-Charge. (NS)
5063.39
1952
9883737.28
... More
Providig and fixing double wall corrugated polycarbonate sheet roofing including vertical/curved/horizontal surface fixed with stainless steel drilling screws 6mm diameter with water tight polymer washer or with G.I limpets washers filled with white lead and including overlapping complete (up to any pitch in horizontal/vertical or curved surfaces) excluding the cost of purlin, rafters and trusses and including cutting to size and shape wherever required 6 mm thick plain polycarbonate sheet with UV coating.complete in all respect to the entire satisfaction of the engineer incharge. (NS)
500
1161
580500
... More
Providing and fixing 6” i\d unplasticised rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion (i) single socketed pipes with clips of approved design U-PVC rain water pipes with M.S. screws etc. including cutting brick work and fixing cement mortar 1:4 & making the good the wall complete in all respect to the satisfaction of the Engineer-in-charge.(NS)
80
536
42880
... More
Providing and fixing 6” i\d unplasticised rigid PVC moulded fittings/accessories for unplasticised rain water pipes junction (single tee with door) confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion for single socketed pipes including cutting brick work and fixing cement mortar 1:4 & making the good the wall complete in all respect to the satisfaction of the Engineer-in-charge.(NS)
10
331
3310
... More
Providing and fixing 6” i\d unplasticised rigid PVC moulded fittings/accessories for unplasticised rain water pipes collar (plain) confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion for single socketed pipes including cutting brick work and fixing cement mortar 1:4 & making the good the wall complete in all respect to the satisfaction of the Engineer-in-charge.(NS)
10
225
2250
... More
Providing and fixing 6” i\d unplasticised rigid PVC moulded fittings/accessories for unplasticised rain water pipes bend confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion for single socketed pipes including cutting brick work and fixing cement mortar 1:4 & making the good the wall complete in all respect to the satisfaction of the Engineer-in-charge.(NS)
10
309
3090
... More
First class burnt brick work laid in cement sand mortar 1:6 (1 cement: 6 coarse sand) with F.P.S bricks of class designation 100 (average compressive stregth not less than 105 kg per sq.cm.) in foundation and plinth complete in all respect to the entire satisfaction of the Engineer-in-Charge.(NS)
19.36
8601
166515.36
... More
First class burnt brick work laid in cement sand mortar 1:6 (1 cement: 6 coarse sand) with F.P.S bricks of class designation 100 (average compressive stregth not less than 105 kg per sq.cm.) in superstructure in any height including lead and lift complete in all respect to the entire satisfaction of the Engineer-in-Charge. (NS)
289
9149
2644061
... More
Providing and fixing Glass mossaic tiles on finished plain wall surface of chips size 20 mm x 20 mm to 75 mm x 75mm (as approved by Architect) in all colour, design , fixing in customize design as per direction of Engineer-in- Charge.The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge.( make:- Coral, AGL, Shinex) complete in all respect to the entire satisfaction of the Engineer-in-Charge.(NS)
624
3642
2272608
... More
Providing and fixing of automatic sensor door (11P4.2 mtr) comprising of engine case cover, motor, controller (11PWMC) remote for opening and closong sensor complete for opening 7'H with BI parting opening of 12 mm thick toughened glass using connector(OGC/4A) oz-sl-4A-A6 whenever required and fitting with pivot at top and bottom with heavy duty fittings Dorma/Ozon including required fittings as per approved make complete in all respect to the entire satisfaction of the Engineer-in-charge & as per pattern specified in architect drawing.(NS)
10
33245
332450
... More
Providing and fixing fire rated doors made up of 1.00 mm thick G.I sheets, Door leaf 44 mm thick, and door frame of 1.5 mm thick G.I sheet , with rockwool as infill material with polyster powder coated finish with complete hardware i.e SS ball bearing hinges, mortise latch lock with lever handle,single fire rated Glass (120 minutes rating) of 318 x 318 mm, Door closer TS 1000 STD ARM, Automatic drop seal, door seal, SS304 kick plate one side (300 mm ht. , 0.8 mm thick) , flush bolt complete (120 minutes rating) in all respect to the entire satisfaction of the engineer in charge. (make:- synergy thrislington, sukriti, saptech)(NS)
50
18488
924400
... More
Providing & fixing PUF panels with suitable flushing of all joints in walls & roofs having following specifications :- i)The bulk density of PUF insulation should be 40kg+2kg/cum. ii) Thernal conductivity K-0.022 watt/mk. iii) Over heated transfer coeficient U-0.336 watt/sqmk iv) Flammability -B2 KIN 4102 part-1 v) Blowing agent (non CFC) - R141B the outer colour coated GI skin of the panel be 0.5mm thick coated with 50 micron thick PVC guard flim on the finished surface base metal of GI shin CRCA should be as per IS-513 and galvanization as per 120IS277. Complete in all respect to the entire satisfaction of the Engineer-in-Charge.(NS)
-
-
-
... More
75mm thick panels with 0.5mm PPGI sheet with microribs for wall.
56.92
2615
148845.8
... More
50x70mm thick panels with 0.5mm PPGI sheet with microribs for roof.
50.5
2384
120392
... More
Providing and fixing ACP sheet of 4.00 mm thick for boxing of AHU duct at any height complete in all respect to the entire satisfaction of the engineer in charge.(virgo or Aldecor or Alstone)(NS)
1000
1082
1082000
... More
Providing & fixing metal false ceiling system tiles with metal tile of size 595x595mm manufactured out of .50mm thick polyester coil coated galvanized steel 120/180 gms zinc coating alloy having square or beveled edges including coil coated steel tile should have 20 micron polyster coated finish and back side coated of 5 micron alkyd primr as per pattern specified in architect drawing no WD/ARCH/3 job no 554 the exposed metal grid comprises of main runners and cross tees,roll formed from galvanized steel of 180 gms zinc coating.the main and cross tees shall be provide by byeonet coupling having a height 38mm and 25mm .The grid shall be suspended from the roof with G.I wire rods by suspension hangers at max. 1200mm and filled withb 1200mm/600mm cross tees. hangers shall be fixed to roof by expansion fasterners. Wall angle shall be 24mm x 24mm x 0.4mm thick coil coated steel matching the door of the tile. make - Armstrong or equivelant.the entire work shall be complete in all respect as per architectural drawing and as per the direction of the Engineer in charge. (NS)
600.17
1947
1168527.1
... More
Providing & Fixing of metal ceiling tiles size 595mmx595mm on existing grid, the repair of existing grid or required any new member for existing Ceiling grid is included complete in all respect to the entire satisfaction of the engineer incharge.(NS)
1400
1182
1654800
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. (Note:- This item paid only one time for the particular area, shall not be paid seperately for executing different items) Complete in all respect to the entire satisfaction of the Engineer-in-Charge. (NS)
5196
250
1299000
... More
Providing & fixing 6 mm thick Lacquered glass of specified colour, fixed with Silicon sealent and with necessary hardware (like screws,studs etc.) if required over existing ply board base .The glass must be properly finished from edges , machine grinded & polished .The groove between glass to glass joint shall be finished with silicon sealant all complete as per direction of Engineer-in-Charge.
(Make: Saint Gobain, Asahi, ModiFloat, Gold plus) (NS)
158.64
5753
912655.92
... More
Providing and fixing 12 mm thick bison board for covering the ducts (except frame) complete in all respect to the entire satisfaction of the engineer in charge. (Make:- Greenply, Century, Archidply, Duro). (NS)
350
1703
596050
... More
Providing and fixing 16mm to 18 mm thick gang saw cut granite jet black, (mirror polished, premoulded) and pre polished machine cut for flooring/kitchen platforms, vanity counters, windows sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edge to give high gloss finish etc. complete at all levels as per architect drawinng & design. Complete in all respect to the entire satisfaction of the Engineer-in-Charge. (NS)
200
3519
703800
... More
Providing and fixing 12mm thick Premium quality Commercial Ply to be fixed over existing frame with the help of screws in any height including lead and lift. complete in all respect and to the entire satisfaction of engineer-in-charge.(Make: Greenply, Duro, Century, Archidply) (NS)
249.36
1452
362070.72
... More
Providing and fixing 1mm thick Laminate to be fixed over existing ply with the help of adhesive and nails complete in all respect to the entire satisfaction of engineer- in-charge.
(Make: Greenply, Century, Archid, Duro) (NS)
150
1042
156300
... More
Providing and fixing Auditorium chairs with wooden waterfall armrest with Auto tip up. The chair comprises of the seat and back which is made up of basic frame work of high quality metal upholstered with thick automotive P.U foam and high performance fabric on the frontside of seat and backrest and same has back cover with polypropylene copolymer/quality injection moulded plastic. Each chair is seperated with vertical side wings comprising of wooden waterfall armrest on the top and the flange with provision for 2 no.s bolts/fastner at the bottom to grout and fasten the chairs into the floor complete in all respect(including chemical required for fasten). The chair should comprise of following specification:- (NS)
-
-
-
... More
Dimensions of chair:- i) Seat :- (W x D x T) = 480 (+/- 10)x 445(+/- 10) x 110(+/- 10) mm, ii) Backrest :- (W x H x T) = 480(+/- 10) x 730(+/- 10) x 110 (+/- 10) mm, iii) Backheight of the chair from floor upto PPCP :- 1040 (+/- 10) mm, iv) Armrest cente to center :- 1'10" c/c (avg.).
-
-
-
... More
Foam used for seat and back:- High resilence Polyurathene foam should be used with following specification:- i) density of foam for seat and backrest is 50(+/- 5) kg/m3. ii)IFD (Indentation Force Deflection) @25% :- 20 (+/- 4) for the seat and 15(+/- 3) for the back. Iii) projection of one inch of the seat to go inside the outer injection moulded plastic shell seat cushioning to be about 120 mmin the front duly rounded and tapered to be about 60 mm in the rear with sunk portion in the centre.
-
-
-
... More
Spring used for seat:- for auto tip up action the bottom of the seat is fitted with torsion spring/ spring steel IS:4454 1981 Grade 3 tested for 1 lakh cycles for the tip up movement. Bottom of the seat have concealed springs on either side tip up tube to support the shell. Tip up seat should be noise free with spring loaded auto tip up seat movement.
-
-
-
... More
Housing used for seat and back:- a) Back rest housing cover:- the back cover is made up of PPCP(polypropylene copolymer is a thermoplastic polymer material) IS: 10915 1994./injection moulded/Thermoform plastic. PPCP housing is 3 mm thick. Size of the back is 755 (+/- 10) mm X 450 mm(+/- 10). b) Seat housing:- The seat cover is made up of PPCP(polypropylene copolymer is a thermoplastic polymer material) IS: 10915 1994/injection moulded/Thermoform plastic. PPCP housing is 3 mm thick.
-
-
-
... More
Structure of seat & back:- Back rest is built in metal frame made of ERW(Electric resistance welded tube)/ IS:3074-2005 GRADe-1, 15.8 dia round pipe 1.2mm (min.) thickness and extra reinforcement 15.8 dia round pipe 1.2 mm (min.) @3no.s, 3.8mm metal wire support supports used with 3 rows of zig zag springs attached to metal tube. cushion frame(seat) ERW tube/ IS:3074-2005 GRADE-1, 19 mm dia round pipe 1.2 mm(min.)thickness
-
-
-
... More
Fixed back chair with wooden armrest with wings (side and middle stand) compoment :-a) wing frame is a consist of CRCA(Cold Rolled Close Annealed)/HRCA(Hot rolled close annealed) sheet metal / IS:1079-1994. a) wing frame is a rectangular frame of 50 x 25 mm , b) leg sq. tube IS:4923-1997-25x25mm, 1.63 mm thickness. C) base plate or grouting plate is 200 mm x 100mm with 2 mm thickness. Metal base plate has two counter sunk hole for grouting with 2 no.s gi fastners (size as per site requirement) (Hilti or its equivalent make fastner to be used & 9 mm thick BWP ply to be used in wings frame)
-
-
-
... More
ARMREST:- one piece wooden waterfall armrest with 460 mm length and 75 mm breadth and bolted to the wing frame at the top.(415 x 55 mm x 3 mm thick)
-
-
-
... More
FINISH:- a) all metal to be properly Pre-treated as per nine tank cleaning process. b) all fastners are zinc passivated. C) all exposed and hidden metal component to be electrostatically powder coated with thickness of atleast 65 microns. All metal welded joints are well finished/buffed and concealed.
-
-
-
... More
Fabric:- heavy duty 100% polyster dyed yarn with 3mm + 4 mm foam back
-
-
-
... More
Aisle side lamp:- Provision for light on side along with aisle made of Polypropelene Housing. (With led 2 watt ) Note:- only for corner seats.
-
-
-
... More
Row numbering :- for seats along the aisles made of 2 mm aluminium cutouts with numbering A.B.C……
-
-
-
... More
Seat numbering:- on back and tip up portion 2 mm aluminium oval strips with numbering 1,2,3….
-
-
-
... More
Test :- All the test certificates of material should be submitted before submitted the bill:- a) backrest durability test :- 120,000 cycle b) Armrest Durability test:- 50,000 cycles, c) seating durability test:- 100,000 cycles, d) structure durability test:- 25000 cycles. e) fabric test certificate f) foam test certificate, g) metal frame certificate etc. h) BIFMA (Business and institutional furniture manufacturers association) certification required.
-
-
-
... More
P.U logo (5" dia) should be embossed as decided by the Architect.
-
-
-
... More
The shop drawing of seating arrangement and sample of chairs should be submitted by the agency at their own cost and get approval of same before the execution of the work. All the chairs to be supplied at site in one lot and chair can be randomly checked from that lot and if that chair found defective all chairs should be replaced from the site at agency cost only. (numbers of chair can be vary as per site requirement which will be approved by the department).The warranty of chairs should be 10 years from the date of completion of the work. Tolerance of +- 5 mm in dimension as given to be accepatable. (NS)
2096
14450
30287200
... More
Providing and fixing Auditorium chairs with wooden waterfall armrest with Push back and Auto tip up. The chair comprises of the seat and back which is made up of basic frame work of high quality metal upholstered with thick automotive P.U foam and high performance fabric on the frontside of seat and backrest and same has back cover with polypropylene copolymer/quality injection moulded plastic. Each chair is seperated with vertical side wings comprising of wooden waterfall armrest on the top and the flange with provision for 2 no.s bolts/fastner at the bottom to grout and fasten the chairs into the floor (including chemical required for fasten). The chair should comprise of following specification:-
-
-
-
... More
Dimensions of chair:- i) Seat :- (W x D x T) = 480 (+/- 10)x 445(+/- 10) x 110(+/- 10) mm, ii) Backrest :- (W x H x T) = 480(+/- 10) x 730(+/- 10) x 110 (+/- 10) mm, iii) Backheight of the chair from floor upto PPCP :- 1040 (+/- 10) mm, iv) Armrest cente to center :- 1'10" c/c (avg.).
-
-
-
... More
Foam used for seat and back:- High resilence Polyurathene foam should be used with following specification:- i) density of foam for seat and backrest is 50(+/- 5) kg/m3. ii)IFD (Indentation Force Deflection) @25% :- 20 (+/- 4) for the seat and 15(+/- 3) for the back. Iii) projection of one inch of the seat to go inside the outer injection moulded plastic shell seat cushioning to be about 120 mmin the front duly rounded and tapered to be about 60 mm in the rear with sunk portion in the centre.
-
-
-
... More
Spring used for seat:- for auto tip up action the bottom of the seat is fitted with torsion spring/ spring steel IS:4454 1981 Grade 3 tested for 1 lakh cycles for the tip up movement. Bottom of the seat have concealed springs on either side tip up tube to support the shell. Tip up seat should be noise free with spring loaded auto tip up seat movement. automotive heavy metal sliding channel mechanism with 140 (+-10) mm push back.
-
-
-
... More
Housing used for seat and back:- a) Back rest housing cover:- the back cover is made up of PPCP(polypropylene copolymer is a thermoplastic polymer material) IS: 10915 1994./injection moulded/Thermoform plastic. PPCP housing is 3 mm thick. Size of the back is 755 (+/- 10) mm X 450 mm(+/- 10). b) Seat housing:- The seat cover is made up of PPCP(polypropylene copolymer is a thermoplastic polymer material) IS: 10915 1994/injection moulded/Thermoform plastic. PPCP housing is 3 mm thick.
-
-
-
... More
Structure of seat & back:- Back rest is built in metal frame made of ERW(Electric resistance welded tube)/ IS:3074-2005 GRADe-1, 15.8 dia round pipe 1.2mm (min.) thickness and extra reinforcement 15.8 dia round pipe 1.2 mm (min.) @3no.s, 3.8mm metal wire support supports used with 3 rows of zig zag springs attached to metal tube. cushion frame(seat) ERW tube/ IS:3074-2005 GRADE-1, 19 mm dia round pipe 1.2 mm(min.)thickness
-
-
-
... More
Fixed back chair with wooden armrest with wings (side and middle stand) compoment :-a) wing frame is a consist of CRCA(Cold Rolled Close Annealed)/HRCA(Hot rolled close annealed) sheet metal / IS:1079-1994. a) wing frame is a rectangular frame of 50 x 25 mm , b) leg sq. tube IS:4923-1997-25x25mm, 1.63 mm thickness. C) base plate or grouting plate is 200 mm x 100mm with 2 mm thickness. Metal base plate has two counter sunk hole for grouting with 2 no.s gi fastners (size as per site requirement) (Hilti or its equivalent make fastner to be used & 9 mm thick BWP ply to be used in wings frame)
-
-
-
... More
ARMREST:- one piece wooden waterfall armrest with 460 mm length and 75 mm breadth and bolted to the wing frame at the top.(415 x 55 mm x 3 mm thick)
-
-
-
... More
FINISH:- a) all metal to be properly Pre-treated as per nine tank cleaning process. b) all fastners are zinc passivated. C) all exposed and hidden metal component to be electrostatically powder coated with thickness of atleast 65 microns. All metal welded joints are well finished/buffed and concealed.
-
-
-
... More
Fabric:- heavy duty 100% polyster dyed yarn with 3mm + 4 mm foam back
-
-
-
... More
Aisle side lamp:- Provision for light on side along with aisle made of Polypropelene Housing. (With led 2 watt ) Note:- only for corner seats.
-
-
-
... More
Row numbering :- for seats along the aisles made of 2 mm aluminium cutouts with numbering A.B.C……
-
-
-
... More
Seat numbering:- on back and tip up portion 2 mm aluminium oval strips with numbering 1,2,3….
-
-
-
... More
Test :- All the test certificates of material should be submitted before submitted the bill:- a) backrest durability test :- 120,000 cycle b) Armrest Durability test:- 50,000 cycles, c) seating durability test:- 100,000 cycles, d) structure durability test:- 25000 cycles. e) fabric test certificate f) foam test certificate, g) metal frame certificate etc. h) BIFMA (Business and institutional furniture manufacturers association) certification required.
-
-
-
... More
P.U logo (5" dia) should be embossed as decided by the Architect.
-
-
-
... More
The shop drawing of seating arrangement and sample of chairs should be submitted by the agency at their own cost and get approval of same before the execution of the work. All the chairs to be supplied at site in one lot and chair can be randomly checked from that lot and if that chair found defective all chairs should be replaced from the site at agency cost only. (numbers of chair can be vary as per site requirement which will be approved by the department).The warranty of chairs should be 10 years from the date of completion of the work. Tolerance of +- 5 mm in dimension as given to be accepatable. (NS)
112
14839
1661968
... More
Providing and fixing 4mm Veneer to be fixed over existing ply with the help of adhesive and nails complete in all respect to the entire satisfaction of engineer- in-charge.
(Make: Greenply, Century, Archidply, Duro) (NS)
212.08
4338
920011.72
... More
Providing and fixing of murals made/cut out & assembled in specially handcrafted & coloured ceramic fired/glazed tiles in all colours including required chemical over existing rough plaster. Make:- Raja hand made tile. The apeksha, LS mosaic Complete in all respect to the entier satisfaction of the Engineer-in-Charge. (NS)
364.38
3478
1267296.25
... More
Providing and fixing Acrylic sheet of 6 mm thick for boxing of AHU duct at any height. Complete in all respect to the entier satisfaction of the Engineer-in-Charge.(NS)
215.05
277
59568.85
... More
Extra rate for CNC/water jet cutting in Red sand stone dholapur stone upto 30 mm thickness. Complete in all respect to the entier satisfaction of the Engineer-in-Charge. (NS)
215.05
1119
240640.95
... More
Providing and laying 60mm thick factory made chamfered edge machine moulded interlock paver blocks (M-35 grade) of make NTC/ NITCO/SHAM/MTPM reflective matt finish of two equal colours i.e. grey and red laid over 100 mm thick cement concrete 1:5:10 with 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paverblocks as per required size and pattern, finishing and sweeping extra sand. Complete in all respect to the entire satisfaction of the engineer-in-charge.(NS)
4685.71
1398
6550622.58
... More
Providing, fixing, testing & commissioning of Nozzles complete in all respect as per architect drawing:- (NS)
-
-
-
... More
Floor Inlets
60
948
56880
... More
Bubbler Nozzle
32
5765
184480
... More
Providing, fixing, testing & commissioning of Lights complete in all respect as per architect drawing:- (NS)
-
-
-
... More
Light in SS 316 24V 03Watt
50
7239
361950
... More
Light in SS 316 24V 18Watt
32
28899
924768
... More
Power Supply
15
21222
318330
... More
RGB Controller
1
65680
65680
... More
Providing, fixing, testing & commissioning of Filter Pumps complete in all respect as per architect drawing:- (NS)
-
-
-
... More
3 HP Sub. Pump(1W+1S) (make approved by department)
2
40196
80392
... More
10 HP Sub. Pump
1
123131
123131
... More
Providing, fixing, testing & commissioning of Filter complete in all respect as per architect drawing:- (NS)
-
-
-
... More
Sand/Bio Filter Top-mounted With MPV (1200 Dia)
1
120413
120413
... More
Sand for Sand Filter (SIZE 16/32 Mesh)
1000
21
21000
... More
Providing, fixing, testing & commissioning of Chlorine/ Acid Dosing Unit complete in all respect as per architect drawing:-
-
-
-
... More
Chlorine Dosing Unit (NS)
4
14523
58092
... More
Providing, fixing, testing & commissioning of Cleaning Kit complete in all respect as per architect drawing:-
-
-
-
... More
trolley mounted Cleaning Kit (NS)
1
145590
145590
... More
Providing, fixing, testing & commissioning of Control Panel (Equipments Make-L & T, Heger, Elmex, Rishabh, FTC, Esbee, Salzer etc.) complete in all respect as per architect drawing. (NS)
1
80275
80275
... More
Providing and fixing of pipes (uPVC pipe- 10 Pressure) (Heavy) complete in all respect to the entire satisfaction of the engineer incharge. (NS)
60
827
49620
... More
Providing and fixing soil, waste and vent pipes
-
-
-
... More
100mm dia
-
-
-
... More
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 (DSR ref. 17.35.1.2)
100
1123
112300
... More
75mm diameter
-
-
-
... More
Centrifugally cast (spun) iron socketed pipe as per IS: 3989 (DSR ref. 17.35.2.2)
100
1134
113400
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
... More
75mm dia
-
-
-
... More
Sand cast iron S&S as per IS- 3989 (DSR ref. 17.38.2.2)
50
535
26750
... More
Providing and fixing plain bend of required degree.
-
-
-
... More
100mm dia
-
-
-
... More
Sand cast iron S&S as per IS : 3989 (DSR ref. 17.39.1.2)
50
557
27850
... More
Providing and fixing heel rest sanitary bend
-
-
-
... More
100mm dia
-
-
-
... More
Sand cast iron S&S as per IS-3989 (DSR ref. 17.40.1.2)
50
537
26850
... More
75mm dia
-
-
-
... More
Sand cast iron S&S as per IS-3989 (DSR ref. 17.40.2.2)
45
493
22185
... More
Providing and fixing collar
-
-
-
... More
100mm
-
-
-
... More
Sand cast iron S&S as per IS-3989 (DSR ref. 17.57.1.2)
40
502
20080
... More
75mm
-
-
-
... More
Sand cast iron S&S as per IS-3989 (DSR ref. 17.57.2.2)
40
354
14160
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
-
-
-
... More
100mm (DSR ref. 17.58.1)
150
532
79800
... More
75mm (DSR ref. 17.58.2)
180
454
81720
... More
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
-
-
-
... More
100mm (DSR ref. 17.59.1)
25
137
3425
... More
75mm (DSR ref. 17.52.2)
25
88
2200
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
... More
100mm inlet and 75mm outlet
-
-
-
... More
Sand cast iron S&S as per IS-3989 (DSR ref. 17.60.2.1)
25
1544
38600
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
... More
Internal work - Exposed on wall
-
-
-
... More
15mm nominal bore (DSR ref. 18.10.1)
200
298
59600
... More
20mm nominal bore (DSR ref. 18.10.2)
250
361
90250
... More
25mm nominal bore (DSR ref. 18.10.3)
150
467
70050
... More
32mm nominal bore (DSR ref. 18.10.4)
150
570
85500
... More
40mm nominal bore (DSR ref. 18.10.5)
50
690
34500
... More
50mm nominal bore (DSR ref. 18.10.6)
180
899
161820
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
... More
15mm diameter pipe (DSR ref. 18.40.1)
200
10
2098
... More
20mm diameter pipe (DSR ref. 18.40.2)
250
12
3130
... More
25mm diameter pipe (DSR ref. 18.40.3)
150
15
2389.5
... More
32mm diameter pipe (DSR ref. 18.40.4)
150
19
2872.5
... More
40mm diameter pipe (DSR ref. 18.40.5)
50
21
1089.5
... More
50mm diameter pipe (DSR ref. 18.40.6)
180
26
4717.8
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
15mm nominal bore (DSR ref. 18.46.1)
50
226
11300
... More
20mm nominal bore (DSR ref. 18.46.2)
40
254
10160
... More
25mm nominal bore (DSR ref. 18.46.3)
32
344
11008
... More
32mm nominal bore (DSR ref. 18.46.4)
25
393
9825
... More
40mm nominal bore (DSR ref. 18.46.5)
20
532
10640
... More
50mm nominal bore (DSR ref. 18.46.6)
15
689
10335
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR ref. 18.48)
30000
10
322200
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
... More
100x100mm size P type
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR ref. 19.4.1.1)
4
2637
10548
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : (NS)
-
-
-
... More
300 mm dia. R.C.C. pipe (DSR ref. 19.6.4)
600
883
529800
... More
450 mm dia. R.C.C. pipe (DSR ref. 19.6.5)
900
1471
1323900
... More
Providing and fixing wash basin with 32 mm C.P brass waste of standard pattern cutting and making good the wall wherever require:- white vitreous china wash basin over counter/ bowl basin (size 410x410x160 mm) (parryware model no. C8931) complete in all respect to the entire satisfaction of the engineer incharge. (NS)
12
7403
88836
... More
Providing and fixing of oval or round hand wash basin 45cm dia vitreous chinaware in any height complete in all respect to the entire satisfaction of the Engineer-in-charge. (NS)
60
3105
186300
... More
Providing and fixing white viterous china floor mounting european type water closet, CP bolts, nuts CI chair or other hanging arrangement with viterous china watersaver dual flush 5 litre flushing cistern and internal fitting,with solid plastic seat and cover with lid,CP brass hinge rubber buffers, with accessories, including cutting and making good the wall and floors wherever required.(parryware model no. :- C8902)( size:- 690x395x750 mm) complete in all respect to the entire satisfaction of the engineer in charge. (NS)
75
20746
1555950
... More
Providing and fixing C.P brass bib cock of approved quality conforming to (parryware model no. :- T4604A1) with all required materials complete in all respect to the entire satisfaction of the engineer incharge. (NS)
77
964
74228
... More
Providing and fixing C.P brass push cock of approved quality conforming to (parryware model no. :- G2056A1) with required materials complete in all respect to the entire satisfaction of the engineer in charge. (NS)
10
2235
22350
... More
Providing and fixing of white colour viterous china large flat back/half stall urinal size including CP brass waste with dome type grating, wall flanges complete( parryware model no. :- C0583) (size:- 380x450x590mm) complete in all respect to the entire satisfaction of the Engineer in charge. (NS)
110
8488
933680
... More
Providing and fixing C.P brass urinal valve auto closing of approved quality conforming to (parryware model no. :- G2007A1) with required materials complete in all respect to the entire satisfaction of the Engineer in charge. (NS)
110
1900
209000
... More
Providing and fixing C.P brass angle valve of approved quality conforming to (parryware model no. :- T9828A1) with required materials complete in all respect to the entire satisfaction of the Engineer in charge. (NS)
299
494
147706
... More
Providing and fixing 15mm C.P brass pillar taps of approved quality conforming to (parryware model no. :- G4864A1) with required materials complete in all respect to the entire satisfaction of the Engineer in charge. (NS)
60
2859
171540
... More
Providing and fixing C.P brass bottle trap with extension piece of approved quality conforming to (parryware model no. :- T3203A1 or same range of other make ) with required materials complete in all respect to the entire satisfaction of the Engineer in charge. (NS)
182
1692
307944
... More
Providing and fixing white viterous china wall hang european type water closet, CP bolts, nuts CI chair or other hanging arrangement with concealed 5 litre flushing cistern and internal fitting,with solid plastic seat and cover with lid,CP brass hinge rubber buffers, with accessories, including cutting and making good the wall and floors wherever required.(parryware model no. :- C8897 or same range of other make )( size:- 540x370x350 mm) complete in all respect to the entire satisfaction of the engineer in charge.. (NS)
4
16712
66848
... More
P/F of tank nipple with all required material for water tank in any height complete in all respect to the entire satisfaction of the Engineer-in-charge. (NS)
-
-
-
... More
40mm
5
536
2680
... More
50mm
10
730
7300
... More
P/F of ball cock with all required material in any height complete in all respect to the entire satisfaction of the Engineer-in-charge. (NS)
-
-
-
... More
50mm dia
20
1605
32100
... More
Providing and fixing C.P hand spray (health faucet for EWC) with push button control and flexible hose connection with C.P holder for hand spray. (parryware model no. :- T9805A1) complete in all respect to the entire satisfaction of the engineer in charge. (NS)
77
836
64372
... More
P/F wall mounted lotion dispenser 200 ml liquid capacity Make :- viking or equivalent container with required materials complete in all respect to the entire satisfaction of the Engineer-in-Charge.(NS)
41
774
31734
... More
P/F C.P. brass towel rail 600mmx20mm size complete with brackets fixed in wooden cleats with C.P. brass screws in any height including lead and lift Complete in all respect to the entire satisfaction of the engineer-in-charge.(NS)
41
642
26322
... More
P/F C.P. towel ring with required materials in any height including lead and lift Complete in all respect to the entire satisfaction of the engineer-in-charge.(NS)
41
414
16974
... More
Providing and fixing in position best Indian make Venus, Record, Usha, Bajaj storage type of 25 ltrs. automatic electric water heater automatically controlled, suitable for 230V 50 cycles single phase, vertical wall mounting fitted with adjustable type A.C. thermostat. Thermostat should be drawn without having to drain the water. Electric heating element copper tube a neon indicator 1 amp. Inner container made of copper tinned both from inside & outside outer container made of sheet (M.S.) finishing in gleaming white stove enamel paint insulated between inner & outer fiber glass wool with 1 Mtr. Length of suitable 3 core flexible cord with plug & non return valve in any height including lead and lift complete in all respect to the entire satisfaction of the Engineer-in-charge.(NS)
7
11676
81732
... More
P/F 6 pin coth hanger door wall hooks rail set for hanging cloth with powder coated in bathrooms including all required materials complete in all respect to the entire satisfaction of the Engineer-in-Charge. (NS)
41
175
7175
... More
supplyingh and fixing of foollowing sizes PVC pipe conduit alongwith accessories in surfaces/recessed including cutting the wall and making good the same in case of recessed conduit as required
-
-
-
... More
25 mm (DSR ref. 1.21.2)
500
131
65500
... More
supplying and drawing UTP 4 pair cat6 Lan cablein the existing surface/recessed steel/ PVC conduit as required
-
-
-
... More
4 pair UTP CAT 6- 1 run of Cable (DSR ref. 1.53.1)
4000
55
220000
... More
Supply & fixing MV danger notice plate of 200 mm x 150mm, made of mild steel sheet of minimum 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required. (DSR ref. 2.21)
4
238
952
... More
Supply & fixing HT danger notice plate of 250 mm x 200mm, made of mild steel sheet of minimum 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.(DSR ref. 2.22)
4
263
1052
... More
supplying , installation , including suspension ,testing and commissioning of following capacity bus trunking with aluminium bar having current density of 130 A/ sq cm at nominal current rating in 1.6 mm thick IP 42 sheet enclosure in convenint sections for use on 3 phase 4 wirte 415 V, 50 Hz , AC supply including jointing of sections, flexible jooints , expansion joints, bends and earthing with 2 runs of glvanised iron strip, suspenders, angle iron bracket, steel fastners, connecting to earthing system etc. as required .
-
-
-
... More
1600 Amp (DSR ref. 3.5.5)
40
27565
1102600
... More
supply and installing of following sizes of perforated with powder coated MS cable Tray
-
-
-
... More
150 mm width x50 mm depth x 1.6 mm thickness (DSR ref. 4.1.2)
3000
571
1713000
... More
600 mm width x50 mm depth x 2.0 mm thickness (DSR ref. 4.1.7)
298
1367
407366
... More
900mm width x75 mm depth x 2.0 mm thichness (DSR ref. 4.1.16)
238
2569
611422
... More
supply and installing of following sizes of perforated with powder coated MS cable Tray bed
-
-
-
... More
600 mm width x50 mm depth x 2.0 mm thickness (DSR ref. 4.2.7
5
2923
14615
... More
900mm width x75 mm depth x 2.0 mm thichness (DSR ref. 4.2.16)
5
4355
21775
... More
supply and installing of following sizes of perforated with powder coated MS cable Tee
-
-
-
... More
900mm width x75 mm depth x 2.0 mm thichness (DSR ref. 4.3.16)
4
5283
21132
... More
Providing and fixing of copper strip 50 x5 mm on surface or in recess (DSR ref. 5.2)
1302
2165
2818830
... More
Earthing with GI earth Plate 600 mm x600mm x6 mm thick including accessories and providing masonary encolosure with cover plate having locking arrangenet and watering pipe of 2.7 mtr long etc with charcoal / coke and salt as required (DSR ref. 5.4)
28
7297
204316
... More
Earthing with copper plate 600 mm x600 mm x3 mm thick including accressories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc with charcoal /coke and salt as required (DSR ref. 5.6)
6
13949
83694
... More
Providing and fixing of copper strip 25 x5 mm on surface or in recess (DSR ref. 5.14)
881
1176
1036056
... More
Providing and fixing of GI strip 25 x5 mm on surface or in recess (DSR ref. 5.15)
1822
217
395374
... More
Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing along with existing surfcae / recessed conduit submain wiring /cables as required (DSR ref. 5.18)
8296
36
298656
... More
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing alongwith existing surface / recssed conduit/ submain wiring / cable as required (DSR ref. 5.19)
1133
124
140492
... More
providng and fixing of lighting conductor fnial made of 25 mm dia 300 mm long , GI tube ,having (DSR ref. 6.2)
12
462
5544
... More
Providing and fixing GI Tape 20mmx3 mm thick on parapet (DSR ref. 6.7)
291
113
32883
... More
Supplying and making end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathes /XLPE aluminium conductor of 1.1 KV hrage as required
-
-
-
... More
3.5 x25 sqmm (DSR ref. 9.1.20)
21
274
5754
... More
3.5 x 35 sqmm (DSR ref. 9.1.21)
22
321
7062
... More
3.5 x 50 sqmm(DSR ref. 9.1.22)
34
367
12478
... More
3.5 x70 sqmm (DSR ref. 9.1.23)
22
425
9350
... More
3.5 x95 sqmm (DSR ref. 9.1.24)
2
528
1056
... More
3.5 x 120 sqmm (DSR ref. 9.1.25)
2
554
1108
... More
3.5 x 185 sqmm (DSR ref. 9.1.27)
3
806
2418
... More
3.5 x240 sqmm (DSR ref. 9.1.29)
22
966
21252
... More
3.5 x300 sqmm (DSR ref. 9.1.30)
12
1141
13692
... More
4x10 sqmm (DSR ref. 9.1.32)
26
228
5928
... More
4x16 sqmm (DSR ref. 9.1.33)
71
269
19099
... More
Supply and laying of PVC insulated PVC sheathed aluminium conductor armoured (3.5 core) cable of size 300 sqmm with required clamps etc on surface/ cable tray with proper tie system complete the job complete in all respect to the entire satisfaction of the Engineer-in-charge.make Polycab, KEI, havells, RR Kable (NS)
270
2397
647190
... More
Supply and laying of PVC insulated PVC sheathed aluminium conductor armoured (3.5 core) cable of size 240 sqmm with required clamps etc on surface/ cable tray complete the job in all respect to the entire satisfaction of the Engineer-in-charge.make RR Kable , polycab, KEI, havells (NS)
1430
1998
2857140
... More
Supply and laying of PVC insulated PVC sheathed aluminium conductor Armoured (3.5 core) cable of size 185 sqmm with required clamps etc on surface /in tray complete the job in all respect to the entire satisfaction of the Engineer-in-charge..make RR Kable , polycab, KEI, havells (NS)
75
1524
114300
... More
Supply and laying of PVC insulated PVC sheathed aluminium conductor Armoured (3.5 core) cable of size 95 sqmm on surface/ cable tray complete the job in all respect to the entire satisfaction of the Engineer-in-charge.make RR Kable , polycab, KEI, havells (NS)
160
867
138720
... More
Supply and laying of PVC insulated PVC sheathed aluminium conductor Armoured (3.5 core) cable of size 70 sqmm with required clamps etc on surface complete the job in all respect to the entire satisfaction of the Engineer-in-charge.make RR kable , polycab, KEI, havells (NS)
1257
714
897498
... More
Supply and laying of PVC insulated PVC sheathed aluminium conductor Armoured (3.5 core) cable of size 50 sqmm with required clamps etc on surface complete the job in all respect to the entire satisfaction of the Engineer-in-charge.make RR Kable , polycab, KEI, havells (NS)
2317
554
1283618
... More
Supply and laying of PVC insulated PVC sheathed aluminium conductor Armoured (3.5 core) cable of size 35 sqmm on surface complete the job in all respect to the entire satisfaction of the Engineer-in-charge.make RR Kable , polycab, KEI, havells (NS)
1523
387
589401
... More
Supply and laying of PVC insulated PVC sheathed aluminium conductor Armoured (3.5 core) cable of size 25 sqmm on surface complete the job in all respect to the entire satisfaction of the Engineer-in-charge.make RR kable , polycab, KEI, havells (NS)
576
323
186048
... More
Supply and laying of PVC insulated PVC sheathed aluminium conductor Armoured (4 core) cable of size 16 sqmm with required clamps etc on surface/in pipe complete the job in all respect to the entire satisfaction of the Engineer-in-charge.make RR Kable , polycab, KEI, havells (NS)
2093
286
598598
... More
Supply and laying of PVC insulated PVC sheathed aluminium conductor Armoured (4 core) cable of size 10 sqmm with required clamps etc on surface/in pipe complete the job in all respect to the entire satisfaction of the Engineer-in-charge.make RR Kable , polycab, KEI, havells (NS)
2869
247
708643
... More
Supply and erection of LED Panel 1'x 4' , 36 watt 6500 K surface light fixtures minimum efficiency 120Lm/watts,Surge protection 2.5 KV,CRI 80,THD less than 10% colour Temeprature 6500 K working hours 50,000 hours with 5 year warranty of fixture complete in all respect to the entire satisfaction of engineer incharge make wipro, Philips , Havells, (NS)
48
3694
177312
... More
Supply and erection of LED Step light 2 watt warm white 4 K high quaity 100Lm/watts complete in all respect to the entire saisfaction of engineer incharge make phillips , wipro, havells or approved by engineer incharge (NS)
176
730
128480
... More
Supply and erection of LED light 15/18 watt 6500 k on surface ,Surge protection 2.5 KV,CRI =80,THD less than 10% colour Temeprature 6500 K working hours 50,000 hours 120 lumen/watt 6500 K complete in all respect to the entire stisfaction of engineer incharge . Make wipro / phillips / havells (NS)
72
1141
82152
... More
Supply and erection of 36 watt LED Tube Batton 3600 lumens 6500 Ka Surge protection 2.5 KV,CRI =80,THD less than 10% colour Temeprature 6500 K working hours 50,000 hours ,110 lumen/watt 6500 K commercial aluminium base complete in all respect to the entire satisfaction of engineer- in-charge( make wipro phillips, Havell,s) (NS)
120
671
80520
... More
Erection of Down Lighter/square light (1'x1') with cutting of MS tile/ Gypsum board as required size for fixture with required connector and required wire with in the false ceiling complete in all respect to the entire satisfaction of engineer incharge . (NS)
115
243
27945
... More
Erection of square light (1'x1') /2'x2' on surface on ramps and other required area with required connector and required wire complete in all respect to the entire satisfaction of engineer incharge . (NS)
90
113
10170
... More
Erection of existing light fixture 2' x 2' in existing false ceiling with required connector and required wire with proper support hanging arrangement in the false ceiling complete in all respect to the entire satisfaction of engineer incharge . (NS)
132
146
19272
... More
Supply and erection of oscillating wall fan in built regulator sweep 16" plastic body with required hanging Clamp Heavy Quality complete in all respect to the entire satisfaction of engineer incharge make Crompton , Havells, Orient (NS)
69
2449
168981
... More
Supply and erecation ,commissioning , testing of factory fabricated free standing fully compactable indoor type LT panel made out of 1.6 mm thick MS sheet and having suitable size cable alley, bus bar chamber and switch compartment complete with colour coded Aluminium bus bar 1.0 Amp/ Sq mm. capacity for main bus bar to switch and from switch to cable alley or cable termination. The panel shall be powder coated after applying the pre treatment with the approved colour. The panel shall be fabricated as per approved drawings as directed by the Engineer-in-Charge. The panel should be comprising the following: ( AHU Panel 1) (NS)
-
-
-
... More
Incomer 630 amp .Four Pole 36 KA MCCB, Ics=100% Icu conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip class Make L&T , Legrand, Schneider=1Nos
-
-
-
... More
Digital Ammetre , Voltmetre , Red Yellow and blue phase indicators with the selector switch and CT's , control MCB of 2 AMP. Wiring should be done with 1.5mm2 copper conductor cable =1 set
-
-
-
... More
TPN Alumnium bus bar 600Amp having 100% neutral with heat shrinkable colored sleeves and bus bar supports at required interval complete for cross section . The current capcity density of aluminium bus shall be 1.0 Amp / sq.mm = 1 set
-
-
-
... More
Outgoing 63 AMP MCCB TP 25 KA, Ics=100% Icu,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas= 8 nos
-
-
-
... More
Outgoing 125 AMP MCCB TP 25 KA,Ics=100% Icu ,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas= 6 nos
-
-
-
... More
Outgoing 100 AMP MCCB TP 25 KA,Ics=100% Icu conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas = 3 nos
-
-
-
... More
outgoing DP MCB 20 Amp C series 10 KA =3 nos
-
-
-
... More
All interconnection /termination shall be solid aluminium. All the MCCB shall have rotary handels for ease operation and stand of panel and face sheet of stand shall also be included in the panel. Approval of drawing is mandatory before manufacturing of panel without approval of drawing panel shall be rejected without information. (NS)
1
304222
304222
... More
Supply and erection ,commissioning , testing of factory fabricated free standing fully compactable indoor type LT panel made out of 1.6 mm thick MS sheet and having suitable size cable alley, bus bar chamber and switch compartment complete with colour coded bus bar Aluminium bus bar 1.0 Amp/ Sq mm capacity for main bus bar to switch and from switch to cable alley or cable termination. The panel shall be powder coated after applying the pre treatment with the approved colour. The panel shall be fabricated as per approved drawings as directed by the Engineer-in-Charge. The panel should be comprising the following: ( AHU Panel 2)
-
-
-
... More
Incomer 630 amp .Four Pole 36 KA MCCB,Ics=100% Icu,onforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas Make L&T , Legrand, Schneider=1Nos
-
-
-
... More
Digital Ammetre , Voltmetre , Red Yellow and blue phase indicators with the selector switch and CT's , control MCB of 2 AMP. Wiring should be done with 1.5mm2 copper conductor cable =1 set
-
-
-
... More
TPN Alumnium bus bar 600Amp having 100% neutral with heat shrinkable colored sleeves and bus bar supports at required interval complete for cross section . The current capcity density of aluminium bus shall be 1.0 Amp / sq.mm = 1 set
-
-
-
... More
Outgoing 63 AMP MCCB TP 25 KA,Ics=100% Icu ,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas = 3 nos
-
-
-
... More
Outgoing 125 AMP MCCB TP 25 KA ,Ics=100% Icu ,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas= 9 nos
-
-
-
... More
Outgoing 100 AMP MCCB TP 25 KA,Ics=100% Icu,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas = 6 nos
-
-
-
... More
outgoing 250 MCCB TP 25 ka,Ics=100% Icu,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas =1 nos
-
-
-
... More
All interconnection /termination shall be solid aluminium. All the MCCB shall have rotary handels for ease operation and stand of panel and face sheet of stand shall also be included in the panel. Approval of drawing is mandatory before manufacturing of panel without approval of drawing panel shall be rejected without information. (NS)
1
323456
323456
... More
Supply and erection ,commissioning , testing of factory fabricated free standing fully compactable indoor type LT panel made out of 1.6 mm thick MS sheet and having suitable size cable alley, bus bar chamber and switch compartment complete with colour coded bus bar ofAluminium bus bar 1.0 Amp/ Sq mm/ square inch capacity for main bus bar to switch and from switch to cable alley or cable termination. The panel shall be powder coated after applying the pre treatment with the approved colour. The panel shall be fabricated as per approved drawings as directed by the Engineer-in-Charge. The panel should be comprising the following: ( AHU Panel 3)
-
-
-
... More
Incomer 250 amp .Four Pole 25 KA Ics=100% Icu, MCCB conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas Make L&T , Legrand, Schneider=1Nos
-
-
-
... More
Digital Ammetre , Voltmetre , Red Yellow and blue phase indicators with the selector switch and CT's , control MCB of 2 AMP. Wiring should be done with 1.5mm2 copper conductor cable =1 set
-
-
-
... More
TPN Alumnium bus bar 250Amp having 100% neutral with heat shrinkable colored sleeves and bus bar supports at required interval complete for cross section . The current capcity density of aluminium bus shall be 1.0 Amp / sq.mm = 1 set
-
-
-
... More
Outgoing 63 AMP MCCB TP 25 KA,Ics=100% Icu ,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas = 3 nos
-
-
-
... More
Outgoing 125 AMP MCCB TP 25 KA ,Ics=100% Icu,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas= 3 nos
-
-
-
... More
Outgoing 100 AMP MCCB TP 25 KA,Ics=100% Icu,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas = 2 nos
-
-
-
... More
All interconnection /termination shall be solid aluminium. All the MCCB shall have rotary handels for ease operation and stand of panel and face sheet of stand shall also be included in the panel. Approval of drawing is mandatory before manufacturing of panel without approval of drawing panel shall be rejected without information. (NS)
1
155789
155789
... More
Supply and erection ,commissioning , testing of factory fabricated free standing fully compactable indoor type LT panel made out of 1.6 mm thick MS sheet and having suitable size cable alley, bus bar chamber and switch compartment complete with colour coded bus bar of Aluminium bus bar 1.0 Amp/ Sq mm. capacity for main bus bar to switch and from switch to cable alley or cable termination. The panel shall be powder coated after applying the pre treatment with the approved colour. The panel shall be fabricated as per approved drawings as directed by the Engineer-in-Charge. The panel should be comprising the following: ( Sound Panel )
-
-
-
... More
Incomer 250 amp .Four Pole 25 KA,Ics=100% Icu MCCB ,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clasMake L&T , Legrand, Schneider=1Nos
-
-
-
... More
Digital Ammetre , Voltmetre , Red Yellow and blue phase indicators with the selector switch and CT's , control MCB of 2 AMP. Wiring should be done with 1.5mm2 copper conductor cable =1 set
-
-
-
... More
TPN Alumnium bus bar 250Amp having 100% neutral with heat shrinkable colored sleeves and bus bar supports at required interval complete for cross section . The current capcity density of aluminium bus shall be 1.0 Amp / sq.mm = 1 set
-
-
-
... More
Outgoing 63 AMP MCCB TP 25 KA Ics=100% Icu,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas = 4 nos
-
-
-
... More
Outgoing 100 AMP MCCB TP 25 KA, Ics=100% Icu,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas = 1 nos
-
-
-
... More
All interconnection /termination shall be solid aluminium. All the MCCB shall have rotary handels for ease operation and stand of panel and face sheet of stand shall also be included in the panel. Approval of drawing is mandatory before manufacturing of panel without approval of drawing panel shall be rejected without information. (NS)
1
104474
104474
... More
Supply and erection ,commissioning , testing of factory fabricated free standing fully compactable indoor type LT panel made out of 1.6 mm thick MS sheet and having suitable size cable alley, bus bar chamber and switch compartment complete with colour coded bus bar of Aluminium bus bar 1.0 Amp/ Sq mm capacity for main bus bar to switch and from switch to cable alley or cable termination. The panel shall be powder coated after applying the pre treatment with the approved colour. The panel shall be fabricated as per approved drawings as directed by the Engineer-in-Charge. The panel should be comprising the following: (Stage Lighting Panel )
-
-
-
... More
Incomer 250 amp .Four Pole 25 KA,Ics=100% Icu MCCB ,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas Make L&T , Legrand, Schneider=1Nos
-
-
-
... More
Digital Ammetre , Voltmetre , Red Yellow and blue phase indicators with the selector switch and CT's , control MCB of 2 AMP. Wiring should be done with 1.5mm2 copper conductor cable =1 set
-
-
-
... More
TPN Alumnium bus bar 250Amp having 100% neutral with heat shrinkable colored sleeves and bus bar supports at required interval complete for cross section . The current capcity density of aluminium bus shall be 1.0 Amp / sq.mm = 1 set
-
-
-
... More
Outgoing 63 AMP MCCB TP 25 KA,Ics=100% Icu, conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas= 5 nos
-
-
-
... More
Outgoing 100 AMP MCCB TP 25KA,Ics=100% Icu,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas = 1 nos
-
-
-
... More
All interconnection /termination shall be solid aluminium. All the MCCB shall have rotary handels for ease operation and stand of panel and face sheet of stand shall also be included in the panel. Approval of drawing is mandatory before manufacturing of panel without approval of drawing panel shall be rejected without information. (NS)
1
107723
107723
... More
Supply and erection ,commissioning , testing of factory fabricated free standing fully compactable indoor type LT panel made out of 1.6 mm thick MS sheet and having suitable size cable alley, bus bar chamber and switch compartment complete with colour coded bus bar of Aluminium bus bar 1.0 Amp/ Sq mm capacity for main bus bar to switch and from switch to cable alley or cable termination. The panel shall be powder coated after applying the pre treatment with the approved colour. The panel shall be fabricated as per approved drawings as directed by the Engineer-in-Charge. The panel should be comprising the following: (Electrical Lighting Panel )
-
-
-
... More
Incomer 160 amp .Four Pole 25 KA, Ics=100% Icu,MCCB conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas Make L&T , Legrand, Schneider=1Nos
-
-
-
... More
Digital Ammetre , Voltmetre , Red Yellow and blue phase indicators with the selector switch and CT's , control MCB of 2 AMP. Wiring should be done with 1.5mm2 copper conductor cable =1 set
-
-
-
... More
TPN Alumnium bus bar 200Amp having 100% neutral with heat shrinkable colored sleeves and bus bar supports at required interval complete for cross section . The current capcity density of aluminium bus shall be 1.0 Amp / sq.mm = 1 set
-
-
-
... More
Outgoing 63 AMP MCCB TP 25 KA,Ics=100% Icu, conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas= 6 nos
-
-
-
... More
dummy =2 nos
-
-
-
... More
All interconnection /termination shall be solid aluminium. All the MCCB shall have rotary handels for ease operation and stand of panel and face sheet of stand shall also be included in the panel. Approval of drawing is mandatory before manufacturing of panel without approval of drawing panel shall be rejected without information. (NS)
1
108507
108507
... More
Supply and erecation ,commissioning , testing of factory fabricated free standing fully compactable indoor type LT panel made out of 1.6 mm thick MS sheet and having suitable size cable alley, bus bar chamber and switch compartment complete with colour coded bus barAluminium bus bar 1.0 Amp/ Sq mm capacity for main bus bar to switch and from switch to cable alley or cable termination. The panel shall be powder coated after applying the pre treatment with the approved colour. The panel shall be fabricated as per approved drawings as directed by the Engineer-in-Charge. The panel should be comprising the following: (Electrical power Panel )
-
-
-
... More
Incomer 200 amp .Four Pole 25 KA,Ics=100% Icu, MCCB, conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas Make L&T , Legrand, Schneider=1Nos
-
-
-
... More
Digital Ammetre , Voltmetre , Red Yellow and blue phase indicators with the selector switch and CT's , control MCB of 2 AMP. Wiring should be done with 1.5mm2 copper conductor cable =1 set
-
-
-
... More
TPN Alumnium bus bar 200Amp having 100% neutral with heat shrinkable colored sleeves and bus bar supports at required interval complete for cross section . The current capcity density of aluminium bus shall be 1.0 Amp / sq.mm = 1 set
-
-
-
... More
Outgoing 63 AMP MCCB TP 25 KA,Ics=100% Icu, conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas= 6 nos
-
-
-
... More
dummy =2 nos
-
-
-
... More
All interconnection /termination shall be solid aluminium. All the MCCB shall have rotary handels for ease operation and stand of panel and face sheet of stand shall also be included in the panel. Approval of drawing is mandatory before manufacturing of panel without approval of drawing panel shall be rejected without information. (NS)
1
112620
112620
... More
Supply and erection ,commissioning , testing of factory fabricated free standing fully compactable indoor type LT panel made out of 1.6 mm thick MS sheet and having suitable size cable alley, bus bar chamber and switch compartment complete with colour coded bus bar of Aluminium bus bar 1.0 Amp/ Sq mm capacity for main bus bar to switch and from switch to cable alley or cable termination. The panel shall be powder coated after applying the pre treatment with the approved colour. The panel shall be fabricated as per approved drawings as directed by the Engineer-in-Charge. The panel should be comprising the following: ( plumbing Panel )
-
-
-
... More
Incomer 125 amp .Four Pole 25KA,Ics=100% Icu, MCCB, conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas Make L&T , Legrand, Schneider=1Nos
-
-
-
... More
Digital Ammetre , Voltmetre , Red Yellow and blue phase indicators with the selector switch and CT's , control MCB of 2 AMP. Wiring should be done with 1.5mm2 copper conductor cable =1 set
-
-
-
... More
TPN Alumnium bus bar 150 Amp having 100% neutral with heat shrinkable colored sleeves and bus bar supports at required interval complete for cross section . The current capcity density of aluminium bus shall be 1.6 Amp / sq.mm = 1 set
-
-
-
... More
Outgoing 63 AMP MCCB TP 25 KA, Ics=100% Icu ,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas= 5 nos
-
-
-
... More
outgoing 32 Amp MCB DP C curve 10 ka = 5 Nos
-
-
-
... More
dummy =2 nos
-
-
-
... More
All interconnection /termination shall be solid aluminium. All the MCCB shall have rotary handels for ease operation and stand of panel and face sheet of stand shall also be included in the panel. Approval of drawing is mandatory before manufacturing of panel without approval of drawing panel shall be rejected without information.(NS)
1
121926
121926
... More
Supply and erection ,commissioning , testing of factory fabricated free standing fully compactable indoor type LT panel made out of 1.6 mm thick MS sheet and having suitable size cable alley, bus bar chamber and switch compartment complete with colour coded bus bar of Aluminium bus bar 1.0 Amp/ Sq mm. capacity for main bus bar to switch and from switch to cable alley or cable termination. The panel shall be powder coated after applying the pre treatment with the approved colour. The panel shall be fabricated as per approved drawings as directed by the Engineer-in-Charge. The panel should be comprising the following: ( UPS Panel Stage Side )
-
-
-
... More
Incomer 125 amp .Four Pole 25 KA,Ics=100% Icu, MCCB onforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clasMake L&T , Legrand, Schneider=1Nos
-
-
-
... More
Digital Ammetre , Voltmetre , Red Yellow and blue phase indicators with the selector switch and CT's , control MCB of 2 AMP. Wiring should be done with 1.5mm2 copper conductor cable =1 set
-
-
-
... More
TPN Alumnium bus bar 150Amp having 100% neutral with heat shrinkable colored sleeves and bus bar supports at required interval complete for cross section . The current capcity density of aluminium bus shall be 1.0 Amp / sq.mm = 1 set
-
-
-
... More
Outgoing 63 AMP MCCB TP 25 KA Ics=100% Icu,conforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas = 5 nos
-
-
-
... More
dummy =2 nos
-
-
-
... More
All interconnection /termination shall be solid aluminium. All the MCCB shall have rotary handels for ease operation and stand of panel and face sheet of stand shall also be included in the panel. Approval of drawing is mandatory before manufacturing of panel without approval of drawing panel shall be rejected without information. (NS)
1
115276
115276
... More
Supply, Installation, Testing and Commissioning of 1 (One) number 24 V Battery Charger & 2 (Two) numbers of 12V 180 AH maintenance free sealed lead acid batteries, Battery Charger shall be solid state, full wave fully controlled bridge, input suitable for single phase 230V AC suppply, conforming to degree of protection IP-42, Sheet steel enclosure 2 mm thick with automatic voltage regulation, current limiting circuitary, auto cut facility, smooth filter circuit switches, Ammeter & voltmeter on DC side, phase indicating lamps (LED type) on AC side complete in all respect with float and boost/ buck charging, switchgear, earthing, powder coated painting etc as required. (NS)
1
61513
61513
... More
Supplying of Rubber hand gloves suitable for 11KV complete in all respect to the entire satisfaction of engineer incharge .(NS)
2
500
1000
... More
Supplying and fixing of Shock treatment chart both in Hindi & English complete in all repect to the entire satisfaction of engineer incharge (NS)
2
1045
2090
... More
Supply of First aid box containing material as prescribed by St. John Ambulance brigade OR Indian Red Cross complete as required. (NS)
1
500
500
... More
Supply and fixing single line diagram, schematic diagrams etc. of A1 size on suitable Aluminium sheet including lamination etc. as required complete including fixing the same on wall. (NS)
1
1045
1045
... More
Supply fixing, testing commissioning of 8.5/10 watt LED aviation light burninh hours 1,00,000 hours , lux level 1 mtr minimum 30lux with 3 to 4 mtr pole s rquired at site complete with rquired connection wiring lead rquired framed structre ,welding etc to hold the pole compete in al respect to the entire satisfaction of engineer incharge makes Havells/wipro/ phillips . (NS)
1
16211
16211
... More
Supply and erection outdoor armoured fiber cable single mode 12 core complete in all respect to the entire satisfaction of engineer incharge make Amp, Molex, DG sole (NS)
1400
85
119000
... More
Digging with HDD of Hard and soft soil 3 to 6 mtr deep with required chamber for inspection of cables .the camper shall be required every 100 mtr in hard soil with proper plastering , brick work complete in all rspect to the entire satisfaction of engineer incharge . (NS)
1200
250
300000
... More
Supply installation and commissioning of 19" aluminium based 12 port LIU box fully loaded LC type rack mountable suitable for O.F.C connection , bare fire splicing and 2 mtr fiber patch corde LC to PC protection with accessories complete in all respect to the entire satisfaction of engineer incharge make molex, Amp, DG sole (NS)
3
22000
66000
... More
Supply and erection of 42 U floor standing steel network rack wth front glass door , backdoor ventilation ,door lock, power distribution socket 15/ 5 amp 10 nos sockets and 5 nos mounting mounting hardware fully loaded black powder coated colour with life time warranty complete in all respect to the entire satisfaction of engineer incharge. make Comrack, Retal, Gardin (NS)
2
60000
120000
... More
Supply and erection of 9 U wall mounted steel nework rack wth front glass door , lock power distribution socket 5 amp and mounting hardware 1 make Comrack, Retal, Gardin (NS)
4
7080
28320
... More
supply and erection of Layer 3 switch with 16x 1 GSFP ports+ 8x 1 G SFP /RJ45 COMBO PORTS +4X10G SFPP uplinl/stacking ports with two hot swappable AC+AC power supplies, USB, oob, includes a cloud controller /NMS license and a 3 year online activation warranty.complete in all respect to the entire satisfcation of engineer incharge make Quantum /Cisco/Arista/Jupitar (NS)
1
152000
152000
... More
Supply and erection of networking switch , 24 x 10/100/1000 base -T ports with 4 x10 G fiber uplink, 410 watt POE budget includes cloud controller licence / NMS and 3 year online activation warranty complete in all respect to the entire satisfcation of engineer incharge . (NS)
4
95000
380000
... More
Supply and erection of indoor Dual band 802.11 ax indoor wireless acess points, 4 x 4:4 streams, 2 x1/2.5 G N base -T port with NMS 3 year complete in all respect to the entire satisfaction of engineer incharge . Make Amp/ Molex/DG Sole (NS)
14
25000
350000
... More
Supply and erection of Cat 6 24 Port Patch Panel complete in all respect to the entire satisfaction of engineer incharge (NS)
5
8500
42500
... More
Supply and erection of Cat 6 UTP Patch cord 1 mtr information outlet complete in all respect to the entire satisfaction of engineer incharge (NS)
60
280
16800
... More
Supply and erection of Cat 6 UTP Patch cord 2 mtr information outlet complete in all respect to the entire satisfaction of engineer incharge (NS)
50
350
17500
... More
Supply and erection of Cat 6 UTP Patch cord 10 mtr information outlet complete in all respect to the entire satisfaction of engineer incharge (NS)
10
550
5500
... More
Supply and erection of HDPE Pipe 33/40 mm complete in all respect to the entire satisfaction of engineer incharge . (NS)
1000
82
82000
... More
Supply and erection of I/O (input/output) link including cost of box with punching for the same in any height including lead and lift complete in all respect to the entire satisfaction of engineer incharge . Make D link / Schenider/ Goldmedal (NS)
50
438
21900
... More
Penta scanning of internet points with the help of penta scanning machine including labour charges to operate it complete in all respect to the entire satisfaation of engineer incharge. (NS)
50
88
4400
... More
Supply, Installation, Testing and Commissioning of outgoing 11 kV, 350 MVA (18.4 kA), 630Amp, HT Panel Vacuum circuit breaker Switchboard , cubicle type, made out of 2mm thick sheet steel, totally enclosed, IP 4X, 50 deg. C ambient temperature, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, powder coated painting, suitable for operation on 11 kV +/- 10%, 3ph, 50 Hz +/- 5% AC system with copper busbars, Vacuum circuit breaker mounted on horizontally withdrawable truck including supply and installation of the following components as per Technical specifications, Technical particulars. (NS)
-
-
-
... More
11 kV HT Panel comprising of
-
-
-
... More
1 No. Outgoing Vacuum Circuit Breaker - 630 A, 3 pole, 18.4 kA
-
-
-
... More
Breaker control switch.
-
-
-
... More
24 V DC Tripping Coil.
-
-
-
... More
24 V DC Closing Coil.
-
-
-
... More
240 V AC spring charge motor.
-
-
-
... More
Set of ON/ OFF indicating lamps.
-
-
-
... More
Set of Phase indicating lamps (RYB).
-
-
-
... More
Clear lamp for trip circuit health supply.
-
-
-
... More
Digital ammeter with selector switch.
-
-
-
... More
Digital Trivector Meter
-
-
-
... More
Digital Frequency Meter
-
-
-
... More
Digital Power Factor Meter
-
-
-
... More
Aux. relays for Anti Pumping & indication.
-
-
-
... More
Tripping relay for fault.
-
-
-
... More
Trip circuit supervision relay.
-
-
-
... More
Tripping relay for each transformer fault.
-
-
-
... More
Master Trip circuit relay.
-
-
-
... More
3 over current IDMT relay with instantaneous high set element range 50 – 2000%
-
-
-
... More
Earth fault relay range 20 – 80% with series stabilizing resistor and PS class CT’s.
-
-
-
... More
3 Nos. Cast resin CTs of dual ratio 30 - 60 / 5 Amps CL:0.5, 5P10, 15 VA.
-
-
-
... More
Alarm annunciator with 12 windows and buzzer, ACK, rest, test push button for transformer faults and electrical faults.
-
-
-
... More
Suitable space for termination of 1 No. 3 C x 185 sq.mm XLPE cable as incoming.
-
-
-
... More
11 kV HT Board complete as required
2
620737
1241474
... More
Design, Manufacturing, Supply, Installation, Testing & Commissioning of indoor, copper wound, Cast Resin 'Dry Type', Non-inflammable Distribution Transformer of continuous ratings, 11 kV/ 0.433 kV, 1000 kVA, 3 phase 50Hz having Vector group DYN-11, air cooled non-hygroscopic with cable termination box suitable for 11 kV, 3 core 185 sq.mm HT XLPE aluminium conductor cable on HV side & 3x3.5 x300 sq mm XLPE cable connection arrangement on LT side with standard fittings & accessories, complete as per specification & Technical particular, WTI (Winding Temperature Indicator) with alarm & trip including control wiring, capable to withstand high short circuit & High impulse strength complete with range of (ON Load Tap Changer) on H.V side shall be +5% to -15% in steps of 1.25% i.e 17 No. equal steps as per technical specifications & conforming to IS 2026-1977 & IS 11171, IEC 726. , ISO 9001-2015,14001-2015 make voltamp , crompton, ABB, Sudhir. The Transformer shall be suitable for parallel operation with the existing transformer
-
-
-
... More
Winding material 99.9% Electrolytic copper
-
-
-
... More
Temperature rise (winding) above ambient 50 degree C =90 degree c
-
-
-
... More
Loss at 50% Load at rated voltage and frequency AN = 4.5 KW( Max)
-
-
-
... More
Loss at 100% Load at rated 75 degree C and principle tap AN = 12 KW( Max)
-
-
-
... More
Inpedence at 75 dgree C= 5% (IS TOL)
-
-
-
... More
Enclosure Protection class IP-23 for indoor
-
-
-
... More
Maximum Efficiency = 99.114% @ 44.721 % Load
-
-
-
... More
Vector Group =Dyn 11
-
-
-
... More
Connection Delta/ Star
-
-
-
... More
Insulation Level =HV& LV-Uniform
-
-
-
... More
HV (Kvp/KVrms) =75/28
-
-
-
... More
LV (Kvp/KVrms) = -/3
-
-
-
... More
HV side High voltage withstand Test =28 KV
-
-
-
... More
LV Side With Stand Test 3 KV
-
-
-
... More
In Substation
-
-
-
... More
Winding Temperature indicator with PT100 sensors (NS)
1
3392144
3392144
... More
Supply and erection ,commissioning , testing of factory fabricated free standing fully compactable indoor type LT panel made out of 1.6 mm thick MS sheet and having suitable size cable alley, bus bar chamber and switch compartment complete with colour coded bus bar Aluminium bus bar 1.0 Amp/ Sq mm capacity for main bus bar to switch and from switch to cable alley or cable termination. The panel shall be powder coated after applying the pre treatment with the approved colour. The panel shall be fabricated as per approved drawings as directed by the Engineer-in-Charge. The panel should be comprising the following: ( Incomer Panel for transformer - 2)
-
-
-
... More
Incomer 1600 amp .Four Pole Electrical operated draw out type air circuit breaker with microprocessor release ubit sort circuit , overcurrent and earth fault protection with adjustable setting as per specification and 50 KA,Icu=Ics=Icw(1Sec)=100% Icu,onforms to IS/IEC 60947-2, adustable overload setting, short circuit setting, inbuilt instantaneous protection , variavle trip clas Make L&T , Legrand, Schneider=1Nos
-
-
-
... More
Digital Ammetre , Voltmetre , Red Yellow and blue phase indicators with the selector switch and CT's , control MCB of 2 AMP. Wiring should be done with 1.5mm2 copper conductor cable =1 set
-
-
-
... More
TPN Alumnium bus bar 2000Amp having 100% neutral with heat shrinkable colored sleeves and bus bar supports at required interval complete for cross section . The current capcity density of aluminium bus shall be 1.0 Amp / sq.mm = 1 set
-
-
-
... More
The outgoing of Panel shall be terminated with Existing TTA Panel with Proper BUS Bar complete set . The cost of panel shal (NS)
1
376188
376188
... More
Supply/ Installation Testing & commissioning of Adoptor box/end box 11 KV for interconnection the new VCB with old and existing VCB with entire connection complete required Kit complete in all respect to the entire satisafaction of engineer incharge . (NS)
1
58501
58501
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%