Northern Railway Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
B Class
Bid Capacity
... View More
The formula for bid capacity is V/N, where V is the advertised value of the tender in crores of Rupees and N is the number of years prescribed for completion of work for which bids have been invited.
Technical Capacity
... View More
The required prior work experience for the bidder includes successfully completing or substantially completing any one of the following categories of work(s) during the last 7 years: (i) Three similar works each costing not less than 30% of the advertised value of the tender, (ii) Two similar works each costing not less than 40% of the advertised value of the tender, or (iii) One similar work costing not less than 60% of the advertised value of the tender. The similar works contract should be related to "Supply, erection and commissioning of water supplying facility/Quick water supply system with pressure boosting arrangements and automation in Railway or Government or public sector organization".
Costs
EMD
₹ 4,71,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Setting Up Of Quick Watering Arrangements At Amritsar Station
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
06-2025-QWS-ASR-FEROZPUR DIVISION-MECHANICAL/NORTHERN RLYTender No
06-2025-QWS-ASRTender Authority
Northern Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Sch-4, item.no 4j 1.5 Sq mm 6 core copper cable for control of Electric valve. (Inclusive
-
-
14
... More
Supply, fixing, testing, and commissioning of modular type 6 pin socket 6/15 Amps as
-
-
6
... More
Sch-14, item.no 1 2KVA industrial UPS with one hour Battery backup with cables.
-
-
30
... More
Sch-4, item.no 4c Basket type in Line strainer for pump sets (Inclusive of 18% GST)
2
73567
147135.54
... More
NS Item No. 5 Supply & Laying of MS Casing pipe MS 350 mm Casing Pipe for track
-
-
46
... More
Sch-4, item.no 4m Hydro pneumatic Tank (Inclusive of 18% GST)
1
63122
63122.41
... More
Development of tubewell with compressor of 550cfm at a working pressure 600 PSIB including cost of fuel, consumable store, oil T&P's etc. complete job as per instruvtions of site
120
1260
151243.2
... More
Carrying out soil investingation at site of RCC tank of bearing capacity and other 3 parameters at the reqired depth and then desgning the foundation of water tank as per relvant IS code and as per staisfaction of reputed/approved recongined engineering labotary/college as approved by the site encharge(with contractor own tools and equipment if need be) as per special
1
44627
44627.7
... More
NS Item No. 3 GI elbow, 25mm (185 gm)- Misc Fittings (Rate in KGs) (Inclusive of 18%
-
-
44
... More
Supply and Erection of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar Metal boxes boards are to be concealed in the wall for 4
15
174
2616.45
... More
Supply and Erection of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar Metal boxes boards are to be concealed in the wall for 8
10
346
3469.3
... More
Sch-17, item.no 1 Supply and Installation of Indoor Electrical Fittings with Tube Light
-
-
33
... More
Sch-4, item.no 4f Butter Fly valve 200 mm (Inclusive of 18% GST)
13
20041
260535.21
... More
Sch-3, item.no 3 Sluice valve 1 No for size 300 mm along with fitting job (Inclusive of
-
-
4
... More
Sch-9, item.no 1 Supply and fixing of Galvanized M.S. steel nipple of 25 mm jet nipple
-
-
25
... More
Supply, fixing, testing and commissioning Sluice Valve 3 inch dia and Non return Valve 3 inch dia and CI bends complete with connection etc. of make Standard, BEER, or similar conforming
2
6049
12099.2
... More
Sch-24, item.no 1 Painting of Hydrants pipe including valves (Inclusive of 18% GST)
3200
70
225440
... More
Sch-1, item. no 1 Fabricated MS container to be delivered to site with complete pump 1 room facility prepackaged steel enclose ready to install at site package pump house. It is to accommodate the three no's pumps, electrical control panels and allied fittings with forced air circulating by exhaust fans & electrical fittings. Size of container required is 10x4x0.2 mtrs (Inclusive
1
1032296
1032296.83
... More
NS Item No. 7 Providing and fixing C.I. Sluice valaves (With Cap)/Gate Valve complete
-
-
48
... More
Sch-5, item.no 5a Fabrication items like spool/tee/distance pieces etc as per site
-
-
19
... More
Design, manufacture and supply, fixing of Digital programmable fully automatic star 20 delta starter control panel suitable for 30 HP submersible pump, wall mounting type made up in sheet steel enclosure of 16 SWG of power coated paint with the following electrical components/switchgears housed and neatly wired using multistranded PVC insulated copper cable certified to IS 694 or latest. The panel shall have provision at the bottom for the entry and exit of incoming and outgoing cables as
4
39670
158680.12
... More
Supply, fixing, testing, and commissioning of modular type switch 16 Amps as per
-
-
5
... More
NS Item No. 4 GI Nipple, 25mm dia, 50mm long (90 gm)- Misc Fittings (Rate in KGs)
-
-
45
... More
Supply, Erection, Fixing, Testing and commissing of LT panel having incoming 1x250 Amp MCCB 35kA FP with outgoing of 2x125 Amp MCCB 35 kA FP, 1x63 Amp MCCB 35 kA FP and 4x32 Amp 35 KA FP MCCB with Amp meter, volt meter and indicator. Make of MCCB &MCB M/s Legrand,
1
180134
180134.15
... More
Sch-4, item.no 4h Flow meter 150 MB (main Bore) with fittings 15 mm (Inclusive of 18%
-
-
12
... More
Design, manufacturing of floor mounted MS feeder post made of MS sheet 16 SWG Die pressed of size 550mm x 450mm x 275mm deep complete with Aluminium bus bars four Nos. having cable glands 2 Nos. duly grouted with cement concrete ratio 1:2:4 duly earthed with earthing terminals.
25
3807
95176.75
... More
Supply, fixing, testing, and commissioning of modular type multi socket 6 Amps 5 pin
-
-
7
... More
NS Item No. 6 In RSJ, Tees, angles and channels - MS Clamp for hydrant assembly
-
-
47
... More
a) Drilling 650 mm dia bore by hydraulic rotary drilling 0.0 mtr to 150 mtr
300
2237
671172
... More
Transportation, Laying, underground/road/Railway track, recessing in platform /wall 24 along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminium Clamping socket/lugs, testing
3000
60
180420
... More
NS-2) Supplying and fixing of gangway with M.B chequered plate 0.75 m having 7 mm thickness and length as approved by the site engineer The cost include cutting to size drilling of 14 2 mm die holes, supplying and foung 14mm dia nuts and bolts with 5mm thick 50mm da washer a as per RDSO drawing number B-1636/1/R-2 of approved design and specification as per annexure A and welding with contractor T & P L& M. lead, lift, loading, unloading, transporting, scaffolding taxes etc. complete. Including its galvanizing as directed by the engineer in charge. So nothing extra will be paid
4
87919
351676.12
... More
Earthing arrangement by providing earth electrode of GI pipe 50 mm dia (B class) 4.5 14 meter long with flange including 6 SWG GI earth wire from earth pipe to connecting point on switch board to distribution board/pole etc. as per site requirement including masonry enclosure as per Tech specification at annexure 'A' relevant ISS & IE rules and site requirements. A suitable CI/MS/RCC cover
15
2306
34590
... More
Sch-5, item.no 5f Providing of GI M.S Flanged 150 m B class (Inclusive of 18% GST)
350
397
139268.5
... More
Sch-19, item.no 1 Supply and installation of ceiling fans 48" with regulator (Inclusive of
-
-
35
... More
b) Drilling 650mm dia bore from 150.0mtr to 250 mtr. Below ground level (Size of bore
-
-
5
... More
Supplying and packing special screened gravel of size as directed by site engineer around the liner assembly to the entire depth of boring complete upto 200 mtr.including all labour, material,T&P, loading , unloading, leading, taxes, octroi complete job as per instructions of site
-
-
10
... More
Sch-20, item.no 1 Supply and Installation of Exhaust Fan 18" (Inclusive of 18% GST)
4
3665
14662.16
... More
Sch-4, item.no 4l Supply M.S common Header 200 mm dia for delivery to hydrant pipe line to PF Hydrant leading pipes with necessary flanged arrangement, bolts nut including contractor
650
3589
2333142.5
... More
Sch-15, item.no 1 Supply, erection and connecting of maintenace free earth by 17.2 31 mm dia low carbon steel rod. Coated with 205 microns thick copper 3 mtrs long with clamps and corbon based earth enhancing compound of LORESCO BACKFILL material not less than 40 kgs for each. Exothermic welding and earth connection by SWG GI wire of length up to 6 mtr5s for connectiong the earth to equipment generally confirming to RDSO'S SPECIFICATION NO.
6
28914
173486.04
... More
Sch-6, item.no 1 Supply of 50 mm air valves along with fittings. (Inclusive of 18% GST)
5
7124
35620.45
... More
Sch-4, item.no 4a Pump set 40 HP. 1 set= 5Nos (Pump set of 40 HP each along with Electric motor.) & Pump should be of along with Electric motor). Motor & Pump should be of standard
1
1358592
1358592.41
... More
Sch-18, item.no 1 Supply and Installation of Out Door fitting in all side of Container
-
-
34
... More
Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as
-
-
15
... More
Sch-4, item.no 4n Cable for pumps to panel 16 sq. mm copper 4 core including lugs
-
-
18
... More
Supply, fixing, testing, and commissioning of modular type switch 6/10 Amps as per
-
-
4
... More
Sch-21, item.no 1 Supply and Installation of 1.5 Ton Split AC with Stablizer for elctrical
-
-
37
... More
Sch-5, item.no 5c Supply of MS coupling size 25 mm with threading to connect the GI
-
-
21
... More
Wiring for light points with supply and laying of FRLS PVC insulated multistranded copper conductor cable 1100 Volt 1.5 Sq.mm multi stranded confirming to IS-694 latest in the existing
2500
14
35375
... More
Description: NS-1) Item rate for supply and fixing GRP/ SMC (sheet moulding compound) panel tanks ISI marks on each panel with certificate of ISI (IS 14399 of 1996). The tank shall be assembled by using GRP / SMC panel of 1m x 1m, 1x2m or 1x1.5m as per site requirement on Independent steel staging of 10 m height or as required which shall be paid separately.The panel 1 should be stand hydrostatic pressure of at least 4 times the working load and should be provided with HDG nut,bolts/washer, rubber foam gasket, cleats, including air vent PVC support of 110 mm dia for the roof top panel. The tank will be manufacture as per manufacturers specification and meets all ISI standards. All MS parts inside/outside should be hot dip galvanized to avoid rust .The tank should have ladders inside and outside, provision of inlet/ outlet / overflow /drain etc. complete in all respects with all leads and lift to any distance as a complete job. The rate includes all lead, lifting at any height, loading, unloading, all taxes, charges, all labour and material , T & P as a complete job nothing extra
400000
15
6328000
... More
Sch-5, item.no 5b Supply & Fixing of G.I 150 mm & Fabrication of pipes. The pipes should be fixed with bellow expansion joints to compensate for shrinkage & Expansion due to weather
3300
2560
8448891
... More
Sch-4, item.no 4g Non return valve 200 mm (Inclusive of 18% GST)
5
15326
76634
... More
Sch-2, item.no 2 1 No MS Pipe line size 300 mm from Over Head Tank ) cap to
-
-
3
... More
Sch-4, item.no 4b Common skid Mounting for pumps sets (Inclusive of 18% GST)
1
78685
78685.15
... More
Supplying & Lowering 200 mm dia MS black pipe 8mm thick ERW with all labour and materials, T&P, loading , unloading, leading, taxes, octroi complete job as per instructions of site
100
2418
241826
... More
NS Item No. 1 Providing and fixing C.I. Sluice valaves (With Cap) complete with Bolts,
-
-
42
... More
Supply, fixing, testing and commissioning of LED light luminaries, having system 12 wattage 1x > 18w (Max.), LED tube and inbuilt LED driver, CRCA body powder coated, complete with all mounting arrangement, accessories. The LED based 4 ft. tube light (lamp) shall be of make Phillips, Bajaj,Havells or similar conforming to CEE/NR's spec. No. CEE/NR/121- Elect/PS/2018 (Rev- '3'), &
25
543
13580
... More
Sch-4, item.no 4k 1.5 Sq mm 6 core copper cable for control of flow meter (Inclusive of
-
-
15
... More
Sch-10, item.no 1 Supply and fixing of Galvanized M>S steel nipple of 25 mm jet nipple
-
-
26
... More
Supply and fixing of GI pipe B Class 3 inch dia with MS flanges holding, locking system for safety and checking dropping down of submersible pump upto non return valve and connection
140
583
81663.4
... More
For further Development with OPU
68
787
53561.56
... More
Charges for logging the well by electric logger
2
39609
79219.06
... More
Sch-11, item.no 1 Supply of SS304 PTFE seat 25 mm dia Brass Bal valve KOR valve India(P) Ltd., or TBS Engineers(P) Ltd or similar make with IS 9001-2000 certificate or ISI standard
1444
1663
2401805.2
... More
Supply of L.T XLPE size 4 Core X 240 sq mm, PVC outer sheathed armoured with
-
-
23
... More
Supplying, laying, testing and commissioning of FRLS 1.0 sq mm PVC insulated multistranded copper conductor s/core cable1100 Volt conforming to IS-694 (latest version), make
1800
12
22212
... More
Supply, fixing,testing and commissioning of 3-pin ceiling rose 5 Amp capacity on existing MS/PVC conduit junction boxes/casing caping Anchor, Cona, Kinjal, SSK or equivalent as per
40
13
542.8
... More
Supply & erection of 103 mm Inner dia Double Walled Corrugated pipe in ground under
-
-
25
... More
Supplying & fixing in position suitable bail plug with hook reducer 12/8" for 80mm X 200mm dia central guide well cap and MS clamps etc.with all labour, material,T&P, loading ,
1
10397
10397.86
... More
Sch-5, item.no 5d Making Hole in GI Hydrant pipe line every two meter and fixing the
-
-
22
... More
Supplying, Fixing & Lowering 200 mm dia all welded low carbon galvanized steel (LCG) cage typed V-wire wound screen conferming to ISI 8110-2000 , IS: 4270- 92 and compsition of material as per ISI -1012 of outer dia 221 mm equivalent thickness 6.62 mm, tensile load 14000 kg
60
5069
304162.2
... More
Sch-13, item.no 1 Diesel Generator set silent 125 KVA (Inclusive of 18% GST)
1
1313312
1313312.14
... More
Sch-12, item.no 12a Control Panel Inclusion of the following (I) to (IX) (I) Design, fabrication, transportation, supply, erection and commissioning of LT cubical panel 3 phase and neutral 415 V. 4 wire, free standing floor mounted, LT panel made up of 14 SWG CRCA (Cold rolled Carbon Annealed) Sheet after seven tank process and painting with EPOXY powder coaitng. The panel shall consist of suitable rating TPN (Triple Pole Neutral tinned copper bus bar suported with heat shrinkable sleeves. The metering shall be provided as specified. The panel shal have short circuit with standing capacity of minimum 50 KA (RMS) power frequecny test and consist of the switch gear as mentioned below. The panel shall be mounted on channels including supply and fixing as per specification. The complete work has to be carried out by the contractor including masonry work. After 28 execution, all the feeder cables have to be connected to new panel with suitable cable glands as per the requirement of the Engineers at site. Air condition provision is to be made for entire control panel. The panel consists (II) 1 No. of 400 A., 4 Pole, 36 KA, MCCB(Molded case circuit Breaker) & 400 AP Chan over for incoming. (III) 4 No. of 100 A., 10 KA 4 Pole MCCB out going. (IV) 1 No. of 36 A., 10 KA 4 Pole MCB (Miniature Circuit Braker) out going. (V) 1 No. of 32 A., 10 KA 4 Pole MCB out going (VI) Along with multi functional digital meter similar to model No. EM-VIFPE. Of M/s HPL make with suitable ratio CTs (current Transformer) along with selector switches, LED phase indication pilot lamps (3 No's), and tinned copper bus bar of 1000 V along with rubber chequered sheets of size 1 m x length of panel of 12 mm thick as per IS 5424-1 No., complete. (VII) suitable set of capacitor 40 KVAR with auto manual APF Relay. (VIII) VFD (Variable Frequency Drive) 1 No. PLC 1 No. HMI with pressure treasures. (IX) suitable 40 HP star delta starter with auto manual selection mode and same starter will work on VFD
1
2183549
2183549.29
... More
Sch-23, item.no 1 Suction and Delivery Pressure Tranducer With Pressure Gauge With
-
-
39
... More
Supply and recessing/fixing of 25mm (Medium) PVC conduit pipe conforming to IS 9537/Pt.III/1983 or Latest Version with accessories,junction box, etc including making chase,
-
-
11
... More
Sch-16, item.no 1 SCADA for 500, Data analysis including of PC, LED 32'', keyboard,
-
-
32
... More
Sch-1a, item.no 1a Installation on civil foundation & Unloading and installation of
-
-
2
... More
NS Item No. 8 Power cable of 35 sq mm 4 core Cu alongwith lugs from DG panel to LT
35
2309
80845.8
... More
Supply of PVC insulated 3 core sheathed Flat copper submersible cable 1100volt grade
-
-
22
... More
Supply, Erection, Fixing, Testing and commissing of LT panel having incoming ACB 800 Amp o/g MCCB 4 pole 400 A = 4 No.,MCCB 4 pole 200 A =4 No., onload C.O.S. 4 pole 800 Amp = 1 with 800 Amp copper us bar for phases and 400 Amp for neutral as per NR Spec No.47/48
1
677143
677143.04
... More
"10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete" (Inclusive of 18% GST)
12000
102
1227000
... More
Supplying & Lowering 300 mm dia MS black pipe 9.5mm thick ERW with all labour and materials, T&P, loading , unloading, leading, taxes, octroi complete job as per instructions of site
135
4286
578692.35
... More
Sch-4, item.no 4e Delivery manifold with fittings & fitment work (Inclusive of 18% GST)
1
59326
59326.07
... More
NS Item No. 2 Butter Fly valve 150 mm (In Nos) (Inclusive of 18% GST)
6
25582
153494.46
... More
Sch-4, item.no 4d Suction manifold with fittings & fitment work (Inclusive of 18% GST)
2
59326
118652.14
... More
Supply & testing OF ISI MARKED ENERGY EFFICIENT SUBMERSIBLE PUMP SET ,800LPM 18 90 METER HEAD MAXIMUM OD 146MM WITH SUBMERSIBLE CABLE OF SUITABLE SIZE OF 3 METER LENGTH , 2900 RPM WITH COUPLED MOTOR OF CAPACITY 25 HP SUITABLE FAN OPERATION ON 415V+_ 5% ,3 PHASE 50 HZ CONFIRMING TO IS 8034-2018 OR LATEST. Make- KSB, Amrut & Sabur or
4
46710
186840.2
... More
Sch-22, item.no 1 One computer Table and two charges and One small Cupboard
-
-
38
... More
"Sch-31, item.no 31a Sub estimate for erection of Rail to hold 150 mm dia main pipe 41 upto 2.3 mtrs from ground level and taking out of 150 mm existing water pipe line ( inclusive of all charges & GST ) with quantity 2000 Mtr ( includes dismantling of existing hydrant pipe line from rail post and handing over to store , earth work, carriage of material to store, plain concrete,steel and
1
515654
515654.35
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%