Panjab University Tender

All kinds of soil (Ref: N.S.)

Providing and laying 60mm thick factory made chamfered edge machine moulded interlock paver blocks of Approved make reflective matt finish of two equal colours i.e. grey and red laid over 100 mm thick cement concrete 1:8:16 with 20 mm thick cement mortar 1:4. Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref: N.S.)

Providing and laying and making Kerb 23cm wide and 9cm (avg.) thickness of cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) including cement pointing 1:3 on joints etc. Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref: N.S.)

Providing and making of Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works and applying a priming coat of approved steel primer and two coats of approved synthetic enamal paint. complete in all respect to the entire satisfaction of the Engineer-in-Charge.(Ref: N.S.)

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5 km for all lifts, complete as per directions of Engineer-in-charge.

Providing & making road gullies letter box type of size 4'-3"x3'-3"x2'-0" (average depth) in first class bricks with cement mortar 1:4 including base flooring of required thickness in PCC 1:2:4. The inside wall to be finished with 12mm thick cement plaster with neat floating coat of cement. The base of wall footing shall be made in PCC 1:8:16, the top cover of gully shall have 2’-0” x 1’-6” 4nos. RCC perforated cover. complete in all respect to entire satisfaction of engineer in charge.(Ref: N.S.)

Providing, laying, spreading and compacting granular sub base material 150mm thick (by taking material 1.92 cum for 10 sqm area) of natural sand, morrum gravel, crushed stone or combination thereof as per MORT&H specifications, confirming of clause 401 coarse graded grading-1 as per table-400.2 of MORT&H specification including spreading on the prepared subgrade with the help of motor grader or adequate capacity mainteaning the required slope and grade during operation and rolling with 8-10 tonnes with the grade and cross fall (camber) to be checked and any high spot or depressing which becomes a apparent, corrected by removing and adding fresh material including the cost of tools and plants, carriage of material from stacks, templates, barrier,lighting arrangement at night, chowkidar and maintenance of diversion etc., as per MORT&H specification, density of GSB as laid 2 grm/cc. Complete in all respect to the entire satisfaction of the Engineer-in-charge.(Ref: N.S.)