Military Engineer Services Tender

M&L for scrapping surfaces of roof by wire brushing removing all loose dirt and cleaning and washing down the surgaces with water complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 20mm to maintain a slope of 1:100, complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only complete all as specified and directed.

M&L for PCC cement concete tiles of size 250x250 and 20 to 25mm thick laid as in roof floor over 15mm thick (1:4) cement bed, set, jointing and pointing with grey cement and pigment complete all as specified and directed.

M&L for surface preparation & Cleaning the surface and made free of dirt, foregin particles laitance followed by grinding all protrusions to make surface modulated and including cement platering 20mm thick in cement mortar 1:4 incl mixing of liquid water proofing compound as per manufacture instruction on surfaces of floor etc finished even and smooth without using extra cement and making strips of size 30cm x 30cm. Thereafter, inspection for cracks on the surface caused by thermal expantion contraction. Cutting the grooves with suitable cutter machine in 'V groove filled with Repair mortar/Mircroconcrete/General purpose grout as recommended propertionaly as per recommendation of manufacturer. Making of Gollas at all the corners with Polymer modified mortar (1:4) Cement: Sand with 3.5% Acylic of Cement weight, Supplying and applying High build waterproofing coating based on pure hydrophobic polyurethane cold applied of spray /brush applied membrane with and elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, hardness (shore A scale) 80, solar reflectance of 84% as per A ASTM E903-96, SRI of 106, capilary absorption of 0.01kg/m2 h0.5 as per EN 1062-3, adhesion must be of > 2.0 N/mm2 as per EN 1542, artificial weathering must be passed as per EN 1062-11 temprature resistance must be in between -300C to +900C, no leakage upto 5 bars of water pressure as per DIN 1048 mm min 88% solid content. The system includes final top coat of high build waterproofing coating based on pure hydrophobic polyurethane white in color application in 2 coats with a total min consumption of 1.5 Kg per SQM in ratio 60% 40% in both coats respectively over a coat of epoxy primer 1:1:2 (Resin hardner:water) with a min consumption of 0.2 Kg per SQM. Application should be given by company for the product on company letterhead, complete all as specified and directed. Note: Resin is one of the component of PU Magnum Primer which is two components water based epoxy system, it is classified as SR-B2 0 according to EN 13813 having properties like color of pale yellow viscocity 900mPas, density 1.15kg/lt and adhesion of >3N/mm2. Hardener is one of the component of PU Magnum Primer, which is a two components water based epoxy system, it is classified as SR B2, 0 according to EN 13813 having properties like color of pale yellow, viscocity 37000mPa's, density 1.08kg/l and adhesion of >3N/mm2.

M&L for 40mm thick brick tiles (except tiles) laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed. Note : Old brick tiles obtained from dismantling shall be used in this item after proper cleaning / removing mortar incl 25mm thick mud plaster and 3mm thick leeping plaster.

M&L for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

Dismantling old unserviceable cement concrete/PVC water tanks of any description, capacity exc 250 and not exc 500 litres and removing from site including provision of PVC Water Storage Tank 500 ltr Capacity HDPE triple layered white coloured PVC Cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet Pipe connection including Tank cover including locking arrangement, Ball Valves high pressure of PTMT with Epoxy coated Aluminium Rod & high density plastic ball screwed for iron Pipe 20mm dia and (Min Weight 20mm-210gms) complete all as specified and as directed. Note (i) inlet, out let & wash out pipe will be measured and paid separately. The quoted rate is inclusive of tank nipple and minimum one union each on inlet and outlet of water tank as per size of pipe shall be provided.

Dismantling old unserviceable cement concrete/PVC water tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site including provision of PVC Water Storage Tank 1000 ltr Capacity double layered HDPE Cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet Pipe connection including locking arrangement,tank cover , Ball Valves high pressure of PTMT with Epoxy coated Aluminium Rod & high density plastic ball screwed for iron Pipe 20mm dia and (Min Weight 20mm-210gms) pvc tank cover complete all as specified and as directed. Note (i) inlet, out let & wash out pipe will be measured and paid separately. The quoted rate is inclusive of minimum one union each on inlet and outlet of water tank as per size of pipe shall be provided.

Disconnecting existing tanks of capacity exc. 250 but n exc. 500 litres, setting aside or lowering for cleaning etc and hoisting reconnecting and refixing in position complete all as specified and as directed.

Disconnecting existing tanks of capacity exc. 500 but n exc. 1000 litres, setting aside or lowering for cleaning etc and hoisting reconnecting and refixing in position complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (AC Rain water pipe/SWG pipe line) of any size or pattern including all fittings etc complete all as specified and as directed.

S&F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and as directed.

S&F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 75 mm bore of pipe etc complete all as specified and as directed.

S&F for PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and as directed.

S&F for PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and as directed.

Refixing 15mm bore GI steel water tubing medium grade fixed to walls complete all as specified and directed.

Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified and directed.

S&F for stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle chromium plated fancy type screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe fixed in repair complete all as specified and as directed.

S&F for stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle chromium plated fancy type screwed both ends for iron pipe or for unions for 20 mm bore dia of pipe fixed in repair complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified and directed.

M&L for fly ash Brick work using modular size bricks with sub class 'B' bricks curved on plan with mean radius not exc 6m with bricks roughly cut to radius or bricks with wedge shaped joints built in cement mortar 1:6 complete all as specified and directed.

M&L for taking down cement plaster from brick work or RCC surface and proper cleaning the surace with water and making efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface and including finally apply 15 mm thick plastering cement mortar in 1.3 with mixing of (URP 301) over treated surfaces and Applying 3mm thick wall care putty applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for taking down cement plaster from brick work or RCC surface and proper cleaning the surace with water and making efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface and including finally apply 10 mm thick plastering cement mortar in 1.6 with mixing of (URP 301) over treated surfaces and Applying 3mm thick wall care putty applying Two or more coats of oil bound distamper white or tinted with putty over a coat of primer on walls incl one coat of primer over & incl preparation of New surface of wall complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for Rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 finished fair and even with out using extra cement complete all as specified and as directed

M&L for complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

M&L for applying wall care putty in walls/ RCC surfaces/ soffits of chajjas/ roof projections/ cantilevers/ balcony etc (for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior/internal painting complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for Applying two coats of oil bound distamper white or tinted with putty over a coat of primer on walls incl one coat of primer over & incl preparation of old/New surface of wall all specified and directed.

Material & Labour for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material & Labour for one coat of oil bound distemper on interior wall surface including preparation of old surface complete all as specified and directed.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new/old plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces complete all as specified and directed.

Material & Labour for preparation of old surfaces and applying one coats of lime white wash over cieling complete all as specified and as directed.

M&L for PVC cowls of 100 mm dia complete all as specified and directed.

M&L for PVC cowls of 75 mm dia complete all as specified and directed.

S&F Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs (min. wt. 20mm-210gms) complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for vitrified tiles 8 to 9 mm thick double charged (Square / Rectangular ) polished , area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Non-skid joint free ,Non-skid ceramic tiles 7 to 8 mm thick (square/rec) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floor etc set and joined in neat cement slurry and pointed in coloured cement to match with the shade of tile over 15mm thick backing coat in C:M (1:4) set n joined with tile adhasive with notched trowel and pointed in grout of matching shade of tile complete all as specified and directed.

M&L for coloured glazed ceramic tiles (300 x 600 mm) x 7mmthick as in vertical surfaces such as skirtings, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick back coat in Cement Mortar (1:4), in complete all as specified and directed.

M&L vitrified tiles 8 to 9 mm thick double charged (Square / Rectangular ) polished with 1.2 m length & area of each tiles not exceeding 0.36 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 10 mm thick rendering in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Supplying and fixing in repairs Vitreous China countertop wash hand basin of oval shape incl CP waste coupling, fixed as per manufacturer's instruction complete all as specified and directed.

S&F in repair vitreous china premium/1st quality wall hung Center hole wash basin with padestal, white, flat back, min. size 550x400 mm, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections with PVC pipe upto Floor Trap/nahani trap incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed.

Supply and fixing in repairs floor mounting single piece vitreous china coloured wash down water closet pan (Pedestal pattern) with and including ‘P’ or ‘S’ trap, complete all as specified and as directed.

S&F in repairs Vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) with long arm S or P trap so that joint is avoided white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc, and incl all necessary accessories like rag bolts/gel gasket, spray jet etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed.

S&F vitreous china Orissa Pan water closet white colour of size 580X440mm white with (C I P trap long size) joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe etc , fixed in repair complete and making good to floor in CM 1:3 all as directed and specified.

S&F in Repairs flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed.

S&F in repair stainless steel toilet paper holder of size 150mm length 90mm width and of 70 mm height incl all necessary fittings complete all as specified and directed.

S&F in repair chromium plated shower roses with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified and directed.

S&F in repair Bib taps, suitable for 15 mm bore , as in repair cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe long body and fixed complete all as specified and directed.

S&F in repairs Pillar taps Fancy type 15mm bore, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and complete all as specified and directed.

S&F in repair health faucet with 15mm dia and 1.25 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete all as specified and directed.

S & F 15 mm dia Stop cock cast copper alloy fancy type CP with long shank and cup (concealed type) , screw down high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair angle stop cock 15mm bore fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of for unions complete all as specified and directed.

S&F in Repairs for 15mm dia central hole brass chromium plated basin swan neck mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete all as specified and directed.

S&F in repair 3 Pcs Brass Chrome Finish 3 in 1 Wall Mixer, Head Shower & Hand Shower Set for hot and cold water fancy type fixed with iron pipe 15 mm dia complete all as specified and directed.

S&F in Repairs for 15mm dia swan neck wall mixer brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dward wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm blowl size 410 x 330 x 160mm complete INCL WASTE COUPLING OF PTMT OF BORE 40MM complete all as specified and directed.

S&F in repair plantex Quartz Black/White kitchen sink (915mm x 460mm) including bowl size 410x330x160mm APS-2026 under counter basin including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size complete including waste coupling of PTMT of Bore 40mm complete all as specified and directed.

S & F ( in Repair) S/S plate rack size ( 900x750x250mm) of standard size weight not less then 5 kg complete all as specified and directed.

S&F in repairs brass Chromium plated tubular towel rail,20mm dia,D type,60cm long between flanges complete fixed in position complete all as specified and directed.

S & F for PVC Mirror cabinet of standard size (450x300mm),complete fixed as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified and directed.

Supplying and laying of 16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below of above ground Level) complete all as specified and directed.

M&L fo cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints and form work complete all as specified and directed.

S&F for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

Providing and fixing in position Mild steel bars , but 5mm dia and over upto and including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for cement concrete 1:1.5:3 for chullah hoods ,chajjas,stairways(except spiral staircase ) incl steps(square or spandril),string pieces,carriges etc complete any section straight or winding but excluding landings complete all as specified and directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for formwork to chullah hoods,chajjas,troughs and similar items incuding edges complete all as specified and directed.

Supply and fixed in repair brass chromium plated, towel ring, 20mm dia, complete all as specified and directed.

Supply and fixed in repair brass chromium plated, multi purpose towel rack 650mm long and 200mm width, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed

M&L for preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old wood surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F CI floor trap/nahani trap with long arm with grating including jointing to waste pipe in neat cement 75 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F in Repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F PTMT 450mm long shelf for wash basin complete all as specified and directed.

S&F Soap dish 110mm, vitreous China white, approximate size 160x 160x9mm complete all as specified and directed.

M&L for providing and laying 100mm dia UPVC soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

M&L for providing and fixing in position ,Salt-glazed stoneware gully traps,square or round mounted type 'P' 100x100mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with wooden beading french polished, etc. complete fixed in position all as specified and directed.

S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified and directed.

M&L for 10mm coloured paver tiles (endeura Tiles) of size 300 x 300mm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM 1:4 fixed in repairs complete all as specified and as directed.

M&L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with screed of 15mm in Cement Mortar 1:4 complete all as specified and directed.